Robert Bosch Tool IDX01 GCY Idefix User Manual Briefbogen

Download:
Mirror Download [FCC.gov]
Document ID	3161463
Application ID	WJWHMBO6wEFWGz+lHWWhWA==
Document Description	InstallationInstruction
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.74kB (184255 bits)
Date Submitted	2016-10-13 00:00:00
Date Available	2017-02-01 00:00:00
Creation Date	2016-09-19 10:41:49
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-09-19 10:41:49
Document Title	Briefbogen
Document Creator	Microsoft® Word 2013
Document Author:	Anja König

Power Tools
To whom it may concern
Robert Bosch GmbH
Postfach 10 01 56
70745 LeinfeldenEchterdingen
Visitors:
Max-Lang-Straße 40-46
70771 Leinfelden
Tel 0711 758-0
www.bosch.com
Applicant / Manufacturer Hardware
Robert Bosch GmbH
70745 Leinfelden-Echterdingen
Germany
Content
Instruction manual for
Device name:
Manufacturer part number:
FCC ID:
IC:
GCY Idefix
1600A00H6H
TXTIDX01
909H-IDX01
Instructions for physical implementation
The described transmitter is intended to be fixated with a screw in the screw
hole (black, see figure below):
To ensure an adequate performance of the antenna, the following
exclusion areas (red/green) for the components and screw hole need to be
adhered to, when implementing the described transmitter into a host device,
Registered Office: Stuttgart, Registration Court: Amtsgericht Stuttgart, HRB 14000;
Chairman of the Supervisory Board: Franz Fehrenbach; Managing Directors: Dr. Volkmar Denner,
Dr. Stefan Asenkerschbaumer, Dr. Rolf Bulander, Dr. Stefan Hartung, Dr. Markus Heyn, Dr. Dirk Hoheisel,
Christoph Kübel, Uwe Raschke, Dr. Werner Struth, Peter Ty roller
01 July 2016
Power Tools
see figure below:
Additionally, to ensure an adequate performance of the antenna, no
metal parts are allowed in the exclusion areas defined in green. No plastic is
allowed in the orange exclusion areas and no plastic or metal is allowed in the
black exclusion areas, see figure below:
Device Power Supply
The transmitter described in this document is intended to be supplied by an
external voltage supply:
Either directly with nominal 3V by a CR2032 coin cell via the corresponding
and/or with nominal 3.3V ± 2% indirectly by a host device with pins.
01 July 2016
Page 2 of 3
Power Tools
The connection for both external power supplies is realized by a PicoBlade™
(wire to board connector) which prevents unintended connection of standard
power supplies (such as micro-USB).
Feel free to contact us if additional guidance is required.
Yours sincerely
Robert Bosch GmbH
01 July 2016
Page 3 of 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : de-DE
Tagged PDF                      : Yes
Title                           : Briefbogen
Author                          : Anja König
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:09:19 10:41:49+02:00
Modify Date                     : 2016:09:19 10:41:49+02:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools