SAMYUNG ENC STR-6000A Marine DSC VHF Radio Telephone User Manual

SAMYUNG ENC Co., Ltd Marine DSC VHF Radio Telephone Users Manual

Users Manual

Download: SAMYUNG ENC STR-6000A Marine DSC VHF Radio Telephone User Manual
Mirror Download [FCC.gov]SAMYUNG ENC STR-6000A Marine DSC VHF Radio Telephone User Manual
Document ID653795
Application IDwY9m3/nmEyLDOJAdrycSMA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize151.59kB (1894846 bits)
Date Submitted2006-05-03 00:00:00
Date Available2006-05-03 00:00:00
Creation Date2006-05-02 18:12:12
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2006-05-03 09:55:13
Document TitleMicrosoft Word - STR-6000A영문취급설명서_FCC_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

MARINE DSC VHF RADIO TELEPHONE
FOR GMDSS
OPERATING MANUAL
STR- 6000A
SAMYUNGENC CO.,LTD.
INSTRUCTIONS
Please read this operating manual with care before turning on power.
1. How to transmit and stop Distress Call
— In performing Distress Call function, press
button and hold it down for
3(three) seconds until DISTRESS MESSAGE is seen. Then the whole display
unit will start flashing with a strong alarm. In transmitting Distress Call, the
transmission must be made based on the judgment of a person on duty. The
test of this function MUST NOT be made at all times because the test may
cause heavy damages to near-going vessels and search & rescue authorities
concerned.
— When the Distress Call is performed, the distress message will be
automatically transmitted and this transmission will be repeated at the
intervals of 3 minutes 30 seconds through 4 minutes 30 seconds. This
transmission will be repeated until the DSC (Digital Selective Calling) is
received by the authorities of the country to which the call is transmitted or
until any operation for ending the call is made. If any transmission is made by
accident, press
button to bring it to an end. Even though any operation for stop has
been
made, it is necessary for operator to contact CH16 to inform that the
transmission was made by mistake as the message was automatically
transmitted more than one time at least.
— When Distress Call is received, it is necessary to inform a person on duty
about this.
2. How to make the initial set-up in installation
For the below items, the initial set-up should be made in installation before its actual
operation. Please contact SAMYUNG ENC or any agent dealers for the information.
2-1 How to check out power supply
Input voltage in VHF main unit: Confirm that DC13.6V is supplied.
2-2 How to transmit and receive DSC
In order to use DSC function, make sure that any MMSI number available must be
input first.
3. Other instructions
3-1 In using Semi-Auto & Auto connection service with DSC, it is necessary to
check with the concerned authorities about the formalities of call charge because
the billing system has not yet been decided worldwide.
3-2 The paper used in DPU-414 PRINTER is a special one that is chromogenic with
thermo-chemistry reaction. Therefore, it is advisable to avoid the below-mentioned
cases as the paper tends to change its color or get discolored.
— Keeping under any places with heat, humidity and light
— Touching with sweat-wet hands
— Rubbing with any hard things
— Pasting with any organic solvents such as glue
— Applying with any oiled tapes
— Long time exposure to any vinyl chloride films
— Contacting diazo immediately after printout
— Contacting any wet copy
— Contacting any oiled solvents
Chapter 1. Introduction .................................................................................... 6
1.1. Introduction ....................................................................................................... 6
1.2. Features ............................................................................................................ 6
Chapter 2. Configuration ................................................................................. 8
2.1. Standards.......................................................................................................... 8
2.2. Option................................................................................................................ 8
Chapter 3. Specifications................................................................................. 9
3.1. STR-6000A Standards ...................................................................................... 9
3.2. Transmitting Unit ............................................................................................... 9
3.3. Receiving Unit ................................................................................................. 10
3.4. Dedicated Receiving Unit................................................................................ 10
Chapter 4. How to Operation ......................................................................... 11
4.1. Unit Description............................................................................................... 11
4.1.1. Front Panel ............................................................................................ 11
4.1.2. Microphone............................................................................................ 14
4.2. LCD Screen Description.................................................................................. 16
4.3. VHF Operation ................................................................................................ 17
4.3.1. Channel Selection ................................................................................. 17
4.3.1.1. Channel 16................................................................................... 17
4.3.1.2. Channel Mode Selection (ITU,USA,CAN).................................... 17
4.3.2. Weather Channel................................................................................... 18
4.3.3 Transmit and Receive............................................................................. 18
4.4. Menu Setup and Construction......................................................................... 20
4.4.1. Menu Construction ................................................................................ 20
4.4.2. Menu Screen Construction and Initialization ......................................... 22
4.4.3. Menu Setup ........................................................................................... 23
4.4.3.1. FRIENDS MMSI LIST .................................................................. 23
4.4.3.2. GROUP MMSI LIST ..................................................................... 23
4.4.3.3. TELEPHONE LIST....................................................................... 24
4.4.3.4. LCD BACKLIGHT......................................................................... 24
4.4.3.5. LCD CONTRAST ......................................................................... 24
4.4.3.6. GPS FUNCTION SET .................................................................. 24
4.4.3.7. MANUAL GPS/TIME .................................................................... 25
4.4.3.8. DSC SET...................................................................................... 25
4.4.3.9. RADIO SET.................................................................................. 26
4.4.3.10. REAL TIME CLOCK(Current time change)................................ 26
4.4.3.11. FACTORY RESET(MENU SETUP INITIALIZATION)................ 26
4.4.3.12. SYSTEM TEST(System Test).................................................... 26
4.4.3.13. PRINT SETUP(Print Setup) ....................................................... 27
4.5. DIGITAL SELECTIVE CALLING (DSC) .......................................................... 27
4.5.1. Configuration of CALL Screen ............................................................... 29
4.5.2. CALL Menu Description and Instruction ................................................ 29
4.5.2.1. DISTRESS CALL(Distress message SETUP and Call) ............... 30
4.5.2.2. ALL SHIPS MESSAGE SETUP AND CALL................................. 32
4.5.2.3. INDIVIDUAL MESSAGE SETUP AND CALL............................... 33
4.5.2.4. AUTO/SEMI-AUTO Message Edit and Call ................................. 35
4.5.2.5. TEST CALL .................................................................................. 35
4.5.2.6. GROUP MESSSAGE EDIT AND CALL ....................................... 36
4.5.2.7. POSITION MESSAGE EDIT AND CALL ..................................... 37
4.5.2.8. DISTRESS CALL RELAY ............................................................ 38
4.5.2.9. DISTRESS RELAY ACKNOWLEDGEMENT............................... 40
4.5.2.10. RESPONSE to DISTRES CALL................................................. 40
4.5.2.11. RESPONSE to THE OTHER CALL ........................................... 41
4.5.2.12. DIRECT RELAY ......................................................................... 42
4.5.2.13. RECVEIVING DISTRESS READ ............................................... 45
4.5.2.14. OTHER RECEIVING MESSAGE READ .................................... 45
4.5.2.15. DSC Message Receiving ........................................................... 46
4.5.2.16. Auto Acknowledgement Setup ................................................... 46
Chapter 5. Installation .................................................................................... 48
5.1. Unpacking Package and Inspection................................................................ 48
5.2. Selection of Installation Position for Main Units of STR-6000A ...................... 48
5.3. Installation for main unit of STR-6000A .......................................................... 48
5.4. Cabling ............................................................................................................ 50
5.4.1. Power Connection ................................................................................. 51
5.4.2. Connects to External Speaker............................................................... 51
5.4.3. How to setup Antenna ........................................................................... 51
5.4.4. GPS Connection.................................................................................... 51
5.5. Integrated Wiring............................................................................................. 51
Chapter 6. Channel List ................................................................................. 53
6.1. ITU Channel .................................................................................................... 53
6.2. USA Channel .................................................................................................. 55
6.3. CANADA Channel........................................................................................... 57
6.4. Weather Channel ............................................................................................ 59
Chapter 7. Position Information Interface .................................................... 60
Chapter 8. Packing List.................................................................................. 61
8.1. Oversea........................................................................................................... 61
8.2. Domestic ......................................................................................................... 63
Chapter 9. Block Diagram.............................................................................. 65
Chapter 10. Overall Drawing.......................................................................... 66
Chapter 1. Introduction
1.1. Introduction
STR-6000A includes DSC/VHF radio telephone and DSC receiver required by the Global
Maritime Distress and Safety System(GMDSS) and is designed to be compact and lightweight
for easy installation in any vessels engaged in international voyages and near-going vessels.
In addition to the conventional voice communication, STR-6000A is equipped with Digital
Selective Calling(DSC) functions for distress calls and routine calls as well. It also incorporates
all the necessary units for DSC services such as DSC unit, CH70 DSC receiver.
1.2. Features
—
The equipment meets the ITU Radio Regulations, IMO Performance Standards and
CCIR Recommendations.
—
The equipment contains all the channels designated by Radio Communication
Regulations of ITU Communications Treaty and it is also available to operate USA
channel, Weather channel and Canada channels that are used in the coast of North
America. (Weather alarm function. Available in the area of USA and Canada).
—
As the compact size includes the built-in transceiver, the dedicated CH70 DSC
receiver, it is easy for installation in any little space.
—
The adoption of wide sight graphic LCD allows user to see the display at every angle
and operate it with ease.
—
As the required operation mode is displayed in LCD according to the indication and
the purpose by MENU mode, it is easy to work on operating DSC in particular as well
as on the routine operation.
—
If the dedicated DPU-414 printer or normal SERIAL standard printer is used in
combination with the main unit, the messages of DSC transceiver is designed to be
automatically printed out. It is always available to manually print the received
message that is memorized inside, too.
—
As the lighting range of back-light in LCD and the operation key panels is wide, it
does not interfere any night shift.
—
Beside those channels designated by Radio Communications Regulations, it is
available to operate USA Channel, Weather Channel and Canada Channel which are
used in the coast of North America.
—
Such functions as TAG CHANNEL SCANNING, ALL CHANNEL SCANNING,
GROUP-CHANNEL SCANNING and DUAL WATCH allow user to listen to any
specific channel.
—
Besides the existing voice communications, it is available to work on communications
for distress, urgency, safety and other routines as well by using DSC function.
In case that the coast station is working on automatic connection service of public
communications network, it is available to auto-connect the general telephone
through the designation of the telephone number on the equipment.
—
The equipment has a function of automatically inputting the latitude/longitude data
coming out from navigational equipment such as GPS navigator. In transmitting
Distress Call, it is designed to automatically transmit the positional data coming out
from navigational equipment by inserting the positional data in the distress message.
In case of receiving any call from the coast area, it is designed to make an automatic
judgment by itself to see if the own ship is within the called area according to the
positional data coming out from the navigational equipment.
—
The equipment is designed for the daily waterproof.
—
User can select and automatically set up the transmission power of High(25W) or
Low(1W).
—
It is easy to use the dedicated CH16/19 buttons with which the access to the priority
channel can be easily made.
—
It includes the functions of Dual/Trial Watch and Tag Scan.
—
The DSC(Digital Selective Calling) function is compliant with Class A Standards.
—
‘FRIENDS list’ function allows user to easily call through DSC up to 20 favorite people.
—
It is available to set up 3 favorite groups.(For the purpose of Group DSC calling).
—
Both Group DSC calling and All Ship DSC calling available.
—
User can identify the position of friends through LL Position Polling.
Chapter 2. Configuration
The equipment consists of as follows;.
2.1. Standards
Name
Model
Quantity
Remarks
VHF Radio Main Unit
STR-6000A
1 Set
Including HAND MIC
Operating Manual
1 Lot
2.2. Option
Name
Model
Remarks
SAN-150 (RX/TX) 3dBi
Including
CABLE/BRACKET
Domestic : Standard
Overseas : Option
Antenna (3dBi)
SAN-150 (DSC WKR) 3dBi
SP-580AD
AC/DC POWER
SUPPLY
SP-6000AD
VHF EMG LIGHT
DSC/VHF PRINTER
DC24V / 3W
DPU-414
Including CABLE
Domestic : Standard
Overseas : Option
Stand Type
Including CABLE
Chapter 3. Specifications
3.1. STR-6000A Standards
TX Frequency
RX Frequency
Number of Channels
Radio Wave Mode
Channel Interval
Communication Mode
Antenna impedance
Audio Output Impedance
Frequency Stability
Voltage Supply
Consumption Currency (13.6V)
Operating Temperature
Dimensions
Weight
156.025MHz ~ 157.425MHz
156.050MHz ~ 163.275MHz
183
ITU Channel: 55
USA Channel: 57
CANADA Channel: 61
WEATHER Channel: 10
FM(16K0G3E), DSC(16K0G2B)
25kHz
Simplex and Semi-Duplex
50Ω(SO-239)
4Ω
±10 PPM(-20℃ to +60℃)
13.6V DC±10%(Negative Ground)
TX High
5.5A max
Maximum Audio
1.5A max
-15℃ ~ +55℃
85×172×170
1.1kg
3.2. Transmitting Unit
Output Power (ⓐ 13.8 V DC)
25W/1W(Low)
Frequency Deviation
Within ±5ppm
Oscillation Mode
Modulation
Maximum Frequency Deviation
Occupied Bandwidth
MIC Input Impedance
Audio Frequency Response
Spurious Emissions
Adjacent Channel Power
Audio Harmonic Distortion
Residual Modulation
(Signal/Noise Ratio)
Type of emition
Synthesizer Mode
Variable Reactance Frequency Modulation
±5.0kHz
Within 16kHz
2kΩ
300Hz~3kHz 6dB/octave(+1 ~ -3dB)
Less than 70dB
Less than -70dBc
Less than 10%
Over 40dB
G2B
3.3. Receiving Unit
Receive System
Intermediate Frequencies
Audio Frequency Response
Double Conversation Super Heterodyne
1st 21.7MHz
2nd 450kHz
Receiving Frequency - 21.7MHz
SYNTHESIZER Mode
32uV (20dB SINAD)
0.22uV (12dB SINAD)
-6dB/octave
Squelch Sensitivity
Co-Channel Rejection
Adjacent Channel Selectivity
Spurious Response Rejection Ratio
Inter-modulation Rejection Ratio
Spurious Emission
Hum and Noise
Audio Output Power (at 13.6 V DC)
0.22uV
-10dB ~ 0dB
Over 70dB
Over 70dB
Over 68dB
Less than 2nW(-56.9dBm)
Less than -40dB
4.5W / 4Ω(Distortion Rate: Less 10%)
Local Oscillation Frequency
Local Oscillation Mode
Sensitivity
3.4. Dedicated Receiving Unit
Operating Frequency
Mode
Receive System
Intermediate Frequencies
Inter-modulation Rejection Ratio
Adjacent Channel Selectivity
156.525MHz
16K0G2B
Double-Conversion Super Heterodyne
1st 10.70 MHz
2nd 450 kHz
Over 68dB
Over 70dB
Spurious Response Rejection Ratio
Over 70dB
Spurious Emission
DSC Modulation Speed
DSC Modulation Mode
DSC Modulation Rate
MARK Frequency
SPACE Frequency
Maximum Sensitivity Available
DSC Operation
Less than 2nW(-56.9dBm)
1200baud (±30ppm)
FSK
Within m=2±10%
Within 1300Hz±10Hz
Within 2100Hz±10Hz
Bit Error Rate: Less than 10-2 in 0.25uv
ITU-R M.541-9
ITU-R M.689-2
ITU-R M.493-11 class-A
DSC Protocol
DSC FILE Memory
DISTRESS-Related Message Reception: 20
OTHERS-Related Message Reception : 20
10
Chapter 4. How to Operation
4.1. Unit Description
4.1.1. Front Panel
① LCD Front Display Screen.
Transmit distress call (Alert) MESSAGE.
②
(※ You MUST NOT make a test of the transmission !! )
Push and hold down for 3 seconds, then the distress call will
be activated.
③
Light will turn on in both receiving and transmitting DSC
distress call
④
Light will turn on in both receiving other DSC call message
other than distress call.
This is for either changing the existing channels to CH16 or
⑤
returning to TELEPHONE MODE from other CH or DSC
MENU.
⑥
Select channel 70
To convert CH or MENU.
⑦
(If press short one time, if press long time it is to be
continuous).
11
Short time press is for DSC Calling and long time press is for
⑧
MENU function.
⑨
This is ‘ESCAPE’ function in MENU mode.
⑩
It means this is being used as FUNCTION button.
⑪
PWR/VOL (Power Knob)
⑫
SQUELCH Knob
Power ON/OFF and Volume Control.
Squelch Control
⑬ Button description
Input “1” when selects CH and inputs digit.
1 DUAL
QZ
When used this button, it works ON/OFF for dual watch
function. (It receives the message by switching over between the
existing CH and CH16 each other continuously.)
When inputs character, convert from 1→ space → Q →to Z in order
and ENT.
2 TRI
When selects CH and inputs digit, input “2”.
ABC
When used this button, it works ON/OFF for triple watch
function. (It receives the message by switching over among the
existing CH, CH16 and CH09 each other continuously.)
When inputs character, convert from 2→ A → B →to C in order and
then ENT.
3 DIM
DEF
When selects CH and inputs digit, input
“3”.
When used this button, it adjusts BACK-LIGHT(Internal Light)
in 4 steps.
When inputs character, convert from 3 → D → E → F in order and
ENT.
12
4 SCN
When selects CH and inputs digit, input
“4”.
GHI
When used this button, it does scanning all channels with
converting “ALL” in screen (“CLR” when it finished)
When inputs character, convert from 4 → G → H → I in order and ENT
5 TSCN
When selects CH and inputs digit, input
“5”.
JKL
When used this button, it does scanning only selected CH by
TAG with converting “ALL” to “TAG” in screen
When inputs character, convert from 5 → J → K → to L in order and
ENT
6 TAG
When selects CH and inputs digit, input
“6”.
When used this button, it can set up TAG at selected CH.
When inputs character, convert from 6 → M → N → to O in order and
ENT
7 ITU
When selects CH and inputs digit, input
“7”.
PRS
When used this button, it can set up to ITU MODE..
When inputs character, convert from 7 → P → R → to S in order and
then ENT
8 USA
When selects CH and inputs digit, input
“8”.
TUV
When used this button, it can set up to USA MODE.
When inputs character, convert from 8 → T → U → to V in order and
then ENT
9 CAN
WXY
When selects CH and inputs digit, input
“9”.
When used this button, it can set up CAN MODE.
When inputs character, convert from 9 → W → X →to Y in order and
ENT.
13
0 TEST
When selects CH and inputs digit, input “0”.
*-/
When used this button, it can execute self-test menu.
When inputs character, convert from 0 → * → _ → / in order and then
ENT.
When used this button, TAG is moving on the selected CH.
TGO
WX/CE
On the main screen, it can select weather CH, move a cursor to
forward for character input.
H/L
ENT
It is a function to switch-over Tx power between 25W and 1W each
other.
In DSC MENU, it can be used for Item selection and Input
confirmation.
4.1.2. Microphone
① PTT : If pressed, it goes to transmission.
② MIC : Condenser Mic
14
③ Key Pad :
: To convert to the current CH and CH16.
: It is used as Enter button for setting-up input data in MENU mode, while
at normal times it is used for switching-over Tx power between 25W and 1W.
: To convert CH.
(If pressed short it is to be one time, if pressed long time it is to be continuous).
④ Hook Switch
If a Handmic is connected with Handmic Box a current CH ignored and go to common
CH(CH16) automatically.
Handmic
Handmic Box
15
4.2. LCD Screen Description
Item
DISTRESS
BUSY
25W(01W)
ALL
DUL
35.05.1250N
129.04.2741E
12:15PM
WXALT
ITU(USA,CAN,
WEA)
SIM(DUP)
TAG
RX(TX)
16
Function Description
CH Name
It represents detecting the sensitivity signal in existing CH..
It represents Tx Power.
It represents the kinds of SCAN.
It plays multi-scan between the existing CH and CH16. (It will be
converted when scanning.)
It indicates own ship’s latitude.
(As the current position, it indicates GPS antenna position)
It indicates own ship’s longitude.
(As the current position, it indicates GPS antenna position)
It represents the current time.
It is displayed when weather channel is set-up.
It represents the country channel mode currently set-up.
It represents whether current CH is Duplex or Simplex.
It represents TAG which is setting-up at the current CH
It shows Rx when receiving, and Tx when transmitting.
It represents the current CH is Channel No.16.
16
4.3. VHF Operation
4.3.1. Channel Selection
4.3.1.1. Channel 16
CH.16 is for distress and safety, and it should be monitored through dual-watch and
tri-watch.
Whenever selected
current CH.
key, it shifted from the current CH → CH 16 → CH 9 →
4.3.1.2. Channel Mode Selection (ITU,USA,CAN)
— How to select ITU CH
Press
button and go to
— How to select USA CH : Press
button and go to
— How to select CANADA CH : Press
—
17
button and go to
button.
button.
button.
4.3.2. Weather Channel
— It can receive 10 numbers of weather channel provided by NOAA (National
Oceanographic and Atmospheric Administration).
— STR-6000A can detect the alert sound of selected weather channel from the
regular channel or the one during the channel scanning
— When selected
it converts between weather channel and general
channel.
—
4.3.3 Transmit and Receive
① Power and Volume switch
— It is operated by POWER ON switch and used for adjusting Sound volume.
— If turned OFF-wise, power will be off.
— It turned clock-wise, power will be on and volume can be adjusted.
② Squelch Knob
— Place it in suitable position to eliminate the noise by SQUELCH volume.
③ After pressing
USA :
button
, CANADA :
and select the wanted channel (ITU :
) and press.
④ Channel can be changed one by one by direction key in Main unit and Mic and
Channel will keep on changing if pressed long time. In addition, if inputs digit key,
channel can be changed.
⑤ Tx power can be selectable between 25W and 1W
⑥ Tx is possible if pressed PTT switch, while the status is Rx if it is released.
18
(STR-6000A Main Body)
(STR-6000A Microphone)
19
4.4. Menu Setup and Construction
4.4.1. Menu Construction
1. FRIENDS MMSI LIST
2. GROUP MMSI LIST
3. TELEPHONE LIST
4. LCD BACKLIGHT
5. LCD CONTRAST
6. GPS FUNCTION SET
GPS TIME OFFSET
TIME DISPLAY FORMAT
TIME DISPLAY ON/OFF
LL DISPLAY ON/OFF
GPS ALERT ON/OFF
7. MANUAL GPS/TIME
8. DSC SET
USER MMSI
INDIVIDUAL REPLAY
LAT/LONG REPLY
DSC FUNCTION DISABLE
MEDI/SHIP AIRCRAFT
Menu Select
Press MENU
button long time
-- MENU ITEM SELECT--
9. RADIO SET
CHANNEL NAME
CHANNEL ON/OFF
WEATHER ALERT
BEEP VOLUME
VDR ON/OFF
USE CH9
10. REAL TIME CLOCK
11. FACTORY RESET
12. SYSTEM TEST
13. PRINT SETUP
20
PROGRAM VERSION
DISTRESS KEY
PLL TEST
DISPLAY DEVIATION
SOUND TEST
SUB CPU VERSION
DSC AUTO PRINT
SELF PRINT TEST
Menu Select
1. DISTRESS CALL
2. ALL SHIP CALL
3. INDIVIDUAL CALL
4. AUTO/SEMI CALL
5. TEST CALL
6. GROUP CALL
7. POSITION POLL
8. DISTRESS RELAY
9. DISTRESS RLY ACK
10. DISTRESS ACK
11. OTHERS ACK
12. DIRECT RELAY
13. RCV DISTRESS READ
14. RCV OTHERS READ
Press MENU
button shortly
-- CALL ITEM SELECT--
21
4.4.2. Menu Screen Construction and Initialization
— Press
1. FRIENDS MMSI LIST
2. GROUP MMSI LIST
3. TELEPHONE LIST
4. LCD BACKLIGHT
5. LCD CONTRAST
button over one (1) second to get into the various Menu.
ADD NEW FRIEND
ADD NEW GROUP
ADD NEW TELEPHONE
LOW ~ HIGH(4 Steps/2)
LOW ~ HIGH (16 Steps/10)
TIME OFFSET
Friend ID register
Group ID register
Call ID register
BACKLIGHT Control
CONTRAST Control
- 00:00
TIME DISPLAY FORMAT – 12H/24H
6. GPS FUNCTION SET
7. MANUAL GPS/TIME
TIME DISPLAY ON/OFF
LL DISPLAY ON/OFF
- ON/OFF
GPS ALERT ON/OFF
- ON/OFF
9. RADIO SET
Time Display
12HOURS/24HOURS
Time Display ON/OFF
Position Display
ON/OFF
GPS Alarm
LAT/LONG MANUAL SET
Position manual input
USER MMSI – INPUT USER MMSI
Own ship ID input
Automatic
response
set-up
Position response setup
DSC ON/OFF Set-up
INDIVIDUAL REPLY - AUTO/MANUAL
8. DSC SET
Time difference set-up
LAT/LONG REPLY
- MANUAL/AUTO/OFF
DSC FUNCTION DISABLE -YES/NO
MEDI/SHIP_AIRCRAFT
CHANNEL NAME
CH name change
CHANNEL ON/OFF
CH ON/OFF
WEATHRE ALERT
BEEP VOLUME
- ON/OFF
- HIGH/LOW/OFF
Weather CH Alarm
Alarm Volume
VDR ON/OFF
VDR ON/OFF
USE CH9
CH9 ON/OFF
10. REAL TIME CLOCK
YEAR, MONTH, DATE, HOUR, MINUTE,
SECOND
Current time change.
11. FACTORY RESET
RESET
12. SYSTEM TEST
13. PRINT SETUP
PROGRAM VERSION
Menu set-up
Initialization
Program version
DISTRESS KEY
Test distress key
PLL TEST
Test PLL in Rx
DISPLAY DEVIATION
Test LCD
SOUND TEST
BELL/URGENCY/ERROR/WARNING
Test sound
SUB CPU VERSION
SUB CPU Version
DSC AUTO PRINT – ON/OFF
DSC Automatically
Printing Setup
SELF PRINT TEST – YES/NO
Printer Test
- YES/NO
22
4.4.3. Menu Setup
— Press
button at greater length.
— Overall construction of MENU Screen is as follows.
— Item Selection : From above screen, shift the cursor by using
button and press
button to select the current item.
4.4.3.1. FRIENDS MMSI LIST
— It can add/edit/delete the preferred friend’s name and associated MMSI up to
20 numbers. (It can save maximum 20 numbers)
¾
To add name to FRIENDS LIST
¾
To edit FRIENDS
¾
To delete FRIENDS
4.4.3.2. GROUP MMSI LIST
— It can add/edit/delete the preferred Group’s name and associated MMSI up to
3 numbers. (It can save maximum 3 numbers)
¾
To add name to GROUP LIST
¾
To edit GROUP
¾
To delete GROUP
23
4.4.3.3. TELEPHONE LIST
— It can add/edit/delete the preferred Telephone name and associated MMSI up
to 10 numbers. (It can save maximum 10 numbers)
¾
To add name to TELEPHONE
¾
To edit TELEPHONE
¾
To delete TELEPHONE
4.4.3.4. LCD BACKLIGHT
— Set-up backlight level to adjust the brightness of LCD and Key Pad.
4.4.3.5. LCD CONTRAST
— It is used for setting-up suitable contrast of LCD.
4.4.3.6. GPS FUNCTION SET
— If there is a GPS receiver on board, VHF radio can be updated with own
ship’s position and time. But if there is not GPS receiver available or not being
connected with it, own ship’s position and time can be input by means of GPS
SETUP menu manually. This is very important information for using DSC
distress call.
— TIME OFFSET : Local time can be used for inputting time difference between
UTC and Local time.
— TIME DISPLAY FORMAT (The kind of Time display) : Time can be displayed
in the type of 12 hour or 24 hour.
— DISPLAY ON/OFF(Time Display Option) : If time is input manually, “M” can
be displayed in the right of time . But if ship’s position is updated through GPS
receiver, time display on screen can be turned ON/OFF.
— DISPLAY ON/OFF(Position Display Option) : If ship’s position is input
manually, “M” can be displayed in the right of Lan./Lon. But if the position is
updated through GPS receiver, ship’s position can be turned ON/OFF.
— GPS ALERT ON/OFF(GPS Alarm) : GPS is normally set in “ON” status, but if
there happened to disconnect with GPS receiver, alarm will be occurred.
24
4.4.3.7. MANUAL GPS/TIME
— LAT/LONG MANUAL SET(Input position manually) : Ship’s position and
longitude is displayed on screen together with time. To display “MANUAL
SETUP”, value of latitude, longitude and time will be displayed in reverse
status. This display mode will be cancelled as soon as GPS receiver is
connected and come to display normal mode.
Warning : This function is only available when GPS receiver is disconnected.
— TIME MANUAL SET(Input time manually):
Warning : This function is only available when GPS receiver is disconnected.
4.4.3.8. DSC SET
— USER MMSI(Input own ship’s MMSI or Confirm MMSI)
¾
This mode can be executed only once. Be sure to input own ship’s MMSI
ID before using DSC function. MMSI ID once set can be read out
whenever it is wanted.
¾
By inputting USER MMSID once more, MMSI ID can be stored
permanently.
¾
Whenever it may be, stored MMSI ID can be seen through this MENU.
— INDIVIDUAL REPLY(Automatic relay of individual call and manual setup)
— SET(Group
MMSI
setup
and
edit)
Use
GROUP
SETUP
to
produce/edit/delete GROUP of who are called quite often. GROUP MMSI ID
always begins with “0”.
¾
Setup GROUP
¾
Edit GROUP Name
¾
Delete GROUP NAME
— LAT/LONG REPLY(Setup automatic response on request LL Polling) : 3
Items can be selectable in response to request of LL Polling.
¾
AUTO : Automatic response to any LL Polling coming from FRIENDS.
¾
MANUAL : Manual decision is to be made whether it is necessary to
response to the request of LL Polling from FRIENDS.
¾
OFF : Ignore all LL Polling coming from Friends.
25
— DSC FUNCTION DISABLE
¾
Set Up DSC function use.
— MEDI/SHIP_AIRCRAFT
¾
ON/OFF MEDIcal Transponder & SHIP and AIRCRAFT use.
4.4.3.9. RADIO SET
— CHANNEL NAME (CH NAME)
¾
Channel name modification and deletion.
— CHANNEL ON/OFF(CH ON/OFF)
¾
It is used for either permitting or stopping the use of current CH.
— WEATHER ALERT(Weather Alarm Setup)
¾
NOAA provides with a variety weather information regarding USA or CAN
channel. NOAA Broadcasts 1050 Hz band weather alert if it forecasts
heavy storm or Hurricane. Setup this function to detect weather alert.
— BEEP VOLUME(Adjust Beep Volume)
¾
It has a function either to change level of beef volume or to make it be
OFF.
— VDR(Voyage Data Recorder) ON/OFF
¾
Display VDR function use or not.
— USE CH9
¾
Display CH9 use or not.
4.4.3.10. REAL TIME CLOCK(Current time change)
— YEAR, MONTH, DATE, HOUR, MINUTE, SECOND
4.4.3.11. FACTORY RESET(MENU SETUP INITIALIZATION)
— RESET : Except all MMS ID and FRIEND LIST SETTING UP, all setup value
should be returned to initialization.
4.4.3.12. SYSTEM TEST(System Test)
— System test can be executed in this MENU.
¾
PROGRAM VERSION : (Test program version and date)
¾
DISTRESS KEY : (Test DISTRESS button) : Press DISTRESS button for
26
3 seconds in order to check button condition.
¾
PLL TEST (Test PLL condition on Tx and Rx) : It will be tested from
minimum frequency to the maximum by 25KHz step.
¾
DISPLAY DEVIATION : LCD test (Display the character).
¾
SOUND TEST : Test on Bell, Emergency, Error and Alarm.
¾
SUB CPU Version : SUB CPU version check.
4.4.3.13. PRINT SETUP(Print Setup)
— This menu is ready to set-up Printer.
¾
Set-up auto printer ON/OFF function when receiving DSC.
¾
SELF TEST ON/OFF
4.5. DIGITAL SELECTIVE CALLING (DSC)
— Cautions in operating KEY
As the test of this function may cause huge damages to near-going vessels
and search & rescue authorities, therefore, the test MUST NOT be made at
all times. Once the call is operated, an alarm will come out from the speaker
and the message will be transmitted if the hand is off from the switch for 5
through 10 seconds. It is possible to stop the mistaken launch if the hand is
off from the [DISTRESS] KEY within 5 seconds but it is not possible to stop if
any stop work is performed in the middle of the transmission as the signal
speed is so fast. In particular, much attention should be paid because the
whole message may be transmitted.
— How to transmit Distress Call
Press
button for 3 seconds to transmit Distress Call message. The
Distress Call prioritizes all other performances and the alarm is output from
the speaker. And then non-modulated carrier will be followed after
transmission and the distress message will be automatically transmitted. The
message will be transmitted 5 times and then the transmission will be
repeated at the intervals of 3 minutes 30 seconds through 4 minutes 30
27
seconds until the reception is confirmed. In case that it is interfaced with any
navigational equipment, the data on time and position will be automatically
input. It is available to manually input the time when the position data and
position are decided.
If the transmission is made when it is not connected with any navigational
equipment or under the conditions where any single manual input has not
been made, it will transmit zero information. (But it transmits the ship ID)
— How to receive Distress Call
If Distress Call is received on DSC, the alarm lamp of DISTRESS & OTHERS
on the operation panel will be turned on. At the same time, an alarm of “Beep,
Beep” will be output from the speaker. Press
button to stop this alarm.
The distress call message from the transmitting country is included and
displayed on LCD.
As the equipment can record and store up to 20 memories inside, the
message can be checked out again even later.
And by connecting to printer, it is available to automatically output the
message received by DSC through printer. It is also possible to print the
notified message contents that are stored in the memory.
28
4.5.1. Configuration of CALL Screen
— Press
button in short.
— The whole display configuration of DSC CALL MENU is as follows;
— Item selection : Use
the wanted item and press
buttons in the above Screen and move to
button.
4.5.2. CALL Menu Description and Instruction
1. DISTRESS CALL
2. ALL SHIP CALL
3. INDIVIDUAL CALL
4. AUTO/SEMI CALL
5. TEST CALL
6. GROUP CALL
7. POSITION POLL
8. DISTRES RELAY
9. DISTRES RLY ACK
10. DISTRES ACK
11. OTHERS ACK
12. DIRECT RELAY
13. RCV DISTRESS READ
14. RCV OTHERS READ
Edit distress alarm message and transmit
Edit call message to all ships and transmit
Edit call message to individual ship and transmit
Edit call message/call number for Auto/Semi auto phone
connection and transmit
Test call
Edit call message to Group ships and transmit
Edit call message to the ship by the coordinates and transmit
Transmit to the Distress Call message received
Transmit response to distress relay ack message received
Transmit response to distress ack message received
Response to other ack (expect distress message)
Relay, edit and transmit to the Distress Call messages received
Inquiry to distress ack message received and print out
Inquiry to other receiving message and print out
29
4.5.2.1. DISTRESS CALL(Distress message SETUP and Call)
— On screen of CALL ITEM SELECT, select 1.DISTRESS CALL by using
buttons and then press
button.
— In order to select types of distress (Nature of Distress), select
> NATURE : UNDEFINE list and then
press
button. It shows relative
menu of types of distress such as following box on a small screen. Select a
wanted distress list by using
buttons in this screen.
— Calamity
¾
UNDEFINED – Undefined calamity
¾
FIRE – Explosion
¾
FLOODING – Flood
¾
COOLLISION – Collision
¾
GROUNDING – Grounding
¾
LISTING – Capsize
¾
SINKING – Sinking
¾
ADRIFT – Impossible to sail and go adrift
¾
ABANDON – Vessel abandonment
¾
PIRACH – Piracy
¾
OVERBOARD- Man over Board
30
— In order to input distress position (POSITION), select
using
buttons and then press
>LAT / > LONG list by
button. It makes cursor
blink and then input wanted longitude/latitude on the blinking cursor.
— After select TIME-UTC
buttons and then press
button.
It makes cursor blink. After input UTC time on the blinking list and press
button.
Press
button for 3 seconds to send out distress message. Non-
modulated carrier will be followed after transmission and the distress
message will be automatically transmitted. The message will be transmitted 1
time and then the transmission will be repeated at the intervals of 3 minutes
30 seconds through 4 minutes 30 seconds until the reception is confirmed.
31
4.5.2.2. ALL SHIPS MESSAGE SETUP AND CALL
— Select 2.ALL SHIP CALL list on CALL ITEM SELECT screen by using
buttons and then press
—
button.
‘CATEGORY' list is a function for selecting SAFETY or URGENCY, either and
press
button after move the cursor to > CATEGORY list by using
buttons. Then, select one of SAFETY or URGENCY on the
following small screen and the small screen is disappeared when press
button after selecting a wanted list by using
buttons.
— 'WORK CH' is input Tx/Rx CH according to the related regulation. Press
button after move the cursor to > WORK CH list by using
buttons. It shows following screens and make cursor blink. The
screen is going back to > WORK CH after input a wanted channel. However,
don’t set up CH70, CH75, CH76, which are exclusively used.
32
— After going through the edition of MESSAGE, select > TRANSMIT DSC list
and transmit by suing
buttons.
4.5.2.3. INDIVIDUAL MESSAGE SETUP AND CALL
— Press
button after select 3. INDIVIDUAL CALL list on CALL ITEM
SELECT screen by using
—
Press
buttons. It makes following screens.
button after select > ADDRESS list by using
buttons. It shows following screens and then press
Then, input ADDRESS(MMSI) on the list cursor is blinking.
33
button, again.
—
By using
button, select and press > CATEGORY
button then following small screen shown up. Here on the item where the
cursor is flickering, by using
—
By using
button and press
button, select
> TELECMD1 and press
button then following small screen comes up and again press
— By using
button.
button, select
button.
> TRANSMIT DSC and press
button then following small screen comes up from which you may
choose YES if you want or NO by using
button to send out message one time.
34
button and press
4.5.2.4. AUTO/SEMI-AUTO Message Edit and Call
— This function as an option will be further realized soon.
4.5.2.5. TEST CALL
— This function is used for testing call, following procedure in editing and calling
for position messages shall be done.
— On CALL ITEM SELECT screen, by using
button.
5. TEST CALL item and press
—
By using
button, select
button, select
> ADDRESS and press
then following small screen comes up. Again press
button,
button. Then input
ADDRESS(MMSI) at the item on which the cursor is currently flickering.
— After finishing the edition of MESSAGE, press
DSC then MESSAGE will be transmitted one time.
35
key at > TRANSMIT
4.5.2.6. GROUP MESSSAGE EDIT AND CALL
— On CALL ITEM SELECT screen, select the item 6. GROUP CALL by using
button, and press
button.
— This item 'GROUP ID' ready to input the opponent’s ID. From this item, press
button then following small screen comes up, press
button then
cursor is flickering to be ready for inputting the wanted information.
— In this 'WORK CH', input the wanted CH for transceiving according to the
applicable standard. Input method is to use
button and select
button then following screen comes up
> WORK CH item and press
and cursor is flickering. After inputting the wanted CH, screen will return to >
WORK CH.
Note : Currently using CH such as CH70, CH75, CH76 shall not be set-up.
36
— After finishing message edit, select
> TRANSMIT DSC item by using
button and send out the message.
4.5.2.7. POSITION MESSAGE EDIT AND CALL
— On CALL ITEM SELECT screen, select item 7. POSITION CALL by using
button and press
—
button.
Select > ADDRESS using
button and press
following small screen comes up, then again press
ADDRESS(MMSI) on the item where the cursor is flickering.
37
button then
button. Input
— After finishing the message edit, select the item > TRANSMIT DSC by using
button and send-out message.
4.5.2.8. DISTRESS CALL RELAY
— Select item8. DISTRESS RELAY on CALL ITEM SELECT screen by using
button and press
button.
— After select > FORMAT using
button
and press
button then following small screen comes up. From this screen, select the
appropriate item (ALL SHIP or INDIVIDUAL) using
press
button.
38
button and
— Select > ADDRESS(MMSI)
using
button and press
button then following screen comes up. From this screen, select the
appropriate item by using
button and press
— Select > TRANSMIT DSC by using
button.
button and press
button then following screen comes up. From this screen, select YES or NO
for sending Message by using
button and press
— After finishing Message edit, press
button.
button at TRANSMIT DSC to send
out message one time
— Unless there have received any distress messages, this item won’t not be
selected.
39
4.5.2.9. DISTRESS RELAY ACKNOWLEDGEMENT
— On “CALL ITEM SELECT” screen, select 9. DISTRESS RLY ACK by using
button and press
button.
— It is impossible to edit Message but only possible to response at
>TRANSMIT DSC after editing using
button.
— Acknowledgement to DISTRESS in Individual Call is only one time available
within 5 minutes.
4.5.2.10. RESPONSE to DISTRES CALL
— On “CALL ITEM SELECT” Screen, select 10. DISTRESS ACK by using
button.
button and press
— Select >TRANSMIT DSC using
button and press
button
then small screen comes up and select YES or NO for sending message and
press
button.
40
4.5.2.11. RESPONSE to THE OTHER CALL
— On “CALL ITEM SELECT” screen, Select 11. OTHERS ACK using
button and press
— Select > CATEGORY
button.
from the screen by using
button and
press
button to come up small screen where to select the item and
press
button.
— Select > TELECMD1
from screen using
button and press
button then small screen comes up where to select the item and press
button.
41
— Select > WORK/LAT/LONG/TIME-UTC from screen respectively by using
button and input the information.
— After finishing all information, select > TRANSMIT DSC at the following
screen by using
button and press
YES or NO for sending Message and press
button to decide
button.
4.5.2.12. DIRECT RELAY
— On “CALL ITEM SELECT” screen, Select 12. DIRECT RELAY using
button and press
button.
— Select > FORMAT from screen using
button and press
button. Afterwards make a decision whether to relay to all ships or individual
in small screen and press
button.
42
— Select > ADDRESS from screen using
button and press
button. Afterwards select the methods of input for ADDRESS (MMSI)
small screen and press
from
button.
— Select > DIST-ID from screen by using
button and press
button. Afterwards select the methods of input for ADDRESS (MMSI)
from small screen and press
button. If it is unknown ADDRESS(MMSI)
of the distressed ship, input ????????.
— Select > NATURE from the screen using
button and press
button. Afterwards select the distress related item from small screen
and press
button.
43
— Select
LAT/LONG/DIST-UTC
button and press
respectively
from
screen
using
button and input appropriate
information.
— After finishing edit, select
and press
>TRANSMIT DSC using
button
button to decide YES or NO to send message and press
button.
44
4.5.2.13. RECVEIVING DISTRESS READ
— On “CALL ITEM SELECT” screen, select 13. RCV DISTRESS READ using
button and press
button. Then following message
related to receiving distress is seen..
— Display RCV DISTRESS READ screen as follows ;
RCV : 08 : means for 8 received messages.
1 DUAL
QZ
PRE : 1 : Display a message from 7 to 1 if press
button.
3 DIM
NEXT : 3 : Display a message from 1 to 8 of press
DEF
button.
4.5.2.14. OTHER RECEIVING MESSAGE READ
— On “CALL ITEM SELECT” screen, Select 14. RCV OTHERS READ by using
button and press
messages is seen as following screen.
45
button. Then other receiving
4.5.2.15. DSC Message Receiving
— Display a message which is just received with alarm.
— Stop a alarm if press
— Press
CLR
button and go back to main screen.
button over twice if received succession message are over two.
— Select > RCV DISTRESS READ or > RCV OTHERS READ for received
message search.
— Able to print out automatically printer connected with if a message received in
case of auto printer mode setup.
4.5.2.16. Auto Acknowledgement Setup
— If received DSC call, available for automatic acknowledgement with following
conditions. If work Channel specified, available to standby automatically
following communication mode.
— Auto Acknowledgement Conditions.
¾
Auto Acknowledgement should be ON(OFF when shipping).
¾
Should not be on editing a menu screen, DSC message.
¾
Received message format and category shouldn’t be distress contents.
¾
Received message’s TELECOMMAND contents shouldn’t be distress call
respond and distress relay.
¾
The specified communication mode of received message’s
TELECOMMAND must be right combined with the specified WORK
CHANNEL of WORK CH.
(Ex)It’s wrong combination with single mode and multi CHANNEL such as
the combination with TELECOMMAND : G3E SIMP TEL and WORK
CH : 25.
46
¾
END OF SEQUENCE
contents among the received message should be
ACK RQ.
¾
No received ERROR(ECC ERROR)
47
Chapter 5. Installation
5.1. Unpacking Package and Inspection
When dismantling the package, please treat with great care in checking the contents
with order specification. Please observe external surface whether it is damaged during
transportation and if there find damaged parts, then install after proper treatment
made.
In case of handling difficulty, please contact SAMYUNG ENC for proper treatment.
This machine can be installed without technical difficulties, but it needs to keep basic
installation guide lines described hereunder, which helps preserve optimum
performance as it is in the factory.
5.2. Selection of Installation Position for Main Units of STR-6000A
Installation position is selected according to following instruction.
1. Select the place where there is space enough to operate, repair and maintain with
efficient ventilation.
2. Select the place where there is not directly exposed to rain and sea water. Dry area is the
best place for installation electronic equipment.
3. Select the place where there is not directly exposed to sunray and avoid from
heating element.
4. Select the place where there is of little vibration.
5. Select the place where there is of little electrical interference.
5.3. Installation for main unit of STR-6000A
Main unit is to be installed referring to following drawing.
1. Fix the support plate by using screw to table, ceiling or wall. When pull the machine
into the wall, cut out the wall size 147 x 59 first and flush it into the wall.
2. Assemble the unit to the support using handle knob, and fix it at a convenient angle.
48
49
5.4. Cabling
Rear part of the unit has connectors, which can be efficiently interfaced with power,
antenna and other cables.
50
5.4.1. Power Connection
4 P connector located in the rear of the unit is used to supply power, of which Number
1 pin is ”+” and Number 2 pin is “-“ those can connect to Power supply [DC13.6V]
5.4.2. Connects to External Speaker
1P connector located in rear of the unit is a Speaker Connection Connector.
5.4.3. How to setup Antenna
FCC RF Radiation Exposure Statement:
The equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 90 centimeters between the radiator and your body.
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
1) STANDARD ANTENNA SET-UP
Most easy method for installation is to set up two or several antennas vertically
having distance more than 4 meters one another.
2) CAUTION WHILE SETTING UP ANTENNA
Please use supplier’s type of Tx Rx Antenna if possible, when you happened to use
other brand antenna, please use 50Ω with 150MHz band.
Please use high quality antenna/power-cable than standard ones.
Please set up at high location, if possible.
Please keep the antenna away from another transmit antenna.
For example, keep 4 meters away from other VHF antenna.
Please ensure that installation should be made where there avoids from mechanic
vibration and a rainstorm and connector parts must be waterproofed by using
waterproof tape.
While installed number of antenna simultaneously, cooper cables should be isolated
by using steel pipe, if not, anyway keep the distance 30cm each other.
5.4.4. GPS Connection
One Pin connector on the back of main unit is for external GPS information that is IEC
61162(NMEA0183) data connection connector.
5.5. Integrated Wiring
Please refer to installation drawing for interconnecting machines each other.
1. In the case DC wiring, please use cable with SAMYUNG supply or the one, which
can be endurable for specific electric current.
2. Please tighten connectors of Tx/Rx antenna and speaker to stand for ship’s rolling
and pitching.
51
can be endurable for specific electric current.
2. Please tighten connectors of Tx/Rx antenna and speaker to stand for ship’s rolling
and pitching.
52
Chapter 6. Channel List
6.1. ITU Channel
SHIP SHIP
TO
TO
SHIP SHORE
CH
Tx
(MHz)
Rx
(MHz)
01
02
03
04
156.050
156.100
156.150
156.200
160.650
160.700
160.750
160.800
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Port Operations, Duplex
NO
NO
NO
NO
YES
YES
YES
YES
05
156.250
160.850
Port Operations, Selected VTS Area
NO
YES
06
07
08
09
10
11
156.300
156.350
156.400
156.450
156.500
156.550
156.300
160.950
156.400
156.450
156.500
156.550
Inter-ship Safety
Port Operations, Duplex
Commercial(Inter-ship Only)
Recreational Calling Channel
Commercial
Commercial, VTS in Selected Area
YES
NO
YES
YES
YES
YES
NO
YES
NO
YES
YES
YES
12
156.600
156.600
Port Operations, Selected VTS Areas
YES
YES
13
156.650
156.650
Inter-ship Navigation Safety
(bridge-to-bridge)
YES
NO
14
156.700
156.700
Port Operations, Selected VTS Areas
YES
YES
15(1) 156.750
156.750
Port Operations - 1W Only
International Distress, Safety, and
Calling
State Controlled -1W Only
Port Operations, Duplex
Commercial, Duplex
Port Operations, Duplex
Port Operations, Duplex
Port Operations, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
YES
YES
PORT
OPS/VTS
PORT OPS
YES
YES
DISTRESS
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
SAR
PORT OPS
SHIP-SHORE
PORT OPS
PORT OPS
PORT OPS
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
16
156.800
156.800
17(1)
18
19
20
21
22
23
24
25
26
27
28
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
156.850
161.500
161.550
161.600
161.650
161.700
161.750
161.800
161.850
161.900
161.950
162.000
TRAFFIC TYPE
53
NAME TAG
TELEPHONE
TELEPHONE
TELEPHONE
PORT OPS
PORT
OPS/VTS
SAFETY
PORT_OPS
COMMERCIAL
CALLING
COMMERCIAL
VTS
PORT
OPS/VTS
BRIDGE COM
CH
Tx
(MHz)
Rx
(MHz)
60
61
62
63
64
65
66
67
68
69
156.025
156.075
156.125
156.175
156.225
156.275
156.325
156.375
156.425
156.475
160.625
160.675
160.725
160.775
160.825
160.875
160.925
156.375
156.425
156.475
70(2)
71
72
73
74
77
78
79
80
81
82
83
84
85
86
87
88
156.525
156.575
156.625
156.675
156.725
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
156.575
156.625
156.675
156.725
156.875
161.525
161.575
161.625
161.675
161.725
161.775
161.825
161.875
161.925
157.375
157.425
TRAFFIC TYPE
Public Correspondence, Duplex
Port Operations, Duplex
Port Operations, Duplex
Port Operations, Duplex
Public Correspondence, Duplex
Port Operations, Duplex
Port Operations, Duplex
Commercial, bridge-to-bridge
Boat Operations, Recreational
Port Operations
Digital Selective Calling for
distress safety and calling
Port Operations
Inter-ship
Port Operations
Port Operations
Inter-ship
Non-Commercial, Duplex
Commercial, Duplex
Commercial, Duplex
Port Operations, Duplex
Port Operations, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Public Correspondence, Duplex
Port Operations
Port Operations
SHIP SHIP
TO
TO
SHIP SHORE
NAME TAG
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
TELEPHONE
PORT OPS
PORT OPS
PORT OPS
TELEPHONE
PORT OPS
PORT OPS
BRIDGE COM
SHIP-SHIP
PORT OPS
---
---
DSC
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
PORT OPS
SHIP -SHIP
PORT OPS
PORT OPS
SHIP-SHIP
SHIP-SHORE
SHIP-SHORE
SHIP-SHORE
PORT OPS
PORT OPS
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
SHIP-SHIP
SHIP-SHIP
Note.
(1) CH15, CH17 are fixed with input power 1W.
(2) CH70 is exclusively used for DSC channel and voice transmission is prohibited.
CH75 and CH76 are prohibited from transmitting in order to prevent CH16 from dangerous
interference.
54
6.2. USA Channel
CH
Tx
(MHz)
Rx
(MHz)
TRAFFIC TYPE
SHIP SHIP
TO
TO
SHIP SHORE
NAME TAG
PORT
OPS/VTS
UNAUTHORIZ
ED
PORT
OPS/VTS
SAFETY
COMMERCIAL
COMMERCIAL
CALLING
COMMERCIAL
VTS
PORT
OPS/VTS
01A 156.050 156.050
Port Operations, Selected VTS Areas
YES
YES
03A 156.150 156.150
US Government, Coast Guard
YES
YES
05A 156.250 156.250
Port Operations, Selected VTS Areas
YES
YES
Inter-ship Safety
Commercial
Commercial (Inter-ship Only)
Recreational Calling Channel
Commercial
Commercial, VTS in Selected Areas
YES
YES
YES
YES
YES
YES
NO
YES
NO
YES
YES
YES
Port Operations, Selected VTS Areas
YES
YES
Inter-ship Navigation Safety
(bridge-to-bridge)
YES
NO
Port Operations, Selected VTS Areas
YES
YES
Environmental, RX Only
---
---
YES
YES
YES
YES
YES
YES
YES
YES
PORT
OPS/VTS
ENVIROMENT
AL
DISTRES
SAR
COMMERCIAL
COMMERCIA;
NO
YES
PORT OPS
YES
YES
21A 157.050 157.050 U.S. Government, Canadian Coast Guard YES
YES
22A 157.100 157.100
Coast Guard Liaison
YES
YES
23A 157.150 157.150
U.S. Government, Coast Guard
YES
YES
Public Correspondence, Marine Operator
Public Correspondence, Marine Operator
Public Correspondence, Marine Operator
Public Correspondence, Marine Operator
Public Correspondence, Marine Operator
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
PORT OPS
UNAUTHORIZ
ED
COAST
GUARD
UNAUTHORIZ
ED
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
06
07A
08
09
10
11
12
156.300
156.350
156.400
156.450
156.500
156.550
156.300
156.350
156.400
156.450
156.500
156.550
156.600 156.600
13(2) 156.650 156.650
14
156.700 156.700
15(4) RX Only 156.750
16
17(1)
18A
19A
156.800 International Distress, Safety, and Calling
156.850
State Controlled - 1W Only
156.900
Commercial
156.950
Commercial
Port Operations, Canadian Coast Guard,
20 157.000 161.600
Duplex
20A 157.000 157.000
Port Operations
24
25
26
27
28
156.800
156.850
156.900
156.950
157.200
157.250
157.300
157.350
157.400
161.800
161.850
161.900
161.950
162.000
55
BRIDGE COM
CH
Tx
(MHz)
Rx
(MHz)
TRAFFIC TYPE
61A 156.075 156.075 U.S. Government, Canadian Coast Guard
63A 156.175 156.175 Port Operations, VTS in Selected Areas
U.S. Government, Canadian Commercial
64A 156.225 156.225
Fishing
65A 156.275 156.275
Port Operations
66A 156.325 156.325
Port Operations
67(2) 156.375 156.375
Commercial, bridge-to-bridge
68 156.425 156.425
Boat Operations, Recreational
69 156.475 156.475
Boat Operations, Recreational
70(3)
156.525
Digital Selective Calling - DSC
71 156.575 156.575
Boat Operations, Recreational
72 156.625 156.625
Boat Operations, Recreational
73 156.675 156.675
Port Operations
74 156.725 156.725
Port Operations
75(1) 156.775 156.775
Port Operations - 1W Only
76(1) 156.825 156.825
Port Operations - 1W Only
77(1) 156.875 156.875
Port Operations - 1W Only
78A 156.925 156.925
Boat Operations, Recreational
79A 156.975 156.975
Commercial
80A 157.025 157.025
Commercial
U.S. Government, Environmental
81A 157.075 157.075
Protection Agency Operations
82A 157.125 157.125 U.S. Government, Canadian Coast Guard
83A 157.175 157.175 U.S. Government, Canadian Coast Guard
84 157.225 161.825 Public Correspondence, Marine Operator
84A 157.225 157.225 Public Correspondence, Marine Operator
85 157.275 161.875 Public Correspondence, Marine Operator
85A 157.275 157.275 Public Correspondence, Marine Operator
86 157.325 161.925 Public Correspondence, Marine Operator
86A 157.325 157.325 Public Correspondence, Marine Operator
87 157.375 161.975 Public Correspondence, Marine Operator
87A 157.375 157.375 Public Correspondence, Marine Operator
88 157.425 162.025 Public Correspondence, Marine Operator
88A 157.425 157.425
Commercial, Intership Only
SHIP SHIP
TO
TO
SHIP SHORE
NAME TAG
YES
YES
YES UNAUTHORIZED
YES PORT OPS/VTS
YES
YES UNAUTHORIZED
YES
YES
YES
YES
YES
--YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
--YES
NO
YES
YES
YES
YES
YES
NO
YES
YES
YES
YES UNAUTHORIZED
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
YES UNAUTHORIZED
YES UNAUTHORIZED
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
YES
TELEPHONE
NO
COMMERCIAL
PORT OPS
PORT OPS
BRIDGE COM
SHIP-SHIP
PLEASURE
DSC
PLEASURE
SHIP-SHIP
PORT OPS
PORT OPS
PORT OPS
PORT OPS
PORT OPS
SHIP-SHIP
COMMERCIAL
COMMERCIAL
Note.
(1) CH17, CH75, CH76 and CH77 are fixed with output power 1 W.
(2) CH13, CH67 are fixed with output power 1W. It is possible to change manually output
power 25W
(3) CH70 is exclusively DSC using channel and voice transmission is prohibited.
(4) CH15 is prohibited from transmission in order to prevent CH16 from harmful interferences.
56
6.3. CANADA Channel
CH
Tx
(MHz)
01
02
03
04A
05A
06
07A
08
09
10
11
12
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
13(1) 156.650
14 156.700
15(1) 156.750
16 156.800
17(1) 156.850
18A 156.900
19A 156.950
20(1) 157.000
21 157.050
21A 157.050
21B
22A
23
24
25
25B
26
27
28
28B
RX Only
157.100
157.150
157.200
157.250
RX Only
157.300
157.350
157.400
RX Only
Rx
(MHz)
TRAFFIC TYPE
160.650
Public Correspondence, Duplex
160.700
Public Correspondence, Duplex
160.750
Public Correspondence, Duplex
156.200
Canadian Coast Guard, SAR
156.250 Port Operations, VTS in Selected Areas
156.300
Inter-ship Safety
156.350
Commercial
156.400
Commercial(Inter ship Only)
156.450
Recreational Calling Channel
156.500
Commercial
156.550
Commercial, VTS in Selected Area
156.600 Port Operations, Selected VTS Areas
Inter-ship Navigation Safety
156.650
(bridge-to-bridge) 1W Only
156.700 Port Operations, VTS in Selected Areas
156.750
Commercial - 1W Only
International Distress, Safety, and
156.800
Calling
156.850
State Controlled -1W Only
156.900
Commercial
156.950
Canadian Coast Guard
Canadian Coast Guard, Duplex-1W
161.600
Only
161.650
Port Operations, Duplex
U.S. Government, Canadian Coast
157.050
Guard
161.650
Port Operations, RX Only
157.100
Canadian Coast Guard Liaison
161.750
Public Correspondence, Duplex
161.800
Public Correspondence, Duplex
161.850
Public Correspondence, Duplex
161.850
Public Correspondence, RX Only
161.900
Public Correspondence, Duplex
161.950
Public Correspondence, Duplex
162.000
Public Correspondence, Duplex
162.000
Public Correspondence, RX Only
57
SHIP TO SHIP TO
SHIP
SHORE
NAME TAG
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
NO
YES
YES
YES
YES
TELEPHONE
TELEPHONE
TELEPHONE
CANADIAN CG
PORT OPS/VTS
SAFETY
COMMERCIAL
COMMERCIAL
CALLING
COMMERCIAL
VTS
PORT OPS/VTS
YES
NO
BRIDGE COM
YES
YES
YES
YES
PORT OPS/VTS
COMMERCIAL
YES
YES
DISTRESS
YES
YES
YES
YES
YES
YES
SAR
COMMERCIAL
CANADIAN CG
NO
YES
CANADIAN CG
NO
YES
PORT OPS
YES
YES
UNAUTHORIZED
--YES
NO
NO
NO
--NO
NO
NO
---
--YES
YES
YES
YES
--YES
YES
YES
---
PORT OPS
CANADIAN CG
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
CH
Tx
(MHz)
Rx
(MHz)
60 156.025 160.625
61A 156.075 156.075
62A 156.125 156.125
64 156.225 160.825
64A 156.225 156.225
65A 156.275
66A 156.325
67 156.375
68 156.425
69 156.475
70(2)
71 156.575
72 156.625
73 156.675
74 156.725
77 156.875
78A 156.925
79A 156.975
80A 157.025
81A 157.075
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.875
156.925
156.975
157.025
157.075
82A 157.125 157.125
83 157.175 161.775
83A 157.175 157.175
83B RX Only 161.775
84 157.225 161.825
85 157.275 161.875
86 157.325 161.925
87 157.375 161.975
88 157.425 162.025
TRAFFIC TYPE
Public Correspondence, Duplex
U.S. Government, Canadian Coast
Guard
Canadian Coast Guard
Public Correspondence, Duplex
U.S. Government, Canadian
Commercial Fishing
Port Operations
Port Operations
Commercial, SAR
Boat Operations, Recreational
Commercial Fishing Only
Digital Selective Calling - DSC
Boat Operations, Recreational
Inter-ship
Commercial Fishing Only
Commercial Fishing Only
Port Operations
Boat Operations, Recreational
Commercial
Commercial
U.S. Government Operations
U.S. Government, Canadian Coast
Guard
Canadian Coast Guard
U.S. Government, Canadian Coast
Guard
Canadian Coast Guard, RX Only
Public Correspondence, Marine
Operator
Public Correspondence, Marine
Operator
Public Correspondence, Marine
Operator
Public Correspondence, Marine
Operator
Public Correspondence, Marine
Operator
SHIP TO SHIP TO
SHIP SHORE
NO
YES
TELEPHONE
YES
YES
UNAUTHORIZED
YES
NO
YES
YES
CANADIAN CG
TELEPHONE
YES
YES
UNAUTHORIZED
YES
YES
YES
YES
YES
--YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
--YES
NO
YES
YES
YES
NO
YES
YES
YES
PORT OPS
PORT OPS
COMMERCIAL
SHIP-SHIP
COMMERCIAL
DSC
PLEASURE
SHIP-SHIP
COMMERCIAL
COMMERCIAL
PORT OPS
SHIP-SHIP
COMMERCIAL
COMMERCIAL
UNAUTHORIZED
YES
YES
UNAUTHORIZED
YES
YES
CANADIAN CG
YES
YES
UNAUTHORIZED
---
---
CANADIAN CG
NO
YES
TELEPHONE
NO
YES
TELEPHONE
NO
YES
TELEPHONE
NO
YES
TELEPHONE
NO
YES
TELEPHONE
Note.
(1) CH13, CH15, CH17 and CH20 are fixed with output power 1W.
(2) CH70 is exclusively DSC using channel and voice transmission is prohibited.
(3) CH63, CH75 and CH76 are prohibited from transmitting.
* CH66, CH77 are basically 1W and are available for converting to 25W..
58
NAME TAG
6.4. Weather Channel
WEATHER CH
Rx(MHz)
Type
Channel Type
WX1
WX2
WX3
WX4
WX5
WX6
WX7
WX8
WX9
WX10
162.550
162.400
162.475
162.425
162.450
162.500
162.525
161.650
161.775
163.275
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WEATHER CHANNEL
CANADIAN WEATHER CHANNEL
CANADIAN WEATHER CHANNEL
NOAA WEATHER CHANNEL
NOAA WX
NOAA WX
NOAA WX
NOAA WX
NOAA WX
NOAA WX
NOAA WX
CANADA WX
CANADA WX
NOAA WX
59
Chapter 7. Position Information Interface
This unit is effectively designed for convenient use, after receiving NMEA0183
FORMAT Typed GPS information that will interface internally and input automatically
with current own vessel’s latitude and longitude value when distress call is occurred.
It is available to input the time when determined with position information and position
by manual. In case not receiving position data from electronic position-determined
device, and/or in case position information conducted by manual input being delayed
more than 4 hours, alarm is ringing. Any position information, which is not updated
more than 23 hours should be deleted. Alarm will ring if GPS is not input more than 1
minute and alarm would stop when GPS is input again.
NMEA0183 input mode and type for this unit is as follows,
$GPGGA,065501,3506.3023,N,12905.6429,E,1,07,001.3,00005,M,0000,M,,*41
$GPGGA,032007,3505.10,N,12902.47,E,1,00,1,0,M,,M,,
$GPGGA,044610.00,3505.2139,N,12904.2867,E,1,06,05.4,,M,,M,,*63
$GPRMC,123456,A,3505.00,N,12902.00,E,1.0,0.0,221199,0.0,E*00
$GPRMC,123456,A,3505.0000,N,12902.0000,E,1.0,0.0,221199,0.0,E*00
$GPRMC,044610.00,A,3505.2139,N,12904.2867,E,00.2,229.1,180702,,*0D
$GPGLL,3504.2892,N,12900.2503,E,024950.00,V*14
$GPGLL,3505.09,N,12902.45,E*PCL
$GPZDA,025220.00,17,04,1999,00,00*6B
$GPZDA,050048,13,09,1998,+00
60
Chapter 8. Packing List
8.1. Oversea
VHF STR-6000A Standard
NO
Item
Feature
Dimension
Q’ty
Check
STR-6000A
CODE NO.
CODE NO.
L=3m
Mic Holder
GPS Plug
CODE NO.
CODE NO.
CODE NO.
10
Fuse
11
Manual
STR-6103
STR-595
10A(20mm)
CODE NO.
STR-598
STR-6000A-ME
CODE NO.
61
A-01
A-07
A-03
Hook
INCL. Cable
20
STR-594
KIV 5.5mm2
CODE NO.
Attached to
Main unit
STR-6003
Ø4 X 16
Steel Piece
Ground
Cable
STR-6102
RCA Plug
L=2m
CODE NO.
STR-6002
CVV-SB 2C 1.25SQ
Power Cable
A-04
STR-6001
Ø5mm × 7
Fixing Bolt
STR-6101
ACC-6000D-001
Bracket
CODE NO.
STR-6100
SS-6000
Speaker
CODE NO.
SM-6000
INCL. MIC
Main Unit
Remark
STR-6105
A-06
Spare Part
VHF STR-6000A Option
NO
Item
Antenna
VHF
Antenna
Cable
Antenna
Bracket
U-Bolt
Feature
Dimension
SAN-150
CODE NO.
STR-585
RG-8U
L=15m
CODE NO.
Power
Supply
Power
Supply
AC Power
Cable
DC Power
Cable
DC Power
Cable/ B.K
Cable
10
Power Fuse
11
Power Fuse
12
Flush Mount
(Bracket)
CODE NO.
Ground
Cable
STR-581
SP-6000AD
CODE NO.
STR-582
CVV-SB 2C 2SQ
L=3m
CODE NO.
STR-588
CVV-SB 2C 2SQ
L=3m
CODE NO.
STR-589
CVV-SB 4C 1.25SQ
L=3m
CODE NO.
STR-590
3A(20mm)
CODE NO.
STR-597
10A(20mm)
CODE NO.
Remark
A-02
PL-259 x 4
B-01
SCN-20-2P
B-02
SCN-20-3P
B-03
SCN-16-4P
SCN-20-4P
STR-601
SP-580AD
STR-598
Spare Part
Spare Part
INCL. Bolt
SMB-60
CODE NO.
13
STR-599
Ø63 X 80mm
CODE NO.
Check
STR-586
78 X 200
CODE NO
Q’ty
STR-6007
KIV 5.5mm2
CODE NO
62
STR-595
A-06
8.2. Domestic
VHF STR-6000A Standard(1 of 2)
NO
Item
Feature
Dimension
STR-6000A
Main Unit
CODE NO.
Q’ty
Check
Remark
SM-6000
INCL. MIC
STR-6100
SS-6000
Speaker
CODE NO.
ACC-6000D-001
Bracket
CODE NO.
CODE NO.
Mic Holder
GPS Plug
CODE NO.
Steel Piece
Ground
Cable
Fuse
10
Antenna
11
VHF
Antenna
Cable
12
Antenna
Bracket
CODE NO.
STR-6103
KIV 5.5mm2
STR-595
10A(20mm)
CODE NO.
A-07
A-03
Hook
INCL. Cable
STR-6003
Ø4 X 16
CODE NO.
STR-594
CODE NO.
Attached to
Main unit
STR-6002
RCA Plug
L=2m
STR-6001
Ø5mm × 7
Fixing Bolt
A-04
STR-6101
STR-598
SAN-150
CODE NO.
STR-585
20
A-06
Spare Part
RG-8U
L=15m
CODE NO.
STR-586
78 X 200
CODE NO
63
STR-599
A-02
PL-259 x 4
VHF STR-6000A Standard(2 of 2)
NO
Item
Feature
Dimension
Q’ty
Check
Remark
B-01
SCN-20-2P
B-02
SCN-20-3P
B-03
SCN-16-4P
SCN-20-4P
Ø63 X 80mm
13
U-Bolt
CODE NO.
14
Power
Supply
15
AC Power
Cable
16
17
DC Power
Cable
DC Power
Cable
18
Power Fuse
19
Power Fuse
20
Ground
Cable
21
Manual
STR-601
SP-580AD
CODE NO.
STR-581
CVV-SB 2C 2SQ
L=3m
CODE NO.
STR-588
CVV-SB 2C 2SQ
L=3m
CODE NO.
STR-589
CVV-SB 4C 1.25SQ
L=3m
CODE NO.
STR-590
3A(20mm)
CODE NO.
STR-597
10A(20mm)
CODE NO.
STR-598
Spare Part
Spare Part
KIV 5.5mm2
CODE NO.
STR-595
A-06
STR-6000A-MK
CODE NO.
STR-6106
VHF STR-6000A Option
NO
Item
Feature
Dimension
SMB-60
Flush Mount
(Bracket)
CODE NO.
DC Power
Cable/ B.K
Cable
Power
Supply
CODE NO.
64
Remark
INCL. Bolt
SCN-16-4P
SCN-20-4P
D-SUB 15P
STR-6190
SP-6000AD
CODE NO.
Check
STR-6007
CVV-SB 2C 2SQ
(AWG#24)
L=3m
Q’ty
STR-582
B-03
Chapter 9. Block Diagram
65
Chapter 10. Overall Drawing
66
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:05:02 18:12:12+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:05:03 09:55:13+09:00
Metadata Date                   : 2006:05:03 09:55:13+09:00
Format                          : application/pdf
Title                           : Microsoft Word - STR-6000A영문취급설명서_FCC_.doc
Creator                         : Administrator
Document ID                     : uuid:e2a488a9-0c03-4a13-b1d1-2a6f4feb1d02
Instance ID                     : uuid:3c9916d6-1862-402e-8f10-a37aef9ca371
Page Count                      : 66
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RN6STR-6000A

Navigation menu