SISTEMATICA S p A NIMBLE Remote Controlled Outputs Actuator User Manual Receiver NIMBLE PLUS 868 REV 0
SISTEMATICA S.p.A. Remote Controlled Outputs Actuator Receiver NIMBLE PLUS 868 REV 0
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1968067 |
| Application ID | 4rggtNk1Wa3610HiJDnK5w== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.69kB (246167 bits) |
| Date Submitted | 2013-05-18 00:00:00 |
| Date Available | 2013-05-20 00:00:00 |
| Creation Date | 2013-03-07 14:06:36 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2013-03-07 14:06:36 |
| Document Title | Receiver NIMBLE PLUS 868 REV.0 |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | documentazione |
RTX NIMBLE PLUS RADIO REMOTE CONTROL 2 COMMAND WITH BUTTONS USER AND MAINTENANCE MANUAL WARNINGS This manual is an essential part of the device and it should be thoroughly kept for later consultation. Carefully read the warnings contained in this manual, concerning safety and a proper preservation of the product. These warnings are always to be carefully read before using the device. SISTEMATICA S.p.A. declines all responsibility for any trouble arising from the non-compliance with these warnings. • • • • • DO NOT TRAVEL WITH THE DEVICE SWITCHED ON CONNECT THE SYSTEM ONLY TO THE VEHICLE’S BATTERY BEFORE CARRYING OUT ANY MECHANICAL MAINTENANCE OPERATION (WELDING) ON THE VEHICLE, DISCONNECT THE BATTERY CLIPS AVOID ATTEMPTING TO REPAIR THE DEVICE BY YOURSELF. REPAIRS PERFORMED BY UNSKILLED PEOPLE CAN CAUSE SERIOUS DAMAGES OR FAILURES. FOR ASSISTANCE, APPLY TO YOUR LOCAL AUTHORIZED SERVICE CENTRE. USE ONLY ORIGINAL SPARE PARTS ALWAYS KEEP AT A SAFE DISTANCE FROM THE MOVING PARTS SISTEMATICA S.p.A. Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715 http://www.sistematica.it e-mail: info@sistematica.it Rev.0 06/03/2013 TECHNICAL FEATURES • • • • • • • • • • • • Number of outputs: 2; Frequency bands: ISM 868/915 MHz Microprocessor electronics control; Dimension: 190x83x22 (with antenna); Gradeo of enclosure: IP67; Protection of battery inversion polarity; 12/24 VDC (10-30 allowed) rating power supply through connection to the vehicle’s battery; Typical quiescent current:- 18 mA a 12 V; - 14 mA a 24 V; Interal resettable fuse: 7 A Maximum suppliable current for each channel: 5 A Maximum total suppliable current: 7 A Receiver Category (EN 300-220-1): 2 SYSTEM CODING It is necessary to code the system only if you have to replace the transmitter unit or if you want to use it with a different receiver from the one it was purchased with. Follow the instructions to code the system. 1. Take the power supply off the receiver; 2. Disconnect the white or gray cable from negative pole of the battery and connect it to the positive pole of the battery; 3. Put power into the receiver. The led on the receiver start to blink; 4. Press any 3 keys at the same time on the radio control transmitter within 15 seconds since it has been switched on (also more times if it is necessary); 5. At this point, the coding occurred. The led on the receiver turn off; 6. Take the power supply off the receiver; 7. Disconnect the white or gray cable from positive pole of the battery and connect it to the negative pole of the battery; 8. Put power into the receiver with the connector inserted to verify correct operation (press key START on the transmitter and abilitate the outputs). INSTRUCTION FOR USE NOTE: is necessary conncet gray cable with black cable to the negative pole of the battery. NOTE: is necessary conncet white cable with black cable to the negative pole of the battery. For correct use and in order to avoid damage to people or things, it is obligatory to follow these instructions: 5 WIRES VERSION 7 WIRES VERSION 1. Power up the receiver and wait a few swconds 1. Power up the receiver and wait a few swconds (the receiver takes a couple of seconds to be (the receiver takes a couple of seconds to be able to operate a sit carries out an selfable to operate a sit carries out an selfdiagnosis); diagnosis); 2. Press the required button on the receiver to 2. Press the required button on the receiver to activate the related output: activate the related output: LEFT BUTTON → OUT 1 LEFT BUTTON → OUT 1 + M.O. + OUT EM. RIGHT BUTTON → OUT 2 RIGHT BUTTON → OUT 2 + M.O. + OUT EM. 3. Turn off the receiver after finishing operations. 3. Turn off the receiver after finishing operations. LEFT RIGHT WIRE FUNCTION WIRE FUNCTION GREEN OUT 1 GREEN OUT 1 YELLOW OUT 2 YELLOW OUT 2 WHITE PAIRING WHITE MASTER OUTPUT RED + ALIMENTATION PINK EMERGENCY OUT BLACK - ALIMENTATION GRAY PAIRING RED + ALIMENTATION BLACK - ALIMENTATION To operate from the transmitter, consult the user manual of the transmitter coupled with the receiver. SISTEMATICA S.p.A. Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715 http://www.sistematica.it e-mail: info@sistematica.it Pag. 2/4 POSITIONING OF THE RECEIVER UNIT, DIMENSION AND DRILLING TEMPLATE For a proper functioning, locate the receiver type NIMBLE with the cable output downwards, as shown in the picture below: The receiver is provided with an integrated antenna; be sure to locate it at sight, not inside any metal box or screened by ferrous masses (ex. protection carter…) For the receiver installation use supplied fixing screaw (or equivalent) POSITIONING OF THE RECEIVER NIBLE DIMENSION DRILLING TEMPLATE NIMBLE DIMENSION BOX RECEIVER NIMBLE FUSE The system is automatically protected from power overload and from possible short-circuit on corresponding outputs by an internal resettable fuse (7A). SISTEMATICA S.p.A. Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715 http://www.sistematica.it e-mail: info@sistematica.it Pag. 3/4 PRODUCT IDENTIFYING LABELS NIMBLE: product model S/N: product derial number Cod.: product identification code POSITIONING ON THE RECEIVER OF THE IDENTIFICATION LABEL RECEIVER IDENTIFICATION LABEL Removal of the identifying labels entails lapsing of the guarantee conditions and the responsibility of SISTEMATICA S.p.A. with respect to competent bodies PROBLEM IDENTIFICATION AND SOLUTION PROBLEM POSSIBLE CAUSES SOLUTIONS Absence of power in the receiver unit The system does not respond to the controls Incorrect connection cabling to the utilities Incorrect installation receiver System not coded of the of the -Check that the emergency mushroom button on the transmitter is in the release position -Check that the vehicle battery is correctly connected to the receiver unit -Check the cabling to the users (indicators, electro-valves etc.) -The receiver must not be shielded by ferrous masses (see “POSITIONING OF THE RECEIVER UNIT”) -Re-code the system (see “CODING THE SYSTEM”) CE MARK Declaration of conformity for Sistematica S.p.A. products can be required at: info@sistematica.it This product may be subjected to usage restriction. Please contact info@sistematica.it for any further questions. FCC STATEMENTS These devices complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) these devices may not cause harmful interference and (2) these devices must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to these equipment. Such modifications could void the user’s authority to operate the equipments. SISTEMATICA S.p.A. Grantee Code: O8I NIMBLE RTX label example FCC ID: O8INIMBLE SISTEMATICA S.p.A. Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715 http://www.sistematica.it e-mail: info@sistematica.it Pag. 4/4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 5bec5178-8983-11e2-0000-0b0e0a895872 Producer : GPL Ghostscript 9.0 Keywords : () Modify Date : 2013:03:07 14:06:36+01:00 Create Date : 2013:03:07 14:06:36+01:00 Creator Tool : PDFCreator Version 1.2.0 Document ID : 5bec5178-8983-11e2-0000-0b0e0a895872 Format : application/pdf Title : Receiver NIMBLE PLUS 868 REV.0 Creator : documentazione Description : () Author : documentazione Subject :EXIF Metadata provided by EXIF.tools