SYRIS Technology SYRD245-1N-M RFID Reader User Manual
SYRIS Technology Corp. RFID Reader
User manual
SYRD245-1N-M 2.45 GHz RFID Network Reader User Manual Version 1.7 2007/04/23 SYRD245-1N-M active RFID Network Reader User Manual Ⅰ. Product Specification Communication 2.45 GHz Support read and write Frequency 2.40~2.48 GHz Channel 316 Address 65536 RSSI 0-255 LQI 0-255 Programmable Set Parameter LED Multi-LED visual indication Ethernet 10/100 base-T Ethernet (RJ-45) RS-232 RX, TX Protocols ICMP, ARP, IP, TCP(Server/Client), UDP, DHCP, HTTP Baud Rate 2,400 bps ~ 115,200 bps Power Input 7.5 VDC ~ 28 VDC Action Current MAX 300 mA @ 12 VDC Operating Temperature -20 oC to 65 oC, 5 to 95%RH Storage Temperature -30 oC to 85 oC, 5 to 95%RH Dimension 107W x 138H x 30D (mm) SYRD245-1N-M active RFID Network Reader User Manual Ⅱ. The Diagram of the System Connection SYRD245-1N-M Network Reader can connect with 3 different interfaces: RJ-45, RS-485 or RS-232. SYRD245-1N-M connection to PC SYRD245-1N-M active RFID Network Reader User Manual Ⅲ. Install Network Enabler Administrator 1. Execute install program in SYRIS CD: SYRIS Xtive CD-ROM\SYRD245-1\Driver\ Network Enabler Administrator 2.8 Setup.exe 2. Execute Network Enabler Administrator program after install. SYRD245-1N-M active RFID Network Reader User Manual Ⅳ. Setup Network Enabler Administrator 1. Click on Configuration from the menu bar, and then select Broadcast Search from the drop-down menu. 2. A Searching window will open, showing that the program is searching for network module connected to this network. SYRD245-1N-M active RFID Network Reader User Manual 3. After the search is finished, all network module found will be shown in the right panel of the Configuration window. If you locate more than one module connected to this network, refer to the MAC address on the module(s) to determine which modules are the ones you wish to configure. 4. Double click selected network module you wish to configure, the Configuration window will open. SYRD245-1N-M active RFID Network Reader User Manual 5. The Configuration window has 9 tabs: Basic, Network, Serial, Operating Mode, Accessible IPs, Auto Warning, IP Address Report, Password and Digital IO. SYRIS SYRD245-1N series will use 3 tabs in network module. (Network, Serial and Operating Mode), we will show more detail with these parts below. 6. Network: You must assign a valid IP address to network module before it will work in your network environment. Your network system administrator should provide you with an IP address and related settings for your network. The IP address must be unique within the network. You can choose from four possible IP Configuration modes: Static, DHCP, DHCP/BOOTP and BOOTP. Method Function Definition Static User defined IP address, Netmask, Gateway. DHCP DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time Server DHCP/BOOTP DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time Server, or BOOTP Server assigned IP address BOOTP BOOTP Server assigned IP address SYRD245-1N-M active RFID Network Reader User Manual SYRD245-1N-M active RFID Network Reader User Manual 7. Serial: You should set up network module serial parameters as below diagram. SYRD245-1N-M active RFID Network Reader User Manual 8. Operating Mode: Three different Socket Modes and one real COM modes are available: TCP Server, TCP Client, and UDP Server/Client. The main difference between the TCP and UDP protocols is that TCP guarantees delivery of data by requiring the recipient to send an acknowledgement to the sender. UDP does not require this type of verification, making it possible to offer speedier delivery. UDP also allows multicasting of data to groups of IP addresses. SYRD245-1N-M active RFID Network Reader User Manual Ⅴ. Real COM mode ¾ Setting Operating Mode Select Modify and chose COM port to change operating mode. Change operating mode to “Real COM Mode” and press “OK” to submit the settings. 10 SYRD245-1N-M active RFID Network Reader User Manual ¾ COM Mapping 1. Broadcast Search for network module on the network. 2. Select the COM Mapping in function group. 3. Add the target to which you would like to map COM ports. 11 SYRD245-1N-M active RFID Network Reader User Manual 4. The network modules list that appears will be based on the Broadcast Search on the Configuration. Select the network modules to which you want to map COM ports. 5. System will auto match a COM port with selected network modules. 6. Select COM Setting to modify COM No., default setting, etc. 12 SYRD245-1N-M active RFID Network Reader User Manual 7. Select the COM Number. Those “in use”, “assigned” COM ports will also be indicated in this dialog window. 8. Set COM port parameter settings as below diagram. 13 SYRD245-1N-M active RFID Network Reader User Manual 9. After set the COM Mapping, remember to select Apply Change to save the information in the host system registry. The host computer will not be able to use the COM port until after selecting Apply Change. 10. When you finished COM Mapping, you can execute SYRIS Xtive Utility program to read TAG and set parameters. (Please refer to Xtive Utility user manual) 14 SYRD245-1N-M active RFID Network Reader User Manual ¾ Remove COM Mapping Select Remove Target and Apply Change to remove COM Mapping with host. 15 SYRD245-1N-M active RFID Network Reader User Manual Ⅵ. TCP Server Mode In TCP Server mode, SYRD245-1N-M reader provides a unique IP:Port address on a TCP/IP network. SYRD245-1N-M reader wait passively to be contacted by the host computer, allowing the host computer to establish a connection with and get data from the serial device. 1. Setting Operating Mode Select Modify and chose COM port to change operating mode. 16 SYRD245-1N-M active RFID Network Reader User Manual Change operating mode to “TCP Server Mode” and press “OK” to submit the settings. 17 SYRD245-1N-M active RFID Network Reader User Manual 2. When you finished change operating mode, you can execute SYRIS Xtive demo program to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\XtiveDemo.exe) 3. Select and modify correct IP address to communicate with Reader. (You can communicate multi-reader at the same time) Starting read TAG will receive Tag information from reader. 18 SYRD245-1N-M active RFID Network Reader User Manual 4. Field Introduction: a. UID: Tag’s identification number. b. RSSI: Received Signal Strength Indication (0-255). Reading range and RSSI are inverse proportion. c. LQI: Link quality indicator (0-255). d. DI: TAG status and indicator. [BAT] means TAG battery was low. [SW] means TAG call button was clicked. [SENSOR] means light sensor have detect light. (Only for Wristband TAG) [START] means TAG restart. e. T1: Ambient temperature sensor (Only for Wristband TAG) f. T2: Skin temperature sensor (Only for Wristband TAG) Note: T1 / T2 / SENSOR use for anti-tamper capability. 5. Select TAG ID to sift the target TAG from left window to right window. 19 SYRD245-1N-M active RFID Network Reader User Manual 6. Select “View Select TAG” tab to get target TAG information. 20 SYRD245-1N-M active RFID Network Reader User Manual Ⅶ. TCP Client Mode In TCP Client mode, SYRD245-1N-M reader can actively establish a TCP connection to a pre-defined host computer when serial data arrives. 1. Setting Operating Mode Select Modify and chose COM port to change operating mode. 21 SYRD245-1N-M active RFID Network Reader User Manual Change operating mode to “TCP Client Mode” and “Destination Host” IP address than press “OK” to submit the settings. 22 SYRD245-1N-M active RFID Network Reader User Manual 1. When you finished change operating mode, you can execute SYRIS Xtive demo program to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\XtiveDemo.exe) 2. Select “TCP Client” Tab and starting read TAG will receive Tag information from reader. 23 SYRD245-1N-M active RFID Network Reader User Manual Ⅷ. UDP mode Compared to TCP communication, UDP is faster and more efficient. In UDP mode, you can multicast data from the SYRD245-1N-M to multiple host computers, and the serial device can also receive data from multiple host computers, making this mode ideal for message display applications. 1. Setting Operating Mode Select Modify and chose COM port to change operating mode. 24 SYRD245-1N-M active RFID Network Reader User Manual 2. Change operating mode to “UDP Mode” and “Destination” IP address than press “OK” to submit the settings. 25 SYRD245-1N-M active RFID Network Reader User Manual 3. When you finished change operating mode, you can execute SYRIS Xtive demo program to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\XtiveDemo.exe) 4. Select “UDP” Tab and starting read TAG will receive Tag information from reader. 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:09:08 09:02:05+08:00 Create Date : 2008:09:05 13:47:20+08:00 Metadata Date : 2008:09:08 09:02:05+08:00 Format : application/pdf Title : Microsoft Word - 使用手冊SYRD245-1N user manual v0170.doc Creator : admin Document ID : uuid:ecf311fc-e183-4b93-b1db-142209be7424 Instance ID : uuid:0e8457c2-b797-42a0-be7c-624cc0e569f2 Has XFA : No Page Count : 29 Author : adminEXIF Metadata provided by EXIF.tools