Samsung Electronics Co CLP680DW Laser Multi-funtion Printer User Manual Rousseau Klimt english1

Download:
Mirror Download [FCC.gov]
Document ID	1682014
Application ID	FbPoAyhrjrbtPPocrtbFIQ==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	448.63kB (5607815 bits)
Date Submitted	2012-04-23 00:00:00
Date Available	2012-04-23 00:00:00
Creation Date	2017-11-01 00:00:16
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-01 00:00:16
Document Title	Rousseau_Klimt_english1.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Mia

Media and tray
Tray 1
Optional traya
Manual feeder/ Multipurpose tray
Thin
Ɣ
Ɣ
Ɣ
Cotton
Ɣ
Ɣ
Color
Ɣ
Ɣ
Preprinted
Ɣ
Ɣ
Recycled
Ɣ
Envelope
Ɣ
Ɣ
Transparency
Ɣ
Ɣ
Labels
Ɣ
Ɣ
CardStock
Ɣ
Ɣ
Ɣ
Bond
Ɣ
Ɣ
Ɣ
Archive
Ɣ
Ɣ
Ɣ
Letterhead
Ɣ
Ɣ
Ɣ
Punched
Ɣ
Ɣ
Ɣ
Glossy Photo
Ɣ
Ɣ
Ɣ
Types
Envelope
Printing successfully on envelopes depends upon the quality of the envelopes.
To print an envelope, place it as shown in the following figure.
Ɣ
Ɣ
CLP-41xN Series/CLP-41xNW Series
•
a. CLP-68xND Series/CLP-68xDW Series only.
(Ɣ: Supported, Blank: Not supported)
CLP-68xND Series/ CLP-68xDW Series
When selecting envelopes, consider the following factors:
Weight: should not exceed 90 g/m2 otherwise; jams may occur.
Construction: should lie flat with less than 6 mm curl and should not
contain air.
Condition: should not be wrinkled, nicked, nor damaged.
Temperature: should resist the heat and pressure of the machine
during operation.
•
Use only well-constructed envelopes with sharp and well-creased folds.
•
Do not use stamped envelopes.
2. Menu Overview and Basic Setup
38
Media and tray
•
Do not use envelopes with clasps, snaps, windows, coated lining, selfadhesive seals, or other synthetic materials.
•
Do not use damaged or poorly made envelopes.
•
Be sure the seam at both ends of the envelope extends all the way to the
corner of the envelope.
Transparency
In case of color printing using transparencies, the picture quality would be
lower than mono printing when the printouts are used on the overhead
projector.
To avoid damaging the machine, use only transparencies designed for use in
laser printers.
Acceptable
Unacceptable
•
Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s fusing
temperature for 0.1 second about 170°C (338 °F). The extra flaps and strips
might cause wrinkling, creasing, or jams, and may even damage the fuser.
•
For the best print quality, position margins no closer than 15 mm from the
edges of the envelope.
•
Avoid printing over the area where the envelope’s seams meet.
CLP-41xN Series/CLP-41xNW Series
CLP-68xND Series/ CLP-68xDW Series
•
Must withstand the machine’s fusing temperature.
•
Place them on a flat surface after removing them from the machine.
•
Do not leave unused transparencies in the paper tray for long. Dust and dirt
may accumulate on them, resulting in spotty printing.
•
To avoid smudging caused by fingerprints, handle them carefully.
2. Menu Overview and Basic Setup
39
Media and tray
•
To avoid fading, do not expose printed transparencies to prolonged
sunlight.
Labels
•
Ensure that transparencies are not wrinkled, curled, or have any torn edges.
•
Do not use transparencies that separate from the backing sheet.
To avoid damaging the machine, use only labels designed for use in laser
printers.
•
To prevent transparencies from sticking to each other, do not let the printed
sheets stack up as they are being printed out.
•
Recommended media: Transparency for a color laser printer by Xerox, such
as 3R 91331(A4), 3R 2780 (Letter).
CLP-41xN Series/CLP-41xNW Series
•
CLP-68xND Series/ CLP-68xDW Series
When selecting labels, consider the following factors:
Adhesives: Should be stable at your machine’s fusing temperature
about 170°C (338°F).
Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets that have spaces between the labels, causing
serious jams.
Curl: Must lie flat with no more than 13 mm of curl in any direction.
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
2. Menu Overview and Basic Setup
40
Media and tray
•
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can cause
paper jams. Exposed adhesive can also cause damage to machine
components.
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the machine.
•
Do not use labels that are separating from the backing sheet or are wrinkled,
bubbled, or otherwise damaged.
Preprinted paper
When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
Card stock/ Custom-sized paper
CLP-41xN Series/CLP-41xNW Series
CLP-41xN Series/CLP-41xNW Series
•
CLP-68xND Series/ CLP-68xDW Series
•
Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second (about 170°C (338°F)).
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
CLP-68xND Series/ CLP-68xDW Series
In the software application, set the margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
2. Menu Overview and Basic Setup
41
Media and tray
Glossy Photo
•
Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
•
Recommended media: Glossy paper (A4) for this machine by HP Superior
Paper 160 glossy (Product: Q6616A).
Press Paper Size or Paper Type.
Select the option you want.
Press OK to save the selection.
Press
(Cancel) to return to ready mode.
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
• The settings set from the machine driver override the settings on the
control panel.
a To print from an application, open an application and start the print
menu.
b Open Printing Preferences (see "Opening printing preferences" on
page 46).
c Press the Paper tabGand select an appropriate paper.
• You can set the machine’s settings by using the Device Settings in
6DPVXQJ(DV\3ULQWHU0DQDJHUprogram.
- For Windows and Macintosh users, you set from Samsung Easy
Printer Manager!
• If you want to use special-sized paper such as billing paper, select the
Paper tab > Size > Edit... and set CustomGPaper Size Settings in the
Printing Preferences (see "Opening printing preferences" on page 46).
(Switch to advanced mode)!Device
Settings, see "Device Settings" on page 234.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Select
(Menu) button on the control panel.
Press Paper and select the tray you want.
2. Menu Overview and Basic Setup
42
Media and tray
Using the output support
The surface of the output tray may become hot if you print a large number
of pages at once. Make sure that you do not touch the surface, and do not
allow children near it.
The printed pages stack on the output support, and the output support will help
the printed pages to align. Unfold the output support.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 17).
2. Menu Overview and Basic Setup
43
Basic printing
For special printing features, refer to the Advanced Guide (see "Using
advanced print features" on page 207).
Select your machine from the Select Printer list.
The basic print settings including the number of copies and print range
are selected within the Print window.
Printing
If you are a Macintosh, Linux, or Unix operating systems user, refer to the
Advanced Guide (see "Macintosh printing" on page 216, "Linux printing" on
page 217, or "Unix printing" on page 219).
The following Printing Preferences window is for Notepad in Windows 7.
Open the document you want to print.
Select Print from the File menu.
To take advantage of the advanced printing features, click Properties or
Preferences from the Print window (see "Opening printing preferences" on
page 46).
To start the print job, click OK or Print in the Print window.
2. Menu Overview and Basic Setup
44
Basic printing
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as
follows:
•
You can access this window by simply double-clicking the machine icon
•
) in the Windows task bar.
You can also cancel the current job by pressing
(Cancel) on the control
panel.
2. Menu Overview and Basic Setup
45
Basic printing
Opening printing preferences
The screenshot may differ depending on model.
• The Printing Preferences window that appears in this user’s guide may
differ depending on the machine in use.
• When you select an option in Printing Preferences, you may see a
warning mark
or . An
mark means you can select that certain
mark means you cannot
option but it is not recommended, and an
select that option due to the machine’s setting or environment.
Open the document you want to print.
Select Print from the file menu. The Print window appears.
Select your machine from the Select Printer.
Click Properties or Preferences.
• You can apply Eco features to save paper and toner before printing (see
"Easy Eco Driver" on page 227).
• You can check the machine’s current status pressing the Printer Status
button (see "Using Samsung Printer Status" on page 235).
2. Menu Overview and Basic Setup
46
Basic printing
Using a favorite setting
To use a saved setting, select it in the Favorites tab. The machine is now set
to print according to the settings you have selected.
The Favorites option, which is visible on each preferences tab except for the
Samsung tab, allows you to save the current preferences for future use.
To delete saved settings, select it in the Favorites tab and click Delete.
To save a Favorites item, follow these steps:
Change the settings as needed on each tab.
10
Using help
Enter a name for the item in the Favorites input box.
Click the option you want to know on the Printing Preferences window and
press F1 on your keyboard.
Click Save.
Enter name and description, and then select the desired icon.
Click OK. When you save Favorites, all current driver settings are saved.
2. Menu Overview and Basic Setup
47
Basic printing
11
Eco printing
Select
Select the option you want and press OK.
•
The Eco function cuts toner consumption and paper usage. The Eco function
allows you to save print resources and lead you to eco-friendly printing.
If you press the Eco button from the control panel, eco mode is enabled. The
default setting of Eco mode is duplex (CLP-68xND Series/CLP-68xDW Series
only), Multiple Pages per Side (2-up), skip blank pages.
Default Mode: Select this to turn on or off the eco mode.
Off: Set the eco mode off.
On: Set the eco mode on.
If you set the eco mode on with a password from the SyncThru™ Web
Service (Settings tab > Machine Settings > System > Eco > Settings) or
6DPVXQJ(DV\3ULQWHU0DQDJHU(Device Settings > Eco), the On force
message appears. You have to enter the password to change the eco mode
status.
You can set the machine’s settings by using the Device Settings in
6DPVXQJ(DV\3ULQWHU0DQDJHUprogram.
• For Windows and Macintosh users, you set from Samsung Easy Printer
Manager!
(Switch to advanced mode)!Device Settings, see
"Device Settings" on page 234.
•
Setting Eco mode on the control panel
• The settings set from the machine’s driver override the settings on the
control panel.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
(Menu) > System Setup > Eco Setup on the control panel.
Change Temp.: Follow the settings from Syncthru™ Web Service or
6DPVXQJ(DV\3ULQWHU0DQDJHU. Before you select this item, you
must set the eco function in SyncThru™ Web Service (Settings tab >
Machine Settings > System > Eco > Settings) or 6DPVXQJ(DV\
3ULQWHU0DQDJHU(Device Settings > Eco).
Default Eco: The machine is set to Default Eco mode.
Custom Eco: Change any necessary values.
Press OK to save the selection.
2. Menu Overview and Basic Setup
48
Basic printing
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see the eco image (
means the eco mode is currently enabled.
•
), that
The actual amount displayed is only an estimate as the actual amount may
differ depending on the operating system used, computing performance,
application software, connection method, media type [thickness], media
size, job complexity, etc.
Eco options
•
Printer Default: Follows the settings from the machine's control panel.
•
None: Disables Eco mode.
•
Eco Printing: Enables eco mode. Activate the various Eco items you want to
use.
•
Password: If the administrator fixed to enable the Eco mode, you have to
enter the password to change the status.
Result simulator
Result Simulator shows the results of reduced emission of carbon dioxide, used
electricity, and the amount of saved paper in accordance with the settings you
selected.
•
The results are calculated on the basis that the total number of printed
paper is one hundred without a blank page when the Eco mode is disabled.
•
Refers to the calculation coefficient about CO2, energy, and paper from IEA,
the index of Ministry of Internal Affairs and Communication of Japan and
www.remanufacturing.org.uk. Each model has a different index.
•
The power consumption in printing mode refers to the average printing
power consumption of this machine.
2. Menu Overview and Basic Setup
49
Using USB memory device
Insert a USB memory device into the USB memory port on your machine.
CLP-68xND Series/ CLP-68xDW Series only.
12
About USB memory device
USB memory devices are available with a variety of memory capacities to give
you more room for storing documents, presentations, music and videos, high
resolution photographs, or whatever other files you want to store or move.
Your machine supports USB memory devices with FAT16/FAT32 and sector size
of 512 bytes.
Check your USB memory device’s file system from your dealer.
You must use only an authorized USB memory device with an A plug type
connector.
• Do not remove the USB memory device while it is in use. The machine
warranty does not cover damage caused by user’s misuse.
• If your USB memory device has certain features such as security settings
and password settings, your machine may not automatically detect it.
For details about these features, see the user’s guide of the USB memory
device.
Use only a USB memory device with metal-shielded connector.
2. Menu Overview and Basic Setup
50
Using USB memory device
13
Printing from a USB memory device
Press the arrow until the folder or file you want and press OK.
If you see [+] or [D] in the front of a folder name, there are one or more files
or folders in the selected folder.
You can directly print files stored on a USB memory device.
Direct Print option supported file types:
•
PRN: Only files created by provided driver with your machine are
compatible.
If you print PRN files created from other machine, the printout would be
different.
Press the number of copies to be printed or enter the number.
Press OK.
14
Managing USB memory
•
BMP: BMP Uncompressed
•
TIFF: TIFF 6.0 Baseline
•
JPEG: JPEG Baseline
•
PDF: PDF 1.4 and below
•
XPS
To print a document from a USB memory device:
Insert a USB memory device into the USB memory port on your machine.
Select
(Menu) button on the control panel.
You can delete image files stored on a USB memory device one by one or all at
once by reformatting the device.
Insert a USB memory device into the USB memory port on your machine.
Select
(Menu) button on the control panel.
Press Direct USB > File Manage.
Press the arrow until Delete or Format you want and press OK.
Press the folder or file you want and press OK.
Press Direct USB > USB Print.
2. Menu Overview and Basic Setup
51
Using USB memory device
16
If you see [+] or [D] in the front of a folder name, there are one or more files
or folders in the selected folder.
Backing up data
Data in the machine’s memory can be accidentally erased due to power failure
To delete or format, press Yes > OK.
or storage failureUGBackup helps you protect your the system settings by storing
them as backup files on a USB memory device.
After deleting files or reformatting a USB memory device, files cannot be
restored. Therefore, confirm that you no longer need the data before
deleting it.
Backing up data
15
Viewing the USB Memory Status
You can check the amount of memory space available for saving documents.
Insert a USB memory device into the USB memory port on your machine.
Select
Insert a USB memory device into the USB memory port on your machine.
Select
(Menu) button on the control panel.
Press System Setup.
Press the arrow until Export Setting you want and press OK.
Press Setup Data > OK.
The data is backed up to the USB memory device.
(Menu) button on the control panel.
Press Direct USB > Check Space.
The available memory space appears on the display.
Restoring data
Insert a USB memory device into the USB memory port on your machine.
Select
(Menu) button on the control panel.
2. Menu Overview and Basic Setup
52
Using USB memory device
Press System Setup.
Press the arrow until Import Setting you want and press OK.
Press Setup Data > OK.
To restore the backup file to the machine, press Yes > OK.
2. Menu Overview and Basic Setup
53
3. Maintenance
This chapter provides information about purchasing supplies, accessories and maintenance parts available for your
machine.
• Ordering supplies and accessories
55
• Available consumables
56
• Available maintenance parts
59
• Storing the toner cartridge
60
• Redistributing toner
62
• Replacing the toner cartridge
64
• Replacing the waste toner container
68
• Installing accessories
69
• Monitoring the supplies life
73
• Setting the toner low alert
74
• Cleaning the machine
75
• Tips for moving & storing your machine
79
Ordering supplies and accessories
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and maintenance parts.
To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine.
You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service.
3. Maintenance
55
Available consumables
When supplies reach the end of their life spans, you can order the followings of consumables for your machine:
Type
Toner cartridge
Average yielda
Model
Part name
• CLP-41xN Series
• Average continuous black cartridge yield: Approx.G2,500 standard pages (Black) • CLT-K504S: Black
• CLP-41xNW Series
• Average continuous color cartridge yield: Approx.G1,800 standard pages
(Yellow/Magenta/Cyan)
• CLT-Y504S: Yellow
• CLT-M504S: Magenta
• CLT-C504S: Cyan
• CLP-68xND Series
• Average continuous black cartridge yield: Approx.G2,000 standard pages (Black) • CLT-K506S: Black
• CLP-68xDW Series
• Average continuous color cartridge yield: Approx.G1,500 standard pages
(Yellow/Magenta/Cyan)
• CLT-Y506S: Yellow
• CLT-M506S: Magenta
• CLT-C506S: Cyan
• Average continuous black cartridge yield: Approx.G6,000 standard pages (Black) • CLT-K506L: Black
• Average continuous color cartridge yield: Approx.G3,500 standard pages
(Yellow/Magenta/Cyan)
• CLT-Y506L: Yellow
• CLT-M506L: Magenta
• CLT-C506L: Cyan
Waste toner container • CLP-41xN Series
Approx. 12,000 imagesb
CLT-W504
• CLP-41xNW Series
• CLP-68xND Series
CLT-W506
• CLP-68xDW Series
a. Declared yield value in accordance with ISO/IEC 19798. The number of pages may be affected by operating environment, printing interval, graphics, media type and media size.
b. Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
3. Maintenance
56
Available consumables
Depending on the options, percentage of image area and job mode used,
the toner cartridge’s lifespan may differ.
When purchasing new toner cartridges or other consumables, these must
be purchased in the same country as the machine you are using. Otherwise,
new toner cartridges or other consumables will be incompatible with your
machine due to different configurations of toner cartridges and other
consumables according to the specific country conditions.
Samsung does not recommend using non-genuine Samsung toner
cartridge such as refilled or remanufactured toner. Samsung cannot
guarantee non-genuine Samsung toner cartridge's quality. Service or repair
required as a result of using non-genuine Samsung toner cartridges will not
be covered under the machine’s warranty.
3. Maintenance
57
Available accessories
You can purchase and install accessories to enhance your machine’s performance and capacity.
Some features and optional goods may not be available depending on models or countries (see "Features by models" on page 7).
Accessory
Memory module
Function
Part name
Extends your machine’s memory capacity.
ML-MEM370: 512 MB
Allows you to use various interface.
ML-PAR100
• When installing the printer driver with an IEEE1284 parallel
connector, the machine might not be found and after
installing the printer driver, only basic printing features are
available.
IEEE 1284 parallel
connectora
• If you want to check the machine's status or set the settings,
connect the machine to a computer with a USB cable or a
network.
• If you use the IEEE 1284 parallel connector, you can not use
the USB cable.
Optional traya
If you are experiencing frequent paper supply problems, you can
CLP-S680A
attach an additional 500 bsheets tray.
a. CLP-68xND Series/CLP-68xDW Series only.
b. Plain paper 80 g/m2 (20 lb bond).
3. Maintenance
58
Available maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service
provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its
“Average yield”.
Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which
is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met.
Average yielda
Parts
• CLP-41xN Series
• CLP-68xND Series
• CLP-41xNW Series
• CLP-68xDW Series
Transfer roller
Approx. 100,000 pages
Approx. 100,000 pages
Fuser Unit
Approx. 50,000 pages
Approx. 100,000 pages
Pick-Up roller
Approx. 200,000 pages
Approx. 300,000 pages
Retard roller
Approx. 100,000 pages
Approx. 100,000 pages
Intermediate Transfer Belt (ITB)
Approx. 100,000 pages
Approx. 100,000 pages
a. It will be affected by the operating system used, computing performance, application software, connecting method, media, media size and
job complexity.
3. Maintenance
59
Storing the toner cartridge
Toner cartridges contain components that are sensitive to light, temperature
and humidity. Samsung suggests users follow these recommendations to
ensure optimal performance, highest quality, and longest life from your new
Samsung toner cartridge.
Store this cartridge in the same environment in which the printer will be used.
This should be in controlled temperature and humidity conditions. The toner
cartridge should remain in its original and unopened package until installation
– if original packaging is not available, cover the top opening of the cartridge
with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful shelf
and operating life. Do not store on the floor. If the toner cartridge is removed
from the printer, follow the instructions below to store the toner cartridge
properly.
•
Store the cartridge inside the protective bag from the original package.
•
Store lying flat (not standing on end) with the same side facing up as if it
were installed in the machine.
•
Do not store consumables in any of the following conditions:
Temperature greater than 40°C (104°F).
Humidity range less than 20% or greater than 80%.
An environment with extreme changes in humidity or temperature.
Direct sunlight or room light.
Dusty places.
A car for a long period of time.
An environment where corrosive gases are present.
An environment with salty air.
Handling instructions
•
Do not touch the surface of the photoconductive drum in the cartridge.
•
Do not expose the cartridge to unnecessary vibrations or shock.
•
Never manually rotate the drum, especially in the reverse direction; this can
cause internal damage and toner spillage.
Toner cartridge usage
Samsung Electronics does not recommend or approve the use of non-Samsung
brand toner cartridges in your printer including generic, store brand, refilled, or
remanufactured toner cartridges.
Samsung’s printer warranty does not cover damage to the machine caused
by the use of a refilled, remanufactured, or non-Samsung brand toner
cartridges.
3. Maintenance
60
Storing the toner cartridge
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the
amount of toner that print jobs require. The actual print yield may vary
depending on the print density of the pages you print on, operating
environment, percentage of image area, printing interval, media type and/or
media size. For example, if you print a lot of graphics, the consumption of the
toner is higher and you may need to change the cartridge more often.
3. Maintenance
61
Redistributing toner
When the toner cartridge is near the end of its life:
•
White streaks or light printing occurs and/or density variation side to side.
•
The Status LED blinks red. The toner-related message saying that the toner is low may appear on the display.
•
The computers’s Samsung Printing Status program window appears on the computer telling you which color cartridge is low on tonerG(see "Using Samsung
Printer Status" on page 235).
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still
occur even after you have redistributed the toner. Check the type of the toner cartridge for your machineG(see "Available consumables" on page 56).
Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 17).
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
3. Maintenance
62
Redistributing toner
5~6
3. Maintenance
63
Replacing the toner cartridge
For CLP-41xN Series/CLP-41xNW Series:
Click this link to open an animation about replacing a toner cartridge.
For CLP-68xND Series/CLP-68xDW Series:
Click this link to open an animation about replacing a toner cartridge.
The machine uses four colors and has a different toner cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K).
•
The status LED and the toner-related message on the display indicate when each individual toner cartridges should be replaced.
•
The computers’s Samsung Printing Status program window appears on the computer telling you which color cartridge is empty on tonerG(see "Using Samsung
Printer Status" on page 235).
Check the type of the toner cartridge for your machineG(see "Available consumables" on page 56).
• Shake the toner cartridge thoroughly, it will increase the initial print quality.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 17).
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
3. Maintenance
64
Replacing the toner cartridge
3. Maintenance
65

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Print high-res
Author                          : Mia
Create Date                     : 2012:04:19 18:21:35-04:00
Modify Date                     : 2012:04:19 18:22:07-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2012:04:19 18:22:07-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Rousseau_Klimt_english1.pdf
Creator                         : Mia
Document ID                     : uuid:b864e15a-81b1-4d2c-8946-cef961461445
Instance ID                     : uuid:57a52678-6a6f-43c3-99af-d9c84ec1c226
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 28

EXIF Metadata provided by EXIF.tools