Samsung Electronics Co SLM2875FW Mono Laser Multifuction Printer User Manual BatianN english

Samsung Electronics Co Ltd Mono Laser Multifuction Printer BatianN english

Users Manual 4

ADVANCEDUser’s GuideADVANCEDUser’s GuideThis guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries.BASICThis guide provides information concerning the installation, basic operation and troubleshooting on Windows.
149ADVANCED1. Software InstallationInstallation for Mac 152Reinstallation for Mac 153Installation for Linux 154Reinstallation for Linux 1552. Useful Setting MenusBefore you begin reading a chapter 157Print menu 158Copy menu 160Fax menu 163System setup 1663. Using a Network-Connected MachineUseful network programs 174Wired network setup 175Installing driver over the network 179IPv6 configuration 188Wireless network setup 191Samsung MobilePrint 222AirPrint 223Google Cloud Print™ 2254. Special FeaturesAltitude adjustment 229Entering various characters 230Setting up the fax address book 232Printing features 235Scan features 250Fax features 259
150ADVANCED5. Useful Management ToolsAccessing management tools 269Easy Capture Manager 270Samsung AnyWeb Print 271Easy Eco Driver 272Using SyncThru™ Web Service 273Using Samsung Easy Document Creator 276Using Samsung Easy Printer Manager 282Using Samsung Printer Status 285Using Samsung Printer Experience 287Using the Linux Unified Driver Configurator 2936. TroubleshootingPaper feeding problems 298Power and cable connecting problems 299Printing problems 300Printing quality problems 304Copying problems 312Scanning problems 313Faxing problems 315Operating system problems 317
1. Software InstallationThis chapter provides instructions for installing essential and helpful software for use in an environment where the machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 179).• Installation for Mac 152• Reinstallation for Mac 153• Installation for Linux 154• Reinstallation for Linux 155 • If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see "Installing the driver locally" on page 28).• Only use a USB cable no longer then 3 meter (118 inches).
1521. Software InstallationInstallation for Mac1Make sure that the machine is connected to your computer and powered on.2 Insert the supplied software CD into your CD-ROM drive.3 Double-click the CD-ROM icon that appears on your Mac desktop.• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.4 Double-click the MAC_Installer folder > Installer OS X icon.5 Click Continue.6 Read the license agreement and click Continue.7 Click Agree to agree to the license agreement.8 Click Install. All components necessary for machine operations will be installed.If you click Customize, you can choose individual components to install.9 Enter the password and click OK.10 Select Direct Connection using USB cable on the Printer Connection Type and click Continue.11 Click Add Printer button to select your printer and add it to your printer list.If your machine supports fax, click Add Fax button to select your fax and add it to your fax list12 After the installation is finished, click Close.
1531. Software InstallationReinstallation for MacIf the printer driver does not work properly, uninstall the driver and reinstall it.1Open the Applications folder > Samsung > Printer Software Uninstaller.2 To uninstall printer software, click Continue.3 Check the program you want to delete and click Uninstall.4 Enter the password and click OK.5 After the uninstallation is finished, click Close. If a machine has already been added, delete it from the Print Setup Utility or Print & Fax.
1541. Software InstallationInstallation for LinuxYou need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads).1 Installing the Unified Linux Driver1Make sure that the machine is connected to your computer and powered on.2 When the Administrator Login window appears, type “root” in the Login field and enter the system password. You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator. 3 From the Samsung website, download the Unified Linux Driver package to your computer.4 Right-click the Unified Linux Driver package and extract the package. 5 Double click cdroot > autorun.6 When the welcome screen appears, click Next.7 When the installation is complete, click Finish.The installation program added the Unified Driver Configurator desktop icon and the Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the on-screen help that is available through your system menu or from the driver package Windows applications, such as Unified Driver Configurator or Image Manager.
1551. Software InstallationReinstallation for LinuxIf the printer driver does not work properly, uninstall the driver and reinstall it. 1Make sure that the machine is connected to your computer and powered on.2 When the Administrator Login window appears, type “root” in the Login field and enter the system password.You must log in as a super user (root) to uninstall the printer driver. If you are not a super user, ask your system administrator.3 Open the Terminal program. When the Terminal screen appears, type in the following.[root@localhost root]#cd /opt/Samsung/mfp/uninstall/[root@localhost uninstall]#./uninstall.sh4 Click Next. 5 Click Finish.
2. Useful Setting MenusThis chapter explains how to browse the current status of your machine, and the method of setting for advanced machine setup. • Before you begin reading a chapter 157• Print menu 158• Copy menu 160• Fax menu 163• System setup 166
1572. Useful Setting MenusBefore you begin reading a chapterThis chapter explains all the features available for this series' models to help users easily understand the features.You can check the features available for each model in the Basic Guide (see "Menu overview" on page 33).The following are tips for using this chapter• The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing (Menu).• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.• For models that do not have the (Menu) on the control panel, this feature is not applicable (see "Control panel overview" on page 24).• Some menu names may differ from your machine depending on its options or the models.
1582. Useful Setting MenusPrint menu Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (Menu) > Print Setup on the control panel.Item DescriptionOrientationSelects the direction in which information is printed on a page.•Portrait•LandscapeDuplexaYou can set the machine to print copies on both sides of paper.•Off: Prints in normal mode.•Short Edge•Long EdgeCopies You can enter the number of copies using the number keypad.ResolutionSpecifies the number of dots printed per inch (dpi). The higher the setting, the sharper printed characters and graphics.Clear Text Prints text darker than on a normal document.Auto CR Allows you to append the required carriage return to each line feed, which is useful for Unix or DOS users.SkipBlankPagesThe printer detects the pritning data from computer whether a page is empty or not. You can set to skip the blank pages.Item Description253
Print menu1592. Useful Setting MenusEmulation Sets the emulation type and option.a. M287xND/M287xFD/M287xFW/M287xHN only.Item Description
1602. Useful Setting MenusCopy menu1 Copy feature Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (copy) > (Menu) > Copy Feature on the control panel.Item DescriptionOriginal Size Sets the image size.Reduce/EnlargeReduces or enlarges the size of a copied image (see "Reduced or enlarged copy" on page 63). If the machine is set Eco mode, reduce and enlarge features are not available. DuplexaYou can set the machine to print copies on both sides of paper.•1 Sided: Scans one side of an original and prints it on one side of the paper.•1->2Sided•1->2Sided RotatedDarknessAdjusts the brightness level to make a copy that is easier to read, when the original contains faint markings and dark images (see "Darkness" on page 62)Original Type Improves the copy quality by selecting the document type for the current copy job (see "Original" on page 62)Item Description
Copy menu1612. Useful Setting MenusCollationSet the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3 page document will print followed by a second complete document. •On: Prints output in sets to match the sequence of originals.•Off: Prints output sorted into stacks of individual pages.Layout Adjusts the layout format such as ID copy, 2/4-up, and booklet.Item DescriptionAdjust Bkgd.Prints an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background, such as a newspaper or a catalog.•Off: Does not use this feature.•Auto: Optimizes the background.•Enhance Lev.1~2: The higher the number is, the more vivid the background is.•Erase Lev.1~4: The higher the number is, the lighter the background is.a. M287xND/M287xFD/M287xFW/M287xHN only.Item Description
Copy menu1622. Useful Setting Menus2 Copy Setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:Press (copy) > (Menu) > Copy Setup on the control panel.Item DescriptionChange Default Resets the value or setting to the printer’s out-of-box state.
1632. Useful Setting MenusFax menu3 Fax Feature • Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33).• Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). To change the menu options:• Press (fax) > (Menu)> Fax Feature on the control panel.Item DescriptionDarknessAdjusts the brightness level to scan an original that is easier to read, when the original contains faint markings and dark images (see "Darkness" on page 70).ResolutionThe default document settings procedure good results when using typical text-based originals. However, if you send originals that are of poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax (see "Resolution" on page 69).Original Size Sets the image size.Multi SendSends a fax to multiple destinations (see "Sending a fax to multiple destinations" on page 68). You cannot send a color fax using this feature. Delay SendSets your machine to send a fax at a later time when you will not be present (see "Delaying a fax transmission" on page 261). You cannot send a color fax using this feature. Priority SendScans the original into memory and immediately transmits it when the current operation is finished. Priority transmission will interrupt a sending to multiple destinations between stations (example, when the transmission to station A ends, before transmission to station B begins) or between redial attempts (see "Sending a priority fax" on page 262).Send Forward/ Rcv. ForwardForwards the received or sent fax to other destination by a fax or PC. If you are out of office but have to receive the fax, this feature may be useful.• See "Forwarding a sent fax to another destination" on page 262.• See "Forwarding a received fax" on page 263.Item Description
Fax menu1642. Useful Setting Menus4 Sending setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.Secure ReceiveStores the received fax in memory without printing out. To print received documents, you need to enter the password. You can prevent your received faxes from being accessed by unauthorized people (see "Receiving in secure receiving mode" on page 266).Add PageAdds additional documents to a reserved delay fax job (see "Adding documents to a reserved fax" on page 261).Cancel Job Cancels the delayed fax job which is saved in memory (see "Canceling a reserved fax job" on page 262).Item DescriptionItem DescriptionRedial Times Sets the number of redial attempts. If you enter 0, the machine will not redial.Redial Term Sets the time interval before automatic redialling. Prefix DialSets a prefix of up to five digits. This number dials before any automatic dial number is started. It is useful for accessing a PABX exchange.ECM ModeSends faxes using error correction mode (ECM) to makes sure the faxes are sent smoothly without any error. It may take more time.Fax Confirm.Sets the machine to print a report whether a fax transmission was successfully completed or not. If you select On-Error, the machine prints a report only when a transmission is not successful.Image TCR Prints a transmission report with a minimized image of the first page of the fax sent. Dial ModeSets the dialing mode to either tone or pulse. This setting may not be available depending on your country.
Fax menu1652. Useful Setting Menus5 Receiving setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.Item DescriptionReceive Mode Selects the default fax receiving mode.Ring to Answer Specifies the number of times the machine rings before answering an incoming call.Stamp Rcv NameAutomatically prints the page number, and the date and time of reception at the bottom of each page of a received fax.Rcv Start CodeInitiates fax reception from an extension phone plugged into the EXT socket on the back of the machine. If you pick up the extension phone and hear fax tones, enter the code. It is preset to *9* at the factory.Auto Reduction Automatically reduces an incoming fax page to fit the size of the paper loaded in the machine.Discard Size Discards a specific length from the end of the received fax.Junk Fax SetupBlocks any unwanted faxes that you stored in the memory as junk fax numbers. This setting may not be available depending on your country.DRPD Mode Enables a user to use a single telephone line to answer several different telephone numbers. You can set the machine to recognize different ring patterns for each number. This setting may not be available depending on your country (see "Receiving faxes using DRPD mode" on page 265).Duplex PrintaPrints the received fax data on both sides of the paper. You can save the paper usage.Change Default Resets the value or setting to the printer’s out-of-box state.Manual TX/RX Setting this option to ON provides the ability to send or receive a fax while the line is busy. You can select to send or receive a fax by either picking up the extension phone receiver and pressing the Start button or by pressing the (On Hook Dial) button and pressing the Start button.a. M287xFD/M287xFW/M287xHN only.Item Description
1662. Useful Setting MenusSystem setup6 Machine setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (Menu) > System Setup > Machine Setup on the control panel.Item DescriptionMachine ID Sets the machine ID which will be printed at the top of each fax page that you send.Fax Number Sets the fax number which will be printed at the top of each fax page that you send.Date & Time Sets the date and time.Clock Mode Selects the format for displaying time between 12 hr. and 24 hr. Language Sets the language of the text that appears on the control panel display.Default Mode Sets the machine’s default mode among fax mode and copy mode.PowerSaveSets how long the machine waits before going to power save mode.When the machine does not receive data for an extended period of time, power consumption is automatically lowered. Auto Power OffTurns power off automatically when the machine has been in power save mode for the length of time set in Auto Power Off > On > Timeout. • This option only appears in the M267xN/M287xND.• To turn the machine on again, press the (Power/Wakeup) button on the control panel (make sure the main power switch is on).• If you run the printer driver or Samsung Easy Printer Manager, the time automatically extends.• While the machine is connected to the network or working on a print job, Auto Power Off feature doesn't work. Item Description
System setup1672. Useful Setting MenusWakeup EventYou can set the condition to wake up from power-save mode.•On: GThe machine wake up from the power save mode on the following cases:- Pressing any button- Opening or closing the paper tray- Inserting paper in the document feeder•Off: The machine wake up from the power save mode only when the Power/Wakeup button is pressed.System TimeoutSets the time that the machine remembers previously used copy settings. After the timeout, the machine restores the default copy settings.Job TimeoutSets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page.Altitude Adj. Optimize print quality according to the machine’s altitude.Item DescriptionAuto ContinueDetermine whether or not the machine continues printing when it detects the paper does not match the paper settings.•0 Sec: This option allows you to continue printing when the paper size you have set is mismatched with the paper in the tray.•30 Sec: If a paper mismatch occurs, an error message will display. The machine waits for about 30 second, then automatically clear the message and continue printing. •Off: If a paper mismatch occurs, the machine waits until you insert the correct paper. Paper Substit.Automatically substitutes the printer driver’s paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa.Toner SaveActivating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality.Item Description
System setup1682. Useful Setting Menus7 Paper setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (Menu) > System Setup > Paper Setup on the control panel.8 Sound / Volume Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). Eco SettingsAllows you to save print resources and enables eco-friendly printing. •Default Mode: Select whether to turn the Eco mode on or off. On force (On-Forced): Sets the Eco mode on with password. If a user wants to turn the Eco mode on/off, the user needs to enter the password. •Select Temp.: Selects the eco template set from the SyncThru™ Web Service.Item DescriptionItem DescriptionPaper Size Sets the paper size as A4, Letter, or other paper sizes, according to your requirements.Paper Type Chooses the type of the paper for each tray.Paper Source Selects from which tray the paper is used.Margin Sets the margins for the document.
System setup1692. Useful Setting MenusTo change the menu options:• Press (Menu) > System Setup > Sound on the control panel.9 Report Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (Menu) > System Setup > Report on the control panel.Item DescriptionKey Sound Turns the key sound on orGoff. With this option set to on, a tone sounds each time a key is pressed.Alarm SoundTurns the alarm sound on orGoff. With this option set to on, an alarm tone sounds when an error occurs or fax communication ends.SpeakerTurns on or off the sounds from the telephone line through the speaker, such as a dial tone or a fax tone. With this option set to Comm. which means the speaker is on until the remote machine answers. You can adjust the volume level using (On Hook Dial). You can adjust the speaker volume only when the telephone line is connected.a Press (fax) on the control panel.b Press (On Hook Dial). A dial tone sounds from the speaker.c Press the arrows until you hear the volume you want.d Press (On Hook Dial) to save the change and return to ready mode. Ringer Adjusts the ringer volume. For the ringer volume, you can select off, low, middle, and high level.Item DescriptionConfiguration Prints a report on the machine's overall configuration.Demo Page Prints the demo page to check whether your machine is printing properly or not.Network Conf. Prints information on your machine’s network connection and configuration.Supplies Info. Prints supplies’ information page. Item Description
System setup1702. Useful Setting Menus10 Maintenance Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). To change the menu options:• Press (Menu) > System Setup > Maintenance on the control panel.Usage Counter Prints a usage page. The usage page contains the total number of pages printed.Fax Received Prints information on the faxes you have recently received.Fax Sent Prints information on the faxes you have recently sent.Scheduled JobsPrints the document list currently stored for delayed faxes along with the starting time and type of each operation.Fax Confirm. Sets the machine to print a report whether a fax transmission was successfully completed or not. JunkFax Prints the fax numbers specified as junk fax numbers.PCL FontGList Prints the PCL font list.Address Book Prints all of the email addresses currently stored in the machine’s memory.Item DescriptionItem DescriptionCLR Empty Msg. When toner cartridge is empty, this option appears. You can clear the empty message.Supplies Life Shows the supply life indicators (see "Monitoring the supplies life" on page 87.)Image Mgr.Allows you to adjust the color setting such as contrast level, color registration, color density, etc.•Custom Color: adjusts contrast, color by color.-Default: optimizes colors automatically.-Print Density: allows you to manually adjust the color contrast for each cartridge. It is recommended to use the Default setting for best color quality.
System setup1712. Useful Setting Menus11 Network setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 33). • Press (Menu)> Network on the control panel,TonerLow Alert Customizes the level to alert toner low or toner empty (see "Setting the toner low alert" on page 88).ImgU.Low AlertAllows you to set the alarm for when the imaging unit is low. M2675/M2676/M2875/M2876 series only. Serial NumberShows the machine’s serial number. When you call for service or register as a user on the Samsung website, you can find this.Item DescriptionOption DescriptionTCP/IP (IPv4)Selects the appropriate protocol and configure parameters to use the network environment. There are lots of parameters to be set. If you are not sure, leave as is, or consult the network administrator. TCP/IP (IPv6) Selects this option to use the network environment through IPv6 (see "IPv6 configuration" on page 188).Ethernet Speed Configure the network transmission speed.Wireless Selects this option to use the wireless network.
System setup1722. Useful Setting MenusProtocol Mgr.You can activate or deactivate the following protocols.•Net. Activate: : You can set whether to use Ethernet on or off. •Http Activate: You can sets whether to use SyncThru™ Web Service or not.•WINS: You can configure the WINS server. WINS(Windows Internet Name Service) is used in the Windows operating system.•SNMP V1/V2: You have to enable this option to use SNMP V1/V2 protocol. Administrator’s can use SNMP to monitor and manage machines on the network.•UPnP(SSDP): You have to enable this option to use UPnP(SSDP) protocol. Turn the power off and on after you change above options. Option DescriptionProtocol Mgr. Ocontinued.)•MDNS: You have to enable this option to use MDNS (Multicast Domain Name System) protocol.•SetIP: You have to enable this option to use SetIP protocol.•SLP: You can configure SLP (Service Location Protocol) settings. This protocol allows host applications to find services in a local area network without prior configuration. Turn the power off and on after you change this option.Network Conf. This list shows information on your machine’s network connection and configuration.Clear Setting Reverts the network settings to the default values. (Reboot required.)Option Description
3. Using a Network-Connected MachineThis chapter gives you step-by-step instructions for setting up a network connected machine and software.• Useful network programs 174• Wired network setup 175• Installing driver over the network 179• IPv6 configuration 188• Wireless network setup 191• Samsung MobilePrint 222• AirPrint 223• Google Cloud Print™ 225 Supported optional devices and features may differ according to your model (see "Features by models" on page 7).
1743. Using a Network-Connected MachineUseful network programsThere are several programs available to setup the network settings easily in a network environment. For the network administrator especially, managing several machines on the network is possible. • Before using the programs below, set the IP address first. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). 1 SyncThru™ Web ServiceThe web server embedded on your network machine allows you to do the following tasks (see "Using SyncThru™ Web Service" on page 273).• Check the supplies information and status.• Customize machine settings.• Set the email notification option. When you set this option, the machine status (toner cartridge shortage or machine error) will be sent to a certain person's email automatically.• Configure the network parameters necessary for the machine to connect to various network environments.2 SyncThru™ Web Admin ServiceWeb-based machine management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. • Download this program from http://solution.samsungprinter.com.3 SetIP wired network setupThis utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol.• See "IPv4 configuration using SetIP (Windows)" on page 175.• See "IPv4 configuration using SetIP (Mac)" on page 176.• See "IPv4 configuration using SetIP (Linux)" on page 177. • The machine that does not support the network port, it will not be able to use this feature (see "Rear view" on page 23).• TCP/IPv6 is not supported by this program.
1753. Using a Network-Connected MachineWired network setup4 Printing a network configuration reportYou can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network. • Accessing menus may differ from model to model (see "Accessing the menu" on page 33).• It may be necessary to press OK to navigate to lower-level menus for some models. •The machine has the display screen: Press the (Menu) button on the control panel and select Network > Network Conf.Using this Network Configuration Report, you can find your machine’s MAC address and IP address.For example:• MAC Address: 00:15:99:41:A2:78• IP Address: 169.254.192.1925 Setting IP address • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 23).• TCP/IPv6 is not supported by this program. First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.IPv4 configuration using SetIP (Windows)Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall.1Install this program from the supplied CD-ROM by double-click Application > SetIP > Setup.exe.2 Follow the instructions in the installation window.
Wired network setup1763. Using a Network-Connected Machine3 Connect your machine to the network with a network cable.4 Turn on the machine.5 From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP.6 Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.7 Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 175) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 8 Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct.IPv4 configuration using SetIP (Mac)Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may vary from your model. 1Connect your machine to the network with a network cable.2 Insert the supplied software CD into your CD-ROM drive.
Wired network setup1773. Using a Network-Connected Machine3 Double-click the CD-ROM icon that appears on your Mac desktop.• For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.4 Double-click the MAC_Installer folder > Installer OS X icon.5 Click Continue.6 Read the license agreement and click Continue.7 Click Agree to agree to the license agreement.8 Click Install. All components necessary for machine operations will be installed.If you click Customize, you can choose individual components to install.9 Enter the password and click OK.10 Select Network connection on the Printer Connection Type and click Set IP Address button.11 Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.12 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 175) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 13 Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct.IPv4 configuration using SetIP (Linux)Before using the SetIP program, disable the computer firewall from System Preferences or Administrator. The following instructions may vary from your model or operating systems. 1Open /opt/Samsung/mfp/share/utils/.2 Double-click the SetIPApplet.html file. 3 Click to open the TCP/IP configuration window. 4 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding.
Wired network setup1783. Using a Network-Connected Machine Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 175) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 5 The machine will automatically print the Network Configuration Report.
1793. Using a Network-Connected MachineInstalling driver over the network • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7).• The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 23).• You can install the printer driver and software when you insert the software CD into your CD-ROM drive.For Windows, select the printer driver and software in the Select Software to Install window.
Installing driver over the network1803. Using a Network-Connected Machine6 Windows1Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 175).2 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.3 Read and accept The software End User License Agreement and Using Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next.4 Select Network connection on the Printer Connection Type screen.5 If the Connected Device window appears, check that the machine is connected to your network. Then, click Next. The firewall software might be blocking network communication. efore connecting the device to the network, disable the computer’s firewall. 6 The searched machines will be shown on the screen. Select the one you wish to use and click OK.7 Follow the instructions in the installation window.
Installing driver over the network1813. Using a Network-Connected MachineFrom the Windows 8 Start Screen •Samsung Printer Experience app can only be used in the Start screen when V4 driver is installed. The V4 driver is automatically downloaded from the Windows Update if your computer is connected to the Internet. If not, you can manually download the V4 driver from Samsung website, www.samsung.com > find your product > Support or downloads. •You can download Samsung Printer Experience app from the Windows Store. You need have a Microsoft account to use the Windows Store.a From Charms, select Search. b Click Store.c Search and click Samsung Printer Experience.d Click Install.• If you install the driver using the supplied software CD, V4 driver is not installed. If you want to use the V4 driver in the Desktop screen, you can download from the Samsung website, www.samsung.com >find your product > Support or downloads.• If you want to install Samsung’s printer management tools, you need to install them using the supplied software CD. 1Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 175). 2 From Charms, select Settings > Change PC settings > Devices.3 Click Add a device. Discovered machines will be shown on the screen. 4 Click the model name or host name you wish to use. You can print a Network Configuration Report from the machine’s control panel that will show the current machine’s host name (see "Printing a network configuration report" on page 213). 5 The driver is automatically installed from the Windows Update. Silent installation ModeSilent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window.Command-line ParametersFollowing table shows commands that can be used in the command window. Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely.
Installing driver over the network1823. Using a Network-Connected MachineCommand- line Definition Description/s or/SStarts silent installation. Installs machine drivers without prompting any UIs or user intervention./p”<port name>” or/P”<port name>”Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name.For example:• /p”xxx.xxx.xxx.xxx” in where, “xxx.xxx.xxx.xxx” means IP address for network printer. /p”USB001”, /P”LPT1:”, /p”hostname”/a”<dest_path>” or/A”<dest_path>”Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software./n”<Printer name>” or/N”<Printer name>”Specifies printer name. Printer instance shall be created as specified printer name.With this parameter, you can add printer instances as your wishes./nd or/NDCommands not to set the installed driver as a default machine driver.It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won’t be applied because Windows OS will set installed printer driver as a default machine driver./x or/XUses existing machine driver files to create printer instance if it is already installed.This command provides a way to install a printer instance that uses installed printer driver files without installing an additional driver.Command- line Definition Description
Installing driver over the network1833. Using a Network-Connected Machine7 Mac1Make sure that the machine is connected to your network and powered on.2 Insert the supplied software CD into your CD-ROM drive.3 Double-click the CD-ROM icon that appears on your Mac desktop.• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.4 Double-click the MAC_Installer folder > Installer OS X icon.5 Click Continue.6 Read the license agreement and click Continue.7 Click Agree to agree to the license agreement.8 Click Install. All components necessary for machine operations will be installed.If you click Customize, you can choose individual components to install./up”<printer name>” or/UP”<printer name>”Removes only specified printer instance and not the driver files.This command provides a way to remove only specified printer instance from your system without effecting other printer drivers. It will not remove printer driver files from your system./d or/DUninstalls all device drivers and applications from your system.This command will remove all installed device drivers and application software from your system./v”<share name>” or/V”<share name>”Shares installed machine and add other available platform drivers for Point & Print.It will install all supported Windows OS platform’s machine drivers to system and share it with specified <share name> for point and print./o or /OOpens Printers and Faxes folder after installation.This command will open Printers and Faxes folder after the silent installation./h, /H or /? Shows Command-line Usage.Command- line Definition Description
Installing driver over the network1843. Using a Network-Connected Machine9 Enter the password and click OK.10 Select Network connection on the Printer Connection Type and click Continue.11 Click Add Printer button to select your printer and add it to your printer list.12 Click IP and select HP Jetdirect - Socket in Protocol.13 Enter the machine’s IP address in the Address input field.14 Enter the queue name in the Queue input field. If you cannot determine the queue name for your machine server, try using the default queue first.15 If Auto Select does not work properly, choose Select Printer Software and your machine name in Print Using.16 Click Add.17 After the installation is finished, click Close.8 LinuxYou need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads).Install the Linux driver and add network printer1Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set. 2 Download the Unified Linux Driver package from the Samsung website.3 Extract the UnifiedLinuxDriver.tar.gz file and open the new directory.4 Double-click the cdroot > autorun.5 The Samsung installer window opens. Click Next.6 The add printer wizard window opens. Click Next.7 Select network printer and click Search button.8 The machine’s IP address and model name appears on list field.9 Select your machine and click Next.10 Input the printer description and Next.11 After the machine is added, click Finish.12 When installation is done, click Finish.
Installing driver over the network1853. Using a Network-Connected MachineAdd a network printer1Double-click the Unified Driver Configurator.2 Click Add Printer.3 The Add printer wizard window opens. Click Next.4 Select Network printer and click the Search button.5 The printer’s IP address and model name appears on list field.6 Select your machine and click Next.7 Enter the printer description and click Next.8 After the machine is added, click Finish.9 UNIX • Make sure your machine supports the UNIX operating system before installing the UNIX printer driver (see "Operating System" on page 7).• The commands are marked with “”, when typing the commands, do not type “”.• Some features and optional goods may not be available depending on model or country (see "Operating System" on page 7). To use the UNIX printer driver, you have to install the UNIX printer driver package first, then setup the printer. You can download the UNIX printer driver package from the Samsung website (http://www.samsung.com > find your product > Support or Downloads).Installing the UNIX printer driver packageThe installation procedure is common for all variants of UNIX OS mentioned.1From the Samsung website, download and unpack the UNIX Printer Driver package to your computer. 2 Acquire root privileges.“su -”3 Copy the appropriate driver archive to the target UNIX computer. See administration guide of your UNIX OS for details. 4 Unpack the UNIX printer driver package.For example, on IBM AIX, use the following commands.“gzip -d < enter the package name | tar xf -”5 Go to the unpacked directory.
Installing driver over the network1863. Using a Network-Connected Machine6 Run the install script.“./install –i”install is the installer script file which is used to install or uninstall the UNIX Printer Driver package.Use “chmod 755 install” command to give the permission to the installer script.7 Execute the “. /install –c” command to verify installation results.8 Run “installprinter” from the command line. This will bring up the Add Printer Wizard window. Setup the printer in this window referring to the following procedures. On some UNIX OS, for example on Solaris 10, just added printers may not be enabled and/or may not accept jobs. In this case run the following two commands on the root terminal:“accept <printer_name>”“enable <printer_name>” Uninstalling the printer driver package The utility should be used to delete the printer installed in the system.a Run “uninstallprinter” command from the terminal.It will open the Uninstall Printer Wizard.The installed printers are listed in the drop-down list.b Select the printer to be deleted.c Click Delete to delete the printer from the system.d Execute the “. /install –d” command to uninstall the whole package.e To verify removal results, execute the “. /install –c” command. To re-install it, use the command “. /install –i” to reinstall the binaries.Setting up the printerTo add the printer to your UNIX system, run ‘installprinter’ from the command line. This will bring up the Add Printer Wizard window. Setup the printer in this window according to the following steps:1Type the name of the printer.2 Select the appropriate printer model from the model list.3 Enter any description corresponding to the type of the printer in the Type field. This is optional.
Installing driver over the network1873. Using a Network-Connected Machine4 Specify any printer description in the Description field. This is optional.5 Specify the printer location in the Location field.6 Type the IP address or DNS name of the printer in the Device textbox for network-connected printers. On IBM AIX with jetdirect Queue type, only the DNS name is possible-numeric IP address is not allowed.7 Queue type shows the connection as lpd or jetdirect in the corresponding list box. Additionally, usb type is available on Sun Solaris OS.8 Select Copies to set the number of copies.9 Check the Collate option to receive copies already sorted.10 Check the Reverse Order option to receive copies in the reverse order.11 Check the Make Default option to set this printer as default.12 Click OK to add the printer.
1883. Using a Network-Connected MachineIPv6 configuration IPv6 is supported properly only in Windows Vista or higher. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7 or "Menu overview" on page 33).• If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again using Clear Setting. The machine supports the following IPv6 addresses for network printing and managements.•Link-local Address: Self-configured local IPv6 address (Address starts with FE80).•Stateless Address: Automatically configured IPv6 address by a network router.•Stateful Address: IPv6 address configured by a DHCPv6 server.•Manual Address: Manually configured IPv6 address by a user.In the IPv6 network environment, follow the next procedure to use the IPv6 address.10 From the control panelActivating IPv6 • Accessing menus may differ from model to model (see "Accessing the menu" on page 33).• It may be necessary to press OK to navigate to lower-level menus for some models. 1Select (Menu) > Network > TCP/IP (IPv6) > IPv6 Activate on the control panel.2 Select On and press OK.3 Turn the machine off and turn it on again. When you install the printer driver, do not configure both IPv4 and IPv6. We recommend to configure either IPv4 or IPv6. DHCPv6 address configurationIf you have a DHCPv6 server on your network, you can set one of the following options for default dynamic host configuration.
IPv6 configuration1893. Using a Network-Connected Machine • Accessing menus may differ from model to model (see "Accessing the menu" on page 33).• It may be necessary to press OK to navigate to lower-level menus for some models. 1Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on the control panel.2 Press OK to select the required value you want.•DHCPv6 address: Always use DHCPv6 regardless of router request.•DHCPv6 Off: Never use DHCPv6 regardless of router request.•Router: Use DHCPv6 only when requested by a router.11 From the SyncThru™ Web ServiceActivating IPv61Access a web browser, such as Internet Explorer, from Windows.GEnter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.2 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons.•ID: admin•Password: sec00000 3 When the SyncThru™ Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network Settings.4 Click TCP/IPv6 on the left pane of the website.5 Check the IPv6 Protocol check box to activate IPv6.6 Click the Apply button.7 Turn the machine off and turn it on again.
IPv6 configuration1903. Using a Network-Connected Machine • You can also set the DHCPv6.• To manually set the IPv6 address:Check the Manual Address check box. Then, the Address/Prefix text box is activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F). IPv6 address configuration1Start a web browser, such as Internet Explorer, that supports IPv6 addressing as a URL.2 Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report (see "Printing a network configuration report" on page 175).•Link-local Address: Self-configured local IPv6 address (Address starts with FE80).•Stateless Address: Automatically configured IPv6 address by a network router.•Stateful Address: IPv6 address configured by a DHCPv6 server.•Manual Address: Manually configured IPv6 address by a user.3 Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]). Address must be enclosed in '[ ]' brackets.
1913. Using a Network-Connected MachineWireless network setup • Make sure your machine supports wireless networking. Wireless networking may not be available depending on the model (see "Features by models" on page 7).• If the IPv6 network seems to not be working, set all the network settings to the factory defaults and try again using Clear Setting. 12 Getting startedUnderstanding your network typeTypically, you can only have one connection between your computer and the machine at a time.Wireless network name and network passwordWireless networks require higher security, so when an access point is first set up, a network name (SSID), the type of security used, and a Network Password are created for the network. Ask your network administrator about this information before proceeding with the machine installation.Infrastructure modeThis is an environment generally used for homes and SOHOs (Small Office/ Home Office). This mode uses an access point to communicate with the wireless machine.Ad hoc modeThis mode does not use an access point. The wireless computer and wireless machine communicate directly.
Wireless network setup1923. Using a Network-Connected Machine13 Introducing wireless set up methodsYou can set wireless settings either from the machine or the computer. Choose the setting method from the below table. Some wireless network installation types may not be available depending on the model or country.
Wireless network setup1933. Using a Network-Connected Machine Set up method Connecting method Description & ReferenceWith Access PointFrom the computer Windows user, see "Access point via USB cable (recommended)" on page 198.Windows user, see "Access point without a USB cable" on page 201.Mac user, see "Access point via USB cable (recommended)" on page 206.Mac user, see "Access point without a USB cable" on page 208.See "Using a network cable" on page 212.From the machine’s control panel See "Machines with a display screen" on page 196.See "Using the menu button" on page 197.ABCORDDEF
Wireless network setup1943. Using a Network-Connected Machine • If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting for wireless network" on page 217).• It is strongly recommended that you set the password on Access Points. If you do not set the password on Acess Points, they might be exposed to illegal access from unknown machine including PCs, smart phones and printers. Refer to the Access Point user guide for password settings. Without Access PointFrom the computer Windows user, see "Ad hoc via USB cable" on page 203.Mac user, see "Ad hoc via USB cable" on page 210.Wi-Fi Direct setup See "Setting the Wi-Fi Direct for mobile printing" on page 215.Set up method Connecting method Description & ReferenceGH I
Wireless network setup1953. Using a Network-Connected Machine14 Using the WPS button If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer. • If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using.• When using the WPS button to set the wireless network, security settings may change. To prevent this, lock the WPS option for the current wireless security settings. The option name may differ depending on the access point (or wireless router) you are using. Items to prepare• Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS).• Check if your machine supports Wi-Fi Protected Setup™ (WPS).• Networked computer (PIN mode only)Choosing your typeThere are two methods available to connect your machine to a wireless network using the (WPS) button on the control panel.The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the (WPS) button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router) respectively.The Personal Identification Number (PIN) method helps you connect your machine to a wireless network by entering the supplied PIN information on a Wi-Fi Protected Setup™ WPS-enabled access point (or wireless router).Factory default in your machine is PBC mode, which is recommended for a typical wireless network environment. You can change the WPS mode from the control panel (Menu) > Network > Wireless > OK> WPS Setting).
Wireless network setup1963. Using a Network-Connected MachineMachines with a display screenConnecting in PBC mode1Select (Menu) > Network > Wireless > WPS Setting > PBC on the control panel.Or press and hold the (WPS) button on the control panel for more than 2 seconds.The machine starts waiting for up to two minutes until you press the WPS (PBC) button on the access point (or wireless router).2 Press the WPS (PBC) button on the access point (or wireless router).The messages are displayed on the display screen in the order below:a Connecting: The machine is connecting to the access point (or wireless router).b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.c AP SSID: After completing the wireless network connection process, the AP’s SSID information appears on the display.3 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.Connecting in PIN mode1Select (Menu) > Network > Wireless > WPS Setting > PIN on the control panel.Or press and hold the (WPS) button on the control panel for more than 2 seconds.2 The eight-digit PIN appears on the display. You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router).The messages are displayed on the display screen in the order below:a Connecting: The machine is connecting to the wireless network.b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on.c SSID Type: After completing the wireless network connection process, the AP’s SSID information is displayed on the LCD display.3 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.Re-connecting to a networkWhen the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address.
Wireless network setup1973. Using a Network-Connected Machine In the following cases, the machine automatically re-connects to the wireless network:• The machine is turned off and on again.• The access point (or wireless router) is turned off and on again. Canceling the connection processTo cancel the wireless network connection when the machine is connecting to the wireless network, press and release the (Stop/Clear) on the control panel. You need to wait 2 minutes to re-connect to the wireless network.Disconnecting from a networkTo disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds.•When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network and the WPS LED turns off.•When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off.15 Using the menu button Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Features by models" on page 7). Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 179).
Wireless network setup1983. Using a Network-Connected Machine1Select (Menu) > Network > Wireless > WLAN Settings on the control panel.2 Press the OK to select the setup method you want.•Wizard (recommended): In this mode, the setup is automatic. The machine will display a list of available networks from which to choose. After a network is chosen then printer will prompt for the corresponding security key.•Custom: In this mode, users can give or edit manually their own SSID, or choose the security option in detail. 16 Setup using Windows Shortcut to the Wireless Setting program without the CD: If you have installed the printer driver once, you can access the Wireless Setting program without the CD (see "Accessing management tools" on page 269). Access point via USB cable (recommended)Items to prepare• Access point• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cableCreating the infrastructure network1Check wheter the USB cable is connected to the machine.2 Turn on your computer, access point, and machine.
Wireless network setup1993. Using a Network-Connected Machine3 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.•For Windows 8,If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.4 Read and accept The software End User License Agreement and Using Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next.5 Select Wireless network connection on the Printer Connection Type screen. Then, click Next.
Wireless network setup2003. Using a Network-Connected Machine6 If Select Select the Wireless Setup Method screen appears, select Using a USB cable and click Next.If the screen does not appear, go to step 10.7 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next. If you cannot find the network name you want to choose, or if you want to set the wireless configuration manually, click Advanced Setting.•Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive).•Operation Mode: Select Infrastructure.•Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP key can access the network.WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase), which is manually configured on the access point and each of its clients.•Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES).•Network Password: Enter the encryption network password value.•Confirm Network Password: Confirm the encryption network password value.•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the access point has security settings.Enter the Network Password of the access point (or router).
Wireless network setup2013. Using a Network-Connected Machine8 If your printer supports Wi-Fi Direct and this function is disabled, its corresponding screen will appear. Click OK and Next. • Wi-Fi Direct option appears on the screen only if your printer supports this feature.• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 216).•Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters.•Password setting is the numeric string, and the size is 8 ~ 64 characters. 9 When the wireless network set up is completed, disconnect the USB cable between the computer and machine. Click Next.10 Select the components to be installed. 11 After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next.12 If you want to register your machine with the Samusng web site and receive useful information, click On-line Registration. If not, click Finish.Access point without a USB cableItems to prepare• WiFi-enabled PC running Windows 7 or higher and an access point (router)• Software CD that was provided with your machine• A machine installed with a wireless network interface
Wireless network setup2023. Using a Network-Connected MachineCreating the infrastructure network1Turn on your computer, access point, and machine.2 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.3 Read and accept The software End User License Agreement and Using Enhanced Features and Participating in Printer Usage Information Collecion Program (optional). Then, click Next.4 Select Wireless network connection on the Printer Connection Type screen. Then, click Next.
Wireless network setup2033. Using a Network-Connected Machine5 Select Using a direct wireless connection on the Select the Wireless Setup Method screen. Then, click Next.If the screen does not appear, go to step 7.6 When the wireless network set up is completed, click Next. 7 Select the components to be installed. 8 After selecting the components, you can also change the printer driver name, set the machine to be shared on the network, set the machine as the default machine. Click Next.9 If you want to register your machine with the Samusng web site and receive useful information, click On-line Registration. If not, click Finish.Ad hoc via USB cableIf you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below.Items to prepare• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cable
Wireless network setup2043. Using a Network-Connected MachineCreating the ad hoc network in Windows1Turn on your computer and the wireless network machine.2 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.•For Windows 8,If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.3 Read and accept The software End User License Agreement and Using Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next.4 Select Configure the wireless network connection using USB cable on the Printer Connection Type screen.5 After searching the wireless networks, a list of wireless networks your machine has searched appears. Click Advanced Setting. •Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive).•Operation Mode: Select ad hoc.•Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).•Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
Wireless network setup2053. Using a Network-Connected Machine•Encryption: Select the encryption (None, WEP64, WEP128).•Network Password: Enter the encryption network password value.•Confirm Network Password: Confirm the encryption network password value.•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.The wireless network security window appears when the ad hoc network has security enabled.Select Open System or Shared Key for the authentication and click Next.• WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. 6 The window showing the wireless network setting appears. Check the settings and click Next. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static.If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address.•For the DHCP methodIf the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).•For the Static methodIf the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine.For example,If the computer’s network information is as shown follows:- IP address: 169.254.133.42- Subnet Mask: 255.255.0.0Then, the machine’s network information should be as below:- IP address: 169.254.133.43- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.1
Wireless network setup2063. Using a Network-Connected Machine7 The Wireless Network Setting Complete window appears. Click Next.8 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.9 Select the components to be installed. 10 After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next.11 If you want to register your machine with the Samusng web site and receive useful information, click On-line Registration. If not, click Finish.17 Setup using MacAccess point via USB cable (recommended)Items to prepare•Access point• Network-connected printer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cable1Make sure that the machine is connected to your computer andpowered on.2 Insert the supplied software CD into your CD-ROM drive.3 Double-click the CD-ROM icon that appears on your Mac desktop.• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.4 Double-click the MAC_Installer folder > Installer OS X icon.5 Click Continue.6 Read the license agreement and click Continue.7 Click Agree to agree to the license agreement.8 Click Install. All components necessary for machine operations will be installed.If you click Customize, you can choose individual components to install.9 Enter the password and click OK.
Wireless network setup2073. Using a Network-Connected Machine10 Select Wireless network connection on the Printer Connection Type and click Continue. 11 Select Using a USB cable on the Configure wirelesssettings to the printer screen and click Next. If the screen does not appear, go to step 15.12 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next.
Wireless network setup2083. Using a Network-Connected Machine When you set the wireless configuration manually, click Advanced Setting.•Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive).•Operation Mode: Select Infrastructure.•Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP key can access the network.WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients.•Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES)•Network Password: Enter the encryption network password value.•Confirm Network Password: Confirm the encryption network password value.•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.The wireless network security window appears when the access point has security enabled.Enter the Network Password of the access point (or router). 13 The window showing the wireless network setting appears. Check the settings and click Next. • Wi-Fi Direct option appears on the screen only if your printer supports this feature.• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 216).•Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters.•Password setting is the numeric string, and the size is 8 ~ 64 characters. 14 The Wireless Network Setting Complete window appears. Click Next.15 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.Access point without a USB cableItems to prepare• WiFi-enabled Mac running Mac OS 10.7 or higher and an access point (router)• Software CD that was provided with your machine• A machine installed with a wireless network interface
Wireless network setup2093. Using a Network-Connected Machine1Make sure that the machine is connected to your computer andpowered on.2 Insert the supplied software CD into your CD-ROM drive.3 Double-click the CD-ROM icon that appears on your Mac desktop.• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.4 Double-click the MAC_Installer folder > Installer OS X icon.5 Click Continue.6 Read the license agreement and click Continue.7 Click Agree to agree to the license agreement.8 Click Install. All components necessary for machine operations will be installed. If you click Customize, you can choose individual components to install.9 Enter the password and click OK.10 Select Wireless network connection on the Printer Connection Type and click Continue.
Wireless network setup2103. Using a Network-Connected Machine11 Select Using a direct wireless connection on the Configure wirelesssettings to the printer screen and click Next. If the screen does not appear, go to step 13.12 When the wireless network set up is completed, click Next. 13 After the installation is finished, click Close.Ad hoc via USB cableIf you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad hoc wireless network by following these simple directions.Items to prepare• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cableCreating the ad hoc network in Mac1Check whether the USB cable is connected to the machine.2 Turn on your computer and the wireless network machine.3 Insert the supplied software CD into your CD-ROM drive.4 Double -click the CD-ROM icon that appears on your Mac desktop.5 Double-click the MAC_Installer folder > Installer OS X icon. 6 Click Continue.7 Read the license agreement and click Continue.
Wireless network setup2113. Using a Network-Connected Machine8 Click Agree to agree to the license agreement.9 When the message that warns that all applications will close on your computer appears, click Continue.10 Click Wireless Network Setting button on the User Options Pane. 11 After searching the wireless networks, a list of wireless networks your machine has searched appears. Click Advanced Setting. •Enter the wireless Network Name: Enter the SSID name (SSID is case-sensitive).•Operation Mode: Select ad hoc.•Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz).•Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP key can access the network.•Encryption: Select the encryption (None, WEP64, WEP128).•Network Password: Enter the encryption network password value.•Confirm Network Password: Confirm the encryption network password value.•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.The wireless network security window appears when the ad hoc network has security setting.Select Open System or Shared Key for the authentication and click Next.• WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. 12 The window showing the wireless network settings appears. Check the settings and click Next.
Wireless network setup2123. Using a Network-Connected Machine Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static.If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address.•For the DHCP methodIf the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).•For the Static methodIf the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine.For example,If the computer’s network information is shown as follows:- IP address: 169.254.133.42- Subnet Mask: 255.255.0.0Then, the machine’s network information should be as shown below:- IP address: 169.254.133.43- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.1 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next..If the network cable is connected, it may have trouble finding the machine when configuring the wireless network.14 The wireless network connects according to the network configuration.15 Wireless network set up is completed. After installation is finished, click Quit. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Mac" on page 152). 18 Using a network cable Machines that do not support the network port will not be able to use this feature (see "Rear view" on page 23). Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures.
Wireless network setup2133. Using a Network-Connected Machine • After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 179).• See your network administrator, or the person that set up your wireless network, for information about your network configuration. Items to prepare• Access point• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• Network cablePrinting a network configuration reportYou can identify the network settings of your machine by printing a network configuration report.See "Printing a network configuration report" on page 175.IP setting using SetIP Program (Windows)This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Setting IP address" on page 175.Configuring the machine’s wireless networkBefore starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network.To configure wireless parameters, you can use SyncThru™ Web Service.Using SyncThru™ Web ServiceBefore starting wireless parameter configuration, check the cable connection status.
Wireless network setup2143. Using a Network-Connected Machine1Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.For example,3 Click Login on the upper right of the SyncThru™ Web Service website.4 Type in the ID and Password then click Login. We recommend you to change the default password for security reasons.•ID: admin •Password: sec000005 When the SyncThru™ Web Service window opens, click Network Settings.6 Click Wireless > Wizard. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. 7 Select the one Network Name(SSID) in the list.•SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case sensitive.•Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network password" on page 191).-Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment.-Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network’s Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. 8 Click Next.If the wireless security setting window appears, enter the registered password (network password) and click Next.9 The confirmation window appears, please check your wireless setup. If the setup is right, click Apply.
Wireless network setup2153. Using a Network-Connected Machine Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously. 10 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.19 Turning the Wi-Fi network on/off If your machine has a display, you can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu. 1Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.For example,3 Click Login on the upper right of the SyncThru™ Web Service website.4 Type in the ID and Password, then click Login. We recommend you to change the default password for security reasons.•ID: admin •Password: sec00000 5 When the SyncThru™ Web Service window opens, click Network Settings.6 Click Wireless > Custom.You can also turn the Wi-Fi network on/off.20 Setting the Wi-Fi Direct for mobile printingWi-Fi Direct is an easy-to-setup peer-to-peer connection method between the Wi-Fi Direct certified printer and a mobile device that provides a secure connection and better throughput than ad hoc mode.With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while concurrently connecting to an access point, You can also use a wired network and a Wi-Fi Direct network simultaneously so multiple users can access and print documents both from Wi-Fi Direct and from a wired network.
Wireless network setup2163. Using a Network-Connected Machine • You cannot connect your mobile device to the internet through the printer’s Wi-Fi Direct.• The supported protocol list may differ from your model, Wi-Fi Direct networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP services. • The maximum number of devices that can be connected via Wi-Fi Direct is 3. Setting up Wi-Fi DirectYou can enable Wi-Fi Direct feature by one of the following methods.From the USB cable-connected computer(recommended)After the driver installation is complete, Samsung Easy Printer Manager can be set and changes in the Wi-Fi Direct can be made. Samsung Easy Printer Manager is Available for Windowsand Mac OS users only. - From the Start menu, select Programs or All Programs > Samsung Printers > Samsung Easy Printer Manager > Device Settings > Network.Wi-Fi Direct On/Off: Select On to enable.Device Name: Enter the printer’s name for searching for your printer on a wireless network. By default, the device name is the model name.IP Address: Enter the IP address of the printer. This IP address is used only for the local network and not for the infrastructure wired or wireless network. We recommend using the default local IP address (the default local IP address of the printer for Wi-Fi Direct is 192.168.3.1 )Group Owner: Activate this option to assign the printer the Wi-Fi Direct group’s owner. The Group Owner acts similar to a wireless access point. We recommend activating this option.Network Password: If your printer is a Group Owner, a Network Password is required for other mobile devices to connect to your printer. You can configure a network password yourself, or can remember the given Network Password that is randomly generated by default.From the machine (Machines with a display screen) Accessing menus may differ from model to model (see "Accessing the menu" on page 33 ). • Select (Menu) > Network > Wireless > Wi-Fi Direct on the control panel.•Enable Wi-Fi Direct.
Wireless network setup2173. Using a Network-Connected MachineFrom the network-connected computerIf your printer is using a network cable or a wireless access point, you can enable and configure Wi-Fi Direct from SyncThru™ Web Service.• Access SyncThru™ Web Service, select Settings > Network Settings > Wireless > Wi-Fi Direct.• Enable or disable Wi-Fi Direct and set other options. •For Linux OS users,- Print an IP network configuration report to check the output (see "Printing a network configuration report" on page 175).- Access SyncThru Web Service, select Settings > Network Settings > Wireless > Wi-Fi Direct.- Enable or disable Wi-Fi Direct. Setting up the mobile device• After setting up Wi-Fi Direct from the printer, refer to the user manual of the mobile device you are using to set its Wi-Fi Direct.• After setting up Wi-Fi Direct, you need to download the mobile printing application (For example: Samsung Mobile printer) to print from your smartphone. • When you have found the printer you want to connect to from your mobile device, select the printer and the printer's LED will blink. Press the WPS button on the printer and it will be connected to your mobile device.• If your mobile device does not support Wi-Fi Direct, you need to enter the "Network Key" of a printer instead of pushing the WPS button. 21 Troubleshooting for wireless networkProblems during setup or driver installationPrinters Not Found• Your machine may not be turned on. Turn on your computer and the machine.• USB cable is not connected between your computer and machine. Connect the machine to your computer using the USB cable.• The machine does not support wireless networking. Check the machine's user's guide included on the software CD supplied with your machine and prepare a wireless network machine.
Wireless network setup2183. Using a Network-Connected MachineConnecting Failure - SSID Not Found• The machine is unable to find the network name (SSID) you have selected or entered. Check the network name (SSID) on your access point and try connecting again. • Your access point is not turned on. Turn on your access point.
Wireless network setup2193. Using a Network-Connected MachineConnecting Failure - Invalid Security• Security is not configured correctly. Check the configured security on your access point and machine.Connecting Failure - General Connection Error• Your computer is not receiving a signal from your machine. Check the USB cable and your machine’s power.Connecting Failure - Connected Wired Network• Your machine is connected with a wired network cable. Remove the wired network cable from your machine.Connecting Failure - Assigning the IP address• Cycle the power for the access point (or wireless router) and machine.PC Connection Error• The configured network address is unable to connect between your computer and machine.- For a DHCP network environmentThe machine receives the IP address automatically (DHCP) when computer is configured to DHCP. If the printing job is not working in DHCP mode, the problem may be caused by the automatically changed IP address. Compare the IP address between the product's IP address and the printer port's IP address.How to compare:1 Print the network information report of your printer, and then check the IP address (see "Printing a network configuration report" on page 175).2 Check the printer port's IP address from your computer.a Click the Windows Start menu. b For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. c Right-click your machine.d For Windows XP/2003/2008/Vista, press Properties.For Windows 7 and Windows Server 2008 R2, from context menus, select the Printer properties.If Printer properties item has  mark, you can select other printer drivers connected with selected printer.e Click Port tab.f Click Configure Port... button.g Check if Printer Name or IP Address: is the IP address on the network configuration Sheet.3 Change the printer port's IP address if it is different from the network information report's.If you want to use the software installation CD to change the port IP, Connect to a network printer. Then reconnect the IP address.
Wireless network setup2203. Using a Network-Connected Machine- For a Static network environmentThe machine uses the static address when the computer is configured to static address.For example,If the computer’s network information is as shown below:IP address: 169.254.133.42Subnet Mask: 255.255.0.0Then the machine’s network information should be as below:IP address: 169.254.133.43Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)Gateway: 169.254.133.1Other problemsIf problems occur while using the machine on a network, check the following: For information on the access point (or wireless router), refer to its own user's guide. • You cannot enable wired and wireless networks at the same time.• Your computer, access point (or wireless router), or machine may not be turned on.• Check the wireless reception around the machine. If the router is far from the machine or there is an obstacle, you might have difficulty receiving the signal. • Cycle the power for the access point (or wireless router), machine, and computer. Sometimes cycling the power can recover network communication.• Check whether firewall software (V3 or Norton) is blocking the communication. If the computer and the machine are connected on the same network and it cannot be found when searching, firewall software might be blocking the communication. Refer to the user's guide for the software to turn it off and try searching for the machine again.• Check whether the machine's IP address is allocated correctly. You can check the IP address by printing the network configuration report.• Check whether the access point (or wireless router) has a configured security (password). If it has a password, refer to the access point (or wireless router) administrator.• Check the machine's IP address. Reinstall the machine driver and change the settings to connect to the machine on the network. Due to the characteristics of DHCP, the allocated IP address could change if the machine is not used for a long time or if the access point has been reset.Register the product's MAC address when you confogure the DHCP server on the access point (or wireless router). Then you can always use the IP address that is set with the MAC address. You can identify the Mac address of your machine by printing a network configuration report (see "Printing a network configuration report" on page 175).
Wireless network setup2213. Using a Network-Connected Machine• Check the wireless environment. You might not be able to connect to the network in the infrastructure environment where you need to type in a user's information before connecting to the access point (or wireless router).• This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless communication types (e.g., Bluetooth) are not supported.• When using the ad hoc mode, in operating systems such as Windows Vista, you might need to set the wireless connection setting every time you use the wireless machine. • You cannot use infrastructure mode and ad hoc mode at the same time for Samsung wireless network machines.• The machine is within the range of the wireless network.• The machine is located away from obstacles that could block the wireless signal.Remove any large metal objects between the access point (or wireless router) and the machine.Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete.• The machine is located away from other electronic devices that may interfere with the wireless signal.Many devices can interfere with the wireless signal, including a microwave oven and some Bluetooth devices.• Whenever the configuration of your access point (or wireless router) changes, you must do the product's wireless network setup again.• The maximum number of device that can be connected via Wi-Fi Direct is 3. • If Wi-Fi Direct is ON, this machine only supports IEEE 802.11 b/g.• If the access point is set to work with the 802.11n standard only, it may not connect to your machine.
2223. Using a Network-Connected MachineSamsung MobilePrint22 What is Samsung MobilePrint?Samsung MobilePrint is a free application that enables users to print photos, documents, and web pages directly from your smartphone or tablet. Samsung MobilePrint is not only compatible with your Android, Windows and iOS smart phones but also with your iPod Touch and tablet PC. It connects your mobile device to a network connected Samsung printer or to a wireless printer through a Wi-Fi access point. Installing a new driver or configuring network settings isn’t necessary – just simply install the Samsung MobilePrint application, and it will automatically detect compatible Samsung printers. Besides printing photos, web pages, and PDFs, scanning is also supported. If you have Samsung multfunction printer, scan any document into a JPG, PDF, or PNG format for quick and easy viewing on your mobile device. 23 Downloading Samsung MobilePrintTo download Samsung MobilePrint, go to the application store (Samsung Apps, Android Market, App Store, Marketplace) on your mobile device, and just search for “Samsung MobilePrint.” You can also visit iTunes for Apple devices or Marketplace for Windows devices on your computer.24 Supported Mobile OS • Android OS 2.1 or higher • iOS 4.0 or higher• Windows Phone 7 or higher25 Supported devices•iOS 4.0 or higher: iPod Touch, iPhone, iPad•Android 2.1 or higher: Galaxy S series, Galaxy Note series, Galaxy Tab series, Galaxy Camera series, and Android mobile device•Windows Phone 7 or higher: Samsung Focus, Omnia7, and OmniaW, and Windows mobile devices
2233. Using a Network-Connected MachineAirPrint26 Setting up AirPrintBonjour(mDNS) and IPP protocols are required on your machine to use the AirPrint feature. You can enable the AirPrint feature by one of the following methods.1Check whether the machine is connected to the network.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.For example,3 Click Login in the upper right of the SyncThru™ Web Service website.4 Type in the ID and Password, then click Login. If it’s your first time logging into SyncThru™ Web Service, type in the below default ID and password. We recommend you to change the default password for security reasons.•ID: admin•Password: sec00000 5 When the SyncThru™ Web Service window opens, click Settings > Network Settings.6 Click Raw TCP/IP, LPR, IPP or mDNS .You can enable the IPP protocol or mDNSGprotocol.27 Printing via AirPrintFor example, the iPad manual provides these instructions:1Open your email, photo, web page, or document you want to print.2 Touch the action icon( ).3 Select your printer driver name and option menu to set up.4 Touch Print button. Print it out.AirPrint allows you to wirelessly print directly from an iPhone, iPad, and iPod touch running the latest version of iOS.
AirPrint2243. Using a Network-Connected Machine Cancelling print job: To cancel the printing job or view the print summary, click the print center icon ( ) in multitasking area. You can click cancel in the print center.
2253. Using a Network-Connected MachineGoogle Cloud Print™Google Cloud Print™ is a service that allows you to print to a printer using your smart phone, tabletS or any other web-connected devices. Just register your Google account with the printer, and you are ready to use the Google Cloud Print™ service. You can print your document or email with Chrome OS, Chrome browser, or a Gmail™/ Google Docs™ application on your mobile device, so you don’t need to install the printer driver on the mobile device.GRefer to the Google website (http://www.google.com/cloudprint/learn/ or http://support.google.com/cloudprint) for more information about Google Cloud Print™.28 Registering your Google account to the printer • Make sure the printer machine is turned on and connected to a wired or wireless network that has access to the Internet. •You should create your Google account in the advance. 1Open the Chrome browser.2 Visit www.google.com.3 Sign in to the Google website with your Gmail™ address.4 Enter your printer’s IP address in the address field and press the Enter key or click Go.5 Click Login in the upper right corner of the SyncThru™ Web Service website.6 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and Password. We recommend you to change the default password for security reasons.•ID: admin•Password: sec00000 If the network environment is using a proxy server, you need to configure the proxy’s IP and port number from Settings > Network Settings > Google Cloud PrintGeGProxy Setting. Contact your network service provider or network administrator for more information. 7 When the SyncThru™ Web Service window opens, click Settings > Network Settings > Google Cloud Print.8 Enter your printer’s name and description.9 Click Register.The confirmation pop-up window appears. If you set the browser to block pop-ups, the confirmation window will not appear. Allow the site to show pop-ups.
Google Cloud Print™2263. Using a Network-Connected Machine10 Click Finish printer registration.11 Click Manage your printers.Now your printer is registered with Google Cloud Print™ service.Google Cloud Print™-ready devices will appear in the list.29 Printing with Google Cloud Print™The printing procedure varies depending on the application or the device you are using.GYou can see the application list that supports Google Cloud Print™ service. Make sure the printer is turned on and connected to a wired or wireless network that has access to the Internet. Printing from an application on mobile deviceThe following steps are an example of using the Google Docs™ app from Android mobile phone.1Install the Cloud Print application on your mobile device. If you do not have the application, download it from the application storeGsuch as Android Market or App Store. 2 Access the Google Docs™ application from your mobile device. 3 Tap the option button of the document that you want to print.4 Tap the send button.5 Tap the Cloud Print button.6 Set the printing options if you want.7 Tap Click here to Print.Printing from the Chrome browserThe following steps are an example of using the Chrome browser.1Run Chrome.2 Open the document or email that you want to print.3 Click the wrench icon in the browser’s top right corner.4 Click Print. A new tab for printing appears.
Google Cloud Print™2273. Using a Network-Connected Machine5 Select Print with Google Cloud Print.6 Click the Print button.
4. Special FeaturesThis chapter explains special copying, scanning, faxing, and printing features.• Altitude adjustment 229• Entering various characters 230• Setting up the fax address book 232• Printing features 235• Scan features 250• Fax features 259 • The procedures in this chapter are mainly based on Windows 7.• It may be necessary to press OK to navigate to lower-level menus for some models.
2294. Special FeaturesAltitude adjustmentPrint quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for the best print quality.Before you set the altitude value, determine the altitude where you are.1High 32High 23High 14NormalYou can set the altitude value from Device Settings in 6DPVXQJ(DV\3ULQWHU0DQDJHUprogram or Machine section in Printer Settings Utility program.• For Windows and Mac users, you set from Samsung Easy Printer Manager! (Switch to advanced mode)!Device Settings, see "Device Settings" on page 284. • If your machine is connected to the network, you can set the altitude via SyncThru™ Web Service (see "Using SyncThru™ Web Service" on page 273).• You can also set the altitude in System Setup option on the machine’s display (see "Menu overview" on page 33). 04,000 m(13,123 ft) 3,000 m(9,842 ft) 2,000 m(6,561 ft) 1,000 m(3,280 ft) 4321
2304. Special FeaturesEntering various charactersAs you perform various tasks, you may need to enter names and numbers. For example, when you set up your machine, you enter your name or your company’s name, and the fax number. When you store fax numbers or email addresses in memory, you may also enter the corresponding names.1 Entering alphanumeric charactersPress the button until the correct letter appears on the display. For example, to enter the letter O, press 6, labeled with MNO. Each time you press 6, the display shows a different letter, M, N, O, m, n, o and finally 6. To find the letter that you want to enter, see "Keypad letters and numbers" on page 230. • You can enter a space by pressing 1 twice.• To delete the last digit or character, press the left/right or up/down arrow button. 2 Keypad letters and numbers • Special character sets may differ from your machine depending on its options or the models.• Some of the follow key values may not appear depending on the job you are doing. Key Assigned numbers, letters, or characters1@ / . ‘ 12A B C a b c 23D E F d e f 34 G H I g h i 45J K L j k l 5
Entering various characters2314. Special Features6 M N O m n o 67P Q R S p q r s 78 T U V t u v 89W X Y Z w x y z 90& + - , 0** (These symbols are available when you type for network authentication.)## (These symbols are available when you type for network authentication.)Key Assigned numbers, letters, or characters
2324. Special FeaturesSetting up the fax address bookYou can set up speed number with the fax numbers you use frequently via SyncThru™ Web Service and then easily and quickly enter fax numbers by entering the location numbers assigned to them in address book.3 Registering a speed dial number1Select (fax) > (Address Book) > New & Edit > Speed Dial on the control panel. 2 Enter a speed dial number and press OK. If an entry is already stored in the number you choose, the display shows the message to allow you to change it. To start over with another speed dial number, press (Back). 3 Enter the name you want and press OK.4 Enter the fax number you want and press OK.5 Press the (Stop/Clear) button to return to ready mode.4 Using speed dial numbersWhen you are prompted to enter a destination number while sending a fax, enter the speed dial number at which you stored the number you want. • For a one-digit (0-9) speed dial number, press and hold the corresponding digit button on the number keypad for more than 2 seconds. • For a two- or three-digit speed dial number, press the first digit button(s) and then hold down the last digit button for more than 2 seconds.• You can print the address book list by selecting (fax) > (Address Book) > Print. 5 Editing speed dial numbers1Select (fax) > (Address Book) > New & Edit > Speed Dial on the control panel. 2 Enter the speed dial number you want to edit and press OK.3 Change the name and press OK.4 Change the fax number and press OK.
Setting up the fax address book2334. Special Features5 Press (Stop/Clear) to return to ready mode.6 Registering a group dial number1Select (fax) > (Address Book) > New & Edit > Group Dial on the control panel. 2 Enter a group dial number and press OK. If an entry is already stored in the number you choose, the display shows the message to allow you to change it. To start over with another speed dial number, press (Back). 3 Search by entering the first few letters of the speed dial’s name to put in the group.4 Select the name and number you want and press OK.5 Select Yes when Another Number? appears.6 Repeat step 3 to include other speed dial numbers into the group.7 When you have finished, select No when Another Number? appears and press OK.8 Press (Stop/Clear) to return to ready mode.7 Editing group dial numbers1Select (fax) > (Address Book) > New & Edit > Group Dial on the control panel. 2 Enter the group dial number you want to edit and press OK.3 Enter a new speed dial number to add and press OK, then Add? appears.Enter a speed dial number stored in the group and press OK, Delete? appears.4 Press OK to add or delete the number.5 Repeat step 3 to add or delete more numbers.6 Select No at the Another Number? and press OK.7 Press (Stop/Clear) to return to ready mode.8 Searching address book for an entryThere are two ways to search for a number in memory. You can either scan from A to Z sequentially, or you can search by entering the first letters of the name associated with the number.
Setting up the fax address book2344. Special Features1Select ct (fax) > (Address Book) > Search & Dial > Speed Dial or Group Dial on the control panel. 2 Enter All or ID and press OK.3 Press the name and number or the keypad button labeled with the letter you want to search.For example, if you want to find the name “MOBILE,” press the 6 button, which is labeled with “MNO.”4 Press (Stop/Clear) to return to ready mode.9 Printing address bookYou can check your (Address Book) settings by printing a list.1Select ct (fax) > (Address Book) > Print on the control panel. 2 The machine begins printing.
2354. Special FeaturesPrinting features • For basic printing features, refer to the Basic Guide (see "Basic printing" on page 55).• This feature may not be available depending on model or optional goods (see "Features by models" on page 7). 10 Changing the default print settings1Click the Windows Start menu. • For Windows 8, from the Charms, select Search > Settings.2 For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. • For Windows 7/8, select Control Panel > Devices and Printers. 3 Right-click on your machine.4 For Windows XP/Server 2003/Server 2008/Vista, select Printing Preferences.For Windows 7/8 or Windows Server 2008 R2, from context menus, select Printing preferences. If Printing preferences has a , you can select other printer drivers connected to the selected printer. 5 Change the settings on each tab. 6 Click OK. If you want to change the settings for each print job, change it in Printing Preferences. 11 Setting your machine as a default machine1Click the Windows Start menu.• For Windows 8, from the Charms, select Search > Settings.2 For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. • For Windows 7/8, select Control Panel > Devices and Printers.
Printing features2364. Special Features3 Select your machine.4 Right-click your machine and select Set as Default Printer. For Windows 7 or Windows Server 2008 R2, if Set as default printer has a , you can select other printer drivers connected to the selected printer. 12 Using advanced print features XPS printer driver: used to print XPS file format. • See "Features by models" on page 7.• The XPS printer driver can be installed only on Windows Vista OS or higher.•For models that provide XPS driver from the Samsung website, http://www.samsung.com > find your product> Support or downloads. Printing to a file (PRN)You will sometimes need to save the print data as a file. 1Check the Print to file box in the Print window.2 Click Print.3 Type in the destination path and the file name, and then click OK.For example, c:\Temp\file name. If you type in only the file name, the file is automatically saved in My Documents, Documents and Settings, or Users. The saved folder may differ, depending on your operating system or the application you are using.
Printing features2374. Special FeaturesUnderstanding special printer featuresYou can use advanced printing features when using your machine.To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print settings. The machine name, that appears in the printer properties window may differ depending on the machine in use. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.• Select the Help menu or click the button from the window or press F1 on your keyboard and click on any option you want to know about (see "Using help" on page 58). Item DescriptionMultiple Pages per SideSelects the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet.
Printing features2384. Special FeaturesPoster PrintingPrints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets together to form one poster-size document.Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab to make it easier to paste the sheets together.Booklet PrintingabPrints your document on both sides of a sheet of paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet. • If you want to make a booklet, you need to print on Letter, Legal, A4, US Folio, or Oficio sized print media. • The Booklet Printing option is not available for all paper sizes. Select the available paper Size option under the Paper tab to see what paper sizes are available.• If you select an unavailable paper size, this option can be automatically canceled. Select only available paper (paper without or mark). •Double-sided Printingb•Double-sided Printing (Manual)aPrint on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented. • You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper • If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of the document first. After that, a message appears on your computer.•Skip Blank Pages feature does not work when you select the duplex option. Item Description89
Printing features2394. Special Features•Double-sided Printingb•Double-sided Printing (Manual)a•Off: Disables this feature.•Long Edge: This option is the conventional layout used in bookbinding.•Short Edge: This option is the conventional layout used in calendars.Paper Options Changes the size of a document to appear larger or smaller on the printed page by entering in a percentage by which to enlarge or decrease the document.Watermark The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. Watermark(Creating a watermark)a To change the print settings from your software application, access Printing Preferences.b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.c Enter a text message in the Watermark Message box. You can enter up to 256 characters. The message displays in the preview window.Item Description
Printing features2404. Special FeaturesWatermark(Editing a watermark)a To change the print settings from your software application, access Printing Preferences.b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. c Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options. d Click Update to save the changes.e Click OK or Print until you exit the Print window. Watermark(Deleting a watermark)a To change the print settings from your software application, access Printing Preferences.b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. c Select the watermark you want to delete from the Current Watermarks list and click Delete. d Click OK or Print until you exit the Print window.OverlayaThis option is available only when you use the PCL/SPL printer driver (see "Software" on page 7).An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing exactly the same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the machine: just print the letterhead overlay on your document.To use a page overlay, you must create a new page overlay containing your logo or image. • The overlay document size must be the same as the document you print with the overlay. Do not create an overlay with a watermark.• The resolution of the overlay document must be the same as that of the document you will print with the overlay. Item Description
Printing features2414. Special FeaturesOverlaya(Creating a new page overlay)a To save the document as an overlay, access Printing Preferences.b Click the Advanced tab, and select Edit from the Text drop-down list. Edit Overlay window appears.c In the Edit Overlay window, click Create. d In the Save As window, type a name up to eight characters in the File name box. Select the destination path, if necessary (The default is C:\Formover).e Click Save. The name appears on the Overlay List. f Click OK or Print until you exit the Print window.The file is not printed. Instead, it is stored on your computer hard disk drive.Overlaya(Using a page overlay)a Click the Advanced tab. b Select the desired overlay from the Text drop-down list. c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window. After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. d If necessary, check Confirm Page Overlay When Printing box. If this box is checked, a message window appears each time you submit a document for printing, asking you to confirm printing an overlay on your document. If this box is not checked and an overlay has been selected, the overlay automatically prints with your document. e Click OK or Print until you exit the Print window. Overlaya(Deleting a page overlay)a In the Printing Preferences window, click the Advanced tab. b Select Edit in the Text drop down list. c Select the overlay you want to delete from the Overlay List box. d Click Delete. e When a confirming message window appears, click Yes.f Click OK or Print until you exit the Print window. You can delete page overlays that you no longer use.a. This option is not available when you use XPS driver.Item Description
Printing features2424. Special Features b. M287xND/M287xFD/M287xFW/M287xHN only.
Printing features2434. Special Features13 Using Direct Printing Utility • Direct Printing Utility may not be available depending on model or optional goods (see "Software" on page 7). • Available for Windows OS users only. What is Direct Printing Utility?Direct Printing Utility is a program that sends the PDF files directly to your machine to print without having to opening the file.To install this program:Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or Downloads). • Optional memory Mass storage device (HDD) should be installed on your machine, to print files using this program (see "Variety feature" on page 10).• You cannot print PDF files that are restricted. Deactivate the printing restriction feature and retry printing.• You cannot print PDF files that are restricted by a password. Deactivate the password feature, and retry printing.• Whether or not a PDF file can be printed using the Direct Printing Utility program depends on how the PDF file was created.• The Direct Printing Utility program supports PDF version 1.7 and below. For higher versions, you must open the file to print it. PrintingThere are several ways you can print using the Direct Printing Utility.1From the Start menu select Programs or All Programs .• For Windows 8, from Charms, select Search > Apps.2 Find Samsung Printers > Direct Printing Utility.3 Select your machine from the Select Printer drop-down list and click Browse.4 Select the file you wish to print and click Open.The file is added in the Select Files section.5 Customize the machine settings for your needs. 6 Click Print. The selected PDF file is sent to the machine.
Printing features2444. Special FeaturesUsing the right-click menu1Right-click on the PDF file to print and select Direct Printing.The Direct Printing Utility window appears with the PDF file is added.2 Select the machine to use.3 Customize the machine settings. 4 Click Print. The selected PDF file is sent to the machine.14 Mac printing Some features may not be available depending on models or options. It means that the features are not supported. Printing a documentWhen you print with a Mac, you need to check the printer driver settings in each application you use. Follow the steps below to print from a Mac:1Open the document to print.2 Open the File menu and click Page Setup (Document Setup in some applications).3 Choose your paper size, orientation, scaling, other options, and make sure that your machine is selected. Click OK.4 Open the File menu and click Print. 5 Choose the number of copies and indicate which pages to print. 6 Click Print.Changing printer settingsYou can use advanced printing features when using your machine.Open an application and select Print from the File menu. The machine name, which appears in the printer properties window, may differ depending on the machine in use. Except for the name, the composition of the printer properties window is similar to the following.Printing multiple pages on one sheet You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft copies.
Printing features2454. Special Features1Open an application, and select Print from the File menu.2 Select Layout from the drop-down list under Orientation. In the Pages per Sheet drop-down list, select the number of pages you want to print on one sheet of paper.3 Select the other options to use.4 Click Print. The machine prints the selected number of pages to print on one sheet of paper.Printing on both sides of the paper Some features may not be available depending on models or options. It means that the features are not supported (see "Features by models" on page 7). Before printing in the duplex mode, decide on which edge you will be binding your finished document. The binding options are, as follows:•Long-Edge Binding: This option is the conventional layout used in book binding.•Short-Edge Binding: This option is the type often used with calendars.1From your Mac application, select Print from the File menu.2 Select Layout from the drop-down list under Orientation. 3 Select a binding orientation from the Two-Sided option.4 Select the other options to use.5 Click Print and the machine prints on both sides of the paper. If you print more than 2 copies, the first copy and the second copy might print on the same sheet of paper. Avoid printing on both sides of paper when you are printing more than 1 copy.
Printing features2464. Special FeaturesUsing helpClick the question mark on the bottom-left corner of the window and click on the topic you want to know about. A pop-up window appears with information about that option's feature, which is provided from the driver. 15 Linux printing Some features may not be available depending on models or options. It means that the features are not supported. Printing from applicationsThere are a lot of Linux applications that allow you to print using Common UNIX Printing System (CUPS). You can print on your machine from any such application.1Open the document to print.2 Open the File menu and click Page Setup (Print Setup for someapplications).3 Choose your paper size, orientation, and makesure that your machine is selected. Click Apply.4 Open the File menu and click Print.5 Select your machine to print.6 Choose the number of copies and indicate which pages to print.7 Change other printing options in each tab, if necessary.8 Click Print. Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lpr printing system or other applications for odd-even printing (see "Features by models" on page 7).
Printing features2474. Special FeaturesPrinting filesYou can print text, image, pdf files on your machine using the standardCUPS directly from the command line interface. The CUPS lp or lpr utility allows you to do that. You can print these files by using below command format."lp -d <printer name> -o <option> <file name>"Please refer to lp or lpr man page on your system for more details.Configuring Printer PropertiesUsing the Printer Properties window provided by the Printers configuration, you can change the various properties for your machine as a printer.1Open the Unified Driver Configurator.If necessary, switch to Printers configuration.2 Select your machine on the available printers list and click Properties.3 The Printer Properties window appears.The following five tabs display at the top of the window:•General: Allows you to change the printer location and name. The name entered in this tab displays on the printer list in Printers configuration.•Connection: Allows you to view or select another port. If you change the machine port from USB to parallel or vice versa while in use, you must re-configure the machine port in this tab.•Driver: Allows you to view or select another machine driver. By clicking Options, you can set the default device options.•Jobs: Shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed jobs check box to see previous jobs on the job list.•Classes: Shows the class that your machine is in. Click Add to Class to add your machine to a specific class or click Remove from Class to remove the machine from the selected class.4 Click OK to apply the changes and close the Printer Properties window.
Printing features2484. Special Features16 Unix printing Some features may not be available depending on models or options. It means that the features are not supported (see "Features by models" on page 7). Proceeding the print jobAfter installing the printer, choose any of the image, text, PS or HPGL files to print.1Execute “printui <file_name_to_print>” command.For example, if you are printing “document1”printui document1This will open the UNIX Printer Driver Print Job Manager in which the user can select various print options.2 Select a printer that has been already added.3 Select the printing options from the window such as Page Selection.4 Select how many copies are needed in Number of Copies. To take advantage of the printer features provided by your printer driver, press Properties. 5 Press OK to start the print job.Changing the machine settingsThe UNIX printer driver Print Job Manager in which the user can select various print options in printer Properties.The following hot keys may also be used: “H” for Help, “O” for OK, “A” for Apply, and “C” for Cancel.General tab•Paper Size: Set the paper size as A4, Letter, or other paper sizes, according to your requirements.•Paper Type: Choose the type of the paper. Options available in the list box are Printer Default, Plain, and Thick.•Paper Source: Select from which tray the paper is used. By default, it is Auto Selection.•Orientation: Select the direction in which information is printed on a page.•Duplex: Print on both sides of paper to save paper
Printing features2494. Special Features Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lpr printing system or other applications for odd-even printing (see "Features by models" on page 7). •Multiple pages: Print several pages on one side of the paper.•Page Border: Choose any of the border styles (e.g., Single-line hairline, Double-line hairline)Image tabIn this tab, you can change the brightness, resolution, or image position of your document.Text tabSet the character margin, line space, or the columns of the actual print output.Margins tab•Use Margins: Set the margins for the document. By default, margins are not enabled. The user can change the margin settings by changing the values in the respective fields. Set by default, these values depend on the page size selected.•Unit: Change the units to points, inches, or centimeters.Printer-Specific Settings tabSelect various options in the JCL and General frames to customize various settings. These options are specific to the printer and depend on the PPD file.
2504. Special FeaturesScan features • For basic scanning features, refer to the Basic Guide (see "Basic scanning" on page 66).• This feature may not be available depending on model or optional goods (see "Features by models" on page 7).• The maximum resolution that can be achieved depends upon various factors, including computer speed, available disk space, memory, the size of the image being scanned, and bit depth settings. Thus,depending on your system and what you are scanning, you may not be able to scan at certain resolutions, especially using enhanced dpi. 17 Basic scanning method This feature may not be available depending on model or optional goods (see "Variety feature" on page 10). You can scan the originals with your machine via an USB cable or the network. The following methodoloqies can be used for scanning your documents:•Scan to PC: Scan the originals from the control panel. Then, the scanned data will be stored in the connected computers My Documents folder (see "Basic Scanning" on page 66).•TWAIN: TWAIN is the one of a preset imaging applications. Scanning an image launches the selected application, enabling you to control the scanning process. This feature can be used via the local connection or the network connection (see "Scanning from image editing program" on page 252).•Samsung Scan Assistant/ Easy Document Creator: You can use this program to scan images or documents. We recommend using scan features with the Samsung Easy Document Creator program provided in the supplied sofware CD.- See "Using Samsung Easy Document Creator" on page 276.- See "Scanning with Samsung Scan Assistant" on page 255.•WIA: WIA stands for Windows Images Acquisition. To use this feature, your computer must be connected directly with the machine via an USB cable (see "Scanning using the WIA driver" on page 253).
Scan features2514. Special Features18 Setting the scan settings in the computer This feature may not be available depending on model or optional goods (see "Features by models" on page 7). 1Open Samsung Easy Printer Manager (see "Using Samsung Easy Printer Manager" on page 282).2 Select the appropriate machine from the Printer List.3 Select Scan to PC Settings menu.4 Select the option you want.•Scan Activation: Determines whether or not scanning is enabled on the device.•Profile: Displays the scanning profiles saved on theGselected device.•Basic tab: Contains settings related to general scan and deviceGsettings.•Image tab: Contains settings related to image altering.5 Press Save > OK.19 Scanning from network connected machineMake sure the printer driver is installed on your computer using the software CD, since the printer driver includes the scan program (see "Installing the driver locally" on page 28).1Place a single document (see "Loading originals" on page 51).2 Select (Scan) > Scan to PC > Network PC on the control panel.Or select Scan to button > Scan to PC > Network PC on the control panel. If you see Not Available message, check the port connection.
Scan features2524. Special Features3 Select your registered computer ID, and enter the Password if necessary. •ID is the same ID as the registered scan ID for 5COUWPI'CU[2TKPVGT/CPCIGT! Switch to advanced mode!Scan to 2% Settings.•Password is the 4 digit number registered password for 5COUWPI'CU[2TKPVGT/CPCIGT! Switch to advanced mode!Scan to 2% Settings. 4 Select the option you want and press OK.5 Scanning begins. Scanned image is saved in computer’s C:\Users\users name\Pictures\folder. The saved folder may differ, depending on your operating system or the application you are using. 20 Scanning from image editing programYou can scan and import documents at the image editing software such as Adobe Photoshop, if the software is TWAIN-compliant. Follow the steps below to scan with TWAIN-compliant software:1Make sure that the machine is connected to your computer and powered on.2 Place a single document (see "Loading originals" on page 51).3 Open an application, such as Adobe Photoshop.4 Click File > Import, and select the scanner device.5 Set the scan options.6 Scan and save your scanned image.
Scan features2534. Special Features21 Scanning using the WIA driverYour machine supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is one of the standard components provided by Microsoft Windows 7 and works with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and easily adjust images without using additional software: The WIA driver works only on Windows OS with a USB port. 1Make sure that the machine is connected to your computer and powered on.2 Place a single document (see "Loading originals" on page 51).3 Click Start > Control Panel > Hardware and Sound > Devices and Printers.4 Right-click on device driver icon in Printers and Faxes > Start Scan.5 New Scan application appears.6 Choose your scanning preferences and click Preview to see your preferences affect the picture.7 Scan and save your scanned image.
Scan features2544. Special Features22 Scanning with Samsung Easy Document CreatorSamsung Easy Document Creator is an application to help users scan, compile, and save documents in multiple formats, including .epub format.We recommend using scan features with the Samsung Easy Document Creator program provided in the supplied sofware CD. • Availabe for Windows OS users only.• Windows XP or higher and Internet Explorer 6.0 or higher is the minimum requirement for Samsung Easy Document Creator.•Samsung Easy Document Creator is installed automatically when you install the machine software. •Samsung Easy Document Creator offers variety feature such as Quick Scan, Social Networking Site, and E-BooK (see "Using Samsung Easy Document Creator" on page 276). 1Place a single document (see "Loading originals" on page 51).2 From the Start menu select Programs or All Programs .• For Windows 8, from Charms, select Search > Apps.3 Samsung Printers > Samsung Easy Document Creator > Samsung Easy Document Creator.Click Scan ( ) from the home screen.4 Select the type of scanning or a favorites then click Start.5 Make adjustments to the image (Scan Settings and More Options).6 Click Scan to scan a final image or Prescan to get another preview image.
Scan features2554. Special Features7 Select to Save to Location, Send to E-mail, or Send to SNS.8 Click on Save (Saving a Scan), Send ( E-mailing a Scan), or Share (Uploading). If there is room on the document glass, more than one item can be scanned at the same time. Use the tool to make multiple selection areas. 23 Scanning with Samsung Scan Assistant • This feature may not be available depending on model or optional goods (see "Features by models" on page 7).• For Windows, you need to download Scan Assistant from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads).For Mac, open the Applications folder > Samsung folder > Samsung Scan Assistant.• For Windows, you can use the OCR (Optical Character Reader) feature from Samsung Scan Assistant program. 1Download the software from the Samsung website then unpack and install it.2 Make sure that the machine is connected to your computer and powered on.3 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).4 From the Start menu select Programs or All Programs .• For Windows 8, from Charms, select Search > Apps. Select the Help menu or click the button from the window and click on any option you want to know about. 5 Set the scan options.6 Click Scan.
Scan features2564. Special Features24 Mac scanningScanning from USB connected machine1Make sure that the machine is connected to your computer and powered on.2 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).3 Start Applications and click Image Capture. If No Image Capture device connected message appears, disconnect the USB cable and reconnect it. If the problem continues, refer to the Image Capture’s help. 4 Select the option you want. 5 Scan and save your scanned image. If scanning does not operate in Image Capture, update Mac OS to the latest version. Scanning from network connected machine Network or wireless model only (see "Features by models" on page 7). 1Make sure that your machine is connected to a network.2 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).3 Start Applications and click Image Capture. 4 According to OS, follow steps below. • For 10.5-Click Devices > Browse Devices on Menu bar.- Make sure that Connected checkbox is checked beside your machine in Bonjour Devices.•For 10.6-10.8, select your device below SHARED.5 Set the scan options on this program.6 Scan and save your scanned image.
Scan features2574. Special Features • If scanning does not operate in Image Capture, update Mac OS to the latest version. • For more information, refer to the Image Capture’s help.• You can also scan using TWAIN-compliant software, such as Adobe Photoshop. 25 Linux scanningScanning1Make sure that the machine is connected to your computer and powered on.2 Double-click the Unified Driver Configurator on your desktop. 3 Click the button to switch to Scanners Configuration. 4 Select the scanner on the list.5 Click Properties. 6 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).7 From the Scanner Properties window, click Preview.
2584. Special Features8 The document is scanned and the image preview appears in the Preview Pane.9 Drag the pointer to set the image area to be scanned in the Preview Pane.10 Select the option you want. 11 Scan and save your scanned image. For later use, you can save as your scan settings and add it to the Job Type drop-down list. Editing an image with Image ManagerThe Image Manager application provides you with menu commands and tools to edit your scanned image.
Fax features2594. Special FeaturesFax features • For basic faxing features, refer to the Basic Guide (see "Basic faxing" on page 67).• M267xN/M287xND does not support fax features. 26 Automatic redialingWhen the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number. The redial time depends on the country's factory default setting. When the display shows Retry Redial?, press (Start) button to redial the number without waiting. To cancel the automatic redialing, press (Stop/Clear). To change the time interval between redials and the number of redial attempts.1Press (fax) > (Menu)> Fax Setup > Sending on the control panel.2 Select Redial Times or Redial Term you want.3 Select the option you want.27 Redialing the fax number1Press (Redial/Pause) button on the control panel. 2 Select the fax number you want.Ten recently sent fax numbers with ten received Caller IDs are shown.3 When an original is loaded in the document feeder, the machine automatically begins to send.If an original is placed on the scanner glass, select Yes to add another page. Load another original and press OK. When you have finished, select No when Another Page? appears.28 Confirming a transmissionWhen the last page of your original has been sent successfully, the machine beeps and returns to ready mode.When something goes wrong while sending your fax, an error message appears on the display. If you receive an error message, press (Stop/Clear) to clear the message and try to send the fax again.
Fax features2604. Special Features You can set your machine to print a confirmation report automatically each time sending a fax is completed. Press (fax) > (Menu) > System Setup > Report > Fax Confirm. on the control panel. 29 Sending a fax in the computer This feature may not be available depending on model or optional goods (see "Features by models" on page 7). You can send a fax from your computer without going to the machine.To send a fax from your computer, the Samsung Network PC Fax program must be installed. This program will be installed when you installed the printer driver. 1Open the document to be sent.2 Select Print from the File menu. The Print window will be displayed. It may look slightly different depending on your application.3 Select Samsung Network PC Fax from the Print window4 Click Print or OK.5 Enter the recipients’ numbers and select the option Select the Help menu or click the button from the window and click on any option you want to know about. 6 Click Send.
Fax features2614. Special Features30 Delaying a fax transmissionYou can set your machine to send a fax at a later time when you will not be present. You cannot send a color fax using this feature.1Place a single document face down on the document glass, or load the documents face up into the document feeder.2 Press (fax) on the control panel.3 Adjust the resolution and the darkness to suit your fax needs.4 Press (Menu) > Fax Feature > Delay Send on the control panel.5 Enter the number of the receiving fax machine and press OK.6 The display asks you to enter another fax number to send the document.7 To enter more fax numbers, press OK when Yes highlights and repeat steps 5. • You can add up to 10 destinations.• Once you entered a group dial number, you cannot enter another group dial numbers anymore. 8 Enter the job name and the time. If you set a time earlier than the current time, the fax will be sent at that time on the following day. 9 The original is scanned into memory before transmission.The machine returns to ready mode. The display reminds you that you are in ready mode and that a delayed fax is set. You can check the list of delayed fax jobs.Press (Menu) > System Setup > Report > Schduled Jobs on the control panel. Adding documents to a reserved fax1Place a single document face down on the document glass, or load the documents face up into the document feeder.2 Press (fax) > (Menu) > Fax Feature > Add Pages on the control panel.3 Select the fax job and press OK.When you have finished, select No when Another Page? appears. The machine scans the original into memory.4 Press (Stop/Clear) to return to ready mode.
Fax features2624. Special FeaturesCanceling a reserved fax job1Press (fax) > (Menu) > Fax Feature > Cancel Job on the control panel.2 Select the fax job you want and press OK.3 Press OK when Yes highlights.The selected fax is deleted from memory.4 Press (Stop/Clear) to return to ready mode.31 Sending a priority faxThis function is used when a high priority fax need to be sent ahead of reserved operations. The original is scanned into memory and immediately transmitted when the current operation is finished.1Place a single document face down on the document glass, or load the documents face up into the document feeder.2 Press (Fax) > (Menu) > Fax Feature > Priority Send on the control panel.3 Enter the destination fax number and press OK.4 Enter the job name and press OK.5 If an original is placed on the scanner glass, select Yes to add another pages. Load another original and press OK.When you have finished, select No when Another Page? appears.The machine starts to scan and send a fax to destinations.32 Forwarding a sentGfax to another destinationYou can set the machine to forward the sent fax to other destination by a fax. If you are out of office but have to receive the fax, this feature may be useful. • Though you sent or received a color fax, the data is forwarded in grayscale.
Fax features2634. Special Features1Place a single document (see "Loading originals" on page 51).2 Press (fax) > (Menu) > Fax Feature > Send Forward > Forward to Fax > On on the control panel. Forward options may not be available depending on model or optional goods (see "Variety feature" on page 10). 3 Enter the destination fax number, email address, or server address and press OK.4 Press (Stop/Clear) to return to ready mode.Subsequent sent faxes will be forwarded to the specified fax machine.33 Forwarding a received faxYou can set the machine to forward the received fax to other destination by a fax or a PC. If you are out of office but have to receive the fax, this feature may be useful. Though you sent or received a color fax, the data is forwarded in grayscale. 1Press (fax) > (Menu) > Fax Feature > Rcv. Forward > Forward to Fax, or Forward to PC > On on the control panel. Forward options may not be available depending on model or optional goods (see "Variety feature" on page 10). 2 To set the machine to print out a fax when fax forwarding has been completed, select Forward & Print. 3 Enter the destination fax number, email address, or server address and press OK.4 Enter the starting tim and ending time, then press OK.5 Press (Stop/Clear) to return to ready mode.Subsequent sent faxes will be forwarded to the specified fax machine.
Fax features2644. Special Features34 Changing the receive modes1Press (fax) > (Menu) > Fax Setup > Receiving > Receive Mode on the control panel.2 Select the option you want. •Fax: Answers an incoming fax call and immediately goes into the fax reception mode.•Tel: Receives a fax by pressing (On Hook Dial) and then (Start) •Ans/Fax: Is for when an answering machine attached to your machine. Your machine answers an incoming call, and the caller can leave a message on the answering machine. If the fax machine senses a fax tone on the line, the machine automatically switches to Fax mode to receive the fax. To use the Ans/Fax mode, attach an answering machine to the EXT socket on the back of your machine. •DRPD: you can receive a call using the Distinctive Ring Pattern Detection (DRPD) feature. Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. For further details, see "Receiving faxes using DRPD mode" on page 265. This setting may not be available depending on your country. 3 Press OK.4 Press (Stop/Clear) to return to ready mode.35 Receiving manually in Tel modeYou can receive a fax call by pressing (On Hook Dial) button and then pressing (Start) when you hear a fax tone. If your machine has a handset, you can answer calls using the handset (see "Features by models" on page 7).36 Receiving in Answering Machine/Fax modeTo use this mode, you must attach an answering machine to the EXT socket on the back of your machine. If the caller leaves a message, the answering machine stores the message. If your machine detects a fax tone on the line, it automatically starts to receive the fax.
Fax features2654. Special Features • If you have set your machine to this mode and your answering machine is switched off, or no answering machine is connected to EXT socket, your machine automatically goes into Fax mode after a predefined number of rings.• If the answering machine has a user-selectable ring counter, set the machine to answer incoming calls within 1 ring.• If the machine is in Tel mode, disconnect or switch off the answering machine with the fax machine. Otherwise, the outgoing message from the answering machine will interrupt your phone conversation. 37 Receiving faxes with an extension telephoneWhen you are using an extension telephone connected to the EXT socket, you can receive a fax from someone you are talking to on the extension telephone, without going to the fax machine.When you receive a call on the extension phone and hear fax tones, press the keys *9* on the extension phone. The machine receives the fax.*9* is the remote receive code preset at the factory. The first and the last asterisks are fixed, but you can change the middle number to whatever you want. While you are talking over the telephone connected to the EXT socket, copy and scan features are not available. 38 Receiving faxes using DRPD modeDistinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. This feature is often used by answering services who answer telephones for many different clients and need to know which number someone is calling in on to properly answer the phone.1Select (fax) > (Menu) > Fax Setup > Receiving > DRPD > Waiting Ring on the control panel. 2 Call your fax number from another telephone. 3 When your machine begins to ring, do not answer the call. The machine requires several rings to learn the pattern.When the machine completes learning, the display shows Completed DRPD Setup. If the DRPD setup fails, Error DRPD Ring appears.4 Press OK when DRPD appears and start over from step 2. • DRPD must be set up again if you re-assign your fax number, or connect the machine to another telephone line.• After DRPD has been set up, call your fax number again to verify that the machine answers with a fax tone. Then have a call placed to a different number assigned to that same line to be sure the call is forwarded to the extension telephone or answering machine plugged into the EXT socket.
Fax features2664. Special Features39 Receiving in secure receiving mode This feature may not be available depending on model or optional goods (see "Features by models" on page 7). You may need to prevent your received faxes from being accessed by unauthorized people. Turn on secure receiving mode, then all incoming faxes go into memory. You can print the incoming faxes with entering the password. To use the secure receiving mode, activate the menu from (fax) > (Menu) > Fax Feature > Secure Receive on the control panel. Printing received faxes1Select (fax) > (Menu) > Fax Feature > Secure Receive > Print on the control panel. 2 Enter a four-digit password and press OK. 3 The machine prints all of the faxes stored in memory.40 Printing faxes on both sides of the paper • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.• This feature may not be available depending on model or optional goods (see "Features by models" on page 7). 1Place a single document face down on the document glass, or load the documents face up into the document feeder.2 Press (fax) > (Menu) > Fax Setup > Receiving > Duplex Print on the control panel.•Off: Prints in Normal mode.•Long Edge: Prints pages to be read like a book.•Short Edge: Prints pages to be read by flipping like a note pad.253
Fax features2674. Special Features3 Press OK.4 Press (Stop/Clear) to return to ready mode.41 Receiving faxes in memorySince your machine is a multi-tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax. If fax is received and being printed, other copy and print jobs cannot be processed at the same time. 42 Printing sent fax report automatically You can set the machine to print a report with detailed information about the previous 50 communication operations, including time and dates.1Press (fax) > (Menu) > System Setup > Report > Fax Sent on the control panel.2 Press (Stop/Clear) to return to ready mode.
5. Useful Management ToolsThis chapter introduces management tools provided to help you make full use of your machine. • Accessing management tools 269• Samsung AnyWeb Print 271• Easy Eco Driver 272• Using SyncThru™ Web Service 273• Using Samsung Easy Document Creator 276• Using Samsung Easy Printer Manager 282• Using Samsung Printer Status 285• Using Samsung Printer Experience 287• Using the Linux Unified Driver Configurator 293
2695. Useful Management ToolsAccessing management toolsSamsung provides a variety of management tools for Samsung printers. 1Make sure that the machine is connected to your computer and powered on.2 From the Start menu, select Programs or All Programs.• For Windows 8, from the Charms, select Search > Apps.3 Find Samsung Printers.4 Under Samsung Printers, you can see installed management tools.5 Click the management tool you want to use. • After installing the driver, for some management tools, you can access them directly from the Start menu > Programs or All Programs.• For Windows 8, after installing the driver, for some management tools, you can access them directly from the Start screen by clicking on the corresponding tile.
2705. Useful Management ToolsEasy Capture Manager • Available for Windows OS users only.• This feature may not be available depending on model or optional goods (see "Software" on page 7). Capture your screen and launch Easy Capture Manager by simply pressing the Print Screen key. Now you can easily print your captured screen as captured or edited.
2715. Useful Management ToolsSamsung AnyWeb Print • This feature may not be available depending on model or optional goods (see "Software" on page 7).• Available for Windows OS users only. This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. Download the software from the Samsung website then unpack and install it: (http://www. samsung.com > find your product > Support or Downloads).
2725. Useful Management ToolsEasy Eco Driver • This feature may not be available depending on model or optional goods (see "Software" on page 7).• Available for Windows OS users only (see "Software" on page 7). With the Easy Eco Driver, you can apply Eco features to save paper and toner before printing. To use this application, Start Easy Eco Driver before printing job checkbox in the printer properties should be checked. Easy Eco Driver also allows you simple editing such as removing images and texts, changing fonts, and more. You can save frequently used settings as a preset.How to use: 1 Open a document to print.2 Print the document.A preview window appears.3 Select the options you want to apply to the document.You can see the preview of the applied features.4 Click Print.
2735. Useful Management ToolsUsing SyncThru™ Web Service • Internet Explorer 6.0 or higher is the minimum requirement for SyncThru™ Web Service.•SyncThru™ Web Service explanation in this user’s guide may differ from your machine depending on its options or models.• Network model only (see "Software" on page 7). 1 Accessing SyncThru™ Web Service1Access a web browser, such as Internet Explorer, from Windows.Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.2 Your machine’s embedded website opens.Logging into SyncThru™ Web ServiceBefore configuring options in SyncThru™ Web Service, you need to log-in as an administrator. You can still use SyncThru™ Web Service without logging in but you won’t have access to Settings tab and Security tab. 1Click Login on the upper right of the SyncThru™ Web Service website.2 Type in the ID and Password then click Login.•ID: admin •Password: sec000002 SyncThru™ Web Service overview Some tabs may not appear depending on your model. Information tabThis tab gives you general information about your machine. You can check things, such as remaining amount of toner. You can also print reports, such as an error report.•Active Alerts: Shows the alerts that have occurred in the machine and their severity.•Supplies: Shows how many pages are printed and amount of toner left in the cartridge.
Using SyncThru™ Web Service2745. Useful Management Tools•Usage Counters: Shows the usage count by print types: simplex and duplex.•Current Settings: Shows the machine’s and network’s information. •Print information: Prints reports such as system related reports, e-mail address, and font reports.Settings tabThis tab allows you to set configurations provided by your machine and network. You need to log-in as an administrator to view this tab. •Machine Settings tab: Sets options provided by your machine. •Network Settings tab: Shows options for the network environment. Sets options such as TCP/IP and network protocols. Security tabThis tab allows you to set system and network security information. You need to log-in as an administrator to view this tab.•System Security: Sets the system administrator’s information and also enables or disables machine features.•Network Security: Sets settings for IPSec, and IPv4/IPv6 filtering.Maintenance tabThis tab allows you to maintain your machine by upgrading firmware and setting contact information for sending emails. You can also connect to Samsung website or download drivers by selecting the Link menu.•Firmware Upgrade: Upgrade your machine’s firmware.•Contact Information: Shows the contact information.•Link: Shows links to useful sites where you can download or check information.3 E-mail notification setupYou can receive emails about your machine’s status by setting this option. By setting information such as IP address, host name, e-mail address and SMTP server information, the machine status (toner cartridge shortage or machine error) will be sent to a certain person's e-mail automatically. This option may be used more frequently by a machine administrator. 1Start a web browser, such as Internet Explorer, from Windows.Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.2 Your machine’s embedded website opens.3 From the Settings tab, select Machine Settings > E-mail Notification.
Using SyncThru™ Web Service2755. Useful Management Tools If you have not configured outgoing server environment, go to Settings > Network Settings > Outgoing Mail Server(SMTP) to configure network environment before setting e-mail notification. 4 Select Enable check box to use the E-mail Notification.5 Click Add button to add e-mail notification user. Set the recipient name and e-mail address(es) with notification items you want to receive an alert for.6 Click Apply. If the firewall is activated, the e-mail may not be sent successfully. In that case, contact the a network administrator. 4 Setting the system administrator’s informationThis setting is necessary for using the e-mail notification option.1Start a web browser, such as Internet Explorer, from Windows.Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.2 Your machine’s embedded website opens.3 From the Security tab, select System Security > System Administrator4 Enter the name of the administrator, phone number, location, and email address. 5 Click Apply.
2765. Useful Management ToolsUsing Samsung Easy Document CreatorSamsung Easy Document Creator is an application to help users scan, compile, and save documents in multiple formats, including .epub format. These documents can be shared via social networking sites or fax. Whether you’re a student needing to organize research from the library or a stay-at-home mom sharing scanned pictures from last year’s birthday party, Easy Document Creator will provide you with the necessary tools. • Availabe for Windows OS users only.• Windows XP or higher and Internet Explorer 6.0 or higher is the minimum requirement for Samsung Easy Document Creator.•Samsung Easy Document Creator is installed automatically when you install the machine software. 5 Understanding Samsung Easy Document CreatorTo open the program: Select Start > Programs or All Programs > Samsung Printers > Samsung Easy Document Creator > Samsung Easy Document Creator.The Samsung Easy Document Creator interface is comprised of various basic sections as described in the table that follows: The screenshot may differ depending on operating system you are using. 1 (Information)Click the information button to see the program’s version information. (Help)Click the help button to get the information of any option you want to use.
Using Samsung Easy Document Creator2775. Useful Management Tools2Quick Scan Automatically scans with the settings provided in Configuration. You can pre-set the options such as image type, document size, resolution, or file type (see "Quick Scanning" on page 278).3Scan Provides more in-depth options for scanning documents on a one-by-one basis (see "Scanning" on page 278). Text Converting will only be available after installing the optical character recognition (OCR) software proivided in a separate installation file. •Image Scanning: Use for scanning single or mulitple pictures.•Document Scanning: Use for scanning documents with text or text and images.•Text Converting: Use for scanning documents that need to be saved in an editable text format.•Book Scanning: Use for scanning books with the flatbed scanner.•Favorites: User-created favorites for frequently-used scan settings.4SNS Upload Provides an easy and quick way to upload files to a variety of social networking sites (SNS). Scan an image directly or select an existing image to upload to Facebook, Flickr, Picasa, Google Docs, or Twitter (see "Scanning to a Social Networking Site" on page 279). SNS Upload will only be available after Microsoft®.NET Framework 3.5 Service Pack 1 has been installed (http://www.microsoft.com/download/en/details.aspx?id=22) and Windows XP or higher and Internet Explorer 7.0 or higher are required 5E-Book ConversionProvides the ability to scan multiple documents in as one e-book or convert existing files into an e-book format (.epub file) (see "Converting to an E-Book" on page 280).6Send Fax Provides the ability to directly fax a document from Easy Document Creator if the Samsung Network PC Fax driver is installed (see "Sending a fax in the computer" on page 260). If the Samsung Network PC Fax driver is not installed, this will be grayed out. 7Configuration Provides the options for a Common and Quick Scan.8Device Name Shows the scanning/faxing device ready to use.
Using Samsung Easy Document Creator2785. Useful Management Tools Click the Help ( ) button from the upper-right corner of the window and click on any option you want to know about. 6 Using featuresScanning1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).2 Click Scan from the home screen.3 Select the type of scanning or a favorites then click Start.4 Make adjustments to the image (Scan Settings and More Options).5 Click Scan to scan a final image or Prescan to get another preview image.6 Select to Save to Location, Send to E-mail, or Send to SNS.7 Click on Save (Saving a Scan), Send ( E-mailing a Scan), or Share (Uploading). If there is room on the document glass, more than one item can be scanned at the same time. Use the tool to make multiple selection areas. Quick ScanningConfiguring Quick ScanTo set up the Quick Scan options:1Click Configuration from the home screen.2 Click on Default to use the default settings, or select your own options.3 Click Apply to save changes.9Search If you cannot see any device ready to use, click this button to find a device. Click Search Now to automatically search for all devices to which you have access.
Using Samsung Easy Document Creator2795. Useful Management ToolsUsing Quick Scan1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).2 Click Quick Scan from the home screen.3 Select a save location for the scanned images.4 Click Save to save the image. Click Scan More to scan another image with the same settings. Scanning to a Social Networking SiteScan Directly1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).2 Click SNS Upload from the home screen.3 Click Scan to SNS > Start.4 Click Scan.Upload Existing File1Click SNS Upload from the home screen.2 Click Existing File to SNS > Start.3 Select the site and click Add Image to find the file to upload.4 Select a social networking site to send the image and click Next. 5 Follow the instructions in each social networking site.•Facebooka Sign-in to your account.b Select the upload location.c Click Upload.•Flickra Sign-in to your account.b Click Upload.•Google Docs and Picasaa If this is your first time uploading to Google Docs, click Grant access.b Select the upload location.
Using Samsung Easy Document Creator2805. Useful Management Toolsc Click Upload.•Twittera If it is your first time uploading to the SNS, you will have to sign-in to Twitter and authorize the application by clicking Authorize app.b Click Upload. If there are some problems on accessing or uploading to each SNS site due to a network environment issue, it's needed to check security limitations established in your network with network administrator. To guarantee correct functioning of SNS upload in Samsung Easy Document Creator, unrestricted network environment is needed for HTTPS communication. Converting to an E-BookScan Directly1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).2 Click E-Book Conversion from the home screen.3 Click Scan to E-Book > Start.4 Enter a name and author to be used as metatag information for the .epub file, a file name, and select a save location.5 Click Save.Convert Existing Files1Click E-Book Conversion from the home screen.2 Click Existing File to E-Book > Start.3 Click Add Image to find the file to convert.4 Enter a name and author to be used as metatag information for the .epub file, a file name, and select a save location.5 Click Save.Sending a Fax1Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 51).2 Click Send Fax from the home screen.3 Click add file and locate the file to fax.4 Click Send Fax.
Using Samsung Easy Document Creator2815. Useful Management Tools5 Enter the fax information (recipient’s number, cover page information, etc).6 Click Send.7 Plug-insEasy Document Creator will also create new plug-ins for Microsoft PowerPoint, Word, and Excel. These new plug-ins will be in a new Easy Document Creator menu on the applications’ menu bars: Scan to Office, Send Fax, and E-Book.
2825. Useful Management ToolsUsing Samsung Easy Printer Manager • This feature may not be available depending on model or optional goods (see "Software" on page 7).• Available for Windows and Mac OS users only (see "Software" on page 7).• For Windows, Internet Explorer 6.0 or higher is the minimum requirement for Samsung Easy Printer Manager. Samsung Easy Printer Manager is an application that combines Samsung machine settings into one location. Samsung Easy Printer Manager combines device settings as well as printing environments, settings/actions and launching. All of these features provide a gateway to conveniently use your Samsung machine. Samsung Easy Printer Manager provides two different user interfaces for the user to choose from: the basic user interface and the advanced user interface. Switching between the two interfaces is easy: just click a button.8 Understanding Samsung Easy Printer ManagerTo open the program: For Windows,Select Start > Programs or All Programs > Samsung Printers > Samsung Easy Printer Manager > Samsung Easy Printer Manager.• For Windows 8, from Charms, select Search > Apps> Samsung Printers > Samsung Easy Printer Manager > Samsung Easy Printer Manager.For Mac,Open the Applications folder > Samsung folder > Samsung Easy Printer Manager.The Samsung Easy Printer Manager interface is comprised of various basic sections as described in the table that follows: The screenshot may differ depending on operating system you are using. 1Printer list The Printer List displays printers installed on your computer and network printers added by network discovery (Windows only).
Using Samsung Easy Printer Manager2835. Useful Management Tools Select the Help menu or click the button from the window and click on any option you want to know about. 9 Advanced settings user interface overviewThe advanced user interface is intended to be used by the person responsible for managing the network and machines.2Printer informationThis area gives you general information about your machine. You can check information, such as the machine’s model name, IP address (or Port name), and machine status. You can view the online User’s Guide. Troubleshooting button: This button opens the Troubleshooting Guide when an error occurs. You can directly open the necessary section in the user’s guide. 3Application informationIncludes links for changing to the advanced settings, preference, help, and about. The button is used to change the user interface to the advanced settings user interface (see "Advanced settings user interface overview" on page 283). 4Quick links Displays Quick links to machine specific functions. This section also includes links to applications in the advanced settings. If you connect your machine to a network, the SyncThru™ Web Service icon is enabled. 5Contents area Displays information about the selected machine, remaining toner level, and paper. The information will vary based on the machine selected. Some machines do not have this feature.6Order supplies Click on the Order button from the supply ordering window. You can order replacement toner cartridge(s) from online.
Using Samsung Easy Printer Manager2845. Useful Management Tools Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. Device SettingsYou can configure various machine settings such as machine setup, paper, layout, emulation, network, and print information.Scan to PC SettingsThis menu includes settings to create or delete scan to PC profiles. •Scan Activation: Determines whether or not scanning is enabled on the device.•Profile: Displays the scanning profiles saved on theGselected device.•Basic tab: Contains settings related general scan and deviceGsettings.•Image tab: Contains settings related to image altering.Fax to PC SettingsThis menu includes settings related to the basic fax functionality of the selected device. •Disable: If Disable is On, incoming faxes will not be received on this device.•Enable Fax Receiving from Device: Enables faxing on the device and allow more options to be set.Alert Settings (Windows only)This menu includes settings related to error alerting. •Printer Alert: Provides settings related to when alerts will be received.•Email Alert: Provides options relating to receiving alerts via email.•Alert History: Provides a history of device and toner related alerts.Job AccountingProvides querying of quota information of the specified job accounting user. This quota information can be created and applied to devices by job accounting software such as SyncThru™ or CounThru™ admin software.
2855. Useful Management ToolsUsing Samsung Printer Status The Samsung Printer Status is a program that monitors and informs you of the machine status. • The Samsung Printer Status window and its contents shown in this user’s guide may differ depending on the machine or operating system in use.• Check the operating system(s) that are compatible with your machine (see "Specifications" on page 123).• Available for Windows OS users only (see "Software" on page 7). 10 Samsung Printer Status overviewIf an error occurs while operating, you can check the error from the Samsung Printer Status. Samsung Printer Status is installed automatically when you install the machine software. You can also launch Samsung Printer Status manually. Go to the Printing Preferences, click the Basic tab > Printer Status button.These icons appear on the Windows task bar:Icon Mean DescriptionNormal The machine is in ready mode and experiencing no errors or warnings.Warning The machine is in a state where an error might occur in the future. For example, it might be in toner low status, which may lead to toner empty status. Error The machine has at least one error.1Toner Level You can view the level of toner remaining in each toner cartridge. The machine and the number of toner cartridge(s) shown in the above window may differ depending on the machine in use. Some machines do not have this feature.2Option You can set printing job alert related settings.
Using Samsung Printer Status2865. Useful Management Tools3Order Supplies You can order replacement toner cartridge(s) from online.4User’s Guide You can view the online User’s Guide. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. 5Close Close the window.
2875. Useful Management ToolsUsing Samsung Printer Experience Samsung Printer Experience is a Samsung application that combines Samsung machine settings and machine management into one location. You can set device settings, order supplies, open troubleshooting guides, visit Samsung’s web site, and check connected machine information. This application will be automatically downloaded from the Windows Store if the machine is connected to a computer with an Internet connection. 11 Understanding the Samsung Printer ExperienceTo open the application, From the Start screen, select the Samsung Printer Experience ()Gtile. The Samsung Printer Experience interface comprises various useful features as described in the following table: The screenshot may differ depending on the model you are using. 1Printer InformationThis area gives you general information about your machine. You can check information, such as the machine’s status, location, IP address, and remaining toner level.126345
Using Samsung Printer Experience2885. Useful Management Tools12 Printing from Windows 8This section explains common printing tasks from the Start screen.Basic printing1Open the document to print.2 From the Charms, select Devices.3 Select your printer from the list4 Select the printer settings, such as the number of copies and orientation.2User Guide You can view the online User’s Guide. You need to be connected to the Internet to use this feature. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. 3Order SuppliesClick on this button to order replacement toner cartridges online. You need to be connected to the Internet to use this feature. 4Visit Samsung Links to Samsung printer website. You need to be connected to the Internet to use this feature.5Printer Settings You can configure various machine settings such as machine setup, paper, layout, emulation, networking, and print information through SyncThru™ Web Service. Your machine needs to be connected to a network. This button will be disabled if your machine is connected via USB cable.6Device List & Latest Scanned ImageThe scan list displays devices that supports Samsung Printer ExperienceU Under the device, you can see the latest scanned images. Your machine needs to be connected to a network to scan from here. This section is for the users with multi-functional printers.
Using Samsung Printer Experience2895. Useful Management Tools5 Click the Print button to start the print job. Cancelling a print jobIf the printing job is waiting in the print queue or print spooler, cancel the job as follows:• You can access this window by simply double-clicking the machine icon ( ) in the Windows task bar. • You can also cancel the current job by pressing (Stop/Clear) button on the control panel.Opening more settings The screen may appear somewhat different depending on the model or options. You can set up more printing parameters.1Open the document you want to print.2 From the Charms, select Devices.3 Select your printer from the list4 Click More settings.
Using Samsung Printer Experience2905. Useful Management ToolsBasic tabBasicThis option allows you to choose the basic printing settings such as copies, orientation, and document type.Eco settingsThis option allows you to choose multiple pages per side to save media.Advanced tabPaper settingsThis option allows you to set the basic paper handling specifications.Layout settingsThis option allows you to set the various ways to layout your documents.
Using Samsung Printer Experience2915. Useful Management ToolsSecurity tab Some features may not be available depending on the model or options. If this tab is not shown or disabled, it means that this features are not supported. Job AccountingThis option allows you to print with the given permission.Confidential PrintingThis option is used for printing confidential documents. You need to enter a password to print using it.13 Scanning from Windows 8 This section is for the users with multi-functional printers. Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer.Scanning from Samsung Printer ExperienceThe most frequently used printing menus are displayed for quick scanning.1Place a single document face down on the document glass, or load the documents face up into the document feeder.2 Click the Samsung Printer Experience tile on the Start screen.3 Click Scan ().4 Set up the scanning parameters such as image type, document size, and resolution.5 Click Prescan ( )to check the image.6 Adjust the prescanned image with scanning operation functions such as rotate and mirror.
Using Samsung Printer Experience2925. Useful Management Tools7 Click Scan ( )and save the image. • When you place the originals in the ADF (or DADF), Prescan ( ) is not available.• You can skip step 5, if the Prescan option is selected.
2935. Useful Management ToolsUsing the Linux Unified Driver ConfiguratorThe Unified Driver Configurator is a tool primarily intended for configuring machine devices. You need to install Unified Linux Driver to use Unified Driver Configurator (see "Installation for Linux" on page 154).After the driver is installed on your Linux system, the Unified Driver Configurator icon will automatically be created on your desktop.14 Opening Unified Driver Configurator1Double-click the Unified Driver Configurator on the desktop.You can also click the Startup Menu icon and select Samsung Unified Driver > Unified Driver Configurator.2 Click each button on the left to switch to the corresponding configuration window.1Printer Configuration 2Port Configuration
Using the Linux Unified Driver Configurator2945. Useful Management Tools To use the on screen help, the Help or button from the window. 3 After changing the configurations, click Exit to close the Unified Driver Configurator.15 Printers configurationPrinters configuration has the two tabs: Printers and Classes.Printers tabView the current system’s printer configuration by clicking on the machine icon button on the left side of the Unified Driver Configurator window.1Switches to Printers configuration.2Shows all of the installed machines.3Shows the status, model name, and URI of your machine.
Using the Linux Unified Driver Configurator2955. Useful Management ToolsThe printer control buttons are, as follows:•Refresh: Renews the available machines list.•Add Printer: Allows you to add a new machines.•Remove Printer: Removes the selected machine.•Set as Default: Sets the current selected machine as a default machine.•Stop/Start: Stops/starts the machine.•Test: Allows you to print a test page to ensure the machine is working properly.•Properties: Allows you to view and change the printer’s properties. Classes tabThe Classes tab shows a list of available machine classes.•Refresh: Renews the classes list.•Add Class: Allows you to add a new machine class.•Remove Class: Removes the selected machine class.1Shows all of the machine classes.2Shows the status of the class and the number of machines in the class.
Using the Linux Unified Driver Configurator2965. Useful Management Tools16 Ports configurationIn this window, you can view the list of available ports, check the status of each port and release a port that is stalled in a busy state when its owner has terminated the job for any reason. •Refresh: Renews the available ports list.•Release port: Releases the selected port.1Switches to Ports configuration.2Shows all of the available ports.3Shows the port type, device connected to the port, and status.
6. TroubleshootingThis chapter gives helpful information for what to do if you encounter an error.• Paper feeding problems 298• Power and cable connecting problems 299• Printing problems 300• Printing quality problems 304• Copying problems 312• Scanning problems 313• Faxing problems 315• Operating system problems 317
2986. TroubleshootingPaper feeding problemsCondition Suggested solutionsPaper jams during printing. Clear the paper jam.Paper sticks together. • Check the maximum paper capacity of the tray.• Make sure that you are using the correct type of paper.• Remove paper from the tray and flex or fan the paper.• Humid conditions may cause some paper to stick together.Multiple sheets of paper do not feed. Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.Paper does not feed into the machine. • Remove any obstructions from inside the machine.• Paper has not been loaded correctly. Remove paper from the tray and reload it correctly.• There is too much paper in the tray. Remove excess paper from the tray.• The paper is too thick. Use only paper that meets the specifications required by the machine.The paper keeps jamming. • There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, use the manual feeding in tray.• An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine.• There may be debris inside the machine. Open the front cover and remove any debris.Transparencies stick together in the paper exit.Use only transparencies specifically designed for laser printers. Remove each transparency as it exits from the machine.Envelopes skew or fail to feed correctly. Ensure that the paper guides are against both sides of the envelopes.
2996. TroubleshootingPower and cable connecting problems Click this link to open an animation about solving power problems.Condition Suggested solutionsThe machine is not receiving power, or the connection cable between the computer and the machine is not connected properly.• Connect the machine to the electricity supply first. If the machine has a (Power/Wakeup) button on the control, press it. • Disconnect the machine’s cable and reconnect it.
3006. TroubleshootingPrinting problemsCondition Possible cause Suggested solutionsThe machine does not print.The machine is not receiving power. Connect the machine to the electricity supply first. If the machine has a (Power/Wakeup) button on the control, press it. The machine is not selected as the default machine.Select your machine as your default machine in Windows.Check the machine for the following:• The cover is not closed. Close the cover.• Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 105).• No paper is loaded. Load paper (see "Loading paper in the tray" on page 42).• The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 80).• Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 80).If a system error occurs, contact your service representative.The connection cable between the computer and the machine is not connected properly.Disconnect the machine cable and reconnect it (see "Rear view" on page 23).The connection cable between the computer and the machine is defective.If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different machine cable.The port setting is incorrect. Check the Windows printer settings to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one.
Printing problems3016. TroubleshootingThe machine does not print.The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct.The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver.The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative.The document size is so big that the hard disk space of the computer is insufficient to access the print job.Get more hard disk space and print the document again.The output tray is full. Once the paper is removed from the output tray, the machine resumes printing.The machine selects print materials from the wrong paper source.The paper option that was selected in the Printing Preferences may be incorrect.For many software applications, the paper source selection is found under the Paper tab within the Printing Preferences (see "Opening printing preferences" on page 57). Select the correct paper source. See the printer driver help screen (see "Using help" on page 58).A print job is extremely slow.The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings.Half the page is blank. The page orientation setting may be incorrect. Change the page orientation in your application (see "Opening printing preferences" on page 57). See the printer driver help screen (see "Using help" on page 58).The paper size and the paper size settings do not match.Ensure that the paper size in the printer driver settings matches the paper in the tray.Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use (see "Opening printing preferences" on page 57).The machine prints, but the text is wrong, garbled, or incomplete.The machine cable is loose or defective. Disconnect the machine cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer that you know works and try a print job. Finally, try a new machine cable.Condition Possible cause Suggested solutions
Printing problems3026. TroubleshootingThe wrong printer driver was selected. Check the application’s printer selection menu to ensure that your machine is selected.The software application is malfunctioning. Try printing a job from another application.The operating system is malfunctioning. Exit Windows and reboot the computer. Turn the machine off and back on again.Pages print, but they are blank.The toner cartridge is defective or out of toner. Redistribute the toner, if necessary. If necessary, replace the toner cartridge.• See "Redistributing toner" on page 77.• See "Replacing the toner cartridge" on page 80.The file may have blank pages. Check the file to ensure that it does not contain blank pages.Some parts, such as the controller or the board, may be defective.Contact a service representative.The machine does not print PDF files correctly. Some parts of graphics, text, or illustrations are missing.Incompatibility between the PDF file and the Acrobat products.Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options. It will take longer to print when you print a PDF file as an image. The print quality of photos is not good. Images are not clear.The resolution of the photo is very low. Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced. Before printing, the machine emits vapor near the output tray.Using damp paper can cause vapor during printing.This is not a problem. Just keep printing.Condition Possible cause Suggested solutions
Printing problems3036. TroubleshootingThe machine does not print special-sized paper, such as billing paper.Paper size and paper size setting do not match. Set the correct paper size in the Custom in Paper tab in Printing Preferences (see "Opening printing preferences" on page 57).The printed billing paper is curled.The paper type setting does not match. Change the printer option and try again. Go to Printing Preferences, click Paper tab, and set type to Thick (see "Opening printing preferences" on page 57).Samsung Printer Experience is not shown when you click more settings.Samsung Printer Experience is not installed. Download the app. from theGWindows Store and install it.Samsung Printer Experience is not shown when you click more settings.Machine information is not displayed when you click the device in the Devices and Printers.Check the Printer properties. Click the Ports tab.(Control Panel > Devices and Printers > Right-click on your printer icon and select Printer properties)If the port is set to File or LPT, uncheck them and select TCP/IP, USB, or WSD.Machine information is not displayed when you click the device in the Devices and Printers.The error related toast message pops up. The error related toast message pops up. Condition Possible cause Suggested solutions
3046. TroubleshootingPrinting quality problemsIf the inside of the machine is dirty or paper has been loaded improperly, there might be a reduction in print quality. See the table below to clear the problem. Condition Suggested solutionsLight or faded print • If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge (see "Replacing the toner cartridge" on page 80).• The paper may not meet paper specifications; for example, the paper may be too moist or rough.• If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and turn the toner save mode off. See the help screen of the printer driver.• A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. Clean the inside of your machine (see "Cleaning the machine" on page 89).• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89). If these steps do not correct the problem, contact a service representative.The top half of the paper is printed lighter than the rest of the paperThe toner might not adhere properly to this type of paper.• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see "Opening printing preferences" on page 57).
Printing quality problems3056. TroubleshootingToner specks • The paper may not meet specifications; for example, the paper may be too moist or rough.• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89).• The paper path may need cleaning. Contact a service representative (see "Cleaning the machine" on page 89).Dropouts If faded areas, generally rounded, occur randomly on the page:• A single sheet of paper may be defective. Try reprinting the job.• The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper.• The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thick (see "Opening printing preferences" on page 57).If these steps do not correct the problem, contact a service representative.White Spots If white spots appear on the page:• The paper is too rough and a lot of dirt from paper falls to the inner components within the machine, so the transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89).• The paper path may need cleaning. Clean the inside of your machine (see "Cleaning the machine" on page 89).If these steps do not correct the problem, contact a service representative.Condition Suggested solutionsAaBbCcAaBbCcAaBbCcAaBbCcAaBbCcAaBbCAaBbCAaBbCAaBbCAaBbC
Printing quality problems3066. TroubleshootingVertical lines If black vertical streaks appear on the page:• The surface (drum part) of the toner cartridge inside the machine has probably been scratched. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 80).If white vertical streaks appear on the page:• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89). If these steps do not correct the problem, contact a service representative.Black or color background If the amount of background shading becomes unacceptable:• Change to a lighter weight paper.• Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount of background shading.• Remove the old toner cartridge and install a new one (see "Replacing the toner cartridge" on page 80).• Thoroughly redistribute the toner (see "Redistributing toner" on page 77).Toner smear • Clean the inside of the machine (see "Cleaning the machine" on page 89).• Check the paper type and quality.• Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 80).Condition Suggested solutions
Printing quality problems3076. TroubleshootingVertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals:• The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one (see "Replacing the toner cartridge" on page 80).• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.• The fusing assembly may be damaged. Contact a service representative.Background scatter Background scatter results from bits of toner randomly distributed on the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture.• If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems.Or select Thick from the Printing Preferences window (see "Opening printing preferences" on page 57).• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or in Printing Preferences (see "Opening printing preferences" on page 57). Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.• If you are using a new toner cartridge, redistribute the toner first (see "Redistributing toner" on page 77).Toner particles are around bold characters or picturesThe toner might not adhere properly to this type of paper.• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see "Opening printing preferences" on page 57).• Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.Condition Suggested solutionsA
Printing quality problems3086. TroubleshootingMisformed characters • If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try different paper.Page skew • Ensure that the paper is loaded properly.• Check the paper type and quality.• Ensure that the guides are not too tight or too loose against the paper stack.Curl or wave • Ensure that the paper is loaded properly.• Check the paper type and quality. Both high temperature and humidity can cause paper curl.• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.Condition Suggested solutionsAaBbCAaBbCAaBbCAaBbCAaBbCc
Printing quality problems3096. TroubleshootingWrinkles or creases • Ensure that the paper is loaded properly.• Check the paper type and quality.• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.Back of printouts are dirty • Check for leaking toner. Clean the inside of the machine (see "Cleaning the machine" on page 89).Solid color or black pages • The toner cartridge may not be installed properly. Remove the cartridge and reinsert it.• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 80).• The machine may require repairing. Contact a service representative.Condition Suggested solutionsA
Printing quality problems3106. TroubleshootingLoose toner • Clean the inside of the machine (see "Cleaning the machine" on page 89).• Check the paper type and quality.• Remove the toner cartridge and then, install a new one (see "Replacing the toner cartridge" on page 80).If the problem persists, the machine may require repair. Contact a service representative.Character voids Character voids are white areas within parts of characters that should be solid black:• If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. • You may be printing on the wrong surface of the paper. Remove the paper and turn it around. • The paper may not meet paper specifications.Horizontal stripes If horizontally aligned black streaks or smears appear:• The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 80).If the problem persists, the machine may require repairing. Contact a service representative.Condition Suggested solutionsA
Printing quality problems3116. Troubleshooting Curl If the printed paper is curled or paper does not feed into the machine:• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. • Change the printer’s paper option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thin (see "Opening printing preferences" on page 57).• An unknown image repetitively appears on a few sheets• Loose toner• Light printGor contamination occursYour machine is probably being used at an altitude of 1,000 m (3,281 ft) or above.The high altitude may affect the print quality, such as loose toner or light imaging. Change the altitude setting for your machine (see "Altitude adjustment" on page 229).Condition Suggested solutions
3126. TroubleshootingCopying problemsCondition Suggested solutionsCopies are too light or too dark. Adjust the darkness in copy feature to lighten or darken the backgrounds of copies (see "Changing the settings for each copy" on page 62).If the defect still appears after cleaning the machine.set the Copy Feature > Adjust Bkgd. > Auto. (see "Menu overview" on page 33).Smears, lines, marks, or spots appear on copies.• If the defects are on the original, adjust darkness in copy feature to lighten the background of your copies.• If there are no defects on the original, clean the scan unit (see "Cleaning the scan unit" on page 95).Copy image is skewed. • Ensure that the original is aligned with the registration guide.• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89).Blank copies print out. Ensure that the original is face down on the scanner glass or face up in the document feeder.If these steps do not correct the problem, contact a service representative.Image rubs off the copy easily. • Replace the paper in the tray with paper from a new package.• In high humidity areas, do not leave paper in the machine for extended periods of time.Frequent copy paper jams occur.• Fan the paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary.• Ensure that the paper is the proper type and weight (see "Print media specifications" on page 125).• Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.Toner cartridge produces fewer copies than expected before running out of toner.• Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other documents that use more toner.• The scanner lid may be left open while copies are being made.• Turn the machine off and back on.
3136. TroubleshootingScanning problemsCondition Suggested solutionsThe scanner does not work. • Make sure that you place the original to be scanned face down on the scanner glass, or face up in the document feeder (see "Loading originals" on page 51).• There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate.• Check that the machine printer cable is connected properly.• Make sure that the machine printer cable is not defective. Switch the printer cable with a known good cable. If necessary, replace the printer cable.• Check that the scanner is configured correctly. Check scan setting in the application you want to use to make certain that the scanner job is being sent to the correct port (for example, USB001).The unit scans very slowly. • Check if the machine is printing received data. If so, scan the document after the received data has been printed.• Graphics are scanned more slowly than text.• Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how to set BIOS, refer to your computer user’s guide.
Scanning problems3146. TroubleshootingMessage appears on your computer screen:• Device can’t be set to the H/W mode you want.• Port is being used by another program.•Port is disabled.• Scanner is busy receiving or printing data. When the current job is completed, try again.• Invalid handle.• Scanning has failed.• There may be a copying or printing job in progress. Try your job again when that job is finished.• The selected port is currently being used. Restart your computer and try again.• The machine printer cable may be improperly connected or the power may be off.• The scanner driver is not installed or the operating environment is not set up properly.• Ensure that the machine is properly connected and the power is on, then restart your computer.• The USB cable may be improperly connected or the power may be off.Condition Suggested solutions
3156. TroubleshootingFaxing problemsCondition Suggested solutionsThe machine is not working, there is no display, or the buttons are not working.• Unplug the power cord and plug it in again.• Ensure that there is power being supplied to the electrical outlet.• Ensure that the power is turned on.No dial tone. • Check that the phone line is properly connected (see "Rear view" on page 23).• Check that the phone socket on the wall is working by plugging in another phone.The numbers stored in memory do not dial correctly.Make sure that the numbers are stored in memory correctly. To check that, print an address book list.The original does not feed into the machine.• Make sure that the paper is not wrinkled and you are inserting it in correctly. Check that the original is the right size, not too thick or thin.• Make sure that the document feeder is firmly closed.• The document feeder rubber pad may need to be replaced. Contact a service representative (see "Available maintenance parts" on page 74).Faxes are not received automatically.• The receiving mode should be set to fax (see "Changing the receive modes" on page 264).• Make sure that there is paper in the tray (see "Print media specifications" on page 125).• Check to see if the display shows any error message. If it does, clear the problem.The machine does not send. • Make sure that the original is loaded in the document feeder or on the scanner glass.• Check the fax machine you are sending to, to see if it can receive your fax.The incoming fax has blank spaces or is of poor-quality.• The fax machine sending you the fax may be faulty.• A noisy phone line can cause line errors.• Check your machine by making a copy.• A toner cartridge has almost reached its estimated cartridge life. Replace the toner cartridge (see "Replacing the toner cartridge" on page 80).
Faxing problems3166. TroubleshootingSome of the words on an incoming fax are stretched.The fax machine sending the fax had a temporary document jam. There are lines on the originals you sent.Check your scan unit for marks and clean it (see "Cleaning the scan unit" on page 95).The machine dials a number, but the connection with the other fax machine fails.The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and ask them to solve the problem on their side.Faxes do not store in memory. There may not be enough memory space to store the fax. If the display indicating the memory status shows, delete any faxes you no longer need from the memory, and then try to store the fax again. Call for service.Blank areas appear at the bottom of each page or on other pages, with a small strip of text at the top.You may have chosen the wrong paper settings in the user option setting. Check the paper size and type again.Condition Suggested solutions
3176. TroubleshootingOperating system problems1 Common Windows problems Refer to the Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages. Condition Suggested solutions“File in Use” message appears during installation.Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall the printer driver.“General Protection Fault”, “Exception OE”, “Spool 32”, or “Illegal Operation” messages appear.Close all other applications, reboot Windows and try printing again.“Fail To Print”, “A printer timeout error occurred” message appear.These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in ready mode or after printing has completed, check the connection and/or whether an error has occurred.
Operating system problems3186. Troubleshooting2 Common Mac problems Refer to the Mac User’s Guide that came with your computer for further information on Mac error messages. Condition Suggested solutionsThe machine does not print PDF files correctly. Some parts of graphics, text, or illustrations are missing.Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options. It will take longer to print when you print a PDF file as an image. Some letters are not displayed normally during cover page printing.Mac OS cannot create the font while printing the cover page. The English alphabet and numbers are displayed normally on the cover page.When printing a document in Mac with Acrobat Reader 6.0 or higher, colors print incorrectly.Make sure that the resolution setting in your machine driver matches the one in Acrobat Reader.
Operating system problems3196. Troubleshooting3 Common Linux problems Condition Suggested solutionsThe machine does not print. • Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in the Printers configuration window to look at the list of available machines. Make sure that your machine is displayed on the list. If not, open Add new printer wizard to set up your device.• Check if the machine is started. Open Printers configuration and select your machine from the printers list. Look at the description in the Selected printer pane. If its status contains Stopped, press the Start button. Normal operation of the machine should be restored. The “stopped” status might be activated when some problems in printing occur. • Check if your application has special print options such as “-oraw”. If “-oraw” is specified in the command line parameter, then remove it to print properly. For Gimp front-end, select “print” -> “Setup printer” and edit the command line parameter in the command item.The machine does not print whole pages, and output is printed on half the page.It is a known problem that occurs when a color machine is used on version 8.51 or earlier of Ghostscript, 64-bit Linux OS, and has been reported to bugs.ghostscript.com as Ghostscript Bug 688252.The problem is solved in AFPL Ghostscript v. 8.52 or above. Download the latest version of AFPL Ghostscript from http://sourceforge.net/projects/ghostscript/ and install it to solve this problem.I cannot scan via Gimp Front-end.Check if Gimp Front-end has Xsane:Device dialog. on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detailed information, refer to the Help for Linux distribution CD or Gimp Front-end application. If you wish to use another kind of scan application, refer to application’s Help.“Cannot open port device file” error message appears when printing a document.Avoid changing print job parameters (e.q., via LPR GUI) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks the port while printing, the abrupt termination of the driver keeps the port locked and unavailable for subsequent print jobs. If this situation occurs, try to release the port by selecting Release port in the Port configuration window.
Operating system problems3206. Troubleshooting Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages. The machine does not appear on the scanners list.• Ensure your machine is attached to your computer, connected properly via the USB port, and is turned on.• Ensure the scanner driver for your machine is installed in your system. Open Unified Linux Driver configurator, switch to Scanners configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the window. • Ensure the port is not busy. Since functional components of machine (printer and scanner) share the same I/O interface (port), the situation of simultaneous access of different user applications to the same port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other user will encounter “device busy” response. This usually happens when starting a scan procedure. An appropriate message box appears.To identify the source of the problem, open the Ports configuration and select the port assigned to your scanner, port's symbol /dev/mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1, and so on. USB ports start at /dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane, you can see if the port is occupied by another application. If this is the case, you should either wait for completion of the current job or press the Release port button, if you are sure that the present port application is not functioning properly.The machine does not scan. • Ensure a document is loaded into the machine, ensure your machine is connected to the computer.• If there is an I/O error while scanning.Condition Suggested solutions
321 Contact SAMSUNG worldwideContact SAMSUNG worldwideIf you have any comments or questions regarding Samsung products, contact the Samsung customer care center.Country/Region Customer Care Center Web SiteALBANIA 42 27 5755 www.samsung.comANGOLA 91-726-7864 www.samsung.comARGENTINE 0800-333-3733 www.samsung.comARMENIA 0-800-05-555 www.samsung.comAUSTRALIA 1300 362 603 www.samsung.comAUSTRIA 0810-SAMSUNG (7267864, € 0.07/min)www.samsung.comAZERBAIJAN 088-55-55-555 www.samsung.comBAHRAIN8000-4726 www.samsung.com/ae (English)www.samsung.com/ae_ar (Arabic)BELARUS 810-800-500-55-500 www.samsung.comBELGIUM02-201-24-18 www.samsung.com/be (Dutch)www.samsung.com/be_fr (French)BOLIVIA 800-10-7260 www.samsung.comBOSNIA 05 133 1999 www.samsung.comBOTSWANA 0800-726-000 www.samsung.comBRAZIL 0800-124-4214004-0000www.samsung.comBULGARIA 07001 33 11 , normal tariff www.samsung.comCAMEROON 7095-0077 www.samsung.comCANADA1-800-SAMSUNG (726-7864) www.samsung.com/ca (English)www.samsung.com/ca_fr (French)CHILE 800-SAMSUNG (726-7864)From mobile 02-482 82 00www.samsung.comCHINA 400-810-5858 www.samsung.comCOLOMBIA 01-8000112112 www.samsung.comCOSTA RICA0-800-507-7267 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)COTE D’LVOIRE 8000 0077 www.samsung.comCROATIA 062 SAMSUNG (062 726 7864) www.samsung.comCountry/Region Customer Care Center Web Site
Contact SAMSUNG worldwide322 Contact SAMSUNG worldwideCYPRUS 8009 4000 only from landline www.samsung.comCZECH REPUBLIC800-SAMSUNG (800-726786) www.samsung.comSamsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8DENMARK 70 70 19 70 www.samsung.comDOMINICA1-800-751-2676 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)ECUADOR1-800-10-7267 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)EGYPT 08000-726786 www.samsung.comEIRE 0818 717100 www.samsung.comEL SALVADOR800-6225 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)ESTONIA 800-7267 www.samsung.comFINLAND 09 85635050 www.samsung.comCountry/Region Customer Care Center Web SiteFRANCE 01 48 63 00 00 www.samsung.comGERMANY0180 5 SAMSUNG bzw.0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.)www.samsung.comGEORGIA 0-800-555-555 www.samsung.comGHANA 0800-100770302-200077www.samsung.comGREECE80111-SAMSUNG (80111 726 7864) only from land line(+30) 210 6897691 from mobile and land linewww.samsung.comGUATEMALA1-800-299-0013 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)HONDURAS800-27919267 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)Country/Region Customer Care Center Web Site
Contact SAMSUNG worldwide323 Contact SAMSUNG worldwideHONG KONG(852) 3698-4698 www.samsung.com/hk (Chinese)www.samsung.com/hk_en/ (English)HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.comINDIA1800 1100 113030 82821800 3000 82821800 266 8282www.samsung.comINDONESIA 0800-112-8888021-5699-7777www.samsung.comIRAN 021-8255 www.samsung.comITALY 800-SAMSUNG (726-7864) www.samsung.comJAMAICA 1-800-234-7267 www.samsung.comJAPAN 0120-327-527 www.samsung.comJORDAN 800-22273065777444www.samsung.comKAZAKHSTAN 8-10-800-500-55-500 (GSM:7799) www.samsung.comKENYA 0800 724 000 www.samsung.comKOSOVO +381 0113216899 www.samsung.comCountry/Region Customer Care Center Web SiteKUWAIT183-2255 www.samsung.com/ae (English)www.samsung.com/ae_ar (Arabic)KYRGYZSTAN 00-800-500-55-500 www.samsung.comLATVIA 8000-7267 www.samsung.comLITHUANIA 8-800-77777 www.samsung.comLUXEMBURG 261 03 710 www.samsung.comMALAYSIA 1800-88-9999 www.samsung.comMACEDONIA 023 207 777 www.samsung.comMEXICO 01-800-SAMSUNG (726-7864) www.samsung.comMOLDOVA 0-800-614-40 www.samsung.comMONGOLIA +7-800-555-55-55 www.samsung.comMONTENEGRO 020 405 888 www.samsung.comMOROCCO 080 100 2255 www.samsung.comNAMIBIA 8197267864 www.samsung.comNETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/min)www.samsung.comNEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.comCountry/Region Customer Care Center Web Site
Contact SAMSUNG worldwide324 Contact SAMSUNG worldwideNICARAGUA00-1800-5077267 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)NIGERIA 0800-726-7864 www.samsung.comNORWAY 815 56480 www.samsung.comOMAN800-SAMSUNG (726-7864) www.samsung.com/ae (English)www.samsung.com/ae_ar (Arabic)PANAMA800-7267 www.samsung.com/latin_en (English)www.samsung.com/latin (Spanish)PERU 0-800-777-08 www.samsung.comPHILIPPINES1-800-10-SAMSUNG(726-7864) for PLDT1-800-3-SAMSUNG(726-7864) for Digitel1-800-8-SAMSUNG(726-7864) for Globe02-5805777www.samsung.comCountry/Region Customer Care Center Web SitePOLAND 0 801-1 SAMSUNG (172-678)+48 22 607-93-33www.samsung.comPORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.comPUERTO RICO 1-800-682-3180 www.samsung.comROMANIA08008 SAMSUNG (08008 726 7864)TOLL FREE No.www.samsung.comRUSSIA 8-800-555-55-55 www.samsung.comSAUDI ARABIA9200-21230 www.samsung.com/ae (English)www.samsung.com/ae_ar (Arabic)SENEGAL 800-00-0077 www.samsung.comSERBIA 0700 SAMSUNG (0700 726 7864) www.samsung.comSINGAPORE 1800-SAMSUNG (726-7864) www.samsung.comSLOVAKIA 0800-SAMSUNG (0800-726-7864) www.samsung.comSOUTH AFRICA 0860-SAMSUNG (726-7864) www.samsung.comSPAIN 902-1-SAMSUNG(902 172 678) www.samsung.comSWEDEN 0771 726 7864 (SAMSUNG) www.samsung.comCountry/Region Customer Care Center Web Site
Contact SAMSUNG worldwide325 Contact SAMSUNG worldwideSWITZERLAND0848-SAMSUNG (7267864, CHF 0.08/min)www.samsung.com/ch (German)www.samsung.com/ch_fr(French)TADJIKISTAN 8-10-800-500-55-500 www.samsung.comTAIWAN 0800-329-9990266-026-066www.samsung.comTANZANIA 0685 88 99 00 www.samsung.comTHAILAND 1800-29-323202-689-3232www.samsung.comTRINIDAD & TOBAGO1-800-SAMSUNG (726-7864) www.samsung.comTURKEY 444 77 11 www.samsung.comU.A.E 800-SAMSUNG (726-7864) www.samsung.comUGANDA 0800-300 300 www.samsung.comU.K 0330 SAMSUNG (7267864) www.samsung.comU.S.A 1-800-SAMSUNG (726-7864) www.samsung.comUKRAINE0-800-502-000 www.samsung.com/ua (Ukrainian)www.samsung.com/ua_ru (Russian)Country/Region Customer Care Center Web SiteUZBEKISTAN 8-10-800-500-55-500 www.samsung.comVENEZUELA 0-800-100-5303 www.samsung.comVIETNAM 1 800 588 889 www.samsung.comZAMBIA 211350370 www.samsung.comCountry/Region Customer Care Center Web Site
326 GlossaryGlossary The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. 802.11802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802). 802.11b/g/n802.11b/g/n can share same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150 Mbps. 802.11b/g/n devices may occasionally suffer interference from microwave ovens, cordless telephones, and Bluetooth devices.Access pointAccess Point or Wireless Access Point (AP or WAP) is a device that connects wireless communication devices together on wireless local area networks (WLAN), and acts as a central transmitter and receiver of WLAN radio signals. ADFAn Automatic Document Feeder (ADF) is a scanning unit that will automatically feed an original sheet of paper so that the machine can scan some amount of the paper at once. AppleTalkAppleTalk is a proprietary suite of protocols developed by Apple, Inc for computer networking. It was included in the original Mac (1984) and is now deprecated by Apple in favor of TCP/IP networking.BIT DepthA computer graphics term describing the number of bits used to represent the color of a single pixel in a bitmapped image. Higher color depth gives a broader range of distinct colors. As the number of bits increases, the number of possible colors becomes impractically large for a color map. 1-bit color is commonly called as monochrome or black and white.BMPA bitmapped graphics format used internally by the Microsoft Windows graphics subsystem (GDI), and used commonly as a simple graphics file format on that platform.
Glossary327 GlossaryBOOTPBootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assign the IP address from a pool of addresses to each client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system.CCDCharge Coupled Device (CCD) is a hardware which enables the scan job. CCD Locking mechanism is also used to hold the CCD module to prevent any damage when you move the machine.CollationCollation is a process of printing a multiple-copy job in sets. When collation is selected, the device prints an entire set before printing additional copies.Control PanelA control panel is a flat, typically vertical, area where control or monitoring instruments are displayed. They are typically found in front of the machine. CoverageIt is the printing term used for a toner usage measurement on printing. For example, 5% coverage means that an A4 sided paper has about 5% image or text on it. So, if the paper or original has complicated images or lots of text on it, the coverage will be higher and at the same time, a toner usage will be as much as the coverage.CSVComma Separated Values (CSV). A type of file format, CSV is used to exchange data between disparate applications. The file format, as it is used in Microsoft Excel, has become a de facto standard throughout the industry, even among non-Microsoft platforms.DADFA Duplex Automatic Document Feeder (DADF) is a scanning unit that will automatically feed and turn over an original sheet of paper so that the machine can scan on both sides of the paper.DefaultThe value or setting that is in effect when taking a printer out of its box state, reset, or initialized.
Glossary328 GlossaryDHCPA Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts.DIMMDual Inline Memory Module (DIMM), a small circuit board that holds memory. DIMM stores all the data within the machine like printing data, received fax data.DLNAThe Digital Living Network Alliance (DLNA) is a standard that allows devices on a home network to share information with each other across the network.DNSThe Domain Name Server (DNS) is a system that stores information associated with domain names in a distributed database on networks, such as the Internet.Dot Matrix PrinterA dot matrix printer refers to a type of computer printer with a print head that runs back and forth on the page and prints by impact, striking an ink-soaked cloth ribbon against the paper, much like a typewriter.DPIDots Per Inch (DPI) is a measurement of resolution that is used for scanning and printing. Generally, higher DPI results in a higher resolution, more visible detail in the image, and a larger file size.DRPD Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company service which enables a user to use a single telephone line to answer several different telephone numbers.DuplexA mechanism that will automatically turn over a sheet of paper so that the machine can print (or scan) on both sides of the paper. A printer equipped with a Duplex Unit can print on both sides of paper during one print cycle.Duty CycleDuty cycle is the page quantity which does not affect printer performance for a month. Generally the printer has the lifespan limitation such as pages per year. The lifespan means the average capacity of print-outs, usually within the warranty period. For example, if the duty cycle is 48,000 pages per month assuming 20 working days, a printer limits 2,400 pages a day.
Glossary329 GlossaryECMError Correction Mode (ECM) is an optional transmission mode built into Class 1 fax machines or fax modems. It automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise.EmulationEmulation is a technique of one machine obtaining the same results as another.An emulator duplicates the functions of one system with a different system, so that the second system behaves like the first system. Emulation focuses on exact reproduction of external behavior, which is in contrast to simulation, which concerns an abstract model of the system being simulated, often considering its internal state.EthernetEthernet is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, and frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most widespread LAN technology in use during the 1990s to the present.EtherTalkA suite of protocols developed by Apple Computer for computer networking. It was included in the original Mac (1984) and is now deprecated by Apple in favor of TCP/IP networking. FDIForeign Device Interface (FDI) is a card installed inside the machine to allow a third party device such as a coin operated device or a card reader. Those devices allow the pay-for-print service on your machine.FTPA File Transfer Protocol (FTP) is a commonly used protocol for exchanging files over any network that supports the TCP/IP protocol (such as the Internet or an intranet).Fuser Unit The part of a laser printer that fuses the toner onto the print media. It consists of a heat roller and a pressure roller. After toner is transferred onto the paper, the fuser unit applies heat and pressure to ensure that the toner stays on the paper permanently, which is why paper is warm when it comes out of a laser printer.
Glossary330 GlossaryGatewayA connection between computer networks, or between a computer network and a telephone line. It is very popular, as it is a computer or a network that allows access to another computer or network.GrayscaleA shades of gray that represent light and dark portions of an image when color images are converted to grayscale; colors are represented by various shades of gray.HalftoneAn image type that simulates grayscale by varying the number of dots. Highly colored areas consist of a large number of dots, while lighter areas consist of a smaller number of dots.Mass storage device (HDD)Mass storage device (HDD), commonly referred to as a hard drive or hard disk, is a non-volatile storage device which stores digitally-encoded data on rapidly rotating platters with magnetic surfaces.IEEEThe Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity.IEEE 1284The 1284 parallel port standard was developed by the Institute of Electrical and Electronics Engineers (IEEE). The term "1284-B" refers to a specific connector type on the end of the parallel cable that attaches to the peripheral (for example, a printer). IntranetA private network that uses Internet Protocols, network connectivity, and possibly the public telecommunication system to securely share part of an organization's information or operations with its employees. Sometimes the term refers only to the most visible service, the internal website.IP addressAn Internet Protocol (IP) address is a unique number that devices use in order to identify and communicate with each other on a network utilizing the Internet Protocol standard.
Glossary331 GlossaryIPMThe Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute.IPPThe Internet Printing Protocol (IPP) defines a standard protocol for printing as well as managing print jobs, media size, resolution, and so forth. IPP can be used locally or over the Internet to hundreds of printers, and also supports access control, authentication, and encryption, making it a much more capable and secure printing solution than older ones.IPX/SPXIPX/SPX stands for Internet Packet Exchange/Sequenced Packet Exchange. It is a networking protocol used by the Novell NetWare operating systems. IPX and SPX both provide connection services similar to TCP/IP, with the IPX protocol having similarities to IP, and SPX having similarities to TCP. IPX/SPX was primarily designed for local area networks (LANs), and is a very efficient protocol for this purpose (typically its performance exceeds that of TCP/IP on a LAN).ISOThe International Organization for Standardization (ISO) is an international standard-setting body composed of representatives from national standards bodies. It produces world-wide industrial and commercial standards.ITU-TThe International Telecommunication Union is an international organization established to standardize and regulate international radio and telecommunications. Its main tasks include standardization, allocation of the radio spectrum, and organizing interconnection arrangements between different countries to allow international phone calls. A -T out of ITU-T indicates telecommunication.ITU-T No. 1 chartStandardized test chart published by ITU-T for document facsimile transmissions.JBIGJoint Bi-level Image Experts Group (JBIG) is an image compression standard with no loss of accuracy or quality, which was designed for compression of binary images, particularly for faxes, but can also be used on other images.JPEGJoint Photographic Experts Group (JPEG) is a most commonly used standard method of lossy compression for photographic images. It is the format used for storing and transmitting photographs on the World Wide Web.
Glossary332 GlossaryLDAPThe Lightweight Directory Access Protocol (LDAP) is a networking protocol for querying and modifying directory services running over TCP/IP.LEDA Light-Emitting Diode (LED) is a semiconductor device that indicates the status of a machine.MAC addressMedia Access Control (MAC) address is a unique identifier associated with a network adapter. MAC address is a unique 48-bit identifier usually written as 12 hexadecimal characters grouped in pairs (e. g., 00-00-0c-34-11-4e). This address is usually hard-coded into a Network Interface Card (NIC) by its manufacturer, and used as an aid for routers trying to locate machines on large networks.MFPMulti Function Peripheral (MFP) is an office machine that includes the following functionality in one physical body, so as to have a printer, a copier, a fax, a scanner and etc.MHModified Huffman (MH) is a compression method for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image recommended by ITU-T T.4. MH is a codebook-based run-length encoding scheme optimized to efficiently compress white space. As most faxes consist mostly of white space, this minimizes the transmission time of most faxes. MMRModified Modified READ (MMR) is a compression method recommended by ITU-T T.6.ModemA device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information.MRModified Read (MR) is a compression method recommended by ITU-T T.4. MR encodes the first scanned line using MH. The next line is compared to the first, the differences determined, and then the differences are encoded and transmitted.
Glossary333 GlossaryNetWareA network operating system developed by Novell, Inc. It initially used cooperative multitasking to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack. Today NetWare supports TCP/IP as well as IPX/SPX.OPCOrganic Photo Conductor (OPC) is a mechanism that makes a virtual image for print using a laser beam emitted from a laser printer, and it is usually green or rust colored and has a cylinder shape. An imaging unit containing a drum slowly wears the drum surface by its usage in the printer, and it should be replaced appropriately since it gets worn from contact with the cartridge development brush, cleaning mechanism, and paper.OriginalsThe first example of something, such as a document, photograph or text, etc, which is copied, reproduced or translated to produce others, but which is not itself copied or derived from something else.OSIOpen Systems Interconnection (OSI) is a model developed by the International Organization for Standardization (ISO) for communications. OSI offers a standard, modular approach to network design that divides the required set of complex functions into manageable, self-contained, functional layers. The layers are, from top to bottom, Application, Presentation, Session, Transport, Network, Data Link and Physical.PABX A private automatic branch exchange (PABX) is an automatic telephone switching system within a private enterprise.PCLPrinter Command Language (PCL) is a Page Description Language (PDL) developed by HP as a printer protocol and has become an industry standard. Originally developed for early inkjet printers, PCL has been released in varying levels for thermal, dot matrix printer, and laser printers.PDFPortable Document Format (PDF) is a proprietary file format developed by Adobe Systems for representing two dimensional documents in a device independent and resolution independent format.
Glossary334 GlossaryPostScriptPostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. - that is run in an interpreter to generate an image.Printer DriverA program used to send commands and transfer data from the computer to the printer.Print MediaThe media like paper, envelopes, labels, and transparencies which can be used in a printer, a scanner, a fax or, a copier.PPMPages Per Minute (PPM) is a method of measurement for determining how fast a printer works, meaning the number of pages a printer can produce in one minute.PRN fileAn interface for a device driver, this allows software to interact with the device driver using standard input/output system calls, which simplifies many tasks. ProtocolA convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints.PSSee PostScript.PSTNThe Public-Switched Telephone Network (PSTN) is the network of the world's public circuit-switched telephone networks which, on industrial premises, is usually routed through the switchboard.RADIUSRemote Authentication Dial In User Service (RADIUS) is a protocol for remote user authentication and accounting. RADIUS enables centralized management of authentication data such as usernames and passwords using an AAA (authentication, authorization, and accounting) concept to manage network access.ResolutionThe sharpness of an image, measured in Dots Per Inch (DPI). The higher the dpi, the greater the resolution.
Glossary335 GlossarySMBServer Message Block (SMB) is a network protocol mainly applied to share files, printers, serial ports, and miscellaneous communications between nodes on a network. It also provides an authenticated Inter-process communication mechanism.SMTPSimple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions across the Internet. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified, and then the message text is transferred. It is a client-server protocol, where the client transmits an email message to the server.SSIDService Set Identifier (SSID) is a name of a wireless local area network (WLAN). All wireless devices in a WLAN use the same SSID in order to communicate with each other. The SSIDs are case-sensitive and have a maximum length of 32 characters.Subnet Mask The subnet mask is used in conjunction with the network address to determine which part of the address is the network address and which part is the host address.TCP/IPThe Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of communications protocols that implement the protocol stack on which the Internet and most commercial networks run.TCRTransmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions.TIFFTagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. TIFF images make use of tags, keywords defining the characteristics of the image that is included in the file. This flexible and platform-independent format can be used for pictures that have been made by various image processing applications.Toner CartridgeA kind of bottle or container used in a machine like a printer which contains toner. Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be fused by by a combination of heat/pressure from the fuser, causing it to bind to the fibers in the paper.
Glossary336 GlossaryTWAINAn industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. It is an image capture API for Microsoft Windows and Apple Mac operating systems.UNC PathUniform Naming Convention (UNC) is a standard way to access network shares in Window NT and other Microsoft products. The format of a UNC path is: \\<servername>\<sharename>\<Additional directory>URLUniform Resource Locator (URL) is the global address of documents and resources on the Internet. The first part of the address indicates what protocol to use, the second part specifies the IP address or the domain name where the resource is located.USBUniversal Serial Bus (USB) is a standard that was developed by the USB Implementers Forum, Inc., to connect computers and peripherals. Unlike the parallel port, USB is designed to concurrently connect a single computer USB port to multiple peripherals.WatermarkA watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light. Watermarks were first introduced in Bologna, Italy in 1282; they have been used by papermakers to identify their product, and also on postage stamps, currency, and other government documents to discourage counterfeiting.WEPWired Equivalent Privacy (WEP) is a security protocol specified in IEEE 802.11 to provide the same level of security as that of a wired LAN. WEP provides security by encrypting data over radio so that it is protected as it is transmitted from one end point to another.WIAWindows Imaging Architecture (WIA) is an imaging architecture that is originally introduced in Windows Me and Windows XP. A scan can be initiated from within these operating systems by using a WIA-compliant scanner.WPAWi-Fi Protected Access (WPA) is a class of systems to secure wireless (Wi-Fi) computer networks, which was created to improve upon the security features of WEP.
Glossary337 GlossaryWPA-PSKWPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or home users. A shared key, or password, is configured in the wireless access point (WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique key for each session between a wireless client and the associated WAP for more advanced security.WPSThe Wi-Fi Protected Setup (WPS) is a standard for establishing a wireless home network. If your wireless access point supports WPS, you can configure the wireless network connection easily without a computer.XPSXML Paper Specification (XPS) is a specification for a Page Description Language (PDL) and a new document format, which has benefits for portable document and electronic document, developed by Microsoft. It is an XML-based specification, based on a new print path and a vector-based device-independent document format.
338IndexIndexAaddress bookeditingG232group editingG233group registeringG233registeringG232usingG232address book setupG232AirPrintG223AnyWeb PrintG271Bbuttonsprint screenG26CcleaninginsideG89outsideG89pickup rollerG93scan unitG95cleaning a machineG89control panelG24conventionG14copygeneral setupG160copy buttonG24SG25copyingbasic copyingG61reducing or enlarging copiesG63Ddefault settingstray settingG50direct printing utilityG243driver installationUnixG185Eeasy document creatorG276configurationG277convert e-bookG280device nameG277e-book conversionG277plug-inG281quick scanG277quick scanningG278scanG277scanningG278searchG278send faxG277SG280SNS scanningG279SNS uploadG277eco printingG58entering characterG230error messageG117Ffavorites settings, for printingG57faxadding documents to a reserved faxG261automatic redialingG259canceling a reserved fax jobG262changing the receive modesG264delaying a fax transmissionG261forwarding a received fax to another destinationG263forwarding a sent fax to another destinationG262general setupG163printing faxes on both sides of the paperG266Printing sent fax report automaticallyG267
Index339Indexreceiving faxes in memoryG267receiving in Answering Machine modeG264receiving in DRPD modeG265receiving in Fax modeG264receiving in secure modeG266receiving in Tel modeG264receiving with ext. telephoneG265redialing the last numberG259sending a fax in the computerG260sending a priority faxG262fax featureG259fax sendingmulti sendingG68faxingadjusting darknessG70adjusting resolutionG69preparing to faxG67receiving in Fax modeG69featuresG5machine featuresG156print media featureG125front viewG21Ggeneral iconsG14general settingsG166glossaryG326google cloud printingG225Iid copyG63ID copy buttonG24SG26Jjamclearing original documentG100clearing paperG105tips for avoiding paper jamsG99LLCD displaybrowsing the machine statusG160SG162SG163SG169Linuxcommon Linux problemsG319driver installation for network connectedG184driver installation for USB cable connectedG154driver reinstallation for USB cable connectedG155printer propertiesG247printingG246scanningG257system requirementsG130unifled driver configuratorG293using SetIPG177linux scanningG257loadingpaper in manual feeder/multi-purpose trayG43paper in the tray1G42special mediaG45loading originalsG51MMaccommon Mac problemsG318driver installation for network connectedG183driver installation for USB cable connectedG152
Index340Indexdriver reinstallation for USB cable connectedG153printingG244scanningG256system requirementsG129using SetIPG176macscanningG256machine informationG160SG162SG163SG169machine setupmachine statusG160SG162SG163SG169maintenance partsG74manual feeder/multi-purpose trayloadingG43menu overviewG33multi-purpose traytips on usingG43using special mediaG45Nnetworkdriver installationLinuxG184MacG183UNIXG185WindowsG180general setupG171installing environmentG131introducing network programsG174IPv6 configurationG188SetIP programG175SG176SG177SG213wired network setupG175wireless network setupG191n-up printingMacG244Oon hook dial buttonG25optional trayloading paperG42overlay printingcreateG241deleteG241printG241Pplacing a machineadjusting the altitudeG229preparing originals typeG51printgeneral setupG158mobile OSG222mobileprintG222print mediacard stockG49envelopeG46labelsG48output supportG125preprinted paperG50setting the paper sizeG50setting the paper typeG50special mediaG45transparencyG47print menuG158printer preferencesLinuxG247printer statusgeneral informationG285PrintingG55printingchanging the default print settingsG235LinuxG246
Index341IndexMacG244multiple pages on one sheet of paperMacG244printing a documentWindowsG55printing on both sides of paperMacG245printing to a fileG236setting as a default machineG235special printer featuresG237UNIXG248using direct printing utilityG243printing a documentLinuxG246MacG244UNIXG248printing featureG235problemoperating system problemsG317problemscopying problemsG312faxing problemsG315paper feeding problemsG298power problemsG299printing problemsG300printing quality problemsG304scanning problemsG313Rrear viewG23redial/pause buttonG24SG25regulatiory informationG133reportsmachine informationG160SG163SG164SG165SG166SG 167SG169SG170resolutionfaxingG69SsafetyinformationG15symbolsG15Samsung Easy Document CreatorG254samsung printer experienceG287Samsung Printer StatusG285Scan AssitantG255scan featureG250ScanningScanning with Samsung Easy Document CreatorG254Scanning with Samsung Scan AssitantG255scanningbasic informationG250Linux scanningG257Mac scanningG256Scanning from image editing programG252Scanning from network connected machineG251Scanning using the WIA driverG253service contact numbersG321SetIP programG175SG213Special featuresG228specificationsG123print mediaG125statusG24SG26suppliesavailable suppliesG73estimated toner cartridge lifeG76monitoring the supplies lifeG87orderingG73replacing toner cartridgeG80SyncThru Web Service
Index342Indexgeneral informationG273SyncThru™ Web ServiceG273Ttoner cartridgeestimated lifeG76handling instructionsG75non-Samsung and refilledG75redistributing tonerG77replacing the cartridgeG80storingG75trayadjusting the width and lengthG40changing the tray sizeG40loading paper in manual feeder/multi-purpose trayG43setting the paper size and typeG50Uunderstanding the status LEDG114UNIXdriver installation for network connectedG185printingG248Unixsystem requirementsG130USB cabledriver installationG28SG31SG152SG154driver reinstallationG153SG155using helpG58SG246WwatermarkcreateG239deleteG240editG240Windowscommon Windows problemsG317driver installation for network connectedG180driver installation for USB cable connectedG28SG 31system requirementsG128using SetIPG175SG213wirelessad hoc modeG191Infrastructure modeG191USB cableG198SG201WPSdisconnectiongG196PBC modeG196wireless networknetwork cableG212

Navigation menu