Samsung Electronics Co SWDY3100 Cell/PCS GSM/EDGE/WCDMA Mini PCI Transmitter Card User Manual Springfield N130 XP eng indb

Samsung Electronics Co Ltd Cell/PCS GSM/EDGE/WCDMA Mini PCI Transmitter Card Springfield N130 XP eng indb

UserManual.wiki >

Samsung Electronics Co >

SWDY3100 User Manual >

User Manual 1 HTML Version

User Manual 1

User Guide

SAMSUNG

Chapter 1.

Getting Started

Product Features 2

Before You Start 3

Contents 8

Safety Precautions 9

Proper Posture During Computer Use 25

Important Safety Information 28

Replacement Parts and Accessories 31

Regulatory Compliance Statements 34

WEEE SYMBOL INFORMATION 49

Overview 51

Turning the Computer On and Off 57

PC in Hand

 Improved portability through its compact size and

lightweight design

 Slim, Polished Design

Small but Powerful PC

 An Intel “Atom” Processor with Low Power

Consumption and Low Heat

 Extended Use Time through the use of Power-

Efcient Parts

Versatile and Convenient Use

 A Camera Module for Video Chatting or

Conferencing (Optional)

 Wireless LAN and Bluetooth Function (Optional)

 Multi Card Slot Support (Optional)

 Easy-to-Use Keyboard

Optional items may be changed or may not be

provided depending on the computer model.

Product Features

Before You Start

Before reading the User Guide, rst check the following information.

User Guide Information

This product is supplied with an

Installation Guide, and a User Guide.

It is now even easier to use your

computer by using either of the guides

depending on your needs.

Installation Guide

This guide is provided so that you can

conveniently refer to this guide when

using the computer for the rst time after

purchasing it.

This document includes the computer

components and the connection

procedures.

User Guide

You are currently reading the User Guide.

To open the le at any time, double-click

the icon on the Desktop. Alternatively,

select Start > All Programs > Samsung

> User Guide > User Guide.

This document includes the computer

functions, how to use the functions, and

how to use the programs.

Utilizing the User Guide

z Be sure to read the Safety

Precautions before using the

computer.

x Refer to the separately supplied

Installation Guide when installing

your computer.

c Refer to the User Guide for the

procedures to use the computer.

v Using the Index of the User Guide,

you can easily nd any information

you are looking for.

b Using the Glossary of the User

Guide, you can easily nd meanings

for technical terms.

n If a problem occurs, refer to the Q & A

included in the User Guide.

 Optional items, some devices and

software referred to in the User

Guide may not be provided and/or

changed by upgrade.

Note that the computer

environment referred to in the

User Guide may not be the same

as your own environment.

 Images used in this User Guide may differ from the actual product.

 This guide describes procedures for using both the mouse and the touchpad.

 The illustrations provided in this guide assume that your operating system is

Windows XP. These illustrations are subject to change.

 The User guide supplied with this computer may vary depending on your model.

Safety Precaution Notations

Icon Notation Description

Warning Failing to follow instructions marked with this symbol, may

cause personal injury and or fatality.

Caution Failing to follow instructions marked with this symbol, may

cause slight injury to yourself or damage your property.

Text Notations

Icon Notation Description

Before You Start Content included in this section includes information required

before using a function.

Caution Content included in this section includes information required

about the function.

Note Content included in this section includes helpful information to

use the function.

XX This notation represents the page number you can refer to for

information about related functions or as a reference.

Start > All Programs

> Samsung > User

Guide > User Guide

This represents a menu path to run a program.

Click the Start button and then select All Programs > Samsung

> User Guide > User Guide in this order from the menu.

Samsung Electronics Co., Ltd. owns the copyright of this manual.

No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, without the consent of Samsung Electronics Co., Ltd.

The information in this document is subject to change without notice due to improving

the performance of the product.

Samsung Electronics shall not be liable for any data loss. Please take care to avoid

losing any important data and backup your data to prevent any such data loss.

Precautions for Operating System Support

If a problem occurs because of the reinstallation of other operating systems(OS) or a

previous version of a OS pre-installed on this computer, or a software that does not

support the OS, the company will not provide technical support, a replacement or

refund, and if our service engineer visits you due to this problem, a service charge will

be applied.

Performance Restrictions

z Online games and some games(3D,2D) may not be supported and Full HD video

and some high bit rate HD video playback may be slow and stutter on this computer.

x There is one memory slot provided on this computer. It supports 2GB memory

max. To upgrade to 2GB memory, replace the current memory with a 2GB memory

module.

About the Product Capacity Representation Standard

About HDD Capacity Representation

The capacity of the storage device (HDD, SSD) of the manufacturer is calculated

assuming that 1KB=1,000 Bytes.

However, the operating system (Windows) calculates the storage device capacity

assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the

HDD in Windows is smaller than the actual capacity due to the difference in capacity

calculation.

(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB,

80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB)

In addition, the capacity representation in Windows may be even smaller because some

programs such as Recovery Solution may reside in a hidden area of the HDD.

About Memory Capacity Representation

The memory capacity reported in Windows is less than the actual capacity of memory.

This is because BIOS or a video adapter uses a portion of memory or claims it for

further use.

(E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as

1,022MB or less)

Recovery Solution Representation (Optional)

Q. What is a Recovery Area?

A. - Samsung computers have an additional partition to recover computers or save

backup les. (Only for models with the Samsung Recovery Solution.)

This partition is called a Recovery Area and it includes a recovery image that

comprises of the OS and application programs.

- You can either double-click the Samsung Recovery Solution icon on the desktop

or press F4 while booting the computer to enter the Recovery Area. Then you

can back up the present computer state or recover the computer from backed up

images.

- For deleting the Recovery Area, you need to use an additional Recovery Area

Removal Tool. After deleting the recovery area, you can use the newly created

partition for other uses, such as for saving personal data. Be careful that once the

recovery area is deleted, the Samsung Recovery Solutions will not work anymore.

Q. The capacity representation of the hard disk drive(HDD) in Windows is

different from the product specications.

A. - The capacity of the storage device (HDD) of the manufacturer is calculated

assuming that 1KB=1,000 Bytes. However, the operating system (Windows)

calculates the storage device capacity assuming that 1KB=1,024 Bytes, and

therefore the capacity representation of the HDD in Windows is smaller than the

actual capacity. This is due to the difference in capacity calculation and does not

mean the installed HDD is different from the product specications.

- The capacity representation in Windows may be smaller than the actual capacity

because some programs occupy a certain area of the HDD outside of Windows.

- For models with Samsung Recovery Solution, the HDD capacity representation

in Windows may be smaller than the actual capacity because Samsung Recovery

Solution uses a hidden area of about 5~20GB of the HDD to save the recovery

image, and that hidden area is not counted towards the total size available to

Windows. The size of Samsung Recovery Solution varies by models because of the

different size of applied programs.

Contents

Chapter 1. Getting Started

Product Features 2

Before You Start 3

Contents 8

Safety Precautions 9

Proper Posture During Computer Use 25

Important Safety Information 28

Replacement Parts and Accessories 31

Regulatory Compliance Statements 34

WEEE SYMBOL INFORMATION 49

Overview 51

Turning the Computer On and Off 57

Chapter 2. Using the Computer

Keyboard 60

Touchpad 63

External-type CD drive (To be

purchased) 66

Multi Card Slot (Optional) 68

Connecting a monitor / TV 71

Adjusting the Volume 75

Chapter 3. Using the Network

Wired Network 79

Wireless Network 82

Chapter 4. Settings and Upgrade

LCD Brightness Control 89

BIOS Setup 90

Setting a Boot Password 94

Changing the Boot Priority 97

Upgrading Memory 98

Battery 100

Using the Security Lock Port 106

Chapter 5. Appendix

Reinstalling Windows XP (Optional) 108

Reinstalling Software (Optional) 113

Using Samsung Recovery Solution

(Optional) 115

Questions and Answers 124

Product Specications 145

Glossary 147

Index 151

Safety Precautions

For your security and to prevent damage, please read the following safety instructions

carefully. Since these are commonly applied to Samsung Computers, some gures may differ

from the actual product.

Installation Related

Do not install the product

in places exposed

to humidity such as

bathrooms.

There is a danger of

electric shock. Use the

product within the operating

conditions specied in the

Manufacturers User Guide.

Keep the plastic bags out

of the reach of children.

There is a danger of

suffocation.

Keep a distance of 15cm

or more between the

computer and the wall

and do not place any

objects between them.

Failing to do so may

cause an increase in the

internal temperature of

the computer and result in

injury.

Do not install the

computer on a slant or a

place prone to vibrations,

or avoid using the

computer in that location

for a long time.

Failing to do so may result

in an increased risk of

malfunctions or damage to

the product.

NB Ver 2.0

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Avoid exposing any part

of your body to the heat

from the computer vent

or AC adapter for a long

time when the computer

is on.

Exposing a part of your

body close to the heat from

the vent or AC adapter for

long periods of time may

cause a burn.

Avoid blocking the vent

at the bottom or side

of the computer when

using it on a bed or

cushion.

If the vent is blocked,

there is a danger of

damaging the computer or

overheating the inside of

the computer.

The power plug and

wall outlet gures may

differ depending on the

country specications

and the product model.

Do not touch the main

plug or power cord with

wet hands.

There is a danger of

electric shock.

Do not exceed the

standard capacity

(voltage/current) of a

multi-plug or power

outlet extension when

using it for the product.

This may result in electric

shock or re.

Power Related

If the power cord or

power outlet makes a

noise, disconnect the

power cord from the

wall outlet and contact a

service center.

This may result in electric

shock or re.

Do not use a damaged or

loose main plug or power

cord or power outlet.

This may result in electric

shock or re.

Plug the power cord

rmly into the power

outlet and AC adapter.

Failing to do so may result

in electric shock or re.

Do not unplug the power

cord out by pulling the

cable only.

If the cord is damaged, it

may result in electric shock

or re.

Do not bend the power

cord excessively or do

not place a heavy object

over the power cord. It is

especially important to

keep the power cord out

of reach of infants and

pets.

If the cord is damaged, it

may cause electric shock or

re.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Do not place heavy

objects or step onto

the power cord or

AC adapter to avoid

damaging the power

cord or AC adapter.

If the cord is damaged,

there is a danger of electric

shock or re.

Use only the AC adapter

supplied with the

product.

Using another adapter may

cause the screen to icker.

Connect the power cord

to the AC adapter rmly.

Otherwise, there is a

danger of re due to an

incomplete contact.

AC Adapter Usage Precautions

If any foreign substance

such as water enters

the power input jack,

AC adapter or the

computer, disconnect

the power cord and

contact the service

center.

Damage to the device

within the computer may

result in electric shock or

re hazard.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Keep the battery out of

the reach of infants and

pets, as they could put

the battery into their

mouths.

There is a danger of electric

shock or choking.

Authorized

Parts

Use an authorized battery

and AC adapter only.

Please use an authorized

battery and adapter

approved by Samsung

Electronics.

Unauthorized batteries and

adapters may not meet the

proper safety requirements

and may cause problems or

malfunctions and result in

an explosion or re.

Do not use the computer

in a badly ventilated

location such as on

bedding, on a pillow or

cushion, etc, and do

not use it in a location

such as room with oor

heating as it may cause

the computer to be

oveerheated.

Take care that the

computer vents (on the

side or the bottom) are not

blocked especially in these

environments. If the vents

are blocked, the computer

may overheat and it may

cause a computer problem,

or even an explosion.

Battery Usage Related

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Do not use the computer

in a humid location such

as a bathroom or sauna.

Please use the computer

within the recommended

temperature and humidity

range (10~32ºC, 20~80%

RH).

Power Off

Do not close the LCD

panel and put the

computer into your bag

to move it when it is still

turned on.

If you put the computer into

your bag without turning

it off, the computer may

overheat and there is a

danger of re. Shut the

computer down properly

before moving it.

Never heat the battery

or put the battery into a

re. Do not put or use the

battery in a hot location

such as a sauna, inside

a vehicle exposed to the

heat, and so on.

There is a danger of an

explosion or re.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Take care not to allow

metal objects such as a

key or clip to touch the

battery terminal (metal

parts).

If a metal object touches

the battery terminals, it

may cause excessive

current ow and it may

damage the battery, or

result in a re.

If liquid leaks out of

the battery or there is

a funny smell coming

from the battery, remove

the battery from the

computer and contact a

service center.

There is a danger of an

explosion or re.

To use the computer

safely, replace a dead

battery with a new,

authorized battery.

Please charge the

battery fully before

using the computer

for the rst time.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Disconnect all cables

connected to the

computer before cleaning

it. If you are cleaning

a notebook computer,

remove the battery.

There is a danger of electric

shock or damage to the

product.

Do not connect a phone

line connected to a digital

phone to the modem.

There is a danger of a

electric shock, re or

damage to the product.

Do not place any

container lled with water

or chemicals over or near

the computer.

If water or chemicals enter

the computer, this may

cause re or electric shock.

If the computer is broken

or dropped, disconnect

the power cord and

contact a service center

for a safety check.

Using a damaged computer

may result in electric shock

or re.

Avoid leaving the

computer exposed to

direct sunlight when the

computer is in a badly

ventilated location such

as inside a vehicle.

This may result in

overheating, re or being

stolen.

Usage Related

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Upgrade Related

Never disassemble the

power supply or AC

adapter.

There is a danger of electric

shock.

When removing the RTC

(Real Time Clock) battery,

keep it out of the reach

of children as they could

touch and/or swallow it.

There is a danger of

choking. If a child has

swallowed it, contact a

doctor immediately.

Use only authorized

parts (multi-plug, battery

and memory) and never

disassemble parts.

This may result in damage

to the product, electric

shock or re.

Shut down the computer

and disconnect all cables

before disassembling

the computer. If there is

a modem, disconnect

the phone line. If you

are disassembling a

notebook computer,

make sure to remove the

battery.

Failing to do so, may cause

electric shock.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Custody and Movement Related

Follow the instructions

for the relevant location

(e.g. airplane, hospital,

etc.) when using a

wireless communication

device (wireless LAN,

Bluetooth, etc.).

When carrying the

notebook computer with

other items, such as the

adapter, mouse, books

etc, take care not to

press anything against

the notebook computer.

If a heavy object is

pressed against the

notebook computer, a

white spot or stain may

appear on the LCD.

Therefore, take care not to

apply any pressure to the

notebook.

In this case, place the

notebook computer in a

separate compartment

away from the other

objects.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

Installation Related Battery Usage

Do not block the ports

(holes), vents, etc. of the

product and do not insert

objects.

Damage to a component

within the computer may

cause electric shock or re.

When using the computer

with it lying on its side,

place it so that the vents

face upwards.

Failing to do so, may cause

the internal temperature of

the computer to rise and

the computer to malfunction

or halt.

Do not place a heavy

object over the product.

This may cause a problem

with the computer. In

addition, the object may

fall and cause injury, or

damage the computer.

Dispose of worn-out

batteries properly.

■ There is a danger of re

or explosion.

■ The battery disposal

method may differ

depending on your

country and region.

Dispose of the

used battery in an

appropriate way.

Do not throw or

disassemble the battery

and do not put it into

water.

This may cause an injury,

re or explosion.

Use only a battery

authorized by Samsung

Electronics.

Failing to do so may cause

an explosion.

Avoid contact with metal

objects such as car keys

or clips when keeping or

carrying a battery.

Contact with a metal may

cause excessive current

and a high temperature

and may damage the

battery or cause a re.

Charge the battery

according to the

instructions in the

manual.

Failing to do so, may cause

an explosion or re from

damage to the product.

Do not heat the battery

or expose it to heat (e.g.

inside a vehicle during

the summer).

There is a danger of

explosion or re.

Usage Related

Do not place a candle,

light cigar, etc. over or

on the product.

There is a danger of re.

Use a wall outlet or

multi-plug with a

grounding part.

Failing to do so may result

in electric shock.

Make sure to have the

product tested by a

safety service engineer

after repairing the

product.

Authorized Samsung

Repair Centers will carry

out safety checks after a

repair. Using a repaired

product without testing it

for safety may cause an

electric shock or re.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

In case of lightning,

immediately turn the

system off, disconnect

the power cord from the

wall outlet and phone line

from modem. Do not use

a modem or phone.

There is a danger of electric

shock or re.

Do not use your computer

and AC-Adapter on your

lap or soft surfaces.

If the computer temperature

increases, there is a danger

of burning yourself.

Connect only permitted

devices to the connectors

or ports of the computer.

Failing to do so, may cause

electric shock and re.

Close the LCD panel

only after checking if the

notebook computer is

turned off.

The temperature may

rise and it may cause

overheating and

deformation of the product.

Do not press the Eject

Button while the Floppy

Disk/CD-ROM drive is in

operation.

You might lose data and

the disk might be suddenly

ejected and could cause an

injury.

Take care not to drop the

product while using it.

This may cause personal

injury or loss of data.

Do not touch the antenna

with electricity facility

such as the power outlet.

There is a danger of electric

shock.

When handling

computer parts, follow

the instructions on the

manual supplied with the

parts.

Failing to do so, may cause

damage to the product.

If the computer emits

smoke, or there is a

burning smell, disconnect

the power plug from the

wall outlet and contact

a service center. If your

computer is a notebook

computer, make sure to

remove the battery.

There is a danger of re.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

Upgrade Related

Do not use a damaged or

modied CD/Floppy Disk.

There is a danger of

damaging the product or

personal injury.

Do not insert your ngers

into the PC Card Slot.

There is a danger of injury

or electric shock.

Use recommended

computer cleansing

solution when cleaning

the product and only use

the computer when it is

completely dried.

Failing to do so may cause

electric shock or re.

Emergency disk eject

method using paperclip

should not be used while

the disk is in motion.

Make sure to use the

emergency disk eject

method only when the

Optical Disk Drive is

stopped.

There is a danger of injury.

Do not place your face

close to the Optical Disk

Drive tray when it is

operating.

There is a danger of injury

due to an abrupt ejection.

Check CDs for cracks and

damage prior to use.

It may damage the disc and

cause disorder of device

and injury of user.

Take care when

touching the product or

parts.

The device may be

damaged or you may be

injured.

Take care not to throw

or drop a computer

part or device.

This may cause injury or

damage to the product.

Make sure to close the

computer cover before

connecting the power

after a reassembly.

There is a danger of

electric shock if your

body touches an internal

part.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

Use parts authorized

by Samsung

Electronics only.

Failing to do so, may

cause re or damage the

product.

Never disassemble or

repair the product by

yourself.

There is a danger of

electric shock or re.

To connect a

device that is not

manufactured

or authorized by

Samsung Electronics,

enquire at your

service center before

connecting the device.

There is a danger of

damaging the product.

Custody and Movement Related

When moving the

product, turn the power

off and separate all

connected cables rst.

The product might be

damaged or users may trip

over the cables.

For long periods of not

using the notebook

computer, discharge the

battery and preserve as

it is detached.

The battery will be

preserved at its best

condition.

Do not operate or watch

the computer while

driving a vehicle.

There is a danger of a

trafc accident. Please

concentrate on driving.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

Cautions on Preventing Data Loss (Hard Disk Management)

Take care not to damage the data on a

hard disk drive.

■ A hard disk drive is so sensitive to

external impact that an external impact

may cause loss of data on the surface

of the disk.

■ Take extra care, because moving the

computer or an impact on the computer

when it is turned on may damage the

data of the hard disk drive.

■ The company is not liable for any loss

of any data caused by a customer’s

careless usage or bad environmental

conditions.

Causes that may damage the data of a

hard disk drive and the hard disk drive

itself.

■ The data may be lost when an external

impact is applied to the disk while

disassembling or assembling the

computer.

■ The data may be lost when the

computer is turned off or reset by a

power failure while the hard disk drive is

operating.

■ The data may be lost and irrecoverable

due to a computer virus infection.

■ The data may be lost if the power is

turned off while running a program.

■ Moving or causing an impact to the

computer while the hard disk drive

is operating, may cause les to be

corrupted or bad sectors on the hard

disk.

To prevent data loss due to damage to the hard disk drive, please backup your

data frequently.

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the

product.

Proper Posture

Adjust the heights of desks and chairs

appropriate to your height.

The heights are to be adjusted so that

your arm forms a right angle when you

place your hand over the keyboard while

sitting down on a chair.

Adjust the height of chair so that your heel

is comfortably placed on the oor.

 Do not use the computer while you

are lying down, but only while you are

sitting down.

 Do not use the computer on your lap.

If the computer temperature increases,

there is a danger of burning yourself.

 Work while keeping your back straight.

 Use a chair with a comfortable back.

 Keep the center of your leg weight not

on the chair but on your feet when you

are sitting on a chair.

 To use the computer while talking over

the telephone, use a headset. Using

the computer with the phone on your

shoulder is bad for posture.

 Keep frequently used items within a

comfortable work range (where you

can reach them with your hands).

Proper Posture During Computer Use

Maintaining a proper posture during computer use is very important to prevent physical

harm.

The following instructions are about maintaining a proper posture during computer use

developed through human engineering. Please read and follow them carefully when

using the computer.

Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations

may increase and serious physical harm may be caused.

The instructions in this manual have been prepared so that they can be applied within

the coverage of general users.

If the user is not included in the coverage, the recommendation is to be applied

according to the user’s needs.

Eye Position

Keep the monitor or LCD away from

your eyes by at least 50cm.

50cm

 Adjust the height of the monitor and

the LCD screen so that its top height is

equal to or lower than your eyes.

 Avoid setting the monitor and LCD

excessively bright.

 Keep the monitor and LCD screen

clean.

 If you wear glasses, clean them before

using the computer.

 When entering contents printed on a

paper into the computer, use a static

paper holder so that the height of the

paper is almost equal to that of the

monitor.

Hand Position

Keep your arm at a right angle as

shown by the gure.

 Keep the line from your elbow to your

hand straight.

 Do not place your palm over the

keyboard while typing.

 Do not hold the mouse with excessive

force.

 Do not press the keyboard, touchpad or

mouse with excessive force.

 It is recommended connecting an

external keyboard and mouse when

using the computer for long periods of

time.

Volume Control

(Headphones and Speakers)

Check your volume rst to listen to

music.

Check your

volume!!

 Check if the volume is too loud before

using headphones.

 It is not recommended using

headphones for long periods of time.

 Any deviation from the equalizer

default setting could cause hearing

impairment.

 The default setting can be changed

through software and driver updates

without your intervention. Please check

the equalizer default setting before rst

usage.

Use Time (Break Time)

 Take a break for 10 minutes or more

after a 50-minute period when working

for more than one hour.

Illumination

 Do not use the computer in dark

locations. The illumination level for

computer use must be as bright so for

reading a book.

 Indirect illumination is recommended.

Use a curtain to prevent reection on

the LCD screen.

Operation Condition

 Do not use the computer in hot and

humid locations.

 Use the computer within the allowed

temperature and humidity range

specied in the User Guide.

Safety Instructions

Your system is designed and tested

to meet the latest standards for safety

of information technology equipment.

However, to ensure safe use of this

product, it is important that the safety

instructions marked on the product and in

the documentation are followed.

Always follow these instructions to

help guard against personal injury

and damage to your system.

Setting Up your System

 Read and follow all instructions

marked on the product and in the

documentation before you operate your

system. Retain all safety and operating

instructions for future use.

 Do not use this product near water or a

heat source such as a radiator.

 Set up the system on a stable work

surface.

 The product should be operated only

with the type of power source indicated

on the rating label.

 Ensure that the electrical outlet you

are using to power your equipment is

easily accessible in case of re or short

circuit.

 If your computer has a voltage selector

switch, make sure that the switch is in

the proper position for your area.

 Openings in the computer case are

provided for ventilation. Do not block

or cover these openings. Make sure

you provide adequate space, at least 6

inches (15 cm), around the system for

ventilation when you set up your work

area. Never insert objects of any kind

into the computer ventilation openings.

 Ensure that the fan vents on the bottom

of the casing are clear at all times.

Do not place the computer on a soft

surface, doing so will block the bottom

vents.

 If you use an extension cord with this

system, make sure that the total power

rating on the products plugged into the

extension cord does not exceed the

extension cord power rating.

Important Safety Information

Care During Use

 Do not walk on the power cord or allow anything to rest on it.

 Do not spill anything on the system. The best way to avoid spills is to not eat or drink

near your system.

 Some products have a replaceable CMOS battery on the system board. There is a

danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery

with the same or equivalent type recommended by the manufacturer.

Dispose of batteries according to the manufacturers instructions. If the CMOS battery

requires replacement insure that a qualied technician performs the task.

 When the computer is turned off, a small amount of electrical current still ows

through the computer.

To avoid electrical shock, always unplug all power cables, remove the battery and

modem cables from the wall outlets before cleaning the system.

 Unplug the system from the wall outlet and refer servicing to qualied personnel if:

– The power cord or plug is damaged.

– Liquid has been spilled into the system.

– The system does not operate properly when the operating instructions are followed.

– The system was dropped or the casing is damaged.

– The system performance changes.

The Instruction On Safety Operation of NotePC

z When installing and operating devices please refer to safety requirements in the

user guide.

x Devices can be used only with the equipment specied in the technical

specications of the devices.

c If any smell of burning or smoke is detected from the computer the unit should

be switched off and battery removed. The unit should be checked by a qualied

technician before reuse.

v Service and repair of devices should be carried out by authorized service centers.

b Do not allow your portable computer to operate with the base resting directly on

exposed skin for extended periods of time. The surface temperature of the base

will rise during normal operation (particularly when AC Power is present). Allowing

sustained contact with exposed skin can cause discomfort or eventually a burn.

Battery Disposal

Do not put rechargeable batteries or products powered by non-removable

rechargeable batteries in the garbage.

Contact the Samsung Helpline for information on how to dispose of batteries that you

cannot use or recharge any longer.

Follow all local regulations when disposing of old batteries.

THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Replacement Parts and Accessories

Use only replacement parts and accessories recommended by manufacturer.

To reduce the risk of re, use only No. 26 AWG or larger telecommunications line cord.

Do not use this product in areas classied as hazardous. Such areas include patient

care areas of medical and dental facilities, oxygen rich environments, or industrial

areas.

Laser Safety

All systems equipped with CD or DVD drives comply with the appropriate safety

standards, including IEC 60825-1. The laser devices in these components are classied

as “Class 1 Laser Products” under a US Department of Health and Human Services

(DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact

an authorized service location.

 Laser Safety Note:

Use of controls or adjustments or performance of procedures other than those

specied in this manual may result in hazardous radiation exposure. To prevent

exposure to laser beams, do not try to open the enclosure of a CD or DVD drive.

 Class 1M laser radiation when operating part is open.

Do not view directly with optical instruments.

 Class 3B invisible laser radiation when open.

Avoid exposure to the beam.

Connect and Disconnect the AC adapter

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Do not unplug the power cord out by pulling the cable only.

Power Cord Requirements

The power cord set (wall plug, cable and AC adapter plug) you received with your

computer meets the requirements for use in the country where you purchased your

equipment.

Power cord sets for use in other countries must meet the requirements of the country

where you use the computer. For more information on power cord set requirements,

contact your authorized dealer, reseller, or service provider.

General Requirements

The requirements listed below are applicable to all countries:

 The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of

9.75 feet (3.0m).

 All power cord sets must be approved by an acceptable accredited agency

responsible for evaluation in the country where the power cord set will be used.

 The power cord set must have a minimum current capacity of 7 A and a nominal

voltage rating of 125 or 250 volts AC, as required by each country’s power system.

 The appliance coupler must meet the mechanical conguration of an EN 60 320/IEC

320 Standard Sheet C7 connector, for mating with appliance inlet on the computer.

Regulatory Compliance Statements

Wireless Guidance

(If tted with 2.4G band or 5G band)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication

devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your

notebook system. The following section is a general overview of considerations while

operating a wireless device.

Additional limitations, cautions, and concerns for specic countries are listed in the

specic country sections (or country group sections). The wireless devices in your

system are only qualied for use in the countries identied by the Radio Approval Marks

on the system rating label. If the country you will be using the wireless device in, is not

listed, please contact your local Radio Approval agency for requirements. Wireless

devices are closely regulated and using them may not be allowed.

The RF eld strength of the wireless device or devices that may be embedded in your

notebook are well below all international RF exposure limits as known at this time.

Because the wireless devices (which may be embedded into your notebook) emit less

energy than is allowed in radio frequency safety standards and recommendations,

manufacturer believes these devices are safe for use. Regardless of the power levels,

care should be taken to minimize human contact during normal operation.

Some circumstances require restrictions on wireless devices. Examples of common

restrictions are listed on the next page:

 Radio frequency wireless communication can interfere with equipment on

commercial aircraft. Current aviation regulations require wireless devices to be

turned off while traveling in an airplane.

802.11ABGN (also known as wireless Ethernet or Wi) and Bluetooth

communication devices are examples of devices that provide wireless

communication.

 In environments where the risk of interference to other devices or services is

harmful or perceived as harmful, the option to use a wireless device may be

restricted or eliminated. Airports, Hospitals, and Oxygen or ammable gas laden

atmospheres are limited examples where use of wireless devices may be restricted

or eliminated. When in environments where you are uncertain of the sanction to use

wireless devices, ask the applicable authority for authorization prior to use or turning

on the wireless device.

 Every country has different restrictions on the use of wireless devices. Since your

system is equipped with a wireless device, when traveling between countries with

your system, check with the local Radio Approval authorities prior to any move or

trip for any restrictions on the use of a wireless device in the destination country.

 If your system came equipped with an internal embedded wireless device, do not

operate the wireless device unless all covers and shields are in place and the

system is fully assembled.

 Wireless devices are not user serviceable. Do not modify them in any way.

Modication to a wireless device will void the authorization to use it. Please contact

manufacturer for service.

 Only use drivers approved for the country in which the device will be used. See the

manufacturer System Restoration Kit, or contact manufacturer Technical Support for

additional information.

USA and Canada Safety

Requirements and Notices

Do not touch or move antenna while the

unit is transmitting or receiving.

Do not hold any component containing

the radio such that the antenna is very

close or touching any exposed parts of

the body, especially the face or eyes,

while transmitting.

Do not operate the radio or attempt

to transmit data unless the antenna

is connected; if not, the radio may be

damaged.

Use in specic environments:

The use of wireless devices in hazardous

locations is limited by the constraints

posed by the safety directors of such

environments.

The use of wireless devices on airplanes

is governed by the Federal Aviation

Administration (FAA).

The use of wireless devices in hospitals

is restricted to the limits set forth by each

hospital.

Explosive Device Proximity

Warning

Do not operate a portable transmitter

(such as a wireless network device)

near unshielded blasting caps or in

an explosive environment unless

the device has been modied to be

qualied for such use.

Use On Aircraft Caution

Regulations of the FCC and FAA

prohibit airborne operation of radio-

frequency wireless devices because

their signals could interfere with

critical aircraft instruments.

Other Wireless Devices

Safety Notices for Other Devices in

the Wireless Network: Refer to the

documentation supplied with wireless

Ethernet adapters or other devices in the

wireless network.

The Part 15 radio device operates on

a non-interference basis with other

devices operating at this frequency.

Any changes or modication to said

product not expressly approved by

Intel could void the user’s authority to

operate this device.

United States of America

Unintentional Emitter per FCC Part

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions:(1) this device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation.

This equipment has been tested

and found to comply with the limits

for a Class B digital device pursuant

to Part 15 of the FCC Rules. These

limits are designed to provide

reasonable protection against

harmful interference in a residential

installation. This equipment

generates, uses, and can radiate

radio frequency energy and if not

installed and used in accordance

with the instructions may cause

harmful interference which will not

occur in a correct installation. If

this equipment does cause harmful

interference to radio or television

reception, which can be determined

by turning the equipment off and

on, the user is encouraged to try to

correct the interference by one or

more of the following measures:

 Reorient or relocate the receiving

antenna.

 Increase the separation between

the equipment and receiver.

 Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

 Consult the dealer or an

experienced radio/TV technician

for help.

If necessary, the user should consult the

dealer or an experienced radio/television

technician for additional suggestions.

The user may nd the following booklet

helpful: “Something About Interference.”

This is available at FCC local regional

ofces. Our company is not responsible

for any radio or television interference

caused by unauthorized modications

of this equipment or the substitution or

attachment of connecting cables and

equipment other than those specied

by our company. The correction will be

the responsibility of the user. Use only

shielded data cables with this system.

Intentional emitter per FCC Part 15

(If tted with 2.4G band or 5G band)

Low power, Radio LAN type devices

(radio frequency (RF) wireless

communication devices), operating in

the 2.4GHz/5GHz Band, may be present

(embedded) in your notebook system.

This section is only applicable if these

devices are present. Refer to the system

label to verify the presence of wireless

devices.

Wireless devices that may be in your

system are only qualied for use in the

United States of America if an FCC ID

number is on the system label.

This device is restricted to indoor use

due to its operation in the 5.15 to 5.25

GHz frequency range. FCC requires

this product to be used indoors for

the frequency range 5.15 to 5.25 GHz

to reduce the potential for harmful

interference to co-channel Mobile Satellite

systems. High power radars are allocated

as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar

stations can cause interference with and

/or damage this device.

The power output of the wireless device

(or devices), which may be embedded

in your notebook, is well below the RF

exposure limits as set by the FCC.

This transmitter must not be collocated

or operate in conjunction with any other

antenna or transmitter except the installed

Bluetooth transmitter.

Operation of this device is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation of the device.

Wireless devices are not user

serviceable. Do not modify them in

any way.

Modication to a wireless device

will void the authorization to use it.

Contact manufacturer for service.

FCC Part 68

(If tted with a modem device.)

This equipment compiles with part

of the FCC rules. On the back of this

equipment is a label that contains, among

other information, the FCC registration

number and ringer equivalence number

(REN) for this equipment. If requested,

this information must be provided to the

telephone company.

This equipment uses the following USOC

jacks : RJ11C

An FCC compliant telephone cord

and modular plug is provided with this

equipment. This equipment is designed

to be connected to the telephone network

or promises wiring using a compatible

modular jack which is Part 68 compliant.

See Installation Instructions for details.

The REN is used to determine the

quantity of devices which may be

connected to telephone line. Excessive

RENs on the telephone line may result in

the devices not ringing in response to an

incoming call. In most, but not all areas,

the sum of RENs should not exceed

ve (5.0). To be certain of the number of

devices that may be connected to a line,

as determined by total RENs, contact the

local telephone company to determine the

maximum REN for the calling area.

If the terminal equipment causes harm

to the telephone network, the Telephone

Company will notify you in advance that

temporary discontinuance of service may

be required. But if advance notice is not

practical, the telephone company will

notify the customer as soon as possible.

Also, you will be advised of your right

to le a complaint with the FCC if you

believe it is necessary.

The telephone company may make

changes in its facilities, equipment,

operations, or procedures that could

affect the operation of the equipment. If

this happens, the telephone company

will provide advanced notice in order for

you to make necessary modications to

maintain uninterrupted service.

If trouble is experienced with this

equipment (Modem) for repair or warranty

information, please contact your local

distributor. If the equipment is causing

harm to the telephone network, the

telephone company may request that

you disconnect the equipment until the

problem is resolved.

The user must use the accessories and

cables supplied by the manufacturer

to get optimum performance from the

product.

No repairs may be done by the customer.

This equipment cannot be used on public

coin phone service provided by the

telephone company. Connection to party

line service is subject to state tariffs.

The Telephone Consumer Protection Act

of 1991 makes it unlawful for any person

to use a computer or other electronic

device, including fax machines, to send

any message unless such message

clearly contains in a margin at the top or

bottom of each transmitted page or on

the rst page of the transmission, the date

and time it is sent and an identication

of the business or other entity, or other

individual sending the message and

the telephone number of the sending

machine or such business, other entity,

or individual. (The telephone number

provided may not be any number for

which charges exceed local or long-

distance transmission charges.)

In order to program this information

into your fax machine, refer to your

communications software user manual.

Unintentional Emitter per ICES-003

This digital apparatus does not exceed

the Class B limits for radio noise

emissions from digital apparatus as set

out in the radio interference regulations of

Industry Canada.

Le présent appareil numérique n’émet

pas de bruits radioélectriques dépassant

les limitesapplicables aux appareils

numériques de Classe B prescrites

dans le règlement sur le brouillage

radioélectrique édicté par Industrie

Canada.

Canada

Intentional Emitter per RSS 210

(If tted with 2.4G band or 5G band)

Low power, Radio LAN type devices

(radio frequency (RF) wireless

communication devices), operating in

the 2.4GHz/5GHz Band, may be present

(embedded) in your notebook system.

This section is only applicable if these

devices are present. Refer to the system

label to verify the presence of wireless

devices.

Wireless devices that may be in your

system are only qualied for use in

Canada if an Industry Canada ID number

is on the system label.

When using IEEE 802.11a wireless LAN,

this product is restricted to indoor use

due to its operation in the 5.15- to 5.25-

GHz frequency range. Industry Canada

requires this product to be used indoors

for the frequency range of 5.15 GHz to

5.25 GHz to reduce the potential for

harmful interference to co-channel mobile

satellite systems. High power radar is

allocated as the primary user of the

5.25- to 5.35-GHz and 5.65 to 5.85-GHz

bands. These radar stations can cause

interference with and/or damage to this

device.

The maximum allowed antenna gain for

use with this device is 6dBi in order to

comply with the E.I.R.P limit for the 5.25-

to 5.35 and 5.725 to 5.85 GHz frequency

range in point-to-point operation.

The power output of the wireless device

(or devices), which may be embedded

in your notebook, is well below the

RF exposure limits as set by Industry

Canada.

This transmitter must not be collocated

or operate in conjunction with any other

antenna or transmitter except the installed

Bluetooth transmitter.

Operation of this device is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation of the device.

To prevent radio interference to

licensed service, this device is

intended to be operated indoors

and away from windows to provide

maximum shielding. Equipment (or

its transmit antenna) that is installed

outdoors is subject to licensing.

Wireless devices are not user

serviceable. Do not modify them in

any way. Modication to a wireless

device will void the authorization

to use it. Contact manufacturer for

service.

Telecommunications per DOC

notice (for products tted with an

IC-compliant modem)

The Industry Canada label identies

certied equipment. This certication

means that the equipment meets certain

telecommunications network protective,

operation, and safety requirements.

The Department does not guarantee

the equipment will operate to the users’

satisfaction.

Before installing this equipment, users

should make sure that it is permissible

to be connected to the facilities of the

local telecommunications company. The

equipment must also be installed using

an acceptable method of connection. In

some cases, the inside wiring associated

with a single-line individual service may

be extended by means of a certied

connector assembly. The customer

should be aware that compliance with

the above conditions may not prevent

degradation of service in some situations.

Repairs to certied equipment should

be made by an authorized Canadian

maintenance facility designated by

the supplier. Any repairs or alterations

made by the user to this equipment, or

equipment malfunctions, may give the

telecommunications company cause

to request the user to disconnect the

equipment.

Users should make sure, for their own

protection, that the electrical ground

connections of the power utility, telephone

lines, and internal metallic water pipe

system, if present, are connected

together. This precaution may be

particularly important in rural areas.

To avoid electrical shock or

equipment malfunction do not

attempt to make electrical ground

connections by yourself. Contact the

appropriate inspection authority or an

electrician, as appropriate.

The Ringer Equivalence Number (REN)

assigned to each terminal device provides

an indication of the maximum number

of terminals allowed to be connected to

a telephone interface. The termination

on an interface may consist of any

combination of devices subject only to the

requirement that the sum of the Ringer

Equivalence Numbers of all the devices

does not exceed 5.

European Union CE Marking and

Compliance Notices

Products intended for sale within the

European Union are marked with the

Conformité Européene (CE) Marking,

which indicates compliance with the

applicable Directives and European

standards and amendments identied

below. This equipment also carries the

Class 2 identier.

The following information is only

applicable to systems labeled with the CE

mark .

European Directives

This Information Technology Equipment

has been tested and found to comply with

the following European directives:

 EMC Directive 2004/108/EC

 Low Voltage Directive 2006/95/EC

 R&TTE Directive 1999/5/EC

Manufacturer Information

Samsung Electronics Co., Ltd.

416, Maetan-3Dong, Yeongtong-Gu,

Suwon-City, Gyeonggi-Do, 443-742,

Korea

Samsung Electronics Suzhou Computer

CO., LTD

No. 198, Fangzhou Road, Suzhou

Industrial Park, Jiangsu Province, 215021,

China

Tel:+86-512-6253-8988

For the web or the phone number of

Samsung Service Centre, see the

Warranty or contact the retailer where you

purchased your product.

European Union

European Radio Approval

Information (for products tted with

EU-approved radio devices)

This Product is a Notebook computer;

low power, Radio LAN type devices (radio

frequency (RF) wireless communication

devices), operating in the 2.4GHz/5GHz

band, may be present (embedded) in your

notebook system which is intended for

home or ofce use. This section is only

applicable if these devices are present.

Refer to the system label to verify the

presence of wireless devices.

Wireless devices that may be in your

system are only qualied for use in the

European Union or associated areas

if a CE mark with a Notied Body

Registration Number and the Alert

Symbol is on the system label.

The power output of the wireless device

or devices that may be embedded in you

notebook is well below the RF exposure

limits as set by the European Commission

through the R&TTE directive.

The low band 5.15 - 5.35 GHz is for

indoor use only.

See 802.11b and 802.11g restrictions

for specic countries or regions

within countries under the heading

“European Economic Area

Restrictions” below.

EU R&TTE Compliance Statements

Česky

[Czech]

Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se

základními požadavky a dalšími příslušnými ustanoveními směrnice

1999/5/ES.

Dansk

[Danish]

Undertegnede Samsung erklærer herved, at følgende udstyr Notebook

PC overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

Deutsch

[German]

Hiermit erklärt Samsung, dass sich das Gerät Notebook PC in

Übereinstimmung mit den grundlegenden Anforderungen und den

übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG be ndet.

Eesti

[Estonian]

Käesolevaga kinnitab Samsung seadme Notebook PC vastavust

direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

English Hereby, Samsung, declares that this Notebook PC is in compliance with

the essential requirements and other relevant provisions of Directive

1999/5/EC.

Español

[Spanish]

Por medio de la presente Samsung declara que el Notebook PC

cumple con los requisitos esenciales y cualesquiera otras disposiciones

aplicables o exigibles de la Directiva 1999/5/CE.

Ελληνική

[Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ

ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français

[French]

Par la présente Samsung déclare que l’appareil Notebook PC est

conforme aux exigences essentielles et aux autres dispositions

pertinentes de la directive 1999/5/CE.

Italiano

[Italian]

Con la presente Samsung dichiara che questo Notebook PC è

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti

stabilite dalla direttiva 1999/5/CE.

Latviski

[Latvian] Ar šo Samsung deklarē, ka Notebook PC atbilst Direktīvas 1999/5/EK

būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių

[Lithuanian] Šiuo Samsung deklaruoja, kad šis Notebook PC atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Nederlands

[Dutch]

Hierbij verklaart Samsung dat het toestel Notebook PC in

overeenstemming is met de essentiële eisen en de andere relevante

bepalingen van richtlijn 1999/5/EG.

Malti

[Maltese]

Hawnhekk, Samsung, jiddikjara li dan Notebook PC jikkonforma mal-

ħtiāijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm  d-

Dirrettiva 1999/5/EC.

Magyar

[Hungarian]

Alulírott, Samsung nyilatkozom, hogy a Notebook PC megfelel a

vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb

elõírásainak.

Polski

[Polish]

Niniejszym Samsung oświadcza, Ŝe Notebook PC jest zgodny

z zasadniczymi wymogami oraz pozostałymi stosownymi

postanowieniami Dyrektywy 1999/5/EC.

Português

[Portuguese] Samsung declara que este Notebook PC está conforme com os

requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko

[Slovenian] Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami

in ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky

[Slovak] Samsung týmto vyhlasuje, že Notebook PC spĺňa základné požiadavky

a všetky príslušné ustanovenia Smernice 1999/5/ES.

Suomi

[Finnish]

Samsung vakuuttaa täten että Notebook PC tyyppinen laite on

direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen.

Svenska

[Swedish]

Härmed intygar Samsung att denna Notebook PC står I

överensstämmelse med de väsentliga egenskapskrav och övriga

relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Íslenska

[Icelandic] Hér með lýsir Samsung y r því að Notebook PC er í samræmi við

grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Norsk

[Norwegian] Samsung erklærer herved at utstyret Notebook PC er i samsvar med de

grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Türkiye

[Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin

temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.

To view the EU Declaration of Conformity for this product (in English only), go to: http://

www.samsung.com/uk/support/download/supportDownMain.do then search the model

number of the product. If the Declaration of Conformity for the model you are interested

in is not available on our web-site, please contact your distributor.

European Economic Area Restrictions

Local Restriction of 802.11b/802.11g

Radio Usage

[Note to integrator: The following

statements on local restrictions must be

published in all end-user documentation

provided with the system or product

incorporating the wireless product.]

Due to the fact that the frequencies

used by 802.11b/802.11g wireless

LAN devices may not yet be

harmonized in all countries,

802.11b/802.11g products are

designed for use only in specic

countries or regions, and are not

allowed to be operated in countries

or regions other than those of

designated use.

As a user of these products, you

are responsible for ensuring that

the products are used only in the

countries or regions for which they

were intended and for verifying

that they are congured with the

correct selection of frequency and

channel for the country or region of

use. Any deviation from permissible

settings and restrictions in the

country or region of use could be an

infringement of local law and may be

punished as such.

The European variant is intended for

use throughout the European Economic

Area. However, authorization for use is

further restricted in particular countries or

regions within countries, as follows:

General

European standards dictate maximum

radiated transmit power of 100 mW

effective isotropic radiated power (EIRP)

and the frequency range 2400 – 2483.5

MHz.

The low band 5.15 - 5.35 GHz is for

indoor use only.

Belgium

The product may be used outdoors, but

for outdoor transmissions over a distance

of 300m or more, a license from the BIPT

is required.

This restriction should be indicated in the

manual as follows:

Dans le cas d’une utilisation privée, à

l’extérieur d’un bâtiment, au-dessus d’un

espace public, aucun enregistrement n’est

nécessaire pour une distance de moins

de 300m. Pour une distance supérieure

à 300m un enregistrement auprès de

l’IBPT est requise. Pour une utilisation

publique à l’extérieur de bâtiments, une

licence de l’IBPT est requise. Pour les

enregistrements et licences, veuillez

contacter l’IBPT.

France

For Metropolitan departments:

2.400 - 2.4835 GHz for indoor use.

2.400 - 2.454 GHz (channels 1 to 7) for

outdoor use.

For Guadeloupe, Martinique, St Pierre et

Miquelon, Mayotte:

2.400 - 2.4835 GHz for indoor and

outdoor use.

For Reunion, Guyane:

2.400 - 2.4835 GHz for indoor use.

2.420 - 2.4835 GHz for outdoor use

(channels 5 to 13)

The low band 5.15 - 5.35 GHz is for

indoor use only.

European Telecommunication

Information (for products tted with

EU-approved modems)

Marking by the symbol indicates

compliance of this equipment to the

Radio and Telecom Terminal Equipment

Directive 1999/5/EC. Such marking is

indicative that this equipment meets or

exceeds the following technical standards:

CTR 21 - Attachment requirements for

pan-European approval for connection to

the analogue Public Switched Telephone

Networks (PSTNs) of TE (excluding TE

supporting voice telephony services) in

which network addressing, if provided, is

by means of Dual Tone Multi-Frequency

(DTMF) signaling.

Although this equipment can use

either loop disconnect (pulse) or

DTMF (tone) signaling, only the

performance of the DTMF signaling

is subject to regulatory requirements

for correct operation.

It is therefore strongly recommended

that the equipment is set to use

DTMF signaling for access to public

or private emergency services.

DTMF signaling also provides faster

call setup.

This equipment has been approved to

Council Decision 98/482/EEC - “CTR

21” for Pan-European single terminal

connection to the Public Switched

Telephone Network (PSTN).

However, due to differences between

the individual PSTNs provided in

different countries, the approval does

not, of itself, give an unconditional

assurance of successful operation on

every PSTN termination point. In the

event of problems, you should contact

manufacturer Technical Support.

WEEE SYMBOL INFORMATION

Correct disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate

collection systems.)

This marking on the product, accessories or literature indicates that the product and

its electronic accessories (e.g. charger, headset, USB cable) should not be disposed

of with other household waste at the end of their working life. To prevent possible harm

to the environment or human health from uncontrolled waste disposal, please separate

these items from other types of waste and recycle them responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,

or their local government ofce, for details of where and how they can take these items

for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the

purchase contract. This product and its electronic accessories should not be mixed with

other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate

battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this

product should not be disposed of with other household waste at the end of their

working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the

battery contains mercury, cadmium or lead above the reference levels in EC Directive

2006/66. If batteries are not properly disposed of, these substances can cause harm to

human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries

from other types of waste and recycle them through your local, free battery return

system.

USA ONLY

This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin

cells in the product sold or distributed ONLY in California USA.

“Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/

hazardouswaste/perchlorate.”

Contains Mercury, Dispose According to Local, State or Federal Laws.

For details see lamprecycle.org, eise.org, or call 1-800-Samsung.

Overview

Front View

1Camera Lens (Optional) Using this lens, you can take still pictures and record video.

2Keyboard A device to enter data by pressing the keys. 60

3Touchpad/Touchpad

Buttons The touchpad and touchpad buttons provide functions

similar to the mouse ball and buttons. 63

4Power Switch Turns the computer on or off. 57

5Multi Card Slot

(Optional) A card slot that supports SD Card, SDHC and MMC. 68

6Status Indicators Shows the operating status of the computer.

The corresponding operating LED is lit when the

corresponding function operates. 52

7Microphone (Optional) You can use the built-in microphone.

8LCD The screen images are displayed here.

 Optional items may be changed or

may not be provided depending on

the computer model.

 The actual color and appearance

of the computer may differ from the

pictures used in this guide.

(Model A) (Model B)

Status Indicators

1Caps Lock This turns on when the Caps Lock key is pressed allowing capital

letters to be typed without holding the Shift button down.

2Hard Disk Drive Indicates that the hard disk drive is running.

3Wireless LAN This turns on when the wireless LAN is operating.

4Charge Status This shows the power source and the battery charge status.

Green: When the battery is fully charged or the battery is not

installed.

Amber: When the battery is being charged.

Off: When the computer is running on battery power without

being connected to AC adapter.

5Power This shows the computer operating status.

On: When the computer is operating.

Blinks: When the computer is in Sleep mode.

4 51 3

(Model A) (Model B)

Right View

1USB Port You can connect USB devices to the USB port such as a

keyboard/mouse, digital camera, etc.

2Security Lock Port You can connect a Kensington lock to the Security Lock Port

to prevent the computer from being stolen.

3DC Jack A jack to connect the AC adapter that supplies power to the

computer.

(Model A) (Model B)

1 2 3 1 2 3

Left View

1Wired LAN Port Connect the Ethernet cable to this port. 79

2Monitor Port A port used to connect a monitor, TV or projector supporting a

15pin D-SUB interface. 71

3Fan Vents The internal heat of the computer is emitted through these

holes.

If the vents are blocked the computer may overheat.

Avoid blocking the vents as this may be dangerous.

4Chargeable USB

Port (Optional) You can connect USB devices to the USB port such as a

keyboard/mouse, digital camera, etc.

(Chargeable USB: You can charge USB devices through the

USB port even when the computer is turned off.)

 Charging a device through a Chargeable USB takes

longer than using a regular charger.

 Press the F2 key when the Samsung logo appears in

the booting sequence to enter the BIOS Setup, select

Advanced > USB Charge In Sleep Mode, and set

it to Enable. Then you can use the Chargeable USB

Port feature even in sleep mode.

5Microphone Jack A jack used to connect the microphone.

6Headphone Jack A jack used to connect the headphones.

(Model A) (Model B)

21 3 4 5 6 21 3 4 5 6

Back View

1Battery This is a Lithium-Ion rechargeable battery that supplies power to

the computer. 100

(Model A) (Model B)

Bottom View

1Battery Latches The latch used to remove or install the battery. 101

2Memory Compartment

Cover The main memory is installed inside the cover. 98

3Speaker A device used to generate sound.

The speaker specications of the computer may

differ depending on the model.

(Model A) (Model B)

Turning the Computer On and Off

Turning the computer on

1 Install the battery and connect the

AC adapter.

(Refer to the Installation Guide.)

2 Lift the LCD panel up.

3 Slide the Power Switch to turn the

computer on.

 When running the computer on

battery power, the LCD brightness

is dimmed automatically to save

battery power.

Press the Fn + key to increase

the LCD brightness. 62

 When turning the computer on

for the rst time, the Register

Windows screen appears. You can

use the computer after registering

your user information.

 For detailed procedures on using

the operating system, refer to

the help section of the operating

system.

Turning the computer off

1 Click the Start button on the taskbar.

2 Click Turn Off Computer.

3 Click Turn Off.

 If the computer has not turned off properly due to a system error, press

<Ctrl>+<Alt>+<Delete>. When [Windows Task Manager] dialog box appears, click

Shut Down > Turn Off to turn off the computer. Your unsaved work may be lost/

damaged.

 If the computer does not shutdown due to a system error, slide and hold the Power

Switch for 4 seconds or more to shut the computer down by force. Your unsaved

work may be lost/damaged. The next time you turn on your computer, a hard disk

check will be performed, before Windows starts.

Chapter 2.

Using the computer

Keyboard 60

Touchpad 63

External-type CD drive (To be purchased) 66

Multi Card Slot (Optional) 68

Connecting a monitor / TV 71

Adjusting the Volume 75

Keyboard

Shortcut key functions and procedures are discussed in the following sections.

 The keyboard is supplied according to the corresponding country.

 The keyboard may differ depending on your country. The following mainly describes

the shortcut keys.

Shortcut Keys

You can use the following functions by pressing the keys below with the Fn key.

Fn+ Name Function

REST

(Sleep Mode) Switches to Sleep mode. To wake the computer up, press the

Power button.

Gauge

Shows the remaining battery charge.

You can only use this function when the Easy Display Manager

program is installed.

Euro Enters the Euro monetary unit symbol.

This key may not be provided depending on the keyboard type.

CRT/LCD Switches the screen output to the LCD or external monitor when

an external monitor (or TV) is connected to the computer. 72

Backlight Turns the LCD backlight on or off.

Mute Mutes or cancels mute.

Samsung

Magic Doctor System diagnosis, recovery and Internet consultation program,

Samsung Magic Doctor, will be launched. (Optional)

Fn+ Name Function

Easy

SpeedUp

Manager

You can select operation mode when you need maximum system

performance or low-noise/low power consumption with one-click.

 Silent: Low-noise and low power consumption mode

 Normal: Normal Mode

 Speed: Maximum performance mode. The system operates

in its maximum performance, and system resources are

allocated to the currently active program with priority for

maximum performance.

 For Windows XP model, Easy SpeedUp Manager function

is provided in Magic Keyboard program.

If you reinstall Windows XP, you have to install the Magic

Keyboard program additionally using the System Software

Media in order to use this function.

 If you don’t want fan noise turning ON and OFF in the

Silent mode, select the Advanced menu > Fan Silent

Mode > Low in the BIOS Setup. The fan keeps turning

ON and works in Low noise mode.

Wireless LAN Turns the wireless LAN function on or off in models with wireless

LAN capability.

Touchpad

Turns the Touchpad function on or off.

When using an external mouse only, you can turn the Touchpad

off.

Num Lock Turns the numeric keyboard on or off.

Scroll Lock If you turn the Scroll Lock on, you can scroll the screen up or

down without changing the cursor location in some applications.

Screen Brightness Control

To adjust the LCD brightness press the

Fn + key combination or the Fn +

key combination.

The changed screen brightness is

displayed at the center of the screen for a

moment.

Volume Control

To control the volume, press the Fn +

key combination or the Fn + key

combination.

You can mute the sound or cancel the

mute function by clicking the Fn +

key combination.

Numeric Key

The numbers are printed in blue on the

numeric keys.

If Num Lock is turned on by pressing the

Fn + key combination, you can use

the numeric keys to enter digits.

Other Function Keys

Application Key

Performs the right-click mouse function

(touchpad).

Touchpad

The touchpad provides the same function as a mouse and the left and right buttons of

the touchpad plays the role of the left and right buttons of a mouse.

 Use the Touchpad with your ngers. Using a sharp object may damage the

Touchpad.

 If you touch the Touchpad or press the Touchpad buttons while booting up, the

Windows boot time may be extended.

Moving the cursor on the screen

Place your nger on the touchpad slightly

and move your nger.

The mouse cursor will move accordingly.

Move your nger in the direction you wish

to move the cursor.

Touchpad

Use to move the cursor.

Scroll Area

Plays the role of the mouse

wheel. You can scroll up and

down using the Scroll Area.

Touchpad Left Button

You can select or run a

program using this button.

Touchpad Right Button

Plays the role of the right

mouse button.

Click Function

Place your nger on the touchpad and tap

your nger once over an item you want.

Alternatively, press the left touchpad

button once.

Tap

Click

Double-Click Function

Put your nger on the touchpad and

quickly tap twice with your nger on an

item you want.

Alternatively, press the left touchpad

button twice quickly.

or ClickClick

TapTap

Right Button Function

This corresponds to clicking the right

mouse button.

Press the right touchpad button once. The

corresponding pop-up menu appears.

Click

Drag Function

Dragging refers to moving an item to

another place after selecting it.

Press and hold down the left touchpad

button over an item you want to drag and

move the item to the new location.

Holding down

the left touchpad

button

Move

Touchpad Scroll Function

The touchpad scroll area provides the

mouse wheel function (scroll function).

Place your nger on the touchpad’s right

edge for vertical scrolling or the bottom

edge for horizontal scrolling and then

move your nger along the edge to scroll

the screen vertically or horizontally.

Touchpad On/Off Function

If you want to use the mouse only without

using the touchpad, you can turn the

touchpad off.

To lock the touchpad function, press the

Fn + keys.

External-type CD drive (To be purchased)

This computer supports an external USB CD-ROM drive (can be additionally

purchased).

Check if the interface type of the external CD-ROM drive is a USB type. For detailed

specications, refer to the catalog.

 Do not insert a cracked or scratched CD.

Otherwise, the CD may break and damage the optical disk drive when the CD

rotates at a high speed.

 When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.

 Do not eject a CD when the CD operating LED is on.

Connecting the CD Drive

Connect the CD drive to the USB port.

USB port

Inserting and Ejecting a CD

1 Press the Eject button of the CD

drive.

Status Indicator

Eject Button

Emergency Hole

2 When the CD tray opens, insert a CD

or DVD and push the tray in until it

clicks.

3 Push the CD tray inward until it clicks.

The CD drive status indicator is turned

on.

 A CD drive’s reading and writing

speed may differ depending on the

condition and type of the media.

 To eject a CD when the CD drive

does not work or the computer is

off, place the end of a paper clip

( ) into the Emergency Hole

until the CD tray is ejected.

Multi Card Slot (Optional)

Using the multi card slot, you can read and write data from and to an SD card, SDHC

card, MMC.

You can use a card as a removable disk and conveniently exchange data with digital

devices such as a digital camera, digital camcorder, MP3, etc.

 You have to additionally purchase a multi card with the necessary capacity

depending on your requirements.

 You can use a multi card just like any data storage device. A copyright protection

function is not supported.

 Since you can lose a card when moving the computer, keep the card separately.

 Before use, remove the dummy card that was inserted to protect the slot.

 Supported Cards: SD Card, SDHC Card, MMC

To Insert and Use a Memory Card

1 Insert a card into the slot according to the directions printed on the slot.

Example) SD Card

2 Click Start > My Computer. The

inserted memory card is displayed.

3 You can save, move and delete data

by double-clicking the corresponding

drive.

The device name of the card drive

may differ depending on your

computer model.

Since you can only use the card after

formatting it, if it is not formatted,

format the card referring to the

descriptions of “To format a memory

card”. 70

Using a Mini SD snd RS-MMC

Since the above cards are too small,

you cannot insert the cards into the

slot directly.

Insert the card into the dedicated

adapter (available from most

electronic retailers) and then insert

the adapter into the multi card slot.

However, depending on the adapter’s

body material, some RS-MMC cards

may not be recognized properly.

Samsung recommends checking the

card is recognized correctly prior to

purchasing.

To remove a memory card

Take hold of the end of the card and

remove the card.

To format a memory card

When using the memory card for the rst

time, you must format the card before

using it.

Formatting a card deletes all data

saved on the card. If the card

includes data, backup the data

before formatting it.

1 Click Start > My computer.

2 Right-click over a card drive with the

touchpad and select Format.

3 Click Start to the formatting.

 To use a card to exchange data

with a digital device such as a

digital camera, formatting the

data using the digital device is

recommended.

 When you try to use a card, which

is formatted in the computer, in

another digital device, you may

have to format the card again in

the device.

 You cannot format, write or delete

data from a SD, or SDHC card

with a write protection tab when it

is in the Lock position.

 Inserting and removing a memory

card repeatedly may damage the

memory card.

Connecting a monitor / TV

Using an external display device is useful when you are giving a presentation or

watching a video or movie through your monitor.

You have to buy a connection cable additionally.

Connecting to the Monitor / TV

Connecting to the Monitor port

Connect the computer to the RGB port of the monitor or TV using a monitor cable

(15-pin).

Switching the Display Device using

the Shortcut Key

Press the Fn + key combination

once. Then the Easy Display Manager

screen appears in which you can select a

display device.

Whenever you press the key while

holding down the Fn key, the selected

option is changed.

Example) Selecting LCD+CRT

Dual View

 LCD: Notebook Screen

 CRT: External Monitor Screen

 LCD+CRT Clone : Notebook+

External Monitor Screen

 LCD+CRT DualView: Notebook+

External Monitor Screen in Dual

View

 What is Dual View?

Dual View is a function that

enables you to view a computer

screen over two display devices.

It is convenient when you need a

wide screen.

External Monitor / TV is not

supported in the DOS Command

Prompt window.

Viewing Through a Monitor / TV

You can switch the display device using the shortcut key.

Using Dual View to View Extended Screen

Dual View is a function that enables you to view a computer screen over two display

devices. This is convenient when needing a wide screen for work.

In Dual View mode, you can select the screen resolution and color quality for each

display device, as if there were two separate graphics cards.

1 Connect the external display device

(e.g. a monitor or a projector) to the

corresponding port of the system. To

connect a TV, connect the TV to the

TV output port of the system.

2 Press touchpad right button on the

desktop, click Properties, and then

click the Settings tab.

3 Click the monitor 2 icon, select the

Extend my Windows desktop onto

this monitor check box, and then

click Apply.

4 When the conguration is complete,

click Identify on the left side of

Troubleshoot. The primary display

device(the LCD) is indicated as 1,

and the secondary display device is

indicated as 2. Now you can view the

screen through two monitors.

1 : Primary 2 : Secondary

 When you use Dual View,

conguring the LCD as the

'Primary' monitor is recommended.

 If the screen of the secondary

display device is displayed at

1024x768 pixels, with 32bit colors,

change the settings to the desired

screen resolution and color quality

in the [Display Properties] dialog

box.

Deactivating Dual View Mode

Click the monitor 2 icon, clear the

Extend my Windows desktop onto this

monitor check box, and then click Apply.

To move a window between

display devices in Dual View

mode

Click the title bar of the window in the

primary display device (1, the LCD),

and drag it to the secondary display

device (2). The window is moved to

the secondary display device.

Adjusting the Volume using the

Keyboard

Press the Fn + key combination or

Fn + key combination to adjust the

volume.

Press the Fn + key combination to

turn the volume on or off.

Adjusting the Volume using the

Volume Adjustment Program

Click the Volume icon on the taskbar

and slide the volume control bar to adjust

the volume.

Mute

For advanced volume control options,

double-click the Volume icon , and

adjust the volume level in the volume

control program.

When you turn the system on, a

booting noise may occur.

Adjusting the Volume

You can adjust the volume using the keyboard and the volume control program.

Using SRS

The SRS function enables you to

experience more stereophonic sound by

expanding the space-perception through

the stereo speaker.

This function is available for specic

models only.

1 Click Control Panel > Sound, Voice

and Audio Device > Sound and

Audio Devices.

2 Click the audio tab, select SRS

Premium Sound in Play > Default

Device (D):, and then click the OK

button at the bottom.

In this case, although you can change

the volume in the SRS Mixer, you can

also change the volume in the Master

Volume of the Realtek HD Audio

Output Mixer.

Therefore, when SRS is selected,

you can set the Master Volume of the

Realtek HD Audio Output Mixer to

the maximum value and then set the

actual volume using the SRS Mixer.

3 Click on Control Panel > Sound,

Voice and Audio Device > SRS

Control Panel.

Check the Enable checkbox and

select a mode. Then you can listen

to sound through the selected SRS

effect.

 WOW XT (Music): Select to listen

to music.

 TruSurround XT (Movie/Video):

Select to watch a movie.

 The SRS function is only

supported for a computer’s built-in

speakers or headphones.

 It is recommended unchecking the

SRS option before recording, and

checking it before playing sound.

This is to prevent sound distortion

due to the double application of

the SRS effect when a user plays

the recorded le by using stereo

mix.

Using Recorders

This section describes how to perform recording on a computer by using Windows

Recorder.

1 Connect a microphone to the

microphone jack.

2 Click Start > Control Panel >

Sounds, Speech, and Audio

Devices > Sounds and Audio

Devices.

3 Click Advanced from Volume and

then, click Options > Properties.

4 Select Realtek HD Audio input from

the mixer device to select Recording

from Adjust Volume for.

5 Select Mic Volume from Show the

following volume controls and click

OK.

6 When Recording Control window

appears, check the Select checkbox.

Increase the recording volume to

increase the recording sensitivity and

close the window.

7 Click Start > All Programs >

Accessories > Entertainment >

Sound Recorder.

8 Click the Record button to perform

recording.

The default recording duration of

Windows is 60 seconds. Download

a dedicated recording program from

the Internet to record audio data for a

long time.

Chapter 3.

Using the Network

Wired Network 79

Wireless Network 82

1 Connect a LAN cable to the

computer’s LAN port.

2 Click Start > Control Panel >

Network and Internet Connections

> Network Connection.

3 Select Local Area Connection and

click the right button of the touch pad

and select Properties.

The LAN Device name may differ

depending on your computer’s

Network Device.

Wired Network

A wired network is a network environment used for a company network or broadband

internet connection at home.

4 Click General tab and select a LAN

driver from Connect using:. Select

Internet Protocol(TCP/IP) and click

Properties.

The displayed LAN driver may vary

depending on the LAN device type.

Click Install to add a network

component as shown in the gure

below: You can add a client, a

service, or a protocol.

5 Congure IP settings.

Select Obtain an IP address

automatically when using DHCP. If

you use a static IP, select Use the

following IP address and enter the

values.

If the IP of your computer is not

automatically assigned, contact the

network administrator.

6 If all settings are made, click OK. Now

the network conguration is nished.

Samsung Electronics Co SWDY3100 Cell/PCS GSM/EDGE/WCDMA Mini PCI Transmitter Card User Manual Springfield N130 XP eng indb

Samsung Electronics Co Ltd Cell/PCS GSM/EDGE/WCDMA Mini PCI Transmitter Card Springfield N130 XP eng indb

Contents

User Manual 1

Navigation menu

Namespaces

Views

Navigation