Samsung Electronics Co SWDY3100 Cell/PCS GSM/EDGE/WCDMA Mini PCI Transmitter Card User Manual Springfield N130 XP eng indb

Download:
Mirror Download [FCC.gov]
Document ID	1185695
Application ID	UCaY1wZ5Ea3LjV2q7ejdfg==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	433.69kB (5421186 bits)
Date Submitted	2009-10-19 00:00:00
Date Available	2010-04-17 00:00:00
Creation Date	2009-09-02 16:32:34
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2009-09-02 16:33:02
Document Title	Springfield_N130_XP_eng.indb
Document Creator	Adobe InDesign CS2 (4.0.5)

SAMSUNG
User Guide
Chapter 1.
Getting Started
Product Features
Before You Start
Contents
Safety Precautions
Proper Posture During Computer Use
25
Important Safety Information
28
Replacement Parts and Accessories
31
Regulatory Compliance Statements
34
WEEE SYMBOL INFORMATION
49
Overview
51
Turning the Computer On and Off
57
Product Features
PC in Hand
 Improved portability through its compact size and
lightweight design
 Slim, Polished Design
Small but Powerful PC
 An Intel “Atom” Processor with Low Power
Consumption and Low Heat
 Extended Use Time through the use of PowerEfficient Parts
Versatile and Convenient Use
 A Camera Module for Video Chatting or
Conferencing (Optional)
 Wireless LAN and Bluetooth Function (Optional)
 Multi Card Slot Support (Optional)
 Easy-to-Use Keyboard
Optional items may be changed or may not be
provided depending on the computer model.
Before You Start
Before reading the User Guide, first check the following information.
User Guide Information
Utilizing the User Guide
This product is supplied with an
Installation Guide, and a User Guide.
It is now even easier to use your
computer by using either of the guides
depending on your needs.
z  Be sure to read the Safety
Precautions before using the
computer.
Installation Guide
This guide is provided so that you can
conveniently refer to this guide when
using the computer for the first time after
purchasing it.
This document includes the computer
components and the connection
procedures.
c  Refer to the User Guide for the
procedures to use the computer.
User Guide
You are currently reading the User Guide.
To open the file at any time, double-click
the icon on the Desktop. Alternatively,
select Start > All Programs > Samsung
> User Guide > User Guide.
This document includes the computer
functions, how to use the functions, and
how to use the programs.
n  If a problem occurs, refer to the Q & A
included in the User Guide.
x  Refer to the separately supplied
Installation Guide when installing
your computer.
v  Using the Index of the User Guide,
you can easily find any information
you are looking for.
b  Using the Glossary of the User
Guide, you can easily find meanings
for technical terms.
 Optional items, some devices and
software referred to in the User
Guide may not be provided and/or
changed by upgrade.
Note that the computer
environment referred to in the
User Guide may not be the same
as your own environment.
 Images used in this User Guide may differ from the actual product.
 This guide describes procedures for using both the mouse and the touchpad.
 The illustrations provided in this guide assume that your operating system is
Windows XP. These illustrations are subject to change.
 The User guide supplied with this computer may vary depending on your model.
Safety Precaution Notations
Icon
Notation
Description
Warning
Failing to follow instructions marked with this symbol, may
cause personal injury and or fatality.
Caution
Failing to follow instructions marked with this symbol, may
cause slight injury to yourself or damage your property.
Text Notations
Icon
Notation
Description
Before You Start
Content included in this section includes information required
before using a function.
Caution
Content included in this section includes information required
about the function.
Note
Content included in this section includes helpful information to
use the function.
XX
This notation represents the page number you can refer to for
information about related functions or as a reference.
Start > All Programs
> Samsung > User
Guide > User Guide
This represents a menu path to run a program.
Click the Start button and then select All Programs > Samsung
> User Guide > User Guide in this order from the menu.
Copyright
© 2009 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without the consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without notice due to improving
the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please take care to avoid
losing any important data and backup your data to prevent any such data loss.
Precautions for Operating System Support
If a problem occurs because of the reinstallation of other operating systems(OS) or a
previous version of a OS pre-installed on this computer, or a software that does not
support the OS, the company will not provide technical support, a replacement or
refund, and if our service engineer visits you due to this problem, a service charge will
be applied.
Performance Restrictions
z Online games and some games(3D,2D) may not be supported and Full HD video
and some high bit rate HD video playback may be slow and stutter on this computer.
x There is one memory slot provided on this computer. It supports 2GB memory
max. To upgrade to 2GB memory, replace the current memory with a 2GB memory
module.
About the Product Capacity Representation Standard
About HDD Capacity Representation
The capacity of the storage device (HDD, SSD) of the manufacturer is calculated
assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage device capacity
assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the
HDD in Windows is smaller than the actual capacity due to the difference in capacity
calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB,
80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB)
In addition, the capacity representation in Windows may be even smaller because some
programs such as Recovery Solution may reside in a hidden area of the HDD.
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual capacity of memory.
This is because BIOS or a video adapter uses a portion of memory or claims it for
further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as
1,022MB or less)
Recovery Solution Representation (Optional)
Q. What is a Recovery Area?
A. - Samsung computers have an additional partition to recover computers or save
backup files. (Only for models with the Samsung Recovery Solution.)
This partition is called a Recovery Area and it includes a recovery image that
comprises of the OS and application programs.
-Y
 ou can either double-click the Samsung Recovery Solution icon on the desktop
or press F4 while booting the computer to enter the Recovery Area. Then you
can back up the present computer state or recover the computer from backed up
images.
- For deleting the Recovery Area, you need to use an additional Recovery Area
Removal Tool. After deleting the recovery area, you can use the newly created
partition for other uses, such as for saving personal data. Be careful that once the
recovery area is deleted, the Samsung Recovery Solutions will not work anymore.
Q. T
 he capacity representation of the hard disk drive(HDD) in Windows is
different from the product specifications.
A. - The capacity of the storage device (HDD) of the manufacturer is calculated
assuming that 1KB=1,000 Bytes. However, the operating system (Windows)
calculates the storage device capacity assuming that 1KB=1,024 Bytes, and
therefore the capacity representation of the HDD in Windows is smaller than the
actual capacity. This is due to the difference in capacity calculation and does not
mean the installed HDD is different from the product specifications.
- The capacity representation in Windows may be smaller than the actual capacity
because some programs occupy a certain area of the HDD outside of Windows.
- For models with Samsung Recovery Solution, the HDD capacity representation
in Windows may be smaller than the actual capacity because Samsung Recovery
Solution uses a hidden area of about 5~20GB of the HDD to save the recovery
image, and that hidden area is not counted towards the total size available to
Windows. The size of Samsung Recovery Solution varies by models because of the
different size of applied programs.
Contents
Chapter 1. Getting Started
Product Features
Before You Start
Contents
Safety Precautions
Proper Posture During Computer Use
Important Safety Information
Replacement Parts and Accessories
Regulatory Compliance Statements
WEEE SYMBOL INFORMATION
Overview
Turning the Computer On and Off
Chapter 3. Using the Network
25
28
31
34
49
51
57
Wired Network
Wireless Network
60
63
Chapter 5. Appendix
Chapter 4. Settings and Upgrade
LCD Brightness Control
BIOS Setup
Setting a Boot Password
Changing the Boot Priority
Upgrading Memory
Battery
Using the Security Lock Port
Chapter 2. Using the Computer
Keyboard
Touchpad
External-type CD drive (To be
purchased)
Multi Card Slot (Optional)
Connecting a monitor / TV
Adjusting the Volume
79
82
Reinstalling Windows XP (Optional)
Reinstalling Software (Optional)
Using Samsung Recovery Solution
(Optional)
Questions and Answers
Product Specifications
Glossary
Index
66
68
71
75
89
90
94
97
98
100
106
108
113
115
124
145
147
151
Safety Precautions
For your security and to prevent damage, please read the following safety instructions
carefully. Since these are commonly applied to Samsung Computers, some figures may differ
from the actual product.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Installation Related
Do not install the product
in places exposed
to humidity such as
bathrooms.
There is a danger of
electric shock. Use the
product within the operating
conditions specified in the
Manufacturers User Guide.
Keep a distance of 15cm
or more between the
computer and the wall
and do not place any
objects between them.
Failing to do so may
cause an increase in the
internal temperature of
the computer and result in
injury.
Do not install the
computer on a slant or a
place prone to vibrations,
or avoid using the
computer in that location
for a long time.
Failing to do so may result
in an increased risk of
malfunctions or damage to
the product.
Keep the plastic bags out
of the reach of children.
There is a danger of
suffocation.
NB Ver 2.0
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Power Related
The power plug and
wall outlet figures may
differ depending on the
country specifications
and the product model.
Avoid exposing any part
of your body to the heat
from the computer vent
or AC adapter for a long
time when the computer
is on.
Exposing a part of your
body close to the heat from
the vent or AC adapter for
long periods of time may
cause a burn.
Avoid blocking the vent
at the bottom or side
of the computer when
using it on a bed or
cushion.
If the vent is blocked,
there is a danger of
damaging the computer or
overheating the inside of
the computer.
Do not touch the main
plug or power cord with
wet hands.
There is a danger of
electric shock.
Do not exceed the
standard capacity
(voltage/current) of a
multi-plug or power
outlet extension when
using it for the product.
This may result in electric
shock or fire.
10
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
If the power cord or
power outlet makes a
noise, disconnect the
power cord from the
wall outlet and contact a
service center.
This may result in electric
shock or fire.
Plug the power cord
firmly into the power
outlet and AC adapter.
Failing to do so may result
in electric shock or fire.
Do not use a damaged or
loose main plug or power
cord or power outlet.
This may result in electric
shock or fire.
Do not unplug the power
cord out by pulling the
cable only.
If the cord is damaged, it
may result in electric shock
or fire.
11
Do not bend the power
cord excessively or do
not place a heavy object
over the power cord. It is
especially important to
keep the power cord out
of reach of infants and
pets.
If the cord is damaged, it
may cause electric shock or
fire.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
AC Adapter Usage Precautions
If any foreign substance
such as water enters
the power input jack,
AC adapter or the
computer, disconnect
the power cord and
contact the service
center.
Damage to the device
within the computer may
result in electric shock or
fire hazard.
Do not place heavy
objects or step onto
the power cord or
AC adapter to avoid
damaging the power
cord or AC adapter.
If the cord is damaged,
there is a danger of electric
shock or fire.
Use only the AC adapter
supplied with the
product.
Using another adapter may
cause the screen to flicker.
12
Connect the power cord
to the AC adapter firmly.
Otherwise, there is a
danger of fire due to an
incomplete contact.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Battery Usage Related
Authorized
Parts
Keep the battery out of
the reach of infants and
pets, as they could put
the battery into their
mouths.
There is a danger of electric
shock or choking.
Use an authorized battery
and AC adapter only.
Please use an authorized
battery and adapter
approved by Samsung
Electronics.
Unauthorized batteries and
adapters may not meet the
proper safety requirements
and may cause problems or
malfunctions and result in
an explosion or fire.
13
Do not use the computer
in a badly ventilated
location such as on
bedding, on a pillow or
cushion, etc, and do
not use it in a location
such as room with floor
heating as it may cause
the computer to be
oveerheated.
Take care that the
computer vents (on the
side or the bottom) are not
blocked especially in these
environments. If the vents
are blocked, the computer
may overheat and it may
cause a computer problem,
or even an explosion.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Power Off
Do not use the computer
in a humid location such
as a bathroom or sauna.
Please use the computer
within the recommended
temperature and humidity
range (10~32ºC, 20~80%
RH).
Do not close the LCD
panel and put the
computer into your bag
to move it when it is still
turned on.
If you put the computer into
your bag without turning
it off, the computer may
overheat and there is a
danger of fire. Shut the
computer down properly
before moving it.
14
Never heat the battery
or put the battery into a
fire. Do not put or use the
battery in a hot location
such as a sauna, inside
a vehicle exposed to the
heat, and so on.
There is a danger of an
explosion or fire.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Take care not to allow
metal objects such as a
key or clip to touch the
battery terminal (metal
parts).
If a metal object touches
the battery terminals, it
may cause excessive
current flow and it may
damage the battery, or
result in a fire.
If liquid leaks out of
the battery or there is
a funny smell coming
from the battery, remove
the battery from the
computer and contact a
service center.
There is a danger of an
explosion or fire.
15
To use the computer
safely, replace a dead
battery with a new,
authorized battery.
 lease charge the
battery fully before
using the computer
for the first time.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Usage Related
Disconnect all cables
connected to the
computer before cleaning
it. If you are cleaning
a notebook computer,
remove the battery.
There is a danger of electric
shock or damage to the
product.
Do not place any
container filled with water
or chemicals over or near
the computer.
If water or chemicals enter
the computer, this may
cause fire or electric shock.
Do not connect a phone
line connected to a digital
phone to the modem.
There is a danger of a
electric shock, fire or
damage to the product.
If the computer is broken
or dropped, disconnect
the power cord and
contact a service center
for a safety check.
Using a damaged computer
may result in electric shock
or fire.
16
Avoid leaving the
computer exposed to
direct sunlight when the
computer is in a badly
ventilated location such
as inside a vehicle.
This may result in
overheating, fire or being
stolen.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Upgrade Related
Never disassemble the
power supply or AC
adapter.
There is a danger of electric
shock.
Use only authorized
parts (multi-plug, battery
and memory) and never
disassemble parts.
This may result in damage
to the product, electric
shock or fire.
When removing the RTC
(Real Time Clock) battery,
keep it out of the reach
of children as they could
touch and/or swallow it.
There is a danger of
choking. If a child has
swallowed it, contact a
doctor immediately.
17
Shut down the computer
and disconnect all cables
before disassembling
the computer. If there is
a modem, disconnect
the phone line. If you
are disassembling a
notebook computer,
make sure to remove the
battery.
Failing to do so, may cause
electric shock.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Custody and Movement Related
Follow the instructions
for the relevant location
(e.g. airplane, hospital,
etc.) when using a
wireless communication
device (wireless LAN,
Bluetooth, etc.).
When carrying the
notebook computer with
other items, such as the
adapter, mouse, books
etc, take care not to
press anything against
the notebook computer.
If a heavy object is
pressed against the
notebook computer, a
white spot or stain may
appear on the LCD.
Therefore, take care not to
apply any pressure to the
notebook.
In this case, place the
notebook computer in a
separate compartment
away from the other
objects.
18
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
Installation Related
Do not block the ports
(holes), vents, etc. of the
product and do not insert
objects.
Damage to a component
within the computer may
cause electric shock or fire.
Do not place a heavy
object over the product.
This may cause a problem
with the computer. In
addition, the object may
fall and cause injury, or
damage the computer.
When using the computer
with it lying on its side,
place it so that the vents
face upwards.
Failing to do so, may cause
the internal temperature of
the computer to rise and
the computer to malfunction
or halt.
Battery Usage
Related
Dispose of worn-out
batteries properly.
■ There is a danger of fire
or explosion.
■ The battery disposal
method may differ
depending on your
country and region.
Dispose of the
used battery in an
appropriate way.
Do not throw or
disassemble the battery
and do not put it into
water.
This may cause an injury,
fire or explosion.
19
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
Usage Related
Use only a battery
authorized by Samsung
Electronics.
Failing to do so may cause
an explosion.
Do not heat the battery
or expose it to heat (e.g.
inside a vehicle during
the summer).
There is a danger of
explosion or fire.
Do not place a candle,
light cigar, etc. over or
on the product.
There is a danger of fire.
Use a wall outlet or
multi-plug with a
grounding part.
Failing to do so may result
in electric shock.
Avoid contact with metal
objects such as car keys
or clips when keeping or
carrying a battery.
Contact with a metal may
cause excessive current
and a high temperature
and may damage the
battery or cause a fire.
Make sure to have the
product tested by a
safety service engineer
after repairing the
product.
Authorized Samsung
Repair Centers will carry
out safety checks after a
repair. Using a repaired
product without testing it
for safety may cause an
electric shock or fire.
Charge the battery
according to the
instructions in the
manual.
Failing to do so, may cause
an explosion or fire from
damage to the product.
20
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
In case of lightning,
immediately turn the
system off, disconnect
the power cord from the
wall outlet and phone line
from modem. Do not use
a modem or phone.
There is a danger of electric
shock or fire.
Do not use your computer
and AC-Adapter on your
lap or soft surfaces.
If the computer temperature
increases, there is a danger
of burning yourself.
Connect only permitted
devices to the connectors
or ports of the computer.
Failing to do so, may cause
electric shock and fire.
Close the LCD panel
only after checking if the
notebook computer is
turned off.
The temperature may
rise and it may cause
overheating and
deformation of the product.
Do not press the Eject
Button while the Floppy
Disk/CD-ROM drive is in
operation.
You might lose data and
the disk might be suddenly
ejected and could cause an
injury.
Take care not to drop the
product while using it.
This may cause personal
injury or loss of data.
21
Do not touch the antenna
with electricity facility
such as the power outlet.
There is a danger of electric
shock.
When handling
computer parts, follow
the instructions on the
manual supplied with the
parts.
Failing to do so, may cause
damage to the product.
If the computer emits
smoke, or there is a
burning smell, disconnect
the power plug from the
wall outlet and contact
a service center. If your
computer is a notebook
computer, make sure to
remove the battery.
There is a danger of fire.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
Upgrade Related
Do not use a damaged or
modified CD/Floppy Disk.
There is a danger of
damaging the product or
personal injury.
Do not insert your fingers
into the PC Card Slot.
There is a danger of injury
or electric shock.
Use recommended
computer cleansing
solution when cleaning
the product and only use
the computer when it is
completely dried.
Failing to do so may cause
electric shock or fire.
Emergency disk eject
method using paperclip
should not be used while
the disk is in motion.
Make sure to use the
emergency disk eject
method only when the
Optical Disk Drive is
stopped.
There is a danger of injury.
Do not place your face
close to the Optical Disk
Drive tray when it is
operating.
There is a danger of injury
due to an abrupt ejection.
Check CDs for cracks and
damage prior to use.
It may damage the disc and
cause disorder of device
and injury of user.
22
Take care when
touching the product or
parts.
The device may be
damaged or you may be
injured.
Take care not to throw
or drop a computer
part or device.
This may cause injury or
damage to the product.
Make sure to close the
computer cover before
connecting the power
after a reassembly.
There is a danger of
electric shock if your
body touches an internal
part.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
Custody and Movement Related
Use parts authorized
by Samsung
Electronics only.
Failing to do so, may
cause fire or damage the
product.
Never disassemble or
repair the product by
yourself.
There is a danger of
electric shock or fire.
To connect a
device that is not
manufactured
or authorized by
Samsung Electronics,
enquire at your
service center before
connecting the device.
There is a danger of
damaging the product.
When moving the
product, turn the power
off and separate all
connected cables first.
The product might be
damaged or users may trip
over the cables.
For long periods of not
using the notebook
computer, discharge the
battery and preserve as
it is detached.
The battery will be
preserved at its best
condition.
23
Do not operate or watch
the computer while
driving a vehicle.
There is a danger of a
traffic accident. Please
concentrate on driving.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the
product.
Cautions on Preventing Data Loss (Hard Disk Management)
Take care not to damage the data on a
hard disk drive.
Causes that may damage the data of a
hard disk drive and the hard disk drive
itself.
■ A hard disk drive is so sensitive to
external impact that an external impact
may cause loss of data on the surface
of the disk.
■ The data may be lost when an external
impact is applied to the disk while
disassembling or assembling the
computer.
■ Take extra care, because moving the
computer or an impact on the computer
when it is turned on may damage the
data of the hard disk drive.
■ The data may be lost when the
computer is turned off or reset by a
power failure while the hard disk drive is
operating.
■ The company is not liable for any loss
of any data caused by a customer’s
careless usage or bad environmental
conditions.
■ The data may be lost and irrecoverable
due to a computer virus infection.
■ The data may be lost if the power is
turned off while running a program.
■ Moving or causing an impact to the
computer while the hard disk drive
is operating, may cause files to be
corrupted or bad sectors on the hard
disk.
To prevent data loss due to damage to the hard disk drive, please backup your
data frequently.
24
Proper Posture During Computer Use
Maintaining a proper posture during computer use is very important to prevent physical
harm.
The following instructions are about maintaining a proper posture during computer use
developed through human engineering. Please read and follow them carefully when
using the computer.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations
may increase and serious physical harm may be caused.
The instructions in this manual have been prepared so that they can be applied within
the coverage of general users.
If the user is not included in the coverage, the recommendation is to be applied
according to the user’s needs.
Proper Posture
 Keep the center of your leg weight not
on the chair but on your feet when you
are sitting on a chair.
 To use the computer while talking over
the telephone, use a headset. Using
the computer with the phone on your
shoulder is bad for posture.
 Keep frequently used items within a
comfortable work range (where you
can reach them with your hands).
Adjust the heights of desks and chairs
appropriate to your height.
The heights are to be adjusted so that
your arm forms a right angle when you
place your hand over the keyboard while
sitting down on a chair.
Adjust the height of chair so that your heel
is comfortably placed on the floor.
 Do not use the computer while you
are lying down, but only while you are
sitting down.
 Do not use the computer on your lap.
If the computer temperature increases,
there is a danger of burning yourself.
 Work while keeping your back straight.
 Use a chair with a comfortable back.
25
Eye Position
Hand Position
Keep the monitor or LCD away from
your eyes by at least 50cm.
Keep your arm at a right angle as
shown by the figure.
50c
 Keep the line from your elbow to your
hand straight.
 Do not place your palm over the
keyboard while typing.
 Do not hold the mouse with excessive
force.
 Do not press the keyboard, touchpad or
mouse with excessive force.
 It is recommended connecting an
external keyboard and mouse when
using the computer for long periods of
time.
 Adjust the height of the monitor and
the LCD screen so that its top height is
equal to or lower than your eyes.
 Avoid setting the monitor and LCD
excessively bright.
 Keep the monitor and LCD screen
clean.
 If you wear glasses, clean them before
using the computer.
 When entering contents printed on a
paper into the computer, use a static
paper holder so that the height of the
paper is almost equal to that of the
monitor.
26
Volume Control
(Headphones and Speakers)
Use Time (Break Time)
 Take a break for 10 minutes or more
after a 50-minute period when working
for more than one hour.
Check your volume first to listen to
music.
Illumination
 Do not use the computer in dark
locations. The illumination level for
computer use must be as bright so for
reading a book.
 Indirect illumination is recommended.
Use a curtain to prevent reflection on
the LCD screen.
Check your
volume!!
 Check if the volume is too loud before
using headphones.
 It is not recommended using
headphones for long periods of time.
 Any deviation from the equalizer
default setting could cause hearing
impairment.
 The default setting can be changed
through software and driver updates
without your intervention. Please check
the equalizer default setting before first
usage.
Operation Condition
 Do not use the computer in hot and
humid locations.
 Use the computer within the allowed
temperature and humidity range
specified in the User Guide.
27
Important Safety Information
 Ensure that the electrical outlet you
are using to power your equipment is
easily accessible in case of fire or short
circuit.
 If your computer has a voltage selector
switch, make sure that the switch is in
the proper position for your area.
 Openings in the computer case are
provided for ventilation. Do not block
or cover these openings. Make sure
you provide adequate space, at least 6 
inches (15 cm), around the system for
ventilation when you set up your work
area. Never insert objects of any kind
into the computer ventilation openings.
 Ensure that the fan vents on the bottom
of the casing are clear at all times.
Do not place the computer on a soft
surface, doing so will block the bottom
vents.
 If you use an extension cord with this
system, make sure that the total power
rating on the products plugged into the
extension cord does not exceed the
extension cord power rating.
Safety Instructions
Your system is designed and tested
to meet the latest standards for safety
of information technology equipment.
However, to ensure safe use of this
product, it is important that the safety
instructions marked on the product and in
the documentation are followed.
Always follow these instructions to
help guard against personal injury
and damage to your system.
Setting Up your System
 Read and follow all instructions
marked on the product and in the
documentation before you operate your
system. Retain all safety and operating
instructions for future use.
 Do not use this product near water or a
heat source such as a radiator.
 Set up the system on a stable work
surface.
 The product should be operated only
with the type of power source indicated
on the rating label.
28
Care During Use
 Do not walk on the power cord or allow anything to rest on it.
 Do not spill anything on the system. The best way to avoid spills is to not eat or drink
near your system.
 Some products have a replaceable CMOS battery on the system board. There is a
danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery
with the same or equivalent type recommended by the manufacturer.
Dispose of batteries according to the manufacturers instructions. If the CMOS battery
requires replacement insure that a qualified technician performs the task.
 When the computer is turned off, a small amount of electrical current still flows
through the computer.
To avoid electrical shock, always unplug all power cables, remove the battery and
modem cables from the wall outlets before cleaning the system.
 Unplug the system from the wall outlet and refer servicing to qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
29
The Instruction On Safety Operation of NotePC
z  When installing and operating devices please refer to safety requirements in the
user guide.
x Devices can be used only with the equipment specified in the technical
specifications of the devices.
c If any smell of burning or smoke is detected from the computer the unit should
be switched off and battery removed. The unit should be checked by a qualified
technician before reuse.
v  Service and repair of devices should be carried out by authorized service centers.
b  Do not allow your portable computer to operate with the base resting directly on
exposed skin for extended periods of time. The surface temperature of the base
will rise during normal operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or eventually a burn.
30
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
Do not use this product in areas classified as hazardous. Such areas include patient
care areas of medical and dental facilities, oxygen rich environments, or industrial
areas.
Battery Disposal
Do not put rechargeable batteries or products powered by non-removable
rechargeable batteries in the garbage.
Contact the Samsung Helpline for information on how to dispose of batteries that you
cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
31
Laser Safety
All systems equipped with CD or DVD drives comply with the appropriate safety
standards, including IEC 60825-1. The laser devices in these components are classified
as “Class 1 Laser Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact
an authorized service location.
 Laser Safety Note:
Use of controls or adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure. To prevent
exposure to laser beams, do not try to open the enclosure of a CD or DVD drive.
 Class 1M laser radiation when operating part is open.
Do not view directly with optical instruments.
 Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
Connect and Disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Do not unplug the power cord out by pulling the cable only.
32
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug) you received with your
computer meets the requirements for use in the country where you purchased your
equipment.
Power cord sets for use in other countries must meet the requirements of the country
where you use the computer. For more information on power cord set requirements,
contact your authorized dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable to all countries:
 The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of
9.75 feet (3.0m).
 All power cord sets must be approved by an acceptable accredited agency
responsible for evaluation in the country where the power cord set will be used.
 The power cord set must have a minimum current capacity of 7 A and a nominal
voltage rating of 125 or 250 volts AC, as required by each country’s power system.
 The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC
320 Standard Sheet C7 connector, for mating with appliance inlet on the computer.
33
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your
notebook system. The following section is a general overview of considerations while
operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the
specific country sections (or country group sections). The wireless devices in your
system are only qualified for use in the countries identified by the Radio Approval Marks
on the system rating label. If the country you will be using the wireless device in, is not
listed, please contact your local Radio Approval agency for requirements. Wireless
devices are closely regulated and using them may not be allowed.
The RF field strength of the wireless device or devices that may be embedded in your
notebook are well below all international RF exposure limits as known at this time.
Because the wireless devices (which may be embedded into your notebook) emit less
energy than is allowed in radio frequency safety standards and recommendations,
manufacturer believes these devices are safe for use. Regardless of the power levels,
care should be taken to minimize human contact during normal operation.
Some circumstances require restrictions on wireless devices. Examples of common
restrictions are listed on the next page:
34
 Radio frequency wireless communication can interfere with equipment on
commercial aircraft. Current aviation regulations require wireless devices to be
turned off while traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wifi) and Bluetooth
communication devices are examples of devices that provide wireless
communication.
 In environments where the risk of interference to other devices or services is
harmful or perceived as harmful, the option to use a wireless device may be
restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden
atmospheres are limited examples where use of wireless devices may be restricted
or eliminated. When in environments where you are uncertain of the sanction to use
wireless devices, ask the applicable authority for authorization prior to use or turning
on the wireless device.
 Every country has different restrictions on the use of wireless devices. Since your
system is equipped with a wireless device, when traveling between countries with
your system, check with the local Radio Approval authorities prior to any move or
trip for any restrictions on the use of a wireless device in the destination country.
 If your system came equipped with an internal embedded wireless device, do not
operate the wireless device unless all covers and shields are in place and the
system is fully assembled.
 Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Please contact
manufacturer for service.
 Only use drivers approved for the country in which the device will be used. See the
manufacturer System Restoration Kit, or contact manufacturer Technical Support for
additional information.
35
United States of America
USA and Canada Safety
Requirements and Notices
Explosive Device Proximity
Warning
Do not operate a portable transmitter
(such as a wireless network device)
near unshielded blasting caps or in
an explosive environment unless
the device has been modified to be
qualified for such use.
Do not touch or move antenna while the
unit is transmitting or receiving.
Do not hold any component containing
the radio such that the antenna is very
close or touching any exposed parts of
the body, especially the face or eyes,
while transmitting.
Do not operate the radio or attempt
to transmit data unless the antenna
is connected; if not, the radio may be
damaged.
Use On Aircraft Caution
Regulations of the FCC and FAA
prohibit airborne operation of radiofrequency wireless devices because
their signals could interfere with
critical aircraft instruments.
Use in specific environments:
The use of wireless devices in hazardous
locations is limited by the constraints
posed by the safety directors of such
environments.
The use of wireless devices on airplanes
is governed by the Federal Aviation
Administration (FAA).
The use of wireless devices in hospitals
is restricted to the limits set forth by each
hospital.
Other Wireless Devices
Safety Notices for Other Devices in
the Wireless Network: Refer to the
documentation supplied with wireless
Ethernet adapters or other devices in the
wireless network.
The Part 15 radio device operates on
a non-interference basis with other
devices operating at this frequency.
Any changes or modification to said
product not expressly approved by
Intel could void the user’s authority to
operate this device.
36
Unintentional Emitter per FCC Part
15
 Reorient or relocate the receiving
antenna.
 Increase the separation between
the equipment and receiver.
 Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
 Consult the dealer or an
experienced radio/TV technician
for help.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:(1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
If necessary, the user should consult the
dealer or an experienced radio/television
technician for additional suggestions.
The user may find the following booklet
helpful: “Something About Interference.”
This is available at FCC local regional
offices. Our company is not responsible
for any radio or television interference
caused by unauthorized modifications
of this equipment or the substitution or
attachment of connecting cables and
equipment other than those specified
by our company. The correction will be
the responsibility of the user. Use only
shielded data cables with this system.
This equipment has been tested
and found to comply with the limits
for a Class B digital device pursuant
to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and if not
installed and used in accordance
with the instructions may cause
harmful interference which will not
occur in a correct installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
37
Intentional emitter per FCC Part 15
This transmitter must not be collocated
or operate in conjunction with any other
antenna or transmitter except the installed
Bluetooth transmitter.
Operation of this device is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation of the device.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices
(radio frequency (RF) wireless
communication devices), operating in
the 2.4GHz/5GHz Band, may be present
(embedded) in your notebook system.
This section is only applicable if these
devices are present. Refer to the system
label to verify the presence of wireless
devices.
Wireless devices that may be in your
system are only qualified for use in the
United States of America if an FCC ID
number is on the system label.
This device is restricted to indoor use
due to its operation in the 5.15 to 5.25 
GHz frequency range. FCC requires
this product to be used indoors for
the frequency range 5.15 to 5.25 GHz
to reduce the potential for harmful
interference to co-channel Mobile Satellite
systems. High power radars are allocated
as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and
/or damage this device.
The power output of the wireless device
(or devices), which may be embedded
in your notebook, is well below the RF
exposure limits as set by the FCC.
Wireless devices are not user
serviceable. Do not modify them in
any way.
Modification to a wireless device
will void the authorization to use it.
Contact manufacturer for service.
FCC Part 68
(If fitted with a modem device.)
This equipment compiles with part
of the FCC rules. On the back of this
equipment is a label that contains, among
other information, the FCC registration
number and ringer equivalence number
(REN) for this equipment. If requested,
this information must be provided to the
telephone company.
This equipment uses the following USOC
jacks : RJ11C
38
An FCC compliant telephone cord
and modular plug is provided with this
equipment. This equipment is designed
to be connected to the telephone network
or promises wiring using a compatible
modular jack which is Part 68 compliant.
See Installation Instructions for details.
The REN is used to determine the
quantity of devices which may be
connected to telephone line. Excessive
RENs on the telephone line may result in
the devices not ringing in response to an
incoming call. In most, but not all areas,
the sum of RENs should not exceed
five (5.0). To be certain of the number of
devices that may be connected to a line,
as determined by total RENs, contact the
local telephone company to determine the
maximum REN for the calling area.
If the terminal equipment causes harm
to the telephone network, the Telephone
Company will notify you in advance that
temporary discontinuance of service may
be required. But if advance notice is not
practical, the telephone company will
notify the customer as soon as possible.
Also, you will be advised of your right
to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations, or procedures that could
affect the operation of the equipment. If
this happens, the telephone company
will provide advanced notice in order for
you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with this
equipment (Modem) for repair or warranty
information, please contact your local
distributor. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until the
problem is resolved.
The user must use the accessories and
cables supplied by the manufacturer
to get optimum performance from the
product.
No repairs may be done by the customer.
This equipment cannot be used on public
coin phone service provided by the
telephone company. Connection to party
line service is subject to state tariffs.
39
Canada
The Telephone Consumer Protection Act
of 1991 makes it unlawful for any person
to use a computer or other electronic
device, including fax machines, to send
any message unless such message
clearly contains in a margin at the top or
bottom of each transmitted page or on
the first page of the transmission, the date
and time it is sent and an identification
of the business or other entity, or other
individual sending the message and
the telephone number of the sending
machine or such business, other entity,
or individual. (The telephone number
provided may not be any number for
which charges exceed local or longdistance transmission charges.)
In order to program this information
into your fax machine, refer to your
communications software user manual.
Unintentional Emitter per ICES-003
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the radio interference regulations of
Industry Canada.
Le présent appareil numérique n’émet
pas de bruits radioélectriques dépassant
les limitesapplicables aux appareils
numériques de Classe B prescrites
dans le règlement sur le brouillage
radioélectrique édicté par Industrie
Canada.
40
Intentional Emitter per RSS 210
The power output of the wireless device
(or devices), which may be embedded
in your notebook, is well below the
RF exposure limits as set by Industry
Canada.
This transmitter must not be collocated
or operate in conjunction with any other
antenna or transmitter except the installed
Bluetooth transmitter.
Operation of this device is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation of the device.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices
(radio frequency (RF) wireless
communication devices), operating in
the 2.4GHz/5GHz Band, may be present
(embedded) in your notebook system.
This section is only applicable if these
devices are present. Refer to the system
label to verify the presence of wireless
devices.
Wireless devices that may be in your
system are only qualified for use in
Canada if an Industry Canada ID number
is on the system label.
When using IEEE 802.11a wireless LAN,
this product is restricted to indoor use
due to its operation in the 5.15- to 5.25GHz frequency range. Industry Canada
requires this product to be used indoors
for the frequency range of 5.15 GHz to
5.25 GHz to reduce the potential for
harmful interference to co-channel mobile
satellite systems. High power radar is
allocated as the primary user of the
5.25- to 5.35-GHz and 5.65 to 5.85-GHz
bands. These radar stations can cause
interference with and/or damage to this
device.
The maximum allowed antenna gain for
use with this device is 6dBi in order to
comply with the E.I.R.P limit for the 5.25to 5.35 and 5.725 to 5.85 GHz frequency
range in point-to-point operation.
To prevent radio interference to
licensed service, this device is
intended to be operated indoors
and away from windows to provide
maximum shielding. Equipment (or
its transmit antenna) that is installed
outdoors is subject to licensing.
Wireless devices are not user
serviceable. Do not modify them in
any way. Modification to a wireless
device will void the authorization
to use it. Contact manufacturer for
service.
41
Telecommunications per DOC
notice (for products fitted with an
IC-compliant modem)
Users should make sure, for their own
protection, that the electrical ground
connections of the power utility, telephone
lines, and internal metallic water pipe
system, if present, are connected
together. This precaution may be
particularly important in rural areas.
The Industry Canada label identifies
certified equipment. This certification
means that the equipment meets certain
telecommunications network protective,
operation, and safety requirements.
The Department does not guarantee
the equipment will operate to the users’
satisfaction.
Before installing this equipment, users
should make sure that it is permissible
to be connected to the facilities of the
local telecommunications company. The
equipment must also be installed using
an acceptable method of connection. In
some cases, the inside wiring associated
with a single-line individual service may
be extended by means of a certified
connector assembly. The customer
should be aware that compliance with
the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by
the supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause
to request the user to disconnect the
equipment.
To avoid electrical shock or
equipment malfunction do not
attempt to make electrical ground
connections by yourself. Contact the
appropriate inspection authority or an
electrician, as appropriate.
The Ringer Equivalence Number (REN)
assigned to each terminal device provides
an indication of the maximum number
of terminals allowed to be connected to
a telephone interface. The termination
on an interface may consist of any
combination of devices subject only to the
requirement that the sum of the Ringer
Equivalence Numbers of all the devices
does not exceed 5.
42
European Union
European Union CE Marking and
Compliance Notices
Manufacturer Information
Samsung Electronics Co., Ltd.
416, Maetan-3Dong, Yeongtong-Gu,
Suwon-City, Gyeonggi-Do, 443-742,
Korea
Products intended for sale within the
European Union are marked with the
Conformité Européene (CE) Marking,
which indicates compliance with the
applicable Directives and European
standards and amendments identified
below. This equipment also carries the
Class 2 identifier.
The following information is only
applicable to systems labeled with the CE
mark
Samsung Electronics Suzhou Computer
CO., LTD
No. 198, Fangzhou Road, Suzhou
Industrial Park, Jiangsu Province, 215021,
China
Tel:+86-512-6253-8988
For the web or the phone number of
Samsung Service Centre, see the
Warranty or contact the retailer where you
purchased your product.
European Directives
This Information Technology Equipment
has been tested and found to comply with
the following European directives:
 EMC Directive 2004/108/EC
 Low Voltage Directive 2006/95/EC
 R&TTE Directive 1999/5/EC
43
European Radio Approval
Information (for products fitted with
EU-approved radio devices)
This Product is a Notebook computer;
low power, Radio LAN type devices (radio
frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz
band, may be present (embedded) in your
notebook system which is intended for
home or office use. This section is only
applicable if these devices are present.
Refer to the system label to verify the
presence of wireless devices.
Wireless devices that may be in your
system are only qualified for use in the
European Union or associated areas
if a CE mark
with a Notified Body
Registration Number and the Alert
Symbol is on the system label.
The power output of the wireless device
or devices that may be embedded in you
notebook is well below the RF exposure
limits as set by the European Commission
through the R&TTE directive.
The low band 5.15 - 5.35 GHz is for
indoor use only.
See 802.11b and 802.11g restrictions
for specific countries or regions
within countries under the heading
“European Economic Area
Restrictions” below.
44
EU R&TTE Compliance Statements
Česky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English
Español
[Spanish]
Ελληνική
[Greek]
Français
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvių
[Lithuanian]
Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice
1//ES.
Undertegnede Samsung erklærer herved, at følgende udstyr Notebook
PC overholder de væsentlige krav og øvrige relevante krav i direktiv
1//EF.
Hiermit erklärt Samsung, dass sich das Gerät Notebook PC in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab Samsung seadme Notebook PC vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
Hereby, Samsung, declares that this Notebook PC is in compliance with
the essential requirements and other relevant provisions of Directive
1//EC.
Por medio de la presente Samsung declara que el Notebook PC
cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1//CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Samsung déclare que l’appareil Notebook PC est
conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1//CE.
Con la presente Samsung dichiara che questo Notebook PC è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1//CE.
Ar šo Samsung deklarē, ka Notebook PC atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Šiuo Samsung deklaruoja, kad šis Notebook PC atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Hierbij verklaart Samsung dat het toestel Notebook PC in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1//EG.
Hawnhekk, Samsung, jiddikjara li dan Notebook PC jikkonforma malMalti
ħtiāijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid[Maltese]
Dirrettiva 1//EC.
Alulírott, Samsung nyilatkozom, hogy a Notebook PC megfelel a
Magyar
vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
[Hungarian]
elõírásainak.
Niniejszym Samsung oświadcza, Ŝe Notebook PC jest zgodny
Polski
z zasadniczymi wymogami oraz pozostałymi stosownymi
[Polish]
postanowieniami Dyrektywy 1999/5/EC.
Português
Samsung declara que este Notebook PC está conforme com os
[Portuguese] requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami
[Slovenian]
in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
Samsung týmto vyhlasuje, že Notebook PC spĺňa základné požiadavky
[Slovak]
a všetky príslušné ustanovenia Smernice 1999/5/ES.
Samsung vakuuttaa täten että Notebook PC tyyppinen laite on
Suomi
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
[Finnish]
muiden ehtojen mukainen.
Härmed intygar Samsung att denna Notebook PC står I
Svenska
överensstämmelse med de väsentliga egenskapskrav och övriga
[Swedish]
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska
Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við
[Icelandic]
grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk
Samsung erklærer herved at utstyret Notebook PC er i samsvar med de
[Norwegian] grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Türkiye
Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin
[Türkçe]
temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
Nederlands
[Dutch]
To view the EU Declaration of Conformity for this product (in English only), go to: http://
www.samsung.com/uk/support/download/supportDownMain.do then search the model
number of the product. If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor.

European Economic Area Restrictions
Local Restriction of 802.11b/802.11g
Radio Usage
[Note to integrator: The following
statements on local restrictions must be
published in all end-user documentation
provided with the system or product
incorporating the wireless product.]
The European variant is intended for
use throughout the European Economic
Area. However, authorization for use is
further restricted in particular countries or
regions within countries, as follows:
General
European standards dictate maximum
radiated transmit power of 100 mW
effective isotropic radiated power (EIRP)
and the frequency range 2400 – 2483.5 
MHz.
The low band 5.15 - 5.35 GHz is for
indoor use only.
Due to the fact that the frequencies
used by 802.11b/802.11g wireless
LAN devices may not yet be
harmonized in all countries,
802.11b/802.11g products are
designed for use only in specific
countries or regions, and are not
allowed to be operated in countries
or regions other than those of
designated use.
As a user of these products, you
are responsible for ensuring that
the products are used only in the
countries or regions for which they
were intended and for verifying
that they are configured with the
correct selection of frequency and
channel for the country or region of
use. Any deviation from permissible
settings and restrictions in the
country or region of use could be an
infringement of local law and may be
punished as such.
Belgium
The product may be used outdoors, but
for outdoor transmissions over a distance
of 300m or more, a license from the BIPT
is required.
This restriction should be indicated in the
manual as follows:
Dans le cas d’une utilisation privée, à
l’extérieur d’un bâtiment, au-dessus d’un
espace public, aucun enregistrement n’est
nécessaire pour une distance de moins
de 300m. Pour une distance supérieure
à 300m un enregistrement auprès de
l’IBPT est requise. Pour une utilisation
publique à l’extérieur de bâtiments, une
licence de l’IBPT est requise. Pour les
enregistrements et licences, veuillez
contacter l’IBPT.
47
France
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.454 GHz (channels 1 to 7) for
outdoor use.
supporting voice telephony services) in
which network addressing, if provided, is
by means of Dual Tone Multi-Frequency
(DTMF) signaling.
Although this equipment can use
either loop disconnect (pulse) or
DTMF (tone) signaling, only the
performance of the DTMF signaling
is subject to regulatory requirements
for correct operation.
It is therefore strongly recommended
that the equipment is set to use
DTMF signaling for access to public
or private emergency services.
DTMF signaling also provides faster
call setup.
For Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and
outdoor use.
For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use.
2.420 - 2.4835 GHz for outdoor use
(channels 5 to 13)
The low band 5.15 - 5.35 GHz is for
indoor use only.
This equipment has been approved to
Council Decision 98/482/EEC - “CTR
21” for Pan-European single terminal
connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between
the individual PSTNs provided in
different countries, the approval does
not, of itself, give an unconditional
assurance of successful operation on
every PSTN termination point. In the
event of problems, you should contact
manufacturer Technical Support.
European Telecommunication
Information (for products fitted with
EU-approved modems)
Marking by the symbol
indicates
compliance of this equipment to the
Radio and Telecom Terminal Equipment
Directive 1999/5/EC. Such marking is
indicative that this equipment meets or
exceeds the following technical standards:
CTR 21 - Attachment requirements for
pan-European approval for connection to
the analogue Public Switched Telephone
Networks (PSTNs) of TE (excluding TE
48
WEEE SYMBOL INFORMATION
 orrect disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems.)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
49
Correct disposal of batteries in this product
Pb
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries
from other types of waste and recycle them through your local, free battery return
system.
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin
cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”
Contains Mercury, Dispose According to Local, State or Federal Laws.
For details see lamprecycle.org, eise.org, or call 1-800-Samsung.
50
Overview
Front View
 Optional items may be changed or
may not be provided depending on
the computer model.
 The actual color and appearance
of the computer may differ from the
pictures used in this guide.
(Model A)
(Model B)
1 Camera Lens (Optional) Using this lens, you can take still pictures and record video.
2 Keyboard
A device to enter data by pressing the keys.  60
3 Touchpad/Touchpad
The touchpad and touchpad buttons provide functions
Buttons
4 Power Switch
5 Multi Card Slot
(Optional)
similar to the mouse ball and buttons.  63
Turns the computer on or off.  57
A card slot that supports SD Card, SDHC and MMC.  68
6 Status Indicators
Shows the operating status of the computer.
The corresponding operating LED is lit when the
corresponding function operates.  52
7 Microphone (Optional)
8 LCD
You can use the built-in microphone.
The screen images are displayed here.
51
Status Indicators
(Model A)
1 Caps Lock
(Model B)
This turns on when the Caps Lock key is pressed allowing capital
letters to be typed without holding the Shift button down.
2 Hard Disk Drive Indicates that the hard disk drive is running.
This turns on when the wireless LAN is operating.
3 Wireless LAN
4 Charge Status This shows the power source and the battery charge status.
Green:  When the battery is fully charged or the battery is not
installed.
Amber: When the battery is being charged.
Off:
 When the computer is running on battery power without
being connected to AC adapter.
5 Power
This shows the computer operating status.
On:       When the computer is operating.
Blinks: When the computer is in Sleep mode.
52
Right View
(Model A)
(Model B)
1 USB Port
You can connect USB devices to the USB port such as a
keyboard/mouse, digital camera, etc.
2 Security Lock Port
You can connect a Kensington lock to the Security Lock Port
to prevent the computer from being stolen.
3 DC Jack
A jack to connect the AC adapter that supplies power to the
computer.
53
Left View
5 6
(Model A)
1 Wired LAN Port
2 Monitor Port
3 Fan Vents
4 5 6
(Model B)
Connect the Ethernet cable to this port.
79
A port used to connect a monitor, TV or projector supporting a
15pin D-SUB interface. 71
The internal heat of the computer is emitted through these
holes.
If the vents are blocked the computer may overheat.
Avoid blocking the vents as this may be dangerous.
4 Chargeable USB
Port (Optional)
You can connect USB devices to the USB port such as a
keyboard/mouse, digital camera, etc.
(Chargeable USB: You can charge USB devices through the
USB port even when the computer is turned off.)
 Charging a device through a Chargeable USB takes
longer than using a regular charger.
 Press the F2 key when the Samsung logo appears in
the booting sequence to enter the BIOS Setup, select
Advanced > USB Charge In Sleep Mode, and set
it to Enable. Then you can use the Chargeable USB
Port feature even in sleep mode.
5 Microphone Jack
6 Headphone Jack
A jack used to connect the microphone.
A jack used to connect the headphones.
54
Back View
(Model A)
1 Battery
(Model B)
This is a Lithium-Ion rechargeable battery that supplies power to
the computer. 100
55
Bottom View
(Model A)
(Model B)
1 Battery Latches
The latch used to remove or install the battery.
101
2 Memory Compartment
The main memory is installed inside the cover.
98
3 Speaker
A device used to generate sound.
Cover
The speaker specifications of the computer may
differ depending on the model.
56
Turning the Computer On and Off
Turning the computer on
Install the battery and connect the
1 AC
adapter.
 When running the computer on
battery power, the LCD brightness
is dimmed automatically to save
battery power.
key to increase
Press the Fn +
the LCD brightness.  62
 When turning the computer on
for the first time, the Register
Windows screen appears. You can
use the computer after registering
your user information.
 For detailed procedures on using
the operating system, refer to
the help section of the operating
system.
(Refer to the Installation Guide.)
2 Lift the LCD panel up.
Slide the Power Switch to turn the
3 computer
on.  
57
Turning the computer off
button on the taskbar.
1 Click the Start
2 Click Turn Off Computer.
3 Click Turn Off.
 If the computer has not turned off properly due to a system error, press
++. When [Windows Task Manager] dialog box appears, click
Shut Down > Turn Off to turn off the computer. Your unsaved work may be lost/
damaged.
 If the computer does not shutdown due to a system error, slide and hold the Power
Switch for 4 seconds or more to shut the computer down by force. Your unsaved
work may be lost/damaged. The next time you turn on your computer, a hard disk
check will be performed, before Windows starts.
58
Chapter 2.
Using the computer
Keyboard
60
Touchpad
63
External-type CD drive (To be purchased)
66
Multi Card Slot (Optional)
68
Connecting a monitor / TV
71
Adjusting the Volume
75
Keyboard
Shortcut key functions and procedures are discussed in the following sections.
 The keyboard is supplied according to the corresponding country.
 The keyboard may differ depending on your country. The following mainly describes
the shortcut keys.
Shortcut Keys
You can use the following functions by pressing the keys below with the Fn key.
Fn+
Name
Function
REST
Switches to Sleep mode. To wake the computer up, press the
(Sleep Mode) Power button.
Shows the remaining battery charge.
Gauge
You can only use this function when the Easy Display Manager
program is installed.
Enters the Euro monetary unit symbol.
Euro
This key may not be provided depending on the keyboard type.
Switches the screen output to the LCD or external monitor when
CRT/LCD
an external monitor (or TV) is connected to the computer. 72
Backlight
Mute
Turns the LCD backlight on or off.
Mutes or cancels mute.
Samsung
System diagnosis, recovery and Internet consultation program,
Magic Doctor Samsung Magic Doctor, will be launched. (Optional)
60
Fn+
Name
Easy
SpeedUp
Manager
Function
You can select operation mode when you need maximum system
performance or low-noise/low power consumption with one-click.
  Silent: Low-noise and low power consumption mode
  Normal: Normal Mode
  Speed: Maximum performance mode. The system operates
in its maximum performance, and system resources are
allocated to the currently active program with priority for
maximum performance.
 For Windows XP model, Easy SpeedUp Manager function
is provided in Magic Keyboard program.
If you reinstall Windows XP, you have to install the Magic
Keyboard program additionally using the System Software
Media in order to use this function.
 If you don’t want fan noise turning ON and OFF in the
Silent mode, select the Advanced menu > Fan Silent
Mode > Low in the BIOS Setup. The fan keeps turning
ON and works in Low noise mode.
Wireless LAN
Touchpad
Turns the wireless LAN function on or off in models with wireless
LAN capability.
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad
off.
Num Lock
Turns the numeric keyboard on or off.
Scroll Lock
If you turn the Scroll Lock on, you can scroll the screen up or
down without changing the cursor location in some applications.
61
Screen Brightness Control
Numeric Key
To adjust the LCD brightness press the
Fn +
key combination or the Fn +
key combination.
The numbers are printed in blue on the
numeric keys.
If Num Lock is turned on by pressing the
Fn +
key combination, you can use
the numeric keys to enter digits.
The changed screen brightness is
displayed at the center of the screen for a
moment.
Other Function Keys
Volume Control
Application Key
To control the volume, press the Fn +
key combination or the Fn +
key
combination.
Performs the right-click mouse function
(touchpad).
You can mute the sound or cancel the
mute function by clicking the Fn +
key combination.
62
Touchpad
The touchpad provides the same function as a mouse and the left and right buttons of
the touchpad plays the role of the left and right buttons of a mouse.
 Use the Touchpad with your fingers. Using a sharp object may damage the
Touchpad.
 If you touch the Touchpad or press the Touchpad buttons while booting up, the
Windows boot time may be extended.
Scroll Area
Plays the role of the mouse
wheel. You can scroll up and
down using the Scroll Area.
Touchpad
Use to move the cursor.
Touchpad Right Button
Plays the role of the right
mouse button.
Touchpad Left Button
You can select or run a
program using this button.
Moving the cursor on the screen
Place your finger on the touchpad slightly
and move your finger.
The mouse cursor will move accordingly.
Move your finger in the direction you wish
to move the cursor.
63
Click Function
Right Button Function
Place your finger on the touchpad and tap
your finger once over an item you want.
Alternatively, press the left touchpad
button once.
This corresponds to clicking the right
mouse button.
Press the right touchpad button once. The
corresponding pop-up menu appears.
Tap
or
Click
Click
Double-Click Function
Drag Function
Put your finger on the touchpad and
quickly tap twice with your finger on an
item you want.
Alternatively, press the left touchpad
button twice quickly.
TapTap
or
Dragging refers to moving an item to
another place after selecting it.
Press and hold down the left touchpad
button over an item you want to drag and
move the item to the new location.
Holding down
the left touchpad
button
ClickClick
64
Move
Touchpad Scroll Function
Touchpad On/Off Function
The touchpad scroll area provides the
mouse wheel function (scroll function).
Place your finger on the touchpad’s right
edge for vertical scrolling or the bottom
edge for horizontal scrolling and then
move your finger along the edge to scroll
the screen vertically or horizontally.
If you want to use the mouse only without
using the touchpad, you can turn the
touchpad off.
To lock the touchpad function, press the
Fn +
keys.
65
External-type CD drive (To be purchased)
This computer supports an external USB CD-ROM drive (can be additionally
purchased).
Check if the interface type of the external CD-ROM drive is a USB type. For detailed
specifications, refer to the catalog.
 Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk drive when the CD
rotates at a high speed.
 When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.
 Do not eject a CD when the CD operating LED is on.
Connecting the CD Drive
Connect the CD drive to the USB port.
USB port
66
Inserting and Ejecting a CD
 A CD drive’s reading and writing
speed may differ depending on the
condition and type of the media.
 To eject a CD when the CD drive
does not work or the computer is
off, place the end of a paper clip
) into the Emergency Hole
until the CD tray is ejected.
Press the Eject button of the CD
1 drive.
Status Indicator Emergency Hole
Eject Button
the CD tray opens, insert a CD
2 When
or DVD and push the tray in until it
clicks.
the CD tray inward until it clicks.
3 Push
The CD drive status indicator is turned
on.
67
Multi Card Slot (Optional)
Using the multi card slot, you can read and write data from and to an SD card, SDHC
card, MMC.
You can use a card as a removable disk and conveniently exchange data with digital
devices such as a digital camera, digital camcorder, MP3, etc.
 You have to additionally purchase a multi card with the necessary capacity
depending on your requirements.
 You can use a multi card just like any data storage device. A copyright protection
function is not supported.
 Since you can lose a card when moving the computer, keep the card separately.
 Before use, remove the dummy card that was inserted to protect the slot.
 Supported Cards: SD Card, SDHC Card, MMC
To Insert and Use a Memory Card
1 Insert a card into the slot according to the directions printed on the slot.
Example) SD Card
68
Click Start > My Computer. The
2 inserted
memory card is displayed.
The device name of the card drive
may differ depending on your
computer model.
Since you can only use the card after
formatting it, if it is not formatted,
format the card referring to the
descriptions of “To format a memory
card”. 70
Using a Mini SD snd RS-MMC
Since the above cards are too small,
you cannot insert the cards into the
slot directly.
Insert the card into the dedicated
adapter (available from most
electronic retailers) and then insert
the adapter into the multi card slot.
However, depending on the adapter’s
body material, some RS-MMC cards
may not be recognized properly.
Samsung recommends checking the
card is recognized correctly prior to
purchasing.
can save, move and delete data
3 byYoudouble-clicking
the corresponding
drive.
69
To remove a memory card
 To use a card to exchange data
with a digital device such as a
digital camera, formatting the
data using the digital device is
recommended.
 When you try to use a card, which
is formatted in the computer, in
another digital device, you may
have to format the card again in
the device.
 You cannot format, write or delete
data from a SD, or SDHC card
with a write protection tab when it
is in the Lock position.
 Inserting and removing a memory
card repeatedly may damage the
memory card.
Take hold of the end of the card and
remove the card.
To format a memory card
When using the memory card for the first
time, you must format the card before
using it.
Formatting a card deletes all data
saved on the card. If the card
includes data, backup the data
before formatting it.
1 Click Start > My computer.
over a card drive with the
2 Right-click
touchpad and select Format.
3 Click Start to the formatting.
70
Connecting a monitor / TV
Using an external display device is useful when you are giving a presentation or
watching a video or movie through your monitor.
You have to buy a connection cable additionally.
Connecting to the Monitor / TV
Connecting to the Monitor port
Connect the computer to the RGB port of the monitor or TV using a monitor cable
(15-pin).
71
Viewing Through a Monitor / TV
You can switch the display device using the shortcut key.
Switching the Display Device using
the Shortcut Key
 LCD: Notebook Screen
 CRT: External Monitor Screen
 LCD+CRT Clone : Notebook+
External Monitor Screen
 LCD+CRT DualView: Notebook+
External Monitor Screen in Dual
View
Press the Fn +
key combination
once. Then the Easy Display Manager
screen appears in which you can select a
display device.
Whenever you press the
key while
holding down the Fn key, the selected
option is changed.
 What is Dual View?
Dual View is a function that
enables you to view a computer
screen over two display devices.
It is convenient when you need a
wide screen.
External Monitor / TV is not
supported in the DOS Command
Prompt window.
Example) Selecting LCD+CRT
Dual View
72
Using Dual View to View Extended Screen
Dual View is a function that enables you to view a computer screen over two display
devices. This is convenient when needing a wide screen for work.
In Dual View mode, you can select the screen resolution and color quality for each
display device, as if there were two separate graphics cards.
the external display device
1 Connect
(e.g. a monitor or a projector) to the
Click the monitor 2 icon, select the
3 Extend
my Windows desktop onto
this monitor check box, and then
click Apply.
corresponding port of the system. To
connect a TV, connect the TV to the
TV output port of the system.
Press touchpad right button on the
2 desktop,
click Properties, and then
click the Settings tab.
73
When the configuration is complete,
4 click
Identify on the left side of
Deactivating Dual View Mode
Click the monitor 2 icon, clear the
Extend my Windows desktop onto this
monitor check box, and then click Apply.
Troubleshoot. The primary display
device(the LCD) is indicated as 1,
and the secondary display device is
indicated as 2. Now you can view the
screen through two monitors.
1 : Primary
To move a window between
display devices in Dual View
mode
Click the title bar of the window in the
primary display device (1, the LCD),
and drag it to the secondary display
device (2). The window is moved to
the secondary display device.
2 : Secondary
 When you use Dual View,
configuring the LCD as the
'Primary' monitor is recommended.
 If the screen of the secondary
display device is displayed at
1024x768 pixels, with 32bit colors,
change the settings to the desired
screen resolution and color quality
in the [Display Properties] dialog
box.
74
Adjusting the Volume
You can adjust the volume using the keyboard and the volume control program.
Adjusting the Volume using the
Keyboard
For advanced volume control options,
double-click the Volume icon , and
adjust the volume level in the volume
control program.
Press the Fn +
key combination or
Fn +
key combination to adjust the
volume.
Press the Fn +
key combination to
turn the volume on or off.
Adjusting the Volume using the
Volume Adjustment Program
Click the Volume icon
on the taskbar
and slide the volume control bar to adjust
the volume.
When you turn the system on, a
booting noise may occur.
Mute
75
Using SRS
Check the Enable checkbox and
select a mode. Then you can listen
to sound through the selected SRS
effect.
The SRS function enables you to
experience more stereophonic sound by
expanding the space-perception through
the stereo speaker.
This function is available for specific
models only.
Click Control Panel > Sound, Voice
1 and
Audio Device > Sound and
Audio Devices.
Click the audio tab, select SRS
2 Premium
Sound in Play > Default
Device (D):, and then click the OK
button at the bottom.
In this case, although you can change
the volume in the SRS Mixer, you can
also change the volume in the Master
Volume of the Realtek HD Audio
Output Mixer.
Therefore, when SRS is selected,
you can set the Master Volume of the
Realtek HD Audio Output Mixer to
the maximum value and then set the
actual volume using the SRS Mixer.
W
 OW XT (Music): Select to listen
to music.
T
 ruSurround XT (Movie/Video):
Select to watch a movie.
 The SRS function is only
supported for a computer’s built-in
speakers or headphones.
 It is recommended unchecking the
SRS option before recording, and
checking it before playing sound.
This is to prevent sound distortion
due to the double application of
the SRS effect when a user plays
the recorded file by using stereo
mix.
Click on Control Panel > Sound,
3 Voice
and Audio Device > SRS
Control Panel.
76
Using Recorders
This section describes how to perform recording on a computer by using Windows
Recorder.
Connect a microphone to the
1 microphone
jack.
Select Mic Volume from Show the
5 following
volume controls and click
OK.
Click Start > Control Panel >
2 Sounds,
Speech, and Audio
When Recording Control window
6 appears,
check the Select checkbox.
Devices > Sounds and Audio
Devices.
Increase the recording volume to
increase the recording sensitivity and
close the window.
Click Advanced from Volume and
3 then,
click Options > Properties.
Click Start > All Programs >
7 Accessories
> Entertainment >
Select Realtek HD Audio input from
4 the
mixer device to select Recording
Sound Recorder.
from Adjust Volume for.
Click the Record button to perform
8 recording.
The default recording duration of
Windows is 60 seconds. Download
a dedicated recording program from
the Internet to record audio data for a
long time.
77
Chapter 3.
Using the Network
Wired Network
79
Wireless Network
82
Wired Network
A wired network is a network environment used for a company network or broadband
internet connection at home.
a LAN cable to the
1 Connect
computer’s LAN port.
Select Local Area Connection and
3 click
the right button of the touch pad
and select Properties.
Click Start > Control Panel >
2 Network
and Internet Connections
The LAN Device name may differ
depending on your computer’s
Network Device.
> Network Connection.
79
Click General tab and select a LAN
4 driver
from Connect using:. Select
IP settings.
5 Configure
Select Obtain an IP address
Internet Protocol(TCP/IP) and click
Properties.
automatically when using DHCP. If
you use a static IP, select Use the
following IP address and enter the
values.
The displayed LAN driver may vary
depending on the LAN device type.
Click Install to add a network
component as shown in the figure
below: You can add a client, a
service, or a protocol.
If the IP of your computer is not
automatically assigned, contact the
network administrator.
If all settings are made, click OK. Now
6 the
network configuration is finished.
80

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Modify Date                     : 2009:09:02 16:33:02-07:00
Create Date                     : 2009:09:02 16:32:34-07:00
Title                           : Springfield_N130_XP_eng.indb
Creator                         : Adobe InDesign CS2 (4.0.5)
Producer                        : Adobe PDF Library 7.0
Page Count                      : 81
Mod Date                        : 2009:09:02 16:33:02-07:00
Creation Date                   : 2009:09:02 16:32:34-07:00
Metadata Date                   : 2009:09:02 16:33:02-07:00

EXIF Metadata provided by EXIF.tools