Schindler elevators PORT312VER1 Access Control User Manual
Schindler elevators Ltd Access Control
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1556411 |
| Application ID | iczf0JaxiJR9aXbElIxdpQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.15kB (364328 bits) |
| Date Submitted | 2011-10-07 00:00:00 |
| Date Available | 2011-10-07 00:00:00 |
| Creation Date | 2011-04-13 11:22:22 |
| Producing Software | BCL easyPDF 5.10 (0420) |
| Document Lastmod | 2011-04-13 11:22:22 |
| Document Title | User manual |
| Document Creator | Nitro PDF 5.1 |
Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno www.schindler.com PORT 3.1 Basic user and maintenace Manual PORT 3.1 User and maintenance Manual v.1.0 Version 1.0 1/2011 1/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com Safety Instructions Always read the safety instructions carefully Keep this User’s Manual for future reference Keep this equipment away from humidity If any of the following situation arises, get the equipment checked by a service technician: • The equipment has been exposed to moisture. • The equipment has been dropped and damaged. • The equipment has obvious sign of breakage. • The equipment has not been working well or you cannot get it work according to User’s Manual. Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. Maintenance and troubleshooting Software update and troubleshooting has to be executed only by Schindler qualified operators. No manipulation of the Terminal are allowed by no qualified Schindler operator. Version 1.1 5/2010 2/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com Index: Introduction ..................................................................................................................................................4 1.1 Application ...........................................................................................................................................4 1.2 Features...............................................................................................................................................4 1.3 Functionalities......................................................................................................................................4 1.4 Package contents.................................................................................................................................4 Installation and cabling .................................................................................................................................5 2.1 Cabling: ...............................................................................................................................................8 Characteristics:.............................................................................................................................................9 3.1 Port 3.1 characteristics:........................................................................................................................9 Power Supply, Communication connection: ..................................................................................................9 Operating conditions:....................................................................................................................................9 Mechanics and construction:.......................................................................................................................10 Regulatory Compliance ..............................................................................................................................11 7.1 EMC and safety compliance...............................................................................................................11 7.2 CE .....................................................................................................................................................11 European mark according to UE directives, Expert Opinion issued by: .......................................................11 Italian Institute IMQ SpA.............................................................................................................................11 7.3 CSA ...................................................................................................................................................11 7.4 FCC ...................................................................................................................................................12 7.5 WEEE Information .............................................................................................................................12 7.6 RoHS Information ..............................................................................................................................12 Support and trouble shooting ......................................................................................................................13 Version 1.1 5/2010 3/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 1 Introduction This document is a general description of the PORT device; type PORT 3.1. (PORT: Personal Occupant Requirement Terminal) The version called PORT 3.2 differs from PORT 3.1 only by the absence of keypad. 1.1 Application When you are committed to providing continuous service to a building's occupants as they go about their business, it is essential to have a consistent method of communicating with them. The extraordinary new PORT system can provide a whole range of command and communication functions from a wide variety of locations. Functions that utilize a standard hardware design which is as reliable as it is elegant. PORT 3.1 represents one such interface device with a specific application to allow entry. 1.2 Features The PORT 3.1 features an elegant combination of card reader, keypad and LED indication which may be used to control access. The version called PORT 3.2 differs from PORT 3.1 only by the absence of keypad. 1.3 Functionalities The PORT 3.1 device is used to control access through a door system utilizing either a proximity card, a preprogrammed pin code or a combination of both. The system is used to get access to the building. Any kind of Building can be considered for example Office, Hotel or Apartment. PORT 3.1 is a fully integrated component of The PORT Technology. 1.4 Package contents 1x 1x 1x 1x 1x 1x PORT 3.1 Card Reader Terminal Damping Pad Signal + Supply cable Wall mounted fastening material Small user and maintenance manual (this manual) Lock Tool (partly) Version 1.1 5/2010 4/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 2 Installation and cabling Version 1.1 5/2010 5/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com Version 1.1 5/2010 6/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com Version 1.1 5/2010 7/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 2.1 Cabling: Standard Cable length 10 m. Note: The AUXILIARY 24VDC input should not be used. If used a cable of MAXIMUM 3 m length is allowed. Version 1.1 5/2010 8/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 3 Characteristics: 3.1 Port 3.1 characteristics: Picture Characteristics Name Power Supply PORT 3.1 24 DVC +/- 10% Energy Consumption max. 2 W Ambient LED CPU Operating system Standby modus Beeper RGB Colours ATMEL ATMEGA64 / yes (if no card present or no button pushed) 13,56 MHz (RFID) ISO14443A, ISO14443B-2B, ISO144443B-3B, ISO15693 Mifare Classic, Mifare Ultra Light, Mifare 1K, Mifare 4K, Mifare DESFire (all other cards have to be pre-qualified by out test service center before use!) confirmation/alarm Network Serial UART connection Card Reader Frequency Card Reader Protocols Standard Card Types 4 Power Supply, Communication connection: Power supply 24 VDC +/- 10% <2W Power supply Input connector 24VDC IN Pin1 + Pin 2, Pin 3 - Communication ETH connector ETH-A connector ETH-B 5 Operating conditions: Humidity: Operating Temperature Storage temperature max 90 %, protection rating IP53 -10 to 60°C (14 to 140 °F) -40 – 85 °C Damage danger: Do not exceed these limits. Operating failure could occur! Version 1.1 5/2010 9/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 6 Mechanics and construction: PORT 3.1 mechanical drawing: Version 1.1 5/2010 10/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 7 Regulatory Compliance 7.1 EMC and safety compliance This equipment has been tested and found to comply with the above rules. Important! Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Use an approved phone set. 7.2 CE 0051 European mark according to UE directives, Expert Opinion issued by: Italian Institute IMQ SpA A valid CE Marking affixed to a product indicates that it complies with the relevant European 'New Approach' product safety Directives. 7.3 CSA US Safety mark according to United States and Canadian standards issued by CSA International CSA can test and certify products you are selling at home or exporting to the U.S.A. and Canada, eliminating the need for duplicate testing - saving you time and money. We test products to Canadian and U.S. standards and issue the CSA Mark for qualified products. CSA International can also test products to European and other national standards. Version 1.1 5/2010 11/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 7.4 FCC Label printed on product, refer to FCC Grantee Code: FCC ID: XFIPORT312VER1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 7.5 WEEE Information For EU (European Union) member users: According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. 7.6 RoHS Information RoHS, also known as Lead-Free, stands for Restriction of Hazardous Substances. RoHS Directive 2002/95/EC restricts the use of six hazardous materials found in electrical and electronic products. All applicable products in the EU market after July 1, 2006 must pass RoHS compliance. RoHS impacts the entire electronics industry. Version 1.1 5/2010 12/13 Schindler Elevators Ltd. NT-NB via della Pace 22 CH-6600 Locarno PORT 3.1 Basic user and maintenace Manual www.schindler.com 8 Support and trouble shooting Hotline Locarno: Schindler Elevators Ltd via della Pace 22 CH-6600 Locarno email: hotline_locarno@ch.schindler.com Tel: +4191 756 97 85 FAX: +4191 756 97 54 Compliance testing and certification of the product have been carried out and coordinated by Tecnolab del Lago Maggiore Srl, located in Verbania (ITALY). Version 1.1 5/2010 13/13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 13 Create Date : 2011:04:13 11:22:22+01:00 Modify Date : 2011:04:13 11:22:22+01:00 Producer : BCL easyPDF 5.10 (0420) Creator : Nitro PDF 5.1EXIF Metadata provided by EXIF.tools