Selex ES 774-0850 VS3000 GTW/ 806-870 User Manual VS3000 FPG3 MAN 0205 01 QRG A3 pm6

Download:
Mirror Download [FCC.gov]
Document ID	1761824
Application ID	8AuASejHxSuuzok6nyhAhA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.15kB (489364 bits)
Date Submitted	2012-08-08 00:00:00
Date Available	2012-08-08 00:00:00
Creation Date	2012-07-31 10:05:44
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2012-07-31 10:05:44
Document Title	VS3000-FPG3 - MAN-0205_01 QRG (A3).pm6
Document Creator	PageMaker 6.0
Document Author:	Pisanim

P/N MAN-0698/01.01
P/N MAN-0698/01.01
P/N MAN-0698/01.01
Menu structure
Displayed symbols
Controls, indicators and connectors
Menu
In Box (TMO, DMO, REP, FM)
Out Box (TMO, DMO, FM)
Text Message (TMO, DMO, FM)
Send Status (TMO, DMO, FM)
Char Size (TMO, DMO)
Network, searching network (flashing)
Messages (TMO, DMO, REP,
FM)
Change Mode (TMO, DMO,
REP, GTW, FM)
Encryption (TMO, and DMO only)
Phone Lists
Settings
Monitor (to check radio coverage,
E2EE Status (enable/
disable E2EE)
FM only)
GPS
Information
Help
E2EE Key
Group
(To see the configured groups, FM only)
Group Management
(TMO, DMO and GTW)
Calls (TMO and DMO only)
Delivery Options
(to select the kind of messages delivery
report, TMO and DMO)
Tx Inhibit
(to disable/enable the transmission, TMO
and DMO only)
Preferences
Bluetooth (TMO only)
Speech Monitor
(to enable/disable the functionality; REP and
GTW only)
SDS Monitor
(to enable/disable the functionality; REP
only)
Auxiliary Microphone
(to configure the kind of auxiliary microphone,
TMO, DMO and FM)
Full Duplex
(to set the type of full duplex: real or pseudo
full duplex, TMO only)
Activation/Deactivation
Devices
Find New
Devices List
Signal level (TMO and GTW mode)
Active Connections
Offered Services
Pin
(to change/enable/disable it)
Phone Book
(user defined TMO and
DMO only)
Direct Mode with Gateway equipment presence detected
Fallback Mode
Home TETRA
(pre-configured phone
book TMO and DMO only
Non TETRA
(pre-configured phone
book, TMO only)
Direct Mode
Repeater Mode (Repeater only)
Gateway Mode (Gateway only)
Key Access
(direct access keys are shown)
Direct Mode with Repeater equipment presence detected
Dialling
(dialling digits are shown; TMO and
DMO only)
Packet Data Context
Packet Data Channel
Supplementary String
(supplementary strings are shown;
TMO and DMO only)
E2E Crypto Enable
Symbols
(symbols meaning is shown)
Custom E2EE Error
Sounds
(to disable and to control the sounds
volume)
Display
(to configure display settings)
Presence Signalling
(to enable/disable the presence signal
transmission; REP only)
Backlight
(to change the display backlight modality)
Zoom
(to zoom in/zoom out the display)
WPS Selection (TMO, DMO and GTW)
Lit while the radio is transmitting; blinking while the transmission is inhibited (only TETRA).
WPS Update (TMO, DMO and GTW)
Full Queue, each message is read
Off hook key
The off hook green key is used to accept/make (after
having typed in the address) an individual full duplex call
and if pressed in idle status accesses the calls list.
On hook key
The on hook red key is used to end the connection. It is
also used to switch on/off the radio if kept pressed for a
few seconds.
Active Data Call
Active WPS
(to change the configuration of
the active WPS)
Bluetooth Activated
Earphone Speech Call
Extra WPS
(to move the groups assigned
by DGNA in the current WPS)
Active Speech Call
WPS Data
(to modify the current WPS parameters)
Keypad Volume Off
Group scanning Enabled
Group Attach Failure
SDS and voice communication monitoring (Repeater only)
Send TPNI
(enable/disable, DMO only)
Group Call
(to select the type of group call, TMO only)
Dial Mode
(to select the dialling modality)
Call Identification
(to choose if send or hide its own radio identifier,
TMO only)
Gateway <0>, <9>
(to select the default gateway from the gateway
list, TMO only)
Lemo
- Some menus can be or not available according to the configuration of
the radio terminal.
- Choosing some options of WPS menus can cause the ending of active
group calls.
Clear key
Keypad Locked
Communication
(with/without ack, DMO only)
Voice communication monitoring (Repeater and Gateway only)
SDS monitoring (Repeater only)
Switch audio
key
Helmet detected
Two versions are available:
• VS3000-FPG3 Vehicular configuration
• VS3000-FPG3 Motorcycle configuration
allows to switch the audio from the external
The key
loudspeakers to handset accessory and viceversa. (Active
only if the external loudspeaker and the handset are
connected to the radio).
Tx Active
12 pins
connector
UHF Network Channel
USB connector To be connected to USB-A mass storage device (for FPG3
(only vehicular) software download).
Earphone Audio Output
Quick Reference Guide
Clear/escape key.
Only for TETRA: if a group is selected, by pressing the
yellow key the writing "Dispatcher" on the display appears:
now, by pressing PTT (if the network allows this function)
the first available dispatcher of the selected group is called
(not the group). By pressing again the yellow key the name
of the selected group appears on the display and by
pressing PTT the selected group is called. If no group is
selected the yellow key allows to make an (half duplex)
individual/group call by pressing PTT (after having typed
in the address) even if the PTT default modality is set (by
PRP) for group/(half duplex) individual call.
Emergency key It lets the user send an emergency alarm.
Loudspeaker Audio Output
TETRA - Mobile Radio Terminal
To scroll up/down the menu items, select the option
and escape.
Rotary Knob Enabled
UHF Simplex Channel
VS3000-FPG3
Alphanumeric Alphanumeric keypad for dialling numbers and/or strings.
keypad
It is made up of 12 keys (10 digits plus
and
).
Yellow key
Group Data
(to modify the groups parameters)
& FM
the key, by pressing the key you select the function
associated to the relative symbol/writing.
Menu
navigation
keys
WPS Reconfigure (TMO, DMO and GTW)
SELEX Communications S.p.A. A Finmeccanica Company
Via Pieragostini, 80, 16151 - Genova, Italy
Function Keys When a symbol, or a writing, is present on the display near
No read Messages, Full queue with at least one message not
read (flashing)
Hands Free
NOTES:
Lit while the radio is receiving.
Red LED
Group Scanning
(to enable/disable it, TMO and DMO only)
In the vehicular configuration: during normal operation the
knob has the volume control function, turn it clockwise to
turn up the volume (16 levels) of the audio output of the
loudspeaker/earphone.
Turn the knob counterclockwise to decrease the volume.
If the knob is kept pressed until the alternate symbols S
and
appear on the display it goes to group-channel
selection function. Once in this modality turn the knob to
choose among the available groups and select the groupchannel by pressing the knob. Once pressed the knob you
go back to volume control function. If, in group-channel
selection modality, no operation on the knob is performed for
a pre-defined time interval, the knob automatically changeovers
to volume control function. Each changeover of knob function
is signalled to the operator by means of a confirmation beep.
In the Motorcycle configuration: the triple pushbutton allows
the same operativity of the knob.
(“+” to increase the volume/scroll up the groups;
“-” to decrease the volume/scroll down the groups;
“•” to switch from volume control to group selection/OK).
Green LED
Custom E2EE Enable
Late Entry
(to enable/disable the function)
Language
Volume
Controller/
Group channel
Selector
P/N MAN-0698/01.01
PTT (Not
located on the
FPG3 front
panel)
To be connected to audio accessories.
Push-To-Talk button, press it to talk during half duplex
conversation.
If pressed (in Idle status when a group-channel is selected, or after having typed in a group-channel address)
it sends the call to the group-channel. See also the yellow
key function description.
Before using the equipment, read all the
instructions contained in the manual and, with
special care, those relative to safety.
See the Safety Recommendation guide for FCC Approval.
Š 2010 SELEX Communications S.p.A. - All rights reserved.
SELEX Communications S.p.A. reserves the right to change specifications, performance or features relevant to the product described
without notice. This is an unpublished work the copyright in which vests in SELEX Communications S.p.A. The information contained
herein is confidential and the property of SELEX Communications S.p.A. and is supplied without liability for errors or omissions. No
part may be reproduced, disclosed or used except as authorised by contract or other written permission.
Change accesso- See the relative accessories user’s guide.
ries configuration
* * * * *
Send a status
Keep pressed the key
* * * * *
Switch on/switch
off the radio
for a few seconds.
Manage the PIN
PIN insertion at power on, can be:
* * * * *
(Personal Identifi- • Enable/disabled from menu
cation Number)
• Always enabled
• Always disabled
If PIN insertion is enabled, at power on the user must insert the
current PIN. In case of insertion of 3 consecutive wrong pin, the
current PUK must be inserted to unlock the radio. In case of 3
consecutive wrong PUK insertion the radio must be reprogrammed to be unlocked.
Adjust the
Volume
Change group channel
Lock/unlock
keypad
To adjust the volume of the various sounds access from main * *
menu to Settings → Preferences → Sounds.
In the vehicular configuration: to adjust the speech volume,
use the volume knob; turn it clockwise to increase the volume
and counterclockwise to decrease it.
In the Motorcycle configuration: the triple pushbutton allows the same operativity of the knob.
(“+” and “-” to increase/decrease the volume;
“•” to switch from volume control to group selection function).
Read a received
message (Inbox)
Press
and then (associated to menu) keys to lock the * * * * *
keypad; to unlock it press any key and follow the instructions
shown on the display.
Change modality Keep pressed key
for a few seconds. Otherwise select * * * *
TMO/DMO/REP/ Change mode from main menu and select the modality.
GTW/FM (*)
Each WPS is composed of a set of different groups related to * *
the group selector knob positions. Changing WPS you change
the groups that can be selected by means of the knob. To change
for a few seconds. Otherwise
WPS, keep pressed key
select Settings → Group Management → WPS Select.
Call a group /
Channel
Select the group by means of the relevant knob (in the vehicular * *
configuration) or the triple push button (in the motorcycle configuration), then press PTT to talk; otherwise type in the group address
and press PTT (if the PTT default modality is set (by PRP) for
individual call, press the key
before pressing the PTT).
Call the dispatcher
of the selected
group (if the network allows this
function)
Select the group by means of the relevant knob and press the *
key
. Now by pressing PTT the first available dispatcher of
the selected group is called (not the gorup). By pressing again
the key
and then the PTT the selected group is called.
Call the OPEN
GROUP
Keep pressed key
for a few seconds, then press PTT to talk.
Send a text message
In the Vehicular configuration: keep pressed the knob until * * * * *
the alternate symbols S and
appear on the display. The
radio is in group selection mode. Once in this modality turn the
knob to choose among the available groups-channel and select
the group by pressing the knob.
In the Motorcycle configuration: the triple pushbutton allows the same operativity of the knob.
(“+” and “-” to scroll the groups list;
“•” to switch from volume control to group selection and to
confirm the choose).
Change
Working Profile
Subset (WPS)
message
Access last calls
list
Access the text messages selecting from main menu Mes- * *
sages → Text Message. Create a new message or select a
predefined message then select OPT → Send.
Select an user ( ) or a group ( ) and send the message by
means of key
or selecting the option Send. During the
editing of a message it is possible to change from uppercase
to lowercase pressing the key
Access the received messages list from main menu selecting * *
Messages → Inbox. Use the keys
to scroll the list
of messages. The received messages can be status S or text
messages. Select the message to be read (VIEW) and
then OPT to choose among Delete-Reply-Reply+History.
From idle status press key
to display the list of the last 20 * *
received/made individual calls. Scroll them by means of keys
. It is possible to recall the subscriber pressing the
key
followed by the PTT pressing (Half-Duplex call) or
followed by the pressing of the key
(Full-Duplex call, TMO
only).
Make an individual Type in the address or select a subscriber from phone book *
full duplex speech then press key
call
* *
Enable/Disable
the SDS
monitoring
function
From main menu select Settings → SDS monitor, to change
the function status. If the SDS monitor is active the user will be
asked to deactivate it and vice versa. By pressing the key corresponding to YES the change is confirmed; by pressing the
key corresponding to NO or the key
the user can exit the
menu without modification.
Enable/Disable
the presence
signal
From main menu select Settings → Preferences →
Presence Signalling To enable the transmission of presence
signal select PsOn; select PsOff to disable it.
Visualize
GPS data
From main menu select GPS. The data relative to vehicle * * * * *
position will be shown on the display.
Connect with
Bluetooth device
(*)
With Bluetooth functionality active select the menu item Find *
New fromSettings → Bluetooth → Devices. Once the device
has been found check if it is "Trusted" or "Untrusted" through
the menu item Devices List from menu Settings →
Bluetooth → Devices, showing the device information. If the
device is "Untrusted" select OPT from the display showing the
device information, and then select Service Search.
How to...
Menu main items
Once the device is "Trusted" select OPT from the display
showing the device information, and then select Service List.
and
Choose the service scrolling the list through the keys
, select OPT and thenConnect, to connect to the service.
Deactivate
Bluetooth (*)
Make a call in
FM mode (*)
Messages
By means of this menu it is possible to send text and status
messages, and to read received messages and sent messages that
have been saved. It is also possible to define the text char size.
In Repeater mode with SDS Monitor active it is possible to read
the messages monitored by the radio.
To remove a Bluetooth device it is first necessary to discon- *
nect it closing and removing the relative service:
• select Settings → Bluetooth → Devices → Devices
List;
• scroll the device list till the device to be removed and
select OPT;
• select the item Service List and scroll the Service List till
the service to be close;
• select OPT and then Disconnect. Then, from the same
menu select Remove to remove the service.
Now it is possible to remove the device:
• select Settings → Bluetooth → Devices → Devices
List;
• scroll the device list till the device to be removed and
select OPT;
• select the item Remove Device
• press the key associated with "YES" to confirm the operation.
Change Mode
By means of this menu item it is possible to select the transmission protocol TMO/DMO/REP/GTW/FM.
Encryption (TETRA only)
By means of this menu it is possible to enable/disable the
encryption function.
Phone Lists
In TETRA mode, by means of this menu you can access the
phone books (whether user defined or predefined). In FM mode
you can directly access the FM users list.
To deactivate Bluetooth it is first necessary to remove all the *
Bluetooth accessories, then select Settings → Bluetooth
→ Deactivation.
for a
Access the monitor menu keeping pressed the key
Check the
few seconds from idle status, otherwise select item Monitor
coverage of other from main menu. Selecting Opt it is possible to choose among:
users
• Add (to add an user to be monitored);
• Delete (to remove an user to be monitored);
• View (to visualize the details of the last three radio coverage
checks of the specific user).
From main menu select Settings → Speech monitor, to
change the function status. If the speech monitor is active the
user will be asked to deactivate it and vice versa. By pressing
the key corresponding to YES the change is confirmed; by pressing the key corresponding to NO or the key
the user can exit
the menu without modification.
Activate Bluetooth Activate Bluetooth functionality selecting Settings → *
(*)
Bluetooth → Activation. Once Bluetooth is active the symbol appears on the radio display. Note: If the radio is turned
off with the Bluetooth active, at the successive switch on the
Bluetooth is deactivated.
P/N MAN-0698/01.01
Remove
Bluetooth device
(*)
Enable/Disable
the speech
monitoring
function
Make an individual Type in the address or select a subscriber from phone book * *
half duplex speech then press PTT (if the PTT default modality is set (by PRP) for
call
group call, press the key
before pressing the PTT).
Send an emerKeep pressed the emergency key at least for 2 seconds.
* *
gency alarm
In TETRA mode the radio can be programmed to: send a call
request, send an SDS, send a call request and an SDS, at the
emergency key pressing.
In FM mode, the radio sends an alarm until another radio gives
the received alarm signal throught the key
Go back in a group
It is possible to go back in a group call which is still active and * *
call
from which you have disconnected: in TMO by pressing the
PTT and in DMO by keeping pressed the key
Access the send status menu, pressing the key associated * *
with S when the radio is in idle status or selecting from main
menu: Messages → Send Status.
Select the status to be sent, then select an user by means of the
or a group by means of the key assokey associated with
ciated with
. To send the message use the key
or select
the Send option.
P/N MAN-0698/01.01
TMO
DMO
REP
GTW
FM
How to...
How to...
TMO
DMO
REP
GTW
FM
P/N MAN-0698/01.01
TMO
DMO
REP
GTW
FM
P/N MAN-0698/01.01
To make a call in FM mode (whether to a user or to a group)
dial the user or the group address to be called, or select the
. Press
address from the Phone lists and press the key
PTT to talk.
(*) Function not available for U.S. market
TETRA Operating modes
The vehicular radio terminal can work in four different TETRA
operating modes, depending on the protocol selected in menu
Change Mode: Trunked Mode (TMO), Direct Mode (DMO), Repeater Mode (REP), Gateway Mode (GTW).
Settings
Through the sub-menus of this item it is possible to configure
several options of the radio terminal. For example (in TETRA
mode) it is possible to inhibit the transmission (Tx Inhibit), to
manage the working profiles WPS (Group Management), to access the Bluetooth functionalities.
Furthermore through the Preferences menu the user can personalize the terminal, setting: language, sounds volume, backlight,
zoom in/zoom out. It is also possible in REP mode, to enable or
disable the presence signal transmission.
In REP or GTW mode it is also possible to enable or disable the
speech monitor function and only in REP mode the SDS monitor
function.
Monitor (FM only) (*)
By means of menu Monitor it is possible to check the radio
coverage of other FM radio users.
GPS
This menu allows to display the GPS data information.
Information
This menu allows to display the equipment information.
Help
Selecting Help from main menu it is possible to visualize the
direct access keys function (direct access keys are available even
during calls). Within the Help menu are also shown: the description of the strings to be dialled to define the call priority, the
gateways and the address composition method (for TETRA). It is
also possible to visualize a brief description of the symbols that
can appear on the display.
NOTE:
For what concerns technical characteristics, reference standard,
maintenance and troubleshooting, refer to the relevant technical handbook.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e5a03aae-f76d-429c-86f2-b9ae7d5d1f93
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2012:07:31 10:05:44+02:00
Creator Tool                    : PageMaker 6.0
Modify Date                     : 2012:07:31 10:05:44+02:00
Document ID                     : uuid:6235477d-bf53-411d-8e50-b7f0ed67cc8b
Format                          : application/pdf
Title                           : VS3000-FPG3 - MAN-0205_01 QRG (A3).pm6
Creator                         : Pisanim
Author                          : Pisanim

EXIF Metadata provided by EXIF.tools