Sharp HRO00101 Cellular Phone User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1111262
Application ID	65zPUjuO6Ovbf1GHQ3O/eQ==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.16kB (1664453 bits)
Date Submitted	2009-05-15 00:00:00
Date Available	2009-06-29 00:00:00
Creation Date	2009-04-24 10:25:17
Document Lastmod	2009-04-24 10:25:39
Document Title	Users Manual 2

dv67_E.book
39 ページ
２００９年４月２２日
水曜日
午後５時３３分
Selecting a function from Submenu
Support Book
Displaying Support Book
Use this function for unsure operations. After
the Support Book appears, check the
explanation and operation procedures of each
function. In addition, directly start functions
that were looked up in the Support Book.
Submenu screen
■ Target data when operating functions from Submenu
When operating functions from Submenu of data list screen, some
functions target at selected data only while other functions target at all
data in the list screen. When attempting to operate selected data only,
select the data to operate in advance.
 Function targeting at selected data only
Example: Edit title, Edit file name, Delete one, etc.
 Function targeting at all data in the list screen
Example: Delete all, Copy all in folder, Move all in folder, etc.
In stand-by, press $/[Support Book].
Select a menu or item/t.
: To start functions directly: Select the function to start/t/[Yes].
Before Using the Handset
When [Submenu] appears in the operation guidance,
press C to display functions (Submenu) that can be
used in the screen. Select the displayed Submenu
with w or the Optical TOUCH CRUISER.
If there are multiple pages in the Submenu, change
pages with w or the Optical TOUCH CRUISER.
Alternatively, press the dial key corresponding to the
menu item number (U, V, W, etc.) to select a
function. However, some Submenus do not have item
numbers.
FOMA card
Using FOMA card
A FOMA card is an IC card that records personal information,
such as phone numbers. A FOMA card can store phonebook data
and SMS. By switching FOMA cards, multiple FOMA terminals
can be used for different purposes as needed.
If a FOMA card is not inserted, transmission functions such as voice/
Videophone calls, i-mode, mail transmission and packet transmission are
not available on the FOMA terminal.
Inserting/Removing FOMA card
Before inserting or removing the FOMA card, turn off the power, position
the back facing upwards and remove the battery pack. Close and hold
the FOMA terminal securely with your both hands.
39
e02_dv67_7e.fm
[39/50]
dv67_E.book
40 ページ
２００９年４月２２日
水曜日
午後５時３３分
■ Inserting FOMA card
Before Using the Handset
Hook a finger on the tab and pull the tray out (1).
Hold the FOMA card with the IC
facing up and set on the tray (2).
: Pull out the tray straight until it stops.
Notch
IC (gold)
3 Push the tray all the way in (3).
Tray
■ Removing FOMA card
Hook a finger on the tab, pull the tray out (1) and
remove the FOMA card (2).
: Do not allow the FOMA card to fall when removing it.
Inserting or removing the FOMA card forcibly may damage the card or
deform the tray. Use caution.
Refer to the FOMA card user’s guide for more information on the FOMA
card.
Do not misplace the FOMA card once it is taken out.
When the tray falls off, slide the tray in straight along the guide rail.
40
e02_dv67_7e.fm
[40/50]
FOMA card security functions

Fit the notch of the FOMA card to
that of the tray.
1 Tab
Security codes
The FOMA card has a “PIN1 code” and a “PIN2 code”.
Both are set to [0000] by default but can be changed to a four- to eight-digit
number by the user (nP. 110).
The FOMA terminal has built-in FOMA card security functions (FOMA card
restriction functions) as functions for protecting personal data and files.
When data or files are retrieved using any of the following methods or
i-appli is running with the FOMA card inserted into the FOMA terminal,
FOMA card security functions are automatically set in the retrieved data
or files.
 When a file such as an image, melody or PDF is downloaded from a
site or Internet web page
 When a site or Internet web page is added in screen memo
 When i-mode mail with a file attached is received
 When i-appli is running
Data, files or software with FOMA card security functions run only when
in use with the FOMA card inserted at time of acquisition. Display, play,
attach to i-mode mail, run software, send data using Ir communication
function and iC communication function, and copy to microSD Card can
be executed. These operations cannot be performed if a different FOMA
card is inserted.
dv67_E.book
41 ページ
２００９年４月２２日
水曜日
午後５時３３分
One’s own
FOMA card
One’s own FOMA
card security functions
are set for
downloaded data, files
attached to received
mail and i-appli that
have been run,
allowing viewing and
playback of data.
Another’s
FOMA card
Before Using the Handset
The following indicates the data for which FOMA card security is set.
 Melody
 Image (including animation and Flash movie)
 Screen memo  Chaku-utaÂŽ/Chaku-uta fullÂŽ
 Chara-den
 File attached to Message R/F
 i-motion
 ToruCa (details) image
 PDF data
 Image inserted to Deco-mail or signature
 Kisekae Tool
 Videophone picture memo
 Machi-chara
 i-appli (including i-appli stand-by)
 Download dictionary
 Download font  Contents transfer compatible data
 Image in Message R/F
 Music&Video Channel program
 Deco-mail template with data which FOMA card security functions are
set
 Decome-Anime Template
 e-book/e-dictionary/e-comic saved in the [Comic] folder
 File attached to i-mode mail other than the following
• ToruCa
• Phonebook
• Schedule
• Bookmark
• Documents
※ “Chaku-uta” is a registered trademark of the Sony Music
Entertainment (Japan) Inc.
The following indicates the settings saved in the FOMA card.
 Own number
 PIN setting
 Select language
 SSL/TLS certificates
 SMS center
 SMS expiry
 SMS input character
The following explanation refers to the FOMA card inserted at time of
data/files retrieval as “one’s own FOMA card” and other FOMA cards as
“another’s FOMA card”.
When another’s
FOMA card is
inserted, data with
one’s own FOMA
card security
functions set cannot
be viewed or played.
Different FOMA card
inserted
When one’s own FOMA card is replaced with another’s FOMA card, the
data or files for which FOMA card security functions are set cannot be
set as stand-by displays or ring tones.
When a FOMA card is replaced with another’s FOMA card, FOMA card
security functions are activated and if data or file retrieved from a site is
set as the stand-by display or ring tone, the setting is reset to the
default. When one’s own FOMA card is re-inserted, the setting returns.
Example: When setting [Melody A], for which FOMA card
security functions are set, as a ring tone
When one’s own FOMA card is taken out or is replaced with another’s
FOMA card, ring tone returns to default setting. When one’s own FOMA
card is put back, the ring tone returns to [Melody A].
FOMA card security functions cannot be set for data received using Ir
communication or data transmission functions, and still/moving
pictures, etc. shot with the FOMA terminal.
It is possible to move or delete data or files for which FOMA card
security functions are set even when another’s FOMA card is inserted.
Running i-appli by selecting highlighted text in i-mode mail details
screen cannot be performed or retrieved when FOMA card security
functions are set.
Continued on next page
e02_dv67_7e.fm
[41/50]
41
dv67_E.book
42 ページ
２００９年４月２２日
水曜日
午後５時３３分
If the FOMA card is replaced with another’s FOMA card after i-appli
stand-by is set, the set i-appli cannot be activated in stand-by, and the
image set in Stand-by display appears.
Attaching/Removing battery pack
Use the Battery Pack SH22 exclusive to the FOMA terminal.
Before Using the Handset
FOMA card type
Note the following differences between “FOMA card (blue)” and “FOMA
card (green/white)” used on the FOMA terminal.
Function
FOMA card
(blue)
FOMA card
(green/white)
Page
Number of phone number digits
available in the FOMA card
phonebook
Up to 20 digits
Up to 26 digits
P. 79
Client certificate operations for
FirstPass
Not available
Available
P. 183
Use of WORLD WING
Not available
Available
P. 428
Service Numbers
Not available
Available
P. 418
Turn off the power, close the FOMA terminal, and hold it in your both
hands before attaching or removing the battery pack.
■ Attaching battery pack
Push the back cover in the direction of the arrow (1),
slide approximately 2 mm (2) and remove the back
cover (3).
Attach the battery pack (4).
About WORLD WING
WORLD WING is a DOCOMO’s FOMA international roaming service that
makes it possible to use the mobile phone number registered in Japan to
make and receive calls even overseas by the FOMA card (green/white)
and supported FOMA terminal.
If subscribed to the FOMA service after September 1, 2005,
subscription for “WORLD WING” is not required. However, if
subscription for “WORLD WING” is canceled at or after subscription for
the FOMA service, subscription for “WORLD WING” is required again.
If subscribed to the FOMA service before August 31, 2005 but not
subscribed to “WORLD WING”, subscription for “WORLD WING” is
required.
Some payment plans are not available.
When the FOMA card (green/white) is lost or stolen overseas, promptly
contact DOCOMO and conduct a procedure for canceling the use of
service. Refer to General Inquiries on the back of this manual for
inquiries. Note that transmission/calling charges after the FOMA card
is lost or stolen are incurred to the subscriber.
42
e02_dv67_7e.fm
[42/50]
: The FOMA terminal has tabs that make it easy to attach. Attach the
battery pack with a recycle mark side faced up.
Face the side with a
recycle mark up
Battery pack
Tabs
Battery pack connector terminal side
dv67_E.book
43 ページ
２００９年４月２２日
水曜日
午後５時３３分
the back cover (5).
3 Attach
: Place the back cover as shown in the illustration and then push the
back cover and slide.
Charging
Before Using the Handset
The battery pack is not fully charged at the time of purchase. Be
sure to charge the battery using the exclusive AC or DC adapter
(sold separately) before use.
■ Cautions while charging
■ Removing battery pack
Follow step 1 of “Attaching battery pack” to remove
the back cover.
Remove the battery pack.
: The battery pack has a tab that makes it easy to remove. Hook a
finger on the tab to prevent excessive force on it and remove the
battery pack upward.
Tab
Using unnecessary force when attaching or removing the battery pack
may damage the connector terminal for the battery pack (charger
terminal) on the FOMA terminal.
Securely close the back cover. If not closed securely, the back cover
may come off and the battery pack may fall out due to vibration.
Do not charge for long periods of time with the power left on. If the FOMA
terminal is left on after charging is complete, the battery pack charge
decreases.
In such cases, the AC or DC adapter charges the battery again.
However, depending on when the FOMA terminal is disconnected from
the AC or DC adapter, the battery charge level may be low, the battery
alert tone may sound, or the battery may only be usable for a short time.
When the battery is empty and terminal is recharging, charging LED may
not illuminate immediately.
If the battery empty alert is displayed, the alert tone sounds and the
power cannot be turned on, charge the battery for a while.
If the battery empty alert is displayed and charging begins within 60
seconds of the alert tone, the status returns to normal.
While charging, terminal may not turn on even when charging LED is
illuminated in red. Charge longer and try turning power on again.
Frequently recharging the battery when its power is still remaining
enough may shorten the life of the battery pack. It is recommended to
use the battery to a certain level before recharging.
■ Estimated charge times and LED display
The following figures are estimated times for charging an empty battery
pack with the FOMA terminal turned off.
FOMA AC Adapter 01/02
Approx. $$ min
FOMA DC Adapter 01/02
Approx. $$ min
Charging LED illuminates in red while charging, and it turns off when
charging is completed.
Continued on next page
e02_dv67_7e.fm
[43/50]
43
dv67_E.book
44 ページ
２００９年４月２２日
水曜日
午後５時３３分
Before Using the Handset
Check that the battery pack has been properly attached when charging
LED flashes red. The LED also flashes red when the battery pack has
reached the end of its service life.
The battery pack can also be charged with the FOMA terminal turned on
(Battery icon flashes during charging).
When the battery becomes warm, charging may automatically stop even
if the battery has not been fully charged. Charging resumes after the
temperature lowers to an appropriate temperature. While charging is
stopped, charging LED turns off (Battery icon flashes while stopped).
■ Estimated times of use when fully charged
Continuous FOMA/3G
talk time
GSM
Videophone call: Approx. $$ min
(Substitute image: Approx. $$ min)
Voice call: Approx. $$ min
Continuous FOMA/ 3G/GSM
stand-by
3G
setting: 3G
time
3G/GSM
setting: AUTO
GSM
Voice call: Approx. $$ min
3G/GSM
setting: AUTO
1Seg watching time
44
e02_dv67_7e.fm
[44/50]
When mobile: Approx. $$ hr
When mobile: Approx. $$ hr
At rest: Approx. $$ hr
At rest: Approx. $$ hr
Approx. $$ min
Continuous talk time is estimated as the usage time at normal
transmission signal strength, and continuous stand-by time is estimated
as the usage time while moving with the FOMA terminal folded at normal
signal strength. Using i-mode reduces talk (transmission)/stand-by time.
When i-Channel is subscribed, information is automatically received and
updated, so talk (transmission)/stand-by time will be reduced. In addition,
when shooting or editing an image, watching 1Seg, composing i-mode
mail, activating the downloaded i-appli or the i-appli stand-by, or using
MUSIC Player, i-motion player, Bluetooth function or data
communication, the talk (transmission)/stand-by time will be reduced
even if calls or i-mode transmission are not made. Some i-appli software
may continue transmission even after downloading. To avoid this, set not
to connect in advance.
The actual usage time is a combination of stand-by time and talk time,
and the longer the talk time, the shorter the stand-by time becomes.
1Seg watching time is estimated as the watching time at normal
transmission signal strength with the Stereo Earphone Set 01 (sold
separately) used.
Talk (transmission)/stand-by time may be reduced by about half or 1Seg
watching time may be shortened depending on battery pack status,
function used, temperature and other environmental conditions, or signal
strength (no signal or weak signal).
■ Battery pack service life
Battery pack is a consumable product. Service time per charge is
gradually reduced every time the battery is charged.
When service time per charge is reduced to about half of the default time,
this means that the battery pack is approaching the end of its service life.
In such a case, it is recommended to replace the battery pack as soon as
possible. Depending on usage, the battery pack may swell as it
approaches the end of its service life but this will not cause problems.
If i-appli, Videophone, or 1Seg is used while charging for a long time, the
service life of the battery pack may become shorter than estimated.
To prevent damage to the environment, bring used battery
packs to a docomo service counter, a docomo agent or a
recycle center.
dv67_E.book
45 ページ
２００９年４月２２日
水曜日
午後５時３３分
: Check the direction (See diagram) of
the connector, keep it parallel with
the FOMA terminal and securely
push all the way in until it clicks.
■ About charging batteries
Before Using the Handset
Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately),
FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC
Adapter 01/02 (sold separately).
FOMA AC Adapter 01 covers only 100V AC. FOMA AC Adapter 02/
FOMA AC Adapter 01 for Global use covers from 100 to 240V AC.
The shape of the plug for the AC adapter is for 100V AC (for domestic
use). To use the AC adapter of 100 to 240V AC overseas, a conversion
plug adapter that is compatible with the voltage of your country of stay is
required. Do not use a transformer for use overseas to charge the
battery.
When inserting the AC adapter power plug into an
outlet or inserting the DC adapter power plug into a
car cigarette lighter socket, Charge start sound is
heard, charging LED illuminates, and charging starts.
100V AC
outlet
Charging by using AC adapter/DC adapter
[Read “FOMA AC Adapter 01/02 (sold separately) and FOMA DC
Adapter 01/02 (sold separately) user’s guide” carefully.]
Battery pack can be charged even with the FOMA terminal opened or in
the Cycloid position.
Open the external connector terminal cover and insert
the AC or DC adapter connector horizontally into the
external connector terminal (1).
Cigarette
lighter socket
For AC adapter
For DC adapter
3 When Charge end sound is heard and charging LED
turns off, charging is complete.
: When removing the connector, always hold the release buttons on
both sides (1) and unplug it horizontally (2).
External connector
terminal
Charging LED
Release buttons
External connector terminal cover
Connector (Face the side with the arrows up)
Continued on next page
e02_dv67_7e.fm
[45/50]
45
dv67_E.book
46 ページ
２００９年４月２２日
水曜日
午後５時３３分
Do not forcibly insert or remove. May cause damage to the external
connector terminal and the connector.
Pull the adapter out of the outlet or cigarette lighter socket if it will not be
used for a long time.
Before Using the Handset
Do not forcefully pull the external connector terminal cover. May
damage the cover.
Do not place objects near the FOMA terminal when charging. May
damage the FOMA terminal.
When using a DC adapter
Charging LED
Connector
(Face the side
with the arrows
up)
The DC adapter should only be used in negative grounded vehicles (12
and 24V DC).
Do not use with the car engine shut off. May drain the car battery.
The DC adapter fuse (2A) is a consumable. For replacement, purchase
a new fuse at a local automobile supply shop.
100V AC
outlet
Refer to the FOMA DC Adapter 01/02 user’s guide for details.
Charging by using desktop holder
FOMA AC
Adapter 01/02
Battery pack can be charged even with the FOMA terminal opened or in
the Cycloid position.
Face the side with the arrows of the AC adapter
connector up and insert it into the connector terminal
of the desktop holder (1).
: Keeping the connector parallel with the desktop holder, securely
push it all the way in until it clicks.
3 When placing the FOMA terminal in the desktop
Insert the AC adapter power plug into an outlet (2).
holder, Charge start sound is heard, charging LED
illuminates, and charging starts.
: Place the FOMA terminal as the figure shows (3), and push it in the
direction of the arrow (4) until it clicks.
46
e02_dv67_7e.fm
[46/50]
When Charge end sound is heard and charging LED
turns off, charging is complete.
: Hold the desktop holder and lift the FOMA terminal out.
Pull the AC adapter out of the outlet when left unused for a long period
of time.
When Charge start sound is not heard or when charging LED does not
illuminate, check that the FOMA terminal is placed securely in the
desktop holder (except when terminal is turned off, Manner mode is set
or Charge start sound is Silent).
When placing the FOMA terminal in the desktop holder, be careful that
the strap is not caught in between the handset and the desktop holder.
dv67_E.book
47 ページ
２００９年４月２２日
水曜日
午後５時３３分
When the FOMA terminal placed in the desktop holder is set to the
Cycloid position, operate while holding it so as not to come off from the
desktop holder.
: Battery level is displayed in percentage and graphic. In addition, it is
notified by the number of the battery level sound according to its
remaining amount.
Graphic
Five times
Checking battery level
If the battery icon is changed to [電池残量$$], battery level is displayed in
percentage. However, [&] appears when battery level is 100% while
[(] appears when battery level is 4% or less.
The battery icon and Percentage are rough indications.
If the FOMA terminal is left for a long time or the power remains on, the
battery level may reduce even after charging is complete.
81 to 100%
Battery is sufficiently
remaining.
61 to 80%
Battery is remaining.
41 to 60%
Battery level is low.
21 to 40%
Battery level is very low.
1 to 20%
Battery is almost empty.
Charge the battery.
0%
Battery is empty (Power will
turn off soon).
■ Changing design of battery icon 
In the Custom menu, select [Settings]/[Battery]/
[Battery icon]/i.
Select an image/i.
Checking battery level with sound and display
Number of beep sound
Before Using the Handset
Battery level
Four times
Three times
Twice
Once
: Wait approximately 5 seconds and the display disappears.
: The battery level sound is heard at the volume set in Key sound
(nP. 90).
: If the Manner mode is set, the battery level sound follows the setting
of the Manner mode.
If battery runs out
[Battery empty. Unsaved data will be lost. Ending current
operation] appears if battery starts to run out (Press t to
clear the message). After a while, an alert tone sounds.
The warning screen stating that the battery runs out
appears, handset operations are disabled and power turns off after
approximately 60 seconds.
During a voice/Videophone call, the alert tone sounds and [Battery
empty. Unsaved data will be lost. Ending current operation] appears. The
call is disconnected after approximately 20 seconds. At the same time,
the screen above appears and after approximately 60 seconds, the
power turns off.
Alert tone does not sound when Manner mode or Public mode (Drive
mode) is set (Alert tone sounds during a call).
In the Custom menu, select [Settings]/[Battery]/
[Battery level].
47
e02_dv67_7e.fm
[47/50]
dv67_E.book
48 ページ
２００９年４月２２日
水曜日
午後５時３３分
Turning power OFF
Power ON/OFF
Turning power ON/OFF
Before Using the Handset
Turning power ON
Press H (for 2+ seconds).
: It may take some time for the wakeup screen to appear.
: The wakeup screen appears followed by the initial settings screen.
Proceed to Initial setting (nP. 48).
: If initial settings have been completed, the
screen shown on the right appears when
power is turned on. This screen is called the
“stand-by display”.
Welcome mail
: “Welcome-ドコモ動画#”
(Welcome-docomo-doga#) and “緊急速報
「エリアメール」
のご案内” (Information of Early
Warning “Area Mail”) are saved by default.
: To check a welcome mail: In stand-by, press
t/select the stock icon [C] (mail
message)/t.
• For details on the following operations
Stand-by display
nP. 138
If initial settings are not yet completed, the setting screen appears every
time the power is turned on.
If the FOMA card is not inserted, [Insert UIM] and a FOMA card error
appear (nP. 31).
When [Enter PIN1 code] appears, enter the PIN1 code (nP. 109).
When a FOMA card is replaced with a new card, the terminal security
code (four to eight digits) must be entered after turning on the terminal.
If a correct terminal security code is entered, stand-by display appears.
When a wrong terminal security code is entered five times, the power is
turned off. However, turning on the power again is possible.
When [A] appears, the handset is outside the service area or in a
place with no signal. Move to a place where the icon disappears.
48
e02_dv67_7e.fm
[48/50]
Press H (for 2+ seconds).
: It may take some time for the power to be turned off (The end screen
appears on the display until the power is turned off).
Select language
Changing screen display to English
In the Custom menu, select [設定]/[一般設定]/
[Bilingual]/[English].
: To switch the display language from English to Japanese: In the
Custom menu, select [Settings]/[General settings]/[Select
language]/[日本語].
If a FOMA card is inserted, settings are saved to the FOMA card as
well. When the setting of the FOMA terminal handset and the setting of
the inserted FOMA card are different, the setting in the FOMA card is
prioritized.
Initial setting
Making initial setting
The initial settings screen appears automatically when the power
is turned on for the first time. Each setting item can also be set
from Menu (When the initial settings are complete, the stand-by
display appears).
 Date and time settings
 Change terminal security code
 Key sound
 Location request menu
 Set all font size
When items that have not been set remain, the setting screen appears
every time the power is turned on.
Alternatively, select [Settings]/[Initial setting] in the Custom menu to
display the setting screen.
Set the date and time (nP. 49).
Register a terminal security code (nP. 109).
dv67_E.book
49 ページ
２００９年４月２２日
水曜日
午後５時３３分
confirmation screen appears. Read the description and select
[Agree] (When the initial settings are made from the menu or the
software update is set to other than [auto-update], the confirmation
screen does not appear).
Press H to cancel the initial settings.
Date settings
Setting date and time
Set the date and time on the FOMA terminal.
In the Custom menu, select
[Settings]/[General settings]/[Date
settings].
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for approximately 30
seconds or more, the settings are reset. Also, if the battery remains
empty, the settings may be reset. When this happens, set again after
charging the battery.
Before Using the Handset
3 Set the Key sound (nP. 90).
4 Set GPS Location provision ON/OFF (nP. 304).
the font size collectively (nP. 105).
5 Set
: When the initial settings are complete, the software update function
If the date and time are not set correctly, the following functions cannot
be used properly.
 Redial, Received calls
 Auto power ON/OFF
 Alarm
 Schedule
 SSL/TLS (authentication)
 i-appli Auto start
 Starting i-appliDX
 Reception, Recording
 Machi-chara
 Software update
 Pattern definitions update
 Record message (voice), Record message (Videophone calls)
 Camera image titles/shooting date
 Playback of i-motion or music data with expiration date/period for
replay
 View of e-books/e-dictionaries/e-comics with expiration date/period
for browse
When [Auto time correction] is set to [ON]
When the power is turned on, the FOMA terminal adjusts the time by
connecting to the network’s time information.
If the FOMA terminal does not adjust the time even when the power is
turned on, turn off the power and restart.
Select the [Auto time correction] field/t/select the
setting.
Time may not be adjusted depending on the signal status.
; Select [ON]/i.
; Select [OFF]/select the [Date] field/t/enter the date/t/
select the [Time] field/t/enter the time (24-hour format)/
t/i.
• When entering month, day and time, add 0 before numbers one
through nine (example: 01, 02, 03, etc.).
• Set the date and time from 00:00 January 1, 2001 to 23:59
December 31, 2050.
When time difference is adjusted overseas, the local time and date and
[!] appear in Redial, Received calls, Received/Sent messages history
(SMS only), received/sent mails list and location history list. The
received/sent mails are not displayed in order of the displayed time and
date but the mail reception/send.
When Limit settings is set to [Enable], the terminal security code must
be entered in the Date settings.
Time correction may not be performed depending on the overseas
telecommunications carriers. Change the time zone manually.
Time may be off by a few seconds.
[!] does not appear in the Unsent messages for mail messages. If the
date order display is set for the Unsent messages, unsent mails are
displayed in the order of the displayed time and date.
Continued on next page
e02_dv67_7e.fm
[49/50]
49
dv67_E.book
50 ページ
２００９年４月２２日
水曜日
午後５時３３分
Before Using the Handset
During overseas use, Japan time and local time (or time set in City)
appear in the dual display except for the following cases.
 When Auto time correction is set to [ON] and time correction
information is not being received from an overseas network
 When Auto time correction is set to [OFF] and City is set to the city in
the same time zone as Japan
■ Changing time zone manually 
In the Date settings screen, select the [Auto time
correction] field/t/[OFF]/C.
2 Select a time zone/t.
3 Select a city/t/i.
Notify caller ID
Notifying the other party of your phone
number
Display your number (caller ID) on the other party’s phone
(display) when making a voice/Videophone call.
Handset number (caller ID) is important personal information. Be very
careful about your caller ID setting.
The Notify caller ID function is available only on compatible phone
devices.
Setting Notify caller ID/No caller ID in advance
In the Custom menu, select [Settings]/[NW
Services]/[Notify caller ID].
Select [Activate/Deactivate].
: To check the setting: Select [Check setting].
the setting.
3 Select
: To notify caller ID: Select [Yes].
: To not notify caller ID: Select [No].
50
e02_dv67_7e.fm
[50/50]
Notify caller ID setting cannot be set from outside the service area.
Own number
Checking your own phone number
When checking your own phone number during a call nP. 54
In the Custom menu, press 0.
: Alternatively, select [Phone]/[Own number] (or [Settings]/
[General settings]/[Check status]/[Own number]).
: To switch between Number A and Number B (when 2in1 [Dual mode]
is used): Press i.
When changing the Number B of 2in1, use any of the following methods
to obtain the correct Number B.
 Set 2in1 function OFF and then perform 2in1 setting again to set
2in1 function ON
 Check the 2in1 subscription
When a FOMA card exchange (2in1 subscriber b 2in1 nonsubscriber)
is performed, set 2in1 function OFF.
When a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is
performed, check the 2in1 subscription.
For details on Owner information nP. 384
dv67_E.book
299 ページ
２００９年４月２２日
水曜日
午後５時３３分
Map/GPS Function
Using Map/GPS function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
Checking your location . . . . . . . . . . . . . . . . . . . . . . 301
Setting position location . . . . . . . . . . . . . . . . . . . . . . 302
Viewing Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .