Siemens 277IWLAN-V100 Mobile Panel 277 IWLAN User Manual UserMan Statements

Siemens AG Mobile Panel 277 IWLAN UserMan Statements

Contents

UserMan Statements

SIMATIC HMI
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
Produktinformation
Gültigkeit
Diese Produktinformation enthält wichtige Hinweise. Die Produktinformation ist gültig für folgende Bediengeräte:
Mobile Panel 277 IWLAN, Bestellnummern 6AV6 645-0DD01-0AX0 und 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, Bestellnummern 6AV6 645-0DB01-0AX0 und 6AV6 645-0DC01-0AX0
Funkzulassungen
VORSICHT
Die folgende Übersicht informiert Sie über die möglichen Funkzulassungen.
Für das Bediengerät selbst gelten nur die jeweils auf der Geräterückseite angegebenen Funkzulassungen.
CE-Zulassung
Die Produkte
Mobile Panel 277 IWLAN, Bestellnummern 6AV6 645-0DD01-0AX0 und 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, Bestellnummern 6AV6 645-0DB01-0AX0 und 6AV6 645-0DC01-0AX0
stimmen in der von Siemens A&D in Verkehr gebrachten Ausführung mit den Vorschriften der folgenden europäischen
Richtlinie überein:
99/5/EG
Richtlinie des europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über
Funkanlagen und Telekommunikationsendeinrichtungen und die gegenseitige Anerkennung ihrer Konformität.
Die Konformität mit den grundlegenden Anforderungen der Richtlinie wird nachgewiesen durch die Einhaltung folgender
Normen:
EN 60950 Sicherheit von Einrichtungen der Informationstechnik
EN 301489-1 Elektromagnetische Verträglichkeit für Funkeinrichtungen und -dienste
EN 301489-17 Spezifische Bedingungen für Breitband-Datenübertragungssysteme und für Einrichtungen in lokalen
Hochleistungs-Funknetzen (HIPERLAN)
EN 300328 Elektromagnetische Verträglichkeit und Funkspektrumangelegenheiten
EN 301893 Breitband-Funkzugangsnetze (BRAN) - 5-GHz-Hochleistungs-RLAN
EN 50371 Übereinstimmung von elektronischen und elektrischen Geräten kleiner Leistung mit den
Basisgrenzwerten für die Sicherheit von Personen in elektromagnetischen Feldern (10 MHz bis 300
GHz)
1999/519/EC Empfehlung des Rates zur Begrenzung der Exposition der Bevölkerung gegenüber
elektromagnetischen Feldern (0 Hz . 300 GHz)
An das System angeschlossene Geräte müssen die relevanten Sicherheitsbestimmungen erfüllen.
© Siemens Ⓟ2008
A5E01004934-01, 04/2008 1
EG-Konformitätserklärung
Die EG-Konformitätserklärung wird gemäß den obengenannten EG- Richtlinien für die zuständigen Behörden zur Verfügung
gehalten bei:
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
A&D AS RD ST
Postfach 1963
D-92209 Amberg
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, ist jedoch keine Zusicherung von
Eigenschaften.
Sie finden die EG-Konformitätserklärung zum Download im Internet unter http://support.automation.siemens.com.
UL-Zulassung
Underwriters Laboratories Inc. nach
UL 508 (Industrial Control Equipment)
CSA C22.2 No. 142 (Process Control Equipment)
Die Zulassung wird nur bei Betrieb mit Batterie oder stationär in der Ladestation erfüllt.
FCC-Zulassung
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to
operate this equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the
measurement procedures specified in IEEE Std. 1528-2003 December 2003.
IC-Zulassung Kanada
Exposure to Radio Frequency (RF) Signals:
The wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for
exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of
comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are
based on the safety standards previously set by international standard bodies. These standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the
measurement procedures specified in IEEE Std. 1528-2003.
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
2 A5E01004934-01, 04/2008
Länderzulassungen
VORSICHT
Die folgende Übersicht informiert Sie über die möglichen Funkzulassungen in verschiedenen Ländern.
Für das Bediengerät selbst gelten nur die jeweils auf der Geräterückseite angegebenen Funkzulassungen.
Für die Produkte
Mobile Panel 277 IWLAN, Bestellnummern 6AV6 645-0DD01-0AX0 und 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, Bestellnummern 6AV6 645-0DB01-0AX0 und 6AV6 645-0DC01-0AX0
ist die Funkzulassung in folgenden Ländern vorgesehen:
Land Kennzeichnung Land Kennzeichnung
Australien Luxemburg
Belgien Niederlande
Deutschland Norwegen
Dänemark Österreich
Finnland Portugal
Frankreich Schweden
Griechenland Schweiz
Großbritannien Spanien
Irland Südafrika
Island Taiwan
Italien Tschechien
Japan Türkei
Kanada IC Ungarn
Liechtenstein Vereinigte Staaten von
Amerika
Verwendete Open Source Software
Copyright
Auf dem Bediengerät befindet sich Software, für die folgendes Copyright gilt:
Copyright (c) 1991, 1993
The Regents of the University of California. All rights reserved.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
A5E01004934-01, 04/2008 3
SIMATIC HMI
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
Product Information
Validity
This product information contains important information. This product information applies to the following HMI devices:
Mobile Panel 277 IWLAN, order numbers 6AV6 645-0DD01-0AX0 and 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, order numbers 6AV6 645-0DB01-0AX0 and 6AV6 645-0DC01-0AX0
Wireless approvals
CAUTION
The following overview shows possible wireless approvals.
The HMI device itself is certified in accordance with the wireless approvals shown on the rear panel labels.
CE approval
The products
Mobile Panel 277 IWLAN, order numbers 6AV6 645-0DD01-0AX0 and 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, order numbers 6AV6 645-0DB01-0AX0 and 6AV6 645-0DC01-0AX0
in the version put into circulation by Siemens A&D conform to the regulations of the following European directive:
99/5/EC
Directive of the European Parliament and of the Council relating to Radio Equipment and Telecommunications Terminal
Equipment and the Mutual Recognition of their Conformity.
Compatibility with the basic requirements of the guideline is verified by compliance with the following standards:
EN 60950 Safety of Information Technology Equipment
EN 301489-1 Electromagnetic Compatibility for Radio Equipment and Services
EN 301489-17 Specific requirements for broadband data transmission systems and for equipment in local high-
performance radio networks (HIPERLAN)
EN 300328 Electromagnetic Compatibility and Radio Spectrum Issues
EN 301893 Broadband radio access networks (BRAN) – 5 GHz high-performance RLAN
EN 50371 Compliance of low power electronic and electrical apparatus with the basic restrictions related to
human exposure to electromagnetic fields (10 MHz to 300 GHz)
1999/519/EC Council recommendation on the limitation of exposure of the general public to electromagnetic fields
(0 Hz to 300 GHz)
Devices connected to the system must meet the relevant safety regulations.
© Siemens Ⓟ2008
4 A5E01004934-01, 04/2008
EC Declaration of Conformity
The EC Declaration of Conformity is available for the responsible authorities according to the above-mentioned EC Directive
at the following address:
Siemens Aktiengesellschaft
Automation & Drives
A&D AS RD ST
PO Box 1963
D-92209 Amberg, Germany
This declaration certifies compliance with the directives named above, but does not guarantee any specific properties.
To download information on the EC Declaration of Conformity, go to http://support.automation.siemens.com.
UL approval
Underwriters Laboratories Inc., to
UL 508 (Industrial Control Equipment)
CSA C22.2 No. 142 (Process Control Equipment)
The approval is only valid in the case of battery operation or when stationary in the charging station.
FCC approval
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to
operate this equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the
measurement procedures specified in IEEE Std. 1528-2003 December 2003.
IC approval Canada
Exposure to Radio Frequency (RF) Signals:
The wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for
exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of
comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are
based on the safety standards previously set by international standard bodies. These standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled
environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the
measurement procedures specified in IEEE Std. 1528-2003.
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
A5E01004934-01, 04/2008 5
National approvals
CAUTION
The following overview shows possible wireless approvals in a number of different countries.
The HMI device itself is certified in accordance with the wireless approvals shown on the rear panel labels.
For the products
Mobile Panel 277 IWLAN, order numbers 6AV6 645-0DD01-0AX0 and 6AV6 645-0DE01-0AX0.
Mobile Panel 277F IWLAN, order numbers 6AV6 645-0DB01-0AX0 and 6AV6 645-0DC01-0AX0
wireless approval is intended for the following countries:
Country Identification Country Identification
Australia Luxembourg
Belgium The Netherlands
Germany Norway
Denmark Austria
Finland Portugal
France Sweden
Greece Switzerland
Great Britain Spain
Ireland South Africa
Iceland Taiwan
Italy Czech Republic
Japan Turkey
Canada IC Hungary
Liechtenstein United States of America
Open Source Software used
Copyright
The HMI device includes software to which the following copyright applies:
Copyright (c) 1991, 1993
The Regents of the University of California. All rights reserved.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Siemens AG
Automation and Drives
Postfach 48 48
90327 NÜRNBERG
Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN
6 A5E01004934-01, 04/2008

Navigation menu