Siemens MOBYU-SLGU92-0 Write-Read-Station for identification system User Manual product information sheet

Siemens AG Write-Read-Station for identification system product information sheet

product information sheet

Download: Siemens MOBYU-SLGU92-0 Write-Read-Station for identification system User Manual product information sheet
Mirror Download [FCC.gov]Siemens MOBYU-SLGU92-0 Write-Read-Station for identification system User Manual product information sheet
Document ID386973
Application IDazSWzUq+kV/ynXSfqjKh5g==
Document Descriptionproduct information sheet
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.72kB (96515 bits)
Date Submitted2004-01-07 00:00:00
Date Available2004-01-07 00:00:00
Creation Date2003-12-12 14:34:45
Producing SoftwareAFPL Ghostscript 8.0
Document Lastmod2003-12-12 14:34:45
Document TitleMicrosoft Word - Produktinfo_SLG U92_FCC_V01_00_e.doc
Document CreatorPScript5.dll Version 5.2
Document Author: VR3642

Subject to change without prior notice
MOBY U
Read/Write Device - SLG U92 with FCC
Product Sheet
Version: 01.00 of 19.09.02
A&D SE PS 3, R. Völler
Description
The SLG U92 is a read/write device with integrated antenna for long range applications. It is designed
especially for the automotive industry and industrial production plants. It uses the transmission frequency
of 2.4 GHz of the worldwide approved ISM frequency band. This permits transmission distances from just
a few centimeters to up to three meters with a very low sending power of < 50 mV/m at distance of 3 m
and high net transmission speeds of up to 8 Kbytes per second. Transmission frequency, robust modulation procedures and check routines can be selected so that electromagnetic interference can be disregarded, and error-free data transmission and integrity are still ensured. The antenna field of the SLG can
be activated and deactivated via function call or automatically with a proximity switch during communication with an MDS.
MOBY U technology stops familiar interference during UHF transmissions such as reflection, interference and over-the-horizon transmissions.The specially designed antennas provide a homogeneous
transmission field and ensure 100% detection of mobile data memories (MDSs). This makes expensive
shielding and antenna setting unnecessary.
With its mobile data memories MDS U524 and MDS U589 (up to +220° C, cyclic) and 32 Kbytes of storage space, MOBY U meets the prerequisites for a transparent solution in the automotive industry.
The SLG U92 offers inexpensive system integration via coupling to:
• Proven MOBY interface modules (ASM) for PROFIBUS-DP-V1 and SIMATIC S7
• Directly to standard PC, SICOMP or PC-PLC
Software tools such as the SIMATIC S7 functions (FC) and C library (MOBY API) for applications under
Windows 98/NT make implementation in the particular application simple.
The powerful but easy-to-use filehandler with logical file addressing which we all known from MOBY I is
directly integrated in the SLG U92 with expanded functionality. The commands MOVE and LOAD from
the MOBY I filehandler are a thing of the past. The SLG always fetches the required file management
information directly from the MDS. MOBY U can be run in three stages.
1. MOBY U can be run with standard settings, with unchanged filehandler functions and without the
MOVE and LOAD commands for existing system solutions with MOBY I.
2. Only a few expanded commands are required for changes in the standard settings and the requirements of diagnostic data.
3. Full utilization of MOBY U performance. In this stage, the commands and/or user data can also be
securely assigned to the particular MDS number.
In addition to filehandler mode, the MDSs can use direct byte addressing as with the other MOBY identification systems.
A separate service and diagnostic interface makes it simple to commission and trouble-shoot during
operation. In addition, this interface can be used with the service function "load software to SLG" in existing applications for future function expansions without having to exchange the SLG.
File: Produktinfo_SLG U92_FCC_V01_00_e.doc
1 of 1
MOBY U
Read/Write Device SLG U92
Product Sheet
Version 01.00
19.09.02
Subject to change without
prior notice
Ordering Data
Product Description
Order No.
Read/write device SLG U92 with RS 422
with FCC
Read/write device SLG U92 with RS 232
with FCC
6GT2501-0BA00
L-Price
EURO/Unit AL
on demand N
6GT2501-1BA00
on demand
ECCN
Technical Data
SLG type
Identification system
Air Interface
Transmission frequency
Bandwidth
Modulation procedure
Gross bit rate of radio channel
Check routines
Error rate
Net data rate (read/write)
Range (read/write)
Limit distance (Lg)
Max./min./standard
Location resolution
Working distance (La)
Field length/width at Lg = 1.5 m
Read/write device (SLG)
Functions
Multiple identification capability
MDS acquisition time
Object's speed
Power supply
Current consumption (send)
Operating modes
Synchronization, SLG - SLG
Minimum distance between two SLGs
Two interfaces for:
ASM 452/ASM 475 or PC
Transmission speed
Transmission protocol
Cable length, SLG - ASM
Cable length, SLG - PC
Service, 2 DIs and SLG synchronization
SLG U92
MOBY U
2.4 to 2.4835 GHz
2 x 1 MHz within 83 MHz
GMSK (BT=0.5) in downlink or DBPSK in uplink
384 kbit/sec
Forward correction with systematic block code (CRC),
ARQ procedure
< 1 read error for every 106 transactions
Approx. 8/4.8 Kbyte/sec without pileup
Approx. 4/2.4 Kbyte/sec with pileup size 2
0.15 m to 3 m
Limit distance = range limitation
3 m/0.5 m/2 m
Range limitation (adjustable in steps of 0.5 m)
Approx. 75% of limit distance
2m
MOBY filehandler (file manager)
Direct read/write
Up to 12 MDSs
> 2 sec with 12 MDSs
< 2 m/sec at La = 1.5 m and read/write < 2.5 Kbytes of
data
24 V DC (nominal value), 20 V DC to 30 V DC
Limited Power Source according EN 60950/IEC 60950
< 300 mA
SLG: Standby, search, communication
Via semaphore control over 2nd interface,
max. of 3 SLGs together
> 6 m, with synchronization directly next to each other
6-pin SLG plug connector in acc. w. EN 175201-804
RS 232 or RS 422 (SLG U92 model)
19.2 to 115.2 KBaud (depending on cable length)
3964 R
Max. of 1000 m (shielded)
Max. of 30 m/300 m (shielded)
11-pin plug connector in acc. w. EN 175201-804
File: Produktinfo_SLG U92_FCC_V01_00_e.doc
2 of 2
MOBY U
Read/Write Device SLG U92
Product Sheet
Subject to change without
prior notice
Interface for service
Transmission speed
Cable length, SLG - PC
Transmission protocol
2 DIs for proximity switch
DI 1/DI 2
DI 1 (or DI 2)
Cable length, SLG - proximity
switch
Interface for SLG synchronization
Cable length, SLG - SLG
Indicator elements
Housing
Dimensions [L x W x H]
Color/material
Mounting
Shock/oscillation in acc. w. DIN EN
60721-3-7, class 7 M3
MTBF (at +40° C)
Protection rating in acc. w. DIN EN
60529
Ambient temperature
Operation/transportation and storage
Weight, approx.
Antenna
Antenna efficiency
Receiving sensitivity
Gain
Emission towards back
Opening angle
Polarization
Certifications
Version 01.00
19.09.02
RS 232
19.2 KBaud
Max. of 30 m
Terminal, ASCII characters
Proximity switch for triggering antenna field, on/off
Proximity switch for continuous antenna field, on
Max. of 50 m
Max. of 30 m
2 LEDs
290 x 135 x 42 (without plug)
Anthracite/plastic PA 12 GF 25
4 M6 screws
30 g/1.5 g
0.4 x 10 hours
IP 65
-25° C to +70° C/-40° C to +85° C
800 g
Integrated in SLG
< 50 mV/m at distance of 3 m/< 0.5 W/cm2 (at distance
of 1 m)
-95 dBm
5 dBi
-20 dB front/back
Approx. 90° horizontal/vertical
Circular
RF:
I-ETS 330440+C1:1997
SAR: 99/519/EG
Safety: EN 60950:2000
EMC: EN 301489-01:2000
EN 301489-03:2000
ENV 50204:1995
FCC Part 15C
CULUS
Safe for pacemakers
Field Data
Standard Minimum
Limit distance (Sg), approx.
Working distance (Sa)
Transmission window at Sa
Length/width
2.0 m
1.4 m
0.50 m
0.35 m
Maximum
3.0 m
2.1 m
2.0 m
0.70 m
2.1 m
Over-the-horizon transmissions can be
actively limited (in 0.5 m steps from 0.5
m to 3.5 m) by SLG.
The field data apply to reading and writing the MDS with SLG U92 with FCC certification.
File: Produktinfo_SLG U92_FCC_V01_00_e.doc
3 of 3
MOBY U
Read/Write Device SLG U92
Product Sheet
Subject to change without
prior notice
Version 01.00
19.09.02
Dimensional Drawing - SLG U92
42
11-pin plug connector in
acc. w. EN 175201-804
for service interface,
proximity switch and
synchronization
6-pin SLG plug connector
in acc. w. EN 175201-804
for ASM/PC
RS 422 or RS 232
File: Produktinfo_SLG U92_FCC_V01_00_e.doc
4 of 4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Producer                        : AFPL Ghostscript 8.0
Create Date                     : 2003:12:12 14:34:45
Modify Date                     : 2003:12:12 14:34:45
Title                           : Microsoft Word - Produktinfo_SLG U92_FCC_V01_00_e.doc
Creator                         : PScript5.dll Version 5.2
Author                          : VR3642
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NXWMOBYU-SLGU92-0

Navigation menu