Siemens RF210R RFID Reader User Manual Technical Data RF210R Short Form

Siemens AG RFID Reader Technical Data RF210R Short Form

Contents

user manual I

Technical Data RF210R – Short Form  Remarks: The RF210R manual does not yet exist, even not in German language. The RF210R manual, once completed, will contain detailed information about field-data, range for certain tags and information about how to implement the RF210R in a production site with communication modules. This detailed information may not be much relevant for RF210R FCC approval. Below given are short system overview and technical data which are required in order to run the RF210R for testing and to check the reader’s function.     RF200 System overview SIMATIC RF200 is an inductive identification system, based on the standard ISO 15693, which was specially designed for industrial production for controlling and optimization material flow. Contrary to SIMATIC RF300, SIMATIC RF200 is designed for RFID applications for lower demands on performance (data volume, data transfer speed, diagnostics). SIMATIC RF200 is a low-price RFID system.   Explanation of Technical terms  Component  Description Communications Modules  Integration of an RFID Identification system is achieved by a communications module. Reader  The reader achieves the communication with the tag and provides the tag with energy by the reader’s magnetic field. The reader also interfaces to various modules (i.e. SIMATIC S7 via ASM 475). Tag  The RFID-tag stores all data relevant for production and is used as a substitute for optical barcode-tags.  This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
 Overview of System Components compatible with RF210R  System components   Communications modules  • ASM 456 • ASM 475 (S7 300/ ET 200M) • RF160C • RF170C • RF180C • RF182C Tags  • MDS D124 • MDS D160 • MDS D324 • MDS D421 • MDS D422 • MDS D424 • MDS D428 • MDS D460  Technical Data RF210R (short form)  Inductive interface (magnetic field) to transponder (tag). Carrier frequency for energy / data  13,56 MHz Antenna  Integrated loop RF output power (RF power into antenna)  180mW (22.8dBm) into 50Ω Interface to communications module  RS422 Baud rate  19200, 57600, 115200 Baud Functions  Initialize tag, read tag, write on tag, get status data, antenna on/off, read tag serial number DC-Voltage (nominal)  24 V DC Display elements  One pair of 2-color-LEDs (operating voltage, presence, error) Connector  M12 (8-pin.) ROHS conformity  ROHS according to EU 2002/95/EG Housing • Dimensions • Color • Material • Coating Metal Sleeve • Length: 83mm (3.3in); Diameter: 18mm (0.71in) • silver • CuZn40 Pb2 F43 • Ni4p**SN15 305 Fixing  2 Hex nuts, 18mm  Degree of protection to EN 60529  IP67 Temperature Range (operating)  -25°C … +70°C Weight without hex nuts / with hex nuts  50g (0.11 lbs) / 65g (0.14 lbs) Current consumption  40mA DC Power consumption  1.0 Watts  Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
 Pin assignment RF210R (RS422 interface)  M12 connector (male)  Pin No. M12 plug Pin 1  +24V 2  -TX 3  0V (GND) 4  +TX 5  +RX 6  -RX 7  Not used (free)   8  PE / shield    LED indicator (display elements) RF210R  LED colour  Meaning Flashing  Operating voltage available, reader NOT initialized Green Permanently on  Operating voltage available. Reader initialized. Yellow  Tag in field (tag presence) Red (flashing)  Error according to error code table. Red (permanently on)  Fatal error   RF210R housing and dimensions RF210R total length: 83mm (3.27in); sleeve diameter: 18mm (0.71in).

Navigation menu