Siemens RF380R Tag Reader User Manual SIMATIC Sensors RFID systems SIMATIC RF300

Siemens AG Tag Reader SIMATIC Sensors RFID systems SIMATIC RF300

User Manual Part II

Readers 5.3 RF310R with RS422 interface SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 93 5.3 RF310R with RS422 interface 5.3.1 Features Reader RF310R Features Structure ① RS422 interface ② Status display Field of application Identification tasks on small assembly lines in harsh industrial environments Read/write distance to transponder Max. 30 mm  Data transmission rate • Read: approx. 3100 byte/s • Write: approx. 3100 byte/s 5.3.2 Pin assignment of RF310R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive 7 Free  8 Earth (shield)
Readers 5.3 RF310R with RS422 interface SIMATIC RF300 94 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.3.3 Display elements of the RF310R reader with RS422 interface Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) In the operating state "Without presence", the lighting duration may be very short. 5.3.4 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.3.5 Metal-free area The RF310R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. DDDD6,0$7,&5)5 Figure 5-4 Metal-free area for RF310R To avoid any impact on the field data, the distance a should be ≥ 20 mm.
Readers 5.3 RF310R with RS422 interface SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 95 5.3.6 Minimum distance between RF310R readers ุPP0LQLPXPGLVWDQFHEHWZHHQ5)5DQG5)5' ''5)56,0$7,&5)56,0$7,&5)56,0$7,& Figure 5-5 Minimum distance between RF310R readers
Readers 5.3 RF310R with RS422 interface SIMATIC RF300 96 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.3.7 Technical specifications of the RF310R reader with RS422 interface Table 5-3 Technical specifications of the RF310R reader with RS422 interface Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna Integrated Interface to communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length between reader and communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See RF310R field data Minimum distance between two RF310R readers ≥ 400 mm Maximum data transfer rate from reader to transponder (Tag) Reading Writing Approx. 3100 byte/s Approx. 3100 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 55 x 75 x 30 (without M12 device connector) Anthracite Plastic PA 12 Fixing 4 x M5 screws Ambient temperature during operations during transport and storage -25 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60 721-3-7 Class 7 M2 Vibration to EN 60 721-3-7 Class 7 M2 IP67 50 g 20 g Weight Approx. 200 g MTBF (Mean Time Between Failures) in years 169,9 Approvals Radio to R&TTE guidelines EN 300 330, EN 301489, CE, FCC, UL/CSA Current consumption typ. 40 mA
Readers 5.3 RF310R with RS422 interface SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 97 5.3.8 FCC information Siemens SIMATIC RF310R with RS422 interface FCC ID: NXW-RF310R This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5.3.9 Ordering data for RF310R with RS422 interface RF310R Order No. With RS422 interface (3964R) IP 67, -25 °C to +70 °C, 55 x 75 x 30 (L x W x H in mm), with integrated antenna, max. limit distance 30 mm (depending on transponder) 6GT2801-1AA10
Readers 5.3 RF310R with RS422 interface SIMATIC RF300 98 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.3.10 Dimension drawing  6,0$7,&5)5 Figure 5-6 Dimension drawing for RF310R Dimensions in mm
Readers 5.4 RF340R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 99 5.4 RF340R 5.4.1 Features Reader RF340R Features Design ① RS422 interface ② Status display Area of application Identification tasks on assembly lines in harsh industrial environments Read/write distance to transponder max. 60 mm   Data transmission rate • Read: approx. 3,100 byte/s • Write: approx. 3,100 byte/s 5.4.2 Pin assignment of RF340R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive 7 Free  8 Earth (shield)
Readers 5.4 RF340R SIMATIC RF300 100 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.4.3 Display elements of the RF340R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) In the operating state "Without presence", the lighting duration may be very short. 5.4.4 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.4.5 Metal-free area The RF340R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. 6,0$7,&DDDD5)5 Figure 5-7 Metal-free area for RF340R To avoid any impact on the field data, the distance a should be ≥ 20 mm.
Readers 5.4 RF340R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 101 5.4.6 Minimum distance between RF340R readers ุPP0LQLPXPGLVWDQFHIURP5)5WR5)5' ''5)55)5 5)5 Figure 5-8 Minimum distance between RF340R readers
Readers 5.4 RF340R SIMATIC RF300 102 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.4.7 Technical data of the RF340R reader Table 5-4 Technical specifications of the RF340R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna Integrated Interface to communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length between reader and communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See RF340R field data Minimum distance between two RF340R readers ≥ 500 mm Maximum data transfer rate reader - transponder (tag) Reading Writing Approx. 3100 byte/s Approx. 3100 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 75 x 75 x 40 (without M12 device connector) Anthracite Plastic PA 12 Fixing 2 x M5 screws Ambient temperature during operations during transport and storage -25 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60 721-3-7 Class 7 M2 Vibration to EN 60 721-3-7 Class 7 M2 IP 67 50 g 20 g Weight Approx. 250 g MTBF (Mean Time Between Failures) in years 140,3 Approvals Radio to R&TTE guidelines EN 300 330, EN 301489, CE, FCC, UL/CSA Current consumption typ. 100 mA
Readers 5.4 RF340R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 103 5.4.8 FCC information Siemens SIMATIC RF340R FCC ID: NXW-RF340R This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5.4.9 Ordering data for RF340R Product description Order No. Reader RF340R With RS422 interface (3964R) IP67; -25 °C to +70 C, dimensions 75 x 91 x 41 (L x W x H in mm); with integrated antenna; max. limit distance 65 mm (depending on transponder) 6GT2801-2AA10
Readers 5.4 RF340R SIMATIC RF300 104 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.4.10 Dimension drawing 6,0$7,&5)5 Figure 5-9 Dimension drawing for RF340R Dimensions in mm
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 105 5.5 RF350R 5.5.1 Features Reader RF350R Features Design ① Antenna connection ② RS422 interface ③ Status display Area of application Identification tasks in assembly lines in harsh industrial environments; for external antennas (ANT 1, ANT 18, ANT 30) Read/write distance to transponder Max. 60 mm  Data transmission rate • Read: approx. 3,100 byte/s • Write: approx. 3,100 byte/s 5.5.2 Pin assignment of RF350R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive 7 Free  8 Earth (shield)
Readers 5.5 RF350R SIMATIC RF300 106 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.3 Display elements of the RF350R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) In the operating state "Without presence", the lighting duration may be very short. 5.5.4 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.5.5 Metal-free area The RF350R reader does not have an internal antenna. Operation is not affected by mounting on metal or flush-mounting in metal. For information about the metal-free area required by the external antennas, refer to the corresponding section of the chapter Antennas (Page 110).
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 107 5.5.6 Technical data of the RF350R reader Table 5-5 Technical specifications of the RF350R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna External, plug-in MOBY E antennas ANT 1, ANT 18 or ANT 30 Interface to communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115 baud Cable length between reader and communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See field data Minimum distance between two antennas See field data Maximum data transfer rate reader - transponder (tag) Reading Writing Approx. 3100 byte/s Approx. 3100 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin); M8 (4-pin) for antenna Enclosure Dimensions (in mm) Color Material 75 x 75 x 40 (without M12 device connector) Anthracite Plastic PA 12 Fixing 2 x M5 screws Ambient temperature during operations during transport and storage -25 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60 721-3-7 Class 7 M2 Vibration to EN 60 721-3-7 Class 7 M2 IP65 50 g 20 g Weight Approx. 400 g MTBF (Mean Time Between Failures) in years 109 Approvals Radio to R&TTE guidelines EN 300 330, EN 301489, CE, FCC, UL/CSA Current consumption typ. 100 mA
Readers 5.5 RF350R SIMATIC RF300 108 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.7 FCC information Siemens SIMATIC RF350R FCC ID: NXW-RF350R This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5.5.8 Ordering data for RF350R Product description Order No. Reader RF350R With RS422 interface (3964R) IP 65; -25 °C to +70 °C, dimensions 75 x 96 x 41 (L x W x H in mm); for plug-in antennas from the MOBY E product range; max. limit distance 65 mm (depending on transponder) 6GT2801-4AA10
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 109 5.5.9 Dimension drawing 6,0$7,&5)5 Figure 5-10 RF350R dimension drawing Dimensions in mm
Readers 5.5 RF350R SIMATIC RF300 110 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.10 Antennas 5.5.10.1 Features You can use the following plug-in antennas from the MOBY E product spectrum for the RF350R reader: Antenna Product photo Limit distance Sg in mm 1) Dimensions (L x B x H) in mm Suitable for dynamic operation MOBY E ANT 1 to 60 75 x 75 x 20 Yes MOBY E ANT 18 to 13 Ø M18 x 50 no MOBY E ANT 30 to 22 Ø M30 x 58 no 1) depending on the transponder used ANT 1 The ANT 1 is an antenna in the mid performance range and can be used to the customer's advantage in production and assembly lines due to its manageable housing shape. The antenna dimensions make it possible to read/write large quantities of data dynamically from/to the tag during operation. The antenna cable can be connected at the reader end. ANT 18 The ANT 18 is designed for use in small assembly lines. Due to its small, compact construction, the antenna can be easily positioned for any application using two plastic nuts (included in the package). The antenna cable can be connected at the reader end. With the RF320T and RF340T tags, communication with the data storage unit is only possible in static mode.
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 111 ANT 30 The ANT 30 is designed for use in small assembly lines. In comparison to ANT 18, the maximum write/read distance is approximately 60 % larger. Due to its compact construction, the antenna can be easily positioned for any application using two plastic nuts (included in the package). The antenna cable can be connected at the reader end. With the RF320T, RF340T and RF350T tags, communication with the data storage unit is only possible in static mode.
Readers 5.5 RF350R SIMATIC RF300 112 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.10.2 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.5.10.3 Metal-free area The antennas ANT1, ANT18 and ANT30 can be flush-mounted on metal. Please allow for a possible reduction in the field data values. 0HWDOIUHHDUHDIRUIOXVKPRXQWLQJQRWDPHWDOOLFEDVH0HWDOa = 40 mmh > 20 mmaaaah > 20 mm Figure 5-11 Metal-free area for ANT 1 1RWH,IWKHPHWDOIUHHDUHDLVQRWREVHUYHGWKHOLPLWDQGRSHUDWLQJGLVWDQFHVDUHUHGXFHG0HWDOIUHHDUHDIRUIOXVKPRXQWLQJDED PPE PP$1702%<($17D Figure 5-12 Metal-free area for ANT 18
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 113 DED PPE PPD02%<($173ODQYLHZ6LGHYLHZ Figure 5-13 Metal-free area for ANT 30
Readers 5.5 RF350R SIMATIC RF300 114 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.10.4 Minimum distance between antennas 7KHUHDGHUHOHFWURQLFVFDQEHPRXQWHGGLUHFWO\DORQJVLGHHDFKRWKHU$17E'PPD!B$17$17'PP!B'DE' Figure 5-14 Minimum distance for ANT 1 'DุPP'D'D Figure 5-15 Minimum distance for ANT 18
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 115 'D!PP'D'D Figure 5-16 Minimum distance for ANT 30
Readers 5.5 RF350R SIMATIC RF300 116 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.5.10.5 Technical data for antennas Table 5-6 Technical data for antennas ANT1, ANT18 and ANT30 Antenna ANT1 ANT18 ANT30 Read/write distance antenna to transponder (Sg) max 100 mm 15 mm 24 mm Enclosure dimensions in mm 75 x 75 x 20 (L x W x H) M18 x 1.0 x 55 (Ø x thread x L) M30 x 1.5 x 58 (Ø x thread x L) Color Anthracite Pale turquoise Material Plastic PA 12 Plastic Krastin Plug connection 4-pin (pins on antenna side) Antenna cable lengths 3 m Degree of protection according to EN 60529 IP 67 IP 67 (at the front) Shock-resistant acc. to EN 60721-3-7, Class 7M2 Vibration-resistant to EN 60721-3-7, Class 7M2 50 g 1) 20 g ( 3 to 500 Hz) 1) Attachment of the antenna 2 x M5 screws 2 plastic nuts M18 x 1.0 2 plastic nuts M30 x 1.5 Ambient temperature • During operation • Storage and transport • -25 °C to +70 °C • -40 °C to +85 °C MTBF (at +40 °C) 2,5 x 105 hours Approx. weight 80 g 120 g 150 g 1) Warning: The values for shock and vibration are maximum values and must not be applied continuously. 5.5.10.6 Ordering data for antennas Product description Order No. MOBY E, ANT 1 6GT2398-1CB00 MOBY E, ANT 18 6GT2398-1CA00 MOBY E, ANT 30 6GT2398-1CD00
Readers 5.5 RF350R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 117 5.5.10.7 Dimension drawings for antennas &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG20 mm Figure 5-17 Dimension drawing for ANT 1 Dimensions in mm &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG$QWHQQDKHDG6LGHYLHZRIDQWHQQDKHDG$QWHQQDHQG)LQHWKUHDGSLWFKPP002%<($17 Figure 5-18 Dimension drawing for ANT 18 Dimensions in mm &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG$QWHQQDKHDG6LGHYLHZRIDQWHQQDKHDG$QWHQQDHQG)LQHWKUHDGSLWFKPP0$1702%<( Figure 5-19 Dimension drawing for ANT 30 Dimensions in mm
Readers 5.6 RF380R SIMATIC RF300 118 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.6 RF380R 5.6.1 Features Reader RF350R Features Structure ① RS232 or RS422 interface ② Status display Field of application Identification tasks on assembly lines in harsh industrial environments Read/write distance to transponder Max. 150 mm  Data transmission rate • Read: approx. 3,100 byte/s • Write: approx. 3,100 byte/s 5.6.2 Pin assignment of RF380R RS232/RS422 interface You can connect the RF380R reader to a higher-level system via the internal RS422 interface or via the RS232 interface. After connection, the interface module automatically detects which interface has been used. Note correct assignment of the pins here: Assignment Pin Pin Device end 8-pin M12 RS232 RS422 1 + 24 V + 24 V 2 RXD - Transmit 3 0 V 0 V 4 TXD + Transmit 5 NC + Receive 6 NC - Receive 7 not used not used  8 Earth (shield) Earth (shield)
Readers 5.6 RF380R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 119 5.6.3 Display elements of the RF380R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) In the operating state "Without presence", the lighting duration may be very short. 5.6.4 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.6.5 Metal-free area The RF380R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. DDDD6,0$7,&5)5 Figure 5-20 Metal-free area for RF380R To avoid any impact on the field data, the distance a should be ≥ 20 mm.
Readers 5.6 RF380R SIMATIC RF300 120 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.6.6 Minimum distance between RF380R readers ุPP0LQLPXPGLVWDQFHEHWZHHQ5)5DQG5)5' '' Figure 5-21 Minimum distance between RF380R readers
Readers 5.6 RF380R SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 121 5.6.7 Technical specifications of the RF380R reader Table 5-7 Technical specifications of the RF380R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna integrated Interface to communication module RS232 or RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length between reader and communication module RS422 data cable length: max. 100 m RS232 data cable length: Max. 30 m Read/write distances of reader See RF380R field data Minimum distance between two RF380R readers ≥ 500 mm Maximum data transfer rate reader - transponder (tag) Reading Writing Approx. 3100 byte/s Approx. 3100 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Voltage supply 24 V DC Indicators 2-color LED (operating voltage, presence, error) Connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 160 x 80 x 40 (without M12 plug connector) Anthracite Plastic PA 12 Fixing 4 x M5 screws Ambient temperature during operations during transport and storage -10 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60 721-3-7 Class 7 M2 Vibration to EN 60 721-3-7 Class 7 M2 IP67 50 g 20 g Weight Approx. 400 g MTBF (Mean Time Between Failures) in years 109 years Approvals Radio to R&TTE guidelines EN 300 330, EN 301489, CE Current consumption typ. 160 mA
Readers Reader RF380R With RS422 interface (3964R) IP67; -10 °C to +60 C, dimensions 160 x 96 x 40 (L x W x H in mm); with integrated antenna; max. limit distance 150 mm (depending on transponder) 6GT2801-3AA10 5.6.10 Dimension drawing  6,0$7,&5)5 Figure 5-22 Dimension drawing RF380R Dimensions in mm 5.6 RF380R SIMATIC RF300 122 System Manual, 09/2007, J31069 D0166-U001-A5-7618 5.6.8 FCC information Siemens SIMATIC RF380R FCC approval pending Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Product description Order No.
SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 123 Transponders 66.1 Overview Transponders consist predominantly of logic, FRAM and/or EEPROM. If a transponder moves into the transmission window of the reader, the necessary power for all of the circuit components is generated and monitored by the power supply unit. The pulse-coded information is prepared in such a way that it can be processed further as pure digital signals. The handling of data, including check routines, is performed by the logic, which also manages the various memories.
Transponders 6.2 RF320T SIMATIC RF300 124 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.2 RF320T 6.2.1 Features Transponder RF320T Features Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) User data area (20 bytes) Read/write range See Section Field data for transponders, readers and antennas (Page 37) Mounting on metal Not possible Recommended distance from metal ≥ 20 mm
Transponders 6.2 RF320T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 125 6.2.2 Metal-free area Mounting of RF320T on metal Direct mounting of the RF320T on metal is not allowed. The following figures show the minimum distance between the RF320T and metal: 1RQPHWDO0HWDOK!PP'DWDPHPRU\ Figure 6-1 Mounting of an RF320T on metal with spacer Flush-mounting of RF320T in metal D!PPK!PP'DWDPHPRU\ 0HWDO1RQPHWDO Figure 6-2 Flush-mounting of RF320T in metal with spacer At lower values, the field data change significantly, resulting in a reduced range.
Transponders 6.2 RF320T SIMATIC RF300 126 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.2.3 Technical data Table 6-1 Technical data for RF320T Memory size 20 bytes EEPROM (r/w), 4 bytes UID (ro) Memory organization Byte-oriented access, write protection possible in 4-byte blocks MTBF (Mean Time Between Failures) in years 1871 Read cycles Unlimited Write cycles, min. 50 000 at ≤ 40 °C, typical > 100 000 Data retention time > 10 years (at < +40 °C) Write/read distance dependent on the reader used (see field data) Energy source Inductive power transmission Shock/vibration-resistant to EN 60721-3-7, Class 7 M3 100 g/20 g Torsion and bending load not permissible Fixing Adhesive/M3 screws Recommended spacing from metal > 20 mm Degree of protection to EN 60529 • IP67/IPX9K Housing • Dimensions • Color/material Button • Ø 27 mm x 4 mm • Black/epoxy resin Ambient temperature • Operation • Transport and storage • -25 to +85 °C • -40 to +125 °C Weight Approx. 5 g Note All the technical data listed are typical data and are applicable for an ambient temperature of between 0 C and +50°C and a metal-free environment. 6.2.4 Ordering data Transponder RF320T Order number: Transponder RF320T, button, 20 byte EEPROM, IP 67, -25 °C to +85 °C, d = 27 mm x 4 mm 6GT2800-1CA00
Transponders 6.2 RF320T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 127 6.2.5 Dimension drawing  Figure 6-3 RF320T dimension drawing Dimensions in mm
Transponders 6.3 RF340T SIMATIC RF300 128 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.3 RF340T 6.3.1 Features Transponder RF340T Features Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (8 KB) OTP 1) memory (20 bytes) Read/write range See Section Field data for transponders, readers and antennas (Page 37) Mounting on metal Direct mounting on metal is possible. 1) OTP: One Time Programmable
Transponders 6.3 RF340T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 129 6.3.2 Metal-free area Direct mounting of the RF340T on metal is permitted. Mounting of RF340T on metal 0HWDO Figure 6-4 Mounting of RF340T on metal Flush-mounting of RF340T in metal: DD0HWDO Figure 6-5 Flush-mounting of RF340T in metal The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
Transponders 6.3 RF340T SIMATIC RF300 130 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.3.3 Technical specifications Table 6-2 Technical specifications for RF340T Memory size 8 KB Memory organization Blocks of 8 bits / 1 byte Memory configuration • Serial number (UID) • Application memory • OPT memory • 4-byte (fixed code) • 8189 bytes r/w • 20-byte OTP 1) memory Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1201 Write cycles, at +40°C Virtually unlimited (>1010) Read cycles Virtually unlimited (>1010) Transmission rate • Read • Write with RS422 reader: Approx. 0.3 ms / byte approx. 0.3 ms / byte with IQ-Sense reader: Approx. 20 ms / byte approx. 25 ms / byte Data retention > 10 years Read/write distance dependent on the reader used (see field data) Multitag capability max. 4 transponders Recommended spacing from metal can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 Shock to EN 60721-3-7 Vibration to EN 60721-3-7 Torsion and bending load IP68/IPX9K 50 g 20 g Not permitted permanently Housing dimensions Color Material Fixing 48 x 25 x 15 mm (L x W x H) Anthracite PA12 2 screws (M3) Ambient temperature • During operation • Storage and transport -25°C to +85°C -40°C to +85°C Weight Approx. 25 g 1) OTP: (One Time Programmable) 6.3.4 Ordering data Transponder RF340T Order No. Transponder RF340T, 8 KB FRAM, IP 68, -25 °C to +85 °C, 48 x 25 x 15 mm (L x W x H) 6GT2800-4BB00
Transponders 6.3 RF340T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 131 6.3.5 Dimension drawing 6,(0(166,0$7,&5)7 Figure 6-6 RF340T dimension drawing Dimensions in mm
Transponders 6.4 RF350T SIMATIC RF300 132 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.4 RF350T 6.4.1 Features Transponder RF350T Features Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (32 KB) OTP 1) memory (20 bytes) Read/write range See Section Field data for transponders, readers and antennas (Page 37) Mounting on metal Direct mounting on metal is possible. 1) OTP: One Time Programmable
Transponders 6.4 RF350T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 133 6.4.2 Metal-free area Direct mounting of the RF350T on metal is permitted. Mounting of RF350T on metal Figure 6-7 Mounting of RF350T on metal Flush-mounting of RF350T in metal: Figure 6-8 RF350T flush-mounted in metal The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
Transponders 6.4 RF350T SIMATIC RF300 134 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.4.3 Technical data Table 6-3 Technical specifications for RF350T Memory size 32 KB Memory organization Blocks of 8 bits / 1 byte Memory configuration • Serial number (UID) • Application memory • OTP 1) memory • 4-byte (fixed code) • 32765 bytes r/w • 20 bytes Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1201 Write cycles, at +40°C Virtually unlimited (>1010) Read cycles Virtually unlimited (>1010) Transmission rate • Reading • Writing with RS422 reader: Approx. 0.3 ms / byte approx. 0.3 ms / byte with IQ-Sense reader: Approx. 20 ms / byte approx. 25 ms / byte Data retention > 10 years Read/write distance dependent on the reader used (see field data) Multitag capability max. 4 transponders Recommended spacing from metal can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 Shock to EN 60721-3-7 Vibration to EN 60721-3-7 Torsion and bending load IP68 50 g 20 g Not permitted permanently Enclosure dimensions Color Material Fixing 50 x 50 x 20 mm (L x W x H) Anthracite PA12 2 screws M4 Ambient temperature • During operation • During transport and storage -25 °C to +85 °C -40 °C to +85 °C Weight Approx. 25 g 1) OTP: (One Time Programmable) 6.4.4 Ordering data RF350T Order number: 32 KB FRAM (read/write) + 4 byte EEPROM (read only), IP 68, -25 °C to +85 °C, dimensions 50 x 50 x 20 (LxWxH in mm) 6GT2800-5BD00
Transponders 6.4 RF350T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 135 6.4.5 Dimension drawing 7KHWUDQVSRQGHUFDQEHPRXQWHGDVVKRZQZLWKWKHIL[LQJIUDPH,QVWDOODWLRQGLDJUDP)L[LQJIUDPH7UDQVSRQGHU Figure 6-9 RF350T dimension drawing Dimensions in mm
Transponders 6.5 RF360T SIMATIC RF300 136 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.5 RF360T 6.5.1 Features Transponder RF360T Features Area of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (8 KB) OTP 1) memory (20 bytes) Read/write range Refer to SectionField data for transponders, readers and antennas (Page 37) Mounting on metal Not possible; recommended distance from metal ≥ 20 mm 1) OTP: One Time Programmable
Transponders 6.5 RF360T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 137 6.5.2 Metal-free area Direct mounting of the RF360T on metal is not allowed. A distance ≥ 20 mm is recommended. This can be achieved using the spacer 6GT2190-0AA00 in combination with the fixing pocket 6GT2190-0AB00. Mounting of RF360T on metal K0HWDO1RQPHWDO'DWDVWRUDJHXQLW Figure 6-10 Mounting of RF360T with spacer The standard value for h is ≥ 20 mm. Flush-mounting of RF360T in metal: 1RQPHWDO0HWDODD'DWDVWRUDJHXQLWK Figure 6-11 Flush-mounting of RF360T with spacer The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
Transponders 6.5 RF360T SIMATIC RF300 138 System Manual, 09/2007, J31069 D0166-U001-A5-7618 Dimensions of spacer and fixing pocket for RF360T +ROGLQJFOLS7KHVSDFHUFDQEHGLUHFWO\PRXQWHGRQPHWDO,QFRPELQDWLRQZLWKWKHIL[LQJSRFNHWDQRQPHWDOGLVWDQFHRIPPUHVXOWVEHWZHHQWKHWUDQVSRQGHUDQGPHWDO0RXQWLQJ:LWKRUVFUHZV0:LWKUXEEHUVRQWKHKROGLQJFOLSVHJRQPHVKER[HV:LWKFDEOHWLHVRQWKHKROGLQJFOLSVHJRQPHVKER[HV(DUV+ROGLQJNQREV'LPHQVLRQVNHWFK6SDFHU*7$$ )L[LQJSRFNHW*7$%7KHIL[LQJSRFNHWLVDWWDFKHGWRDQRQPHWDOEDVHE\WKHHDUV7KLVFDQEHDFKLHYHGZLWK6FUHZVLQWKHKROHVSURYLGHG5LYHWVLQWKHKROHVSURYLGHG1DLOVWKURXJKWKHKROHV7DFNVWKURXJKWKHSODVWLFRIWKHHDUV3XVKLQJLQWRWKHVSDFHUV7KHHDUVFDQEHPRYHGWKURXJKXSWRr7KHWUDQVSRQGHULVLQVHUWHGLQWRWKHIL[LQJSRFNHW/RFNLQJLVYLDWKHKROGLQJNQREVLQWKHIL[LQJSRFNHW 'DWDPHPRU\6SDFHU)L[LQJSRFNHW7KHWUDQVSRQGHULVLQVHUWHGLQWRWKHIL[LQJSRFNHW7KHHDUVDUHPRYHGE\rDQGLQVHUWHGLQWRWKHVSDFHU7KHIL[LQJSRFNHWPXVWEHDOLJQHGVXFKWKDWLWFRYHUVWKHWUDQVSRQGHUVHH)LJXUH/RFNLQJLVDXWRPDWLF7UDQVSRQGHUZLWKIL[LQJSRFNHW 7UDQVSRQGHUZLWKIL[LQJSRFNHWDQGVSDFHUFRQQHFWHGWRJHWKHU0DWHULDO3$5HDVVHPEO\LQVWUXFWLRQV6,(0(16 Figure 6-12 Dimensions of spacer and fixing pocket for RF360T
Transponders 6.5 RF360T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 139 6.5.3 Technical data Table 6-4 Technical specifications for RF360T Memory size 8 KB Memory organization Blocks of 8 bits / 1 byte Memory configuration • Serial number (UID) • Application memory • OTP 1) memory • 4-byte (fixed code) • 8189 bytes r/w • 20 bytes Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1201 Write cycles, at +40°C Virtually unlimited (>1010) Read cycles Virtually unlimited (>1010) Transmission rate • Reading • Writing with RS422 reader: Approx. 0.3 ms / byte approx. 0.3 ms / byte with IQ-Sense reader: Approx. 20 ms / byte approx. 25 ms / byte Data retention > 10 years Read/write distance dependent on the reader used (see field data) Multitag capability max. 4 transponders Recommended spacing from metal ≥ 20 mm; e.g. using spacer 6GT2190-0AA00 in conjunction with fixing pocket 6GT2190-0AB00 Power supply Inductive, without battery Degree of protection to EN 60529 Shock to EN 60721-3-7 Vibration to EN 60721-3-7 Torsion and bending load IP67 50 g 20 g Not permitted permanently Enclosure dimensions Color Material Fixing 85.8 x 54.8 x 2.5 mm (L x W x H) Anthracite PA12 2 screws (M3) or with fixing pocket 6GT2190-0AB00 Ambient temperature • During operation • During transport and storage -25°C to +75°C -40°C to +85°C Weight Approx. 25 g 1) OTP: (One Time Programmable) 6.5.4 Ordering data RF360T Order number 8 KB FRAM (read/write) + 4 byte EEPROM (read only), IP 67, -25 °C to +75 °C, dimensions 85.8 x 54.8 x 2.5 (LxWxH in mm) 6GT2800-4AC00
Transponders 6.5 RF360T SIMATIC RF300 140 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.5.5 Dimension drawing 5 Figure 6-13 RF360T dimension drawing Dimensions in mm
Transponders 6.6 RF370T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 141 6.6 RF370T 6.6.1 Features The SIMATIC RF370T transponder is a passive (i.e. battery-free) data carrier in a square type of construction. SIMATIC RF370T transponder Features Area of application Identification tasks on assembly lines in harsh industrial environments, suitable for larger ranges, e.g. automotive industry Memory Read-only area: 4 byte UID write/read memory: 32/64 KB OTP 1) memory: 20 bytes Write/read range Refer to SectionField data for transponders, readers and antennas (Page 37) Assembly Direct assembly on metal or flush-mounting is possible (with two M5 screws) Degree of protection IP68 IPx9K High resistance to mineral oils, lubricants and cleaning agents 1) OTP: One Time Programmable; single write
Transponders 6.6 RF370T SIMATIC RF300 142 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.6.2 Metal-free area Direct mounting of the RF370T on metal is permitted. Mounting of RF370T on metal Figure 6-14 Mounting of RF370T on metal Flush-mounting of RF370T in metal: DD Figure 6-15 RF370T flush-mounted in metal The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
Transponders 6.6 RF370T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 143 6.6.3 Mounting instructions It is essential that you observe the instructions in the Section Installation guidelines (Page 54). Properties Description Type of installation Screw fixing (two M5 screws) Tightening torque < 1.2 Nm (at room temperature)
Transponders 6.6 RF370T SIMATIC RF300 144 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.6.4 Technical specifications 6.6.4.1 Technical data for RF370T with 32 KB FRAM Table 6-5 Technical specifications for RF370T with 32 KB FRAM Characteristic Description Memory size 32KB Memory organization Blocks of 8 bits / 1 byte Serial number 4-byte (fixed code) Application memory 32765 bytes r/w Memory configuration OTP 1) memory 20 bytes Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1189 Write cycles, at +40°C Virtually unlimited (>1010) Read cycles Practically unlimited (>1010) Read approx. 0.3 ms/byte Transmission rate Write approx. 0.3 ms/byte Data retention in years > 10 Read/write distance dependent on the reader used (see field data) Multitag capability max. 4 transponders Recommended spacing from metal can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 IPx9K Shock resistant to EN 60721-3-7 50 g Vibration resistant to EN 60721-3-7 20 g Torsion and bending load Not permissible continuously Housing dimensions 75 x 75 x 40 mm (L x W x H) Color Anthracite Material PA12 Fixing Two M5 screws During operation -25 °C to +85 °C Ambient temperature During transport and storage -40°C to +85°C Weight Approx. 200 g 1) OTP: One Time Programmable
Transponders 6.6 RF370T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 145 6.6.4.2 Technical data for RF370T with 64 KB FRAM Table 6-6 Technical specifications for RF370T with 64 KB FRAM Characteristic Description Memory size 64 KB Memory organization Blocks of 8 bits / 1 byte Serial number 4-byte (fixed code) Application memory 65276 bytes r/w Memory configuration OTP 1) memory 20 bytes Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1189 Write cycles, at +40°C Practically unlimited (>1010) Read cycles Practically unlimited (>1010) Read approx. 0.3 ms/byte Transmission rate Write approx. 0.3 ms/byte Data retention in years > 10 Read/write distance dependent on the reader used (see field data) Multitag capability max. 4 transponders Recommended spacing from metal Can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 IPx9K Shock resistant to EN 60721-3-7 50 g Vibration resistant to EN 60721-3-7 20 g Torsion and bending load Not permissible continuously Housing dimensions 75 x 75 x 40 mm (L x W x H) Color Anthracite Material PA12 Fixing Two M5 screws During operation -25 °C to +85 °C Ambient temperature During transport and storage -40°C to +85°C Weight Approx. 200 g 1) OTP: One Time Programmable
Transponders 6.6 RF370T SIMATIC RF300 146 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.6.5 Ordering data Ordering data Order Number SIMATIC RF300 RF370T transponder 32 KB FRAM, -25 to +85 degrees C, IP68; 75 x 75 x 40 mm 6GT2800-5BE00 SIMATIC RF300 RF370T transponder 64 KB FRAM, -25 to +85 degrees C, IP68; 75 x 75 x 40 mm 6GT2800-6BE00
Transponders 6.6 RF370T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 147 6.6.6 Dimensional drawing  Figure 6-16 RF370T dimension drawing Dimensions in mm (inches in brackets)
Transponders 6.7 RF380T SIMATIC RF300 148 System Manual, 09/2007, J31069 D0166-U001-A5-7618 6.7 RF380T 6.7.1 Features The SIMATIC RF380T transponder is an extremely rugged and heat-resistant round data carrier suitable e.g. for applications in the automotive industry. SIMATIC RF380T transponder Features Area of application Identification tasks in applications (e.g. automotive industry) with cyclic high temperature stress > 85 °C and < 220 °C Typical applications: • Primer coat, electrolytic dip area, cataphoresis with the associated drying furnaces • Top coat area with drying furnaces • Washing areas at temperatures > 85°C • Other applications with higher temperatures Memory • Read-only area (4 bytes UID) • Read/write memory (32 KB) • OTP 1) memory (20 bytes) Write/read range Refer to SectionField data for transponders, readers and antennas (Page 37) Assembly • Direct assembly on metal or flush-mounting is possible. • The transponder can be secured using a special holder (see installation guidelines, section on RF380T). The tag size is designed such that it can be secured on a skid or also directly on a body. Degree of protection IP 68 High resistance to mineral oils, lubricants and cleaning agents 1) OTP: One Time Programmable
Transponders 6.7 RF380T SIMATIC RF300 System Manual, 09/2007, J31069 D0166-U001-A5-7618 149 6.7.2 Installation guidelines for RF380T It is essential that you observe the instructions in the Section Installation guidelines (Page 54). The following section only deals with features specific to the SIMATIC RF380T. 6.7.2.1 Mounting instructions CAUTION You are strongly recommended to only use the tag with the original holder specified. Only this holder guarantees that the data memory observes the listed values for shock, vibration and temperature. A protective cover is recommendable for applications in paint shops. Data memory support Short version (6GT2 090-0QA00) Long version (6GT2090-0QA00-0AX3)  Dimensions in mm, inches in brackets  Dimensions in mm, inches in brackets Material: V2A sheet-steel with thickness 2.5 mm BI 2.5 DIN 59382 1.4541
Transponders 6.7 RF380T SIMATIC RF300 150 System Manual, 09/2007, J31069 D0166-U001-A5-7618 Assembly of data memory with support $QWHQQDVLGHRIWDJ&RYHURSWLRQDO*74% Figure 6-17 Assembly of tag with support Scope of supply The support is provided with all mounting parts and a mounting diagram. Mounting screws for securing the support are not included. The mounting screws are of diameter M 10. The minimum length is 25 mm. The optional cover can be used for the long and short versions of the support.

Navigation menu