Silex Technology SX10WAG SX-10WAG User Manual
Silex Technology, Inc. SX-10WAG
Contents
Manual 7
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 853227 |
| Application ID | LaukvOXcIPzqOvsCEHhDzA== |
| Document Description | Manual 7 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 148.55kB (1856934 bits) |
| Date Submitted | 2007-10-10 00:00:00 |
| Date Available | 2007-11-28 00:00:00 |
| Creation Date | 2007-10-05 11:00:33 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-10-05 11:10:06 |
| Document Title | untitled |
$00_WT-4_En.book Page 115 Friday, August 10, 2007 2:02 PM Go to the [System and Maintenance] > [Administrative Tools] control panel and open the [Internet Information Services] console. Creating an ftp Server / Windows XP Enter an IP address and sub-net mask for the ftp server and click [OK]. Right-click [Default FTP Site] and select [Properties] from the menu that appears. Operating the WT-4 for FTP 115 $00_WT-4_En.book Page 116 Friday, August 10, 2007 2:02 PM Creating an ftp Server / Windows XP Select the IP address entered in Step 4 and enter a [TCP Port] number. The port number is normally 21. Open the [Home Directory] tab and select [a directory located on this computer]. The root directory for images uploaded to the ftp server is listed in the [Local Path] text box; choose a folder and select [Read], [Write], and [Log visits]. Click [OK] to close the properties dialog. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119). 116 Operating the WT-4 for FTP $00_WT-4_En.book Page 117 Friday, August 10, 2007 2:02 PM Macintosh Open [System Preferences] and click [Network]. Select [AirPort] from the [Show] menu. Creating an ftp Server / Macintosh Select [Manually] from the [Configure IPv4] menu and enter an IP address and sub-net mask. Make a note of this address. It will be needed to set up the WT-4. Operating the WT-4 for FTP 117 $00_WT-4_En.book Page 118 Friday, August 10, 2007 2:02 PM Creating an ftp Server / Macintosh Click [Show All] to return to the System Preferences dialog. Click [Sharing]. Select [Services] and enable [FTP Access]. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119). 118 Operating the WT-4 for FTP $00_WT-4_En.book Page 119 Friday, August 10, 2007 2:02 PM Ad Hoc Networks Connect the UC-E4 as shown below. Turn the camera on. Power switch MMY Copying Network Profiles to the Camera / Ad Hoc Networks Copying Network Profiles to the Camera Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock. Operating the WT-4 for FTP 119 $00_WT-4_En.book Page 120 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Ad Hoc Networks The dialog shown below will be displayed; click [Next]. Select [Add/Edit profiles] and click [Next]. 120 Operating the WT-4 for FTP $00_WT-4_En.book Page 121 Friday, August 10, 2007 2:02 PM Select [Add new profile] and click [Next]. Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Ad Hoc Networks 121 $00_WT-4_En.book Page 122 Friday, August 10, 2007 2:02 PM Select [Manual setup] and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 122 Operating the WT-4 for FTP $00_WT-4_En.book Page 123 Friday, August 10, 2007 2:02 PM Enter the following information and click [Next]. Number of characters (ASCII) Number of characters (hex) WEP (64-bit) 10 WEP (128-bit) 13 26 Copying Network Profiles to the Camera / Ad Hoc Networks • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically. • Network type: Select [Ad hoc]. • Channel: Select a communication channel. However, if the network name (SSID) is consistent, a predetermined channel separate from the channel set here may be applied. • Authentication: Choose the type of authentication used on the network. In ad-hoc mode, the camera supports open system and shared key authentication. • Encryption: The type of encryption used on the network. Choose from [None] (open networks only), 64-bit WEP, and 128-bit WEP. • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: • Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption]. Operating the WT-4 for FTP 123 $00_WT-4_En.book Page 124 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Ad Hoc Networks 124 Operating the WT-4 for FTP $00_WT-4_En.book Page 125 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Ad Hoc Networks • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180). • IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4. • Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4. • Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. • DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. 125 $00_WT-4_En.book Page 126 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory. • Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password]. • Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server. • PASV mode: Select this option to use PASV mode. 126 Operating the WT-4 for FTP $00_WT-4_En.book Page 127 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 13 Select [Finish wizard] and click [Next]. Operating the WT-4 for FTP 127 $00_WT-4_En.book Page 128 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. Copying Network Profiles to the Camera / Ad Hoc Networks UMMY The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140). 128 Operating the WT-4 for FTP $00_WT-4_En.book Page 129 Friday, August 10, 2007 2:02 PM Infrastructure Networks Connect the UC-E4 as shown below. Turn the camera on. Power switch MMY Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks 129 $00_WT-4_En.book Page 130 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Infrastructure Networks The dialog shown below will be displayed; click [Next]. Select [Add/Edit profile] and click [Next]. 130 Operating the WT-4 for FTP $00_WT-4_En.book Page 131 Friday, August 10, 2007 2:02 PM Select [Add new profile] and click [Next]. Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks 131 $00_WT-4_En.book Page 132 Friday, August 10, 2007 2:02 PM Select [Manual setup] and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 132 Operating the WT-4 for FTP $00_WT-4_En.book Page 133 Friday, August 10, 2007 2:02 PM [Automatic setup] cannot be selected in the following cases: • When editing a preset network • When using a third party network adapter • When the computer network is set to a static IP address • When the OS is Windows XP SP1 or Mac OSX Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks “Automatic Setup” Choose [Automatic setup (recommended)] when using a new network for the first time. The following dialog will be displayed; if multiple infrastructure networks have been setup, select a setting which will be used for network connection and click [Next]. to proceed to Step 11 (pg.137). 133 $00_WT-4_En.book Page 134 Friday, August 10, 2007 2:02 PM Enter the following information and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically. • Network type: Select [Infrastructure (access point)]. • Authentication: Choose the authentication used on the network. In infrastructure mode, the camera supports WPAPSK, WPA2-PSK, open system, and shared key authentication. • Encryption: Choose the encryption used on the network. The options available depend on the authentication used: Open: None, 64- or 128-bit WEP WPA-PSK: TKIP, AES Shared: 64- or 128-bit WEP WPA2-PSK: AES • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: Number of characters (ASCII) Number of characters (hex) WEP (64-bit) WEP (128-bit) 13 10 26 TKIP, AES 8–63 64 • Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption]. 134 Operating the WT-4 for FTP $00_WT-4_En.book Page 135 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Infrastructure Networks Operating the WT-4 for FTP 135 $00_WT-4_En.book Page 136 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180). • IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4. • Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4. • Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. • DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7. 136 Operating the WT-4 for FTP $00_WT-4_En.book Page 137 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory. • Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password]. • Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server. • PASV mode: Select this option to use PASV mode. 137 $00_WT-4_En.book Page 138 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 13 Select [Finish wizard] and click [Next]. 138 Operating the WT-4 for FTP $00_WT-4_En.book Page 139 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140). Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks UMMY 139
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2007:10:05 11:10:06+09:00 Create Date : 2007:10:05 11:00:33+09:00 Title : untitled Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 25 Mod Date : 2007:10:05 11:10:06+09:00 Creation Date : 2007:10:05 11:00:33+09:00 Metadata Date : 2007:10:05 11:10:06+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools