Silex Technology SX10WAG SX-10WAG User Manual

Silex Technology, Inc. SX-10WAG

Manual 7

115Creating an ftp Server / Windows XPOperating the WT-4 for FTP4Enter an IP address and sub-net mask for the ftp server and click [OK].5Go to the [System and Maintenance] > [Administrative Tools] control panel and open the [Internet Information Services] console.6Right-click [Default FTP Site] and select [Properties] from the menu that appears.$00_WT-4_En.book Page 115 Friday, August 10, 2007 2:02 PM
116Creating an ftp Server / Windows XPOperating the WT-4 for FTP7Select the IP address entered in Step 4 and enter a [TCP Port] number. The port number is normally 21.8Open the [Home Directory] tab and select [a directory located on this computer]. The root directory for images uploaded to the ftp server is listed in the [Local Path] text box; choose a folder and select [Read], [Write], and [Log visits]. Click [OK] to close the properties dialog.This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119).$00_WT-4_En.book Page 116 Friday, August 10, 2007 2:02 PM
117Creating an ftp Server / MacintoshOperating the WT-4 for FTPMacintosh1Open [System Preferences] and click [Network].2Select [AirPort] from the [Show] menu.3Select [Manually] from the [Configure IPv4] menu and enter an IP address and sub-net mask.Make a note of this address. It will be needed to set up the WT-4.$00_WT-4_En.book Page 117 Friday, August 10, 2007 2:02 PM
118Creating an ftp Server / MacintoshOperating the WT-4 for FTP4Click [Show All] to return to the System Preferences dialog.5Click [Sharing].6Select [Services] and enable [FTP Access].This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119).$00_WT-4_En.book Page 118 Friday, August 10, 2007 2:02 PM
119Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTPCopying Network Profiles to the CameraAd Hoc Networks1Connect the UC-E4 as shown below.2Turn the camera on.3Turn the computer on and start the WT-4 Setup Utility.•Windows: Double-click the [WT-4 Setup Utility] icon on the desktop•Macintosh: Click the [WT-4WirelessSetup] icon in the Dock.MMYPower switch$00_WT-4_En.book Page 119 Friday, August 10, 2007 2:02 PM
120Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP4The dialog shown below will be displayed; click [Next].5Select [Add/Edit profiles] and click [Next].$00_WT-4_En.book Page 120 Friday, August 10, 2007 2:02 PM
121Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP6Select [Add new profile] and click [Next].7Enter the following information and click [Next]:•Profile name: Enter a name of up to 16 characters.•Profile type: Choose [FTP Server].•Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks.$00_WT-4_En.book Page 121 Friday, August 10, 2007 2:02 PM
122Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP8Select [Manual setup] and click [Next].$00_WT-4_En.book Page 122 Friday, August 10, 2007 2:02 PM
123Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP9Enter the following information and click [Next].•Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically.•Network type: Select [Ad hoc].•Channel: Select a communication channel. However, if the network name (SSID) is consistent, a predetermined channel separate from the channel set here may be applied.•Authentication: Choose the type of authentication used on the network. In ad-hoc mode, the camera supports open system and shared key authentication.•Encryption: The type of encryption used on the network. Choose from [None] (open networks only), 64-bit WEP, and 128-bit WEP.•Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used:•Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption]. WEP (64-bit) WEP (128-bit)Number of characters (ASCII) 513Number of characters (hex) 10 26$00_WT-4_En.book Page 123 Friday, August 10, 2007 2:02 PM
124Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP$00_WT-4_En.book Page 124 Friday, August 10, 2007 2:02 PM
125Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP10Enter the following information and click [Next].•Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180).•IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4.•Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4.•Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7.•DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7.$00_WT-4_En.book Page 125 Friday, August 10, 2007 2:02 PM
126Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP11Enter ftp settings and click [Next].•FTP server: Enter the URL or IP address of the ftp server.•FTP server port: Enter the port number for the ftp server. The default port is 21.•FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory.•Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password].•Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server.•PASV mode: Select this option to use PASV mode.$00_WT-4_En.book Page 126 Friday, August 10, 2007 2:02 PM
127Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP12Confirm that settings are correct and click [Next].13Select [Finish wizard] and click [Next].$00_WT-4_En.book Page 127 Friday, August 10, 2007 2:02 PM
128Copying Network Profiles to the Camera / Ad Hoc NetworksOperating the WT-4 for FTP14Turn the camera off and disconnect the USB cable.The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140).UMMY$00_WT-4_En.book Page 128 Friday, August 10, 2007 2:02 PM
129Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTPInfrastructure Networks1Connect the UC-E4 as shown below.2Turn the camera on.3Turn the computer on and start the WT-4 Setup Utility.•Windows: Double-click the [WT-4 Setup Utility] icon on the desktop•Macintosh: Click the [WT-4WirelessSetup] icon in the Dock.MMYPower switch$00_WT-4_En.book Page 129 Friday, August 10, 2007 2:02 PM
130Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP4The dialog shown below will be displayed; click [Next].5Select [Add/Edit profile] and click [Next].$00_WT-4_En.book Page 130 Friday, August 10, 2007 2:02 PM
131Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP6Select [Add new profile] and click [Next].7Enter the following information and click [Next]:•Profile name: Enter a name of up to 16 characters.•Profile type: Choose [FTP Server].•Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks.$00_WT-4_En.book Page 131 Friday, August 10, 2007 2:02 PM
132Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP8Select [Manual setup] and click [Next].$00_WT-4_En.book Page 132 Friday, August 10, 2007 2:02 PM
133Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTPA“Automatic Setup”Choose [Automatic setup (recommended)] when using a new network for the first time. The following dialog will be displayed; if multiple infrastructure networks have been setup, select a setting which will be used for network connection and click [Next]. to proceed to Step 11 (pg.137).[Automatic setup] cannot be selected in the following cases:•When editing a preset network•When using a third party network adapter•When the computer network is set to a static IP address•When the OS is Windows XP SP1 or Mac OSX$00_WT-4_En.book Page 133 Friday, August 10, 2007 2:02 PM
134Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP9Enter the following information and click [Next].•Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically.•Network type: Select [Infrastructure (access point)].•Authentication: Choose the authentication used on the network. In infrastructure mode, the camera supports WPA-PSK, WPA2-PSK, open system, and shared key authentication.•Encryption: Choose the encryption used on the network. The options available depend on the authentication used:Open: None, 64- or 128-bit WEP Shared: 64- or 128-bit WEPWPA-PSK: TKIP, AES WPA2-PSK: AES•Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used:•Key Index: Set the key index when [WEP64] or [WEP128] is set for [Encryption]. The default index is [1]. Setting the key index is not necessary when [No encryption] was selected for [Encryption].WEP (64-bit) WEP (128-bit) TKIP, AESNumber of characters (ASCII) 5 13 8–63Number of characters (hex) 10 26 64$00_WT-4_En.book Page 134 Friday, August 10, 2007 2:02 PM
135Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP$00_WT-4_En.book Page 135 Friday, August 10, 2007 2:02 PM
136Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP10Enter the following information and click [Next].•Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180).•IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4.•Subnet mask: If the network is configured for manual IP addressing, enter a subnet mask for the WT-4.•Default gateway: If the network requires a gateway address, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7.•DNS Server: If a Domain Name Server exists on the network, select this option and enter the address supplied by the network administrator. This option applies only if [FTP server] is selected for Profile type in Step 7.$00_WT-4_En.book Page 136 Friday, August 10, 2007 2:02 PM
137Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP11Enter ftp settings and click [Next].•FTP server: Enter the URL or IP address of the ftp server.•FTP server port: Enter the port number for the ftp server. The default port is 21.•FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory.•Anonymous login: Select this option for anonymous login, or leave this option unchecked to supply a [User ID] and [Password].•Use proxy server: If a proxy server is required for ftp, select this option and enter the server name and port number for the proxy server.•PASV mode: Select this option to use PASV mode.$00_WT-4_En.book Page 137 Friday, August 10, 2007 2:02 PM
138Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP12Confirm that settings are correct and click [Next].13Select [Finish wizard] and click [Next].$00_WT-4_En.book Page 138 Friday, August 10, 2007 2:02 PM
139Copying Network Profiles to the Camera / Infrastructure NetworksOperating the WT-4 for FTP14Turn the camera off and disconnect the USB cable.The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140).UMMY$00_WT-4_En.book Page 139 Friday, August 10, 2007 2:02 PM

Navigation menu