Silex Technology SX10WAG SX-10WAG User Manual

Silex Technology, Inc. SX-10WAG

Manual 9

152Mode / Choose ProfileMenu GuideModeChoose from [Transfer mode] (pg.70), [Thumbnail select mode] (pg.79), [PC mode] (pg.90), and [Print mode] (pg.97). Selecting any of these options displays a profile list showing the connections available in the selected mode.Choose ProfileSelecting an option from the [Mode] menu displays a profile list showing the connections available in the selected mode. The WT-4 can store a total of up to nine host, server, and printer profiles. To delete a profile, highlight it in the profile list and press the O button. To edit an ftp server profile, highlight the profile and press the N button (pg.153).To view profile information, highlight the desired profile and press the L (?) button. The following information will be displayed.DUsing the MenusIf the shutter-release button on the camera is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost. Select [Monitor off delay] in [Custom menu] and configure a longer power off timing.Device (PC, ftp server, or printer)Interface type (pg.51, pg.62, pg.121, pg.131, pg.177)Profile name(pg.51, pg.62, pg.121,pg.131, pg.176)SSID(pg.54, pg.65, pg.123,pg.134, pg.177)$00_WT-4_En.book Page 152 Friday, August 10, 2007 2:02 PM
153Mode / FTP Registration (for Connection to ftp Servers Only)Menu GuideFTP Registration (for Connection to ftp Servers Only)In transfer mode, ftp profiles can be created without using the WT-4 Setup Utility. See the Appendix for more information (pg.175). This option is only available when the WT-4 and computer are connected with a USB cable and the WT-4 is on. Editing ftp ProfilesTo edit an ftp server profile, highlight it in the profile list in transfer mode and press the N button. Choose the settings to be edited from [Wireless], [TCP/IP], and [FTP], or select [Done] to save changes and return to the profile list. Only ftp server profiles can be edited in this fashion; to edit other profiles, use the WT-4 Setup Utility. This option is only available when the WT-4 and computer are connected with a USB cable and the WT-4 is on. AText EntryThe following dialog is displayed when text entry is required.Use the multi selector to highlight the desired character in the keyboard area and press the center of the multi selector to insert the highlighted character at the current cursor position (note that if a character is entered when the field is full, the last character in the field will be deleted). To delete the character under the cursor, press the O button. To move the cursor to a new position, press the N button while using the multi selector.To complete entry and return to the previous menu, press the G button. To exit to the previous menu without completing text entry, press G.Keyboard area: Use multi selector to highlight letters, press center to select.Text display area: Text appears in this area. To move cursor, press N while using up, down, left, and right buttons on multi selector.$00_WT-4_En.book Page 153 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / WirelessMenu Guide154❏WirelessThis option contains settings for connection to a wireless network and is only displayed if the interface type for the selected profile is [Wireless & Ethernet]. The wireless menu has two pages of options; to scroll between pages, press the multi selector up or down.Wireless Menu, Page 1/2SSID: A BSS- or ESS-ID is required for connection to a wireless LAN adapter or access point. To change the BSS- or ESS-ID, highlight the current ID, press the multi selector to the right, and enter a new ID as described in the note on the previous page. Press J to return to the wireless menu (1/2).Communication mode: Choose a mode according to how the wireless network is set up.AEthernet networksWhen utilizing an ethernet cable connection, it is not necessary to configure wireless settings.Option DescriptionInfrastructure (default)Connection to wireless network is via access point.Ad-hoc Direct peer-to-peer wireless connection to host.$00_WT-4_En.book Page 154 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / WirelessMenu Guide 155Channel *1Choose channel.2Return to wireless menu (1/2).* Not required if [Infrastructure] is selected for [Communication mode].Authentication: Choose the type of authentication used by the computer or access point. The camera supports WPA-PSK, WPA2-PSK, open system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in infrastructure mode.$00_WT-4_En.book Page 155 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / WirelessMenu Guide156Wireless Menu, Page 2/2Encryption1Highlight encryption method.AEncryptionThe type of encryption available depends on the option selected for [Authentication] (pp.54, 65):•Open: none, WEP•Shared: WEP•WPA-PSK: TKIP, AES•WPA2-PSK: AES2Return to wireless menu (2/2).3Highlight encryption key. Skip Steps 3–5 if [No encryption] was selected in Steps 1–2.4Edit encryption key:•Base 16: Press multi selector left or right to select character, up or down to change. 64-bit keys require 10 digits, 128-bit keys 26 digits, TKIP and AES keys 64 digits.•ASCII: Enter key as described on page 26. 64-bit keys are 5 characters long, 128-bit keys 13 characters long, TKIP and AES keys 8 to 63 characters long.$00_WT-4_En.book Page 156 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / WirelessMenu Guide 1575Return to wireless menu (2/2).Key index: In infrastructure networks that use WEP encryption, choose the key index used by the host or access point.1Choose index.2Return to wireless menu (1/2).$00_WT-4_En.book Page 157 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / TCP/IPMenu Guide158❏TCP/IPAdjust TCP/IP settings as described on the following pages. The TCP/IP menu has two pages of options; to scroll between pages, press the multi selector up or down.TCP/IP Menu, Page 1/2Obtain automatically: Highlight this option and press the multi selector right to toggle it on (M) or off. Turn this option on if the wireless network is configured to supply an IP address automatically by DHCP server or Auto IP (pg.180). Otherwise turn it off and enter the address and sub-net mask supplied by the network administrator as described below.1Highlight [Address].2Enter edit mode.3Press multi selector left or right to select, up or down to change.$00_WT-4_En.book Page 158 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / TCP/IPMenu Guide 1594Exit to TCP/IP menu (1/2). If sub-net mask is required, proceed to Step 5.5Highlight [Mask].6Enter edit mode.7Choose sub-net mask.8Exit to TCP/IP menu (1/2).$00_WT-4_En.book Page 159 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / TCP/IPMenu Guide160TCP/IP Menu, Page 2/2Use gateway: Highlight this option and press the multi selector right to toggle it on (M) or off. If the network requires a gateway address, turn this option on and enter the address supplied by the network administrator as described below.1Highlight [Address].2Enter edit mode.3Press multi selector left or right to select, up or down to change.4Return to TCP/IP menu (2/2).$00_WT-4_En.book Page 160 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / TCP/IPMenu Guide 161Enable DNS: Highlight this option and press the multi selector right to toggle it on (M) or off. If a Domain Name Server (DNS) exists on the network, turn this option on and enter the address supplied by the network administrator as described below.1Highlight [Address].2Enter edit mode.3Press multi selector left or right to select, up or down to change.4Return to TCP/IP menu (2/2).$00_WT-4_En.book Page 161 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide162❏FTPAdjust ftp settings as described on the following pages. The ftp menu has three pages of options; to scroll between pages, press the multi selector up or down.FTP Menu, Page 1/3Server1Highlight [Address].2Display text entry dialog.3Enter server address (required; pg.153).4Return to ftp menu (1/3).$00_WT-4_En.book Page 162 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide 1635Highlight [Folder].6Display text entry dialog.7Enter destination folder name (pg.153).8Return to ftp menu (1/3).9Highlight [Port].$00_WT-4_En.book Page 163 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide16410Enter edit mode.11Press multi selector left or right to select, up or down to change.12Return to ftp menu (1/3).PASV mode: Highlight this option and press the multi selector right to toggle PASV mode on (M) or off. Turn this option off to use normal (PORT) mode. Be sure the server supports PASV mode before turning this option on.$00_WT-4_En.book Page 164 Friday, August 10, 2007 2:02 PM

Navigation menu