Sintai Optical CWFB124 Wi-Fi module User Manual Part 8

Download:
Mirror Download [FCC.gov]
Document ID	2154025
Application ID	kTak8r+VzUPxo2yHLQPJ2g==
Document Description	User Manual Part 8.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	211.9kB (2648689 bits)
Date Submitted	2013-12-30 00:00:00
Date Available	2013-12-30 00:00:00
Creation Date	2013-12-17 14:58:48
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-12-19 10:20:06
Document Title	User Manual Part 8.pdf
Document Creator	Adobe InDesign CS6 (Windows)

Image Edit:
Multiple edit can be repeated under
image edit mode. Only one picture is
saved finally.
Under the 1:1 single playback mode,
select a picture and then press the up
arrow button to enter image edit and
start detecting face.
Press the up arrow button to do HDR
editing.
Press the down arrow button to delete
one picture.
Press the left and right arrow buttons
to edit the color. 12 effects in total for
selection.
The following beautifier touch-up
functions cannot be enabled until a face
is detected. You may press relative color
buttons to edit.
: Skin Soften
: Eye Enlargement
: Eye Brightening
126
Edit tings corresponding to each type of files
can be tabled.
O Available; X Non-available
HDR Color
Beautifier
Delete
Normal
(face)
Normal (no
face)
Panorama
Time-lapse
Video
HDMI CEC Connection
Function
Full Size
Playback
Zoom-in
Playback
Index
Playback
Video/Time-lapse
Movie Play
Cont.
Group
Play
Panoramic
File Play
Zoom In
O (Movable to
four directions
during
zoom-in)
Zoom Out
Rotate
O (turn left
only)
O (turn left
only)
Play Slide
Show
Edit Image
O*1
Info Hiding/
Display
Delete
*2
O*2
O*3
O*3
O*3
*2
*1 After entering the image edit, relative operation of the beautifier cannot appear until a face
is detected.
*2	It is available before and in playing and during pause.
*3	The function of Delete One cannot work until the camera enters image edit mode.
127
10
Smart Device APP Operating Method
Position Service Function
If your smart device supports GPS, APP can record GPS location on picture files. This function
is non-available for video files.
Android system:
1. There will appear a prompt that ["PIXPRO Remote Viewer" Would Like to Use Your GPS
services !!] in your first time of enabling APP. If GPS of your smart device is off, you may
select enabling or disabling it according to the prompt on the screen.
2. If GPS is on in your second time of or later enabling APP, your device will directly enter the
home page of APP; if GPS is off, you may select enabling or disabling it according to the
prompt on the screen.
128
iOS system:
1. When the APP is enabled for the first time, if the position service is enabled, it will prompt
whether to not「PIXPRO Remote Viewer wants to share your current location」; if the
position service is disabled, it will prompt「Turn on Location services to allow "PIXPRO
Remote Viewer" to determine Your Location.」; and if clicking 「setting」, the smart device
position service setting interface will appear.
2. When the APP is enabled for the second time or later, status of position service:
Position service
state selected at the
first-time enabling of
the APP
Enable
Off
The second-time or later enabling of the APP
The position service
is enabled
The position service is Off
Enable the position
service
A prompting message 「Turn on
Location services to allow "PIXPRO
Remote Viewer" to determine Your
Location」will appear; and if clicking
「setting」, the smart device position
service setting interface will appear.
A prompting message that「Location Service is disabled
for "PIXPRO Remote Viewer" Please exit PIXPRO SP1,
then go to ‘Settings; General; Location Services’ and enable
the service for "PIXPRO Remote Viewer"」; and if clicking
「Confirm」, the APP home interface will appear. Besides,
the position service will be automatically disabled.
129
APP Home
Remote Viewfinder
After connecting Wi-Fi, click the
icon
on the smart device interface and enter
into APP homepage after setting the global
positioning function.
Click [Remote Viewfinder] in APP homepage
to enter the shoot mode, use intelligent
device to control the camera's recording.
•[Playback]:
•[Remote Viewfinder]:
Camera shooting is
controlled through
intelligent device.
•[About]:
Check the version of
the APP.
to
In the interface of the APP, click
back to the previous stage of interface.
But in index Playback and Remote
Viewfinder states, click
to back to
the APP home directly.
130
Intelligent device shooting image:
Enter playback state
10
16M
EV-3.0
ISO400
F3.5
12345
1/2000
11
12
13
14
15
16
17
18
19
1. Enter the index playback state on the
camera
2. Enter into
16M
7. Self-timer
Can be adjusted in
mode.
menu.
12345
0

Off
: 2s
Menu
Reset
: 10s
Format
EV-3.0
ISO400
F3.5
1/2000
(9
,62
)

8. Zoom display Bar
9. Flash mode display
Can be adjusted in
: Flash auto
•
Click the blank space outside menu to
exit.
3. Zoom control (T: zoom in, W: zoom out)
4. ISO value options: Auto, 200, 400, 800,
1600, 3200, 6400, 12800.
Can be adjusted in
mode.
5. Exposure compensation
(scope: +3.0~-3.0)
Can be adjusted in
6. Touch focus display
Fill flash
Force Off
mode.
10.Image size
Can be adjusted in
mode.
4:3
mode.
16MP: 4640×3480
10MP: 3648×2736
4MP: 2336×1752
3MP: 2048×1536
0.3MP: 640×480
131
3: 2
14MP: 4608×3072
16: 9
12.ASCN automatically adjusts a proper
exposure mode to make sure a clear
focus for good photos.
1 Click ASCN to enter menu setting
interface.
12MP: 4608×2592
2MP: 1920×1080
11. White balance allow the users to adjust
the color temperature in different light
sources to make sure color will appear
correctly. Can be adjusted in
mode.
16M
Mode
12345
ASCN
AE Bracketing
WDR
HDR
EV-3.0
ISO400
F3.5
1/2000
Continuous shooting
: AWB
: Daylight
: Cloudy
: Shadow
: Fluorescent
3 Click the blank space outside menu to
exit.
: Fluorescent H
13.Battery life
: Tungsten
14.Available shots
: Custom
15.No SD Card in Camera side
: Color temperature compensation
(1900K~10000K)
132
2 Select the sub-menu and save it.
16.Shutter speed (scope: 1/4000 ~ 30s)
mode.
Can be adjusted in
17.Aperture value (scope: F3.5 ~ F5.6,
divided by the equipped lens.
Can be adjusted in
mode.
18.Shoot photos
19.Switch shooting mode to record mode.
All files in APP shooting are saved in
the camera.
Slide the roller to change the values for
EV, ISO, aperture and shutter.
16M
EV-3.0
ISO400
)
Shooting mode method of operation:
1. Click icons at the top of the interface to
set corresponding parameters.
2. Click
to shoot photos.
3. Click
state.
to enter the index playback
In capture mode, the touch shooting
function defaults to ON, the camera
focuses at touch point before shooting
and take shots whether it fails or not.
12345

133
Smart device recording image:
'9'

5. Video size setup
16:9
1080p30 (1920×1080@30fps)
720p60 (1280×720@60fps)
720p30 (1280×720@30fps)
4:3
EV-3.0
VGA (640×480@30fps)
640×480 (120fps)
6. Self-timer
1. Switch shooting mode to record mode
2. Start video recording
3. Enter the index playback state on the
camera
4. EV: adjust the animation brightness.
Adjustment range: +3.0~-3.0
134
: Off
: 10s
7. Video icon
8. Battery life
9. Record time
Playback
Video mode method of operation:
1. Click icons at the top of the interface to
set corresponding parameters.
2. Click
to start video recording, and click
to stop video recording.
3. Click
state.
to enter the index playback
Click「playback」in the APP Home to enter
the playback state.
There are two options in playback mode.
• Index playback (camera/smart device)
• Single playback (video/photo)
135
Index playback (Camera / smart device)
1. In the APP Home, click「playback」to
enter the index playback state, and enter
the photo album of the camera in default.
2. The index playback interfaces of the
smart device and the camera can be
switched by shifting a red dot on the
interface of the smart device.
3. The index playback interface of the smart
device displays files downloaded from the
camera to the smart device.
4 item slected
•
: Enter the shooting status
•
: Download the files in the camera
into the smart devices
•
: Select multiple files to delete
136


•
: Enter the shooting status
•
: Multiple photos selection
Setting function
Enter the selection interface after selecting
, and click thumbnails so that files can be
selected. Clicking the same thumbnail for the
second time will cancel selection.
•
: Share files directly to social
networks
•
: Play back in the form of slide show
•
: Delete the selected files
Click
at the right upper corner of the
interface so that the setting interface can
appear.

•
In Android system, the download
size can be set and cookies can be
deleted.
•
In iOS system, the download size can
be set and cookies can be deleted.
And the iOS 5 system has log-in and
log-out functions. But for iOS 6 system
or above, the account log-in is decided
by the device system.
137
Download function
In the index playback interface of the
to enter the download
camera, click
mode. Select a file to begin downloading.
In the index playback interface, clicking
or
will pause downloading.
Download will restart when the
playback interface appears again.
Ј忍

The currently selected files, including
the files being downloaded and wait for
downloading, can't be more than 20.



: Downloading
: Wait downloading
: The download is complete
: Cancel download
: Fail in downloading
: Grey and inaction
138
Delete function
1. In the index playback interface of the
camera, click to enter the selection
interface, select the files to be deleted,
click again to delete the files, and
select whether or not to delete in the
delete prompting interface.
2. In the index playback interface of the
smart device, click
to enter the
selection interface, select the files
needing to be deleted, click to delete
the files, and select whether or not to
delete in the delete prompting interface.
4 item slected
2 item slected





Current file being loaded or waiting
for being loaded can not be deleted.
The files which are being downloaded
and wait downloading cannot be
deleted.
No select box is displayed on the file
which is being downloaded.
139
Slide play function
1. In the index playback interface of the
to enter the
smart device, click
selection interface.
2. Firstly, select the files to be played, and
to start slide play.
then click
3. If no file is selected, directly click
that all files will be played.
4 item slected


140
so
Clicking a photo in slide play will stop
slide play and the single photo
interface will appear.
When playing movie in a slide, only
the first frame is displayed; clicking
the movie will stop slide play and the
movie play interface will appear.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2013:12:19 10:20:06+08:00
Create Date                     : 2013:12:17 14:58:48+08:00
Metadata Date                   : 2013:12:19 10:20:06+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Document ID                     : uuid:31405fe0-af3c-41b8-9d2a-53cea1dc53b0
Instance ID                     : uuid:d1603dd3-ac35-4893-ac9a-6cda3303cb9d
Producer                        : Adobe PDF Library 10.0.1
Has XFA                         : No
Page Count                      : 15
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools