Solectek 36WAN1 SkyWay MAX User Manual Part 3
Solectek Corporation SkyWay MAX Users Manual Part 3
Solectek >
Contents
Users Manual Part 3
SkyWay-MAX 21 Operator’s Guide G. Diagnostic Tools The BSU contains a number of embedded network tools to assist with the debug and verification of network operation. These tools include: yy Ping yy TraceRt yy ARP Table yy Bridge Table Usage and syntax of these tools is similar to those of standard networking appliances. Access to these tools on the Manager Application is via Administration : Diagnostic Tools. SkyWay-MAX 22 Operator’s Guide VII. Appendix A – System Defaults A. Default Configuration BSU Login admin Password admin IP Address 192.168.0.1 Netmask 255.255.255.0 Default Gateway 192.168.0.10 FTP AddressFTP User FTP Password RF Channel Plan Default.cc RF Power 36 dBm Optimal RSSI -70 dBm Uplink Modulation Auto Downlink Modulation Auto BSID 00000B:xxxxxx, where x is last 3 octets of RF MAC Security yy X.509 Certificates Disabled yy Access Control List Disabled yy Encryption Clear Administrative Services None User Services None Name Location GPS Coordinates Antenna Bearing Antenna Beamwidth SS Login admin Password admin SkyWay-MAX 23 Operator’s Guide SS (cont’d) IP Address 192.168.0.2 Netmask 255.255.255.0 Default Gateway 192.168.0.10 FTP Address FTP User FTP Password BSID Verification Disabled BSID table RF Channel Plan Default.cc SS Name SS Location GPS Coordinates SkyWay-MAX 24 Operator’s Guide B. Default Channel Plan File (3.4 – 3.6 GHz operation) For coverage of the 3.4-3.6 GHz frequency range, the SkyWay MAX system uses a default channel plan which is a subset of the CEPT/ERC/REC 14-03E channel plan. Operators may use the default channel plan file, as-is, or may use it as template to create custom .cc files. These files can be uploaded to the same directory in the BSU and SS and activated in the system through the management system. Filename: Path: default.cc /etc/umac/cc.d #/etc/umac/cc.d/default.cc-----------------------------# # Contains default channel centers for 3.4-3.6 GHz operation # Valid Entries are: # name CHANNEL_PLAN_NAME CHANNEL_PLAN_NAME is a string for name of the plan # abbrev ABBREVIATION ABBREVIATION of plan name up to 4 symbols # channel FREQ BW FREQ - channel frequency in kHz BW - channel bandwidth in MHz #------------------------------------------------------# # This section is for common channel plan properties name Default abbrev DB cyclic_prefix 32 #------------------------------------------------------# Channels are listed below this line. #----------- Freq ----- BW ----------------------------channel 3411750 3500 channel 3418750 3500 channel 3411750 3500 channel 3418750 3500 channel 3425750 3500 channel 3432750 3500 channel 3439750 3500 channel 3461750 3500 channel 3468750 3500 channel 3475750 3500 channel 3482750 3500 channel 3489750 3500 SkyWay-MAX 25 Operator’s Guide channel 3501750 channel 3508750 channel 3515750 channel 3522750 channel 3529750 channel 3536750 channel 3543750 channel 3551750 channel 3558750 channel 3565750 channel 3572750 channel 3579750 channel 3586750 channel 3593750 # 7 MHz channels channel 3420500 channel 3434500 channel 3463500 channel 3477500 channel 3491500 channel 3510500 channel 3524500 channel 3538500 channel 3553500 channel 3567500 channel 3581500 channel 3595500 #end 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 SkyWay-MAX 26 Operator’s Guide VIII. Appendix B Management Systems A. Manager Application – Expanded Navigation Bar B. Telnet / Console Commands SkyWay-MAX 27 Operator’s Guide IX. Appendix C Services - Advanced A. Available Classifiers The following Classifier Types are supported on the SkyWay MAX system 802.3 Source MAC Address Destination MAC Address Ethertype 802.1p/q VLAN ID VLAN Priority Range Ipv4 Protocol + Port Range Source Address, with bit mask Destination Address, with bit mask ToS Value, with bit mask B. QoS Scheduling Parameters Available Parameters, by Scheduling Type Scheduling Type Supported Parameters UGS Grant Size Grant Interval Maximum Sustained Traffic Rate Minimum Reserved Traffic Rate Maximum Latency Traffic Priority rtPS Grant Interval Maximum Sustained Traffic Rate Minimum Reserved Traffic Rate Maximum Latency Traffic Priority nrtPS Maximum Sustained Traffic Rate Minimum Reserved Traffic Rate Traffic Priority BE Maximum Sustained Traffic Rate Traffic Priority SkyWay-MAX 28 Operator’s Guide Parameter Definitions Parameter Description Default Value 1. Grant Size: The size of each UGS grant in bytes. -- 2. Grant Interval. The period between UGS grants, or rtPS polls, in mS 20 3. Max Sustained Traffic Rate Upper limit, or ceiling, of traffic rate, in bits/second A setting of zero means unlimited. 4. Min Reserved Traffic Rate Lower limit of traffic rate reserved per Service, in bits/ 250 sec 5. Max Latency Upper latency limit per Service, in mS. Only applies when actual traffic rate is < Min Reserved Rate (ie the Service is not overloading the reservation. 1200 6.Traffic Priority Defines priority when packet matches 0 (Administrative and Open IP Services) classification on multiple Services. 7 (User Services) Range is 0-7, with 7 as the highest priority. C. Recommended Service Class configurations 1. 2. 3. 4. Open IP Internet Data Voice IPTV
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:635f999d-9ae5-414f-936a-9a6fd2d374a4 Modify Date : 2008:05:22 11:44:31-04:00 Create Date : 2008:05:22 11:44:26-04:00 Metadata Date : 2008:05:22 11:44:31-04:00 Document ID : uuid:5d6a3180-0a26-4d69-b88b-bbe80d9fb3e5 Format : application/pdf Tagged PDF : Yes Creator : Adobe InDesign CS3 (5.0) Producer : Adobe PDF Library 8.0EXIF Metadata provided by EXIF.tools