Sony Group IJ1001SNBT Energy Storage System User Manual 4

Download:
Mirror Download [FCC.gov]
Document ID	1698900
Application ID	WYKTfjRhSdWJZeQjApAF6g==
Document Description	User Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.54kB (1181797 bits)
Date Submitted	2012-05-16 00:00:00
Date Available	2012-11-12 00:00:00
Creation Date	2012-05-01 16:04:42
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2012-05-01 16:04:50
Document Title	Microsoft PowerPoint - Energy_Storage_System_User_manual_Rev5_20120425.pptx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	07665

Energy Storage System “IJ1001SNBT”
Set the connecting box and conduit
Wiring 4 position bellow.
Grounding
Copyright Sony Energy Devices Corporation
57
Energy Storage System “IJ1001SNBT”
Set the connecting box and conduit
Tie the cables follow the bellow instruction and add some of magnetic core.
Tie the cables
Add the magnetic core provided by Sony
Copyright Sony Energy Devices Corporation
58
Energy Storage System “IJ1001SNBT”
Set the connecting box and conduit
Set the front door then Completed.
Copyright Sony Energy Devices Corporation
59
Energy Storage System “IJ1001SNBT”
On site software update
Because of preinstalled software in factory, normally it is not required to install any software.
But in some cases, software update may be required on site.
On site software update procedure is as follows.
1.
2.
3.
TBD
Copyright Sony Energy Devices Corporation
60
Energy Storage System “IJ1001SNBT”
Commissioning
CAUTION : Connect the energy storage system to the electrical utility grid only after
receiving prior approval from the utility company.
CAUTION : Be aware that only qualified personnel should must connect the energy
storage system to the electrical utility grid.
CAUTION : Ensure that all AC and DC wiring is correct. Ensure that none of the AC and
DC wires are pinched or damaged. Ensure that all junction boxes are properly closed
Copyright Sony Energy Devices Corporation
61
The Energy Storage System Activation
Connecting to the Internet
1. Confirm that there is a home router with wireless LAN working in the residence.
2. Connect with the home router using WPS.
Please follow a procedure below. (as same as normal WPS operation)
1. Turn ON the circuit protector located behind of the energy storage server.
( RED ARROWS )
2. Wait for booting the Energy Storage Server.
3. Push WPS button on the home router.
4. (Within 2 minutes) Push WPS button located
behind of the energy storage server.
( BLUE ARROW )
※ While WPS period, WiFi LED is blinking.
After that, if WiFi LED stays turning ON,
WLAN setting is successfully completed.
WiFi
Charge Discharge
If pattern of blinking is changed,
there is some error on WPS.
Please try again from step 1.
(turn OFF Energy Storage Server once)
62
The Energy Storage System Activation
Activating Energy Storage System for Field Trial
1. Turn ON the Energy Storage Server and wait for boot.
2. Confirm that the Energy Storage System is already connected to the Internet.
(WPS is already done)
3. Access to the cloud server to register the Energy Storage System, using Installer Web Application.
Installer Web Application is the same one for HEMS Gateway.
Please follow a procedure below. (as same as one for HEMS Gateway)
1. Login to the installer application. (need installer account and password)
Enter installer account and password.
Then push “Login” button.
63
2. Input SI Setup ID.
Input SI Setup ID
Then push OK
3. Confirm SI Setup ID.
If SI Setup ID is correct,
then push OK
64
4. Go to registration process of Energy Storage System (called “Battery” in this application).
Push “Register New Gateway”
5. Scan barcode which is labeled on transparent acrylic board inside the outer enclosure.
If there is no barcode scanner, you can input barcode directly.
(080046xxxxxxxxxx) Then push “OK”
65
6. Confirm that Energy Storage System is powered on (called “Battery” in this application).
66
7. After waiting for a while※, it is successfully registered.
Confirm that Energy Storage System which is newly registered is listed in Registered Gateways
and its status is online.
※ If Energy Storage System is already booted and ready, it is around 10-15 seconds.
But if you supply power in step6, it takes around 5 minutes.
67
APPENDIX
68
Energy Storage System “IJ1001SNBT”
How to Power ON/OFF the Energy Storage System
Power ON
: Turn ON the circuit protector located behind of the energy storage server
inside the outer enclosure.
Power OFF : Turn OFF the breakers
Copyright Sony Energy Devices Corporation
69
Energy Storage System “IJ1001SNBT”
Indicator LEDs
Energy Storage Server

WiFi
Charge
Discharge
or
WiFi
Charge
Discharge
or
WiFi
Charge
Discharge
Inverter
There are five inverters in the outer enclosure.
Each inverter has a LED indicator at the center of side panel of one.
Startup LED Operation (beginning of discharge):
One minute after DC power is first applied to the inverter, six short green blinks indicate a successful
inverter startup sequence. Six short red blinks after DC power is first applied to the inverter indicate a
failure during inverter startup.
Post-Startup LED Indications:
Flashing Orange – Producing power
Flashing Red
– Not producing power
GFDI Fault:
A solid red status LED when DC power has been cycled, indicates the inverter has detected a ground
fault (GFDI) error.
Copyright Sony Energy Devices Corporation
70

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 07665
Create Date                     : 2012:05:01 16:04:42+09:00
Modify Date                     : 2012:05:01 16:04:50+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:05:01 16:04:50+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft PowerPoint - Energy_Storage_System_User_manual_Rev5_20120425.pptx
Creator                         : 07665
Document ID                     : uuid:390e13df-7677-4f5b-b55f-ca2dbe4ce1d7
Instance ID                     : uuid:0f05375a-cb1f-4a19-92c8-a336a8654047
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Page Count                      : 14

EXIF Metadata provided by EXIF.tools