Sony 7130501 Licensed portable User Manual P800 UM

Sony Mobile Communications Inc Licensed portable P800 UM

Exhibit 8 User Manual Part 2

104PreliminaryVideo playerYou can view video clips that you have saved in your smartphone. The video clips can be downloaded in the smartphone from an Internet site or transferred from a PC via cable. It is also possible to send these video clips to other phones or PC´s, via infrared communication, Bluetooth wireless technology and multimedia messaging.It is not necessary to download the video clips to be able to view them. You can use the streaming function and view the video clip from the Web site where it is located. The video clip is played with only a short time delay.The video player supports the MPEG-4 file format, e.g. name.mp4.List viewIn the list view, you get an overview of all the MPEG-4 video clips in your smartphone. You can search for specific video clips, zoom the video clip names and sort them by name, date, size or type. At the bottom of the screen you can see how many video clips you have saved in your smartphone.To view a video clip1. Select > .2. Tap a video clip in the list.Display dump of List view in Video player.P800_UM.book Page 104 Thursday, July 11, 2002 10:58 AM
105Video playerVideo playerVideo playerVideo playerPreliminaryTip Use the Find function to locate a certain video clip, and the Zoom function to change the size of the screen fonts.To sort the video clips• Select Edit > choose how you want to sort the video clips in the current folder.PreferencesWhen you download a video clip to your smartphone, it is saved in the download cache memory. When this memory is full you have to empty it to be able to download new video clips to your smartphone.To clear the download cache1. Select Edit > Preferences.2. Select Clear cache > Done.When you view a video clip from a Web site, using the streaming function, a media buffer is used to provide a steady flow of data. Increasing the size of the media buffer may improve the play-back of the video clip.To change the media buffer size1. Select Edit > Preferences.2. Tap Custom setting > move the slider left or right.Detail viewIn the detail view you can send, rename, delete or categorize your video clips. Only the video clips saved in you smartphone can be handled in the detail view. To handle a video clip saved on a Sony Memory Stick, you first have to save it to your smartphone.Icon FunctionStop the track that is playing. Play/Pause the highlighted track.Rewind the current track.OBS!New image!!P800_UM.book Page 105 Thursday, July 11, 2002 10:58 AM
106PreliminaryTo rename a video clip1. Select Video > Rename clip.2. Enter a video clip name > Done.Two or more video clips can not have the same name.To send a video clip1. Select the video clip you want to send.2. Select Video > Send as > choose how you want to send it.Tip Use the Folder function to organize all your video clips.To copy the current video clip to another folder, select Video > Copy to, then select a folder from the list.To view the video clip info1. Select Video > Clip info.To delete a video clip1. Select the video clip you want to delete.2. Select Video > Delete clip.Saving video clipsWhen you play video clips that you have received via e-mail or multimedia messaging, or that you have downloaded to your smartphone from the Web, the viewer detail view is automatically launched. From the viewer detail view you can then save the video clip to your smartphone.To save a video clip from another application1. Select the video clip you want to save.2. Select Video > Save clip.3. Select what folder you want to save the video clip in > Save.Forward the current track.Takes you back to the previous view.Icon FunctionP800_UM.book Page 106 Thursday, July 11, 2002 10:58 AM
107Online servicesOnline servicesOnline servicesOnline servicesOnline servicesOnline service is a customized service offered by a local network operator. Online services provides a mechanism which allows applications that exist on the sim to interacate and operate with the smartphone. It may provide services ranging from weather forecasts to the latest information from the stock market. The service is dependant on a special SIM card which supports Online services. Note Contact your operator to find out which services are available for your account.P800_UM.book Page 107 Thursday, July 11, 2002 10:58 AM
108PreliminaryWorld clockSources (this section will be removed)The following documents and resources have been used when writing this chapter.• QUARTZ DFRD Time UI Specification Rev 5 2001-03-27The time and date are always displayed in standby mode. You can customize the display of times and dates throughout the smartphone. You can set your current location and another location of your choice. It is also possible to set three different alarms.Time and dateTo set the current time and date1. Select > .2. Tap the clock to view the current time and date settings.3. Tap the Date box, then tap the arrows to set the current year and month. Then tap the current day.4. Tap Daylight saving time, then tap the checkbox next to the zone that currently has summer time > Done. This is only required if you are currently in a country with summer time.Alarm slotOther cityCurrent cityCurrent dateP800_UM.book Page 108 Thursday, July 11, 2002 10:58 AM
109World clockWorld clockWorld clockWorld clockPreliminary5. Tap the time box, then tap the upper half of the hour or minute box to increase the number displayed, or the lower half to decrease the number.6. Tap the am/pm box to switch between am and pm > . This is only possible if you use the 12-hour time format.7. Select Done.FormatYou can specify how you want the time and date to be displayed on the screen, and if you want to use the 12- or 24-hour time format.To set the time and date display format1. Select > .2. Tap the clock to view the current time and date settings.3. Select Format.4. Tap the Date format box > choose a format.5. Tap the Date separator box > choose a separator.6. Select a Time format.7. Tap the Time separator box > choose a separator.8. Select Done.P800_UM.book Page 109 Thursday, July 11, 2002 10:58 AM
110PreliminaryWorkdaysYou can specify what days you work, if, for example, you want to set an alarm that sounds only on workdays. You can also specify the first day of your week to customise the display of both Week and Month views in Calendar.To specify your workdays1. Select > .2. Tap the clock > “right arrow key icon” twice.3. Tap the checkboxes next to the days you normally work.4. Select First day of week > choose a day.5. Select Done.LocationsSpecify the country and city you are currently in. The city you select will be displayed next to the clock in Time.If you are away from home, for example travelling in another country, it can be useful to know what the time is in your home country as well as the country you are in. The city you select as Other city will be displayed below the clock in Time.To set the locations1. Select > .2. Select Time > Set location.3. Tap the Current country box > the country you are in at the moment.P800_UM.book Page 110 Thursday, July 11, 2002 10:58 AM
111World clockWorld clockWorld clockWorld clockPreliminary4. Tap the Current city box > the city you are in at the moment. If the city you are in is not listed, select the city closest to you.5. Tap the Other country box > choose a country.6. Tap the Other city box > choose a city.7. Select Done.NumbersYou can choose how you want the measurements and numbers in your smartphone to be displayed in all your applications. Distances can be displayed using the imperial or the metric system and different punctuation marks can be used as separators.To set the number details1. Select > .2. Select Time > Set location.3. Select Numbers.4. Tap the distance boxes > choose imperial or metric.5. Choose separators and Symbol position in the same way as in 4.6. Select Done.AlarmsYou have the possibility to set up to three different alarms in your smartphone. You can choose to activate one of the preset alarms, or set a new alarm with your own definitions.You can choose to set a silent alarm, where only a message is displayed when it goes off, or you can set a sound alert. If you are on the phone when an alarm is set to go off, the alarm will not go off until you hang up.To activate an existing alarm• Tap the checkbox in the alarm slot. is displayed on the status bar on the screen.To set a new alarm1. Select > .2. Tap one of the alarm slots.P800_UM.book Page 111 Thursday, July 11, 2002 10:58 AM
112Preliminary3. Select Time > choose at what time you want the alarm to go off.4. Select When > choose how often you want the alarm to go off:–Once The alarm will go off at a time more than 24 hours from now but within the next eight days.–Next 24 hours Within the next 24 hours.–Daily Every day at the specified time.–Weekly Every week at the specified time.–Workdays Every workday at the specified time.5. Select Alarm sound > choose a sound.6. Select Message > choose a preset message or write a new one.7. Select Done.8. Make sure the checkbox next to the alarm is selected.When the alarm goes off, select Snooze to postpone the alarm for five minutes or Silence to turn off the alarm sound. To turn off the alarm completely, select Done.P800_UM.book Page 112 Thursday, July 11, 2002 10:58 AM
113CalculatorCalculatorCalculatorCalculatorPreliminaryCalculatorSources (this section will be removed)The following documents and resources have been used when writing this chapter.• QUARTS DFRD Calculator UI Specification Rev4 2001-03-09• R380 user’s guideThe Calculator is a standard 10-digit calculator. You can add, subtract, multiply, divide, calculate square root and percentage. It also has a memory function.To use the calculator1. Select > .2. Enter the calculations by tapping the digits.All calculations, except percentage calculations, are performed as they are entered, for example: 5+5x5=50, not 30.Percentage calculations are performed backwards. To calculate, for example, 10% of 50, enter 50x10%. The result is displayed when you tap the % key.Key functionsYou can copy and paste values to and from other applications by selecting Calculator > Copy or Paste.Values stored in the memory are retained while using other programs.m+Tap once to store an entered value in the memory.If you already have entered a value in the memory, tap once to add the value in the display to the value in the memory.mrTap once to retrieve a value from the memory and enter it into the display.Tap twice to clear the memory.m-Tap once to subtract the entered value from the value in the memory. The memory is adjusted but not displayed.Tap once to delete the last digit you entered.C Tap once to reset the display to 0.P800_UM.book Page 113 Thursday, July 11, 2002 10:58 AM
114Personalizing your Personalizing your Personalizing your Personalizing your Personalizing your smartphoneEditorial Comment: Illustrations to be redone in greyscale and linked in by reference.There are a number of ways you can give your smartphone a personal touch and change its settings to suit your requirements.Changing your Application Shortcuts The standby screen shown when the flip is closed shows five shortcuts to applications.From the Control panel you can change them, rearrange them as you prefer, or even hide them.if you wish. See “Application shortcuts” on page 25Displaying the Area Code in the Standby ScreenIf your network operator provides CBS (Cell Broadcast Services) with cell information you can set your smartphone to display the area code below the network name in the standby view. See “CBS tab” on page 129.Setting a background pictureFrom the Control panel you can set a background picture image for the standby screen. See “Display” on page 117 You can obtain suitable background picture files by downloading, beaming using Bluetooth or Infrared or transfer them from your PC.Background picture images are 208 x 320 pixels and divided into two parts: the upper part, 208 x 144 pixels, carries the image seen in standby screen, the lower part can be set to a colour or design to influence the light that shines through the keys. The images can be JPEG, GIF, BMP, WBMP, MBM or PNG format.Setting a Screen SaverYou can set a 'screen saver' image to be displayed after a period of inactivity. From the Control panel you can also switch this facility on and off and select the delay period before the screen saver is displayed. See “Display” on page 117. Key lock and device lock may be used in combination with the screen saver. When you press a button or touch the screen, you will be prompted to activate keys and/or enter the device lock code.P800_UM.book Page 114 Thursday, July 11, 2002 10:58 AM
115Personalizing your Personalizing your Personalizing your Personalizing your PreliminaryImage format is the same as for the background picture image.Adding images to your ContactsYou can store a picture with each entry in Contacts. See “Managing contacts” on page 54.Pictures are easily taken using the CommuniCam (see “CommuniCam” on page 85, though of course other images can be used.If your network operator provides a CLI (Calling Line Identity) service, your smartphone can display the contact's picture together with the other information when an incoming call is received with a CLI matching that contact (not all numbers can be displayed). The contact's picture is also displayed when making a call. To show the contact’s picture when receiving an incoming call:1. Select Phone > Edit >Preferences > Incoming call picture2. Select the Show picture for incoming calls check box.3. Tap Done.Ring signalsYour smartphone can play both iMelody format and polyphonic ring signals (WAV, AU, AMR, and MIDI sound file formats). You can add as many ring signals as desired, subject only to available file space.A ring signal may be selected for an entry in Contacts, so that the caller can be identified by the ring signal that is played.You can set a voice note recording as a ring signal. See “Using voice notes as ring signals” on page 84. Choose between a recording you have made yourself, and a recording you may have downloaded, transferred from your PC, or received via e-mail, EMS or MMS.P800_UM.book Page 115 Thursday, July 11, 2002 10:58 AM
116PreliminaryThe recommended format for WAV files is PCM, 22,050 Hz, 8 bit, Mono, often called 'radio quality'. This format requires approximately 22 kilobytes of space for each second duration. Many PC audio applications support WAV.Alarm tones and sound notificationYou can choose different sounds for alarms and notifications in these applications:Master ResetIn the Control panel you can reset all the settings in your smartphone to the way they were when you originally bought it. See “Master reset” on page 124 for more details.World clockSee“Alarms” on page 8 CalendarSet a sound for reminder alerts, see “Customize the calendar” on page 78)TasksSet a sound for reminder alarms. See “Settings” on page 82MessagesSet a different sound for each type of message as notification of a new message: •SMS•e-mail• MMS• Notice (BIO messages)• Area information•WAP PushSee “Messaging accounts” on page 124P800_UM.book Page 116 Thursday, July 11, 2002 10:58 AM
117Control panelControl panelControl panelControl panelControl panel The Control panel is the location for all the main settings on your smartphone that are system wide and affect more than one application. This is the main place to go to initially set up your smartphone, and to change settings at any point thereafter. To access it, select Control Panel in ApplicationsTo make the settings easier to find, they have been grouped into three groups shown on separate tabs: Device, Connections and General:To see a list of all control panel settings and the groups to which they have been assigned, tap Control panel > Set groups.• To sort the list of settings by group name: at the top of the list, tap Group.• To change the group to which a setting is assigned: select the name of the setting in the list.The sections below, arranged in alphabetical order, describe the settings available for each of the default items in the Control panel. BluetoothBluetooth uses radio waves to enable wireless connections between your smartphone and other Bluetooth-enabled devices. This method of linking works well at a range of up to 10 metres, even if there is an obstruction between the two devices.Device tab Connections tab General tabCertificate Manager Bluetooth InternationalDisplay Cable Time & dateFlip closed shortcuts InfraredFlip removed Internet accountsFormat disk IP security managerLanguage Messaging accountsMaster reset Secure tokensStorage manager WAP accountsSystem soundsText inputUser greetingWIM managementP800_UM.book Page 117 Thursday, July 11, 2002 10:58 AM
118PreliminaryBluetooth settings are shown on two tabs: Tip You will probably find that the preset name of your smartphone, and of devices you pair it with, are not very meaningful or easily recognizable. It is a good idea to change these names to something more useful. The name you choose for your smartphone appears on any devices you pair it with.To locate other Bluetooth-enabled devices in the vicinity: 1. Tap Add. The Available Bluetooth devices dialogue opens:• All enabled devices that are discoverable within range are shown with their name and icon. You can use Show: to restrict the list to one category (only PC, for example). • Paired devices that are within range are shown with regular text.• Non-paired devices that are within range are shown with their names in italics.• Devices that are within range but unknown are shown with a preset name.If a device you want to pair with your smartphone does not appear in the list, check that:• It is on and within range• Bluetooth on the device is on and discoverable.To pair a device to your smartphone:1. Select the device in the Available Bluetooth devices list2. If the device requires a passkey you will be asked to enter it. 3. Tap DoneNote The other device (a PC, for example) may require that you enter the same passkey in its own dialogue.DevicesA list of all the Bluetooth-enabled devices that your smartphone is paired (bonded) with. • To change the name of a device, select the name in the list.• To remove a device from the list, select the name and tap Remove. Settings• A “friendly” device name for your smartphoneSecurity-related settings:• Its Bluetooth operation mode• How it should act when receiving a beamed entry. P800_UM.book Page 118 Thursday, July 11, 2002 10:58 AM
119Control panelControl panelControl panelControl panelPreliminarySecurityOn the Settings tab you can set your smartphone to different operation modes:You can also set how your smartphone should act when receiving beamed items:CableUse Cable to set the cable connection mode and the connection parameters used when communicating through your smartphones cable port. Tap Control Panel > Connections and select Cable to:• Choose the cable connection mode: When connecting via cable the smartphone must be set in PC connect mode or Modem mode, see table below. • Set the baud rate, parity, number of stop bits, character length and type of flow control required for the connection When connecting your smartphone via the desk stand to a USB port on your PC, use the following (default) settings:Tip You can set the cable connection mode when the flip is closed by selecting Applications> Connections > IconCable.Certificate managerDigital certificates ensure that the web or WAP pages you visit, or any software you install, really are created by the person you expect.OnAll Bluetooth functionality from your smartphone works. Your smartphone is connectable, paired devices can access it.AutoAll Bluetooth functionality from your smartphone works. Your smartphone is not connectable.OffBluetooth is turned off.DiscoverableOther Bluetooth-enabled devices can find and connect to your smartphone. To pair with another device, your smartphone must be DiscoverableAlways receiveReceives the entry automatically.Ask firstYou will be shown a Connection request that you can accept or reject.Never receiveRejects the item automatically.PC connect mode Modem mode• Synchronization• Installation of software• Backup and restore• Smartphone as a modem• Phone Book Manager (PC software)Baud rate460800ParityNoneStop bits1Character length1Flow controlCTS/RTSP800_UM.book Page 119 Thursday, July 11, 2002 10:58 AM
120PreliminaryCertificates may be present on the pages that you view or the software that you download. Your smartphone compares these certificates with a set of certificates that is stored in Certificate manager to ensure the authenticity of the page or software. If the certificates do not match, your smartphone informs you, and gives you the following choices:• Prevent the page being loaded or the software being installed• Continue at your own riskThe certificates on your smartphone have been created and issued by an independent organisation to ensure their authenticity.Security informationSecurity information is displayed when Certificate manager cannot be sure of the origin of the page or software. For example, security information will be displayed if:• The certificate on a page has expired• The identity of a software manufacturer cannot be verifiedSecurity information is also displayed when a certificate on your smartphone has:• Expired• Been revoked by the independent organisation that issued it.Adding and removing certificatesYour smartphone handles certificates automatically so, most of the time, you can browse the Internet securely without using Certificate manager. If you do need to add or remove a certificate, you will usually be informed by your network operator or system administrator. You should remove a certificate from Certificate manager if you are informed, or suspect, that:• The certificate does not belong to the person who supplied it• The certificate was issued incorrectly by the independent organisation that created itType of certificateThe type can be either Certificate Authority or User. •Certificate Authority certificates contains server details. This type of certificate is handled by your smartphone when the server only requires server authentication. This means that your identity remains anonymous. •User certificates contain your identity. This type of certificate is used when the server asks for client authentication. The client application requests you to identity yourself by choosing a user certificate. P800_UM.book Page 120 Thursday, July 11, 2002 10:58 AM
121Control panelControl panelControl panelControl panelPreliminaryDisplayUse the Display settings to control the screen and power functions of your smartphone. WallpaperYou can set a picture to be the background for the standby screen. (See“Flip closed - overview” on page 22 for details on the standby view.) Select Browser from the drop-down list to see image files available on your smartphone. The picture you selected last by browsing is shown as default in the list. Read more about background picture images in “Personalizing your smartphone” on page 110Screen saverYou can set a screen saver image to be displayed after a period of inactivity. You can also switch this facility on and off and select a delay period of up to 15 minutes before the screen saver is displayed. Read more about screensaver images in “Personalizing your smartphone” on page 110If you select the Phone lock protected check box the Device lock will activate when the delay runs out. Read more about locks and security in “Phone locks” on page 16.Power saveYou can set a power saver to switch of the screen after a period of inactivity (2, 3, 5, 7, 10, 15, or 30 minutes). When the power saver activates, the screen will be switched off.If you set times for both screen saver and power saver the power save setting will automatically be set higher.LightYou can set the screen light settings for car use and handheld use.LockTap Lock to activate the Screen saver immediately.If the Phone lock protected check box has been selected this will also activate the Device lock.AutoLight switches on when you tap the screen, press a key, or receive an incoming callOnLight is always onOff Light is always offP800_UM.book Page 121 Thursday, July 11, 2002 10:58 AM
122PreliminaryCalibrateOccasionally you may find that you tap one object (for example a button or menu option) but another is activated. Calibrating the screen ensures that the correct object is activate. To restore calibration to the factory settings, press the Jog DialFlip closed shortcutsUse this dialogue to configure the application shortcuts shown in the Flip Closed Standby view, see “Standby view” on page 24. You can change the five shortcuts shown. If you feel that the shortcuts obscure your wallpaper you can choose to have them hidden when you don’t need them. By default these shortcut icons are displayed:To change an application shortcut in the Standby view:1. In the Flip closed shortcuts dialogue, select the icon you wish to change. The name of the application is shown in the Set Application pick list.2. Choose the application you want to replace it with from the list.Your choices will remain, even after power is lost. On a master reset, the default settings will be re-applied.To hide the application shortcuts when your smartphone is inactive:1. Clear the Shortcuts always displayed check box. with the caption.Flip removedWhen you use your smartphone with the hardware flip removed, you can use the keys on the virtual flip instead. Use this setting to turn it on or off (see “Virtual flip” on page 27).Format diskWhen you format a disk, you delete all the information on it, including any applications that you've installed.Your smartphone comes with one Sony Memory Stick Duo which is displayed here. Any Sony Memory Stick Duo that you install in your smartphone is also displayed.You can rename a disk to give it a more meaningful name.InfraredUse this setting to control the state of the infrared communications port of your smartphone. You can set it On, Off or On for 10 minutes. Read more about connecting to other devices using infrared in “Connection via infrared port” on page 127Messages Contacts Call list Calendar ApplicationsP800_UM.book Page 122 Thursday, July 11, 2002 10:58 AM
123Control panelControl panelControl panelControl panelPreliminaryInternationalUse these settings to set the locations shown in World Clock, as well the units for distances, numerical separators, and how currency values should be shown.There are two tabs: Locations and NumbersOn the Locations tab:•Set Current country and Current city to your current location.•Set Other country and Other city to an alternative location (for example your home location if you are abroad).If the city you want is not listed, select another city in the desired time zone.On the Numbers tab:•Set Long Distance and Short distance to Imperial or MetricLong distances are those that are displayed in and are measured in miles or kilometres. Short distances are those that are measured in metres or and centimetres, or feet and inches.• Set the decimal separator and thousands separator you desire.• For applications that use currency values you can set a currency symbol and choose how the symbol should be placed in relation to the symbol.Internet accountsYou access the Internet using an Internet Service Provider (ISP), who supplies you with account details including: a username, a password, and the phone number or web site address that your smartphone automatically uses to access the Internet. You need to set up an Internet account before you can:• Access web pages and download MMS messages• Set up an e-mail account to send and receive e-mail messages.Tip A simple way of setting up an Internet account is to ask your service provider to send you a message that contains the required information to create an account automatically on your smartphone.There are three types of Internet account:Dial-up account:.With a dial-up account, you're charged for the length of time that you're connected to the Internet.P800_UM.book Page 123 Thursday, July 11, 2002 10:58 AM
124PreliminaryThe dialogue has two tabs: Accounts and Other.Accounts tabThe Internet accounts dialogue lists all the Internet accounts that have been set up on your smartphone.You can add a New account to the list and Edit or Delete an existing accountIf you want to select an Internet account every time you connect to the Internet select the Show connection dialogue check box. This may be useful if you use different Internet accounts for Internet and Messages.Whenever you connect to the Internet, your Preferred account is the account that your smartphone prompts you to use.To create a new Internet account:1. On the Accounts tab, tap New.2. Give the account a name. This will be the name shown in your list of accounts. (In dialogs that appear while a connection is being established the text -GPRS is automatically added to names of GPRS accounts).3. Choose the Connection type. for the type of account that you want to create, GPRS or Dial-up.4. Continue entering settings as required. These will differ depending on the type of account: GPRS, dial-up or high-speed dial-up:High -speed dial-up account:This is a special kind of dial-up account. With a high-speed dial-up account, you're charged for the length of time you're connected but you can increase the connection speed so that information is transferred faster. Billing rates from your Internet Service Provider (ISP) may increase as you increase the connection speed.GPRS account: With a GPRS account, you're charged for the amount of information you view, download, or send.P800_UM.book Page 124 Thursday, July 11, 2002 10:58 AM
125Control panelControl panelControl panelControl panelPreliminaryNew GPRS accountFor some accounts you may need to make advanced settings. Tap Advanced and enter settings on the tabs as described below:GPRS Advanced settings tabsServer User name and passwordNormally, you do not have to enter a user name and password when you connect to a GPRS account. However, some service providers may require you to enter these details.AddressEnter the Internet address of your GPRS account. The address is supplied by your service provider.Log inThe settings on this tab deal with IP and DNS addresses.IP and DNS addresses uniquely identify your Internet Service Provider (ISP)'s computers, which your smartphone uses to connect to the Internet. Your smartphone can normally fetch these addresses automatically from most ISPs. If, after setting up an Internet account, you cannot connect to the Internet and you suspect these addresses are incorrect, ask your ISP for their IP and DNS addresses.IP address typesThere are four different types of IP addresses:•IPv4: Consists of four 3-digit boxes and valid input is between 000 and 256 in each box, •IPv6: Consists of eight hexadecimal boxes and valid input is between 0000 and FFFF.•IPv4 compatible: Consists of six hexadecimal boxes and four 3-digit boxes. The last hexadecimal box is prefilled with 0:0:0:0. Only the four 3-digit boxes can be changed, and the valid input is between 000 and 256.•IPv4 mapped: Consists of six hexadecimal boxes and four 3-digit boxes. The last hexadecimal box is prefilled with F:F:F:F. Only the four 3-digit boxes can be changed, and the valid input is between 000 and 256.ProxyA proxy server is a computer that stores copies of web pages so that they are retrieved faster than they would be from their original location.To use a proxy server: specify the proxy server address and port number, which are available from your Internet Service Provider (ISP).If you use a proxy server, you can still specify a list of web sites that are accessed from their original location. Enter the Internet address of each web site on a separate line in the list Proxy exceptionsGPRS Advanced settings tabsP800_UM.book Page 125 Thursday, July 11, 2002 10:58 AM
126PreliminaryNew dial-up or high-speed dial-up account Your Internet Service Provider (ISP) supplies you with your User name, your Password, and their Phone number, which your smartphone dials to connect to the Internet. If you have a high-speed dial-up account with your ISP you Tip To avoid having to change the phone number when you travel abroad: enter the international dialling prefix (for example '+') and the appropriate country code for your ISP.For some accounts you may also need to make advanced settings. OtherIf your Internet Service Provider (ISP) supports Point to Point Protocol (PPP) extensions, you can select the Enable PPP extensions check box. PPP extensions allow your smartphone to provide features such as encryption, which increases the security of your Internet connection.Your ISP may require Plain text authentication. If you select the Plain text authentication check box, the security of your connection will decrease during the connection process. Once you are connected, the security of your connection is restored.QoS Check with your mobile operator before changing any of the QoS (Quality of Service) settings.If your operator supports the use of Header compression, tapping On can speed up your connection.The settings Delay, Reliability, Peak rate, and Mean Rate are all by default set to Subscribed, which means that your operators default QoS (Quality of Service) values will apply. GPRS Advanced settings tabsP800_UM.book Page 126 Thursday, July 11, 2002 10:58 AM
127Control panelControl panelControl panelControl panelPreliminary Tap Advanced and enter settings on the tabs as described belowDial-up and high-speed dial-up advanced settings tabsLog inThe settings on this tab deal with IP and DNS addresses. For an explanation of these settings, see Log in in the table GPRS Advanced settings tabs.ScriptAs an alternative to entering your user name and password to access the Internet you may need to use a login script stored on your smartphone. Although uncommon, scripts may be required by your Internet Service Provider (ISP). Select the Use login script check box and enter the script text in the Script editorIf you select the check box Plain text authentication (required by some ISPs), the security of your connection will decrease during the connection process. Once you are connected, the security of your connection is restored.Select the checkbox Post connect terminal if:• The login script of the account that you are setting up requires that you input certain information or you will need to respond to prompts from the Internet account.• You are connecting to a dial-up account that uses Secure Access generated by a separate smart card or hard token.Proxy For an explanation of these settings, see Proxy in the table GPRS Advanced settings tabsSpeed You can only increase the speed of your connection if you have a high-speed dial-up account with your Internet Service Provider (ISP).SecureTo enable secure access for this Internet account you must link it to a vendor-associated Secure Token in this dialogue:1. Select the vendor and token names of the Secure Token that you want to link to this account from the drop lists.2. Select the Enable secure access check box.To create or delete Secure Tokens on your smartphone, tap Control panel > Connections >Secure tokens. OtherIf your Internet Service Provider (ISP) supports Point to Point Protocol (PPP) extensions, you can select the Enable PPP extensions check box. PPP extensions allow your smartphone to provide features such as encryption, which increases the security of your Internet connection.If the computer that you connect to supports call back, it can break the Internet connection after you have logged in and then call your smartphone back to re-establish the connection. Call back saves you money and increases security.To enable call back:1. Select the Enable call back check box.2. In the Call back type list, choose whether you want the ISP to call you back using the phone number stored on the provider's server (Use server number) or another phone number (Use number below).Dial-up and high-speed dial-up advanced settings tabsP800_UM.book Page 127 Thursday, July 11, 2002 10:58 AM
128PreliminaryTo Edit an Internet account:1. On the Accounts tab, select the account in the list.2. Tap Edit.3. Change your settings as desired.4. Tap Done.Note If you change the Connection type all account data for that account will be deleted.To Delete an account:1. On the Accounts tab, select the account in the list.2. Tap Delete.3. Tap Done.Other tabYou can use the Dial-up timeout and GPRS timeout settings to set up your smartphone to disconnect automatically from the Internet if you're not using it. The connection is broken after the period you specify has lapsed.Preferred Mode (bearer preference)Select GPRS only if you do not want to be disturbed by incoming phone calls while browsing the web. All incoming voice (and GSM data) calls are rejected.When you have selected GSM only no GPRS data connection is possible.If you select Automatic your smartphone will let you answer incoming GSM calls while having normal GPRS functionality. A GPRS data connection will be interrupted by a voice call.IP security managerThe IP security manager displays stored policies and only one policy can be activated at a time.There are two types of passwords needed:•IP security password: is to be set when activating the very first policy, that is, this password is only set once, but it is possibly to change it later at any time by tapping Password button.•Activation password: is needed when a policy is activated for the first time and the supplier of the policy gives this.LanguageUse this list of all languages stored on your smartphone to change language. The highlighted entry is the language presently in use.Tip To conserve storage space only a limited set of languages is loaded on your smartphone at delivery. You can use the P800 Change Language utility on the PC suite for P800 CD to load and delete languages.P800_UM.book Page 128 Thursday, July 11, 2002 10:58 AM
129Control panelControl panelControl panelControl panelPreliminaryMaster resetUse Master reset to return your smartphone to the state it was in when originally delivered. Warning! All user data will be deleted and all settings will be in your smartphone to the way they were when it was originally delivered. If you want to keep installed applications clear the Delete user installed applications check box.Messaging accountsThe Messages application can handle many different types of messages, but you must first set up accounts and make settings as described below.The Messaging accounts dialogue has four tabs, one for each type of messaging account: Tip A simple way of setting up an e-mail or MMS account is to ask your service provider to send you a message that contains the required information to create an account automatically on your smartphone.Read more about the different types of messages in “Messages” on page 57.Email tabThe Email tab shows a list of the e-mail accounts on your smartphone.You can add a New account to the list and Edit or Delete an existing account.You can choose one of your e-mail accounts as Preferred. This will be the e-mail account that your smartphone uses when you use Send as to send an entry as e-mail directly from one of your smartphone applicationsTo create a new e-mail account:1. On the Email tab, tap NewEmailYou can have any number of e-mail accounts. To receive and send e-mail, you must first set up an Internet account (if one isn't already set up). See“Internet accounts” on page 123SMSYou can only have one SMS (Short Message Service) account.These settings also apply to EMS (Extended Message Service) messages.MMSYou can only have one MMS (Multimedia Messaging Service) account. To receive MMS WAP-based content you must first set up an Internet account (if one isn't already set up). See“Internet accounts” on page 123CBSYou can only have one CBS (Cell Broadcast Services) account. The number of Area Information channels that you can subscribe to is limited by the space on your SIM.P800_UM.book Page 129 Thursday, July 11, 2002 10:58 AM
130Preliminary2. On the Basic tab, enter the following settings:3. On the Inbox tab, enter the following settings, as required:4. On the Outbox tab:Email account basic tab settingsAccount name This is the name you give to your email account.Your nameThis name appears on your outgoing e-mails.Email addressYour Internet Service Provider (ISP) supplies you with your email addressConnection type You probably won't need to change the connection type.Internet accountSelect one of your existing Internet accounts to access your e-mails.Email account Inbox tab settingsUser nameYour Internet Service Provider (ISP) supplies you with your user name, your password, and its incoming server address, which identifies the computer where your incoming e-mails are stored.Incoming server address Password To prevent others reading your e-mail: enter a password.DownloadIf you do not have much time to download your e-mails, you can choose to receive just Just headers (the sender, subject, and date only) or set a size limit (if an email is larger than the Emails smaller than limit, only the headers are downloaded). You can download the complete email later.Schedule Tap Schedule to schedule an automatic download of your incoming e-mails. E-mails that are waiting in your Outbox will not be sent at the same time.Email account Outbox tab settingsOutgoing server addressYour Internet Service Provider (ISP) supplies you with its Outgoing server address, which identifies the computer from which your outgoing e-mails are sent.Use SMTP authenticationSome SMTP servers might require authentication also when sending e-mail. In that case, select the check box Use SMTP authentication and enter your User name and Password.Use IMAP login informationIf the SMTP server accepts using your IMAP login information for authentication select the check box Use IMAP login information.Email account Inbox tab settingsP800_UM.book Page 130 Thursday, July 11, 2002 10:58 AM
131Control panelControl panelControl panelControl panelPreliminary5. On the Advanced tab:To edit an e-mail account:1. On the Email tab, select the account in the list.2. Tap Edit.3. Change your settings as desired.4. Tap Done.To delete an e-mail account:1. On the Email tab, select the account in the list.2. Tap Delete.3. Tap Done.SMS tabUse these settings to set up SMS and EMS messaging:Email account Advanced tab settingsSecure connectionYour Internet Service Provider (ISP) will tell you whether you can use either a Secure connection or Secure password authentication.A secure connection means that all information (including your username, password, and all messages) is encrypted to maximise security while you're connected to the Internet. In contrast, secure password authentication means that only your password is encrypted. Secure password authenticationOutgoing mail portYou probably won't need to change the Outgoing mail port or Incoming mail port numbers.Incoming mail portUse MIME encodingMIME encoding is a standard that allows non-textual information (for example graphics) and accented characters to be sent in emails.If you should not wish to Use MIME encoding, clear the check box.Messaging accounts SMS tab settingsService centre addressThe Service centre address is the phone number where your SMS messages are stored. It is normally imported from the SIM card but if that fails, your network operator can provide you with the service centre address.Character Set.Your network operator may also specify the Character Set.Messages stored forYou can set a time limit after which SMS messages are deleted from the network by choosing a value in the Messages stored for list.P800_UM.book Page 131 Thursday, July 11, 2002 10:58 AM
132PreliminaryTip If you send and receive SMS messages in several countries, you can avoid having to change the service centre address when you travel abroad by entering the international dialling prefix (for example '+') and the appropriate country code for your network operator.You can set the Connection type to one of the bearer types in the list.MMS tabUse these settings to set up MMS messaging.:Connection typeYou can set the Connection type to one of the bearer types in the list.If your network operator uses the GPRS network, you can choose whether to send and receive your SMS messages using this network. GPRS is generally cheaper than GSM, but in some locations GPRS may not be available. In this case, selecting GPRS preferred means that your smartphone will try to use GPRS but, if that fails, GSM will be used. Extended messagingClear the check box Extended messaging when you do not want to use EMS functions when composing your messages.SmiliesClear the check box Smilies if you want to use only plain text smilies.Messaging accounts SMS tab settingsMessaging accounts MMS tab settingsService centre addressThe Service centre address is the phone number where your MMS messages are stored and it's normally imported from the SIM card but if that fails, your network operator can provide you with the service centre address.WAP accountSpecify which of your configured WAP accounts you wish to use.•WAP accounts are created in Control panel > General (tab) > WAP AccountsDownload methodSelect between Manual or Auto:•Manual - only a notification will be sent to you smartphone and you can decide whether or not to download the full message.•Auto - the full message is downloaded directly to your smartphoneDownload size and Less thanSet whether or not to have a size limit for incoming messages:•No restrictions - the size of the incoming messages doesn't matter, all messages will be received.•Less than - messages smaller than the limit will be received, bigger messages will be deflected.P800_UM.book Page 132 Thursday, July 11, 2002 10:58 AM
133Control panelControl panelControl panelControl panelPreliminaryAdvanced settingsTap Advanced to make settings about how your smartphone will send and receive MMS messages.CBS tabOn the CBS tab you make settings related to CBS (Cell Broadcast Services. CBS services include Area information and Cell information. The availability of Cell Broadcast Services (Cell and Area Information) is operator dependent.MMS Advanced settings tabsSendThe values you give these settings will be default for all MMS messages that you send. You can of course choose other values for an individual message in MessagesYou can set the Validity period for your messages, that is, how long they should be available to the receiver. Maximum is the defaultYou can give your messages a Priority level of Low, Normal (default) or High.You can set a level of Conformance for the MMS messages that you send to make sure that they will be played back correctly on different products. You can choose one of these levels:• Standard - a warning message is displayed whenever you add non-conformant objects to an MMS. You have the option to send anyway.• Strict - non-conformant messages or messages above 30K are not sent.• None - non-conformant messages are sent.Send(cont.)Select the check boxes to provide the function you want:Hide number prevents the sent message from showing your numberRead report requests a read notification from receivers of your messages.Delivery report requests a delivery notification from receivers of your messages.Reply with history includes the original with your reply.ReceiveThese settings apply to MMS messages that you receive.Select the check boxes to send a notification message to the sender when a message is:• Delivered to you: Allow delivery notification• Read by you: Allow read notificationYou can filter reception of incoming messages by message class (Advertisements, Personal, Automatic, Information) as well messages from senders listed in Contacts. Selecting a check box will filter out messages of that category.To receive MMS messages only from senders listed in your Contacts, select all other check boxes and clear the check box for ContactsMMS Advanced settings tabsP800_UM.book Page 133 Thursday, July 11, 2002 10:58 AM
134PreliminaryCell information may be used to display the area code below the network name in the flip closed standby view.Area Information is a type of text message that is sent to all subscribers in a certain network area, for example a local traffic report.To enable Cell information:1. Select the Cell information check boxTo turn Area Information on:•Check the Area Information check box. Received messages will be displayed and automatically stored in the Area Info Inbox when dismissed.The list shows all the channels that you have defined on your smartphone. The check box for each channel shows if it is on (checked, ready to receive messages) or off (cleared, not active):To add a new channel:1. Tap New.2. Enter the number of the new channel in the New Channel dialogue. Channel numbers can be from 0 to 999. If there are too many channels defined New is disabled and you will see a message: “Maximum channels on SIM”.Channel numbering is operator dependent. Please consult your network operator for information.To turn a channel on or off:1. Select the channel in the list and check the check box. To turn it off clear the check box.To delete a channel:•Tap Delete. Since deleting a channel cannot be undone you will be asked to confirm the delete. Deleting the channel will also delete any stored Area Information messages for that channel in your Area Info Inbox.AlertsYour smartphone can notify you when a new message arrives with a different sound for each type of message that it can receive. To set up notification, tap Alert.If you check the Display notification message check box it will also see a notification message.For each type of message you can either:• Select the Default Melody, or • Select Find Melody to open the Select audio dialogue, where you can browse through your folders to pick a melody from those stored on your smartphone.P800_UM.book Page 134 Thursday, July 11, 2002 10:58 AM
135Control panelControl panelControl panelControl panelPreliminarySecure tokensYour smartphone supports secure access systems from three vendors. You manage secure access by using Secure Tokens. Read more about secure access in “Secure Access” on page 19.Each token is associated with one system and with one Internet account (or none, when you use your smartphone as a Hard Token). You can configure as many tokens as needed.The Secure tokens dialogue shows a list of secure access providers. Secure tokens relating to the provider's name are listed under the name in an open tree structure.Tap Control panel > Connections > Secure tokens to:•To Edit, Delete, or Create a new token, or •Generate a password These options are only displayed as available when a Secure token is highlighted, and greyed out when the vendors name is highlighted. The sequence of dialogues they generate will be vendor specific.A token is associated with an Internet account through the Internet settings for the account. See“Internet accounts” on page 123Many dialogue details when using secure access are vendor, system and network specific. You should contact the administrator of the network you wish to access to get the correct information.Storage managerThis dialogue helps you do housekeeping with the storage space on your smartphoneThe list shows the applications on your smartphone and the space they occupy.Removing information from applications To remove information from an application: tap on an application in the list. That application is displayed. Remove the old or unwanted entries or information.Here are some house cleaning tips for different applications:• Remove any unwanted voice notes as even short ones occupy a lot of space.•In Messages, remove any old messages from your Inbox or Sent folders.•In Tasks, remove all completed entries by tapping Tasks > Delete completed in your list of entries.• In Calendar, remove all entries in a specified time period by tapping Calendar > Remove entries in your list of entries.• Throughout your smartphone, use folders as you create and receive information to speed up housekeeping later.P800_UM.book Page 135 Thursday, July 11, 2002 10:58 AM
136PreliminaryRemoving unwanted general files Tap Files to see a list of all stored general file types on your smartphone. You can remove unwanted files and launch a viewer for each file.Uninstalling applicationsIf you uninstall an application you will have to reinstall the application if you want to use it later.To uninstall an entire application, tap Uninstall.Note You cannot uninstall the applications that came with your smartphone.System soundsTo set the sounds given when you press a button on the keypad or tap the screen in your smartphone tap System sounds. You can choose between the following sounds:Text inputThere are several standard ways of entering text in your smartphone. See“Entering text - Flip open” on page 15 and “Entering text in flip closed mode” on page 26.Use the settings on the Primary, Alternative and Flip Closed tabs to set methods for entering text in your smartphone.If you load other text input software, select it and adjust its settings here.Time & dateAdjusting the time and date here sets these throughout your smartphone.The dialogue has three tabs. You can set: Note These settings are also available in the World Clock application.Keypad Tone, Click or SilentTouch screen Click or SilentPrimaryThe method that you select here is activated automatically when you need to enter text into your smartphone.AlternativeThe method that you select here is activated if you tap at the bottom of the screen.Time & dateThe current time and date. Here you can also switch daylight savings time on or off for your location.FormatSpecify how you want the time and date to be displayed on the screen. WorkdaysSpecify the days in your working week P800_UM.book Page 136 Thursday, July 11, 2002 10:58 AM
137Control panelControl panelControl panelControl panelPreliminaryTime & date tabTo set the current date:1. On the Time &date tab, tap the date. A calendar view opens. Tap the arrows to set the current year and month.2. Tap the current date.To set the current time: 1. On the Time & date tab, tap the time. Tap the upper half of the hour or minute box to increase the number displayed, or the lower half to decrease the number.2. Tap the am/pm box > .This is only possible if you use the 12-hour time format.If the locations you have set under Control panel > International are in a country that currently has summer time (Daylight Savings Time), you can adjust the time and date.To switch daylight savings time on:1. On the Time &date tab, tap Daylight saving, select the check boxes for the zones that currently have daylight savings time.2. Tap Done.Format tabYou can specify how you want the time and date to be displayed on the screen, and if you want to use the 12-hour (am/pm) or 24-hour time format.To set the time and date display format:1. Tap Date format and choose a format.2. Tap Date separator > choose a separator.3. Tap a Time format.4. Tap Time separator choose a separator.5. Tap Done.Workdays tabYou can specify what days you work, if, for example, you want to set an alarm that sounds only on workdays. You can also specify the first day of your week to customise the display of both Week and Month views in CalendarTo specify your workdays1. Select the check boxes next to the days you normally work.2. Tap First day of week and choose a day.User greetingYour smartphone can show a user greeting on the standby screen when you turn it on. Use this dialogue to turn this function on or off. You can define your own user greeting text (up to 32 characters). The default is Sony Ericsson.P800_UM.book Page 137 Thursday, July 11, 2002 10:58 AM
138PreliminaryWAP accountsUse these settings to set up and manage WAP accounts (sometimes called WAP profiles) on your smartphone.WAP accounts are intended for MMS and for accessing the Internet through a WAP gateway. (Such gateways make use of proxy port 9200-9203.) All other proxy settings should be included in your Internet accounts!For security reasons, some WAP pages and services, for example online banking, can only be accessed from a particular WAP account.The dialogue has two tabs: Basic and Preferred.Basic tabThe dialogue shows a list of all the WAP accounts on your smartphone. You can add a New account to the list and Edit or Delete an existing account.Note You access WAP pages through an Internet Service Provider (ISP) so, when you create a WAP account, you must choose one of your existing Internet accounts or first create a new one.To create a new WAP account:1. Enter the name of the WAP account.2. Select the Internet account you want to use.3. If you are going to use a WAP gateway or a proxy, select the Use proxy check box.4. Enter the IP Address of the gateway or proxy5. Enter the Port address of the gateway or proxy. For a WAP gateway use:– 9201 for a normal connection – 9203 for an encrypted secure connection.• If the gateway/proxy requires User name and Password, which is very unusual, fill in the last two fields in the dialogue.Preferred tabSelect the check box to set a preferred WAP account. It will be used when you use the Open page command in the Internet application and when a page is opened from another smartphone application.If you do not set a preferred WAP account, the preferred Internet account will be used when connecting to the Internet.WIM managementWIM (WAP Identity Module) is used for performing security functions, especially to store and process information needed for user identification and authentication. It is a tamper-resistant store for private keys, certificates and other objects that may require a PIN for access or modification. P800_UM.book Page 138 Thursday, July 11, 2002 10:58 AM
139Control panelControl panelControl panelControl panelPreliminaryThe WIM management dialogue consists of PIN choice list and a WIM objects list.You can select a PIN from the PIN choice list. The WIM objects list changes content dynamically, displaying only the keys that are protected by the selected PIN and also have an associated certificate. Other keys that are protected by the selected PIN but do not have an associated certificate are not shown in the WIM object list. This is the case when WIM PIN (PIN-G) is selected.Note This is the PIN to access the WIM. The PIN-G applies to the whole WIM and any objects that do not have a different PIN, that is, no specific objects on the WIM are linked to PIN-G.You can change status of a PIN:•Enable PIN: A PIN code that is enabled is requested for authorisation of an operation. To proceed with the operation you must enter the PIN code. •Disable PIN: A PIN code that is disabled is not requested to authorise an operation to proceed. To change the PIN code:1. Select the PIN you want to change from the choice list 2. Tap Change PIN. If a PIN code has been blocked, you must unblock it before it can be used again. Select the PIN and tap Change PIN.P800_UM.book Page 139 Thursday, July 11, 2002 10:58 AM
140Installing programsInstalling programsInstalling programsInstalling programsInstalling programsSources (this section will be removed)The following documents and resources have been used when writing this chapter.• Linnea prototype 6.2, SW incr. 5, PA9• Quartz Application Installer/Remover UI Spec, 2001-03-27• Use Case Report for 3rd Party Installation, NKX/R-01:0256, Rev A• Linnea White Paper R1B, PA3It is possible to install new programs, applications, in your smartphone either from the PC or directly from the smartphone.These applications can be obtained in several ways:• from the Internet• from a CD• email attachment etc.Programs can also be downloaded directly to your smartphone from other devices, the internet or via email.There are two types of installation files for programs:• SIS (Symbian Standard Installation)• MIDP JAR (Mobile Information Device Profile Java Archive)Note SIS and JAR files are install packages containing several files.This chapter also applies to other types of software to install, for example, system components and add-ons.PC Suite for P800The PC Suite for P800 CD delivered with your smartphone contains a set of useful programs to install programs and manage your smartphone:•Backup and Restore - Make safety copies of your data.•File Manager - Transfer files (images, documents, music etc.) between your smartphone and PC.•Change Language - Change the system language in the smartphone.•Download Station - Install programs in the smartphone.•Smartphone Monitor - Monitors the connection, runs automatically.P800_UM.book Page 140 Thursday, July 11, 2002 10:58 AM
141Installing programsInstalling programsInstalling programsInstalling programsPreliminarySync Station - Synchronizes data in PC and smartphone.•Phone Book Manager - Edit SIM card from PC.Refer to the online help for each specific program.InstallationWhen inserting the CD in the PC a start menu is automatically shown. Select language and then start the PC Suite for P800 Setup. Follow the instructions in the installation wizard.By default the PC Suite for P800 is accessed from Start menu > Programs > Sony Ericsson > P800The Setup program also can be used later to add or delete components.Installing programs in your smartphoneInstall file securityInstallation files in SIS format are typically used for installation of C++ or PersonalJava applications or other content into the smartphone´s file system.The vendor who prepared the SIS file decides where in the file system the various content of the SIS file will be installed. This means that you need to decide if you trust that the SIS file does not contain harmful content. If you know for sure who produced the SIS file then you can take an install decision based on what you know about that vendor. Your smartphone supports cryptographic verification of vendor identity. During installation the smartphone verifies a digital signature and certificate in the SIS file against a root certificate on the phone. Successful verification means that you can trust who produced the SIS file and that the content has not been modified after it was created. If the SIS file does not contain a digital signature you will be given a warning about the problem but you can still decide to proceed with installation at own risk. In general it is recommended that you install only from SIS files where the vendor identity and file integrity can be verified. P800_UM.book Page 141 Thursday, July 11, 2002 10:58 AM
142PreliminaryMIDP applications run in a protected environment with no access to sensitive information so no signatures are required for MIDP JAR files. From a PCPC Suite for P800 must be installed in your PC and the smartphone must be connected to the PC via cable, IR or Bluetooth in order to install programs from PC. Installing programs from PC1. Connect your smartphone to the PC via cable, infrared or Bluetooth. When connected, an icon is shown in the taskbar on the PC.2. Start the PC software P800 Download Station and select application (.sis or .jar file) to install. It is also possible to double-click a file in the file manager and make the P800 Download Station start automatically.3. Confirm to install the application in the smartphone.4. Select target drive (phone memory or Memory Stick).Download to the smartphone begins.5. Installation starts when download is complete. 6. Installation is complete.From the smartphoneProgram packages can also be downloaded to your smartphone from the Internet or from Memory Stick. When downloading a file from the Internet, the installation will start automatically when the file is completely downloaded to your smartphone. The procedure below describes installation of program packages already in the smartphone but not yet installed..Installing programs in the smartphone1. Tap > Applications > Install.2. Select software in the list.3. Tap Install. If the software is certified, an information dialog is shown with the name of the software, version and supplier. Tap Install again.4. Now, depending on the software, you can be prompted to replace a previous installation, select language, memory location and select other installation options.5. Installation is complete. Tap Done.Removing programs in your smartphoneIt is sometimes necessary to remove installed programs and user data to free up memory.P800_UM.book Page 142 Thursday, July 11, 2002 10:58 AM
143Installing programsInstalling programsInstalling programsInstalling programsPreliminaryRemoving programs in the smartphone1. Tap > Applications > Uninstall and then select software to remove.2. Confirm selection.3. Tap Done.Warning! If you delete an application from your smartphone, any copy on your PC (including backups) will be deleted the next time you synchronize with your PC.Tip See also Master Reset and Storage Manager in Control Panel for more options regarding removal of programs and user data.P800_UM.book Page 143 Thursday, July 11, 2002 10:58 AM
144Connecting to other Connecting to other Connecting to other Connecting to other Connecting to other devicesSources (this section will be removed)The following documents and resources have been used when writing this chapter.• Linnea prototype 6.2, SW incr. 5, PA9• Linnea White Paper R1B, PA3• Quartz Platform 6.2 UI Specification, 2001-10-01• Use Case Report for 3rd Party Installation, NKX/R-01:0256, Rev A• UI Func Spec, Local Communication - Cable, IrDA, 20/155 17-CRH 162 02, Rev A• UI Func Spec, Local Communication – Bluetooth, 21/155 17-CRH 162 02, Rev AYour smartphone can be connected to other devices with similar interfaces, such as PCs, other smartphones and PDAs.The connection can be made via:•Cable• Infrared (IrDA)•BluetoothOnce it has been connected, you can perform various tasks, depending on what type of connection you have choosen, such as:• Using a cordless headset (Bluetooth)• Sending and receiving files via ( Infrared , Bluetooth) – ‘beaming’• Making Backup/Restore and Synchronisation of your data and file transfer. (Cable, Infrared and Bluetooth)• Using the smartphone as a modem for Dial-Up Networking (Cable, Infrared and Bluetooth)P800_UM.book Page 144 Thursday, July 11, 2002 10:58 AM
145Connecting to other Connecting to other Connecting to other Connecting to other PreliminaryPC connectivity softwareYour smartphone is delivered with a CD, PC Suite for P800. This software must be installed in the PC you want to connect to. See the chapter “Installing programs” on page 123 for more information. You do not need to install the PC Suite for P800 if you only want to perform beaming with the PC or use a cordless headset.Connection via cablePut your smartphone in the desk stand and connect the cable to an empty USB port on the PC. When connecting via cable the smartphone must be set in PC connect mode or Modem mode, see table below. The setting is made in Control panel > Connections > Cable.Serial settingsThe default settings for normal use: Connection via infrared portWhen connecting via the infrared port, make sure that both devices are placed within one metre from each other and that the infrared ports have a free line of sight between them. The infrared port on your smartphone is located on the left hand side, next to the On/Off button.PC connect mode Modem mode• Synchronization• Installation of software• Backup and restore• Smartphone as a modem• Phone Book Manager (PC software)Baud rate: 460800Parity: NoneStop bits: 1Character length: 8Flow control: CTSRTSP800_UM.book Page 145 Thursday, July 11, 2002 10:58 AM
146PreliminaryActivating the infrared portThe infrared port must be activated before communication can begin, go to Control panel > Connections > Infrared port and set the port state to On or On for 10 minutes. See the chapter “Control panel” on page 5 for more information on infrared settings. Connection via BluetoothYou can connect your smartphone to other products equipped with Bluetooth, for example PCs or other mobile phones, and exchange data. Since Bluetooth is radio-based, transmitting and receiving devices does not have to be in a free line of sight. This means that your smartphone can stay in your pocket while communicating. However, objects between transmitting and receiving units might weaken the signal.Connection to another device be made within a range of up to 10 metres. For all tasks, except beaming, it is necessary that you first set up a permanent and trusted relationship between your smartphone and the other device. This process is called pairing (other documentation refer to it as bonding). The paired devices are remembered by your smartphone also after you have turned it off so you do not need to repeat the process for every connection with those devices. The reason for pairing is to simplify future connections and to make them secure – only paired devices can connect to your smartphone.Activating Bluetooth Activate Bluetooth on your smartphone in Control panel > Connections > Bluetooth > Settings. Set Operation mode to Auto, On or Discoverable and set Receiving items to Ask first or Always receive. See the chapter “Control panel” on page 5 for more information on Bluetooth settings.PairingTo let your smartphone initiate pairing with another device1. In Control panel > Connections> Bluetooth > Settings, set Operation mode to Discoverable2. In Control panel > Connections > Bluetooth > Add. Your smartphone searches for all devices in the vicinity and lists them.3. Select the device you want your smartphone to pair with and, enter a passkey when asked for it. When the passkey is accepted, the pairing process is complete, refer to the section Passkeys below.4. If you in the future want to allow a paired device connect to your smartphone without you explicitly approving each connection you should select Control panel > Connections > Bluetooth > Devices, then select a device and set the checkbox Allow to connect without confirmation.P800_UM.book Page 146 Thursday, July 11, 2002 10:58 AM
147Connecting to other Connecting to other Connecting to other Connecting to other PreliminaryTo let another device initiate pairing with your smartphone1. In Control panel > Connections > Bluetooth > Settings, set Operation mode to Discoverable.2. Follow the other device´s manual to initiate pairing.3. When asked for a passkey, enter the same on both devices.4. If you in the future want to allow a paired device connect to your smartphone without you explicitly approving each connection you should select Control panel > Connections > Bluetooth > Devices select a device and set the checkbox Allow to connect without confirmation.To remove a paired device from your smartphoneSelect a device in the list and tap Remove.PasskeysPasskeys ensure that the device you pair with really is the device you think it is. A passkey is a set of numbers and/or letters (at least four characters) that you agree to exchange with the owner of the other device. Accessories like headsets often have a default passkey, usually ‘0000’, see the specific user’s guide.Transfer items with Send AsFrom many applications it is possible to transfer (and receive) items like appointments, contacts and images to other users. The transfer starts by entering the Send as menu in the specific application.Depending on the application and object you can choose between the following transfer methods:• Infrared •Bluetooth •SMS•MMS•EmailNote To be able to send or receive an item over infrared or Bluetooth, these functions must be activated. See“Activating the infrared port” on page 128 and “Activating Bluetooth” on page 146P800_UM.book Page 147 Thursday, July 11, 2002 10:58 AM
148SynchronizationSynchronizationSynchronizationSynchronizationSynchronizationSources (this section will be removed)The following documents and resources have been used when writing this chapter.• Linnea prototype 6.2, SW incr. 5, PA9• Linnea White Paper R1B, PA3• Users manual R380s• UI Func Spec, Local Communication - Cable, IrDA, 20/155 17-CRH 162 02, Rev A• UI Func Spec, Local Communication – Bluetooth, 21/155 17-CRH 162 02, Rev A• FS Synchronisation, 35/155 17-CRH 162 02 Uen, Rev A• UI Design Spec. Local Communication, 38/196 05-CRH 162 02 Uen, Rev A• Quartz DFRD Connectivity Specification, rev 4.00• Use Case Report for Synchronise Data, NKX/R-01:0200, Rev A• Use Case Report for Backup, NKX/R-01:0278, Rev A• Use Case Report for Restore, NKX/R-01:0279, Rev AWith PC Suite for P800 installed in your PC, your smartphone can synchronize with the following PC applications, also called Personal Information Managers (PIMs):• Lotus® Organizer® 5 & 6• Lotus® Notes® 4.6, 5.0• Microsoft® Outlook® 98, 2000, 2002Synchronization is divided into local and remote. Local synchronization is performed directly to a connected PC while remote synchronization is done over the air with a remote server in, for example, a corporate network.Local synchronizationP800_UM.book Page 148 Thursday, July 11, 2002 10:58 AM
149SynchronizationSynchronizationSynchronizationSynchronizationPreliminaryLocal synchronization is done with either cable, infrared or Bluetooth, the functionality is the same. The following items can be sychronized locally:•Email•Contacts• Calendar•Tasks• Jotter notesConfiguration of PC softwareLocal synchronization is initiated from the PC and all settings are made in the P800 SyncStation PC software. The easiest way is to configure the PC software to automatically make a synchronization every time your smartphone is connected. An icon, Smartphone Monitor, is shown on the PC taskbar when connected. In the PC go to Start menu > Programs > Sony Ericsson > P800 > SyncStation and select the items to synchronize and select manual or automatic method. Refer the online help in P800 SyncStation PC software for more information.Performing a local synchronizationMaking an automatic synchronization1. Connect your smartphone via cable, infrared or Bluetooth. 2. Synchronization starts automatically.Making a manual synchronization1. Connect your smartphone via cable, infrared or Bluetooth.2. In the PC, go to Start menu > Programs > Sony Ericsson > P800 > SyncStation and start the synchronization. Alternatively, right click on the SyncStation Monitor and select Synchronize.P800_UM.book Page 149 Thursday, July 11, 2002 10:58 AM
150PreliminaryRemote synchronizationRemote synchronization takes place over the air using the Internet and is the ideal way to keep the smartphone up to date. Using GPRS, the smartphone can be continuously connected to the remote synchronization server. Synchronization services will be offered by mobile operators, third-party service providers and as added capability to corporate PIM applications.The following items can be synchronized remotely:•Email•Contacts• Calendar•TasksRemote sync configurationEnter Remote Sync in Applications, tap Edit > Settings and fill in the following parameters:• Server address•Username•PasswordYou might also need to fill in whether to use transport login under the Protocol tab. Contact your corporate IT help desk or your service provider for information on these parametres.Performing a remote synchronizationSelecting items to synchronize1. In Remote Sync, tap one item in the list you want to be synchronized.P800_UM.book Page 150 Thursday, July 11, 2002 10:58 AM
151SynchronizationSynchronizationSynchronizationSynchronizationPreliminary Editorial Comment:Picture not correct2. Select Enable task checkbox.3. Fill in Task name or leave default.4. Fill in Server database (Contact your corporate IT help desk or your service provider).5. The item you selected to be synchronized is now above the divider in the list. (Disabled items are below the divider).6. Repeat for other items.Making a remote synchronization1. Open Applications > Remote Sync , tap the Sync button.When ready, the Task status column show today´s date for all successfully synchronized items.Backing up dataYou can use the P800 Backup and Restore PC software to back up the contents stored in your smartphone to your computer. Keeping backups of your smartphone´s contents on your computer means that you have a separate copy of the contents of the smartphone, which can be restored into the smartphone. Backups should be done on a regular basis, a backup reminder can be set.See the online help for P800 Backup and Restore for more information on how to use the program.PreconditionsThe PC Suite for P800 must be installed in the PC and the smartphone must be connected to the PC via cable. Note Backup and restore does not work via IR or BluetoothPerforming a backupTo make a backup1. Connect your smartphone to the PC via cable.2. In the PC, go to Start menu > Programs > Sony Ericsson > P800 > P800 Backup and Restore.P800_UM.book Page 151 Thursday, July 11, 2002 10:58 AM
152Preliminary3. Select smartphone, several can be registered.4. Start Backup and select media: smartphone and/or Memory Stick.Backup begins, the progress is shown in the smartphone.5. Follow the instructions in the smartphone.6. Backup is complete.Restoring dataIf you have lost data or accidentally deleted information in your smartphone you can restore an earlier backup. A backup from a certain memory type (phone memory or Memory Stick) can only be restored to the same type. To restore a backup1. Connect your smartphone to the PC via cable.2. Go to Start menu > Programs > Sony Ericsson > P800 > P800 Backup and Restore in the PC.3. Select smartphone, several can be registered.4. Select one of the backups in the list of previously saved backups and click Restore.Restore begins, the progress is shown in the smartphone.5. Follow the instructions in the smartphone.6. Restore is complete.Warning! Everything in your smartphone will be overwritten by the chosen backup. Once you have clicked Yes to start the restore, you cannot cancel the procedure.P800_UM.book Page 152 Thursday, July 11, 2002 10:58 AM
153Getting started with Getting started with Getting started with Getting started with Getting started with Internet and MessagesIntroduction Before you can use Internet and Messages to access the Internet and send or receive messages you will need to make some user-specific settings in the Control panel. Service providerYou will need a service provider to connect your smartphone to the network.The service provider could be:• An internet service provider (ISP) which connects you to the internet.• An access point provided by your network operator.• A private service provider such as your company or your bank. You will need to enter specific service provider details into your smartphone to set up an Internet account. It can hold the details of multiple service providers, for example, you may have separate internet and corporate accounts. Your network operator or retailer may have pre-installed services, check with them.Connection typeWhen your smartphone connects to a service provider, it will use a GSM or GPRS network provided by a network operator. Many network operators offer both GPRS and GSM services.The connection type defines which network your account uses to connect to the Internet. GPRS Internet accounts use the GPRS network, and dial-up Internet accounts use the GSM network. GPRSIf your network operator supports GPRS, a GPRS Internet account allows you to:• Remain permanently connected to the Internet without being charged for connection time. With a GPRS account, you are charged for the amount of information you view, download or send when your are connected to the Internet.Check your operator for details of your subscription.• Avoid having to reconnect to the Internet if the connection is broken.Dial-upFor both dial-up and high-speed dial-up accounts, you are charged for the length of time you are connected. If your network operator supports them, you can increase your connection speed (at a cost) by setting up a high-speed account.P800_UM.book Page 153 Thursday, July 11, 2002 10:58 AM
154PreliminaryAutomatically set up service provider and MessagingThe easiest way to set up your smartphone is automatically, through your service provider.For Messages settings your smartphone supports automatic setup of:• e-mail accounts• MMS (Multimedia Messaging Service) settings.Check your service provider’s web site for information or contact their support desk and ask about automatic remote configuration of ISP (Internet Service Provider) settings, e-mail and MMS settings.If remote configuration is possible, they will send you the auto configuration messages required by SMS.Settings valid for your network operator and one or more of these services may also be available through the phone configurator utility at www.sonyericsson.comTo check that your SMS messaging settings are correct:1. Select Control panel > Connections > Messaging accounts > SMSAccepting new Internet or Messages settingsNew configuration messages will appear in the Auto setup account inbox of Messages (Configuration messages for e-mail accounts will, however, be found in yourSMS inbox.)When an auto setup message appears, select it.A dialogue with a brief text and operator message appears on the display. You can accept the new settings or leave the message in the inbox.If the name of the new account is the same as that of an existing account you can choose to create a new account with the same name or replace the existing account.Warning! Never accept remote configuration messages if you are not expecting them or are unsure where they have come from.Manually set up service provider Alternatively to setting up an Internet account automatically, you can enter the settings manually from Internet accounts on the Connections tab of the Control panel.First collect all the information you will need. You can obtain this information from your ISP (Internet Service Provider), or if you are connecting to a corporate network, your IT Manager.P800_UM.book Page 154 Thursday, July 11, 2002 10:58 AM
155Getting started with Getting started with Getting started with Getting started with PreliminaryAll settings are described in “Internet accounts” on page 119.To set up a new account follow the steps under “To create a new Internet account:” on page 120Manually set up MessagesAlternatively to setting up Messages automatically, you can enter the settings for the messaging services you want to use yourself from Messaging accounts on the Connections tab of the Control panel. First collect all the information you will need. You can obtain this information from the following sources:• If your mobile operator offers an e-mail service you can get the necessary details from them. • Your internet service provider.• Your IT Manager in the case of connecting to the corporate network to access your work e-mail account.• Your network operator in the case of SMS and CBS services.The dialogue has four tabs, one for each type of messaging service:E-mailThe provider of your e-mail service, or for a corporate account, your IT Manager. can provide you with the necessary details.All settings are described in “Email tab” on page 125.To set up a new account follow the steps under “To create a new e-mail account:” on page 125.SMSShort Message ServiceThe necessary settings are usually provided on your SIM card. All settings are described in “SMS tab” on page 126.MMSMultimedia Messaging Serviceyour MMS messaging provider will be able to provide you with the necessary information.Before you set up MMS messaging you need to set up an Internet account in Control panel > Internet accounts and a WAP account in Control panel > WAP Accounts All settings are described in “MMS tab” on page 127CBSCell Broadcast Service: Area and Cell informationYour network operator will be able to inform you if these services are available.All settings are described in “CBS tab” on page 129P800_UM.book Page 155 Thursday, July 11, 2002 10:58 AM
156PreliminarySetting up WAP accountsA WAP account defines a service provider and gateway that should be used when making a connection to WAP services. You also need a WAP account when you use MMS (Multimedia Messaging Service).The WAP gateway sits between your smartphone and the WAP site coding and decoding information. You can set up details of more than one gateway if necessary, for example one for your MMS messaging, one to access corporate data over WAP, and another to access your bank's WAP service.The easiest way to set up a WAP account on your smartphone is automatically, through your service provider. Check your service provider’s web site for information or contact their support desk and ask about automatic setup. Note You access WAP pages through an Internet Service Provider (ISP) so, when you create a WAP account, you must choose one of your existing Internet accounts or first create a new one.Manually set up a WAP accountAlternatively to setting up a WAP account automatically, you can enter the settings manually from WAP Accounts on the Connections tab of the Control panel.First collect all the information you will need. You can obtain this information from the WAP service provider, or if you are connecting to a corporate network, your IT Manager.All settings are described in “WAP accounts” on page 133.To set up a new account follow the steps under “To create a new WAP account:” on page 133Using your smartphone as a modemYour smartphone contains a complete GSM/GPRS modem, so you can use it to connect your PC to the internet or corporate intranet.Your smartphone appears to the laptop like a normal modem.P800_UM.book Page 156 Thursday, July 11, 2002 10:58 AM
157Getting started with Getting started with Getting started with Getting started with PreliminaryYou link the laptop to your smartphone using Bluetooth infrared, or cable (USB or serial).The connection over the air can be by any of the bearers that your smartphone supports: •GPRS• HSCSD (High-speed Circuit Switched Data• CSD (Circuit Switched Data). A Windows modem driver file and a PC utility, the Dial-Up Networking Wizard is provided on your PC suite for P800 CD. The wizard will help you configure DUN (Dial-Up Networking) entries on your PC for GPRS and HSCSD connections.Once paired with a Bluetooth-enabled laptop, your smartphone is ready to make a connection to the Internet or corporate network. Because Bluetooth is wire-free and requires no line-of-sight alignment, you can place the laptop in a comfortable position and let your smartphone remain in your pocket, briefcase, or even be placed up to 10 metres away.If you wish to use an infrared link the range is typically up to 1 metre. The two infrared 'eyes' must be kept in line of sight, at an angle of no more than approximately 30 degrees.The Dial-Up Networking WizardThe wizard simplifies creating GPRS DUN connections by setting the proper values in the PC DUN entry and linking the entry to one of the GPRS configurations in your smartphone. You can also view and modify the GPRS settings in the smartphone.For HSCSD DUN entries, it updates the modem settings such that the specified data rate and type of bearer (ISDN / Analogue) will be used when you make a DUN connection.You can view or change the DUN entries created with the wizard using the standard Windows DUN user interface. The Dial-Up Networking Wizard software included in the PC suite for P800 must be installed in your PC and your smartphone must be connected to the PC via cable, Infrared or Bluetooth.BluetoothIrDAP800CableGPRS, HSCSDor CSDPersonalComputerP800_UM.book Page 157 Thursday, July 11, 2002 10:58 AM
158PreliminaryYou should have any information on for example phone numbers, name servers or domains that the server you wish to connect to may require available.To set up a GPRS or HSCSD (High-speed Circuit Switched Data) connection using the Dial-Up Networking Wizard:1. Start the Dial-Up Networking Wizard from the Sony Ericsson folder of the Start menu on your PC.2. Choose Create a new dial-up connection3. Follow the instructions in the Wizard.To edit a previously created DUN entry:1. Start the Dial-Up Networking Wizard from the Sony Ericsson folder of the Start menu on your PC.2. Modify a dial-up connection.3. Select the desired connection from the list.4. Follow the instructions in the Wizard.CSD connectionsTo set up a CSD (GSM Data) connection you will need to install your smartphone as a modem manually.To set up a Dial-Up entry for CSD:1. On the PC, open the Control Panel2. Choose to install a new modem.3. Choose your smartphone as the modem.4. Select the port where the smartphone is connected.5. Confirm the selection. A new DUN connection has been created.Connecting To connect using a DUN entry created by the wizard:1. If you are connecting by cable, set your smartphone to Modem cable connection mode.2. Use any conventional method to make a connection: – Click the Desktop shortcut created by the wizard– Select the entry from within the system DUN folder– Run an application that has built-in support for using DUN entries (for example a browser or e-mail client).Secure AccessIf you need access to a network that requires secure access (often known as “strong authentication”), for example a corporate intranet, your can set up the Internet account you use to log in to that network to use secure access and generate the required one-time password when you make the connection.Your smartphone supports the following secure access systems:P800_UM.book Page 158 Thursday, July 11, 2002 10:58 AM
159Getting started with Getting started with Getting started with Getting started with Preliminary• SecureID from RSA• DigiPass from Vasco• SafeWord from Security ComputingIf you have a separate device or application that requires one-time passwords according to one of these systems you do not need a separate hardware token generator. Your smartphone can generate passwords that are not associated with an Internet account.You manage secure access in your smartphone using Secure Tokens: Each token is associated with one vendor/system and with one Internet account (or none, when you use your smartphone as a Hard Token). You can configure as many tokens as needed.To edit, delete, create a new token, or generate a password, tap: Control panel > Connections > Secure tokensInternet Account SettingsA token is associated with an Internet account through the Internet settings for the account:To set up a Dial-up (CSD or High-speed CSD) account for Secure access:1. Tap Control panel > Connections > Internet Accounts2. Create a New or Edit an existing Dial-up account.3. Tap Advanced.4. On the Secure tab for the account select the Enable secure access check box.5. Select the appropriate Vendor and TokenTo set up a GPRS account for Secure access:1. Tap Control panel > Connections > Internet Accounts2. Create a New or Edit an existing GPRS account.3. Tap Advanced4. On the Server tab for the account select the User name and password required check box.5. Enter your User name if desired.If you leave it empty, you will be asked to fill it in at connection time6. Leave the Password box empty.Connecting to an Internet accountFor Dial-up accounts there are two possible ways to connect to a secure access account, depending on if the login procedure uses a script and the PCT (Post Connect Terminal) or not. To connect to a dial-up account that does not require the PCT:1. In the Login dialogue, enter your vendor specific login information in the PIN box.2. Tap Done, the one-time password is generated and passed to the network invisibly.P800_UM.book Page 159 Thursday, July 11, 2002 10:58 AM
160PreliminaryTo connect to a dial-up account using the PCT:1. In the PCT tap Generate.2. In the vendor-specific Generate Passcode dialogue, generate the one-time password3. Tap Copy.4. Return to the PCT, tap Paste to enter the one-time password in the script. 5. Tap DoneTo connect to a GPRS account:1. In the Login dialogue, tap Generate. 2. Select the appropriate Vendor and Token3. In the vendor-specific Generate Passcode dialogue, generate the one-time password4. Tap Copy.5. Return to the Login dialogue, enter your user name if required and tap Paste to enter the one-time password in the Pin box. 6. Tap DoneTip Many dialogue details when using secure access are vendor, system and network specific. You should contact the administrator of the network you wish to access to get the correct information.P800_UM.book Page 160 Thursday, July 11, 2002 10:58 AM
161Trouble shootingTrouble shootingTrouble shootingTrouble shootingTrouble shootingThis chapter consists of an alphabetical selection of suggestions for solving possible problems with your smartphone.Blocked contact card providerThe SIM card is permanently blocked after the unblocking code has been entered incorrectly ten times in a row. Contact your network operator.Card blocked unblock?This message appears if the PIN code has been entered incorrectly three times in a row.To unblock the SIM card:1. Press YES.2. Enter your personal unblocking key (PUK) and press #. Note Your PUK is provided by your network operator when you purchase your SIM card.Enter new PIN appears in the display.3. Enter your PIN code and press #. You can enter either your current PIN code or a new one. Repeat new PIN appears in the display.4. Enter your PIN code again for confirmation and press #.If you entered both your unblocking key and PIN code correctly, the message New PIN appears in the display.Alternative method for unblocking the SIM cardTo unblock the SIM card, enter the following sequence:* 0 5 * unblock key * new PIN * new PIN #Display limitationsIn all cases where numbers or characters exceed the available display space, truncation or dots are used to compensate for this.Numbers are truncated at the beginning, for example ...555666777.Characters are truncated at the end, for example Methusel....Emergency calls onlyA network is within range but you are not allowed to use this network. You may, however, call the emergency number 112.P800_UM.book Page 161 Thursday, July 11, 2002 10:58 AM
162PreliminaryFax callsYour smartphone does not support fax transmission. Even if your operator subscription supports fax transmission, fax calls are rejected. However they can be forwarded to another number such as the office fax number, see “Divert calls” on page 74 for more information.Note Make sure potential fax callers do not try to send a fax to your smartphone as they can experience a number of retries before the fax transmission is stopped.Indicator lightBlinks redThis indicates that the battery is running low and soon needs recharging or replacing with a spare.Note With Vehicle Hands Free (VHF) equipment, make sure that the following are inserted or connected: your smartphone and its holder, the fuse in the fuse holder, and/or the external antenna.Does not blinkIf the indicator light at the top of your smartphone does not blink and no network is displayed then there is not a network within range. See ‘No network is displayed’.Insert cardA SIM card has not been inserted into your smartphone. See “The SIM card” on page 11 for instructions on inserting the SIM card.Key symbolThe keypad is locked to prevent unintentional key action.Press followed by to unlock the keys.Memory/Disk fullDue to memory limitations, your smartphone has no more space available to save or store information.Warning! Make sure regular backups are made with Communications Suite to reduce the risk of lost or corrupted information.To free up memory, erase unused or old:• Call logs.•Contacts.• Messages.• Calendar To-dos or appointments.• WAP history or bookmarks.•Notepad notes.P800_UM.book Page 162 Thursday, July 11, 2002 10:58 AM
163Trouble shootingTrouble shootingTrouble shootingTrouble shootingPreliminaryNo networkThis indicates that no network is within range. The reason for this is either:1. You are in an area that is not covered by a network.2. The received signal is too weak, possibly because you are being shielded from the signal. Move to obtain a sufficiently strong signal. Check your display Signal strength indicator.Phone lockedPhone locked is displayed followed by the prompt Enter lock code.Your smartphone is locked to prevent unauthorized use.To unlock the smartphone:• Enter your personal security code then press # (or YES).PIN & unblocking PUK codeContact your dealer if you have forgotten your PIN or unblocking PUK code. The only way to unlock your smartphone is by using your PIN or unblocking PUK code.Tip Store PIN and unblocking PUK code information in a safe place. For security reasons, it may take some time to unlock the smartphone if this information is lost or misplaced.Start problems• Hand-held phone: Recharge or replace the battery.• Vehicle hands free: Check that the smartphone is properly inserted into the holder and check the fuse in the fuse holder: which is connected to the battery cable.Wrong PINThe PIN code has been entered incorrectly. The message is followed by the prompt Enter PIN.Enter the PIN code correctly and press # (or YES).Note If your PIN is entered incorrectly three times in a row, the SIM card is blocked. You can unblock it by using your PUK.P800_UM.book Page 163 Thursday, July 11, 2002 10:58 AM
164PreliminaryGuidelines for safe and efficient usePlease read this information before using your mobile phone. Recommendations• Always treat your product with care and keep it in a clean and dust-free place.• Do not expose your product to liquid or moisture or humidity.• Do not expose your product to extreme high or low temperatures.• Do not expose your product to open flames or lit tobacco products.• Do not drop, throw or try to bend your product.• Do not paint your product.• Turn your product off in places where posted notices instruct you to do so and in places where mobile phones are prohibited including aircraft and hospitals.• Do not place your product or install wireless equipment in the area above your car's air bag.• Do not attempt to disassemble your product. Only Sony Ericsson authorised personnel should perform service.• If your mobile phone is equipped with infrared, never direct the infrared ray at anyone's eye and make sure that it does not disturb any other infrared units.P800_UM.book Page 164 Thursday, July 11, 2002 10:58 AM
165Guidelines for safe and Guidelines for safe and Guidelines for safe and Guidelines for safe and PreliminaryAntennaOnly use an antenna that has been specifically designed by Sony Ericsson for your mobile phone. Use of unauthorised or modified antennas could damage your mobile phone and may violate regulations, causing loss of performance and SAR levels above the recommended limits (see below).Efficient UseHold your mobile phone as you would any other phone. Do not cover the top of the phone when in use, as this affects call quality and may cause the phone to operate at a higher power level than needed, thus shortening talk and standby times.Radio Frequency (RF) Exposure and SARYour mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements.Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below this value.This is because the mobile phone is designed to use the minimum power required to reach the network. Therefore, the closer you are to a base station, the more likely it is that the actual SAR level will decrease.Variations in SAR below the radio frequency exposure guidelines do not mean that there are variations in safety. While there may be differences in SAR levels among various mobile phones, all Sony Ericsson mobile phone models are designed to meet the relevant guidelines for radio frequency exposure.P800_UM.book Page 165 Thursday, July 11, 2002 10:58 AM
166PreliminaryA separate leaflet with SAR information for this mobile phone model is included with the material that comes with this mobile phone. This information can also be found, together with more information on radio frequency exposure and SAR, on www.SonyEricsson.com/.DrivingPlease check if local laws/regulations restrict the use of mobile phones while driving or require drivers to use handsfree solutions. We recommend that you use only Ericsson or Sony Ericsson handsfree solutions intended for use with your product.Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.Please note that because of possible interference to electronic equipment, some vehicle manufacturers forbid the use of mobile phones in their vehicles unless a handsfree kit with an external antenna supports the installation.Personal Medical DevicesMobile phones may affect the operation of cardiac pacemakers and other implanted equipment. Please avoid placing the mobile phone over the pacemaker, e.g. in your breast pocket. When using the mobile phone, place it at the ear opposite the pacemaker. If a minimum distance of 15 cm (6 inches) is kept between the mobile phone and the pacemaker, the risk of interference is limited. If you have any reason to suspect that interference is taking place, immediately turn off your mobile phone. Contact your cardiologist for more information.For other medical devices, please consult the manufacturer of the device.ChildrenDO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD.P800_UM.book Page 166 Thursday, July 11, 2002 10:58 AM
167Guidelines for safe and Guidelines for safe and Guidelines for safe and Guidelines for safe and PreliminaryDisposing of the ProductYour mobile phone should not be placed in municipal waste. Please check local regulations for disposal of electronic products.Power SupplyConnect the AC power adapter only to designated power sources as marked on the product. Make sure the cord is positioned so that it will not be subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. The AC power adapter must not be used outdoors or in damp areas. Never alter the cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician.Emergency CallsMobile phones operate using radio signals, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any mobile phone for essential communications (e.g. medical emergencies).Emergency calls may not be possible on all cellular networks or when certain network services and/or mobile phone features are in use. Check with your local service provider.Battery InformationWe recommend that you charge the battery for 4 hours before you use your mobile phone for the first time. The battery can only be charged in temperatures between +5°C (+41°F) and +45°C (+113°F).A new battery or one that has not been used for a long time could have reduced capacity the first few times it is used.The talk and standby times depend on usage conditions and network configurations when using the mobile phone. If the mobile phone is used near a base station, less power is required and talk and standby times are prolonged.P800_UM.book Page 167 Thursday, July 11, 2002 10:58 AM
168Preliminary•Warning! May explode if disposed of in fire.• Use only Ericsson or Sony Ericsson branded original batteries and chargers intended for use with your mobile phone. Other chargers may not charge sufficiently or may produce excessive heat. Using other batteries and chargers could be dangerous.• Do not expose the battery to extreme temperatures, never above +60°C (+140°F). For maximum battery capacity, use the battery in room temperature.• Do not expose the battery to liquid.• Do not let the metal contacts on the battery touch another metal object. This could short-circuit and damage the battery.• Do not disassemble or modify the battery.• Turn off your mobile phone before removing the battery.• Use the battery for the intended purpose only.• Keep out of children's reach.• Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic if swallowed.Disposing of the batteryThe battery should never be placed in municipal waste. Please check local regulations for disposal of batteries or call your local Sony Ericsson Customer Care Center for information.Limited warrantySony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony Ericsson), provides this Limited Warranty for your mobile phone and original accessory delivered with your mobile phone (hereinafter referred to as "Product").Should your Product need warranty service, please return it to the dealer from whom it was purchased, or contact your local Sony Ericsson Customer Care Centre (national rates may apply) or visit www.SonyEricsson.com/ to get further information.Our warrantySubject to the conditions of this Limited Warranty, Sony Ericsson warrants this Product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year.P800_UM.book Page 168 Thursday, July 11, 2002 10:58 AM
169Guidelines for safe and Guidelines for safe and Guidelines for safe and Guidelines for safe and PreliminaryWhat we will doIf, during the warranty period, this Product fails to operate under normal use and service, due to defects in design, materials or workmanship, Sony Ericsson authorised distributors or service partners, in the country/region* where you purchased the Product, will, at their option, either repair or replace the Product in accordance with the terms and conditions stipulated herein.Sony Ericsson and its service partners reserve the right to charge a handling fee if a returned Product is found not to be under warranty according to the conditions below.Conditions1. The warranty is valid only if the original proof of purchase issued to the original purchaser by the dealer, specifying the date of purchase and serial number**, is presented with the Product to be repaired or replaced. Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer.2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony Ericsson.3. This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with the Sony Ericsson instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, modification or adjustment, acts of God or damage resulting from liquid.4. Since the cellular system on which the Product is to operate is provided by a carrier independent from Sony Ericsson, Sony Ericsson will not be responsible for the operation, availability, coverage, services or range of that system.5. This warranty does not cover Product failures caused by installations, modifications, or repair or opening of the Product performed by a non-Sony Ericsson authorised person.6. The warranty does not cover Product failures which have been caused by use of accessories or other peripheral devices which are not Ericsson or Sony Ericsson branded original accessories intended for use with the Product.7. Tampering with any of the seals on the Product will void the warranty.P800_UM.book Page 169 Thursday, July 11, 2002 10:58 AM
170Preliminary8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you.The warranty provided does not affect the consumer's statutory rights under applicable legislation in force, nor the consumer's rights against the dealer arising from their sales/ purchase contract.* European Union (EU)If you have purchased your Product in an EU country you can have your Product serviced, under the conditions set out above, within the warranty period in any EU country where an identical Product is sold by an authorised Sony Ericsson distributor. To find out if your Product is sold in the EU country you are in, please call the local Sony Ericsson Customer Care Centre. Please observe that certain services may not be possible elsewhere than in the country of original purchase, for example due to the fact that your Product may have an interior or exterior which is different from equivalent models sold in other EU countries. It may not be possible to repair SIM-locked Products.** In some countries/regions additional information is requested. If so, this is clearly shown on the valid proof of purchase.P800_UM.book Page 170 Thursday, July 11, 2002 10:58 AM
171Guidelines for safe and Guidelines for safe and Guidelines for safe and Guidelines for safe and PreliminaryFCC StatementBefore a phone model is available for sale to the public, it must be tested and certified to the FCC that it not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (i.e. at the ear and worn on the body) as required by the FCC for each model. Body worm measurements are made while the phone is in use and worn on the body with an Ericsson or Sony Ericsson branded original accessory intended for use with the phone. The design and composition of an accessory can affect the body worn SAR (Specific Absorption Rate) levels for the phone. Sony Ericsson has not measured, and make no representation about, the body worn SAR levels when the phone is used with non-Ericsson or non-Sony Ericsson branded original accessories intended for use with the phone.This device compiles with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interface that may cause undesired operation.P800_UM.book Page 171 Thursday, July 11, 2002 10:58 AM
172PreliminaryTerms and definitionsGPRSGeneral Packet Radio Services (GPRS) is a packet-based wireless communication service that promises data rates from 56 up to 114 Kbps and continuous connection to the Internet for mobile phone and computer users. The higher data rates will allow users to take part in video conferences and interact with multimedia Web sites and similar applications using mobile handheld devices as well as notebook computers.HSCSDHigh-Speed Circuit-Switched Data (HSCSD) is circuit-switched wireless data transmission for mobile users at data rates up to 38.4 Kbps, four times faster than the standard data rates of the Global System for Mobile (GSM) communication standard in 1999.BluetoothBluetooth is a computing and telecommunications industry specification that describes how mobile phones, computers, and personal digital assistants (PDAs) can easily interconnect with each other and with home and business phones and computers using a short-range wireless connection.IrDAIrDA (Infrared Data Association) is an industry-sponsored organization set up in 1993 to create international standards for the hardware and software used in infrared communication links. In this special form of radio transmission, a focused ray of light in the infrared frequency spectrum, measured in terahertz, or trillions of hertz (cycles per second), is modulated with information and sent from a transmitter to a receiver over a relatively short distance. Infrared radiation (IR) is the same technology used to control a TV set with a remote controlUSBUSB (Universal Serial Bus) is a plug-and-play interface between a computer and add-on devices (such as audio players, joysticks, keyboards, telephones, scanners, and printers). With USB, a new device can be added to your computer without having to add an adapter card or even having to turn the computer off.RS232A communication port contact/port.SMSShort Message ServiceP800_UM.book Page 172 Thursday, July 11, 2002 10:58 AM
173Terms and definitionsTerms and definitionsTerms and definitionsTerms and definitionsPreliminarySMS (Short Message Service) is a service for sending messages of up to 160 characters (224 characters if using a 5-bit mode) to mobile phones that use Global System for Mobile (GSM) communication.EMSEnhanced Message Service is like SMS only it supports pictures, melodies and formated text.MMSMultimedia Message Service supports photo quality pictures, videos in MPEG format and sonds in WAV or MIDI format.WAP(Wireless Application Protocol) is a specification for a set of communication protocols to standardize the way that wireless devices, such as cellular telephones and radio transceivers, can be used for Internet access, including e-mail, the World Wide Web, newsgroups, and Internet Relay Chat (IRC).SyncMLSyncML is a protocol for universal synchronization of remote and local data. The protocol is sponsored by the SyncML initiative, a group supported by Lotus, IBM and others, which working to create a common protocol for synchronizing data among workstations, network application servers and mobile devices.RSARSA is an Internet encryption and authentication system that uses an algorithm. The RSA algorithm is the most commonly used encryption and authentication algorithm and is included as part of the Web browsers from Microsoft and Netscape. The encryption system is owned by RSA Security. The company licenses the algorithm technologies and also sells development kits. The technologies are part of existing or proposed Web, Internet, and computing standards.WavA Wave file is an audio file format, created by Microsoft, that has become a standard PC audio file format for everything from system and game sounds to CD-quality audio. A Wave file is identified by a file name extension of WAV (.wav).CLIA CLI is a Certified Lotus Instructor???PIMThe SyncML specification is designed to ensure that any device can synchronize PIM data with any other device. Microsoft said SyncML support will be made available through third parties.FCFlip ClosedFOP800_UM.book Page 173 Thursday, July 11, 2002 10:58 AM
174PreliminaryFlip OpenMMLPOP3POP3 (Post Office Protocol 3) is a standard client/server protocol for receiving e-mail. The e-mail is received and held for you by your Internet server. Periodically, you (or your client e-mail receiver) check your mail-box on the server and download any mail.IMAP4Internet Message Access Protocol (the latest version is IMAP4) is a standard client/server protocol for accessing e-mail from your local server. The e-mail is received and held for you by your Internet server. You (or your e-mail client) can view just the heading and the sender of the letter and then decide whether to download the mail.MPEG4The Moving Picture Experts Group, develops standards for digital video and digital audio compression. It operates under the auspices of the International Organization for Standardization (ISO).JPGis a graphic image file created by choosing from a range of compression qualities (actually, from one of a suite of compression algorithms). When you create a JPEG or convert an image from another format to a JPEG, you are asked to specify the quality of image you want. Since the highest quality results in the largest file, you can make a trade-off between image quality and file size. JPEG is an acronym for Joint Photographic Experts Group, the committee that established the baseline algorithms.GIFThe GIF (it stands for Graphics Interchange Format) is one of the two most common file formats for graphic images on the World Wide Web. The other is the JPEG.MP3(MPEG-1 Audio Layer-3) is a standard technology and format for compression a sound sequence into a very small file (about one-twelfth the size of the original file) while almost preserving the original level of sound quality when it is played.MIDIMIDI (Musical Instrument Digital Interface) is a protocol designed for recording and playing back music on digital synthesizers that is supported by many makes of personal computer sound cards.P800_UM.book Page 174 Thursday, July 11, 2002 10:58 AM
175Terms and definitionsTerms and definitionsTerms and definitionsTerms and definitionsPreliminarySMILSMIL (Synchronized Multimedia Integration Language), is a language that allows Web site creators to be able to easily define and synchronize multimedia elements (video, sound, still images) for Web presentation and interaction. SMIL also lets the "producer" store a media object in multiple versions, each with a different bandwidth so that a lower-bandwidth version of a Web page can be sent to users who need it. URL(Uniform Resource Locator) is the address of a file accessible on the Internet. The type of resource depends on the Internet application protocol. Using the World Wide Web's protocol, the Hypertext Transfer Protocol (HTTP) , the resource can be an HTML page (like the one you're reading), an image file, or a Java applet. The URL contains the name of the protocol required to access the resource, a domain name that identifies a specific computer, and a hierarchical description of a file location on the computer. (e g http://www.mhrcc.org/kingston)OTAOver The Air (OTA) (or Over-The-Air) is a standard for the transmission and reception of application-related information in a wireless communications system.SIM-ATA SIM (Subscriber Identity Module) card will assist operators in providing mobile commerce applications.GSMGlobal System for Mobile communication) is a digital mobile telephone system. GSM uses a variation of time division multiple access (TDMA) and is the most widely used of the digital wireless telephone technologies. GSM digitizes and compresses data, then sends it down a channel with two other streams of user data, each in its own time slot. It operates at either the 900 MHz or 1800 MHz frequency band.PTDMeTHTMLHypertext Markup Language is the set of markup symbols or codes inserted in a file intended for display on a World Wide Web browser page. The markup tells the Web browser how to display a Web page's words and images for the user. Each individual markup code is referred to as a tag. Some tags come in pairs that indicate when some display effect is to begin and when it is to end.XMLXML (Extensible Markup Language) is a flexible way to create common information formats and share both the format and the data on the World Wide Web, intranets, and elsewhere. For example, computer makers might agree on a standard or common way to describe the information about a computer product (processor speed, memory size, and so forth) and then describe the product information format with XML.P800_UM.book Page 175 Thursday, July 11, 2002 10:58 AM
176PreliminaryXHTMLXHTML (Extensible Hypertext Markup Language) is "a reformulation of HTML 4.0 as an application of the Extensible Markup Language (XML)." For readers unacquainted with either term, HTML is the set of codes (that's the "markup language") that a writer puts into a document to make it displayable on the World Wide Web.WTLSWireless Transport Layer Security (WTLS) is the security level for Wireless Application Protocol (WAP) applications. WTLS was developed to address the problematic issues surrounding mobile network devices - such as limited processing power and memory capacity, and low bandwidth - and to provide adequate authentication, data integrity, and privacy protection mechanisms.WIMSWIMPIN) A PIN is a personal identification number. PINs are commonly assigned to bank customers for use with automatic cash dispensers. They are also used, sometimes with a security token, for individual access to computer networks or other secure systems.SIThe International System of Units (abbreviated "SI" from the French version of the name) is a scientific method of expressing the magnitudes or quantities of seven important natural phenomena. This system was formerly called the meter-kilogram-second (MKS) system.SLOTAOver The Air (OTA) (or Over-The-Air) is a standard for the transmission and reception of application-related information in a wireless communications system.BMPBitmap. A grahic picture where the are of the picture is divided in a number of pixels. Each pixel represent a color.PIMCSDP800_UM.book Page 176 Thursday, July 11, 2002 10:58 AM
177Terms and definitionsTerms and definitionsTerms and definitionsTerms and definitionsPreliminaryP800_UM.book Page 177 Thursday, July 11, 2002 10:58 AM
178PreliminaryP800_UM.book Page 178 Thursday, July 11, 2002 10:58 AM
179Quick guide for common Quick guide for common Quick guide for common Quick guide for common Quick guide for common tasks[A table with simplified descriptions of the most common actions]P800_UM.book Page 179 Thursday, July 11, 2002 10:58 AM
180Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsGeneral Battery LifeGPRS Maximum Data Rates (kbps)Speed achieved depends on the Coding Scheme supported by the GSM Network.Product nameP800 Standard version, latin characterset) / P802 (Chinese version)Size 117 x 59 x 27 mmWeight 158 grams with battery and flip148 grams with battery, flip removed.System and power classE-GSM 900 Class 4GSM 1800 Class 1GSM 1900 Class 1Antenna Built invSpeech Coding HR, FR, EFR supported where available, for high speech quality.SIM Card Small plug-in card, 3V or 5V typeOperating System Symbian OS v7.0 Based on the 'UIQ' design.Processor ARM 9 User storage For settings, user data (e.g. images, contacts, messages) and third party applications:P800:12MbyteP802: 9Mbyte (dictionary not activated)Standard battery Talk Time:up to 13 hoursStandby time:up to 400 hoursCS-1 9.05kbpsCS-2 13.4kbpsCS-3 15.6kbpsCS-4 21.4kbps4 +Rx 36.2 53.6 62.4 85.6 1 Tx 9.05 13.4 15.6 21.4P800_UM.book Page 180 Thursday, July 11, 2002 10:58 AM
181Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryHSCSD Maximum Data Rates (kbps)ScreenKeypad• 16 hard plastic keys on hinged/removable flip• Jog Dial, 4-way (up, down, towards, away) + select.• Browser button to switch to integrated browser• CommuniCam button - switches to camera viewfinder and acts as shutter.• On-Off button9.6 kbps per timeslot 14.4kbps per timeslot2 + Rx 19.2 28.81 Tx 9.6 14.4Display type TFTDisplay size Flip closed: 208 x 144 pixels, 40 x 28 mmFlip open: 208 x 320 pixels, 40 x 61 mmPixel size 0.192 mmColour resolution 12-bit (4096 colours)Screen surface Touch-sensitive, anti-reflectiveIllumination Front-lightP800_UM.book Page 181 Thursday, July 11, 2002 10:58 AM
182PreliminaryInput MMI LanguagesThird Party Application SupportP800 (Standard version) P802 (Chinese version)Flip ClosedNumeric keypad on flipLatin characters on numberkeysNumeric keypad on flipStrokePinyinBopomofoFlip Open Touch-screenNatural character recognitionOn-screen virtual keyboardTouch-screenChinese character recognitionEnglish character recognitionNumeric character recognitionStrokePinyinBopomofoP800 (Standard version)P802 (Chinese version)Languages loaded; unwanted languages are deleted upon initialisation to free user storage space.Danish (DA), Dutch (NL), English UK, English US, Finnish (FI), French (FR),German (DE),Greek (EL), Italian (IT), Latin American English (R1),Norwegian (NO),Portuguese (PT),Spanish (ES),Swedish (SV),Turkish (TR)Chinese (Simplified, ZS)Chinese (Traditional, ZT)Chinese (Hong Kong, ZH)English UKSDKs C++PersonalJavaTMJ2ME CLDC 1.0/MIDPP800_UM.book Page 182 Thursday, July 11, 2002 10:58 AM
183Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryLoad formats C++ or JavaTM applications in Symbian SIS format.MIDP installation (JAR/JAD) from Browser or connected PCSecurity Support for signed applicationsP800_UM.book Page 183 Thursday, July 11, 2002 10:58 AM
184PreliminaryTelephony Personal OrganiserIntegrated CommuniCamHandsfree options: Built-in Office SpeakerphonePortable HandsfreeBluetooth Headset (optional accessory)Stereo Headset (optional accessory)Picture Phone Book Picture of contact displayed when making outgoing callPicture of caller displayed when incoming call CLI matches entry in Contacts.Personal ringtones Sound clips as personal ringtones.Voice control Voice DiallingVoice AnsweringMagic Word activationUp to 100 voice commands.Other features: Support for calling cardsAccess most applications whilst on a phone callFlight mode, enabling P800 to be used as a PDA in locations where radio transmitters must be switched off. GSM and Bluetooth are switched off when in flight mode.SIM-AT SIM Application Toolkit according to GSM 11.14USSD Incoming and outgoingApplications Contacts (Address Book)Calendar (Diary)Tasks ('To-Do' list)Jotter (Text and 'ink' notes)Voice Memo (Dictaphone)World ClockCalculator (P802 only) English-Chinese-English Dictionary(P802 only) Lunar CalendarImage Size 640 x 480 pixels (VGA)320 x 240 pixels (QVGA) 160 x 120 pixels (QQVGA)Colour depth 24 bit (16.78 million colours)Storage format JPEG/JFIF, 3 quality (compression) levels, user-selectable.Other features Delay timerBrightness and Contrast settingsWhite Balance (4 pre-set values plus automatic)Flicker-free setting (for fluorescent lighting)Backlight mode (when there is light behind the subject)CommuniCam button switches to viewfinder and acts as the shutter.P800_UM.book Page 184 Thursday, July 11, 2002 10:58 AM
185Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryImage ViewerImage EditorVideo PlayerAudio PlayerMessaging: SMSMessaging: EMSMessaging: MMSFormats JPEG, BMP, GIF, MBM, PNG, WBMPSharing via IR, Bluetooth, MMS, E-Mail, PC file transferUsage The Image Editor is available when composing MMS messages.Functions Crop, Rotate, RescaleElectronic ink (draw on picture) Colour, pen size, eraser functionFile Format .MP4 (MPEG4)Streaming transport RTSP according to 3GPPVideo coding MPEG-4 Simple Visual Profile Level 0H263 Profile 0 Level 10H263 Profile 3 Level 10Audio coding AMR; AAC File Format .MP3, WAV, AU, G-MIDI and AMRClasses 0, 1 and 2Bearer GSM and GPRSBroadcast Basic & Extended channelConcatenated up to 255 messagesStandards compliance 3GPP 23.040 Version 4Supported objects Sounds, Melodies, Pictures, AnimationsImage editor User may create and edit icons (16x16 and 32x32 pixels)Image formats GIF, JPG, BMP, WBMP, PNGAudio format AMR, WAV, iMelodyPresentation SMILConformance 3GPP 23.140 V5.0Nokia/Ericsson 'MMS Conformance Document V2.0.0'P800_UM.book Page 185 Thursday, July 11, 2002 10:58 AM
186PreliminaryMessaging: E-MailDocument ViewersIntegrated browser technical dataM-ServicesCompliant with M-Services specification, Phase 1Incoming mail server support POP3, IMAP4Outgoing mail server support SMTPContent coding MIME compliantAttachment Viewers VCard, vCal, Document viewers as belowOther features Automatic download of messages over GPRS 'always on' connectionOn-board Microsoft® WordMicrosoft® ExcelMicrosoft® Powerpoint®Adobe® Acrobat® (PDF)Supplied on CD-ROM Over 20 further formatsMarkup Languages HTML 3.2 (excluding features not relevant to a small screen device)WML 1.2.1WBXMLxHTML BasicxHTML Mobile ProfilecHTMLWAP v er s ion 2. 0Scripting Compiled WML scriptsStyle sheets WCSSImages WBMP, GIF (including animated), JPEGBearer GPRS, HSCSD, CSDSecurity WTLS Class 1, 2, 3TLS/SSLCertificates Pre-install & downloadWTLS, X509WIM WIM interface including SIM-WIM (SWIM)Bookmark import/exportIrDA, Bluetooth, SMS, MMS, E-MailBookmarks Yes, number only limited by available user storageHome Page YesCache 15 - 120kbyte user-configurable; 30kbyte default.Clear cache function YesHyperlinks Underlined in textImage according to Style Sheet.WAP Accounts(WAP Profiles)Yes. Integrated with bookmarks.Quantity only limited by available user storage.OTA Support Ericsson/Nokia OTAWAP Forum ProvisioningP800_UM.book Page 186 Thursday, July 11, 2002 10:58 AM
187Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryMeTCompliant with MeT specification, version 1.0P800_UM.book Page 187 Thursday, July 11, 2002 10:58 AM
188PreliminaryUser Customisation Bluetooth Wireless TechnologyWallpaperFC onlyJPEG, GIF, BMP, WBMP208 x 320 pixels wallpaper image size.208 x 144 pixels visible area with flip closed.Screen saver FC and FOJPEG, GIF, BMP, WBMPAnimated GIF supported; note that animation uses more power.208 x 320 pixels FO image size208 x 144 pixels visible area with flip closed (same image as FO)Ring tonesAlarm tonesiMelodyWAV, AU, AMR. Recommended format for WAV files is PCM, 22,050Hz, 8 bit, Mono, often called 'radio quality'Application selection Application available via FC on-screen icons.Applications available from Application Picker in FO mode.Bluetooth compatibility statementThis product is manufactured to comply with the Bluetooth spec. 1.1.Coverage area Up to 10 metres (33 feet)Bluetooth functions Generic Access Profile Serial Port ProfileGeneric Object Exchange ProfileDialup Networking Profile Object Push Profile Headset ProfileP800_UM.book Page 188 Thursday, July 11, 2002 10:58 AM
189Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryInfrared Transceiver Remote SynchronisationLocal SynchronisationPC Connectivity Solutions• Drag-and-drop file transfer between the P800 and the PC. ^(e.g. Word documents, JPEG images)• Backup and Restore of user data and settings• Load new application• Change MMI Language• Use P800 as wireless modem. SecurityData transmission rate Max speed between phone and IrDA device (e.g. PC, another phone) SIR: up to 115,200 bpsData ContactsCalendarTasksBearer HTTPProtocol SyncMLData ContactsCalendarTasksJotter text notesE-MailBearer BluetoothIrDAUSBProtocol SyncMLPC Applications supportedLotus Organizer 5 & 6Lotus Notes 4.6 & 5.0Microsoft® Outlook® 98, 2000, 2002Data protection SIM PIN (at power on)Device Lock (at power on and/or activated by screensaver)Browser TLS, SSL, WTLS, Certificate handlingThird party applicationsSupport for signed applicationsIntranet Access SecureID® from RSA SecuritySafeWord from Secure ComputingDigiPass from VascoP800_UM.book Page 189 Thursday, July 11, 2002 10:58 AM
190PreliminaryRemote ConfigurationLocation Based ServicesMobile-assisted E-OTD positioning according to FCC E-911 Phase 2Ericsson/Nokia OTA Settings specificationWAP Account (Account name and WAP Gateway information)ISP Settings (Bearer information, username, password)Bookmark (name and URL)SyncML settingsMMS SettingsWAP Forum specifications WAP AccountISP SettingsBookmarksSmart Messaging SpecificationISP Settings E-Mail account P800_UM.book Page 190 Thursday, July 11, 2002 10:58 AM
191Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical SpecificationsPreliminaryP800_UM.book Page 191 Thursday, July 11, 2002 10:58 AM
192Demo ApplicationDemo ApplicationDemo ApplicationDemo ApplicationDemo ApplicationThe Demo application shows a slide show of some functions of the smartphone:• How to send and receive messages• How to find a contact and make a call• How to take a picture and send it• How to personalize the phone and handle short-cutsTo start the Demo1. Select the Applications icon 2. Select the demo icon 3. The demo is startedTo sto p t he Demo1. Any input will stop the demo. The demo is also stopped at:– An incoming call– An incoming SMS/EMS/MMS messageP800_UM.book Page 192 Thursday, July 11, 2002 10:58 AM
193Demo ApplicationDemo ApplicationDemo ApplicationDemo ApplicationPreliminaryP800_UM.book Page 193 Thursday, July 11, 2002 10:58 AM
194Document ViewerDocument ViewerDocument ViewerDocument ViewerDocument ViewerDocument viewer is an application used to view various types of documents:• Word processing documents• Spreadsheets•Drawings• PDF documents• Presentations•ArchivesDocument viewer has two views in open mode:Except from the list view, a document can also be opened from another application, e.g. by selecting a appended document in an e-mail.The functions available differ depending on the document type. General functions are similar between the document types and are therefore described separately.General functionsIn all views there is a menu bar from where you can access some of the functions. This section describes the functions that are common for all document types.List view An alphabetical list of files, for selecting a file to view.File view The contents of a file, for viewing and manipulating the file.P800_UM.book Page 194 Thursday, July 11, 2002 10:58 AM
195Document ViewerDocument ViewerDocument ViewerDocument ViewerPreliminaryList view Detail view To open a document from an e-mail1. Select the document link.2. The document viewer is started, showing the file view of the document.To save the docuent in the smartphone1. Select Document > Save from the menu.2. Select where to save the document and select Save.To open a document from the list view1. Select the Application launcher icon .2. Select the Document viewer icon .3. If required, change folder.Menus Option DescriptionViewer Find file Search files with a name conatining a specific text.EditSort by name Sort the file list by name.Sort by size Sort the file list by file size.Zoom Set zoom level, small, medium or large.FoldersAll Show all files in the list.Unfiled Show the files that is not in a folder.Edit folders Categorize your files in folders (for example business or personal).Menus Option DescriptionDocumentRename Rename the document.Send as Send a document as e-mail, MMS, IR or Bluetooth.Save (if opened from another application) Save the document in the smartphone.Delete Delete the active document.Properties Show information on the active document.EditCopy to (if opened from the Document viewer only)Copy the document to another location, for example memory stick in the smartphone.Zoom in Increase the view of the file.Zoom out Decrease the view of the file.Restore Restore to the original size.FoldersUnfiled Show the contacts that is not in a folder.Edit folders Categorize your documents in folders (for example business, personal etc.).Menus Option DescriptionP800_UM.book Page 195 Thursday, July 11, 2002 10:58 AM
196Preliminary4. Scroll to the desired file and select the file name.The document is shown in the File view.To save the document to a different location1. Select Edit > Copy to from the menu.2. Select where to save the document and select Save.Functions specific for different document typesWhen a document is opened, the type is indicated by the name of the first menu, for example Spreadsheet. Detail view - Document To copy text from the document1. Select the text to be copied. To select all text in the document, select Edit > Select all.2. Select Edit > Copy.3. The text is put into the clipboard and a message is displayed.Spreadsheet Edit Unfiled Menus Option DescriptionDocument Find Search the document for a specific text.Find next Search for the next occurence of the search text.Clear search hits Remove the search hits.EditCopy Copy the selected text or elements of the document.Select all Select the contents of the entire document.Draft view Display the document as formatted text without graphics, adapted to the screen.Normal view Display the document as formatted text including graphics, adapted to the screen.Page view Display the document in print preview, showing the complete layout.P800_UM.book Page 196 Thursday, July 11, 2002 10:58 AM
197Document ViewerDocument ViewerDocument ViewerDocument ViewerPreliminaryTo search for a text in the document1. Select Document > Find from the menu.2. Enter the text to search for.3. Select find.4. If required, select Document > Find next.5. To clear the highlighted search hits, select Document > Clear search hits.To change the document view1. To display the document as formatted text without pictures, wrapped to the screen size, select Edit > Draft view.2. To display the document as formatted text including pictures, wrapped to the screen size, select Edit > Normal view.3. To display the complete layout of the document, select Edit > Page view.P800_UM.book Page 197 Thursday, July 11, 2002 10:58 AM
198PreliminaryDetail view - Spreadsheet To copy text from the document1. Select the text to be copied. To select all text in the document, select Edit > Select all.2. Select Edit > Copy.3. The text is put into the clipboard and a message is displayed.To search for a text in the document1. Select Document > Find from the menu.2. Enter the text to search for.3. Select find.4. If required, select Document > Find next.5. To clear the highlighted search hits, select Document > Clear search hits.To change the document view1. To display the document as formatted text without pictures, wrapped to the screen size, select Edit > Draft view.2. To display the document as formatted text including pictures, wrapped to the screen size, select Edit > Normal view.3. To display the complete layout of the document, select Edit > Page view.To show/hide the spreadsheet grid lines1. Select Edit > Show gridlines.Menus Option DescriptionSpread-sheet Find Search the document for a specific text.Find next Search for the next occurence of the search text.Clear search hits Remove the search hits.EditCopy Copy the selected text or elements of the document.Select all Select the contents of the entire document.Draft view Display the document as formatted text without graphics, adapted to the screen.Normal view Display the document as formatted text including graphics, adapted to the screen.Page view Display the document in print preview, showing the complete layout.Show gridlines Turn the gridlines on/off.Next sheet Open the view of the next sheet in the workbook.Previous sheet Open the previous sheet in the workbook.P800_UM.book Page 198 Thursday, July 11, 2002 10:58 AM
199Document ViewerDocument ViewerDocument ViewerDocument ViewerPreliminaryTo navigate in the workbook1. To go to the next sheet in the workbook, select Edit > Next sheet.2. To go to the previous sheet in the workbook, select Edit > Previous sheet.Detail view - Drawing To search for a text in the document1. Select Document > Find from the menu.2. Enter the text to search for.3. Select find.4. If required, select Document > Find next.5. To clear the highlighted search hits, select Document > Clear search hits.To navigate in a multi page drawing1. To go to the next slide in the drawing, select Edit > Next slide.2. To go to the previous slide in the drawing, select Edit > Previous slide.Detail view - Archive To extract documents from an archive1. To open a file for viewing in the Document viewer, select the file and select Edit > Open.2. To extract a file and save it in the selected folder, select Edit > Extract.3. To extract all files in the archive and save them in the selected folder, select Edit > Extract all.Menus Option DescriptionDrawing Find Search the document for a specific text.Find next Search for the next occurence of the search text.Clear search hits Remove the search hits.EditNext slide Open the view of the next slide in multi page documents.Previous slide Open the view of the previous slide in multi page documents.Menus Option DescriptionEditOpen Open the selected file for viewing in a Document viewer window.Extract Extract the selected file to be saved in a selected folder.Extract all Extract all the archive files to be saved in a selected folder.Sort by Allow the user to view files in an archive by name, date, or size.Sort order Allow the user to view files in ascending or descending order.P800_UM.book Page 199 Thursday, July 11, 2002 10:58 AM
200PreliminaryTo change the archive sort order1. To sort the documents by name, date or size, select Edit > Sort by and select as desired.2. To change between ascending and descending order, select Edit > Sort order.P800_UM.book Page 200 Thursday, July 11, 2002 10:58 AM
201Document ViewerDocument ViewerDocument ViewerDocument ViewerPreliminaryP800_UM.book Page 201 Thursday, July 11, 2002 10:58 AM
202PreliminaryVideo playerYou can view video clips that you have saved in your smartphone. The video clips can be downloaded in the smartphone from an Internet site or transferred from a computer via a cable. It is also possible to send these video clips to other phones or pc´s, via infrared communication, Bluetooth wireless technology and MMS.The video player supports the MPEG4 file format.To download a video1.To view a video clip1. Select Applications > Video.2.To send a video clip1.To delete a video clip1.To rename a video clip1.1.P800_UM.book Page 202 Thursday, July 11, 2002 10:58 AM
203PreliminaryBBatteryinsertion 10removal 11PProblemcard blocked 161display 162emergency calls only 161fax calls 162inset card displayed 162memory/disk full 162no indicator light 162no network 163phone locked 163red indicator light 162screen 162security code 162starting 163wrong PIN displayed 163SSecurityproblems 162P800_UM.book Page 203 Thursday, July 11, 2002 10:58 AM

Navigation menu