SparkLAN Communications WUBR507N 802.11abgn Wireless USB Module User Manual WUBR 507N LFG QIG English 20120406

SparkLAN Communications, Inc. 802.11abgn Wireless USB Module WUBR 507N LFG QIG English 20120406

Users Manual

WUBR-507N(LFG) 802.11a/b/g/n USB Module Quick Installiaton Guide Version 1.0
1 Contents 1. Package Contents........................................................................................................... 3 2. WLAN Adapter Quick installation Guide.......................................................................... 4 3. Network Card Installation................................................................................................ 4 4. Connect to Wireless Access Point .................................................................................. 9
2 Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. November 2010
3 1. Package Contents Before you starting to use this wireless network card, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: Package Contents Please make sure you have the following in the box: ♦ WUBR-507N(LFG) USB Module ♦ Driver / QIG CDROM Note: if anything is missing, please contact your vendor
4 2. WLAN Adapter Quick installation Guide Please follow the following instructions to use Ralink config utility to connect to wireless access point. 3. Network Card Installation 1. Install the WUBR-507N(LFG) USB Module into your computer. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again.
5 2. If he following message appear on your computer, click ‘Cancel’. 3. Insert the Driver CD then wait for the Autorun prompt.
6 4. If Autorun does not work, please browse the CD content and double click the “Autorun.exe”. 5. Click the “Driver” for beginning the installation. 6. Click “Next” and then follow the instructions on the screen to continue the installation.
7 7. When you see this message, please click “Finish” to complete the driver installation process.
8
9 4. Connect to Wireless Access Point 1. After installation is complete, a small Ralink icon appears in the notifications area of the taskbar. You can double click it to maximize the RaUI dialog box. 2. When starting RaUI, the system will connect to the AP with best signal strength without setting a profile or matching a profile setting. When starting RaUI, it will issue a scan command to a wireless NIC. After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list includes most used fields, such as SSID, network type, channel used, wireless mode, security status and the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is shown below. You could click the two buttons which red arrow pointed to open the “Site Survey” and “Link Information” page to show detail information. 3. You could follow the steps to connect to the AP which you want to connect (Example to
10 Configure Connection with WPA2-PSK). a. Select the AP and click “Connect” icon . b. Authentication/Encryption function appears.
11 c. Select WPA2-PSK as the Authentication Type. Select TKIP or AES encryption. Enter the WPA Pre-Shared Key. d. Click "OK". Be careful, if the WPA Pre-Shared Key entered is not correct, you won’t be able to exchange any data frames, even though the AP can be connected.
12 4. At last, if you want to know more using method of RaUI, you could refer to the help file by click the question mark at the top right corner of RaUI to open it.
www.sparklan.com / sales@sparklan.com / +886-2-2659-1880 WUBR-507N (M) Latest 802.11n Wi-Fi Technology SparkLAN WUBR-507N(M) is an 802.11n Wi-Fi USB module, which is backward compatible with 802.11a/b/g standard. With advanced 2T2R MIMO technology, WUBR-507N(M) delivers ultimate wireless data rate for up to 300Mbps. It is designed properly for any wireless enabled devices with standard 6-Pin connector USB Type A (optional). Secure Wireless Connection WUBR-507N(M) also features advanced WEP encryption, WPA, and WPA2 to help to protect data over wireless communication without sacrificing the performance. ■ Chipsets: Ralink RT3572 ■ Compliant with 802.11a/b/g/n Dual-Band standard ■ Interface: 6-Pin or USB 2.0 Type A (optional) ■ Antenna: 2 x U.FL connector ■ Speeds up to 300Mbps ■ Advanced security: 64/128-bits WEP, WPA, WPA2 ■ Support Windows 2000/ XP/ Win CE/ Vista/ Win7, Linux, MAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Feature 802.11a/b/g/n USB Module 6-Pin or Type A Connection with Ralink RT3572, 2T2R Mechanical Dimension (mm) Application ■ Networking Equipment ■ USB Dongle ■ Industrial Computers ■ Medical Device ■ POS (Point-of-Sale) System ■ Self-Service KIOSK ■ Gaming Machine ■ Consumer Electronics
www.sparklan.com / sales@sparklan.com / +886-2-2659-1880 WUBR-507N (M) Specifications Ordering Info - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -■ WUBR-507N(M) 802.11a/b/g/n USB Module WUBR-507N(M) U.FL+6-Pin WUBR-507N(MU) U.FL+USB Type A WUBR-507N(P) Printed Antenna +USB Type A WUBR-507N(P6) Printed Antenna +6-Pin Related Product ■ WUBR-506N 802.11a/b/g/n dual band USB Module ■ WUBR-125GN 802.11b/g/n USB Module Standard 802.11a/b/g/n Chipset Mac/BB/RF Ralink RT3572 Host Interface 6-Pin Connector (Pin 1: v+, Pin 2: D-, Pin 3: D+, Pin 4: GND, Pin 5: LED, Pin 6: RF) or Type A (optional) Radio Antenna 2 x U.FL connector (2T2R) Operating Frequency 802.11a ISM Band: 5.1 ~ 5.8GHz 802.11g ISM Band: 2.4 ~ 2.4835GHz Modulation 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Output Power 802.11a: 11dBm ± 1.5dBm@54Mbps 802.11b: 16dBm ± 1.5dBm@11Mbps 802.11g: 13dBm ± 1.5dBm@54Mbps 802.11an HT20: 10dBm ± 1.5dBm 802.11an HT40 : 10dBm ± 1.5dBm 802.11gn HT20: 12dBm ± 1.5dBm 80.211gn HT20 : 12dBm ± 1.5dBm Receive Sensitivity 802.11a: -72dBm ±2dBm 802.11b: -86dBm ±2dBm 802.11g: -72dBm ±2dBm 802.11an HT20: -68dBm ±2dBm 802.11an HT40 : -65dBm ±2dBm 802.11gn HT20: -68dBm ±2dBm 802.11gn HT40 : -65dBm ±2dBm Power consumption Continue TX Max 400mA@2TX Continue RX Max 250mA@2RX Operating Voltage DC 5V ± 10% Environmental Temperature Range 0 ~ 60°C (Operating) -20 ~ 70°C (Storing) Humidity (Non-Condensing) 5 ~ 90% (Operating) 5 ~ 95% (Storing) Physical Specification Dimensions 60mm X 25mm (±0.5mm) Weight TBD Software Driver Windows 2000/XP/ WinCE/ Vista,/ Win7, Linux, MAC Security 64/128-bits WEP, WPA, WPA2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e quipment gene rates, uses and can radiate radio frequ ency energy and, i f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna.z Increase the separation between the equipment and receiver.z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.z Consult the dealer or an experienced radio/TV technician for help.FCC Caution : Any changes o r modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted to indoor use. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RYK-WUBR507N ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
This radio transmitter FCC ID: RYK-WUBR507N has been approved by Federal Communication Commission to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Ant. Antenna Type Model Peak Gain (dBi) 1 Dipole C642-510049-A(SSR-12024)(X4) 2.4G 25G 22 Printed N/A 2.4G 1.785G 3.33

Navigation menu