SparkLAN Communications WUBR507N 802.11abgn Wireless USB Module User Manual Phase One 645 DF and IQ Digital Back Users Guide

SparkLAN Communications, Inc. 802.11abgn Wireless USB Module Phase One 645 DF and IQ Digital Back Users Guide

UserManual.wiki >

SparkLAN Communications >

WUBR507N User Manual >

WUBR-507N_UserMan_2 HTML Version

WUBR-507N_UserMan_2

100

9.0 Advanced 645DF+ Camera Functions

9.1 Exposure Compensation

In situations providing extreme high contrast, the resulting photograph may

be under or overexposed. When this occurs, use the Exposure Compensation

function. Exposure Compensation can also be used when you want to

intentionally create overexposed or underexposed pictures.

N.B. Creating an under or overexposed image can also be eectivity achieved

with the High Dynamic Range Tool and Exposure Tool in Capture One.

The exposure compensation dial icon:

1. Press the Exposure Compensation button [A] so that icon appears on the

camera’s top LCD. When the front or rear dial is turned counter-clockwise, the

exposure is increased and when it is turned clockwise, it is decreased. The

exposure compensation value can be checked on the external LCD or LCD

inside the viewnder.

2. After taking the pictures, press the Exposure Compensation button

[A] again to return the exposure compensation value to 0. The exposure

compensation value mark on the external LCD is cleared and the exposure

compensation function is released.

NOTICE:

After taking pictures using the Exposure

Compensation feature, be sure to return

the exposure compensation dial to the 0

position.

The exposure compensation feature is

available during AE locked operation.

The width of the exposure compensation

step can be changed.

The maximum amount of the compensation

can be set either at ±3 or ±5.

Exposure mode Exposure compensation display

PProgram AE

The set value is displayed

Av Aperture Value Priority

Tv Time Value Priority

MManual Mode

The dierence between the metered

value and the set

Exposure value is displayed

XSync Mode Not displayed

101

9.2 AE Lock

AE lock function is useful in a number of shooting scenarios but is particularly

useful when capturing panoramic images where a consistent exposure is

needed to seamlessly stick images together in post production.

The AEL button will lock the Auto-exposure value as the photo is being

recomposed.

1. Turn the shutter release mode selector lever to S or C.

2. Turn the exposure mode setting dial and select P, Av or Tv.

3. Focus on the subject for metering exposure, and press the AEL button on

the rear of the grip. [ ] Will appear on the viewnder LCD, indicating that

the exposure value is locked.

4. Slide the camera to recompose the shot, and take the picture.

When you press and hold AEL button the over/under exposure value will be

shown to the far right in the viewnder LCD.

NOTICE:

[ ] in the viewnder LCD blinks to indicate

the exposure is locked, when you continue

to take the next picture in the AE lock mode.

If you turn the shutter release mode selector

lever to the L (power OFF) position, or after

elapse of one hour, the AE lock mode will

automatically be cancelled.

In the Manual M exposure mode, you cannot

use the AE lock function.

When the dierence between the metered

value and the set value is displayed, press

the AEL button [A] for approximately one

second, and one-push shift function will be

activated and the camera will automatically

adjust the shutter speed.

102

9.3 Metered-Value Dierence Indicator

Keep pressing the AEL button [A] and the dierence between the metered

exposure value and the exposure of the new composition will be displayed

on the viewnder LCD. This function can be used to see if an object of very

dierent brightness levels can be properly photographed.

If the dierence between the set value and the metered value exceeds

6EV, the viewnder LCD blinks “– u –” for underexposure and “– o – ” for

overexposure.

By turning the front or rear dial in the AE lock mode, you can change the

aperture and shutter speed value without changing the exposure value that

is set when entered into AE lock mode.

In the P mode (Program AE) mode, turning either the front or rear dial shifts

the program to PH and PL. When in Av (Aperture priority AE) or Tv Shutter

priority AE), turning one of the dials changes both the aperture and shutter

speed values.

NOTICE:

The way to cancel the AE lock can be

changed. C-11 AEL function lock/unlock mode

[AEL]

Half-pressing of he shutter release button

can activate the AE lock mode. C-10 Release

button [HALF]

The assignment of the AEL button and AFL

button can be swapped by using C-09 AEL &

AFL button [AEFL]

Exposure compensation and auto-

bracketing function can be used when the

camera is in the AE lock mode in normal

operation or with the mirror locked up.

103

9.4 Auto Bracketing

Auto Bracketing can be used when it is dicult to determine your exposure

compensation value. This function automatically captures dierent exposure

variations in succession. The bracketing margin can be selected as desired

for shooting in Auto Bracketing mode.

1. Turn the Shutter Release Mode Lever to the S or C position.

When set at the S position, you can shoot a single frame with each full press

of the Shutter Release button. In the C mode, the camera takes a series of

three frames successively with one press of the shutter release button.

2. Turn on Auto Bracketing by pressing the Auto Bracketing button[A] for

approximately one second. The Auto Bracketing icon will blink on the top

LCD panel. Turn the front dial (before this indicator times out) and change

OF on the display to On.

3. When the shutter button is pressed in Auto Bracketing mode, the auto

bracketing mark will blink on the LCD inside the viewnder. The bracket step

width is displayed and the Auto Bracketing icon will also blink.

4. To deactivate the bracketing function, press the Auto Bracketing set

button[A], turn the rear dial, set auto bracketing mode to OF, and release.

Then press the Auto Bracketing set button [A] or half-press the shutter button

to return to the normal display mode.

NOTICE:

When you want to cancel the auto-

bracketing mode, turn the rear dial to

change “On” to “OF”

NOTICE:

After multiple turns, the mark [RP] will appear

in the main LCD.

Repeat turning will lead to a countdown

being displayed on the main LCD and after

taking a photo the camera will return to Auto

Bracketing mode.

The setting for the Auto Bracketing will

be stored by pressing any other button or

leaving the camera for 5 seconds.

Underexposure

Bracketing Margin

Overexposure

Auto Bracketing Icon

Standard

Setting selection

104

Single-Frame Mode (S)

Press the shutter release button for each shot. The camera meters adequate

exposure value for each shot and performs Auto Bracketing. The camera

stays in the Auto Bracketing mode until you cancel the Auto Bracketing

mode manually.

Continuous Mode (C)

By pressing the shutter release button once, the camera takes 3 shots in

series. With each full press of the shutter release button, the camera repeats

auto-bracketing. The standard (normal) exposure value will be xed when

you take the rst frame.

Cancelling Auto Bracketing

When you want to cancel the auto-bracketing mode, turn the rear dial to

change “On” to “OF”.

NOTICE:

When exposure compensation is initiated

by pressing the exposure compensation

button, shooting in Auto Bracketing mode

is possible using the exposure value to

which the exposure compensation value

has been added.

Exposure Mode Setting

PProgram AE Shutter speed varies

Av Aperture Priority AE Shutter speed varies

Tv Shutter Priority AE Aperture varies

MManual Mode Shutter speed varies

XX-sync mode No setting

AE Settings Under Auto-bracketing Mode

105

9.5 Taking Photos with the Mirror Up

This function prevents mirror-caused vibrations which may blur an image

when shutter speed is slow. A electromagnetic Cable Release RE401 (optional)

is recommended to use with the mirror-up function.

1. Set the drive dial to M.UP.

2. Select S (single focus mode) by turning the focus mode selector lever.

3. Turn the exposure dial to P, Av or Tv exposure mode.

4. Ensure the subject is in focus and that composition and exposure have

been determined.

5. The mirror moves up when the shutter release button is fully pressed.

6. Press the shutter release button again to take pictures.

In the Manual Mode

Follow steps 1 through 3 of the above auto focusing steps and continue with

the steps below.

1-3 (reference steps 1-3 in the Mirror Up Autofocus method)

4. Set the focus mode selector lever to M (manual focus mode). Turn the

lens-focusing ring to focus.

5. Determine the exposure, focusing and frame structure by pressing the

shutter release button halfway while looking into the viewnder.

6. Lock the mirror up by pressing the shutter release button.

7. Press the shutter release button again to take pictures.

NOTICE:

Auto bracketing exposures can be made

when the auto bracketing mode is set

before taking photos with mirror up.

After 10 seconds, mirror up photography

will be cancelled

The mirror will return to the original

position if the lens is removed from the

camera body

WARNING:

DO NOT point the lens at the sun during the

Mirror Up mode. The sun’s intense light can

scorch and damage the shutter curtain.

M.UP

2.25

0.7

0.8

106

9.6 Mirror Up Delay

To change from the Self-timer to the Mirror Up setting, press the shutter

button so the mirror goes into the upright position. Once the set time

has expired the shutter will release, and the mirror will return to the lower

position. Separately purchased electronic cable release RE401 can be used

to eliminate camera shake.

When using autofocus the operational method is the same as 1 to 3 when

using M.UP and autofocus.

1-3 (reference steps 1-3 in the Mirror Up Autofocus method).

4. Press the Self-timer button and turn the front dial to ON.

5. Turn the rear dial to select the time needed. 0.5/1 seconds to 10 seconds

allows for increases by the second, 10 to 90 seconds increases by 10 seconds

per turn. For 2 to 10 minutes the value by the minute and 10 to 60 minutes

increases by 10 minutes per turn.

6. Line up the photograph through the viewnder and half press the shutter

button to ensure the focus and framing is correct.

7. Full-press the shutter button and the mirror will go to the upper position,

then after the set time the shutter will release and the mirror will return to

the lower position.

Electronic Shutter Release Contact

For Mirror Up, long exposure, or slow shutter shooting, use the magnetic

cable release RE401 or the remote control RS402. The assisting release

contact is to insert the cable.

Eyepiece Shutter

Close the eyepiece shutter when there is a strong light source behind the

camera.

80mm

1:28

107

9.7 Bulb Mode & Long Exposure

To make an exposure longer than 30 seconds, adjust the shutter speed

to “B” (bulb). In order to prevent camera shake, use the RE401 or RS402

electromagnetic shutter release and tripod.

1. Turn the exposure mode dial to M (manual mode).

2. Turn the front dial to select ‘bulb’, then turn the rear dial to set the aperture.

3. Determine the composition, focus and then take the picture. The shutter

remains open as long as the shutter release button is pressed.

Setting Long Exposures

When photographing under normal conditions, the shutter speed can be

adjusted for longer exposures.

Turn the front dial for shooting time settings. New time settings include 1,

bulb, tine(Time), 2, 4, 8, 15, 30, 60.

9.8 Camera Display Light

Press the backlight button[A] to illuminate the top display to see it at night

or in dark places.

The backlight will go on for approximately 20 seconds and turn o unless it

is pressed again.

The backlight will be lit for approximately another 10 seconds when

operating the camera.

NOTICE:

When releasing the shutter, or pressing the

backlight button [A]

while the backlight is on, the backlight will

go OFF.

Choose the time of display light. C-03

Sleeptimer [HOLd]

NOTICE:

As the camera is electronically controlled

even during exposures, it is recommended

to replace batteries before bulb exposure.

NOTICE:

Using “tIME” (Time) setting, the shutter will

open and close according to the number of

times you press it.

“tIME” (Time) photography is electronically

controlled so it is possible that the batteries

will drain quickly. In the case, please replace

the batteries with new ones.

108

9.9 Front/Rear Dial Lock Mechanisms

When the Electronic Dial Lock is On, all currently set values in Av (Aperture

Priority AE), Tv (Shutter Priority AE) and M (Manual mode) cannot be adjusted

with the front or rear dials. This prevents accidental change of shutter speed

or aperture values.

Press down the two lock buttons [A] and [B] at the same time for approximately

one second, until the On indicator blinks.

To release the mode, hold down the same buttons until OF blinks.

is displayed on the main LCD to indicate that operation of the front and

rear dials is locked.

When the dial lock is ON, the shutter speed and aperture will not change

even if you turn the front or rear dial.

When you activate the electronic dial lock, and then operate the electronic

dial, the dial lock indicator on the main panel blinks for three seconds to

show that the electronic dial lock is functioning.

NOTICE:

The setting will be stored after one second.

Dial lock can not be set when the exposure

mode is P (program AE).

Even while dial lock is set, the front dial or

rear dial can still be used to perform the

various settings. (Dial lock is temporarily

released.)

109

9.10 Self-Timer Mode

The default setting for the Self-Timer mode to release the shutter is 10

seconds after the shutter release button is pressed. The self timer lamp

ashes slowly for the rst 7 seconds, and then ashes quickly for the last 3

seconds before the shutter is released. This function can be used to avoid

camera shake, to take group photos or for self-portraiture.

1. Mount the camera on a tripod.

2. Switch the shutter release mode selector to the (self timer mode).

3. Turn the front dial, and set the self-timer mode to ON.

4. Check the view by looking through the viewnder. Make sure that the

focus is correct, press the shutter release button and the shutter will be

released after 10 seconds.

Changing the Self-Timer Duration

1. Press the Self-Timer button to activate this function.

2. Turn the rear dial to change the duration of the Self-Timer. 0.5/1 seconds

to 10 seconds allows for increases by the second, while 10 to 90 seconds

increases by 10 seconds per turn. For 2 to 60 minutes increases by 10 minutes

per turn.

Releasing Self-Timer mode

1. Press the Self-Timer button to activate this function.

2. Turn the front dial to “OF”

Notice:

To release the self timer while it is

operating, turn o the power (by setting

the drive dial to L)

Notice:

In the Self-timer setting, put the drive

dial to M.UP (mirror up) mode. Should

you wish to operate with mirror up and

delay, simply switch the drive dial to

M.UP(mirror up) mode in the Self-timer

setting.

110

9.11 Interval Photography

Interval photography can used for a variety of shooting scenarios such as

such as to capture cloud movement or a ower coming into bloom.

1. Ensure the camera is rmly secured on a tripod.

2. Press and Self-Timer button twice.

3. Turn the front dial to display interval mode as On.

4. Turn the rear dial to set the interval time. Settings include 0 seconds (no

interval time), 1 to 10 seconds (increased by the second), 10 to 90 seconds

(increased in units of 10 seconds), 2 to 10 minutes (increased by the minute)

or 10 to 60 minutes (increased in units of 10 minutes per turn).

5. Turn the front dial to the repeat mode to select how many shots you want

in your interval session, 1-10, or up to 60 in intervals of 10. If you want to

make a motion lm of your session and need more images, try shooting

tethered to a computer and set the interval to ON. The camera will do a shot

until you stop the session. Remember to leave enough free hard disk space

on your computer.

7. Check the focus and framing in the viewnder then press the shutter.

Cancelling Interval Mode

1. Press the interval mode button for interval mode.

2. Turn the front dial to “OF”

Notice:

Repeat turning (according to the number

of times) will lead to a countdown

appearing in the display.

After setting the interval photography,

turn the drive dial to “M.UP” (mirror up

mode) and you can operate in mirror up

delay mode. While photographing in this

setting the “AEL” will be displayed on the

main LCD.

When using auto bracketing, the interval

function cannot be used at the same time.

111

9.12 Depth of Field

Depth of eld (D.O.F.) is dened as the zone of sharpness before and behind

the plane of focus. It depends on distance to subject, focal length of lens,

aperture setting and distance the lens is focused at.

In addition to visual observation via the depth of eld preview button, the

D.O.F. can be determined by using the depth of eld scale on each lens. The f/

stop numbers appear on both the right and left side of the white index mark

in the center of the scale. Simply read the gures which appear above the f/

stop numbers on the distance scale of the lens.

Depth of Field Preview Button

When the preview button is pressed in, the depth of eld for the aperture set

on the camera can be checked by looking through the viewnder.

After focusing, press the preview button. The diaphragm will be stopped

down to the set aperture.

Web Resources

http://www.cambridgeincolour.com/tutorials/depth-of-eld.htm

http://en.wikipedia.org/wiki/Depth_of_eld

NOTICE:

While operating the preview button, you

cannot release the shutter

When the aperture is open (the subject depth is small)

When the aperture is stopped down (the subject depth is large)

1.5

22 2211 114 4

1.51.2 2

54 7

112

9.13 Infrared Photography

Infrared Photography is complicated when using digital backs, as the digital

back is adjusted to match the viewable light perfectly.

Use a dedicated digital back for infrared photography. The IQ back needs to be

adjusted to work properly for infrared photography. DO NOT TRY THIS AT HOME!

– All corrections in this area must be done by Phase One to ensure precision.

If you remove the protective glass or make other physical adjustments on

the back the warranty will immediately be void.

If you are considering Infrared Photography, please contact your local Phase

One dealer for technical advice and pricing.

Infrared light has a slightly dierent area of sharpness compared to the

viewable light so when the distance is set on the lens, you should always

manually correct sharpness, to be in front of the red dot.

Do not use your camera’s light meter when photographing infrared, as the

light meter is aimed towards reading the visible light.

NOTICE:

You cannot take photos in AE modes when

using an infrared lm as the AE is based on

visible light.

113

9.14 Custom Function

The custom functions can store separate three dierent camera set-ups.

When at C-00, chose 1 (A), 2 (B), or 3 (C) to store a specic set of user function

selections for the group of custom settings from C-01 to C-19.

The C-00 is set to 0 which is the settings used for the default set.

Setting Custom Functions

1. Turn on the power.

Turn the shutter release mode lever to the S or C position.

2. Turn the exposure mode dial to select CF (Custom Function mode).

3. Turn the rear dial to select the settings for user A, B, or C.

4. Turn the front dial to select the item you want to set.

Clear all Custom Functions

Set mode dial button to CF, then press +/- button for 5 seconds, this will

reset ALL Custom Functions to the factory default.

Setting Custom Functions to Default

1. By turning the exposure mode dial, CF (custom function mode) can be

selected.

2. By turning the rear dial, user A, B or C can be selected.

3. Press and hold down set button (for longer than 1 second) and settings

for A,B,C can be initialized, or the settings can be returned to “default”.

114

9.15 Types of Custom Functions

C-00 Custom functions prole [SEL]

0: None (default=0)

1: A

2: B

3: C

When “0” has been selected and set, none of the custom items can be set.

C-01 EV-Steps [StEP]

This function is used to set the size of increments concerning the shutter

speed, f-number and exposure compensation value.

0: 0.3 (1/3EV step: default setting)

1: 0.5 (1/2EV step)

2: 1.0 (1EV step)

C-02 Lens change [I rI S]

This function is used to set the f-number display method for the previously

used lens when the lenses have been interchanged. The default setting

is “0” in which case the f-number of the lens prior to the changeover is

displayed.

0: Previous f-number

1: Maximum aperture setting

2: Minimum aperture setting

C-03 Sleeptimer [HOLd]

This function is used to set the time for sleep mode to be established after

the camera’s power is turned on. The default setting is 15 seconds.

0: 15 seconds

1: 30 seconds

2: 60 seconds

3: Disabled

The batteries will continuously lose power when “On” (no sleep mode)

has been set.

C-04 Battery Type [bat t ]

This function is used to set the batteries used in the camera so that the

remaining battery charge will be displayed correctly on the external LCD

panel.

0: Alkaline

1: NiCd, NiMH, Li–ion

2: Li-ION (Only for use with Li-Ion battery Kit or Vertical Grip)

C-05 Bracketing [St no]

Setting bracket’s width for auto bracketing setting

0: 3 Exposures

1: 5 Exposures

2: 7 Exposures

C-06 Front/Rear dial [dF]

This function is used to interchange the functions of the front and rear

dials in the M (manual mode).

0: Front dial: TV, rear dial: Av [OF]

1: Front dial: AV rear dial: Tv [On]

C-07 Rear dial in P mode [d_AC]

Initializing the P mode on the rear dial then changing the function to the

front dial will cancel out P mode function on the rear dial.

0: Enable

1: Disable

C-08 Dial Direction [d_dl]

This function is used to determine the direction in which the electronic dial

is to be rotated to increase and decrease shutter speed, the f-number, and

exposure compensation.

0: CW: Decrease [OF]

1: CW: Increase [On]

C-09 AEL & AFL button [AEFL]

This function is used to set whether to interchange the operations of the

front and rear AEL and AFL buttons.

0: Default setting (front: AFL, rear: AEL) [OF]

1: Switched (front AEL, rear: AFL) [On]

C-10 Release button [HALF]

This function is used to set the AE lock and AF operations when the shutter

release button is half-pressed.

0: AF operation (default setting)

1: AF & AE operation

2: Only shutter release

115

C-11 AEL function lock/unlock mode [AEL]

This function is used to set the method of operating the AEL button to

lock AE. At the default setting, when the AEL button is pressed, AE is

locked; pressing the button again releases the AE lock. At the “1” setting

(released after one shot), after AE lock is set, it is released when the shutter

is triggered. At the “2” setting, AE lock is only kept while the AE lock button

is being pressed.

0: One shot

1: Continuous

2: While pressed

C-12 AFL [AFL]

This function is used to set the AF lock method when the AFL button is

operated. AF >< Lock is activated with one press of the auto-lock button

then deactivated with a second press.

0: While pressed (default setting)

1: AF operation

2: Continuous

C-13 M-mode AEL [OnEP]

When using M (manual mode) one push function, the shutter speed or

aperture value can be set automatically by pressing AEL button.

0: Shutter speed shift [t v]

1: Aperture value shift [Av ]

2: No [no]

C-14 AF assist setting [AF_L]

The AF auxiliary light res automatically when the subject is too dark to

perform AF, but this function can be used to prevent the AF auxiliary light

from ring.

0: On [On]

1: O [OF]

C-15 Flash sync. [FLSY]

When shooting moving subjects with ash you can set the synchronization

timing. This allows you to have the ash re at the beginning of the exposure

or at the end of the exposure.

0: First (default setting)

1: Second

C-16 Beep [bu]

When the SET button is pressed a beep sounds

0: ON (AF) (Default setting)

1: ON

2: OFF

C-17 Shutter TV, AV & P [Sh_P]

When using P, Av or Tv mode and the leaf shutter lens is attached but you

prefer to use the focal plane shutter.

0: Mixed. Default (Focal Plane shutter operation at < 1S)

1: Leaf shutter

2: Focal plane shutter

C-18 Shutter in M & X [Sh]

When initializing the setting, use of the lens shutter (and its respective

ranges) or the focal plane shutter can be chosen when the leaf shutter lens

is attached.

0: Mixed. Default (Focal Plane shutter operation at < 1S)

1: Leaf shutter

2: Focal plane shutter

C-19 AF Priority [AF_2]

Accuracy of auto-focusing priority (default setting) or speed priority can be

decided. Use the front dial to scroll to Custom function 19 and the rear dial

to set AF Priority to one of the following:

00: Speed

01: Accuracy

Please note: On IQ, P 65+ or P 40+ digital backs, this CF function can also

be set from within the digital back menu system: Menu > 645DF > Setup

Custom A > AF priority

C-20 AF Fine Tune

Use the front dial to scroll to Custom function 20. Use the rear dial to ne-tune

the focus point on a subject that is closer or further away from the camera.

50: Neutral factory calibration

Minus: Move AF point closer

Plus: Move AF point further away

116

C-97 Support for Mamiya ZD backs

This function should ONLY be activated when shooting on a Mamiya ZD

back.

0: Default setting NO Mamiya ZD back on the camera body

1: Mamiya ZD back on camera body

C-98 Lens rmware version

The current rmware version can be checked.

C-99 Body rmware version

The current rmware version of the body can be checked.

Liquid Crystal Display

Due to the limitations of the space and letters, words and letters on

the LCD are abbreviated.

Display examples of the main LCD

Display examples in the custom function mode

117

Custom Functions overview

No. Item Initial setting (0) 1 2 3

C-00 Custom Function User Last used User A User B User C

C-01 Steps of aperture, shutter speed,

Exposure compensation

0.3

1/3 EV step

0.5

1/2EV step

1.0

1 EV step

C-02 Aperture setting after lens change Previous aperture value Maximum aperture

setting

Minimum aperture setting

C-03 Time to sleep 15 sec 30 sec. 60 sec. ON

C-04 Battery type Alkaline NiMH or NiCD Future feature

C-05 Auto Bracketing steps 3 5 7

C-06 Front/Rear dial function exchange in manual

mode

Front: TV

Rear : AV

Front:Av

Rear :Tv

C-07 Disable Rear dial in P mode Yes No

C-08 Dial Function direction No switching Switched

CCW : Increase

CW : Decrease

C-09 AEL & AFL button exchange Front: AFL

Rear : AEL

Front: AEL

Rear : AFL

C-10 Shutter half-press function AF operation AF operation &

AE Lock

OFF

(no function)

C-11 AEL function lock/unlock mode Continuous One shot While the shutter button is

pressed

C-12 AFL lock mode setting Set with AF lock only AF operation Continuous

C-13 One push function M-Mode Shutter speed shift Aperture value shift O

C-14 AF assist beam Fires Does not re

C-15 Flash sync. timing Front Curtain Rear Curtain

C-16 Beep ON (AF) ON OFF

C-17 Choose shutter function (P, Av or Tv mode) Mixed. (When inside the range of the

leaf shutter lens)

Only Leaf shutter Only Focal plane shutter

C-18 Shutter function in Manual mode Mixed. (When inside the range of the

leaf shutter lens)

Only Leaf shutter Only Focal plane shutter

C-19 AF Speed High Speed mode High accuracy mode

C-97 Mamiya ZD digital back support NO Mamiya ZD back Mamiya ZD back

C-98 Lens Firmware version

C-99 Body Firmware version

118

9.16 Custom Dial Modes C1, C2 or C3

Mode dial options C1, C2 and C3 can be used to store preferred settings.

These settings can be changed instantly to suit the photographer's needs.

Users can change the settings on the camera body or via an IQ back.

Programmable settings are exposure mode, P (program AE), Av (aperture

priority AE), Tv (shutter speed priority AE), X (synchro mode), M (manual

mode), focus area and spot metering.

Programming the Custom Dial Modes C1, C2 or C3 via the camera body

1. Go to the setting you wish to assign to C1, C2 or C3.

2. After arriving at the setting you wish to assign, hold the SET button down

while turning the mode dial to C1, C2 or C3. When you release the SET button,

the chosen setting will be programmed to your selection of C1, C2 or C3.

C1, C2 or C3 modes can be changed while photographing. However after

taking a photo in a mode other than the modes selected in C1, C2 or C3, when

you turn the dial back to a C mode setting the change will not be saved.

NOTICE:

Even when the power is switched o,

the mode recorded will still be saved to

C mode.

* The illustration shows the exposure mode Av (aperture priority AE)

being recorded to C2.

119

9.17 Lenses and Multi Mount

When it comes to lenses, Phase One provides the widest range of possibilities

to ensure photographers get the most creative freedom from their Phase

One camera.

This chapter looks at some possible lens systems. However, it is worth noting

that there are even more applicable lenses available than presented in the

upcoming pages. User can nd more information from dedicated Phase One

dealers on items such as mount-adaptors for example the Phase One Multi-

Mount.

N.B. Errors or damage caused by third party products are not covered by the

warranty. Please test new products with caution.

9.18 Functions of the Phase One Lens

The Phase One 80mm f/2.8 is a sharp and well tested digital lens. The lens

is mounted by aligning the white dot on the lens with the white dot on the

camera body. Carefully mount the lens by turning it clockwise, until a click

is heard. If you feel resistance or if you hear a scratching-like sound stop and

retry – NEVER use force when mounting the lens as it should always slide into

place without resistance.

9.19 Function of the Phase One Lens Adaptor

To mount the Phase One Multi-Mount, match the white dot on the camera

up with the white dot on the Multi-Mount and turn slowly clockwise. NEVER

use force to mount the ring. When the Phase One Multi-Mount is mounted

you can t Carl Zeiss/Hasselblad V and Hasselblad 200series lenses on the

camera.

120

9.20 List of Alternative Lenses

Recommended Digital lenses

Producer Specs Limitations Adaptor/Mount notice

Mamiya 28 f.4,5 AFD Mamiya 645AFD Sekor

Mamiya 75-150 f.4,5 Mamiya 645AFD Sekor

Mamiya 35 f.3,5 Mamiya 645AFD

Mamiya 45 f.2,8 Mamiya 645AFD

Mamiya 55 f.2,8 Mamiya 645AFD

Mamiya 150 f.3,5 Mamiya 645AFD

Mamiya 210 f.4,0 Mamiya 645AFD ULD

Mamiya 300 f.4,5 Mamiya 645AFD APO

Mamiya 55-110 f.4,5 Mamiya 645AFD

Mamiya 105-210 f.4,5 Mamiya 645AFD ULD

Schneider Kreutnach 55 f.2,8 Mamiya 645AFD Leafshutter

Schneider Kreutnach 80 f.2,8 Mamiya 645AFD Leafshutter

Schneider Kreutnach 110 f.2,8 Mamiya 645AFD Leafshutter

Producer Specs Limitations Adaptor/Mount Notice

Recommended MF lenses

Mamiya A 500 f.4,5 1+2 Mamiya 645 MF

Mamiya A 300 f.2,8 1+2 Mamiya 645 MF+APO

Mamiya A 200 f.2,8 1+2 Mamiya 645 MF+APO

Mamiya 55 1+2 Mamiya 645 leafshutter

Mamiya 80 f.2,8 N/L 1+2 Mamiya 645 leafshutter

Mamiya 150 f.3,8 N/L 1+2 Mamiya 645 leafshutter

Mamiya 105-210 f.4,5 1+2 Mamiya 645

Mamiya 500 f.5,6 1+2 Mamiya 645

Mamiya 55-110 f.4,5 N 1+2 Mamiya 645

Mamiya 150 f.2,8 1+2 Mamiya 645

Mamiya 300 1+2 Mamiya 645

Mamiya 24 f.4,0 1+2 Mamiya 645

Mamiya 35 1+2 Mamiya 645

Mamiya 150 f.3,5 N 1+2 Mamiya 645

Mamiya 45 1+2 Mamiya 645

Mamiya 210 N 1+2 Mamiya 645

Mamiya 80 f.1,9 1+2 Mamiya 645

Mamiya 55 1+2 Mamiya 645

Mamiya 80 f. 2,8 N 1+2 Mamiya 645

Hartblei MC TS-PC 45 f. 3,5 mamiya/Pentacon six super-rotator tilt/shift

Hartblei MC Hartblei 2x converter pentacon six

Producer Specs Limitations Adaptor/Mount Notice

Arsat MC Arsat 30 f.3,5 sheye Pentacon six

Arsat MC Arsat 45 f.3,5 Wide Angle Pentacon six

Arsat MC PCS Arsat 45 f.3,5 Pentacon six shift

Arsat MC PCS Arsat 55 f.4,5 Pentacon six shift

Arsat MC PCS Arsat 65 f.3,5 Pentacon six shift

Arsat MC Arsat 80 f.2,8 Pentacon six

Arsat MC Arsat 600 f.8,0 Pentacon six Mirror

Lenses usable in combination with Phase One Multi-Mount

Carl Zeiss CFi 30 f.3,5 3 hasselblad V

Carl Zeiss CFE 40 f.4,0 3 hasselblad V

Carl Zeiss CFi 50 f.4,0 3 hasselblad V

Carl Zeiss CFi 60 f.3,5 3 hasselblad V

Carl Zeiss CFE 80 f.2,8 3 hasselblad V

Carl Zeiss CFi 100 f.3,5 3 hasselblad V

Carl Zeiss CFE 120 f. 4,0 3 hasselblad V

Carl Zeiss CFi 150 f.4,0 3 hasselblad V

Carl Zeiss CFE 180 f.4,0 3 hasselblad V

Carl Zeiss CFi 250 f.5,6 3 hasselblad V

Carl Zeiss CFE 350 f.5,6 3 hasselblad V SA

Special purpose lenses

Mamiya 120 f.4,0 MACRO Mamiya 645 MF

Mamiya 50 SHIFT 1 Mamiya 645 MF

Mamiya 645 Auto bellows unit 1 Mamiya 645

Mamiya 80 MACRO 1 Mamiya 645

Other lenses usable in combination with adapter

Hasselblad 30 sheye

Hasselblad 40

Hasselblad 50

Pentacon ektogon 50

Arsat 55mm Shift

Biometar 80mm

Biometer 120mm

Sonnar 180mm

Limitation codes:

1: Stopped down metering not possible

2: Discontinued

3: Leaf shutter disables, only aperture priority

121

10.0 Maintenance

The Phase One 645DF+ generally needs very little maintenance. But this is

a professional tool and should be treated with care and caution. Always do

test shots before a photographic session if the camera for any reason has not

been used for a long period of time.

A frequently used product should be inspected periodically at the nearest

ocial Phase One repair center. Do NOT try to repair any camera, lens or back

errors or malfunctions – Please consult your local dealer.

10.1 Changing the Focusing Screen

1. Remove the lens.

2. Pull the Focusing Screen Release lever A forward, as illustrated, with

tweezers to ease the Focusing Screen down.

3. Remove the Focusing Screen from the Focusing Screen Frame by grasping

the tab on the edge of the screen with tweezers as illustrated.

4. When installing the screen, pinch the tab of the screen with tweezers, and

place the screen on the screen frame.

5. Push the screen frame up using the tweezers until hearing a clicking sound.

The screen is now properly installed. Never press down on other parts as this

will aect the focus function.

NOTICE

Since the Focusing Screen’s surfaces are soft

and easily damaged, handle them carefully.

Never touch the surface with bare ngers.

Should dust settle on it, merely blow away

by using a blower.

If the Focusing Screen needs cleaning, send

it to the nearest authorized Phase One

service center.

Do not attempt to clean the surface of the

Focusing Screen, as it is very delicate.

Do not touch and damage the mirror in any

way.

122

10.2 Battery Socket

Never leave batteries in the socket if the camera or back is not planned to be

used for longer periods.

Keep contacts clean and dry at all times.

External Battery Socket

Use an external battery case PE401 when using the camera in cold

temperatures where the battery capacity may drop.

1. Turn the shutter release mode selector lever to the L position (power o).

2. Use a coin or similar object to turn and remove the external battery socket

cap.

3. Remove the battery case from the camera body

4. Connect the external battery case to the body. Connect the plug of the

external battery case in which the batteries are installed, to the external

battery socket.

5. Reinstall the original battery case, from which the batteries were removed,

in the body. Turn the battery case lock to lock it in the body.

10.3 Tripod/Electronic Shutter Release Contact

Keep all contacts clean and dry at all time.

When using a tripod with 3/8” screw (instead of 1/4” screw) remove the small

screw[A] from the tripod screw hole on the bottom of the body using a plus

screwdriver, then use a coin to remove the tripod screw adapter bushing[B].

You will nd Electronic Shutter Release both on the camera body and on the

back. When used, it is recommended to use the shutter release on the back.

Keep both contacts dry and clean.

Notice:

Make sure to re-install the empty battery

case into the body.

The empty battery cassette must be

inserted into the body.

The batteries may generate heat if the

external battery case is connected to the

body while the batteries are loaded on the

body.

M.UP

123

10.4 Camera Display Error-Notication

The camera caution mark will blink if the camera body detects an abnormality.

End

LCD display

Problems

Causes and remedies

Remedies

When Any of These Displays Appear...

124

10.5 Lens Maintenance

Never touch the inner optics of the lens with your ngers. Keep the inner

optics perfectly clean with air, a lens brush or the dry cloth delivered with

the lens.

Do not touch the contacts. Keep the contacts clean with either a dry cloth or

by using a breglass brush. Do not use any other tools on the lens.

The lens is not waterproof. It should be immediately dried with a cloth if

becomes wet. If it is exposed to salt, moisten a cloth, wring it and carefully

clean.

10.6 Back Maintenance

Cleaning the CCD

The Phase One IQ back must have the protection plate tted when it is not

attached to a camera. Dust may accumulate on the IR lter, which will degrade

the image quality if not removed. Please follow the directions included in the

CCD cleaning kit that came with the IQ back.

10.7 IR Filter on the CCD

The IR lter (Infrared reduction lter) is permanently mounted on top of the

CCD. The lter may not be removed for several reasons:

• The focusing of the IQ back camera back will be damaged

• It is only possible to remount the lter without dust getting in between the

lter and the CCD if you have access to special clean room facilities

• The Phase One Product Warranty is terminated

125

10.8 645DF+ Camera Body Specifications

l Open platform for maximum choice and compatibility

l Durable, proven platform for secure operation

l Ergonomic handling and ease of use

l Use Phase One digital lenses, Mamiya AF/AFD lenses or Hasselblad

V lenses

l Exposures from 1/4000s to 60 minutes

l Flash synchronization up to 1/1600 sec.

Shutter speed from 1/4000s to 60 minutes, extremely high flash synchronisation up to 1/1600 second to stop

action with fast shutter speed or flash.

The mirror and viewfinder of the Phase One 645DF+ camera are almost three times larger than those of 35mm

cameras, providing much greater control of focus and composition.

While hosting a complete list of features and custom functions, the Phase One 645DF+ camera is extremely easy

to use. All settings important to the exposure are easily controlled by manual dials and soft buttons.

Camera type Modular 645 AF SLR body

Lenses

Phase One Digital focal plane lenses,

Schneider Kreutznach leaf shutter lenses and

Mamiya 645 AFD lenses

Compatible with Hasselblad V lenses

Backs Open platform back mount

Auto focus

TTL phase-dierence AF with 3 focus points

Focus conrmation in manual mode

Infrared AF assists for unfailing focus

Auto focus lock for swift AF/ M shift

Shutter

1/4000s to 60 minutes

Up to 120 frames per minute

Shutter speed bracketing

Flash

Focal plane shutter: Up to 1/125s

Leaf shutter lenses: Up to 1/1600s’ 1st and 2nd

curtain ash synchronization

X sync terminal and support for TTL ash

Light

Metering

TTL metering (average, spot and auto)

Programmable AEL button

Exposure compensation: +/- 5EV

Mirror-Up Electronically-activated by switch on grip

Viewnder

Fixed prism viewnder

Exchangeable diopter from -5 to +3

LCD panel with full exposure information

Focusing Screen

Interchangeable focus screens

Laser engraved mask for digital back

Matte, Grid, Checker, Microprism

Selftimer Self-timer from 2 to 60 sec

Remote Screw-in cable release on shutter button

Terminal for electronic triggering devices

Stop Down

Preview Stop down button on front of camera

Tripod Socket 1/4 inch and 3/8 inch included

Power

Requirements

Rechargeable Li-ion battery or

6 AA batteries (standard or rechargeable)

External battery pack – 6 AA batteries

External AC adapter

User

conguration

3 Custom dial modes for capture settings

36 custom settings

Customizable dials and buttons

Size W, H, D // 6, 5, 7.2" // 153, 128, 184mm

Weight 35 oz. / 1030g. w/o batteries

Content is subject to change without notice

126

10.9 Phase One 645DF+ Housing Specication

Camera type : 6x4.5cm format, electronically controlled focal-plane shutter, TTL multiple mode AE, AF single

lens reex

Actual Image size: 56x41.5 mm

Lens mount : Mamiya 645 AF Mount, compatible with M645 Mount (manual focus conrmation, focus aid,

stopped-down exposure metering)

Viewnder : Fixed prism viewnder magnication x0.71; built-in diopter adjustment (-2.5 to +0.5, optional

diopter correction lenses provide adjustment ranges of -5 to -2 diopter and 0 to +3 diopter); built-in eye-piece

shutter

Focusing screen : Interchangeable, Matte (standard), Checker, and Microprism Type C for Non-AF M645 lenses.

Field of view : 94%* of actual image

Viewnder info : Focus mark, defocus mark, warning mark, aperture value, shutter speed, metering mode (A, S,

A/S), exposure compensation value (dierence between set value and metered value) and ash ready/ OK lamp with

TTL Metz connection.

AF method : TTL phase dierence detection method; sensor: CCD line sensor (I+I type); operating range: EV0

to EV18 (ISO 100)

Focus area : Displays the focus area in the viewnder screen

AF assist beam : Activates automatically under low light, low contrast.

Range: 9m (when using AF80mm f/2.8 D lens)

AF lock : By pressing the shutter release button halfway down in the AF-S mode, or by pressing the AFL

button.

Exposure modes : Aperture-priority AE, shutter-priority AE, programmed AE (PH, PL setting possible), and manual

AE meteringmode : TTL metering, center-weighted average (AV), spot (S), and variable ratio (A-S auto)

Increments of shutter : Both the shutter speed and the aperture level can be set to 1/3 or speed and aperture 1/2

using the electronic dial lock function

Metering range : EV 2 to EV 19 (with ISO100 and AF80mm f/2.8 D lens)

Exposure compensation : Expandable to ±5 EV

AE lock : With AEL button; canceled by pressing the button again. When AEL button is pressed, exposure

compensation and metering dierence is displayed in the viewnder. (+-6EV, 1/3 steps in M mode).

Shutter : Electronically controlled vertical metal focal-plane shutter. (vertical travel)

Shutter speed : AE 30 to 1/4000 sec. (1/8 step), manual 30 to 1/4000 sec. (1/2 or 1/3 steps), 1 min-60 sec. (1

step), X, bulb (Bulb, electronically controlled), tIME, shutter curtain protection mechanism

Auto bracket shot:Enable with auto bracket button (3 frame shots, 5 frame or 7 frame shot with auto bracketing).

Specify 1/3, 1/2, 2/3 or 1EV steps.

Flash synch : X contact point, 1/125 seconds. Synchro speed can be changed away from terminal.

Flash control : TTL direct ash control, supports Metz SCA3002 system (SCA3952 Adapter)

Mirror up shot : Select by pressing the mirror up button.

LCD displays : Program AE mode icon, synchro mode icon, shutter speed, aperture, custom function icon, user

function icon, focal plane mode icon, lens shutter mode icon, AE lock icon, auto focus lock icon, mirror up icon, focus

area icon, auto bracketing icon, self timer icon, repeat mode icon, delay mode icon, remaining battery power icon, spot

metering icon, dial lock icon, ash compensation icon, exposure compensation icon, exposure compensation, delay

time.

Sync terminal : X contact (sync speed 1/125 sec.)

Cable release socket : On shutter button

Remote-control terminal : On side of body; electromagnetic cable release RE401 and RS402

Self timer : Self timer intervals can be set from 0.5 to 90 sec.: 0.5-10 sec. by the second, 10 to 90 sec. in 10 sec.

units, 2 to 10 mins by the minute and 10 to 6 mins in units of 10 minutes.

Depth-of-eld conrmation : Preview Button on body

Custom settings : 19 items

Tripod socket : U 1/4 inch and U 3/8 included

Power requirements : Rechargeable Li-ion battery or 6 AA batteries (alkaline or rechargeable)

External power socket : An external battery case can be connected.

Size & weight : 6 ”(W)X5 ”(H)X6 ”(D) / 153(W)X128(H)X152(D)mm

2.3 pounds / 1,030 g (body only)

* This information is based on a linear (horizontal/vertical) measurement.

127

11.0 Software

Capture One Pro is a professional RAW converter and image editing software.

It contains all the essential tools and high-end performance in one package

to enable you to capture, organize, edit, share and print images in a fast,

exible and ecient workow.

Please go to http://help.phaseone.com/en for further information regarding

Capture One. (This online Users Guide can also be found under the Help

menu on Windows and Mac). A PDF of the Capture One User Guide can also

be found on the USB memory stick that came with you IQ back.

11.1 To Import Images...

1. Go to File and select “Import Images…” The dialog box will open to

browse les.

2. Navigate to the applicable folder, card or disk in the Locations tool.

3. Select Capture folder (import location) and type in the job name and

Metadata (copyright, caption) if desired.

4. If you want to select a naming format for the imported les, press “For-

mat” in the Naming tool.

5. You can select all or specic images to import.

6. Press “Import All”. You can continue working while images are imported

in the background.

Inserting a memory card into a card reader will automatically bring up the

Import Images dialog window.

Shooting Tethered

Capture One Pro is also used to shoot tethered from an IQ back. Find out

more on page 53 or for more information please consult the online User

Guide available in the Capture One Help menu or go direct to

http://help.phaseone.com/CO7/Capture/Tethered-Shooting.aspx

128

12.0 End User Support Policy

Phase One guarantee World Class Support and Service with every purchased

product. Please check www.phaseone.com for the latest updated support

policy.

Worldwide Dealer Network

At Phase One we think globally but act locally. Phase One’s products are sold

through a worldwide network of dedicated and competent local partners to

make after-sales support convenient for you.

Phase One’s local partners oer rst line support to their customers. Many

provide additional services such as training, extended warranty agreements,

upgrade programs, and many other services that will add value to your

Phase One investment. Contact your local Phase One partner to discuss your

options. Digital camera back pricing and repairs are also handled locally.

If there is no local partner in your area, then please contact Phase One

directly, and we will assist you directly or through one of our partners.

Find your local Phase One partner or take advantage of Phase One’s wide

range of on-line support tools at http://support.phaseone.com

129

12.1 Web Resources

Phase One oer users a host of online resources including inspire, enthuse

and inform. Find detailed information including User Guides and manuals

about Capture One or our Digital Backs from www.phaseone.com

Knowledge Base

Phase One’s searchable Knowledge Base at http://support.phaseone.com

provides detailed answers to many users questions. This ‘self-service’ site is

free of charge and available to all Phase One owners.

Capture One On-line Support Forums

Go to Phase One’s ocial support forum to share your experiences and

get assistance from other Phase One owners as well as from Phase One’s

Technical Support team at http://support.phaseone.com

Some Phase One partners oer on-line support forums, hosted from their

own web pages. Please note that these forums are governed by separate

rules. Phase One oers no guarantees and assumes no responsibility or

liability with respect to the support provided by our local partners.

Many resources and tutorials are created on voluntary basis, and Phase

One is always interested in seeing your videos, reviews, blogs or websites

concerning Phase One.

PhaseOneDK Ocial YouTube Channel

Check out our Youtube channel that provides access to tutorials, showcases,

technical videos and more at http://www.youtube.com/PhaseOneDK

Twitter, Facebook and Google+

There are plenty of ways to get in touch with Phase One across all the main

social media platforms. Finds us on facebook follows us on Twitter and

connect with us on Google+ for the latest product news, promotions and

much more.

130

131

User Guide: Appendix

13.0 Open Platform – Freedom of Choice

Phase One’s Open Platform policy delivers maximum choice and compatibility

with a wide range of dierent camera platforms.

This section covers the IQ back’s compatibility with the Hasselblad V and

H series, Mamiya RZ67, Phase One 645, Mamiya 645, Contax 645 and View

Camera solutions.

Double Exposure Protection

It is not possible to accidentally double expose an image by capturing one

shot quickly after another when an IQ back is used on cameras such as the

Phase One 645DF+/DF/AF, Mamiya 645DF/AFDIII or Hasselblad 555 ELD

(DIG mode). The electronic communication with the body ensures that the

IQ back is ready before allowing release of the next shot. However, users of

other camera bodies that do not use the electronic interface from the IQ will

have to wait for the ready beep signal before releasing the next shot.

Viewnder Masks

Cameras including the Mamiya RZ67 and Hasselblad V-series need a

viewnder mask as the image area of these models is dierent to the image

sensor size of the three IQ models. Go to page 92 to nd out more about

the IQ sensors and go to page 155 for the full list of focusing Screens and

viewnder masks.

132

13.1 IQ Back and Phase One 645AF/DF/DF+ and Mamiya 645 AFD

The IQ back is fully integrated with the Phase One and Mamiya 645 camera

series and functions as a part of the whole camera system. The IQ back

communicates with the cameras through a fast internal electrical computer

interface.

Find out more about the Phase One DF+ camera and IQ back from page 12.

13.2 Mounting IQ back on the Phase One 645 AF &

Mamiya 645 AFD Series

Ensure that the camera mirror is up and the shutter is open when no digital

back is attached. When attaching the IQ back to the camera body the shutter

will close and the mirror will come down.

1. Place the bottom of the IQ back in the locking mechanism.

2. Press the button (circled above left) with your thumb and lever the back

into place.

3. Release the button to lock into position.

Failure to perform this procedure properly can cause an error with the camera

body where the shutter will continuously open and close. If this occurs, remove

the IQ back and follow steps 1 to 3 again.

133

13.3 More Details: Phase One and Mamiya 645 Series Cameras

Power Management and Shutter Latency

The IQ CCD is put to sleep to reduce power consumption when it is not in

use. The IQ needs to wake up before shooting and the timing of this wake up

signal is referred to as the Latency.

The Phase One and Mamiya 645 camera body response time is independent

of the shutter latency setting so it is therefore recommended to keep the

latency on the Normal (default) setting, as this will ensure a longer battery

life.

Studio Flash Sync on the Camera Body

A ash sync lead should be connected to the camera body when using the

IQ back on Phase One 645AF or 645DF/DF+, Mamiya AFD or AFDII models.

Always use a ash cable and/or equipment that provides grounding for the

ash.

Image Orientation

The CCD in the IQ back is positioned in a landscape orientation. However, the

IQ back has an internal sensor that detects when it has been rotated. Thus,

when the camera is rotated and an image is captured in portrait position

the image will appear correctly oriented on the LCD and in the Capture One

application.

Image (left) features the V-Grip Air. Phase One Part # 71507

134

Mirror Up

When using mirror up with the Drive Dial in the M.UP position ensure that

the Exposure Mode Dial and the focus mode are both in Manual mode (M).

It is not possible for the camera to measure light or focus when the mirror is

up. Please consult the Mamiya 645 Instruction manual to learn how to use

Mirror Up.

Viewnder Masking

The image area of the Phase One and Mamiya 645 cameras is approximately

56x42 mm. Viewnder masking is not necessary for IQ280 and IQ260 models

as their light sensitive CCD measures 53.9x40.4 mm.

Shutter Release Button

Drive Dial

Mirror*

*Do not touch the mirror

Exposure Mode Dial

135

14.0 IQ Back for Mamiya RZ67

The IQ backs are compatible with the Mamiya RZ PRO II and PRO IID with the

use of an adaptor plate.

The 645DF+ version of an IQ back can be used on a Mamiya RZ PRO IID with

a Mamiya RZ PRO IID adaptor plate. (Phase One Part # 70994)

The Hasselblad V version of an IQ back can be used on the older version

Mamiya RZ PRO II with a Mamiya RZ Pro II adaptor. (Phase One Part# 70964)

N.B. It is possible to use a Hasselblad V version of an IQ back on the new

Mamiya RZ67 PRO IID by getting the back mount plate modied with the

following Mamiya service part number: Y22995-RZ.

14.1 Mounting IQ Back on the Mamiya RZ67

1. Place the bottom of the IQ back in the locking mechanism.

2. Press the button at the top of the back with your thumb and lever the back

into place.

3. Release the button to lock into position.

N.B. It is important to ensure that the bottom part of the IQ back is attached

correctly before the upper locking mechanism is pressed together.

Mounting the IQ Back Vertically

The CCD in the IQ back is positioned in a landscape orientation. However, it

is possible to mount the IQ back in an upright orientation to capture images

in a portrait format without having to rotate the camera. The IQ back has an

internal sensor that detects when it has been rotated so images will appear

correctly oriented on the LCD and in the Capture One application.

Mount the IQ back in the portrait position by lining up the adapter mount to the

corresponding indentations on the left side of the back. Press the button (circled

left) and lever the back into place. Release the button to lock into position.

136

14.2 Viewnder Masking

The image area of Mamiya RZ67 at 56x69.5 mm is larger than the size of the

three IQ model’s sensors so it is necessary to insert a viewnder mask.

There are two dierent masks available for the Mamiya RZ67 according to

which IQ is being used. (The size IQ280 and IQ260 models CCD is 53.9x40.4

mm while the IQ140’s CCD measures 43.9x32.9mm). Please check page 155

for the relevant viewnder mask.

Insert a Viewnder Mask

1. Remove the protection tape from the mask.

2. Dismount the prism/waist-level nder and remove the focus screen.

3. Place the viewnder mask in the bracket that holds the focusing screen.

4. Re-mount the viewnder focus screen.

5. Re-attach the prism/waist-level nder.

N.B. Please check the relevant Mamiya RZ67 manual regarding how to

dismount the viewnder and remove the focus screen.

3. 4.

137

14.3 More Details: Mamiya RZ67

Mode Selector

The mode selector on the trigger button should be turned to the white dot

when used with the IQ back. The selector should be set to the orange dot to

avoid draining the small battery when the IQ back is attached to the body

and not in use.

Warning: Even if the IQ back is turned o, the battery will drain slowly if the

orange dot is not selected

Shutter Latency Setting Mamiya RZ PRO II

An IQ back should be set to Normal Latency when it is used with a Mamiya

RZ PRO II.

Shutter Latency Setting Mamiya RZ PRO IID

Select the special Mamiya RZPRO IID camera mode, which available in the

Camera mode menu to ensure that the correct latency setting is used.

Studio Flash Sync on the RZ lens

A ash sync lead should be connected to the port on a lens when an IQ back

is used on a Mamiya RZ67 PRO IID. On the older PRO II, use the ash sync

connector on the Adapter plate. (The ash sync port on the IQ back is for use

with Large format cameras where no digital interface is available).

Mirror Up

Mirror up operation is only recommended if using Mamiya’s own double

cable release.

Double Exposure

Is is only possible to get a double exposure when a Hasselblad V mount

plate is being used. Avoid a double exposure by waiting for a ready-beep

from the IQ back before capturing another image.

138

15.0 IQ Back for Hasselblad V Series

The Phase One IQ back can be mounted on a wide range of Hasselblad

cameras including Hasselblad 555 ELD, 553 ELX, 501 CM and 503 CW.

15.1 Mounting the IQ Back on a Hasselblad V Series Camera

1. Place the bottom of the IQ back in the locking mechanism.

2. Press the button at the top of the back with your thumb and lever the back

into place.

3. Release the button to lock into position.

N.B. It is important to ensure that the bottom part of the IQ back is attached

correctly before the upper locking mechanism is pressed together.

Mounting the IQ Back Vertically

The CCD in the IQ back is positioned in a landscape orientation. However, it

is possible to mount the IQ back in an upright orientation to capture images

in a portrait format without having to rotate the camera. The IQ back has an

internal sensor that detects when it has been rotated so images will appear

correctly oriented on the LCD and in the Capture One application.

Mount the IQ back in the portrait position by lining up the adapter mount

to the corresponding indentations on the left side of the back. Press the lock

button (circled left) and lever the back into place. Release the button to lock

into position.

Warning! DO NOT MOUNT WHILE IN S OR RS MODE

N.B. The Phase One IQ back should not be mounted while the camera is set

to mirror up (S or RS modes). The camera should be set to AS, A or 0 mode.

Also ensure that the lens is not jammed when connecting the ash sync

cable to the Phase One IQ back.

139

15.2 Mounting a Viewnder Mask on a Hasselblad V Series Camera

The image area of a Hasselblad V camera body at approx. 6x6cm is a dierent

size to the three IQ model’s sensors so it is necessary to insert a viewnder

mask.

There are two dierent masks available for Hasselblad V series cameras

according to which IQ is being used. The size IQ280 and IQ260 models CCD

is 53.9x40.4 mm while the IQ140’s CCD measures 43.9x32.9mm. Please check

page 155 for the relevant viewnder mask.

Insert a Viewnder Mask

1. Remove the protection tape from the mask.

2. Dismount the waist-level nder and remove the focus screen.

3. Place the viewnder mask in the bracket that holds the focusing screen.

4. Re-mount the viewnder focus screen.

5. Slide the waist-level nder back into place.

N.B. Please check the relevant Hasselblad camera manual instructions before

removing the focus screen.

3. 4.

140

15.3 More Details: Hasselblad V Series

Sync Cable

A sync cable is always connected from the lens to the small connector in the

front plate on either the left or right side of the IQ back regardless of which

Hasselblad V type camera used.

Flash Lead Connection

A ash cable is always connected to the F-connector on the IQ back with all

Hasselblad V series cameras.

Mirror Up and Shutter Latency Setting

Set the Latency to Zero when shooting with a Hasselblad V, 903 CW and 905

CW.

Tethered Capture

Plug a FireWire 800 cable into the IQ back for tethered capture to a computer

using Capture One Pro.

141

15.4 Hasselblad 555 ELD

Ensure that the shutter release on the front of the Hasselblad 555 ELD is in

the DIG position when using a Phase One IQ back.

If for any reason you have to use the 555ELD in Film position (E.g. If the DIG

is not working) then set the IQ to Zero Latency.

Shutter Latency Setting

The IQ back can be used with both Normal and Zero latency with the

Hasselblad 555 ELD.

An IQ back has a default Normal latency setting that helps to save battery

life. But users may experience unwanted double exposures when using a

two-shot release cable.

Motor Cable on Hasselblad 555 ELD

A motor cable is not required when using an IQ back on a Hasselblad 555

ELD body.

142

15.5 Hasselblad 553 ELX

When using the IQ back on some Hasselblad motorized bodies (i.e. Hasselblad

ELX or Hasselblad ELM series), a motor cable is supplied to enable users to

re the camera shutter from a computer using the Capture One Pro Capture

button. (See circled button left).

Cable Connections

The cable is connected between the multi-connector on the IQ back and the

DIN connector on the Hasselblad. Ensure that A or AS mode are not used.

WARNING! Please note that the Phase One IQ back should not be mounted

while the camera is set to mirror up (S or RS modes). Make sure that the lens

is not jammed or locked open on the “B” setting when connecting the ash

sync cable to the Phase One IQ back.

Shutter Latency Setting

Set the latency setting to Normal on the IQ back while using a Hasselblad

553 ELX.

143

15.6 Hasselblad 501 CM and 503 CW without Winder

The Phase One IQ back can also be used with mechanical Hasselblad cameras

such as the 501 CM and 503 CW. These cameras are operated in single shot

mode via the shutter release button or a standard cable release.

WARNING! Please note that the Phase One IQ back should not be mounted

while the camera is set to mirror up. Also ensure that the lens is not jammed

or locked open on the “B” setting when connecting the ash sync cable to

the Phase One IQ back.

Shutter Latency Setting

Set the latency setting to Normal on the IQ back while using a mechanical

Hasselblad. Set the latency setting to Zero whilst using the Mirror Up func-

tion or if you need to rapidly press the shutter button. Precautions must be

taken not to trigger the shutter too fast when using Normal latency. If any

problems arise, it is recommended that users look at the green LED on the

back while slowly pressing the mechanical trigger on the camera body. Us-

ers can safely press the button all the way in the moment the LED ashes.

15.7 Hasselblad 503 CW with Winder CW

WARNING! Please note that the Phase One IQ back should not be mounted

while the camera is set to mirror up. Make sure that the lens is not jammed

or locked open on the “B” setting when connecting the ash sync cable to

the Phase One IQ back.

Set the Shutter Latency to Zero when using a 503 CW winder with an IQ back.

144

15.8 Cables shipped with IQ back for Hasselblad V

Classic and Value Added backs come with all the cables needed for the spe-

cic camera platform. A Value Added back also comes with an additional

50300143 cable for use with large format and technical cameras.

Part# 50300145 Motor cable for Hasselblad ELX. (Used for host capture when

the IQ back is used on a Hasselblad ELX body).

Part# 50300148 Sync cable short (For use with all Hasselblad medium format

bodies)

Part# 50300143 Multi connector to Lens sync (for use with Large format - in

two shot mode)

Part# 50300144 This cable is available as a separate purchase only.

From multi connector to mini jack female (for use to adapt older Large format

walk-up cables or older Kapture Group one shot adaptor cables to connect

to the multiport).

145

16.0 IQ Back for Hasselblad H Series

The Phase One IQ (H-mount) digital back is designed specically for

Hasselblad H1 and H2 cameras.

16.1 Mounting the IQ back on the Hasselblad H1/H2

1. Ensure that the mirror is up and the shutter is open. (This is the default

position when no cassette is attached to camera body).

2. Place the bottom of the IQ back in the locking mechanism.

3. Lever the back into place.

4. Do not let go of the back until you hear a clicking noise that signals the

back is locked into position. The mirror will come down and shutter will close

when IQ back is attached to the camera.

N.B. It is important to ensure that the bottom part of the IQ back is attached

correctly before the upper locking mechanism is pressed together.

Removing the IQ back from the Hasselblad H1/H2

1. Rotate and press the silver button (illustrated left) to unlock the back.

(Ensure that the back is supported in your hand before pressing this button).

2. Gently lever away the top of the back rst. Be careful with the contacts

and protective glass on the back.

N.B. Your IQ back should always be protected by its plate when it is not

attached to the camera.

146

16.2 Viewnder Masking

The image area of the Hasselblad H1/H2 cameras is 56x41.5 mm. A viewnder

mask is only needed for the smaller size of the IQ140 CCD that measures

44x33mm. Viewnder masking is not necessary for IQ280 and IQ260 models

as their light sensitive CCD measures 53.9x40.4 mm.

Please check page 155 for the relevant viewnder mask.

Insert a Viewnder Mask

1. Remove the protection tape from the mask.

2. Dismount the prism/waist-level nder and remove the focus screen.

3. Place the viewnder mask in the bracket that holds the focusing screen.

4. Re-mount the viewnder focus screen.

5. Re-attach the prism/waist-level nder.

N.B. Please check the relevant Hasselblad H-series manual regarding how to

dismount the viewnder and remove the focus screen.

3. 4.

147

16.3 More Details: Hasselblad H Series

Camera Display

The Hasselblad H1/H2 incorporates a screen that displays information about

the camera set-up. It shows the aperture value, AF mode, shutter speed etc.

The Hasselblad H1/H2 will also display some IQ back information on this

screen. For example, error messages including ”Digital back storage media

is full” will be displayed on the screen if the CompactFlash in the IQ back is

full to capacity.

ISO Settings

The ISO value is also displayed on the H1/H2 camera screen. The ISO setting

can be adjusted from the camera back or in Capture One software when

shooting tethered.

Please consult page 61 of this manual for details on setting the ISO. Go to

page 53 for more information about tethered shooting.

Auto Exposure

All the Hasselblad H1/H2 auto exposure modes are fully supported by the

IQ back.

Please check the relevant Hasselblad H-series manual for more information

on exposure modes.

148

Viewnder Information

The viewnder information bar is located below the image area within

the viewnder display. It displays the camera’s exposure mode and values

etc. It also includes a counter with the number of captures remaining on

the storage media. (See top bar circled left). ‘99’ is the maximum number

displayed. ‘99’ will continue to be displayed if there are more than that

remaining on a CompactFlash card. An ‘E’ indicates that the storage media

is full. Users will have to delete some captures or replace the CompactFlash

card before continuing. (See bottom bar circled left).

Double Exposure Protection

It is not possible to accidently double expose an image by capturing one

image quickly after another when an IQ back is used on a Hasselblad H1/H2.

N.B. At the end of an exposure, image information has to be moved from the

CCD to the processing system. During this short period of time the CCD must

be protected from light exposure. The IQ back ensures that the CCD is safely

cleared of information by disabling the Hasselblad camera’s shutter release

during this procedure.

Image Orientation

The CCD in the IQ back is positioned in a landscape orientation. However, the

IQ back has an internal sensor that detects when it has been rotated. Thus,

when the camera is rotated and an image is captured in portrait position

the image will appear correctly oriented on the LCD and in the Capture One

application.

149

Flash Lead Connection

A ash cable is always connected to the Hasselblad H1/H2 camera body.

The ash sync cable must not be connected to the camera back when used on

a Hasselblad H1/H2. The ash sync connector on the IQ back is only intended

for use with a Phase One FlexAdaptor or other large format adaptors.

16.4 Cables Shipped with IQ back for Hasselblad H

No cables are required to use the IQ back with a Hasselblad H1/H2.

A Value Added IQ back comes with an additional multi-connector to Lens

sync cable (part# 50300143) for use with large format cameras in two shot

mode.

Part# 50300144 This cable is available as a separate purchase only.

From multi-connector to mini jack female (for use to adapt older Large

format wake-up cables or older Kapture Group one shot adaptor cables to

connect to the multiport).

150

17.0 IQ Back for Contax 645

The Phase One IQ (Contax mount) digital back is designed specically for the

Contax 645 camera. The IQ back communicates with the Contax 645 through

a fast internal electrical computer interface and utilizes TTL phase dierence

detection type auto focus system.

17.1 Mounting IQ Back on a Contax 645

1. Place the bottom of the IQ back in the locking mechanism.

2. Press the button at the top of the back with your thumb and lever the back

into place.

3. Release the button to secure it into position.

4. Lock the IQ back into place by sliding the switch left towards the release

button. (See switch circled below left).

N.B. It is important to ensure that the bottom part of the IQ back is attached

correctly before the upper locking mechanism is pressed together.

Removing the IQ back from the Contax 645

1. Slide the locking switch to the right position.

2. Press the button (circled left) to unlock the back. (Ensure that the back is

supported in your hand before pressing this button).

3. Gently lever away the top of the back rst. Be careful with the contacts

and protective glass on the back.

N.B. Your IQ back should always be protected by its plate when it is not

attached to the camera.

151

17.2 Viewnder Masking

The image area of the Contax 645 camera is 56x41.5 mm. A viewnder mask

is only needed for the smaller size of the IQ140 CCD that measures 44x33mm.

Viewnder masking is not necessary for IQ280 and IQ260 models as their

light sensitive CCD measures 53.9x40.4 mm.

Please check page 155 for the relevant viewnder mask.

Insert a Viewnder Mask

1. Remove the protection tape from the mask.

2. Dismount the prism/waist-level nder and remove the focus screen.

3. Place the viewnder mask in the bracket that holds the focusing screen.

4. Re-mount the viewnder focus screen.

5. Re-attach the prism/waist-level nder.

N.B. Please check the relevant Contax 645 manual regarding how to dismount

the viewnder and remove the focus screen.

3. 4.

152

17.3 More Details: Contax 645

Exposure Modes

The Contax 645 manual (M) and semi-auto exposure modes (Av, Tv) are fully

supported by the IQ back. Please note that Bulb is only supported on Contax/

IQ back when used in conjunction with the Live View function. Go to Chapter

20 (from page 156) for more information about Live View.

Please check the relevant Contax 645 manual for more information on

exposure modes.

Ensure that exposure times are limited between 1/4000 second and approx.

1 second to obtain the highest possible quality with an IQ back and Contax

645. Please note that it is not possible to expose images longer than 60

seconds with an IQ back.

ISO Settings

The Contax 645 exposure modes use the ISO value set in the IQ back. The ISO

setting can be adjusted from the camera back or in Capture One software

when shooting tethered.

Please consult page 61 of this manual for details on setting the ISO. Go to

page 53 for more information about tethered shooting.

Double Exposure Protection

It is not possible to accidently double expose an image by capturing one

image quickly after another when an IQ back is used on a Contax 645 e.g.

when using the continuous drive mode.

153

TTL ash

Using TTL ash with the Contax 645 camera and IQ back will result in a 2

f-stop overexposure. When using TTL ash, the exposure compensation on

the ash unit must therefore be set to –2 f-stops.

This overexposure happens because the CCD element reects light dierently

than lm and this cannot be communicated to the Contax.

Image Orientation

The CCD in the IQ back is positioned in a landscape orientation. However, the

IQ back has an internal sensor that detects when it has been rotated. Thus,

when the camera is rotated and an image is captured in portrait position

the image will appear correctly oriented on the LCD and in the Capture One

application.

17.4 Flash Lead Connection

A ash cable is always connected to the Contax 645 camera body.

The ash sync cable must not be connected to the camera back when used

on a Contax 645. The ash sync connector on the IQ back is only intended for

use with a Phase One FlexAdaptor or other large format adaptors.

154

17.5 Cables Shipped with IQ back for the Contax 645

(Value added only)

Part# 50300143 Multi-connector to Lens sync (for use with Large format - in

two shot mode)

Part# 50300144 This cable is available as a separate purchase only.

From multi-connector to mini jack female (for use to adapt older Large

format wake-up cables or older Kapture Group one shot adaptor cables to

connect to the multiport).

Part# 50300154 From multi-connector to mini jack on the Contax handgrip

(used to enable Host Capture from Computer)

N.B. Operating the camera from the host computer

The supplied release cable must be connected between the multiple-pin

connector on the IQ back and the mini-jack connector placed at the bottom

of the handgrip on the Contax camera house.

155

18.0 IQ Back for View Cameras

The Phase One IQ back is compatible with most technical view cameras and

large format cameras via camera interface adaptors. The IQ back supports

most mechanical shutters and some electronic shutters from Horseman,

Schneider and other manufacturers.

Phase One Sleeping Architecture

The Phase One Sleeping Architecture has been developed to help produce

noise free exposures without the use of active cooling of the CCD. The

sleeping architecture ensures minimum heat build up inside the back by

putting all the unused circuits to sleep, and only powering the circuits that

are actually needed at any given time.

156

18.1 Using the 2-shot Release

The IQ back can be used with mechanical shutters that can be red twice

within four seconds. The rst release of the shutter activates the digital

back; the second release is for the exposure. If the time limit of four seconds

is exceeded, the camera gives a warning ‘beep’ followed by a ‘two shoot

error’ warning that will be displayed on the LCD screen.

There are several automatic or semi-automatic two shoot solutions available

from third parties manufacturers to use with a mechanical shutter. Please ask

your dealer for more information.

18.2 Using the 1-shot Release

The 1-shot release cable is created to simplify your studio workow.

1. Connect the ash exit (circled left) on the shutter and plug the opposite

end to the multi-pin port on the IQ back. (Via Part# 50300144 From multi-

connector to mini jack female)

2. Connect a ash sync lead to the port on the IQ back.

3. Close the shutter if necessary.

4. Push the button on the 1-shot release lead to ‘wake up’ the camera back .

(circled left) and take the shot within a few seconds.

N.B. It is not possible to control the exposure or trigger the shutter from

Capture One when using a fully manual camera. Only limited EXIF data

is recorded when shooting with manual cameras. The IQ back will add a

calculated approximate shutter speed but the aperture value will not be

recorded.

157

18.3 Phase One FlexAdaptor

The Phase One FlexAdaptor is available for use with most large format

cameras.

The Phase One FlexAdaptor can automatically stitch two or three images

together using the Stitch function in Photoshop.

Please see the reference manual that comes with the FlexAdaptor for more

details.

18.4 Shutter Latency Settings for the FlexAdaptor and Other

Technical Camera Adaptors

The Phase One FlexAdaptor and other technical camera adaptors for the IQ

back can be used with both normal and zero shutter latency.

Select the Normal latency setting if the IQ back is used on a camera with a

2-shot release. (See 18.1)

Please note: The Zero shutter latency setting will increase the power

consumption of the IQ back, as it will be constantly prepared for exposure.

158

19.0 List of Focusing Screens and Viewnder Masks

19.1 Full Frame Focusing Screens or with Engraved Masking

Part #

70756 Focusing Screen for Phase One 645 Camera

(Standard Full Frame IQ280/IQ260)

70754 Focusing Screen IQ140 for Phase One 645 Camera

70757 Focusing Screen for Phase One 645 Camera SD402

(Checker Grid)

70758 Focusing Screen for Phase One 645 Camera SA402

(Microprism for non AF lenses)

19.2 Viewnder Masks

Part #

40101906 Viewnder Mask for Phase One IQ140 for Hasselblad H1/H2

40101903 Viewnder Mask for Phase One IQ140 for Phase One/

Mamiya 645 AFD

40101905 Viewnder Mask for Phase One IQ140 for Contax 645

40101901 Viewnder Mask for Phase One IQ140 for Hasselblad V

40101929 Viewnder Mask for Phase One IQ140 for Mamiya RZ

40102056 Viewnder Mask for Phase One IQ260/IQ280 for Mamiya RZ

0102044 Viewnder Mask for Phase One IQ260/IQ280 for Hasselblad V

159

20.0 Live View

The Live View function is intended for use when a camera is mounted on a

tripod and the subject is stationary.

Live View is ideal for use with technical view cameras in a studio environ-

ment or for architectural photography, where photographers would ordi-

narily have to rely on an external viewnder or a separate focusing glass /

sliding adaptor.

The Live View function enables photographers to compose an image

directly on the high resolution display of the IQ digital back. Focus can be

checked by zooming into a subject on the screen by up to 400%.

160

20.1 Starting Live View

1. Live View is accessed from the Context Menu (circled left) in the lower

right corner.

The Context menu is always visible on the Home screen. Tap the lower right

corner of the screen to reveal the icon if it is hidden in some of the Play

mode displays.

2. Select the Live View (movie camera) icon from the context menu. (Circled

left).

3. When Live View is activated ensure that a Live View white balance is

applied. Tap the lower right corner of the screen to bring up the context

menu and select the White Balance Picker (Circled left).

Go to page 158 for more information about Live View white balance.

161

20.2 White Balance

1. After selecting the White Balance Picker, tap the screen to select a neutral

area to calibrate the Live View.

2. If a precise white point is dicult to achieve in full screen view, slide a

nger on the left side of the screen to zoom into to a part of the image that

you want to use as white reference.

Exit the White Balance mode by deselecting the picker in the context menu.

Alternatively, press and hold the upper left physical button on the IQ back

to return to the Home screen.

Go to page 159 to nd out more about the zoom function.

20.3 Quality and Brightness

1. Go to the context menu and select the Live View exposure controls icon

(circled left).

2. Two sliders will appear at the bottom of the screen to help users adjust

the live view to suit the ambient lighting conditions being used. The top

slider is a speed vs. quality slider. Increase the quality by moving slide to the

right or achieve a faster frame rate on the left. The lower slider controls the

brightness of the Live View.

162

20.4 Zoom

Zoom into the live view by sliding a nger up in the left side of the screen.

Double tap on the image to bring up a 100% view. If a zoom is already ap-

plied, double tap the screen to return to a full image view.

20.5 Grid

1. Go to the context menu and select the Grid icon (circled left) to apply

a default grid. Press and hold the Grid icon to select one of a selection of

other grid options to apply to the live view.

20.6 Auto Stop and Start

Live View will be paused if the screen is not touched for one minute.

Touch the screen again to restart Live View.

163

20.7 Accessories

Live View is easily overexposed in due to the high sensitivity of the IQ CCD

sensor and its large size. It is sometimes necessary to take steps to prevent

overexposure by either stopping down the aperture or by using a Neutral

Density lters (ND lters ). ND lters are widely available, and it is even pos-

sible to get variable ND lters, that can prove invaluable when working in

changeable outdoor ambient light.

Recommended Suppliers

Schneider Optics:

http://www.schneideroptics.com/lters/index.htm

Lee Filters:

http://www.leelters.com/camera/products/nder/ref:C475674681BB1B/

Sing Ray Vari ND:

http://www.singh-ray.com/varind.html

164

20.8 Live View Camera Support

The Phase One IQ back Live View function is supported on both medium

and large format view cameras. Find out how to operate Live View from the

following list of cameras:

View Cameras

1. Open the lens and select the desired aperture value.

2. Activate Live View on the IQ back.

Phase One 645AF/645DF/645DF+

1. Activate Live View on the IQ back.

2. Adjust the exposure time dial until the camera display states ‘time’.

3. Press the camera shutter button.

Hasselblad H1/ H2

1. Activate Live View on the IQ back.

2. Select the M (Manual) mode.

3. Select the desired aperture value.

4. Set the shutter to ‘T mode’ .

N.B. It is only possible to change the aperture when the camera body is

idle/not exposing. Please exit the T-mode to change aperture.

165

Hasselblad V

1. Activate Live View on the IQ back.

2. Select B (Bulb) mode.

Mamiya RZ67 Pro II/Pro IID

1. Activate Live View on the IQ back.

2. Select B (Bulb) mode.

N.B. It is only possible to change the aperture when the camera body is

idle/not exposing. Please exit the Bulb mode to change aperture.

Contax 645

1. Activate Live View on the IQ back.

2. Select B (Bulb) mode.

3. Select the desired aperture value.

N.B. It is only possible to change the aperture when the camera body is

idle/not exposing. Please exit the Bulb mode to change aperture.

SparkLAN Communications WUBR507N 802.11abgn Wireless USB Module User Manual Phase One 645 DF and IQ Digital Back Users Guide

SparkLAN Communications, Inc. 802.11abgn Wireless USB Module Phase One 645 DF and IQ Digital Back Users Guide

Contents

WUBR-507N_UserMan_2

Navigation menu

Namespaces

Views

Navigation