Spectralink PP6N40-1G9 KIRK 5040 Handset with Blue tooth User Manual UserMan BT

Spectralink Corporation KIRK 5040 Handset with Blue tooth UserMan BT

Contents

UserMan BT

Page 1 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. WML- 46### User Manual The purpose of this m anual is to explain correct way how to int egrat e m odule WML- 46# # # t o t he end product . I t includes procedures that shall assist you to avoid unforeseen problem s. This manual present s inform at ion that shows how m odule and OEM product , where m odule integrat ed, complies with regulat ions in cert ain regions. Any m odifications, not expressly approved by the m anufacturer could void the aut hority t o operat e in these regions. Cont ent 1.General 2. Regulatory and Safety Com pliance. European Union. 2.1 Declarat ion about perform ed tests. 2.2. Labelling 3. FCC Regulatory Inform at ion 3.1 Labelling. 3.2 Antenna im plem entation not es. 4. Other regulat ory notes for OEM. 5. A separat e approval. 1 . Genera l This Bluet ooth radio m odule has t o be inst alled and used in accordance with t he t echnical descript ion/ inst allat ion inst ructions provided by the m anufacturer. This Bluet oot h radio m odule is intended to be placed on t he m arket in all St at es, where the Bluetoot h™ t echnology and the used frequency band is released. For det ail inform at ion concerning type approv al of t his m odule ( e.g. where this m odule is already pre- approved) please contact t he aut horised local distributor or the m anufact urer. The system m ay only be im plem ent ed in t he configuration that was aut horized. Not e that any changes or m odificat ions to this equipm ent not expressly approved by the manufacturer could void the user’s authorit y to operat e this equipm ent.
Page 2 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. 2 . Re gulat ory and Sa fet y Com pliance . Eu rope an Union. 2 .1 De cla rat ion about per form e d test s. The Mit sum i m odule WML- C46# # # is wireless dat a t ransm ission system . This ‘Bluetoot h’ m odule can be int egrated int o various end product s. MI TSUMI declares that The Mitsumi m odule WML- C46# # # com plies with the follow ing direct ive and standards: Directive 1 9 9 9 / 5 / EG (R&TTE Direct ive) : EN 3 0 0 3 2 8 - 2 V1 .2 .1 ( 1 1 - 2 0 0 1 ) , Radio Equipm ent and Syst em s ( RES) ; Wideband transm ission syst em s; Technical charact eristics and t est condit ions for data transm ission equipm ent operating in the 2,4 GHz I SM band and using spread spect rum m odulat ion techniques. Part 2: Harm onized EN covering essent ial requirem ent s under art icle 3( 2) of the R&TTE direct ive. EN 3 0 1 4 8 9 - 0 1 V1 .3 .1 ( 0 9 / 2 0 0 1 ) , Electrom agnet ic Com pat ibility and radio spect rum Mat t ers (ERM) ; ElectroMagnetic Compat ibilit y ( EMC) standard for radio equipm ent and services; Part 1: Com m on t echnical requirem ent s EN 3 0 1 4 8 9 - 1 7 V1 .1 .1 ( 0 9 - 2 0 0 0 ) , Electrom agnet ic Com pat ibility and radio spect rum Mat t ers (ERM) ; ElectroMagnetic Compat ibilit y ( EMC) standard for radio equipm ent and services; Part 17: Specific conditions for wideband data HyperLAN equipment We hereby declare that the human exposure of the Mit sum i m odule WML-C46# # # is below the SAR lim its specified in t he EU recom m endat ion 1999/ 519/ EC ( t he applicable limit s are specified in table 1 wit h 2W/ kg) . The technical docum entation as required by the Conform ity Assessm ent procedure is kept at the following address : 2-11-2,TSURUMAKI ,TAMA- SHI ,TOKYO,206- 8567 JAPAN. MI TSUMI ELECTRI C CO.,LTD. ACCESS DEVI CE ENGI NEERI NG DEPT. I NTERFACE EQUI PMENT BUSI NESS DI VI SI ON COMPONENT DEVI CES BUSI NESS HQ TEL: + 81-42- 310- 5829 FAX: + 81-42-310- 5582
Page 3 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. 2 .2 La be lling CE conform it y m arking for product . OEM product / applicat ion, where t his radio m odule is int egrat ed/ installed in , has to be labelled in accordance to R&TTE direct ive, Article 12. An auxiliary label is included in t he packaging t o the radio m odule, which can be used for that purpose and has to be perm anent ly affixed to the OEM product/ applicat ion, ot herwise OEM product m ust be approved separat ely. Regulatory inform ation on the OEM devise should cont ain labelling t hat : Appr oved in accordan ce to R& TTE dire ct ive t ransm itt er m odule m ar k ed by CE, m a nufact ure d by M I TSUMI in corpora t e d to OEM product . More det ail inform at ion present below in chapter 5. 3 . FCC Regulat ory I nform a t ion The Federal Com m unicat ion Com m ission Radio Frequency I nterference Statem ent includes t he following paragraph: This equipm ent has been test ed and found to com ply wit h the lim it s pursuant t o Part 15 of the FCC Rules. These lim its are designed t o provide reasonable prot ect ion against harm ful interference in a resident ial inst allat ion. This equipment generates, uses and radiat es radio frequency energy and, if not inst alled and used in accordance wit h the instructions, m ay cause harm ful interference t o radio com m unicat ion. However, t here is no guarantee t hat interference will not occur in a part icular installat ion. I f t his equipm ent does cause harm ful interference t o radio or t elevision recept ion, which can be determ ined by t urning t he equipm ent off and on, the user is encouraged t o try to correct t he interference by one or m ore of the follow ing m easures: - Reorient or relocate t he receiving ant enna. - I ncrease the separation bet ween the equipm ent and receiver. - Connect the equipm ent into an out let on a circuit different from t hat t o which t he receiver is connect ed. - Consult the dealer or an experienced radio / TV t echnician for help. FCC RF Radiation Exposure Stat em ent : This device com plies wit h FCC radiat ion exposure lim it s set forth for an uncont rolled environm ent. End users m ust follow t he specific operat ing instruct ions for sat isfying RF exposure com pliance. This transm itt er m ust not be co- locat ed or operating in conjunction with any other antenna or transm it t er.
Page 4 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Not Authorized m odificat ion could void aut hority to use t his equipm ent . 3 .1 Labe lling. MI TSUMI m odule WML-46# # # labelled as below. Module internal Antenna FCC Regulat ory inform ation. OEM devise should contain labelling t hat: Approved in accordance t o FCC rules transm it ter module m arked by FCC- I D POOWML- C46 label, m anufactured by MI TSUMI incorporat ed t o OEM product. When its not possible, in user m anual should be included such inform at ion. For ex am ple : “This device com plie s w it h Pa rt 1 5 of t he FCC Rules. Opera t ion is subj ect t o t he follow ing tw o conditions: ( 1 ) t his de vice m ay not ca use ha rm ful int e rfer ence , a nd ( 2 ) t his de vice m ust accept a ny int e rfer e nce rece ived, including int e rfer ence t hat m a y cause unde sired ope ra t ion.” This device cont a ins FCC- I D POOW M L- C4 6 MITSUMI Company LogoModule’s Serial Number
Page 5 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. This label will be placed on the final product , clearly visible to all persons exposed to the t ransm it t er. The specific location on the final product will be consist ent wit h each sam e final product, but will vary in locat ion across various final product s, and in any case will always be clearly visible t o all persons exposed t o t he transm itt er. The physical size of the label and font size of the let t ering w ill be dependent on t he size of t he final product, but in any case will always be clearly visible t o all persons exposed t o t he transm itt er. 3 .2 Antenna im plem e nt ation n otes. Any antenna of a sim ilar t ype wit ch list ed in antenna declarat ion m ay be used wit hout retest ing. Use of an antenna of a different t ype t han the tested antenna or one that exceeds the gain of a t est ed ant enna would require retest ing and new approval by either a Telecom m unicat ion Cert ificat ion Body or t he Com m ission. Manufacturers OEM would be expect ed to supply a list of acceptable antenna types wit h applicat ions for equipm ent authorizat ion. The external ant ennas are described as following. Model Name Manufacturer Max.Gain [dBi] ANT8030-2R4-01 TDK 2.0 Radio m odule WML- 46# # # can be incorporat ed into m any different devices. The m odules gener ally consist of a com plet ely self- cont ained radiofr equency transm itt er m issing only an input and a power source to m ake it functional. Once the m odules are aut horized by the Com m ission under our cert ificat ion procedure, they m ay be incorporated into a num ber of host devices such as, PCs or PDAs, which have been separat ely authorized. The com plet ed product generally is not subject to requirem ent s for further cert ificat ion by t he FCC. More det ail inform at ion present below in chapter 5. 4 . Othe r regulat ory not es for OEM . Modular transm itt ers save m anufact urers the tim e and any relat ed expenses that would be incurred if a new equipm ent aut horizat ion w ere needed for t he sam e transm itt er when it is installed in a new device. This m eans t hat it can be int egrat ed into end products wit hout further t est ing or approval list ing. The m anufacturer m ust state the MI TSUMI part num ber and product reference in his lit erat ure in order to m eet the requirem ent s of t he Bluetooth and regulat ory. This should be clearly indicated in the OEM m anuals. The purchaser / int egrator ( developer) m ust satisfy all relevant FCC, SAR, EMC and Radio regulat ions which apply to their finished product. We believ e such parties have the technical com pet ence to ensure that t he system s t hey deploy continue to com ply wit h all those rules.
Page 6 of 6 WML-C46###_User_Manual Feb. 13. 2006 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Furt her inform at ion and guidance on t his subj ect and other equipm ent authorizat ion m att ers can be found under - Regarding FCC regulat ory inform ation on the FCC’s websit e at : www.fcc.gov/ oet / info/ database/ let t ers/ . - Regarding R&TTE direct ive htt p: / / europa.eu.int/ com m / ent erprise/ rt t e/ dir99-5.htm 5 . A se par at e approval. A separ at e approval of the device into w hich t he m odule is incorporat ed is only required when it cannot be insured that the condit ions on the m odule grant will be m et. The purchaser m ust sat isfy all relevant FCC, EMC and Radio regulations R&TTE directive which apply t o their finished product.

Navigation menu