Spectrum 450202ZIG OHM Zigbee V.2 User Manual Kwikset Convert ZigBee indd

Download:
Mirror Download [FCC.gov]
Document ID	3571000
Application ID	/LT9xXPlCHSXPNYyXkz7MA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	264.39kB (3304831 bits)
Date Submitted	2017-09-20 00:00:00
Date Available	2017-09-20 00:00:00
Creation Date	2017-06-07 11:01:49
Producing Software	Acrobat Distiller 17.0 (Windows)
Document Lastmod	2017-06-07 11:01:49
Document Title	Kwikset Convert ZigBee.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	SAD0418

66492-001
Rev 02
914C
ZigBee
Parts in the box
Kit "A"
Black mounting
plate
Kit "B"
Gold mounting
plate
Kit "C"
Gold adapter
Silver mounting
plate
Silver adapter
ENGLISH
Black adapter
Black adapter
Mounting
plate screws
Interior assembly
screws
Installation and User Guide
Mounting
plate screws
Interior assembly
screws
Interior cover
screws
Gold adapter
Mounting
plate screws
Interior assembly
screws
Interior cover
screws
Interior cover
screws
Tools needed
Interior
cover
Kwikset Technical Support
Phillips head screwdriver
Interior
assembly
Battery pack and
4 AA batteries
Existing key
1-866-863-6584
www.kwikset.com
Ruler
Optional: Masking tape
Begin with your smart home app
If you will be using a smart home app with your lock, download the app and set up
your controller or hub before proceeding further with lock installation.
Prepare your door
Make sure your existing deadbolt is compatible. If you have a standard deadbolt mounted
separately from the handle below it, it is compatible with Kwikset Convert.
Compatible
Not Compatible
Not Compatible
Rim
Lock
Measure to confirm that your door is either
1-3/8" or 1-3/4" (35 mm or 44 mm) thick.
Make sure your door is open and
extend your latch bolt. Make sure your
key is NOT in the deadbolt exterior.
Integrated
Interior
Optional: Secure your deadbolt
exterior with masking tape.
Make sure your door is aligned before
proceeding with installation.
You should be able to lock and
unlock your door smoothly
without any resistance, and
without pushing, pulling
or lifting your door.
Not Compatible
Mortise
Lock
If your door is not aligned, you
may need to order a Warped
Door Service Kit, available
through Kwikset Support:
1-866-863-6584
Remove all existing deadbolt hardware
from the interior side of your door.
extended
1-3/8"or 1-3/4"
35 or 44 mm
For a list of compatible deadbolt
models, please see the Kwikset
Convert page at www.kwikset.com
Determine the parts needed for your door
Look into the hole in your door.
What shape is your torque blade (the part sticking out through the latch)?
D-shape
Vertical rectangle
Kwikset and Weiser deadbolts:
Baldwin Estate deadbolts:
Schlage deadbolts:
Schlage deadbolts:
Use kit “A” for your door.
Use kit “B” for your door.
Use kit “C” for your door.
Use kit “C” for your door.
You will need the gold adapter
and the thinner gold screws.
You will need the silver adapter.
You will need the gold adapter.
Baldwin Reserve and
Baldwin Prestige deadbolts:
Slanted rectangle
thinner
screws
Use kit “B” for your door.
You will need the black adapter
and the thicker gold screws.
thicker
screws
1/4
Horizontal rectangle
4
Install the mounting plate and test your latch
Place the mounting plate on the door so that the torque
blade inserts through the center hole.
Secure the mounting plate with the mounting screws.
Keep parallel to the
edge of the door.
Kwikset & Weiser Only:
To determine which mounting
screws to use, test one of
the thicker screws first.
If the thicker screw fits, continue
installing the thicker screws.
If the thicker screw doesn't fit,
install the thinner screws.
torque blade
Tighten
screws evenly.
Note: A D-shaped torque blade is shown, but installation is the same for all models.
Remove the masking tape from the exterior deadbolt, and insert
your key and test the latch for smooth operation.
Remove your key and make sure the bolt is fully extended.
fully
extended
If the latch does not
extend or retract
smoothly, adjust the
mounting screws.
actual
size
Install the interior assembly
Remove the interior cover and battery pack.
Make sure the
turnpiece is in the
vertical position.
Remove the
interior cover.
Make sure shaft is oriented
as shown. If needed, rotate
the shaft to this position.
Remove the battery pack.
Stripe should
be vertical.
Do not
install
batteries
yet.
vertical
Install the adapter on the interior assembly.
Silver adapter:
Tab is on bottom.
back view
of interior
assembly
Gold adapter:
Keep slot vertical.
Press adapter firmly onto
the interior assembly.
align tabs
Black adapter:
Curve is on top.
Align the adapter with the torque blade and push the interior assembly
onto the mounting plate.
Secure with two (2) interior assembly screws.
Schlage Deadbolts Only:
bottom
hole
You may need to rotate
the adapter to align with
the torque blade.
2/4
6
Perform the door handing process
This step will teach the lock the orientation of your door and is crucial for lock operation.
Install 4 AA batteries
in the battery pack.
Make sure the door is open. Insert the battery pack
while PRESSING AND HOLDING the Program button.
The Status LED will flash red and
green, and the lock will beep.
Press and release the Program
button again.
Keep pressing the button for three seconds after the
battery pack is installed, then release the button.
The latch bolt will retract and extend on its own
to learn the orientation of the door. Did the
Status LED turn green or red?
Metal
contacts
at bottom,
facing out.
Green: Door handing
successful. Continue
to step 7.
Red: See “Red Status
LED” below.
Ensure correct polarity.
For best results, use new,
non-rechargeable Alkaline
batteries only.
status LED
If the bolt does not move, make sure
the batteries are installed correctly,
and perform steps 6A-6D again.
Red Status LED
BALDWIN ESTATE DEADBOLTS:
OTHER DEADBOLTS:
If your latch bolt is to the RIGHT of your interior assembly, and the
Status LED is solid red after door handing, press and release the
Program button again. The door handing process will restart.
If the Status LED is solid red after door handing, make sure
the batteries are installed correctly and the lock interior
is correctly installed. Perform steps 6A-6D again.
Right
If you are unsure if your lock is Baldwin Estate, see
chart on page 1 or compatible deadbolt list online.
Confirm the lock status
The Status LED blinks every six seconds to communicate
whether the door is locked or unlocked.
If the Status LED is displaying the
wrong lock status, flip switch #4.
Switch #4
Amber:
Locked
Green:
Unlocked
Pair the lock with your smart home system
Initiate the pairing process through
your smart home system (either
through your smart home app, at your
panel, or at your controller or hub).
When prompted by your smart home system
to initiate pairing at the lock, press button
“A” on the lock interior four times.
Refer to your smart home system
instructions for more information.
button “A”
button “B”
If successful, re-name the lock in your system (if applicable).
If unsuccessful, press button “B” nine times.
Perform steps 8A-8C again.
If still unsuccessful, follow your smart home system's
instructions to remove (exclude/unpair) the lock from
any other network. Then perform steps 8A-8C again.
actual
size
Install the interior cover
Important Information about the interior cover
The window
on the interior
cover is locked
by default to
prevent someone
from tampering
with your lock's
settings.
window
If you wish to unlock
the window, you can
slide it up for more
convenient access
to the programming
buttons while the
cover is installed.
To unlock the
window, remove
the security screw.
Cover Installation:
Install cover.
Install screws.
Note: You may need to
rotate the turnpiece to align
with the turnpiece shaft.
Note: The interior cover and
screws must be removed
for battery pack access.
turnpiece
shaft
3/4
Reference Guide
Switches
Kwikset Convert at a Glance
These features can be adjusted
in some smart home apps.
Button “A”
Back panel
Program button
2 3 4
on off
Button “B”
Switches
Status LED
1. Status LED
3. Audio
Door lock status LED blinks every 6
seconds. ON position is factory default.
Beeping sound is heard during
programming and normal operation.
ON position is factory default.
2. Auto-Lock
Turnpiece shaft
Automatically re-locks door 30
seconds after unlocking. OFF
position is factory default.
CAUTION: With this feature
enabled, it is possible to lock
yourself outside.
Status LED Notifications
4. Invert
Only used if the Status LED is
communicating the opposite
door lock status.
Factory Reset
A factory reset will remove your lock from your smart home system.
1 Remove
battery
pack.
2 Press and HOLD the Program
button while reinserting
the battery pack.
Keep holding the button for 30
seconds until the lock beeps
and the status LED flashes red.
Amber flash
Door is locked
Green flash
Door is unlocked.
3 Press the Program
button once more.
When the LED flashes
green and you hear
two beeps, the lock
has been reset.
Red flash
The 4 AA batteries
in the interior are
low and need to be
replaced.
Status
LED
4 Perform the door handing
process again to teach the
lock the orientation of the
door and pair the lock to
your smarthome system.
Network Information
Removing the lock from the network
ZigBee System Notes
Press button “B” on the lock interior nine times.
ZigBee is a “Wireless mesh network,” and results may vary
based on building construction and communication path,
with 35+ feet being typical installed distance in a standard
home environment and 250 feet+ when the lock has a clear
line of sight with the smart home controller or hub. It may be
necessary to install additional ZigBee devices to enhance the
communication path between the lock and controller/hub for a
more robust ZigBee network.
Important Safeguards
1.
2.
3.
4.
5.
Read all instructions in their entirety.
Familiarize yourself with all warning and caution statements.
Remind all family members of safety precautions.
Always have access to your lock’s standard key.
If using the Auto-Lock feature, make sure to have your
standard key with you to prevent locking yourself out.
6. Replace low batteries immediately.
CAUTION: Prevent unauthorized entry. Restrict access to your lock’s
back panel and routinely check your settings to ensure they have not
been altered without your knowledge.
WARNING: This Manufacturer advises that no lock can provide
complete security by itself. This lock may be defeated by forcible
or technical means, or evaded by entry elsewhere on the property.
No lock can substitute for caution, awareness of your environment,
and common sense. Builder’s hardware is available in multiple
performance grades to suit the application. In order to enhance
security and reduce risk, you should consult a qualified locksmith or
other security professional.
4/4
© 2017 Spectrum Brands, Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : SAD0418
Create Date                     : 2017:06:07 11:01:49-07:00
Modify Date                     : 2017:06:07 11:01:49-07:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 17.0 (Windows)
Format                          : application/pdf
Title                           : Kwikset Convert ZigBee.indd
Creator                         : SAD0418
Document ID                     : uuid:5c42d0eb-ee72-4fbe-bc87-69d8b14216b6
Instance ID                     : uuid:b6532833-2528-4c0e-a692-3508a9608735
Page Count                      : 4

EXIF Metadata provided by EXIF.tools