Symbol Technologies WSAP5100 WLAN Access Port User Manual AP300iQRG008
Symbol Technologies Inc WLAN Access Port AP300iQRG008
Contents
users manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 468325 |
| Application ID | l5vg2vYrazte+gGksbHgfA== |
| Document Description | users manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.02kB (862778 bits) |
| Date Submitted | 2004-09-13 00:00:00 |
| Date Available | 2004-09-08 00:00:00 |
| Creation Date | 2002-06-25 10:22:23 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2004-06-11 09:16:17 |
| Document Title | AP300iQRG008.fm |
| Document Creator | FrameMaker 7.0 |
AP 300 802.11a/b/g Access Port Internal Antenna Model Quick Reference Guide AP 300 Quick Reference Guide FINAL.Not for distribution. Copyright © 2004 SYMBOL TECHNOLOGIES, INC. All rights reserved. All rights reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Symbol Technologies, Inc. (Symbol). The material in this manual is subject to change without notice. Symbol reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication, estoppels, or otherwise under any Symbol Technologies, Inc., intellectual property rights. An implied license only exists for equipment, circuits and subsystems contained in Symbol products. Symbol, the Symbol logo and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Patents This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562; D436,104. Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 rev. 06/02 Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com 1 FINAL.Not for distribution. Introduction The AP 300 Access Port, a component of the Symbol Wireless Switch System, links wireless 802.11a/b/g devices to the switch, enabling incremental growth of your wireless network with a cost-effective alternative to standard access points. For optimal performance, the AP 300 provides two placement options: wall and ceiling. Wall mount slots fit onto two screws provided; marks on the AP 300 case guide placement of the screws. Clips on the back of the case fit onto a suspended ceiling T-bar. The AP 300 receives all power and transfers data through the same CAT-5 cable without any strain relief. There is no additional power supply. Technical Specifications Operating Voltage 48VDC typical; 36-57VDC Power Over Ethernet range 10mA to 165mA 250mA -20°C to 50°C (-4°F to 122°F) Operating Current Peak Current Operating Temperature Operating Humidity 5% to 95% non-condensing Storage Temperature -40°C to 70°C (-40°F to 158°F) Storage Humidity 85% Altitude 2438m (8,000ft.) 4572m (15,000ft.) Drop 91cm (36in.) to concrete Electrostatic +/-15kV air; +/-8kV contact; Discharge +/-2kV pin Dimensions & Weight Length Width Height Weight 21.1cm (8.31in) 17.1cm (6.74in.) 5.1cm (2.0in.) 0.45kg (1.0lbs) maximum operating maximum storage Without antenna modules 2 AP 300 Quick Reference Guide FINAL.Not for distribution. Radio Characteristics The AP 300 is an IEEE 802.11a/b/g-compliant device with the appropriate radio option configured. The table below shows the characteristics for each device compliance. Device Mbps Data Rate Support Utilizing Diversity 802.11a GHz 6, 9, 12, 18, 24, 36, 48, Transmit and and 54 receive 4.9 to 5.875 range 802.11g* 1.0, 2.0, 5.5, 6, 9, 12, 18, Transmit and 2.4 to 2.5 ISM range 24, 36, 48, and 54 receive *The supported 802.11g modes include either CCK only or OFDM only. Package Contents The AP 300 package contains the following items: • AP 300 Access Port • Two wide-shoulder screws 3 FINAL.Not for distribution. Description The AP 300 has two radios capable of concurrent 802.11a/b/g radio configurations. The AP 300 takes power from any 802.3af-compatible Power Over Ethernet (PoE) switch or power injector. Features Top View Bottom View Safety Cable Tie Point RJ-45 T-bar Mount Lock Port Mount Slot Mount Slot T-bar Mount Alignment Arrows LEDs • • • • • • One RJ-45 connector LED indicators Point for a safety cable loop Kensington© Lock Port Slots for wall mounting Clips for ceiling T-bar mounting The AP 300 has one RJ-45 connector for a 10/100 Ethernet port connecting to a wireless switch with a standard CAT-5 cable, straight through or cross-over, without any strain relief. Safety Cable Tie Point RJ-45 Connector Lock Port 4 AP 300 Quick Reference Guide FINAL.Not for distribution. The AP 300 receives power through the Ethernet cable, optionally connected to a Port Power Injector—for example, Symbol Model APPSBIAS-T-12-AF Power Injector 12 Port. See the Symbol web site for available PoE devices. Review installation plans to determine device placement and cable routing. The AP 300 Access Port comprises two 802.11 radios: an 802.11b/g radio operating in the 2.4 to 2.5GHz band and an 802.11a radio operating in the 4.9 to 5.875GHz band. Each radio has an embedded controller which runs local firmware used to perform the functions of the lower 802.11 MAC. All upper MAC functions and MAC management are controlled by the Wireless Switch. Motherboard firmware enables the AP 300 to boot after either a power up or a watchdog reset. After self-boot, the motherboard sends an “I am alive” message into the network to be adopted and loaded with the actual runtime code. The boot firmware on the motherboard and the firmware downloaded from the switch can be modified via the Ethernet interface from either the Wireless Switch or by other Symbol diagnostic software tools. LED Indicators The LED activity indicators on the top of the case provide a status display indicating error conditions, transmission, and network activity for the 802.11a (amber) radio or the 802.11b/g (green) radio. 802.11a Activity LED Amber Booting Normal Error The amber LED flashes three times per second until firmware is loaded. During boot, no 802.11a mobiles can associate. After adoption, the amber LED is steady or flashes with 802.11a radio traffic. The amber LED flashes once per second if an error prevents the 802.11a radio from operating normally. 802.11b/g Activity LED Green Booting Normal Error The green LED flashes three times per second until firmware is loaded. During boot, no 802.11b/g mobiles can associate. After adoption, the green LED is steady or flashes with 802.11b/g radio traffic. The green LED flashes once per second if an error prevents the 802.11b/g radio from operating normally. 5 FINAL.Not for distribution. Installation Instructions The AP 300 mounts either on a wall with wide-shouldered screws included or on a suspended ceiling T-bar. Before Beginning Perform the following: • Match the model number on the purchase order with the model numbers in the packing list and on the case of the device shipped. • Verify that the contents of the box include the intended AP 300 and the mounting hardware: Item Notes WSAP-5030-300-WW 802.11a/b/g configuration. Mounting Hardware: Two wide-shoulder Phillips pan head self-tapping screws. • Review site survey and network analysis reports to determine the location and mounting position for the AP 300. Wall Mounting In the procedure below, hang the AP 300 Access Port along its length or width using the slots on the bottom of the unit. Hardware • • • • • A CAT-5 cable connected to a compatible Symbol wireless switch—for example, the WS 2000 or WS 5000—with sufficient slack and without a molded or integrated strain relief on the connector to the AP 300 Two wide-shoulder Phillips pan head self-tapping screws (provided) Case: In the procedure, use the arrows on the back of the AP 300’s case as a guide to determine the proper placement for the unit’s mounting screws. Safety cable (recommended) Security cable (optional) Procedure 1. Orient the case on the wall by its length or width. 6 AP 300 Quick Reference Guide FINAL.Not for distribution. 2. Using the arrows on the bottom edge of the back of the case as guides, move the edge to the midline of the mounting area and mark points on the midline for the screws. 3. At each point, screw in the self-tapping screws and stop where the threads meet the shank or shoulder of the screw. 4. If required, install the recommended safety cable—steel with a diameter at least .15cm (.06in.)—and a security cable, and attach them to the unit. 5. Place the middle of each of the case’s mount slots over the screw heads. 6. Slide the case down along the mounting surface to hang the case’s slots on the screw heads. 7. Plug the Ethernet cable into the LAN port. 8. Verify the unit has power by observing that the LEDs are lit or flashing. Suspended Ceiling T-Bar Mount In this procedure, hold and twist the AP 300 on a T-bar of a suspended ceiling grid, clicking the case into place. Hardware • • • A CAT-5 cable connected to a compatible Symbol wireless switch—for example, the WS 2000 or WS 5000—with sufficient slack and without a molded or integrated strain relief on the connector to the AP 300 Safety cable (recommended) Security cable (optional) Procedure 1. If required, install the recommended safety cable—steel with a diameter at least .15cm (.06in.)—to the safety cable tie point and a security cable to the unit’s lock port. 2. Plug the Ethernet cable into the LAN port. 3. Face the bottom of the T-bar with the back of the case. 4. Orient the case by its length and the length of the T-bar. 5. Rotate the case in place 45 degrees counter-clockwise, or about 10 o’clock. FINAL.Not for distribution. 6. Push the back of the case onto the bottom of the T-bar. 7. Rotate the case 45 degrees clockwise. The clips click as they fasten to the T-bar. 8. Verify the unit has power by observing the LEDs. 8 AP 300 Quick Reference Guide FINAL.Not for distribution. Customer Support Symbol Technologies provides its customers with prompt and accurate customer support. Use the Symbol Support Center as the primary contact for any technical problem, question or support issue involving Symbol products. If the Symbol Customer Support specialists cannot solve a problem, access to all technical disciplines within Symbol becomes available for further assistance and support. Symbol Customer Support responds to calls by e-mail, telephone or fax within the time limits set forth individual contractual agreements. When contacting Symbol Customer Support, please provide the following information: • Device serial number • Product name or model number • Software type and version number North American Contacts Inside North America, contact Symbol at: Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 Telephone: 1-631-738-2400/1-800-SCAN 234 Fax: 1-631-738-5990 Symbol Support Center (for warranty and service information): Telephone: 1-631-738-6213/1-800-653-5350 Fax: (631) 563-5410 E-mail: support@symbol.com International Contacts Outside North America, contact Symbol at: Symbol Technologies, Inc. Symbol Place Winnersh Triangle, Berkshire, RG41 5TP United Kingdom 0800-328-2424 (Inside UK) +44 118 945 7529 (Outside UK) FINAL.Not for distribution. Web Support Sites MySymbolCare http://www.symbol.com/services/msc Symbol Services Homepage http://symbol.com/services Symbol Software Updates http://symbol.com/services/downloads Symbol Developer Program http://software.symbol.com/devzone Symbol Knowledge Base http://kb.symbol.com/register.asp Additional Information Obtain additional information by contacting Symbol at: • 1-800-722-6234, inside North America • +1-631-738-5200, in/outside North America • http://www.symbol.com/ 10 AP 300 Quick Reference Guide FINAL.Not for distribution. Legal Information Regulatory All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. This device is to be used only with Symbol Technologies Wireless Switch. Applying the Regulatory Country Stamp Regulatory labels are applied to the device signifying the radio(s) are approved for use in the following countries: United States, Canada, Australia, Japan & Europe 1,2. Note 1: For 2.4GHz Products: Europe includes, Austria, Belgium, Croatia, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Note 2: The use of 5GHz RLAN's has varying restrictions of use; please refer to the Symbol Declaration of Conformity (DoC) for details at http:/ /www2.symbol.com/doc/. In addition to the list above other countries may require a regulatory stamp to be affixed to the product. Please refer to www.symbol.com/ for the list of countries where mandatory stamps are required. For countries that require regulatory label, a sheet of stamps may be enclosed within the package. If the appropriate stamps are not provided, please contact your supplier. To apply the country stamp: 1. Peel the stamp appropriate to the country where this device is to be used. 2. Apply the country stamp in the space provided on the regulatory label. Caution: Operation of the device without a regulatory label or the correct country Stamp is illegal. 11 FINAL.Not for distribution. FCC RF Exposure Guidelines Safety Information Caution: The device complies with internationally recognized standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. It is advisable to use the device only in the normal operating position. Remote and Standalone Antenna Configurations. To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktops of similar configurations must operate with a minimum separation distance of 20cm from all persons. Radio Frequency Interference Requirements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 12 AP 300 Quick Reference Guide FINAL.Not for distribution. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area (EEA) The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions: • In the range of 2.400GHz -2.4835GHz, the maximum radiated transmit power is 100mW EIRP. • In France, the equipment is restricted to the range 2.4465GHz to 2.4835GHz. • For Belgium outside usage, the equipment is restricted to the range 2.460GHz to 2.4835 GHz. • Italy requires a user license for outside usage. The use of 5GHz RLAN's has varying restrictions for use within the EEA; please refer to the Symbol Declaration of Conformity (DoC) for details at http:// www2.symbol.com/doc/ Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/ Other Countries Mexico–Restrict Frequency Range to: 2.450GHz - 2.4835GHz. Israel–Restrict Frequency Range to: 2.418GHz - 2.457GHz. Sri Lanka–Restrict Frequency Range to: 2.400GHz - 2.430GHz. Tested to Comply With FCC Standards For Home or Office Use Symbol Technologies Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2004:06:11 09:16:17Z Create Date : 2002:06:25 10:22:23Z Creator : FrameMaker 7.0 Page Count : 14 Creation Date : 2002:06:25 10:22:23Z Mod Date : 2004:06:11 09:16:17Z Producer : Acrobat Distiller 5.0.5 (Windows) Metadata Date : 2004:06:11 09:16:17Z Title : AP300iQRG008.fm Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools