TAKAYA TR3-C202-A0-8 RFID Reader/Writer User Manual TDR MNL C202 A0 8 EN 101
TAKAYA Corporation RFID Reader/Writer TDR MNL C202 A0 8 EN 101
TAKAYA >
Contents
- 1. Manual
- 2. User Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1466862 |
| Application ID | HzOJ5t1qRtZ3ZiSZk8EgKA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 68.23kB (852827 bits) |
| Date Submitted | 2011-05-17 00:00:00 |
| Date Available | 2011-11-14 00:00:00 |
| Creation Date | 2011-04-14 14:51:28 |
| Producing Software | PrimoPDF |
| Document Lastmod | 2011-04-27 11:23:28 |
| Document Title | Microsoft Word - TDR-MNL-C202-A0-8-EN-101.doc |
| Document Creator | PrimoPDF http://www.primopdf.com/ |
| Document Author: | simazu_dai |
User’s Manual TR3-C202-A0-8 Manual No.TDR-MNL-C202-A0-8-EN-101 Introduction Thank you for purchasing a TR3-C202-A0-8 RFID READER/WRITER. Be sure to read this manual before using the product. After reading it, store the manual in a convenient place for future reference. Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series Regulations and Standards FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart C of the FCC Rules. FCC ID : MK4TR3-C202-A0-8 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The following sentence has to be displayed on the outside of the device in which the transmitter module is installed : “Contains FCC ID: MK4TR3-C202-A0-8” Japan Radio Law Equipment using high frequencies: Inductive Reading/Writing Communications Equipment Conforming standards: Inductive Reading/Writing Communications Equipment; Standard: ARIB STD-T82 Tags This product can communicate the standard tags of ISO/IEC15693 and ISO/IEC18000-3(Mode1). Supports Manufacturer Tag-it HF-I Texas Instruments my-d Infineon Technologies NXP Semiconductors I･CODE SLI MB89R118 FUJITSU Japan RoHS is support Restriction of Hazardous Substances Waste Dispose of the Products as industrial waste. Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series Safety Precautions The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of this product. The precautions provided here contain important safety information. Be sure to observe these precautions. The following signal words are used in this manual. Failure to comply with a WARNING may result in serious injury or death. Failure to comply with a CAUTION may result in injury to the operator, or damage to the items involved. Be sure to observe the following precautions to ensure safe use of the Products. Decomposition of this product and cable, repair, remodeling, please strictly prohibited. There is the possibility of fire or electric shock injuries. This product is using the RFID reader writer radio equipment. Therefore, depending on where the applications you use may affect medical equipment. To minimize the impact of medical equipment for use, please observe the following countermeasure. The Japan Automatic Identification Systems Association (JAISA) guidelines are as follows: RFID antennas from implanted cardiac pacemakers or other medical devices please 22cm apart. We recommend that you paste "RFID sticker" at equipment. ← RFID Sticker Be sure to observe the following precautions to ensure safe use of the Products. Installation and storage environment 1. Do not use the Products in sunlight. 2. Do not use the Products in environment of spray of water, oil or chemicals. 3. Do not use the Products in environments with flammable, explosive, or corrosive gasses. 4. Do not use the Products in environment of hot humid. 5. Do not use the Products in environment of vibration or shock. 6. Do not use the Products in environment of condensation. 7. Do not use the Products in environment of around the metal is covered. 8. Do not use the Products in environment of high temperature. 9. Do not use the Products in environment that has a device that generates magnetic field and shock voltage. 10. Do not use the Products in unstable place. 11. If there is failure, discontinue use immediately, please contact us or the distributor. Installation 1. Turn off the power before installation or removing. 2. The following effects may not work correctly. ･ Near 13.56MHz radio device ･ Near speakers , Inverter, motor and Plasma Display 3. The communication range may vary due to environment and conditions. Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series Contents Product Overview ................................................................ ................................................................................................ ...................................................................... ...................................... 1 1.1 Features .............................................................................................................................................. 1 Names of Parts and Functions ................................................................ ..................................................................................... ..................................................... 2 2.1 TR3-C202-A0-8 ................................................................................................................................... 2 2.2 Antenna .............................................................................................................................................. 3 2.2.1 TR3-A202 ........................................................................................................................................ 3 2.2.2 TR3-A302 ........................................................................................................................................ 4 2.2.3 TR3-A401 ........................................................................................................................................ 4 Installation and connection ................................................................ ......................................................................................... ......................................................... 5 3.1 Installation into a host device .............................................................................................................. 5 3.1.1 Installation from the Front.................................................................................................................. 5 3.2 Antenna installation into a host device................................................................................................. 6 3.2.1 Screw holes ...................................................................................................................................... 6 3.2.2 Guide ............................................................................................................................................... 6 3.3 Connection .......................................................................................................................................... 7 3.3.1 Attaching the Cable and Antenna ........................................................................................................ 7 3.3.2 Direct connection to the Host Device Interface .................................................................................... 7 3.3.3 Using the interface board to connect to the Host Device Interface.......................................................... 8 Specifications ................................................................ ................................................................................................ ............................................................................. ............................................. 9 4.1 TR3-C202-A0-8 ................................................................................................................................... 9 4.2 Antenna ............................................................................................................................................ 14 4.2.1 TR3-A202 ...................................................................................................................................... 14 4.2.2 TR3-A302 ...................................................................................................................................... 15 4.2.3 TR3-A401 ...................................................................................................................................... 16 4.3 Cable................................................................................................................................................. 17 Maintenance ................................................................ ................................................................................................ ............................................................................ ............................................ 18 Revision History................................ ................................................................ ................................................................................................ ............................................................................. ............................................. 19 3.1.2 Installation from the Front deleted........................................................................................................ 19 Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 1 Product Overview 1.1 Features 1 Product Overview 1.1 Features This product uses the 13.56MHz frequency. This product is the electromagnetic induction type non-contact IC can read and write RFID tag data. This Product is designed to be embedded and integrated within OEM devices and finished products such as label printers, cashless payment terminals or any other device that can benefit from integrated RFID capabilities. Host Device Interface RS-232C、LAN(TCP/IP)、USB Interface UART(CMOS Level) READER/WRITER Load Settings CPU Memory Save Settings RF-ASIC Communications Multiplexer Antenna Tags Antenna Antenna ■ Conform to international standards ISO/IEC15693 and ISO/IEC18000-3(Mode1) is supports. ■ Rich Products Various interface RS-232C, USB, TCP/IP. Antennas of various sizes ■ Software TR3-series common communication protocol Software Development Kit ■ Multiplexer Select the RF output. ■ Useful Continuous inventory mode UID of the tag automatically sends Host Device. RDLoop mode UID or User Data of the tag automatically sends Host Device. For more information please refer to the TR3-PROTOCOL manual. ■ Environmentally EU RoHS(2002/95/EC) Support Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.1 TR3-C202-A0-8 2 Names of Parts and Functions 2.1 TR3-C202-A0-8 ③ ① ④ ② ⑤ ⑥ ⑦ No ① ② Name Screw holes STUD NUTS ③ ④ ⑤ LED1 CN1 Nameplate Description M3 holes Internally, substrate is fixed at stud nats. M3 Screw hole depth : 3mm Displays the status of this product. This connector is for connection to the host. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ⑥ ⑦ FCC ID stickers CH1 to CH8 Connect the antenna cable. Please connect form CH1. Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.2 Antenna 2.2 Antenna 2.2.1 TR3-A202 ① ② ③ ④ No ① ② Name CN1 Nameplate Description Connect the antenna cable. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ Inspection mark Screw holes M3 holes Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.2 Antenna 2.2.2 TR3-A302 ① ② ④ ③ No ① ② ③ Name Inspection mark Screw holes Nameplate Description M3 holes Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ④ 2.2.3 CN1 TR3-A401 ① No ① ② Connect the antenna cable. Name CN1 Nameplate ② ③ Description Connect the antenna cable. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ Inspection mark Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 3 Installation and connection 3.1 Installation into a host device 3 Installation and connection 3.1 Installation into a host device 3.1.1 Installation from the Front Four, M3 holes M3 Screw Host Device Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 3 Installation and connection 3.2 Antenna installation into a host device 3.2 Antenna installation into a host device 3.2.1 Screw holes M3 Screw 3.2.2 Guide TR3-A401 is recommended that you set up a guide on fixed-like the figure below. Host Device TR3-A401 Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 3 Installation and connection 3.3 Connection 3.3 Connection This product will connect with the antenna and antenna cables. This product connects with Host Device that direct connection or connect using our interface. 3.3.1 Attaching the Cable and Antenna Host Device TR3-C202-A0-8 Antenna Antenna Cable 3.3.2 Direct connection to the Host Device Interface Please prepare to the interface harness. Host Device TR3-C202-A0-8 Host Device Interface Manual No.TDR-MNL-C202-A0-8-EN-101 Interface harness TAKAYA RFID TR3 Series 3 Installation and connection 3.3 Connection 3.3.3 Using the interface board to connect to the Host Device Interface Interface board, please contact us. Host Device TR3-C202-A0-8 Interface harness Interface Cable Host Device Interface Interface board Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3-C202-A0-8 4 Specifications 4.1 TR3-C202-A0-8 ■ Specifications Specifications Item Applicable Japan Radio Law Standards FCC Radio Frequency Parameter ARIB STD-T82 FCC Part 15 Subpart C FCC ID : MK4TR3-C202-A0-8 RoHS EU RoHS(2002/95/EC) Supports Carrier frequency 13.56MHz ±50ppm(Ta=25℃) or less Transmit power or 10 to 100mW ± 20% power range (Transmit power range varies with input voltage.) Standards ISO/IEC 15693、ISO/IEC18000-3(Mode1) Tags Tag-it HF-I, my-d, I･CODE SLI, MB89R118(※1) Data rate Speed Data rate 1/4 26.48kbps Reader/Writer⇒Tag 1/256 1.65kbps 26.69kbps Tag⇒Reader/Writer Modulation Reader/Writer⇒Tag Tag⇒Reader/Writer Parameter ASK 10%(※2) / ASK 100% ASK, FSK Anti-collision Support ※1：Tag-it HF-I is a registered trademark of Texas Instruments Incorporated. my-d is a registered trademark of Infineon Technologies AG. I･CODE SLI is a registered trademark of NXP Semiconductors. MB89R118 is a registered trademark of FUJITSU Japan. ※2：initialization Manual No.TDR-MNL-C202-A0-8-EN-101 TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3-C202-A0-8 Specifications Item Controll Command Host Interface Connector LED1 CN1 Parameter Please refer to the TR3-C202 Protocol-Manual. UART(CMOS) Item Parameter Speed 9600bps 19200bps(※2) 38400bps Data bits Parity None Stop bit Flow control None 1pc (3 colors, red/green/orange) Connector : JST S10B-PH-SM4-TB(LF)(SN) Housing : JST PHR-10 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. CH1 to CH8 Symbol VCC VCC GND GND Rx Tx VCC2 IO1 IO2 10 IO3 Function Power Power GND GND Received data signal Transmitted data signal Power output Input/Output or Detection signal output H : Detection Input/Output or Trigger input L : Trigger ON Input/Output Connector : JST S2B-PH-SM4-TB(LF)(SN) Housing : JST PHR-2 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. Symbol RF GND Function Analog signal GND ※2：initialization Manual No.TDR-MNL-C202-A0-8-EN-101 10 TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3-C202-A0-8 Specifications Item Mechanical Dimensions data (W x D x H) Wight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range Accessories Other Manual No.TDR-MNL-C202-A0-8-EN-101 Parameter 103.6 x 103 x 23.3mm approx. 240g M3 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 55 degree ：+3.3± 10%, +5V ± 10% ：approx. 160mA(VDD=5.0V) ：approx. 60mA(VDD=5.0V) ：approx. 50mA(VDD=5.0V) ：max 1.0W(VDD=5.0V) 30 to 80%RH 0 to 55 degree 30 to 80%RH None 11 TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3-C202-A0-8 ■ Dimensions Unit：mm Tolerance：±1mm ( )is Recommended Dimension Manual No.TDR-MNL-C202-A0-8-EN-101 12 TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3-C202-A0-8 ■ Connections Names Antenna Cable Interface board Model Notes TR3-A202 TR3-A302 TR3-A401 TR3-AC-2A-*** *** puts the cable length. 0.5m ~ 3m cable are available. RS232C interface TCP/IP interface USB interface TR3-IF-1C TR3-IF-N1 TR3-IF-U1 ■ Electrical Characteristics(CN1、CN3) VDD=5.0V Item Condition H input voltage L input voltage H output voltage IOH=-5mA,-20mA L output voltage IOL=5mA,20mA Pull-up resistor MIN 2.5 3.0 25.0 TYP 50.0 MAX 5.0 1.0 2.0 100.0 Unit kΩ VDD=3.3V Item H input voltage L input voltage H output voltage L output voltage Pull-up resistor Condition IOH=-5mA,-20mA IOL=5mA,20mA MIN 1.815 3.0 25.0 TYP 50.0 MAX 3.3 0.66 2.0 100.0 Unit kΩ ・TX, RX, IO1, IO2 and IO3 is, Pull-up resistor has been connected. ・TX, RX, IO1, IO2 and IO3 is, 100 ohm resistor has been connected. Output port, LED is not driven. If the LED drive, please use the digital transistors. Manual No.TDR-MNL-C202-A0-8-EN-101 13 TAKAYA RFID TR3 Series 4 Specifications 4.2 Antenna 4.2 Antenna 4.2.1 TR3-A202 ■ Specifications Specifications Item Applicable RoHS Standards Antenna Resonant frequency Communication distance Connector CN1 Parameter EU RoHS(2002/95/EC) Support 13.56MHz ±40kHz(Ta=25℃) Max 10cm (Communication distance depends on the environment.) Connector : JST S2B-PH-SM4-TB(LF)(SN) Housing : JST PHR-2 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. Mechanical data Ambient Conditions Other Dimensions (W x D x H) Wight Installation Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range Accessories Symbol RF GND Function Analog signal GND 60 x 65 x 9.1 mm approx. 11g M3 Screw Screw is not included. 0 to 55 degree 30 to 80%RH 0 to 55 degree 30 to 80%RH RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit：mm Tolerance：±1mm Substrate thickness : 1.6mm Manual No.TDR-MNL-C202-A0-8-EN-101 14 TAKAYA RFID TR3 Series 4 Specifications 4.2 Antenna 4.2.2 TR3-A302 ■ Specifications Specifications Item Applicable RoHS Standards Antenna Resonant frequency Communication distance Connector CN1 Parameter EU RoHS(2002/95/EC) Support 13.56MHz ±40kHz(Ta=25℃) Max 7cm (Communication distance depends on the environment.) Connector : JST S2B-PH-SM4-TB(LF)(SN) Housing : JST PHR-2 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. Mechanical data Ambient Conditions Other Dimensions (W x D x H) Wight Installation Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range Accessories Symbol RF GND Function Analog signal GND 15 x 52.5 x 9.1 mm approx. 3g M3 Screw Screw is not included. 0 to 55 degree 30 to 80%RH 0 to 55 degree 30 to 80%RH RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit：mm Tolerance：±1mm Substrate thickness : 1.6mm Manual No.TDR-MNL-C202-A0-8-EN-101 15 TAKAYA RFID TR3 Series 4 Specifications 4.2 Antenna 4.2.3 TR3-A401 ■ Specifications Specifications Item Applicable RoHS Standards Antenna Resonant frequency Communication distance Connector CN1 Parameter EU RoHS(2002/95/EC) Support 13.56MHz ±40kHz(Ta=25℃) Max 5cm (Communication distance depends on the environment.) Connector : JST S2B-PH-K-S(LF)(SN) Housing : JST PHR-2 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. Mechanical data Ambient Conditions Other Dimensions (W x D x H) Wight Installation Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range Accessories Symbol RF GND Function Analog signal GND 15 x 30 x 9.1 mm approx. 2g M3 Screw Screw is not included. 0 to 55 degree 30 to 80%RH 0 to 55 degree 30 to 80%RH RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit：mm Tolerance：±1mm Substrate thickness : 1.0mm Manual No.TDR-MNL-C202-A0-8-EN-101 16 TAKAYA RFID TR3 Series 4 Specifications 4.3 Cable 4.3 Cable ■ Model Name TR3-AC-2A-*** Enter the cable length(Unit:m) 0.5M～3M ■ Specifications Item RoHS Linetype Connector Cable loss Parameter EU RoHS(2002/95/EC) Support Coaxial cable 1.5D-2V PH-PH 0.5M : approx. 0.043dB 3M : approx. 0.255dB ■ Dimensions (Cable length) ( )is Recommended Dimension Manual No.TDR-MNL-C202-A0-8-EN-101 17 TAKAYA RFID TR3 Series 5 Maintenance This product is mainly used in electronic components and semiconductors. Therefore, the long-term stable operation, the environment and conditions are expected to defect, as shown below. • Device degradation due to overvoltage and overcurrent. • Device degradation due to high temperature and long-term stress. • Poor contact of the connector and cause deterioration of insulation by moisture or dust. • Connector corrosion by corrosive gases. In order to use this product at its best, please conduct routine or periodic inspections. Item Maintenance Criteria Temperature Temperature Operating range 0 to 55 degree Humidity Humidity Operating range 30 to 80%RH Ambient Enclosure conditions Check the dusty None rating Corrosive Check the corrosion None Input Check the voltage Input Voltage : Power Voltage DC +3.3 ± 10%, +5V ± 10% Check the Voltage fluctuation fluctuation Check the Screw Product Checking and verifying Attachment Check the Connector Cable Check the Cable break None Performance Check the Performance Work Manual No.TDR-MNL-C202-A0-8-EN-101 18 TAKAYA RFID TR3 Series Revision History Revision code 1.00 1.01 Date 2010/4/16 2011/03/03 Revised contents Original production 3.1.2 Installation from the Front deleted. 4.1 TR3-C202-A0-8 Add to 3.3V input voltage. Manual No.TDR-MNL-C202-A0-8-EN-101 19 TAKAYA RFID TR3 Series [URL] [Mail] http://www.takaya.co.jp/ rfid@takaya.co.jp 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : bd451392-68b6-11e0-0000-4a943cba6fc6 Producer : PrimoPDF Modify Date : 2011:04:14 14:51:2809':0' Create Date : 2011:04:14 14:51:2809':0' Creator Tool : PrimoPDF http://www.primopdf.com/ Document ID : bd451392-68b6-11e0-0000-4a943cba6fc6 Format : application/pdf Title : Microsoft Word - TDR-MNL-C202-A0-8-EN-101.doc Creator : simazu_dai Page Count : 25 Author : simazu_daiEXIF Metadata provided by EXIF.tools