TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 13

TOSHIBA TEC Singapore Pte Ltd Dot Printer Users Manual 13

Users Manual 13

This appendix lists the accessories and options available for the printer. Contact your dealer for information on ordering any of these items. The installation of options allows you to expand the capabilities of your printer. Supplies Supplies Order Number Ribbon Cartridges Black ribbon TBD Print Head TBD Options Option Order Number Description TBD Installing the Ribbon Open print-gap lever fully open. To remove the old ribbon, squeeze both of the ribbon's tabs and lift the ribbon straight out of its carriage. Be careful of the print head during this operation. When placing the new ribbon cartridge on the carriage, make sure that the thin ribbon does not become bunched or folded at the print head. Readjust the print gap to achieve good print quality.
Supplies and Options A-2 To install the ribbon, see the section entitled “Installing the Ribbon Cartridge,” in the Installation Guide. Use the printing test function to check printing. See “Testing the Printer,” in the Installation Guide. Ribbon Cartridge Reorder No. MIP480-KA

Navigation menu