TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 13
TOSHIBA TEC Singapore Pte Ltd Dot Printer Users Manual 13
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
- 5. Users Manual 5
- 6. Users Manual 6
- 7. Users Manual 7
- 8. Users Manual 8
- 9. Users Manual 9
- 10. Users Manual 10
- 11. Users Manual 11
- 12. Users Manual 12
- 13. Users Manual 13
- 14. Users Manual 14
- 15. Users Manual 15
- 16. Users Manual 16
- 17. Users Manual 17
- 18. Users Manual 18
Users Manual 13
This appendix lists the accessories and options available for the printer. Contact your dealer for
information on ordering any of these items.
The installation of options allows you to expand the capabilities of your printer.
Supplies
Supplies Order Number
Ribbon Cartridges
Black ribbon TBD
Print Head TBD
Options
Option Order Number Description
TBD
Installing the Ribbon
Open print
-
gap
lever fully open. To
remove the old
ribbon, squeeze
both of the ribbon's
tabs and lift the
ribbon straight out
of its carriage.
Be careful of the
print head during
this operation.
When placing the new
ribbon cartridge on
the carriage, make
sure that the thin
ribbon does not
become bunched or
folded at the print
head.
Readjust the print gap
to achieve good print
quality.
Supplies and Options
A-2
To install the ribbon, see the section entitled “Installing the Ribbon Cartridge,” in the Installation
Guide.
Use the printing test function to check printing. See “Testing the Printer,” in the Installation Guide.
Ribbon Cartridge
Reorder No. MIP480-KA