TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 14
TOSHIBA TEC Singapore Pte Ltd Dot Printer Users Manual 14
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
- 5. Users Manual 5
- 6. Users Manual 6
- 7. Users Manual 7
- 8. Users Manual 8
- 9. Users Manual 9
- 10. Users Manual 10
- 11. Users Manual 11
- 12. Users Manual 12
- 13. Users Manual 13
- 14. Users Manual 14
- 15. Users Manual 15
- 16. Users Manual 16
- 17. Users Manual 17
- 18. Users Manual 18
Users Manual 14
![This appendix provides the physical, functional, and performance specifications for your mobile printer. It also contains detailed paper specifications. Physical Specifications Dimensions (vertical orientation) Height: 311 mm (12.25 in.) Width: 444.5 mm (17.5 in.) Depth: 166.6 mm (6.5 in.) Enclosure is injection molded plastic with hinged cover for access to paper loading, print head and ribbon replacement. Enclosure provides edge for paper to tear off. Color Night Sky Grey Weight Not to exceed 8.02 kg (17.7lbs) Power requirements Automotive, 12 VDC (10.5 – 18 VDC)) 110/220 VAC as option Power consumption Not to exceed 150 Watts Heat generation Average 65 kcal/h Interface and connectivity USB2.0 full speed, RS232 and Blue Tooth Class 2 ver1.2 (Standard) IEEE 802.11b (Option) Data buffer size 64K bytes Operating environment -4°F +140 º F (-20 ºC to + 60ºC) DC -4ºF to +113º F (-20ºC to + 45ºC)AC 10% - 85% Relative Humidity, no condensation Storage -22ºF + 158ºF (-30ºC to + 70ºC) 05% - 95% Relative Humidity, no condensation](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-1.png)
![Printer and Paper Specification B-2 Shock, Vibration, Acceleration Units may be vertically mounted using shock mounts to a bracket installed in a vehicle; operated horizontally while located on a passenger seat in a vehicle, or operated in office environments. Vibration resistance (as tested) Operating Acceleration 0.5G Frequency 5 to 55HZ Sweep Time 120 Sec/Cycle Non-Operating Acceleration 1.5G RMS Frequency 5 to 55HZ Sweep Time 120 Sec/Cycle Impact Resistance Operating 3G (print quality not guaranteed) Non-operating 10G Dust Proof, Corrosion Resistance Ingress Protection (IP) rating IP30. No special protection against fluids or immersion. Functional Specifications Print method Impact dot matrix with a 0.2 mm (0.009 in), 24-wire head Print direction Bidirectional logic-seeking Character cell Horizontal X vertical Letter (10 cpi): 36 X 24 dots Letter (12 cpi): 30 X 24 dots Draft:: 12 X 24 dots](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-2.png)
![Printer and Paper Specification B-3 Paper handling Single Forms: With the Paper Path Select Lever in the Single Sheet position, single sheets or forms may be used. The printer automatically senses that paper has been manually inserted. When paper is detected, the printer will advance the form to the first print line. Continuous forms: With the Paper Path Lever set to the Continuous Form position, continuous forms may be printed. Paper is loaded and adjusted via pushbuttons. Forms may be advanced to tear off feature by operator or by host. Continuous forms are parked while single sheets are used. Paper type 1-to 4-part side-glued or paper-stapled fanfolded continuous forms or single page top-glued forms. Paper size Continuous Width: 102–267 mm (4–10.5 in) Length: 102 mm (4 in) or greater Cut sheets Width: 102–267 mm (4–10.5 in) Length: 76–364 mm (3–14.3 in) Paper thickness Up to 0.35 mm (0.014 inch) Paper length By software Programmable in one line or inch increments By control panel 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (Letter), 11 2/3 (A4), 12, 14, or 15 inches (Default is 11 inches.) 1 to 126 lines Number of copies Up to 4, including the original Command sets Epson EP2 (emulations) IBM 2390+](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-3.png)
![Printer and Paper Specification B-4 Character sets Code Page 19 character sets CP 437 (USA) CP 437 (Greek) CP 850 (Multilingual) CP 851 (Greek) CP 852 (East Europe) CP 853 (Turkish) CP 855 (Cyrillic) CP 857 (Turkish) CP 858 (Multilingual) CP 860 (Portugal) CP 862 (Israel) CP 863 (Canada) CP 864 (Arabic) CP 865 (Norway) CP 866 (Cyrillic) CP 869 (Greek) CP 920 (Latin-5) CP 923 (Latin-9) USSR GOST EPSON National Character 15 character sets USA France Germany UK Denmark 1 Sweden Italy Spain 1 Japan Norway Denmark 2 Spain 2 Latin America Korea Legal Fonts Resident 13 fonts available Draft, Roman, Sans Serif, Courier, Bold, Prestige Elite, Script, Orator, Gothic, OCR A, OCR B, Roman T and Sans Serif H Line spacing 2, 3, 4, 6, 8, or 12 lines per inch. (1, 2, or 4 lines per centimeter). Character pitch 10, 12, 15, 17.1 or 20 characters per inch Characters per line 10 cpi: 80 cpl 12 cpi: 96 cpl 15 cpi: 120 cpl 17.1 cpi: 136 cpl 20 cpi: 160 cpl cpl = characters per line](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-4.png)
![Printer and Paper Specification B-5 Barcodes IBM: 9 Barcodes available UPC/A, UPC/E, EAN8, EAN13, CODE39, CODE128 CODABAR (NW7), INTERLEAVED 2 of 5, INDUSTRIAL 2 of 5 EPSON: 7 Barcodes available UPC/A, UPC/E, EAN8, EAN13, CODE39, CODE128 INDUSTRIAL 2 of 5 Performance Specifications Print speed 10 cpi 12 cpi Draft: 400 cps 480 cps Letter: 133 cps 160 cps cpi = characters per inch cps = characters per second Line feed speed 60 ms per line at 6 lines per inch Form feed speed 7 inches per second Pages per Hours ECMA 132 Letter Test Pattern Draft Quality 321 pph Letter Quality 172 pph Ribbon service life 2 million characters Printer Life 5 million lines or five years Print Head Life 400 million impacts MTBF 15,000 hours (50 hr/week power-on, 5% power on print duty cycle) MTTR 0.5 hours](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-5.png)
![Printer and Paper Specification B-6 Certification Safety: Regulation Country UL 1950-D3 (for 100-120 VAC) United States CSA C22.2/950 (for 100-120 VAC) Canada EN 60 950 (for 220-240 VAC) Germany RFI regulation: Regulation Country Class B of FCC Part 15B United States (for 100-120 VAC) CE mark (for 220-240 VAC) European Union](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-6.png)
![Printer and Paper Specification B-7 Paper Specifications Print Area Print Area for Continuous Forms Wc 102 to 267 mm (4 to 10.5 in) Lc 5.08 to 25.4 mm (0.2 to 1 in)](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-7.png)
![Printer and Paper Specification B-8 Print Area for Single Sheets Ws 102 to 267 mm (4 to 10.5 in) Hs 76 to 364 mm (3 to 14.3 in) Ls 5.08 to 32 mm (0.2 to 1.26 in)](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-8.png)
![Printer and Paper Specification B-9 Paper Thickness Paper thickness is given by the weight of the paper in either grams per square meter (g/m2) or in pounds per bond (lbs/bond). The following table shows the allowable paper thickness for one-part paper or for each sheet of multipart paper. The total thickness must not exceed 0.35 mm (0.014 inch). The weight of carbonless or carbon-backed paper may vary, depending on the paper manufacturer. When using paper of borderline thickness, test the paper before running a job. Type of Paper Number of Parts Thickness One-Part Carbonless Single 47-81 g/m2 (40-70 kg or 12-22 lb) Two-Part Carbonless Top 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Three-Part Carbonless Top 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Four-Part Carbonless Top 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) kg: Weight in kilograms of 1000 sheets of 788 X 1091 mm paper (1.16 g/m2) lb: Weight in pounds of 500 sheets of 17 X 22 inch paper (3.76 g/m2) Type of Paper Number of Parts Thickness Two-Part Carbon-Backed Top 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Three-Part Carbon-Backed Top 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Four-Part Carbon-Backed Top 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Carbon-backed Do not use in high humidity environments. Carbon-interleaved Avoid using single sheets format in carbon-interleaved.](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-9.png)
![Printer and Paper Specification B-10 Type of Paper Number of Parts Thickness Two-Part Carbon-Interleaved Top 40-64 g/m2 (34-55 kg or 11-17 lb) Carbon Counted as one sheet Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) Three-Part Carbon-Backed Top 40-64 g/m2 (34-55 kg or 11-17 lb) Carbon Counted as one sheet Middle 40-64 g/m2 (34-55 kg or 11-17 lb) Carbon Counted as one sheet Bottom 40-81 g/m2 (34-70 kg or 11-22 lb) kg: Weight in kilograms of 1000 sheets of 788 X 1091 mm paper (1.16 g/m2) lb: Weight in pounds of 500 sheets of 17 X 22 inch paper (3.76 g/m2)](https://usermanual.wiki/TOSHIBA-TEC-Singapore/S-0601.Users-Manual-14/User-Guide-650728-Page-10.png)