TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 14

TOSHIBA TEC Singapore Pte Ltd Dot Printer Users Manual 14

Users Manual 14

Download: TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 14
Mirror Download [FCC.gov]TOSHIBA TEC Singapore S-0601 Dot Printer User Manual 14
Document ID650728
Application IDRW2UU6hYTW7Ypz4db7u4mQ==
Document DescriptionUsers Manual 14
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.01kB (125150 bits)
Date Submitted2006-04-25 00:00:00
Date Available2006-04-20 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareGNU Ghostscript 7.06
Document Lastmod0000-00-00 00:00:00
Document TitleMicrosoft Word - Ch-B Printer & paper Specification MIP480 Rev 1_b.doc
Document CreatorPScript5.dll Version 5.2
Document Author: 2328

This appendix provides the physical, functional, and performance specifications for your
mobile printer. It also contains detailed paper specifications.
Physical Specifications
Dimensions (vertical orientation)
Height: 311 mm (12.25 in.)
Width: 444.5 mm (17.5 in.)
Depth: 166.6 mm (6.5 in.)
Enclosure is injection molded plastic with hinged cover for access to paper loading,
print head and ribbon replacement. Enclosure provides edge for paper to tear off.
Color
Night Sky Grey
Weight
Not to exceed 8.02 kg (17.7lbs)
Power requirements
Automotive, 12 VDC (10.5 – 18 VDC))
110/220 VAC as option
Power consumption
Not to exceed 150 Watts
Heat generation
Average 65 kcal/h
Interface and connectivity
USB2.0 full speed, RS232
and Blue Tooth Class 2 ver1.2 (Standard)
IEEE 802.11b (Option)
Data buffer size
64K bytes
Operating environment
-4°F +140 º F (-20 ºC to + 60ºC) DC
-4ºF to +113º F (-20ºC to + 45ºC)AC
10% - 85% Relative Humidity, no condensation
Storage
-22ºF + 158ºF (-30ºC to + 70ºC)
05% - 95% Relative Humidity, no condensation
Printer and Paper Specification
Shock, Vibration, Acceleration
Units may be vertically mounted using shock
mounts to a bracket installed in a vehicle;
operated horizontally while located on a
passenger seat in a vehicle, or operated in office
environments.
Vibration resistance (as tested)
Operating
Non-Operating
Impact Resistance
Acceleration
0.5G
Frequency
5 to 55HZ
Sweep Time
120 Sec/Cycle
Acceleration
1.5G RMS
Frequency
5 to 55HZ
Sweep Time
120 Sec/Cycle
Operating
3G (print quality not guaranteed)
Non-operating 10G
Dust Proof, Corrosion Resistance
Ingress Protection (IP) rating IP30. No special
protection against fluids or immersion.
Functional Specifications
Print method
Impact dot matrix with a 0.2 mm (0.009 in),
24-wire head
Print direction
Character cell
B-2
Bidirectional logic-seeking
Horizontal X vertical
Letter (10 cpi):
Letter (12 cpi):
Draft::
36 X 24 dots
30 X 24 dots
12 X 24 dots
Printer and Paper Specification
Paper handling
Single Forms:
Continuous forms:
Cut sheets
With the Paper Path Lever set to the Continuous Form
position, continuous forms may be printed.
Paper is loaded and adjusted via pushbuttons. Forms may
be advanced to tear off feature by operator or by host.
Continuous forms are parked while single sheets are used.
1-to 4-part side-glued or paper-stapled fanfolded continuous
forms or single page top-glued forms.
Paper type
Paper size
Continuous
With the Paper Path Select Lever in the Single Sheet
position, single sheets or forms may be used. The printer
automatically senses that paper has been manually
inserted. When paper is detected, the printer will advance
the form to the first print line.
Width:
Length:
Width:
Length:
Paper thickness
Paper length
By software
By control panel
102–267 mm (4–10.5 in)
102 mm (4 in) or greater
102–267 mm (4–10.5 in)
76–364 mm (3–14.3 in)
Up to 0.35 mm (0.014 inch)
Programmable in one line or inch increments
3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (Letter), 11 2/3 (A4), 12, 14, or
15 inches (Default is 11 inches.)
1 to 126 lines
Number of copies
Up to 4, including the original
Command sets
Epson EP2
(emulations)
IBM 2390+
B-3
Printer and Paper Specification
Character sets
Code Page
19 character sets
CP 437 (USA)
CP 437 (Greek)
CP 850 (Multilingual)
CP 851 (Greek)
CP 852 (East Europe)
CP 853 (Turkish)
CP 855 (Cyrillic)
CP 857 (Turkish)
CP 858 (Multilingual)
CP 860 (Portugal)
CP 862 (Israel)
CP 863 (Canada)
CP 864 (Arabic)
CP 865 (Norway)
CP 866 (Cyrillic)
CP 869 (Greek)
CP 920 (Latin-5)
CP 923 (Latin-9)
USSR GOST
EPSON National Character
15 character sets
USA
France
UK
Denmark 1
Italy
Spain 1
Norway
Denmark 2
Latin America
Korea
Fonts
Resident
13 fonts available
Draft, Roman, Sans Serif, Courier, Bold, Prestige Elite,
Script, Orator, Gothic, OCR A, OCR B, Roman T
and Sans Serif H
Line spacing
2, 3, 4, 6, 8, or 12 lines per inch.
(1, 2, or 4 lines per centimeter).
Character pitch
10, 12, 15, 17.1 or 20 characters per inch
Characters per line
B-4
Germany
Sweden
Japan
Spain 2
Legal
10 cpi:
12 cpi:
15 cpi:
17.1 cpi:
20 cpi:
80 cpl
96 cpl
120 cpl
136 cpl
160 cpl
cpl = characters per line
Printer and Paper Specification
Barcodes
IBM:
EPSON:
9 Barcodes available
UPC/A, UPC/E, EAN8, EAN13, CODE39, CODE128
CODABAR (NW7), INTERLEAVED 2 of 5,
INDUSTRIAL 2 of 5
7 Barcodes available
UPC/A, UPC/E, EAN8, EAN13, CODE39, CODE128
INDUSTRIAL 2 of 5
Performance Specifications
Print speed
Draft:
Letter:
10 cpi
12 cpi
400 cps 480 cps
133 cps 160 cps
cpi = characters per inch
cps = characters per second
Line feed speed
60 ms per line at 6 lines per inch
Form feed speed
7 inches per second
Pages per Hours
ECMA 132 Letter Test Pattern
Draft Quality
321 pph
Letter Quality
172 pph
Ribbon service life
2 million characters
Printer Life
5 million lines or five years
Print Head Life
400 million impacts
MTBF
15,000 hours (50 hr/week power-on, 5% power on print duty
cycle)
MTTR
0.5 hours
B-5
Printer and Paper Specification
Certification
B-6
Safety:
Regulation
UL 1950-D3 (for 100-120 VAC)
CSA C22.2/950 (for 100-120 VAC)
EN 60 950 (for 220-240 VAC)
Country
United States
Canada
Germany
RFI regulation:
Regulation
Class B of FCC Part 15B
(for 100-120 VAC)
CE mark (for 220-240 VAC)
Country
United States
European Union
Printer and Paper Specification
Paper Specifications
Print Area
Print Area for Continuous Forms
Wc
Lc
102 to 267 mm (4 to 10.5 in)
5.08 to 25.4 mm (0.2 to 1 in)
B-7
Printer and Paper Specification
Print Area for Single Sheets
Ws
Hs
Ls
B-8
102 to 267 mm (4 to 10.5 in)
76 to 364 mm (3 to 14.3 in)
5.08 to 32 mm (0.2 to 1.26 in)
Printer and Paper Specification
Paper Thickness
Paper thickness is given by the weight of the paper in either grams per square meter
(g/m2) or in pounds per bond (lbs/bond). The following table shows the allowable
paper thickness for one-part paper or for each sheet of multipart paper. The total
thickness must not exceed 0.35 mm (0.014 inch).
The weight of carbonless or carbon-backed paper may vary, depending on the paper
manufacturer. When using paper of borderline thickness, test the paper before
running a job.
Type of Paper
One-Part Carbonless
Two-Part Carbonless
Three-Part Carbonless
Four-Part Carbonless
Number of
Parts
Single
Top
Bottom
Top
Middle
Bottom
Top
Middle
Middle
Bottom
Thickness
47-81 g/m2 (40-70 kg or 12-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
kg: Weight in kilograms of 1000 sheets of 788 X 1091 mm paper (1.16 g/m2)
lb: Weight in pounds of 500 sheets of 17 X 22 inch paper (3.76 g/m2)
Type of Paper
Two-Part Carbon-Backed
Three-Part Carbon-Backed
Four-Part Carbon-Backed
Carbon-backed
Carbon-interleaved
Number of
Parts
Top
Bottom
Top
Middle
Bottom
Top
Middle
Middle
Bottom
Thickness
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
40-81 g/m2 (34-70 kg or 11-22 lb)
Do not use in high humidity environments.
Avoid using single sheets format in carbon-interleaved.
B-9
Printer and Paper Specification
Type of Paper
Two-Part CarbonInterleaved
Three-Part Carbon-Backed
Number of
Parts
Top
Thickness
40-64 g/m2 (34-55 kg or 11-17 lb)
Carbon
Bottom
Top
Carbon
Middle
Carbon
Bottom
Counted as one sheet
40-81 g/m2 (34-70 kg or 11-22 lb)
40-64 g/m2 (34-55 kg or 11-17 lb)
Counted as one sheet
40-64 g/m2 (34-55 kg or 11-17 lb)
Counted as one sheet
40-81 g/m2 (34-70 kg or 11-22 lb)
kg: Weight in kilograms of 1000 sheets of 788 X 1091 mm paper (1.16 g/m2)
lb: Weight in pounds of 500 sheets of 17 X 22 inch paper (3.76 g/m2)
B-10

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 10
Producer                        : GNU Ghostscript 7.06
Title                           : Microsoft Word - Ch-B Printer & paper Specification MIP480 Rev 1_b.doc
Creator                         : PScript5.dll Version 5.2
Create Date                     : 4/4/2006 14:19:11
Author                          : 2328
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QRTS-0601

Navigation menu