TRENDNET TEW654TR 802.11n Draft 2.0 Three Mode Wireless Pocket AP User Manual Manual Part 1

TRENDNET, INC. 802.11n Draft 2.0 Three Mode Wireless Pocket AP Manual Part 1

Contents

Manual Part 1

Wireless Travel Router2Wireless Travel Router2Table of ContentsCHAPTER 1: PRODUCT OVERVIEW1.1 Features ..............................................................................................................51.2 Package Contents ...............................................................................................61.3 Hardware Overview .............................................................................................71.3.1 LED Indicators ..........................................................................................71.3.2 Connectors ................................................................................................81.4 Travel Router Modes ...........................................................................................91.4.1 Switching Modes .......................................................................................101.5 Making Connections ............................................................................................111.5.1 Connecting the Power Adapter .................................................................111.5.2 Connecting the Dual Head USB Cable .....................................................111.5.3 Connecting the Ethernet Cable .................................................................121.6 System Requirements .........................................................................................121.6.1 Conguring Connections ...........................................................................12CHAPTER 2: AP MODE2.1 Installation ...........................................................................................................142.2 Web-Based Conguration ...................................................................................152.2.1 Wizard .......................................................................................................162.2.2 Setup .........................................................................................................18Wireless Network Settings ........................................................................18Local Area Network (LAN) Settings ..........................................................21Dynamic IP (DHCP) .................................................................................21Static IP ....................................................................................................21Wi-Fi Protected Setup (WPS) Settings .....................................................222.2.3 Advanced ..................................................................................................23Advanced Wireless Network Settings .......................................................23Access Control ..........................................................................................242.2.4 System ......................................................................................................25Admin ........................................................................................................25Settings .....................................................................................................25Firmware ...................................................................................................26Time ..........................................................................................................26
Wireless Travel Router 3Wireless Travel Router 32.2.5 Status ........................................................................................................27Device Info ................................................................................................27Logs ..........................................................................................................27Statistics ....................................................................................................27Wireless ....................................................................................................27CHAPTER 3: CLIENT MODE3.1 Installation ...........................................................................................................293.1.1 Infrastructure Mode ...................................................................................293.1.2 Ad-Hoc Mode ............................................................................................303.2 Web-Based Conguration ...................................................................................313.2.1 Wizard .......................................................................................................323.2.2 Setup .........................................................................................................34Wireless AP/ AP Client Settings ................................................................34Local Area Network (LAN) Settings ..........................................................39Dynamic IP (DHCP) ..................................................................................39Static IP .....................................................................................................39Wi-Fi Protected Setup (WPS) Settings .....................................................403.2.3 Advanced ..................................................................................................40Advanced Wireless Network Settings .......................................................403.2.4 System ......................................................................................................41Admin ........................................................................................................41Settings .....................................................................................................41Firmware ...................................................................................................42Time ..........................................................................................................423.2.5 Status ........................................................................................................43Device Info ................................................................................................43Logs ..........................................................................................................43Statistics ....................................................................................................43CHAPTER 4: ROUTER MODE4.1 Installation ...........................................................................................................454.2 Web-Based Conguration ...................................................................................464.2.1 Wizard .......................................................................................................474.2.2 Setup .........................................................................................................50Wireless Network Settings ........................................................................50
Wireless Travel Router4Wireless Travel Router4Local Area Network (LAN) Settings ..........................................................53Wide Area Network (WAN) Settings ..........................................................54Dynamic IP (DHCP) ..................................................................................54Static IP .....................................................................................................54PPPoE ......................................................................................................55PPTP .........................................................................................................56L2TP .........................................................................................................57Wi-Fi Protected Setup (WPS) Settings .....................................................58Dynamic DNS Settings .............................................................................594.2.3 Advanced ..................................................................................................60Access Control ..........................................................................................60IP Filter ......................................................................................................61Parental Control ........................................................................................62Virtual Server ............................................................................................63Special AP .................................................................................................64DMZ ..........................................................................................................65Firewall Settings ........................................................................................66Advanced Network Settings ......................................................................67Advanced Wireless Network Settings .......................................................684.2.4 System ......................................................................................................69Admin ........................................................................................................69Settings .....................................................................................................69Firmware ...................................................................................................70Time ..........................................................................................................70Ping Test ...................................................................................................714.2.5 Status ........................................................................................................71Device Info ................................................................................................71Statistics ....................................................................................................72Wireless ....................................................................................................72Logs ..........................................................................................................72Appendix A: Regulatory & Safety Information ...........................................................73Appendix B: Specications .......................................................................................77Appendix C: Limited Warranty ..................................................................................78
Wireless Travel Router 5Product Overview1Congratulations on your purchase of the 3-in-1 Travel Router. The Travel Router functions as an Access Point for wireless connections, an Access Point Client for wired devices to have wireless connections, and a Router to share resources such as computers, printers, les and other devices.This User Manual will guide you on how to install and set up the Travel Router. Read it carefully and keep it for future reference.1.1 Features3-in-1 Operation Mode: Supports AP, Router, and AP Client modesSmallest Networking DeviceFast Wireless Networking: Provides fast data rate connection up to 300Mbps for 802.11n devicesFull range compatibility: Compatible with IEEE 802.11n, 802.11g, 802.11b and 802.3u devicesLow Power Consumption: Consumes less than 2.5 wattsUSB Bus Powered: Provides better mobility.Quick and Easy Setup with Web-based Management UtilityStrong Network Security - Supports the following features:••••••••WPA, WPA-PSK, WPA2, and WPA2-PSK security standarsWPS button for Wi-Fi WPS congurationPPPoE/PPTP/L2TP protocol for DSL connectionsFirewall protection→→→→
Wireless Travel Router6Wireless Travel Router61. PRODUCT OVERVIEW1.2 Package ContentsCheck if your package comes with the following items. If any of them is missing or appears damaged, please contact your retailer.Travel Router PouchPower Adapter Ethernet CableDual Head USB Cable CD-ROM
Wireless Travel Router 7Wireless Travel Router 71. PRODUCT OVERVIEWPOWER WLANLANPower LEDLights when the power is connected.WLAN / WPS LEDFlashes to indicate activity. GREEN Blinks when a wireless device is connected.Blinks when data transfer is in progress.AMBER Blinks when WPS is enabled.•••LAN / WAN LEDGREEN (solid)Lights when LAN/WAN port is connected to a DSL or cable modem successfully.GREEN (blinks)Blinks when transmitting or receiving data through the LAN / WAN connection.••1.3 Hardware Overview1.3.1 LED Indicators
Wireless Travel Router8Wireless Travel Router81. PRODUCT OVERVIEW1.3.2 ConnectorsNote:A wireless network normally requires a network name (SSID) and WPA security key to prevent unwanted access to the network. This process requires users to have knowledge of WiFi devices and their congurations. But with WPS enabled, the network name (SSID) and WPA security key of the devices are automatically congured.WPS ButtonPress to enable Wi-Fi Protected Setup.LAN / WAN PortConnect to a wired network or a DSL modem, a computer, or other device such as a switch or a hub using the Ethernet cable.Reset ButtonPress and hold for 5 seconds to reboot the device and restore the factory default settings.Power PortConnect the power adapter or the USB cable to this port.
Wireless Travel Router 9Wireless Travel Router 91. PRODUCT OVERVIEW1.4 Travel Router ModesBefore using the travel router, determine the type of mode you want to use:Access Point (AP) ModeWith AP mode, you can use the travel router as an access point for wireless clients to connect to the local area network (LAN) and to other wireless clients.•Client ModeSwitch to this AP-Client mode to connect a device to the travel router using an RJ-45 cable and use the travel router as a wireless adapter. This mode enables the Ethernet-connected device to have wireless function over a network.•InternetADSL /Cable ModemWLAN AP /RouterWireless StationPrinterGame ConsoleInternetDSL /Cable ModemWireless StationMobile PDAWireless StationBroadbandRouter
Wireless Travel Router10 Wireless Travel Router101. PRODUCT OVERVIEWNote:Make sure to unplug the power source from the power port rst before switching modes.AP RTClientMode SwitchAdjust the switch to change modes:APClientRouter1 Unplug the power source (power adapter or USB cable) if it is connected.2 Adjust the switch to desired mode.3 Re-connect the power source to the power port.1.4.1 Switching ModesUse the mode switch at the bottom of the travel router to change modes.Router ModeUse this mode to connect the travel router to a DSL or cable modem. With this mode, wireless clients connect to the Internet through the travel router using one account and one IP address.•InternetADSL /Cable ModemWireless StationMobile PDA
Wireless Travel Router 11Wireless Travel Router 111. PRODUCT OVERVIEW1.5 Making Connections1.5.1 Connecting the Power AdapterUse the power adapter to directly connect to a power outlet.1 Connect the power adapter to the power port of the travel router.2 Plug the power adapter to an outlet or power strip.1.5.2 Connecting the Dual Head USB Cable1 Connect the two heads of the USB cable to your computer.2 Plug the other end to the power port of the travel router.Some computers have over-current protection capability. This means that when the current of a USB port goes over 500mA, the connected device will not be accessed by the computer. To avoid this risk, use the dual head USB cable supplied with your travel router.To connect, follow the steps below:Note:Make sure you connect the dual head USB cable to the computer rst before connecting the travel router.
Wireless Travel Router12Wireless Travel Router121. PRODUCT OVERVIEWUse the Ethernet (RJ-45) cable to connect to a computer for wired connection or connect to a DSL or cable modem for internet connection.1 Connect one end of the Ethernet cable to your computer or a DSL or cable modem.2 Plug the other end to the LAN port of the travel router.1.5.3 Connecting the Ethernet CableCable modem connection Wired computer connection1.6 System RequirementsOperating systems: Windows XP, VistaMicrosoft Internet Explorer 5.5 or higherAt least one RJ-45 Ethernet network•••1.6.1 Conguring ConnectionsTo properly detect the connections, congure your computer’s network settings rst. The following instructions are based on Windows XP. Non-Windows XP users will see similar screens. 1 For Windows XP, click Start > Control Panel > Network Connections. Right click on a connection, then select Properties.2 Highlight Internet Protocol (TCP/IP), then click Properties.3 Click Obtain an IP address automatically and Obtain DNS server address automatically.4 Click OK and OK again.
Wireless Travel Router 13AP Mode2Before You BeginWith AP mode, you can use the travel router as an access point of your wireless device. ChecklistA valid network or Internet connection.A DSL / cable modem provided by the ISP as part of the broadband connection installation.A broadband router that connects to the DSL / cable modem for internet connection sharing.√√√You need to connect...Connect the travel router to your router or network that has a DHCP server. The travel router will obtain an IP address from the network automatically.Connect the LAN port of the travel router to the LAN port on your network then plug in the power adapter.Use wireless adapters to connect to the ravel router (default SSID TRENDnet654).•••
Wireless Travel Router14 Wireless Travel Router142. AP MODE2.1 InstallationInternetDSL /Cable ModemWireless StationMobile PDAWireless StationBroadbandRouterNetwork DiagramThe following LED indicators should be lit...Power LED (solid)LAN LED (solid)√√1 Adjust the switch to AP mode. 2 Connect one end of the RJ-45 cable to the travel router and the other end to the DSL or cable modem.3 Turn on or plug in the DSL / cable modem and the broadband router.4 Connect the power adapter to the travel router and plug to an outlet or power strip. Wait for the travel router to boot.5 Check the LED indicators to verify connection.6 Enable the wireless function of the wireless clients or devices.Note:Make sure you remove the power source from the travel router rst before adjusting the mode switch.
Wireless Travel Router 15Wireless Travel Router 152. AP MODE2.2 Web-Based CongurationAfter making all the required connections, congure the travel router using the web-based conguration utility.How to Access the Conguration Utility1 Open a web-browser and enter the default address: http://tew-654tr/.2 Enter the default User Name and Password: admin.Notes:You can also access the web-based conguration by any of the following ways:1. If your LAN connection uses DHCP, the travel router can obtain an IP address from the DHCP server. You can either enter that IP address or the default address http://tew-654tr/ on the browser’s address eld to open the web-based conguration utility.2. If your LAN connection uses Static IP, You can either enter http://tew-654tr/ or that static IP address on the browser’s address eld. The default IP address is 192.168.10.1.If you cannot access the conguration utility:Disable the Internet security software on the computer. The rewall may block access to the conguration page. Check the software rewall documentation for help.•
Wireless Travel Router16 Wireless Travel Router162. AP MODE2.2.1 WizardClick the Wizard button to congure the travel router using the setup wizard.1 Click Next to continue.2 Create a new Password, then click Next to continue.3 Create a new Wireless Network Name and select the Channel (6 by default). Click Next to continue.After login, the Status > Device Info page is displayed. Note:For novice users, it is recommended to use the Setup Wizard to congure the travel router.To access a page, click the buttons on the right. To logout, click Logout.
Wireless Travel Router 17Wireless Travel Router 172. AP MODE5 The wireless security setting is displayed. Take note of the information then click Save. The information shown varies depending on the selected security level.6 Click Restart to reboot the access point and the device. If you select Better... Enter the Passphrase, then click Next to continue. Skip to step 5. If you select Good... Select the Key Format and Key Length. Enter the WEP Key, then click Next to continue.4 Select the type of security, then click Next to continue. If you select None, skip to step 5. If you select Best... Enter the Passphrase, then click Next to continue. Skip to step 5.Note:The Passphrase must be 8-63 ASCII characters or 64 hexadecimal characters.
Wireless Travel Router18 Wireless Travel Router182. AP MODE2.2.2 SetupThe Setup menu allows you to congure basic router settings. Click the Setup button then the submenu to view page.Wireless Network SettingsEnable WirelessCheck the box to enable wireless function. Uncheck to disable it.Wireless Network NameThe name of your wireless network, also called Service Set Identier (SSID).Enter up to 32 characters.Enable Auto Channel ScanAuto channel scan selects the channel with the least amount of interference. Check to enable auto channel scan. Wireless ChannelManually select the channel from the list. By default, the channel is set to 6. If Enable Auto Channel Scan is checked, this box is grayed out.802.11 ModeLimit the type of wireless clients to allow connection with. Select any of the following modes if your clients are: 2.4Ghz 802.11b/g mixed mode: a mix of 802.11b and 11g wireless devices.2.4Ghz 802.11b/g/n mixed mode: a mix of 802.11b, 11g, 11n wireless devices.2.4Ghz 802.11n only mode: all 802.11n wireless devices.Channel WidthSelect the appropriate channel width:20 MHz (Default): Select if your wireless clients are not 802.11n.Auto 20/40 MHz: Select if your wireless clients are a mix of 802.11b, 11g, 11n wireless clients. If you are not sure which wireless clients you are using, select Auto.Enable Hidden WirelessCheck to hide the SSID of your wireless network to be broadcasted when wireless clients scan for wireless networks. To display the router’s SSID, keep the box unchecked (default).WMM EnableWi-Fi Multimedia (WMM) improves the quality of video and voice applications •••••
Wireless Travel Router 19Wireless Travel Router 192. AP MODEtransmitted over a wireless network. This function is commonly used with multimedia applications such as a game console. Check the box to enable WMM.Wireless Security ModeSelect the security level for your wireless network. Select the wireless security mode from the list:Disable Wireless Security: (Default) Select if you do not want to use any wireless security.Enable WEP Wireless Security (basic)Enable WPA Wireless Security (enhanced)Enable WPA-2 Wireless Security (enhanced)Enable WPA-Auto Wireless Security (enhanced): Select if you are unsure which WPA wireless security to use.The required settings vary depending on the selected mode. •••••WEPWEP (Wired Equivalent Privacy) is the basic encryption method. With WEP encryption, all wireless clients must enter the same key to connect to the access point.AuthenticationSelect the type of authentication:Open system: Allows public access to the travel router via wireless communications.Shared Key: Requires users to enter the same WEP key to exchange data with other wireless devices.Auto: Select Auto if you are •••unsure which authentication suits best for your wireless clients.Key LengthSelect the key length or the level of encryption:64Bit: Select to enter 10 hexadecimal characters with any combination of 0-9 or A-F128Bit: Select to enter 26 hexadecimal characters with any combination of 0-9 or A-FKey FormatSelect the key format:ASCII: Select to enter ASCII characters.HEX: Select to enter hexadecimal characters.Default WEP KeyThe travel router supports up to 4 sets of WEP keys. Select which WEP Key is used as the default key from the list.••••
Wireless Travel Router20 Wireless Travel Router202. AP MODEWPA / WPA-2 / WPA-AutoWPA (Wi-Fi Protected Access) uses high grade encryption and authentication which is designed to improve WEP encryption. WPA / WPA-2 / WPA-Auto uses a passphrase to authenticate wireless connections.Cipher TypeSelect the encryption method:TKIP: Temporal Key Integrity Protocol.AES: Advanced Encyption Standard.••WEP KEY 1-4Manually enter a set of WEP key for each box. Select the default WEP key from the Default WEP Key list.Auto: Select Auto if you are unsure which method is suitable for your wireless clients.PSK/EAPSelect the authentication method:PSK: Select to use a passphrase for authentication. ••Passphrase Create a passphrase. The passphrase must be 64 hexadecimal or 8-63 ASCII characters.Conrm PassphraseRe-enter passphrase.EAP: Select to use Extensible Authentication Protocol (EAP). This should only be used when a Radius server is connected to the travel router. You can have up to 2 Radius server settings.•IPEnter the IP address of the Radius server. PortEnter the port number of the Radius server. The default value is 1812.Shared SecretEnter the secret key shared between the travel router and the Radius server.Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.
Wireless Travel Router 21Wireless Travel Router 212. AP MODEDynamic IP (DHCP)My LAN Connection isSelect Dynamic IP (DHCP) to obtain the IP address information automatically from your ISP. The IP Address, Subnet Mask, and Gateway Address are shown on the page.Device NameDisplays the default device name.Static IPMy LAN Connection isSelect Static IP if you are required to use a permanent IP address to connect to the Internet. You need to manually enter the information provided by your ISP. IP AddressEnter the IP address provided by your ISP.Subnet MaskEnter the subnet mask provided by your ISP.Gateway AddressEnter the gateway address provided by you ISP.Primary / Secondary DNS ServerEnter the DNS server addresses provided by your ISP.Enable DHCP ServerCheck the box to use the travel router as a DHCP server for your network. A DHCP server automatically assigns an IP address to each client on your network. This function is disabled by default.DHCP IP Address RangeEnter the starting and ending range of IP addresses that can be assigned to clients on your network.DHCP Lease TimeSelect the length of time to “lease” the dynamic IP address from the list. The default time is 1 Week.Local Area Network (LAN) Settings
Wireless Travel Router22 Wireless Travel Router222. AP MODEDomain NameEnter the domain name (optional).Dynamic DHCP Client List windowDisplays the list of DHCP clients.EnableCheck the box to enable WPS function.StatusDisplays WPS status: UnCongured or Congured.Wi-Fi Protected Setup (WPS) SettingsWi-Fi Protected Setup (WPS) is an optional certication program from the Wi-Fi Alliance that is designed to ease the task of setting up and conguring security on a wireless network. Push Button: If the client device has a WPS button.PIN Number: If the client device has a WPS PIN number.Self-PIN NumberDisplays the default PIN number of the travel router.Client PIN NumberEnter the client’s PIN number. This PIN number will be used to communicate with the travel router to connect to the network.Start PINClick this button to start WPS conguration process if the client device has a WPS PIN number.Push Button CongurationClick the Start PBC button to start WPS conguration process if the client device has a WPS button.••There are 2 methods used in WPS conguration:Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.
Wireless Travel Router 23Wireless Travel Router 232. AP MODE2.2.3 AdvancedThe Advanced menu congurations greatly affect the operating performance of the travel router. This menu is intended for advanced users. It is recommended to retain the default settings. Do not change any of congurations if you are unsure about it.Advanced Wireless Network SettingsBeacon PeriodEnter the interval period of time for the access point to send out beacons to synchronize the wireless network. The default value is 100 milliseconds. RTS ThresholdThe default and the recommended value is 2346. Should you encounter inconsistent data ow, only minor adjustments should be made.Fragmentation ThresholdFragmentation threshold refers to the amount of packets that will be fragmented before transmission. The default and recommended value is 2346 bytes.DTIM IntervalThis value indicates the interval of Delivery Trafc Indication Message (DTIM). A DTIM is a countdown eld informing clients of the next window for listening to broadcast and multicast messages. The default value is 1.Preamble TypePreamble is use to limit the packets of data for transmission. When the connection is bad, it is recommended to use the Short Preamble.Enable IGMP SnoopingCheck the box to enable Internet Group Management Protocol (IGMP) snooping. This function restrains multicast trafc in a switched network.Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.
Wireless Travel Router24 Wireless Travel Router242. AP MODEAccess ControlThe Access Control menu allows you deny or only allow access to certain wireless clients by ltering their MAC addresses.Access ControlSelect the type of access from the list:Disable: Disable access control.Reject: Deny the MAC addresses shown on the list to access the wireless network.Accept: Only allow the MAC addresses shown on the list to access to wireless network.MAC Address•••1 Select the client from the Connected PCs list, then click Clone. The cloned MAC address is displayed in the MAC Address eld.2 Click Apply to add MAC address in the MAC Filter List. The system will reboot.Displays the cloned MAC address. To clear the MAC address, click Clear.Connected PCsSelect the name of the connected client that you want to clone. Click Clone to clone its MAC address.To grant or block access:3 After rebooting, select the Access Control option: Disable, Reject or Accept.4 Click Apply to save setting. The system will reboot for changes to take effect.5 To add more MAC addresses, repeat steps 1-4.To edit the access control of a MAC address, click its corresponding icon.To delete the MAC address from the list, click its corresponding icon.
Wireless Travel Router 25Wireless Travel Router 252. AP MODE2.2.4 SystemThe System menu provides password conguration, backup and restore settings, rmware update and date and time settings.AdminThe Admin submenu allows you to change the default user name and password which are use to login.New User NameEnter the new user name here.New / Conrm PasswordEnter the password.Click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.SettingsThe Settings submenu provides backup and restore setting functions.Save Settings to Local Hard DriveUse this function to save the current conguration settings to your local hard drive. Click Save, then select the folder where you want to save the le.Load Settings From Local Hard DriveUse this function to retrieve saved conguration settings from the local hard drive. 1 Click Browse to locate the le. 2 Click Upload Settings to transfer and apply the settings to the travel router.Restore to Factory Default SettingsClick Restore Device to restore all congurations to the factory default settings. All changes in conguration will be deleted.Restart DeviceClick Restart to reboot the travel router.
Wireless Travel Router26 Wireless Travel Router262. AP MODEFirmwareThe Firmware submenu allows you to upgrade the rmware to the latest version.Current Firmware VersionDisplays the current rmware version.Firmware DateDisplays the date when the rmware was last updated.TimeThe Time submenu allows you to manually adjust the system time settings or synchronize it with a server.Current TimeDisplays the current date and time settings.Time ZoneSelect the time zone in your area.Synchronize the clock withSelect: Manual: To manually adjust the date and time.Automatic: To synchronize date and time with the server.••Default NTP ServerEnter the NTP server address to synchronize the date and time with.Set the TimeUse this option to manually set the date and time. This option is only available when Synchronize the clock with is set to Automatic.Enable Daylight SavingCheck the box to enable daylight saving time. Use the Start and End eld boxes to specify the starting and ending dates.Click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect. 1 Download the latest rmware from the manufacturer’s website, and save it to a disk. 2 Click Browse to locate the le. 3 Click Apply to start rmware update. The system will reboot to complete update.
Wireless Travel Router 27Wireless Travel Router 272. AP MODE2.2.5 StatusThe Status menu displays device, logs, trafc, and connection information.LogsThis page displays the recorded events that occur within the wireless network.Click the following buttons to view the First Page, Last Page, Previous Page, and Next Page.To delete log data, click Clear Log.To change log settings, click Log Settings.To refresh list, click Refresh.StatisticsThis page displays the trafc statistics of received and transmitted packets that passed through the travel router.Click Refresh to refresh table.WirelessThis page displays the information of connected wireless clients such as the time of connection and their MAC addresses.Device InfoThis page displays the Firmware Version, LAN and Wireless LAN information.
Wireless Travel Router283Client ModeBefore You BeginWith Client mode, you can transform Ethernet-enabled devices to have wireless function using the travel router.ChecklistA valid network or Internet connection.A DSL / cable modem provided by the ISP as part of the broadband connection installation.A broadband router that connects to the DSL / cable modem for internet connection sharing.√√√You need to connect...Connect the travel router to your router or network that has a DHCP server. The travel router will obtain an IP address from the network automatically.Connect the LAN port of the travel router to the LAN port on your network then plug in the power adapter.Use wireless adapters to connect to the ravel router (default SSID TRENDnet654).•••
Wireless Travel Router 29Wireless Travel Router 293. CLIENT MODE3.1 InstallationInternetADSL /Cable ModemWLAN AP /RouterWireless StationPrinterGame ConsoleNetwork DiagramThe following LED indicators should be lit...Power LED (solid)LAN LED (solid)WLAN LED (ashing green)√√√1 Adjust the switch to Client mode.2 Connect one end of the RJ-45 cable to the travel router and the other end to the LAN port of the computer or other device.3 Turn on or plug in the DSL / cable modem and the wireless router.4 Connect the power adapter to the travel router and plug to an outlet or power strip. Wait for the travel router to boot.5 Check the LED indicators to verify connection.3.1.1 Infrastructure ModeWith infrastructure mode, all clients connect to a central access point (AP), all data pass through this access point.
Wireless Travel Router30 Wireless Travel Router303. CLIENT MODE3.1.2 Ad-Hoc ModeAd-Hoc is a client setting that provides independent peer-to-peer connectivity in a wireless LAN. With this mode, devices communicate directly with each other. A good example is the communication between two game consoles. See diagram below.1 Adjust the switch to Client mode. 2 Connect one end of the RJ-45 cable to the travel router and the other end to the game console or other devices.3 Connect the power adapter to the travel router and plug to an outlet or power strip. Wait for the travel router to boot.Network DiagramGame ConsoleGame ConsoleThe following LED indicators should be lit...Power LED (solid)LAN LED (solid)WLAN LED (ashing green)√√√
Wireless Travel Router 31Wireless Travel Router 313. CLIENT MODE3.2 Web-Based CongurationAfter making all the required connections, congure the travel router using the web-based conguration utility.How to Access the Conguration Utility1 Open a web-browser and enter default address: http://client-654tr/.2 Enter the default User Name and Password: admin.Notes:You can also access the web-based conguration by any of the following ways:1. If your LAN connection uses DHCP, the travel router can obtain an IP address from the DHCP server. You can either enter that IP address or the default address http://client-654tr/ on the browser’s address eld to open the web-based conguration utility.2. If your LAN connection uses Static IP, You can either enter http://client-654tr/ or that static IP address on the browser’s address eld. The default IP address is 192.168.10.1.If you cannot access the conguration utility:Disable the Internet security software on the computer. The rewall may block access to the conguration page. Check the software rewall documentation for help.•
Wireless Travel Router32 Wireless Travel Router323. CLIENT MODE3.2.1 WizardClick the Wizard button to congure the travel router using the setup wizard.1 Click Next to continue.2 Create a new Password, then click Next to continue.3 Create a new Wireless Network Name and select the Channel (6 by default). Click Next to continue.After login, the Status > Device Info page is displayed. Note:For novice users, it is recommended to use the Setup Wizard to congure the travel router.To access a page, click the buttons on the right. To logout, click Logout.
Wireless Travel Router 33Wireless Travel Router 333. CLIENT MODE5 The wireless security setting is displayed. Take note of the information then click Save. The information shown varies depending on the selected security level.6 Click Restart to reboot the access point and the device. If you select Better... Enter the Passphrase, then click Next to continue. Skip to step 5. If you select Good... Select the Key Format and Key Length. Enter the WEP Key, then click Next to continue.4 Select the type of security, then click Next to continue. If you select None, skip to step 5. If you select Best... Enter the Passphrase, then click Next to continue. Skip to step 5.Note:The Passphrase must be 8-63 ASCII characters or 64 hexadecimal characters.
Wireless Travel Router34 Wireless Travel Router343. CLIENT MODE3.2.2 SetupThe Setup menu allows you to congure basic router settings. Click the Setup button then the submenu to view page.Wireless AP/ AP Client SettingsEnable Access PointClick this button to access Wireless Network Settings page. See page 36.Site SurveyClick this button to scan for available networks. Available networks are listed on the table. To select a network, click on the network’s radio button.Wireless Network NameDisplays the name of the selected wireless network, also called Service Set Identier (SSID).Wireless ChannelDisplays the wireless channel of the selected network.Wireless Security ModeDisplays the security mode of the selected network.Disable Wireless Security: No wireless security is set.Enable WEP Wireless Security (basic)Enable WPA Wireless Security (enhanced)Enable WPA-2 Wireless Security (enhanced)The required settings vary depending on the wireless security mode. ••••WEPWEP (Wired Equivalent Privacy) is the basic encryption method. With WEP encryption, all wireless clients must enter the same key to connect to the access point.AuthenticationSelect the type of authentication:Open system: Allows public access to the travel router via wireless communications.Shared Key: Requires users to enter the same WEP key to exchange data with other wireless devices.••
Wireless Travel Router 35Wireless Travel Router 353. CLIENT MODEWPA / WPA-2Cipher TypeSelect the encryption method:TKIP: Temporal Key Integrity Protocol.AES: Advanced Encyption Standard.••PassphraseEnter the required passphrase to connect to the selected network. The passphrase must be 64 hexadecimal or 8-63 ASCII characters.Conrm PassphraseRe-enter passphrase.Click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.Auto: Select Auto if you are unsure.Key LengthSelect the key length or the level of encryption:64Bit: Select to enter 10 hexadecimal characters with any combination of 0-9 or A-F128Bit: Select to enter 26 hexadecimal characters with any combination of 0-9 or A-FKey FormatSelect the key format:ASCII: Select to enter ASCII characters.HEX: Select to enter hexadecimal characters.Default WEP KeySelect which WEP Key is used as the default key from the list.WEP KEY 1-4Manually enter a set of WEP key for each box. Select the default WEP key from the Default WEP Key list.•••••
Wireless Travel Router36 Wireless Travel Router363. CLIENT MODEclient at the same time.Enable Access PointCheck the box to enable access point function. Uncheck to disable it.Wireless Network NameThe name of your wireless network, also called Service Set Identier (SSID). Enter up to 32 characters.Enable Auto Channel ScanAuto channel scan selects the channel with the least amount of interference. Check to enable auto channel scan. Wireless ChannelManually select the channel from the list. By default, the channel is set to 6. If Enable Auto Channel Scan is checked, this box is grayed out.802.11 ModeLimit the type of wireless clients to allow connection with. Select any of the following modes if your clients are: 2.4Ghz 802.11b/g mixed mode: a mix of 802.11b and 11g wireless devices.2.4Ghz 802.11b/g/n mixed mode: a mix of 802.11b, 11g, 11n wireless devices.2.4Ghz 802.11n only mode: all 802.11n wireless devices.Channel WidthSelect the appropriate channel width:20 MHz (Default): Select if your wireless clients are not 802.11n.Auto 20/40 MHz: Select if your wireless clients are a mix of 802.11b, 11g, 11n wireless clients. If you are not sure which wireless clients you are using, select Auto.Enable Hidden WirelessCheck to hide the SSID of your wireless network to be broadcasted when wireless clients scan for wireless networks. To display the router’s SSID, keep the box unchecked (default).WMM EnableWi-Fi Multimedia (WMM) improves the quality of video and voice applications transmitted over a wireless network. This function is commonly used with multimedia applications such as a game console. Check the box to enable WMM.Enable WISP ModeCheck the box to enable Wireless Internet Service Provider (WISP). WISP is commonly used in wireless hotspots, such as coffee shops, airports. etc. When the travel router is connected to a wireless hotspot, it connects with a WISP account •••••Wireless Network SettingsUse this page to enable and setup the travel router as an access point and wireless
Wireless Travel Router 37Wireless Travel Router 373. CLIENT MODEand is assigned a public IP address. This account and public IP address are then shared and used by all connected clients. The connected clients receive private IP addresses from the travel router. If WISP is disabled, the travel router does not share the WISP account, instead, connected clients must connect to the wireless network directly.Wireless Security ModeSelect the security level for your wireless network. Select the wireless security mode from the list:Disable Wireless Security: (Default) Select if you do not want to use any wireless security.Enable WEP Wireless Security (basic)Enable WPA Wireless Security (enhanced)Enable WPA-2 Wireless Security (enhanced)Enable WPA-Auto Wireless Security (enhanced): Select if you are unsure which WPA wireless security to use.The required settings vary depending on the selected mode. WEPWEP (Wired Equivalent Privacy) is the basic encryption method. With WEP encryption, all wireless clients must enter the same key to connect to the access point.•••••AuthenticationSelect the type of authentication:Open system: Allows public access to the travel router via wireless communications.Shared Key: Requires users to enter the same WEP key to exchange data with other wireless devices.Auto: Select Auto if you are •••unsure which authentication suits best for your wireless clients.Key LengthSelect the key length or the level of encryption:64Bit: Select to enter 10 hexadecimal characters with any combination of 0-9 or A-F128Bit: Select to enter 26 hexadecimal characters with any combination of 0-9 or A-FKey FormatSelect the key format:ASCII: Select to enter ASCII characters.HEX: Select to enter hexadecimal characters.Default WEP KeyThe travel router supports up to 4 sets of WEP keys. Select which WEP Key is used as the default key from the list.••••
Wireless Travel Router38 Wireless Travel Router383. CLIENT MODEWEP KEY 1-4Manually enter a set of WEP key for each box. Select the default WEP key from the Default WEP Key list.WPA / WPA-2 / WPA-AutoWPA (Wi-Fi Protected Access) uses high grade encryption and authentication which is designed to improve WEP encryption. WPA / WPA-2 / WPA-Auto uses a passphrase to authenticate wireless connections.Cipher TypeSelect the encryption method:TKIP: Temporal Key Integrity Protocol.AES: Advanced Encyption Standard.••Auto: Select Auto if you are unsure which method is suitable for your wireless clients.PSK/EAPSelect the authentication method:PSK: Select to use a passphrase for authentication. ••EAP: Select to use Extensible Authentication Protocol (EAP). This should only be used when a Radius server is connected to the travel router. You can have up to 2 Radius server settings.•IPEnter the IP address of the Radius server. PortEnter the port number of the Radius server. The default value is 1812.Shared SecretEnter the secret key shared between the travel router and the Radius server.Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.Passphrase Create a passphrase. The passphrase must be 64 hexadecimal or 8-63 ASCII characters.Conrm PassphraseRe-enter passphrase.
Wireless Travel Router 39Wireless Travel Router 393. CLIENT MODEDynamic IP (DHCP)My LAN Connection isSelect Dynamic IP (DHCP) to obtain the IP Address information automatically from your ISP. The IP Address, Subnet Mask, and Gateway Address are shown on the page.Device NameDisplays the default device name.Static IPMy LAN Connection isSelect Static IP if you are required to use a permanent IP Address to connect to the Internet. You need to manually enter the information provided by your ISP. IP AddressEnter the IP address provided by your ISP.Subnet MaskEnter the subnet mask provided by your ISP.Gateway AddressEnter the gateway address provided by you ISP.Primary / Secondary DNS ServerEnter the DNS server addresses provided by your ISP.Local Area Network (LAN) SettingsOnce conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.
Wireless Travel Router40 Wireless Travel Router403. CLIENT MODEWireless Network Name (SSID)The name of the wireless network you want to PIN, also called Service Set Identier (SSID).Start PINClick this button to start WPS conguration process if the client device has a WPS PIN number.Wi-Fi Protected Setup (WPS) SettingsWi-Fi Protected Setup (WPS) is an optional certication program from the Wi-Fi Alliance that is designed to ease the task of setting up and conguring security on a wireless network. Self-PIN NumberDisplays the default PIN number of the travel router.Push Button CongurationClick the Start PBC button to start WPS conguration process if the client device has a WPS button.Once conguration is complete, click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.3.2.3 AdvancedThe Advanced menu congurations greatly affect the operating performance of the travel router. This menu is intended for advanced users. It is recommended to retain the default settings. Do not change any of congurations if you are unsure about it.Advanced Wireless Network SettingsRTS ThresholdThe default and the recommended value is 2346. Should you encounter inconsistent data ow, only minor adjustments should be made.Fragmentation ThresholdFragmentation threshold refers to the amount of packets that will be fragmented before transmission. The default and recommended value is 2346 bytes.Preamble TypePreamble is use to limit the packets of data for transmission. When the connection is bad, it is recommended to use the Short Preamble.
Wireless Travel Router 41Wireless Travel Router 413. CLIENT MODE3.2.4 SystemThe System menu provides password conguration, backup and restore settings, rmware update and date and time settings.AdminThe Admin submenu allows you to change the default user name and password which are use to login.New User NameEnter the new user name here.New / Conrm PasswordEnter the password.Click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect.SettingsThe Settings submenu provides backup and restore setting functions.Save Settings to Local Hard DriveUse this function to save the current conguration settings to your local hard drive. Click Save, then select the folder where you want to save the le.Load Settings From Local Hard DriveUse this function to retrieve saved conguration settings from the local hard drive. 1 Click Browse to locate the le. 2 Click Upload Settings to transfer and apply the settings to the travel router.Restore to Factory Default SettingsClick Restore Device to restore all congurations to the factory default settings. All changes in conguration will be deleted.Restart DeviceClick Restart to reboot the travel router.
Wireless Travel Router42 Wireless Travel Router423. CLIENT MODEFirmwareThe Firmware submenu allows you to upgrade the rmware to the latest version.Current Firmware VersionDisplays the current rmware version.Firmware DateDisplays the date when the rmware was last updated.TimeThe Time submenu allows you to manually adjust the system time settings or synchronize it with a server.Current TimeDisplays the current date and time settings.Time ZoneSelect the time zone in your area.Synchronize the clock withSelect: Manual: To manually adjust the date and time.Automatic: To synchronize date and time with the server.••Default NTP ServerEnter the NTP server address to synchronize the date and time with.Set the TimeUse this option to manually set the date and time. This option is only available when Synchronize the clock with is set to Automatic.Enable Daylight SavingCheck the box to enable daylight saving time. Use the Start and End eld boxes to specify the starting and ending dates.Click Apply to save and apply settings, or click Cancel to cancel changes. The travel router will restart for new settings to take effect. 1 Download the latest rmware from the manufacturer’s website, and save it to a disk. 2 Click Browse to locate the le. 3 Click Apply to start rmware update. The system will reboot to complete update.
Wireless Travel Router 43Wireless Travel Router 433. CLIENT MODE3.2.5 StatusThe Status menu displays device, logs, trafc, and connection information.LogsThis page displays the recorded events that occur within the wireless network.Click the following buttons to view the First Page, Last Page, Previous Page, and Next Page.To delete log data, click Clear Log.To change log settings, click Log Settings.To refresh list, click Refresh.StatisticsThis page displays the trafc statistics of received and transmitted packets that passed through the travel router.Click Refresh to refresh table.Device InfoThis page displays the Firmware Version, LAN and Wireless Client information.
Wireless Travel Router444Router ModeBefore You BeginWith Router mode, you can connect and share Internet connections, les, printers, etc. between computers on the network. Note:Although you can connect the DSL or cable modem directly to your computer’s network card, it is recommend to use a broadband router as an intermediary device to delegate the handling of the Internet connection and to easily congure and share the Internet connection with other computers on a home network.ChecklistA broadband Internet connection.A DSL / cable modem provided by the ISP as part of the broadband connection installation.A broadband router that connects to the DSL / cable modem for internet connection sharing.√√√You need to connect...Connect the DSL / cable modem to the WAN port or Internet port of the broadband router using an RJ-45 Ethernet cable.If you are currently connected to a network, disable that network connection before you connect and congure the travel router.Congure your computer’s Internet protocol (TCP/IP) settings. See “1.6.1 Conguring Connections”.•••
Wireless Travel Router 45Wireless Travel Router 454. ROUTER MODE4.1 InstallationInternetADSL /Cable ModemWireless StationMobile PDANetwork DiagramThe following LED indicators should be lit...Power LED (solid)LAN LED (solid)WLAN LED (ashing green)√√√1 Adjust the switch to Router mode. 2 Connect one end of the RJ-45 Ethernet cable to the travel router and the other end to the broadband router.3 Turn on or plug in the DSL / cable modem and the broadband router.4 Connect the power adapter to the travel router and plug to an outlet or power strip. Wait for the travel router to boot.5 Check the LED indicators to verify connection.6 Enable the wireless function of the wireless clients or devices.Note:Make sure you remove the power source from the travel router rst before adjusting the mode switch.

Navigation menu