TYT ELECTRONICS THREEBANDS Analog Transceiver User Manual TH 350 1

TYT ELECTRONICS CO., LTD Analog Transceiver TH 350 1

User Manual

Download: TYT ELECTRONICS THREEBANDS Analog Transceiver User Manual TH 350 1
Mirror Download [FCC.gov]TYT ELECTRONICS THREEBANDS Analog Transceiver User Manual TH 350 1
Document ID4114692
Application IDKrgZ62YhChGvEuyXmC90PQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize130.95kB (1636900 bits)
Date Submitted2018-12-24 00:00:00
Date Available2018-12-24 00:00:00
Creation Date2018-12-20 14:54:21
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-12-20 14:54:21
Document TitleTH-350英文内页1
Document CreatorAdobe Illustrator CS4
Document Author: 0

2. POWER
19
3. VOX
19
USING TIPS
02
4. Wide / Narrow band setting
20
UNPACKING AND CHECKING EQUIPMENT
03
5. Battery saving
20
CHARGING BATTERY PACK
05
6. Step frequency setting STEP
20
Charging Precaution
05
7. TOT
20
Charging Operation
06
8. BEEP
21
Indicator light of charger will show charging condition
06
9. ABR backlight switch
21
07
10. Reverse frequency REV
21
Installation of Battery Pack
07
11. Talk around T / A
22
Antenna Installation
08
12. Tri-band stand by TDR
22
Installing Belt Clip
09
13. Transmit channel selection TX-F
22
Installing External Micro/Speaker
10
14. RX CTCSS/DCS setting R-CDC (support non-standard CTCSS/DCS)
22
11
15. TX CDCSS/DCS setting T-CDC (support non-standard CTCSS/DCS)
23
13
16. DTMF settings
24
17. Scan mode settings SMODE
25
18. scan delete settings SCAN-ADD
26
19. PTTID (PTTID switch) settings
26
INSTALLATION OF ACCESSORIES
Getting Familiar
Side key definition
Icons and description
15
Shortcut keys
16
Menu setting
17
20. MDF / A (Band A display mode)
26
Menu Function Description and Settings
19
21. MDF / B (Band B display mode)
26
19
22. MDF / C (Band C display mode)
27
1. SQL
23. Keypad lock mode LOCK M
27
24. Boot display options OPNSET
27
25. Busy channel lock BCL
28
26. Shift direction selection setting S-D
28
27. offset setting DIFFR
28
28. End of emission ROGER
28
29. Scrambler function SCRM
29
30. Compandor COMP
29
Specific Instructions
31
TECHNICAL PARAMETERS
32
Guarantee
PUSH
PUSH
MENU
‡‡ ‡
‡ ‡‡
‡‡ ‡
‡ ‡‡
‡‡‡
‡ ‡‡ ‡
‡ ‡‡‡
‡ ‡‡
‡ ‡‡
‡‡‡ ‡
‡ ‡‡ ‡
‡‡
‡‡‡
‡ ‡ ‡‡ ‡
‡ ‡ ‡‡
‡ ‡ ‡‡
MENU
‡‡‡ ‡
‡‡ ‡
‡‡‡
‡ ‡‡
‡ ‡‡
‡ ‡‡ ‡
‡ ‡‡ ‡
‡‡ ‡
‡ ‡‡‡
‡‡‡
‡ ‡ ‡‡ ‡
‡ ‡‡
‡ ‡‡
‡ ‡ ‡‡
‡ ‡ ‡‡
‡‡
4. Wide / Narrow band setting
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter W/N settings.
2. Rotate the channel knob to select WIDE/NARROW.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡ ‡‡
].
8. BEEP
5. Battery saving
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter SAVE settings.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
6. Step frequency setting STEP
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
].
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter STEP settings.
2. Rotate the channel knob to select step: 5, 6.25, 10, 12.5, 20, 25.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡ ‡‡ ‡
7. TOT
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter TOT setting.
20
‡‡ ‡
].
2. Rotate the channel knob to select OFF/1-7.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡ ‡‡ ‡
].
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter BEEP setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡ ‡‡‡
].
‡‡‡
].
9. ABR backlight switch
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter ABR settings.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
10. Reverse frequency REV
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter the REV setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡ ‡
‡ ‡‡
].
21
2. Press [ ‡ ‡ ] key to select the group: (OFF /67HZ / D023N / D023I).
3. Rotate the channel knob to select the desired CTCSS/DCS.
4. Press [ ‡ ‡ ‡ ‡ ] to confirm.
5. Press the [ ‡ ‡ ‡‡ ] button to exit to the main menu.
11. Talk around T / A
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter the T/A setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡ ‡
‡‡ ‡
].
15. TX CDCSS/DCS setting T-CDC (support non-standard CTCSS/DCS)
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
].
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter T-CDC settings.
2. Press [ ‡ ‡ ] key to select the group: (OFF / 67HZ / D023N / D023I).
3. Rotate the channel knob to select the desired CTCSS/DCS.
4. Press [ ‡ ‡ ‡ ‡ ] to confirm.
5. Press the [ ‡ ‡ ‡‡ ] button to exit to the main menu.
‡‡ ‡
12. Tri-band stand by TDR
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter TDR setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡ ‡
‡‡‡
].
‡ ‡‡ ‡
13. Transmit channel selection TX-F
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter TX-F settings.
2. Rotate the channel knob to select Auto/F1/F2/F3.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡ ‡
‡ ‡‡
].
14. RX CTCSS/DCS setting R-CDC (support non-standard CTCSS/DCS)
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter R-CDC settings.
22
‡‡ ‡
‡ ‡‡
].
23
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
Note:
1) You can send the corresponding DTMF code by pressing the button during the transmission.
2) You can set in software, and turn on Menu 19 PTT ID to send DTMF code.
17. Scan mode settings SMODE
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter SCAND setting.
2. Rotate the channel knob to select TO\CO\SE.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡ ‡
‡‡ ‡
].
16. DTMF settings
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter DTMFST settings.
2. Rotate the channel knob to select ON/OFF.
24
‡‡ ‡
‡ ‡‡ ‡
].
25
25. Busy channel lock BCL
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter BCL setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡‡
‡ ‡‡ ‡
].
29. Scrambler function SCRM
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter the SCRM setting.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
26. Shift direction selection setting S-D
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter S-D settings.
2. Rotate the channel knob to select o/+/-.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡‡
‡ ‡‡ ‡
].
‡‡‡
‡‡‡
].
‡ ‡‡
‡ ‡‡
].
30. Compandor COMP
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter COMP settings.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
27. offset setting DIFFR
After pressing [ ‡ ‡ ‡ ‡ ] , rotate the channel knob to select menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter DIFFR settings.
2. Manually input offset.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
2. Rotate the channel knob to select ON/OFF.
3. Press [ ‡ ‡ ‡ ‡ ] to confirm.
4. Press [ ‡ ‡ ‡‡ ] to exit to the main menu.
‡‡‡
‡‡ ‡
].
28. End of emission ROGER
After pressing [ ‡ ‡ ‡ ‡ ] key, rotate the channel knob to select the menu [
1. Press [ ‡ ‡ ‡‡ ‡ ] to enter the ROGER setting.
28
‡‡‡
‡ ‡‡‡
].
29
Specific Instructions
1. Side key definition
Open the programming software, select the side key function under the optional features, then
select the function you want to implement from the drop-down menu of each option, and finally
insert programming cable to write.
Specific Instructions
TECHNICAL PARAMETERS
Guarantee
2. 1750Hz tone emission
PTT+side key 1, then you can emit 1750Hz tone.
3. Channel Storage and Deleting
In the VFO mode, long press Menu, the digits on the top right of the frequency blinks, rotate knob or
up and down key to choose the numbers you want to store and then press Enter to confirm.
In the CH or MR mode, long press Menu, the digits on the top right of the frequency blinks, rotate
knob or up and down key to choose the channels you want to delete and then press Enter to confirm.
4. Reset
Press PTT and Menu to power on, radio will show RESET VFO, rotate knob or up and down key to
choose VFO or ALL.
VFO: to reset the settings in the VFO model.
ALL: to reset the settings in the all models.
31
Receiver
General
Frequency
R x:136-174MHz, 220-260MHz & 400-480MHz
Channel
128
Operating Voltage
7.4V DC
Operating Temperature
-10°C ~ +50°C
Frequency Stability
±2.5ppm
Dimension(Hxwxd
116x53x36mm
Weight
106g(battery and antenna included)
Antenna Impedence
Mode of operation
ȍ
Simplex or semi-duplex
Frequency
R x:136-174MHz, 220-260MHz & 400-480MHz
Sensitivity
‡ ‡ȝ9
Occupied Bandwidth
‡ ‡16KHz
Selectivity
‡ ‡65dB
Intermediation
‡ ‡55dB
Audio power
> 500mW
Audio distortion
‡ ‡10%
Frequency Stability
5ppm
Current
standby: 60mA working: 250Ma
Audio response(300-3400Hz)
+7 ~ -12.5dB
Transmitter
32
Frequency
Tx:144-148MHz, 222-225MHz & 420-450MHz
Power
5W
Modulation Type
FM
Spurious Power
‡ ‡-15dB
Modulation Noise
< -40dB
Modulation Distortion
< 5%
Frequency Stability
5ppm
Max Fr. Deviation
‡ ‡±5KHz
Current
‡ ‡1600mA
Audio response(300-3400Hz)
+6.5 ~ -14dB
Adjacent Ch Power
‡ ‡65dB
33
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 0
Create Date                     : 2018:12:20 14:54:21+08:00
Modify Date                     : 2018:12:20 14:54:21+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:09:17 10:04:04+08:00
Creator Tool                    : Adobe Illustrator CS4
Format                          : application/pdf
Title                           : TH-350英文内页1
Creator                         : 0
Document ID                     : uuid:eaaa6598-6d51-428e-8996-038da54b35a8
Instance ID                     : uuid:904ce4b2-462c-419e-aac8-c31697c34d83
Producer                        : Acrobat Distiller 11.0 (Windows)
Page Count                      : 21
EXIF Metadata provided by EXIF.tools
FCC ID Filing: POD-THREEBANDS

Navigation menu