Thales Communications AHV1600 Radio-altimeter Transceiver User Manual OIM AHV1600 REV01

THALES Communications Radio-altimeter Transceiver OIM AHV1600 REV01

Contents

USER MANUAL REV1

Download: Thales Communications AHV1600 Radio-altimeter Transceiver User Manual OIM AHV1600 REV01
Mirror Download [FCC.gov]Thales Communications AHV1600 Radio-altimeter Transceiver User Manual OIM AHV1600 REV01
Document ID1207478
Application IDeF/IjR98IPLrDdrWJxqxhw==
Document DescriptionUSER MANUAL REV1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize56.25kB (703102 bits)
Date Submitted2009-12-02 00:00:00
Date Available2009-12-04 00:00:00
Creation Date2009-11-25 12:32:50
Producing SoftwareGPL Ghostscript 8.54
Document Lastmod2009-11-25 12:32:50
Document TitleOIM_AHV1600_REV01
Document CreatorPDFCreator Version 0.9.3
Document Author: t0021498

OPERATION AND INSTALLATION MANUAL
AHV1600 RADAR ALTIMETER SYSTEM
TRANSMITTAL SHEET
TO:
HOLDERS OF OPERATION AND INSTALLATION MANUAL P/N: 36719226-AB, revision No.
1, dated NOV 25/09 is attached and covers all components held by every operator.
P/N: 36719226-AB.
The OIM revision No. 1, dated NOV 25/09 is attached and covers all components held by
every operator.
FILING INSTRUCTIONS
Revision 1 replaces original issue.
Original issue is deleted.
HIGHLIGHTS:
To correct the OIM P/N: 36719226-AA Original issue.
TS Page 1
NOV 25/09
OIM
AHV1600 SYSTEM
THIS PAGE INTENTIONALLY LEFT BLANK
TS Page 2
NOV 25/09
THALES Communications
OPERATION
AND
INSTALLATION MANUAL
AHV1600
Radar Altimeter System
ORIGINAL ISSUE
REF
REVISION No
: July 16/09
: 36719226-AB
: 01
TP Page 1/2
Nov 25/09
OIM
AHV1600-SYSTEM
THALES Communications
TP Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
RECORD OF REVISIONS
INSERTION
REVISION
N°
REVISION
DATE
01
2009/11/25
DATE
BY
INSERTION
REVISION
N°
REVISION
DATE
DATE
BY
ROR Page 1/2
NOV 25/09
OIM
AHV1600-SYSTEM
THALES Communications
ROR Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
RECORD OF TEMPORARY REVISIONS
TEMPORARY REVISIONS
N°
PAGE N°
INSERTED
DATE
BY
DELETED
REVISION N°
BY
RTR Page 1/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
RTR Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
SERVICE BULLETIN LIST
SERVICE
BULLETIN N°
REVISION
N°
REVISION
DATE
SUBJECT
SBL Page 1/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
SBL Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
LIST OF EFFECTIVE PAGES
SUBJECT
Title Page
PAGE
R1
DATE
SUBJECT
PAGE
DATE
NOV 25/09
105
JULY 16/09
BLANK
106
JULY 16/09
NOV 25/09
107
108
JULY 16/09
JULY 16/09
BLANK
109
JULY 16/09
Record of Temporary
Revisions
JULY 16/09
BLANK
110
111
JULY 16/09
JULY 16/09
112
JULY 16/09
Service Bulletin List
JULY 16/09
113
114
JULY 16/09
JULY 16/09
BLANK
115
JULY 16/09
NOV 25/09
116
117
JULY 16/09
JULY 16/09
BLANK
118
JULY 16/09
JULY 16/09
119
120
JULY 16/09
JULY 16/09
JULY 16/09
121
JULY 16/09
JULY 16/09
122
123
JULY 16/09
JULY 16/09
BLANK
JULY 16/09
201
202
JULY 16/09
JULY 16/09
JULY 16/09
JULY 16/09
203
JULY 16/09
JULY 16/09
204
205
JULY 16/09
JULY 16/09
206
JULY 16/09
JULY 16/09
R2
NOV 25/09
207
208
JULY 16/09
JULY 16/09
JULY 16/09
JULY 16/09
JULY 16/09
JULY 16/09
101
102
JULY 16/09
JULY 16/09
103
JULY 16/09
104
JULY 16/09
Record of Revisions
List of Effective Pages
Table of Contents
Table of Figures
R1
R1
Installation
Introduction
Identification sheet
General
Presentation
Operation
209
JULY 16/09
210
211
JULY 16/09
JULY 16/09
301
302
JULY 16/09
JULY 16/09
LEP Page 1/2
Nov 25/09
OIM
AHV1600-SYSTEM
THALES Communications
LEP Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
TABLE OF CONTENTS
PAGES
INTRODUCTION .................................................................................................................................................1
1. GENERAL INFORMATION ......................................................................................................................1
2. BLOCK PAGE NUMBERS FOR SECTIONS............................................................................................1
3. UPDATING ...............................................................................................................................................1
4. ADVISORIES............................................................................................................................................2
A. SAFETY INSTRUCTIONS / ELECTROSTATIC DISCHARGE PRECAUTIONS..................................2
B. SHORT - CIRCUIT PRECAUTIONS.....................................................................................................2
5. UNCOMMON ABBREVIATIONS AND ACRONYMS ...............................................................................3
GENERAL............................................................................................................................................................1
1. AHV1600 RADAR ALTIMETER MAIN FUNCTION..................................................................................1
2. AHV1600 BASIC PRINCIPLE...................................................................................................................1
3. BUILT IN TEST FUNCTION .....................................................................................................................3
A. POWER-UP BUILT IN TEST (PBIT).....................................................................................................3
B. INITIATED BUILT IN TEST (IBIT) ........................................................................................................3
C. CONTINUOUS BUILT IN TEST (CBIT) ................................................................................................3
4. AIRCRAFT INTERFACE ..........................................................................................................................3
PRESENTATION.............................................................................................................................................101
1. AHV1600 RADAR ALTIMETER SYSTEM GENERAL DESCRIPTION................................................101
2. AHV1600 TRANSCEIVER....................................................................................................................102
A. EXTERNAL CHARACTERISTICS ....................................................................................................103
B. INTERNAL SUB-ASSEMBLIES ........................................................................................................106
C. FUNCTIONAL CHARACTERISTICS ................................................................................................106
3. OPERATIONAL INTERFACES ............................................................................................................117
A. POWER SUPPLY .............................................................................................................................117
B. DIGITAL ARINC429 INTERFACE ....................................................................................................117
C. AID SIGNALS INTERFACE ..............................................................................................................118
D. ENVIRONMENTAL CONDITIONS ...................................................................................................119
E. IN FLIGHT CONDITIONS .................................................................................................................120
4. ANTENNA ANT-140A...........................................................................................................................120
A. GENERALITIES ON ANTENNA ANT-140A .....................................................................................120
B. PHYSICAL CHARACTERISTICS .....................................................................................................120
C. FUNCTIONAL CHARACTERISTICS ................................................................................................122
5. COAXIAL CABLES LENGHT ...............................................................................................................122
INSTALLATION ...............................................................................................................................................201
1. GENERAL CONDITIONS .....................................................................................................................201
A. POWER SUPPLY .............................................................................................................................201
B. LOCATION........................................................................................................................................201
C. WATER, SAND, AND DUST TIGHTNESS.......................................................................................201
D. MOUNTING.......................................................................................................................................201
E. INSTALLATION CONDITIONS.........................................................................................................201
2. STEP BY STEP TRANSCEIVER INSTALLATION...............................................................................202
A. CHOICE OF ANTENNAE LOCATION ..............................................................................................203
B. ANTENNA MOUNTING ....................................................................................................................204
C. CONNECTION ..................................................................................................................................205
3. VERIFICATION.....................................................................................................................................205
A. GROUND TESTS .............................................................................................................................205
B. IN FLIGHT TESTS ............................................................................................................................205
TC Page 1/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
PAGES
FUNCTIONAL CONNECTIONS WITH RELATED EQUIPMENT.........................................................205
A. INTERFACES CONNECTIONS ........................................................................................................205
B. GROUNDING AND BONDING..........................................................................................................206
C. COOLING OF THE EQUIPMENT .....................................................................................................207
D. HANDLING ........................................................................................................................................207
5. EQUIPMENT INPUTS / OUTPUTS ......................................................................................................207
A. MAIN CONNECTOR J1 ....................................................................................................................207
B. RX/TX ANTENNA..............................................................................................................................210
4.
OPERATION....................................................................................................................................................301
1. RADAR ALTIMETER ENERGIZATION ................................................................................................301
2. FUNCTIONNAL TEST ..........................................................................................................................301
3. NORMAL OPERATING MODE.............................................................................................................301
4. OUT OF RANGE OPERATION ............................................................................................................301
5. FAILURE MODE ...................................................................................................................................301
6. DEFAULT OPERATING INSTRUCTIONS ...........................................................................................302
7. OPERATIONAL LEVEL MAINTENANCE TASK...................................................................................302
A. REMOVING THE TRANSCEIVER ....................................................................................................302
B. INSTALLING THE SPARE TRANSCEIVER .....................................................................................302
TC Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
TABLE OF FIGURES
PAGES
Figure 1 – AHV1600 TRANSCEIVER SYSTEM............................................................................................4
Figure 101 – AHV1600 RADAR ALTIMETER SYSTEM BLOCK DIAGRAM ............................................101
Figure 102 – AHV1600 TRANSCEIVER - GENERAL VIEW .............................................................102
Figure 103 – OVERALL DIMENSIONS .....................................................................................................103
Figure 104 – MANUFACTURING SERIAL NUMBER LABEL ...................................................................104
Figure 105 – THALES IDENTIFICATION LABEL......................................................................................104
Figure 106 – AMENDMENT LABEL ..........................................................................................................105
Figure 107 – SPECIFIC LABEL.................................................................................................................105
Figure 108 – ORGANIZATION OF HEIGHT DATA WORD LABEL “164” ................................................108
Figure 109 – ORGANIZATION OF STATUS DATA WORD LABEL “271”................................................110
Figure 110 – ORGANIZATION OF STATUS DATA WORD LABEL “272"................................................112
Figure 111 – ORGANIZATION OF FIRST EQUIPMENT IDENTIFIER DATA WORD LABEL “371” ........112
Figure 112 – ORGANIZATION OF INTERMEDIATE EQUIPMENT IDENTIFIER DATA WORD LABEL “371” ....... 113
Figure 113 – ORGANIZATION OF LAST EQUIPMENT IDENTIFIER DATA WORD LABEL “371” .........113
Figure 114 – ORGANIZATION OF STATUS DATA WORD LABEL “377"................................................114
Figure 115 – ORGANIZATION OF HEIGHT DATA WORD LABEL “165" ................................................116
Figure 116 – ANT-140A INNER SIDE .......................................................................................................121
Figure 117 – ANT-140A OUTER SIDE......................................................................................................121
Figure 201 – ANT-140A – ANTENNAE SEPARATION AND ORIENTATION ..........................................204
Figure 202 – SURFACES BONDING CONTACT OUTLINES ..................................................................206
Figure 203 – INTERCONNECTIONS ........................................................................................................211
TF Page 1/2
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
TF Page 2/2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
INTRODUCTION
1. GENERAL INFORMATION
The manual contains the information for the installation and the operation of the AHV1600 Radar Altimeter
P/N: AHV1600-01-01 00 A for Aircraft.
2. BLOCK PAGE NUMBERS FOR SECTIONS
Each section has a separate block page number:
− 1-
99 :
General
− 101 -
199
Presentation
− 201 -
299
Installation
− 301 -
399
Operation
All values have been given in the units (or multiples or sub-multiples of these units) of the International System (S.I.). It is possible that the values are given in more usual units. The English equivalents are given into
brackets.
3. UPDATING
In case of update of the manual, detailed instructions for the insertion and deletion of applicable pages will be
given.
Revised texts, new texts or deleted texts will be located with a vertical black line in the margin.
INTRO Page 1
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
4. ADVISORIES
A. SAFETY INSTRUCTIONS / ELECTROSTATIC DISCHARGE PRECAUTIONS
This graphic symbol showing a hand on a dark background (to IEC 747-1 standard) means that the
equipment on which it appears (assembly or subassembly) contains components sensitive to electrostatic discharges.
The following rules shall be complied with when carrying out any type of servicing on equipment
bearing this symbol:
− The equipment shall be placed on a conducting or antistatic-working surface grounded through a
resistance of between 250 kohm and 1 Mega-ohm.
− The operator shall wear a cotton smock and shall be linked with the working surface by a conducting wristband through a resistance of 1 Mega-ohm.
− Soldering iron shall be grounded.
− The transport and storage of parts removed from the equipment (printed board assemblies,
modules, hybrid circuits, etc.) shall be done with conductive or antistatic packaging.
B. SHORT - CIRCUIT PRECAUTIONS
The inputs/outputs (I/O) are protected from short circuits but, by precautions no servicing shall be
performed on any active or passive components while the equipment is energized.
INTRO Page 2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
5. UNCOMMON ABBREVIATIONS AND ACRONYMS
The following abbreviations, acronyms, and symbols are used in this manual:
Abbreviation/Acronym
Identification
A/D
AGL
AID
ANT
AU
BIT
CBIT
CR
CSCI
CTZ
CW
D/A
dB
dBm
DC
DMB
EMC
Fb
FM
FT
Fore
HI
HIRF
IBIT
IEC
I/O
LO
LRU
LSB
MAX
MIN
MPC
NCD
NO
PBIT
PC
P/N
R/A or RA
RET
RF
RL
Rx
Analogical/Digital
Above Ground Level
Aircraft Installation Delay
ANTenna
Altimeter Unit
Built In Test
Continuous Built In Test
Carriage Return
Computer Software Configuration Item
Coastal Transition Zone
Continuous Wave
Digital/Analogical
deciBel
deciBel milliwatt
Direct Current
Digital and Management Board
ElectroMagnetic Compatibility
Beat Frequency
Frequency Modulation
Functional Test
Forward
HIgh
High Intensity Radiated Fields (Lightning)
Initiated Built-In-Test
International Electronical Commission
Input /Output
Low
Line Replaceable Unit
Lower Significant Bit
MAXimum
MINimum
Multi Purpose Computer
No height Computer Data
Normal Operation
Power On Built In Test
Printed Card
Part Number
Radar Altimeter
RETurn
Radio Frequency
Return Loss
Reception
INTRO Page 3
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Abbreviation/Acronym
Identification
S.I.
ST
SWR
Tx
USB
VCO
International System
Saw Tooth
Standing Wave Ratio
Transmission
Upper Significant Bit
Voltage Controlled Oscillator
INTRO Page 4
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
EQUIPMENT IDENTIFICATION SHEET
AHV1600_RADAR ALTIMETER SYSTEM
F0057
AHV1600 Transceiver
Coaxial
Antenna ANT-140A
PHYSICAL CHARACTERISTICS
MAIN COMPONENTS
Qty
DIMENSIONS (mm)
Length
Transceiver: AHV1600
Antenna: ANT140A
190 max
WEIGHT
Width Height
(kg)
90 max
≤ 2 kg
105.41 max 90.17 max
95 max
33 max 0.130 ± 20 g
P/N
AHV1600-01-01 00 A
9599-607-12352
Coaxial cables not provided
IS Page 1
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
AHV1600 TRANSCEIVER TECHNICAL CHARACTERISTICS
1- Nominal power supply: 28 Vdc
2- Power consumption: 20 W max (18 W typical)
3- Power input interruption : ≤ 2 ms
4- Connection: MIL C 39012 (TNC / RF connectors), MIL C38999 (main connectors)
5- Performance:
− Transmission
: FM/CW.
− Frequency Range
: 4.2 GHz to 4.4 GHz.
− Frequency Deviation
: 123 MHz typical.
− Transmitted Power
: + 18 dBm (63 mW) max typical.
− Height range accuracy : The maximum error, at every simulated height and within the temperature
range - 40°C / + 70°C is : ±(2 ft + 2 % H)
6- Environmental conditions:
DO160E Cat.
[(B4)X]BBB[RG]XWFDFSZZAZ[ZC][HF]M[(A4G33)(A3J33)]XXAX
AHV1600 TRANSCEIVER FUNCTIONAL CHARACTERISTICS
–
FUNCTIONS OF THE EQUIPMENT:
–
IS Page 2
Nov 25/09
Provide height Above Ground Level (AGL).
EQUIPMENT INTERFACE:
Transmission antenna.
Reception antenna.
28 Vdc supply
Main connector
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
GENERAL
1. AHV1600 RADAR ALTIMETER MAIN FUNCTION
The main function of the AHV1600 Radar Altimeter is to provide the height information, via an ARINC 429
digital bus, to the aircraft navigation system, in a range from 0 ft up to 5000 ft.
It uses the fact that the electromagnetic waves propagate through the air at a constant speed c, which is the
speed of the light.
The height information is defined as the shortest distance to the "terrain" (ground or sea).
2. AHV1600 BASIC PRINCIPLE
The AHV1600 Transceiver measures altitude above ground as a function of elapsed time from the transmission of the electromagnetic wave to its return after reflection from the ground. The transmission time is directly
proportional to the height above ground level.
It measures the shortest delay τo between the transmitted wave and the received wave, linked to the minimum distance to the terrain Ηo by the formula:
τo =
2.Ho
AIRCRAFT
MISSILE
t=2 h/c
TERRAIN (GROUND/SEA)
The AHV1600 Transceiver principle of operation is the FM/CW (Frequency Modulation / Continuous Wave)
with variable slope modulation. The basic principle of this technique is to generate a saw tooth waveform with
a slope of modulation varying as a function of altitude as shown on the figure below. The transmitted wave is
linearly modulated in frequency by the saw tooth.
Page 1
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
The AHV1600 Transceiver performs FM/CW modulation transmissions that are beat against the received
reflection. The variable slope modulation allows the beat frequency to be maintained in a given bandwidth
(window of 60 kHz to 110 kHz around centre frequency of 80 kHz). The window is then analysed through the
equivalent of a 1 kHz bandwidth filter sweeping from 15 kHz to 110 kHz. The evaluation of the aircraft altitude
is based on the measurement of the saw tooth duration and the position of the echo frequency in the window.
The detection of the beat frequency spectrum is performed by a digital signal processing function.
The transmitted wave is linearly modulated in frequency by a saw tooth.
A beat signal is then obtained by mixing the transmitted waves F(t) and received waves F(t-τi). At every instant, the frequency fbi of this signal is equal to:
fbi = F(t) - F(t-τi)
As the modulation is linear fbi is linked to τi and then to Hi by the formulae:
fbi
τi
2. Hi
∆F TST c. TST
The fbi frequencies form the beat signal spectrum.
This spectrum is constituted of all the frequencies from
the ground and the thermal noise as well.
To enable a measurement of fbo with a probability of
noise detection compatible with the integrity requirements of the Radio Altimeter, a detection level is defined.
Only frequencies, which appear in the beat signal with
energy above this level are taken into account.
As the frequencies fbi and the heights Hi are proportional, the minimum distance to the ground Ho is linked
to the minimum frequency fbo of the spectrum.
The Radio Altimeter then measures this frequency fbo,
the leading edge of the spectrum.
In the case of the Radio Altimeter, the frequency excursion ∆F is fixed and TST is made proportional to Ho by
a feedback loop that keeps fbo in a constant frequency range. The accurate measurement of the minimum fb
Page 2
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
in the beat signal spectrum provides an accurate height measurement, and a TST for the feedback loop to
keep fbo in its defined frequency range from one measurement to the other. Hence the relationship :
Ho = K . fbo where K =
c.TST
2.∆F
3. BUILT IN TEST FUNCTION
The AHV1600 Transceiver implements an operational built-in test (BIT) in the following steps:
A. POWER-UP BUILT IN TEST (PBIT)
The AHV1600 Transceiver is capable of carrying out a performance test upon completion of the initialization sequence after power up to confirm the serviceability of the assembly. This test is performed in 3 s.
B. INITIATED BUILT IN TEST (IBIT)
The AHV1600 Transceiver is capable of carrying out a performance test to confirm the serviceability
of the Transceiver upon receipt of the discrete input signal “FCT_TST“. This test is performed in 3s.
C. CONTINUOUS BUILT IN TEST (CBIT)
The AHV1600 Transceiver is carrying out a continuous test of performance of the system as a background task. Continuous BIT provides coverage to the minimum extent possible without interfering
with the normal Transceiver operation.
The BIT is controlled by the software embedded by the equipment.
4. AIRCRAFT INTERFACE
The AHV1600 transceiver interfaces with the following equipment :
− Airborne navigation computer,
− Airborne power supply,
− Two antennae.
The figure 1 shows a block diagram of the AHV1600 radar altimeter system:
Page 3
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
AVH1600 TRANSCEIVER
Digital/Management
Board
Mother Board
(Including I/O)
Radio
Module
Tx
Emission
Rx
Reception
ANT140A
4.2 /4.4 GHz Antenna
ANT140A
4.2 /4.4 GHz Antenna
Power
supply
HIRF Stage
ARINC 429 lines
Discretes
RF signals
I/O Dedicated
information
Height and
status
I/O maintenance
Figure 1 – AHV1600 RADAR ALTIMETER SYSTEM
Page 4
July 16/09
RS232 lines
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
PRESENTATION
1. AHV1600 RADAR ALTIMETER SYSTEM GENERAL DESCRIPTION
The Radar Altimeter System, named AHV1600, consists of three LRU (Line Replaceable Unit) and is composed of:
− one AHV1600 transceiver,
− one antenna ANT-140A to transmit radio frequency (RF) signal,
− one antenna ANT-140A to receive radio frequency (RF) signal.
Two coaxial cables (not provided) are necessary:
− one transmission cable, to connect the transmission antenna to the transceiver,
− one reception cable, to connect the reception antenna to the transceiver.
AHV1600_RADAR ALTIMETER
Transmission antenna ANT140A
Reception antenna ANT140A
LRU
LRU
Transceiver AHV1600
Transmission cable
Reception cable
LRU
Figure 101 – AHV1600 RADAR ALTIMETER SYSTEM BLOCK DIAGRAM
The AHV1600 is an autonomous system mounted on an aircraft and connected to:
− 28 Vdc power supply line:
•
“P28V” and “RET28V” signals.
− Transmit and receive antennae for Radio Frequency (RF) signals through coaxial cables (“TX and
RX” signals).
− Navigation and guidance systems through:
•
Dual differential ARINC429 digital output serial line (“TX429_HI_1, TX429_LO_1 and
TX429_HI_2, TX429_LO_2” signals).
Page 101
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
•
Two discrete inputs (“FCT_TST and TST_INH” signals).
•
Configurable inputs (“AID<2..0>, AID_P and SDI_SEL” signals).
2. AHV1600 TRANSCEIVER
The AHV1600 Transceiver is a compact and very light system. It is intended to fit the aircraft.
It is fixed on the aircraft structure by means of four M6 screws.
The unit is made up of a chassis with a front panel. The front panel is equipped with:
− one main connector,
− two coaxial connectors:
•
one reception connector« Rx »,
•
one transmission connector« Tx ».
Immunity label
Transmission connector
Reception connector
Main connector
ESD (Electro Static Discharge) label
THALES identification label
amendment label
Specific label
Manufacturing serial number label
Figure 102 – AHV1600 TRANSCEIVER - GENERAL VIEW
Page 102
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
A. EXTERNAL CHARACTERISTICS
(1) PHYSICAL CHARACTERISTICS
Dimensions (see figure 103): max. 190 x 90 x 95 mm.
The weight of the unit is < 2 kg.
Figure 103 – OVERALL DIMENSIONS
Note: all dimensions are in mm
(2) FRONT PANEL
The front panel bears the antennae connectors, the main
amendment label, the ESD label and the immunity label.
connectors , the specific label, the
All connectors are equipped with special caps provided electrical shielding as well as mechanical
protection.
Page 103
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
(3) IDENTIFICATION
(a) Manufacturing Serial Number Label
The manufacturing serial number label is stuck on the left side (refer to Figure 102). It is divided
into four fields, which provide the following indications:
Field Number
Field
Serial number
LRU Description
Date of manufacturing
Inspection stamp
Figure 104 – MANUFACTURING SERIAL NUMBER LABEL
(b) THALES Identification Label
The THALES identification label is stuck on the left side (refer to Figure 102). One field provides the following indication:
Field Number
Field
THALES commercial part number
Figure 105 – THALES IDENTIFICATION LABEL
Page 104
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
(c) Amendment label
Figure 106 – AMENDMENT LABEL
(d) Specific label
The specific label is stuck on the front panel (refer to Figure 102). It is divided into five fields,
which provide the following indications:
Field Number
Field
ETSO certification number
TSO certification number
FCC ID designation
DO designation
Weight
Figure 107 – SPECIFIC LABEL
Page 105
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
B. INTERNAL SUB-ASSEMBLIES
The AHV1600 Transceiver contains the following sub-assemblies:
– The Digital chassis:
• Performs the High Intensity Radiated Field (HIRF) protection, internal module interconnection,
digital and management processor capacity and power supply distribution,
• Provides the helicopter with the mechanical and electrical interfaces,
• Provides the hardware support of the downloaded software’s.
– The radio module:
• Performs the Radio Frequency (RF) signal emission, the Radio Frequency (RF) signal reception
and the Beat Frequency (BF) signal extraction.
C. FUNCTIONAL CHARACTERISTICS
(1) OPERATION DATA
•
Output signals characteristics
: ARINC 429 standard
•
Radar Altimeter height
: ARINC word label 164 and 165 (BNR and BCD)
•
Radar Altimeter Status
: ARINC word label 272
•
Timing between both word labels is described hereafter:
•
First ARINC 429 output (serial)
•
Second ARINC 429 output (serial) : IRS2 TX HI (+) / IRS2 TX LO (-)
•
ARINC 429 specification:
•
Exchange:
unidirectional asynchronous
•
Word format:
32 bits data transfer with LSB transmitted in first
•
Label format:
8 bits in octal coding from LSB position of the word
•
Parity format:
1 odd parity bit at MSB position of the word
•
Inter word gap:
4 bits minimum
: IRS1 TX HI (+) / IRS1 TX LO (-)
Note: on each word, the odd parity bit is always computed from the first 31 data bits of the word.
•
Bit duration
: 80 µs ± 2 µs
•
Bit form factor
: 40 µs ± 2 µs
Note : the bit duration corresponds to a low speed operation at 12.5 kbps.
• ARINC signals Transmission speed
: 12.5 kbps
• Input signals
: AID0, AID1, AID2, AID_P
Page 106
July 16/09
•
Low level voltage ≤ + 3.5 VDC with sink current < 2mA (logic state 1).
•
High level voltage ≥ +15.3 VDC with sink current < 1 mA (logic state 0).
•
Maximum level voltage ≤ +32.2 VDC.
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
when measured to the “M_GND” reference signal.
•
Frame structure on IRSx TX HI/LO differential output serial line:
•
six words transmitted in accordance with the following chronological order:
1- Height data word label 164
2- Status data word label 271
3- Status data word label 272
4- Data word label 371 (first equipment identifier data word)
5- Height data word label 377
6- Height data word label 165
•
Frame rate on IRSx TX HI/LO differential output serial line: 40 ms ± 1 ms
(2) DATA WORD ORGANIZATION
(a) height data word label 164 description :
Label data field:
Bits<8..1>
Label value
001 011 10
164OCT
Source Destination Identifier (SDI) data field :
Bits<10..9>
Discrete input “SDI_SEL”
00
Undefined
01
Discrete grounded
10
Discrete open
11
Not used
Functional Test Inhibit (FTI) data:
Bits<11>
Discrete input “TST_INH”
Discrete open
Discrete grounded
Page 107
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Height data field:
Bits<29..13>Height value
Height range from 0 ft up to + 5500 ft
LSB value 0.125 ft
Height value coded in 2 complement on 17 bits
(Sign bit<29> - LSB bit<13>)
Status Matrix data field (BNR numeric data word):
Failure warning (FW)
01
No Computed Data (NCD)
10
Functional Test (FT)
11
Normal Operation (NO)
FTI
Spare
Height data value in BNR format coded in two’s complement
LSB
SM
SDI
Label data field:
Page 108
July 16/09
Bits<8..1>
Label value
100 111 01
271OCT
Label « 164 »
Figure 108 – ORGANIZATION OF HEIGHT DATA WORD LABEL “164”
(b) Status data word label 271 description
MSB
00
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Sign
Parity
32
Validity
LSB
Bits<31..30>
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
Source Destination Identifier (SDI) data field :
Bits<10..9>
Discrete input “SDI_SEL”
00
Undefined
01
Discrete grounded
10
Discrete open
11
Not used
Aircraft Installation delay (AID) data field :
Bits<14..11>
AID Value (fte)
AID_P
AID<2..0>
111
Reserved
111
Configurable input value not authorized
110
Configurable input value not authorized
110
Reserved
101
Configurable input value not authorized
101
Reserved
100
Reserved
100
Configurable input value not authorized
011
Configurable input value not authorized
011
Reserved
010
Reserved
010
Configurable input value not authorized
001
46.625fte
001
Configurable input value not authorized
000
Reserved
000
Undefined
Functional Test data:
Bits<17>
Discrete input “FCT_TST”
Discrete grounded
Discrete open
Page 109
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Test inhibit data:
Bits<18>
Discrete input “TST_INH”
Discrete grounded
Discrete open
Status Matrix data field (discrete data word):
Not used
11
Failure warning (FW)
13
12 11 10
AID0
Reserved
Reserved
FCT_TST
TST_INH
Reserved
Reserved
Reserved
Spare
Reserved
Spare
Reserved
Spare
Reserved
Spare
SM
14
SDI
Label data field:
Bits<8..1>
Label value
010 111 01
272OCT
Source Destination Identifier (SDI) data field :
Bits<10..9>
Page 110
July 16/09
Discrete input “SDI_SEL”
00
Undefined
01
Discrete grounded
10
Discrete open
11
Not used
Label « 271 »
Figure 109 – ORGANIZATION OF STATUS DATA WORD LABEL “271”
(c) Status data word label 272 description
MSB
10
LSB
Not used
AID1
Normal Operation (NO)
01
AID2
00
AID_P
Validity
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15
Spare
Parity
32
Bits<31..30>
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
AHV1600 Transceiver function data field :
Bits<18..17>
AU Transceiver function”
00
Search
01
Track
10
No function
11
Reserved
Bits<19>
PBIT / IBIT
BIT in progress
BIT not required
PBIT / IBIT data :
AHV1600 Transceiver mode data field:
Bits<21..20>
AU Transceiver mode
00
Reserved
01
Operational
10
Reserved
11
Reserved
Failure data field:
Logic state
Bit<29..24>
Tx antenna
Rx antenna
PSU
Failure
No failure
Radio failure:
I/O
CPU
Radio
Problem detected on radio board
CPU failure: Problem detected on CPU board
I/O failure:
Problem detected on I/O board
PSU failure: Problem detected on PSU board
Rx antenna failure: Impedance on RX antenna fail (50 ohms not detected)
Rx antenna failure: Impedance on TX antenna fail (50 ohms not detected)
Page 111
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Status Matrix data field (discrete data word):
20
19
18
17
16
15
14
13
12
11
10
SDI
Label « 272 »
MSB
21
LSB
22
Spare
23
Reserved
24
Reserved
25
Reserved
26
AU Transceiver function
27
PBIT / IBIT
28
AU Transceiver mode
29
Reserved
Failure warning (FW)
Reserved
11
Spare
Not used
Spare
10
Radio failure
Not used
CPU failure
01
I/O failure
Normal Operation (NO)
PSU failure
SM
00
Rx_ANT failure
30
Validity
Tx_ANT failure
31
Parity
32
Bits<31..30>
Figure 110 – ORGANIZATION OF STATUS DATA WORD LABEL “272"
(d) Status data word label 371 description
LSB
LSB
STX
Spare
Block Word Count
Name>
Page 112
July 16/09
Discrete input “SDI_SEL”
RA
Undefined
RA1
Discrete grounded
RA2
Discrete open
Label « 371 »
Figure 111 – ORGANIZATION OF FIRST EQUIPMENT IDENTIFIER DATA WORD LABEL “371”
“Name” data field defined as per three characters:
MSB
MSB
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Parity
Several words label “371” are required to transmit the equipment identifier data. These words
label “371” are encapsulated by the “STX” and “EOT” words label “371” to form the global
transmission of the equipment identifier data.
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
“Part Number” data field defined as per ten characters. e.g. “61778974AC”
Label « 371 »
MSB
Character = 1
LSB
MSB
Character = 2
Spare
LSB
MSB
Character = 3
Spare
LSB
MSB
Parity
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
LSB
“Serial Number” data field defined as all characters from Part Number plus five number characters. e.g. “61778974AC11111”
Figure 112 – ORGANIZATION OF INTERMEDIATE EQUIPMENT IDENTIFIER DATA WORD LABEL “371”
The last equipment identifier data word label “371” shall indicate the end of transmission of
equipment identifier data by transmitting the “EOT” character.
Spare
Label « 371 »
MSB
EOT
LSB
Parity
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Figure 113 – ORGANIZATION OF LAST EQUIPMENT IDENTIFIER DATA WORD LABEL “371”
Page 113
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
(e) Height data word label 377 description
Label data field:
Bits<8..1>
Label value
111 111 11
377OCT
Source Destination Identifier (SDI) data field :
Bits<10..9>
Discrete input “SDI_SEL”
00
Undefined
01
Discrete grounded
10
Discrete open
11
Not used
Equipment identification data field:
Bits<22..11>
Equipement identification
111 111 11
007HEX
Status Matrix data field (discrete data word):
Normal Operation (NO)
01
Not used
10
Not used
11
Failure warning (FW)
No data
SM
14
13
12 11 10
LSB
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15
Equipment Identification Code
SDI
Label « 377 »
Figure 114 – ORGANIZATION OF STATUS DATA WORD LABEL “377"
Page 114
July 16/09
MSB
00
LSB
Validity
MSB
Parity
32
Bits<31..30>
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
(f) Height data word label 165 description
Label data field:
Bits<8..1>
Label value
101 011 10
165OCT
Source Destination Identifier (SDI) data field :
Bits<10..9>
Discrete input “SDI_SEL”
00
Undefined
01
Discrete grounded
10
Discrete open
11
Not used
Height data field:
Bits<29..11>Height value
Height range from 0 ft up to + 5500 ft
LSB value 0.1 ft
Height value in binary coded decimal on 19 bits
(MSB bit<29> - LSB bit<11>)
Status Matrix data field (BCD numeric data word) :
Bits<31..30>
Validity”
00
Normal Operation
01
No computer Data (NCD)
10
Functional Test (FT)
11
Not used
Page 115
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
12 11 10
Height data value in BCD format
SDI
Label « 165 »
Figure 115 – ORGANIZATION OF HEIGHT DATA WORD LABEL “165"
(3) DISCRETE INPUT SIGNAL
(a) Discrete input signal “FCT_TST”
The AHV1600 transceiver receives the discrete input signal “FCT_TST” from the navigation
and guidance systems to activate its “Built In Test (BIT)” function.
The “FCT_TST” discrete input signal shall initiate the following function of the AHV1600 transceiver:
− Built In Test function initiated when it is set to low level voltage (discrete grounded).
− Built In Test function not initiated when it is set to high level voltage (discrete open).
To initiate the internal Built In Test function of the AHV1600 transceiver, the minimum time
duration of “FCT_TST” discrete input signal shall be 200ms when measured at 50% level of
the electrical changing voltage.
In the AHV1600 transceiver, the “FCT_TST” discrete input signal shall be in accordance with
the following electrical characteristics:
− Low level voltage ≤ + 3.5 VDC with sink current < 2mA (discrete grounded).
− High level voltage ≥ +15.3 VDC with sink current < 1 mA.
− Maximum level voltage ≤ +32.2 VDC.
when measured to the “M_GND” reference signal.
In the AHV1600 transceiver, the discrete input signal ”FCT_TST” shall be protected against
the indirect effect of lightning.
(b) Discrete input signal “TST_INH”
The AHV1600 transceiver receives the discrete input signal “TST_INH” from the navigation
and guidance systems to inhibit its “Built In Test (BIT)” function.
The “TST_INH” discrete input signal shall inhibit the following function of the AHV1600 transceiver:
Page 116
July 16/09
MSB
13
LSB
SM
14
LSB
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15
MSB
Parity
32
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
− Initiated Built In Test (IBIT) function inhibited when it is set to low level voltage (discrete grounded).
− Initiated Built In Test (IBIT) function enabled when it is set to high level voltage (discrete open).
In the AHV1600 transceiver, the discrete input signal “TST_INH” shall be in accordance with
the following electrical characteristics:
− Low level voltage ≤ + 3.5 VDC with sink current < 2mA (discrete grounded).
− High level voltage ≥ +15.3 VDC with sink current < 1 mA.
− Maximum level voltage ≤ +32.2 VDC.
when measured to the “M_GND” reference signal.
To inhibit the internal Built In Test function of the AHV1600 transceiver, the minimum time duration of “TST_INH” discrete input signal shall be 200ms when measured at 50% level of the
electrical changing voltage.
In the AHV1600 transceiver, the discrete input signal ”TST_INH” shall be protected against
the indirect effect of lightning.
3. OPERATIONAL INTERFACES
A. POWER SUPPLY
The Transceiver shall be powered with a 28 Vdc ± 5 %.
The voltage transients shall be:
− range 21 V to 32 V for up to 2 ms,
− range 21 V to 38 V for up to 1 ms.
The Transceiver shall be not damaged in unusual conditions:
− 50 V during 50 ms.
B. DIGITAL ARINC429 INTERFACE
This digital interface outputs the altitude information exchanged between the Transceiver and the
navigation computer. There is no ARINC 429 input.
All information is through the Main receptacle J1.
ARINC 429 outputs are differential output signals:
− first ARINC429 output (IRS1 TX HI / IRS1 TX LO),
− second ARINC 429 output (IRS2 TX HI / IRS2 TX LO).*
(1) ELECTRICAL CHARACTERISTICS
(a) When measured to the AID ground reference signal in open circuit
differential low level voltage
differential high level voltage
: - 10 Vdc ± 1 Vdc
: + 10 Vdc ± 1 Vdc
Page 117
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
differential null level voltage
differential output impedance
: 0 Vdc ± 0.5 Vdc
: 75 Ω ± 5 Ω
(b) When measured to the AID ground reference signal in loaded circuit
differential low level voltage
differential high level voltage
differential null level voltage
: between ≥ - 11 Vdc and ≤ - 7.25 Vdc
: between ≥ + 7.25 Vdc and ≤ + 11 Vdc
: between ≥ - 0.5 Vdc and ≤ + 0.5 Vdc
(2) LIGHTNING PROTECTION
Both differential output signals are protected against the indirect effect of lightning.
(3) TIMING CHARACTERISTICS
- Differential rise time : 10 µs ± 5 µs.
- Differential fall time : 10 µs ± 5 µs.
When measured from 10% to 90% level of the differential changing voltage in open circuit.
C. AID SIGNALS INTERFACE
(1) CONFIGURABLE INPUT SIGNALS
The transceiver receives the configurable input signals “AID_P” and “AID <2..0>” from the Navigation computer to code the Aircraft Installation Delay. To select the Aircraft Installation Delay, each
dedicated “AID_P” and “AID <2..0>” configurable input signal must be connected as short as possible to the “AID GROUND” reference signal (or left open).
(2) ELECTRICAL CHARACTERISTICS
- Low level voltage : < + 3.5 Vdc with sink current < 2 mA (logic state 1),
- High-level voltage : > + 15.3 Vdc with sink current < 1 mA (logic state 0),
- Maximum level voltage ≤ + 32.2 Vdc.
When measured to the “M_GND” reference signal.
(3) LIGHTNING PROTECTION
Configurable input signals are protected against the indirect effect of lightning.
(4) FUNCTIONAL CHARACTERISTICS
Page 118
July 16/09
AID length definition: from TX transceiver output to TX antenna through coaxial cable and from
TX antenna to ground through the air and from ground to RX antenna through the air and from
RX antenna to RX input transceiver through coaxial cable
AID is coded by the “AID_P” and “AID <2..0>” configurable input signals.
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
(5) PERFORMANCE
•
•
Altitude: 5000 ft
Height accuracy: (± 2 ft + 2% of the true height)
D. ENVIRONMENTAL CONDITIONS
DO160E Cat. [(B4)X]BBB[RG]XWFDFSZZAZ[ZC][HF]M[(A4G33)(A3J33)]XXAX
DO160E
section
Category B4
Temperature variation
Category B
Humidity
Category B
Operational shocks and crash safety
Category B
Vibration
Category R curve G
Explosive atmosphere
Not required Category X
Waterproofness
10
Category W
Fluids susceptibility
11
Category F
Sand and dust
12
Category D
Fungus resistance
13
Category F
Salt Fog
14
Category S
Magnetic effect
15
Environmental Condition DO160E
Temperature and altitude
Description of conducted test
Category Z
Power input
16
Voltage spike
17
Category Z
TCF declares that the AHV1600 Transceiver is able to
withstand momentary power interruption up to 2ms (Test
condition 1 of table 16-3).
Category A
18
Category Z
19
Category ZC
Category H for Conducted Susceptibility
Category F for Radiated Susceptibility
Category M
Audio frequency conducted susceptibility – power inputs
Induced signal susceptibility
Radio frequency susceptibility (radiated and conducted)
Emission of radio frequency energy
20
21
Lightning induced transient susceptibility
22
Lightning direct effects
23
Pin Injection Tests : Equipment tested to Category
(A4) for power lines and (A3) for interconnecting lines.
Cable Bundle Tests : Equipment tested to Category
(G33) for power lines and (J33) for interconnecting lines.
Not required Category X
Icing
24
Not required Category X
Electrostatic discharge
25
Category A
Fire, Flammability
26
Not required Category X
Page 119
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
E. IN FLIGHT CONDITIONS
In-flight conditions are defined in the following table:
Height range domain
From 0 ft to 5000 ft
ED-30 height range category B
From 0 ft/s to 500 ft/s up to H = 500 ft
Horizontal velocity
From 0 ft/s to 1000 ft/s up to H = 500 ft
From 0 ft/s to 20 ft/s up to H = 50 ft
ED-30 in-flight condition category L/P
From 0 ft/s to 50 ft/s at 50 ft < H < 500 ft
Height variation velocity
From 0 ft/s to 500 ft/s at 500 ft < H < 800 ft
From 0 ft/s to 2000 ft/s above H = 800 ft
Pitch angle
Range of 0 to ± 25°(at - 3 dB)
Roll angle
Range of 0 to ± 45°(at - 3 dB)
ED-30 in-flight condition category L
Radar Altimeter in-flight conditions
4. ANTENNA ANT-140A
A. GENERALITIES ON ANTENNA ANT-140A
The ANT140A antenna is a flat antenna for AHV1600 Radar Altimeter.
The complete installation of the Radar Altimeter requires two identical antennae ANT-140A: one for
transmission (Tx) and one for reception (Rx). These two antennae must be suitably located and
connected by coaxial cables to the transceiver.
The antenna is certified by the DO160B certification.
B. PHYSICAL CHARACTERISTICS
•
Dimensions: 105.41 x 90.17 x 33 mm,
• Weight: 130 ± 20 g,
The antenna is fitted with a female TNC 50 ohms coaxial connector. The connector is protected with
a special cap that must be removed before connecting the antenna.
Two labels equip the antenna: an identification label and an amendment label.
A red ink marking indicates antenna orientation into aircraft.
Page 120
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
Longitudinal Axle
Figure 116 – ANT-140A INNER SIDE
The outside bears the inscription “DO NOT PAINT”, as well as an antenna-positioning symbol.
Figure 117 – ANT-140A OUTER SIDE
A: Antenna-positioning symbol
Page 121
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
C. FUNCTIONAL CHARACTERISTICS
– Operating frequency band: 4.2 GHz – 4.4 GHz.
– Match:
•
The return loss on 50 ohms complies with the following diagram
− Isotropic gain:
•
≥ 7 dBi from 4.2 GHz to 4.4 GHz
− Radiation pattern:
Half-power beamwidth (- 3 dB):
Roll (E-Plane) : 60° ± 7°
• Pitch (H-Plane) : 50° ± 5°
•
NOTE:
The E-plane is perpendicular to the direction of the straight line painted on the external antenna front
face.
The H-plane is parallel to the direction of the straight line.
– Decoupling:
• The decoupling value for a distance of 0.4 m between antenna centres is ≥ 72 dB.
– Grounding:
• The resistance between connector core and its shielding is < 0.05 ohm.
5. COAXIAL CABLES LENGHT
(1) RECOMMENDED CABLE TYPE ( ACCORDING TO MIL.C 17F SPECIFICATION )
Double screened coaxial is essential to avoid RF leakage.
Page 122
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
(2) AID DEFINITION
Installation Delay (AID) is the total electrical length from the transceiver transmitting output port to
the aircraft skin, via the transmitting antenna the add to the distance from the antenna to the ground,
add to the distance from ground to receive antenna and back to the transceiver receiving output via
the receiving antenna.
L1+ L2 Electrical length (in feet) of the coaxial cables between the transceiver and transmitting and
receiving antennas respectively.
L3 + L4 Distance (in feet) between transmitting and receiving antennas to the ground when the aircraft is on the ground
ANT1 and ANT2 are the electrical length (in feet) of antennas (1.5 ft per antenna)
The formula for cable mechanical length calculation is:
Le +Lr
Page 123
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
INSTALLATION
1. GENERAL CONDITIONS
A. POWER SUPPLY
A nominal voltage of 28 Vdc powers the equipment.
It can nevertheless operate within a DC power supply range of 22 V to 30.3 V.
The absorbed power at 28 V is less than 20 W. It is typically 18 W.
The primary power supply circuit is isolated from the secondary circuit.
B. LOCATION
When selecting a location for equipment and working out the details for installation in the platform,
the objectives should be easy implementation and replacement of the equipment and radar altimeter
as close as possible from the antennae.
C. WATER, SAND, AND DUST TIGHTNESS
Although the equipment is designed to withstand salt spray and a high degree of humidity, it is not
waterproof and precautions should be taken to protect it against trickling or sprayed water (according to its specifications).
D. MOUNTING
The AHV1600 Transceiver is fixed on the platform by means of four M6 screws, without any preferred orientation.
E. INSTALLATION CONDITIONS
The AHV1600 Radar altimeter normal installation conditions are described hereafter:
− Radio Frequency (RF) isolation between the transmission and reception antennae > 75 dB.
− Adaptation of each antenna 50 ohms, over the frequency range (4.2 GHz to 4.4 GHz).
− Gain of each antenna at least 7 dBi and 11 dBi maximum, over the frequency range 4.2 GHz to
4.4 GHz.
− Aperture angles of the antennae are at - 3 dB (with ANT-140A):
•
•
in pitch ± 25° ± 2.5°.
in roll ± 30° ± 3.5°.
Page 201
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
− VSWR 3 to 1 of each antenna (return loss of - 6 dB or less) over the frequency range 4.2 GHz to
4.4 GHz.
− All sides lobes of each antenna must be down 40 dB or better.
− Coax cable 50 ohms double shielded type RG400 or equivalent.
− Losses in both the transmission and reception coaxial cables are of 4 dB minimum and 7 dB
maximum.
− Each antenna shall be grounded on the aircraft frame, on a common metallic grounded structure
for both antennae. The dimension of this structure being at least 15 cm around each antenna.
− No conductive features between antennae or within at least 30 cm around each antenna should
be accepted. Furthermore no conductive features should be seen in a cone of ± 70° centered on
each antenna.
− Avoid antennae to be fitted close to landing gear doors, landing gear or skids.
− Antennae should be preferably installed on a flat and horizontal surface. In any cases two antennae of a given system shall have no more than a 5° angle between their planes. Furthermore,
users have to take into account the fact that tilting any antenna with respect to the aircraft horizontal plane will affect the system performances in terms of capability to withstand aircraft’s attitudes.
− The residual resistance between the structure of the aircraft and the structure of each antenna
(body of the coaxial connector) shall not exceed 2.5 milliohm.
− The residual resistance between the structure of the aircraft and the structure of the transceiver
(body of the coaxial connector, main connector or specific reference mechanical ground pins in
the main connector) shall not exceed 2.5 milliohm.
2. STEP BY STEP TRANSCEIVER INSTALLATION
The AHV1600 Transceiver is fitted with a main MIL-C-38999 series III, 37 contacts connector and two female
MIL-C-39012/TNC coaxial connectors.
Two antennae ANT140A – transmission and reception – are required for the AHV1600 Transceiver. They are
connected by means of two coaxial cables to the AHV1600 Transceiver.
Recommended installation flowcharts:
− control the Transceiver visual aspect,
− secure the Transceiver,
− connect the Main connector,
− connect the coaxial cables.
Warning: before connecting Main connector, be sure 28 Vdc Transceiver supply is inhibited.
Page 202
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
A. CHOICE OF ANTENNAE LOCATION
− Choose the location of the antennae carefully. On it will depend the operation of the Transceiver in all flight configurations.
− Antennae are generally mounted:
• Under the fuselage.
• Such that the H fields are collinear - this configuration corresponds to maximum decoupling
between antennae. The antennae centre line should be preferably parallel to the aircraft
Fore and AFT axis.
• Along a plane parallel to the ground for a normal aircraft flight attitude; if it is not possible to
mount the antennae horizontally, a maximum angle of 5 degrees may be tolerated.
CAUTION: Pitch and roll performances may be degraded for angles exceeding this figure.
• At a location that is preferably perfectly clear of any obstacles in order to avoid hindrance of
the Transceiver by fixed obstacles (landing gear, fuel tanks, other antennae).
• The distance between antennae should be chosen on the basis of two criteria:
− Sufficiently large distance to ensure proper decoupling.
− Sufficiently small distance to ensure proper overlapping of radiation lobes for the minimum height of the antennae above the ground (touchdown or parking position).
• The distance between antennae should be the following (see Figure 201).
Page 203
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Figure 201 – ANT-140A – ANTENNAE SEPARATION AND ORIENTATION
B. ANTENNA MOUNTING
Antennae must be flush-mounted, from below, in the lower part of the aircraft fuselage.
Antennae connectors must imperatively face:
− forwards for the front antenna,
− rearwards for the rear antenna.
Each antenna bears a red ink marking to indicate assembly orientation into aircraft.
Page 204
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
C. CONNECTION
The electrical connection for operational use of each antenna is made by means of a single coaxial
connector.
Type of connector mounted on antenna: 50 ohm female coaxial type TNC connector conforming to
specification MIL-C-39012.
3. VERIFICATION
When the AHV1600 Transceiver is installed, a verification of the operation must be done using the PBIT. This
verification must be done in operational conditions.
A. GROUND TESTS
Prior to install the transceiver, check all interfering for continuity and isolation,
Install and connect the transceiver,
Energise the equipment and check that the ARINC output message contains an altitude close to
0ft. Antenna to ground distance may differ in parked situation from the touch down, so this test
altitude may vary slightly around 0 ft,
Proceed to Functional Test, the ARINC output message shall contain an altitude of 0 ft exactly,
Check that the coupling to other systems is correct.
B. IN FLIGHT TESTS
Sensitivity versus altitude: check that the “loss track” altitude of the radio altimeter is greater than
5000 ft (No Computed Data indication on ARINC output message),
Sensitivity versus attitude: Check that the track is not loss for ROLL and PITCH angles as defined by the half power antennae beamwidth.
Immunity from track to landing gear down and the helicopter structure: when flying at an altitude
higher than 1000 ft, impose the Functional Test mode. At release of the Functional Test, check
that the track mode is recovered and the transceiver outputs a correct altitude different of 0 ft.
0 ft accuracy: at touch down landing, check that the radio altimeter indicates 0 ft.
4. FUNCTIONAL CONNECTIONS WITH RELATED EQUIPMENT
A. INTERFACES CONNECTIONS
The following table displays the connector labels, the function, and the connector reference for all
connectors used for the AHV1600 transceiver.
Page 205
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
CONNECTOR
LABEL
FUNCTION
J1
Main connector
J2
To Antenna TX
MIL C 39012
34MMBX-TNC-501/1-2-NE
J3
To Antenna RX
MIL C 39012
34MMBX-TNC-501/1-2-NE
(*)
CONNECTOR REFERENCE
MATING CONNECTOR REFERENCE
MIL C- 38999 / MS27468 T 15 B-35 PN
(*)
MT934-T15B35PM112
Note: The MIL reference designates a connector including the main external characteristics:
- 37 pins,
- Shell size 15,
- Drab olive green finish,
- Male contacts,
- Normal polarization.
B. GROUNDING AND BONDING
The bottom part of the chassis is used as mechanical and electrical contact with the aircraft fuselage.
Figure 202 shows the surfaces providing bonding contact between the Transceiver chassis and the
platform structure.
13.55
35. 492
13 5
45 °
16.5
18.992
Nota : All dimensions are in mm.
Figure 202 – SURFACES BONDING CONTACT OUTLINES
Page 206
July 16/09
R 5.75
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
C. COOLING OF THE EQUIPMENT
The AHV1600 on platform installation must take into account that heat dissipation for the Transceiver is partially accomplished through natural convection requiring a minimum space between the
Transceiver and the next equipment of 10 mm.
The remained part of the heat is dissipated by conduction between the bottom part of the Transceiver chassis and the platform frame. The maximum heat dissipation is 20 watts.
D. HANDLING
No specific tools or support are required to handle or carry the Transceiver due to its small and prehensile dimensions and its lightweight.
The Transceiver is equipped with caps, which are plugged on each I/O connector, and which protect
them from ESD, sand and dust.
5. EQUIPMENT INPUTS / OUTPUTS
A. MAIN CONNECTOR J1
Socket
Contact
Contact
Gauge
Input (I) /
Output (O)
22D
Reserved
22D
Reserved
22D
Reserved
22D
Reserved
22D
FCT_TST
Simple see note 4
Discrete input signal
22D
TST_INH
Simple see note 4
Discrete input signal
22D
Reserved
22D
Reserved
22D
TX429_HI_1
Twisted/Shielded see
note 2&3
Differential output serial
line
10
22D
TX429_HI_1
Twisted/Shielded see
note 2&3
Differential output serial
line
11
22D
Signal Name
Wire Type
Installation Requirements
Reserved
Page 207
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
Socket
Contact
Contact
Gauge
12
22D
13
22D
TX429_HI_2
Twisted/Shielded see
note 2&3
Differential output serial
line
14
22D
TX429_HI_2
Twisted/Shielded see
note 2&3
Differential output serial
line
15
22D
16
22D
AID2
Simple (as short as
possible) see note 4
Configurable input signal
17
22D
P28V_1
Twisted see note 1
Power supply input 1
18
22D
P28V_2
Twisted see note 1
Power supply input 2
19
22D
RET28V_2
Twisted see note 1
Power supply return 2
20
22D
AID_P
Simple (as short as
possible) see note 4
Configurable input signal
21
22D
Reserved
22
22D
Reserved
23
22D
AID 0
Simple (as short as
possible) see note 4
Configurable input signal
24
22D
AID 1
Simple (as short as
possible) see note 4
Configurable input signal
25
22D
Reserved
26
22D
Reserved
27
22D
Reserved
28
22D
Reserved
29
22D
Reserved
30
22D
Page 208
July 16/09
Input (I) /
Output (O)
Signal Name
Wire Type
Installation Requirements
Reserved
Reserved
RET28V_1
Twisted see note 1
Power supply return 1
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
Socket
Contact
Contact
Gauge
Input (I) /
Output (O)
31
22D
Reserved
32
22D
Reserved
33
22D
E_GND
34
22D
SDI_SEL
35
22D
Reserved
36
22D
Reserved
37
22D
Reserved
Signal Name
Wire Type
Installation Requirements
Electrical reference
ground
Simple (as short as
possible) see note 4
Configurable input signal
Note 1 :Twisted wire type
Note 2 : Twisted + Shielded wire type (shield shall be terminated at the connector EMI backshell)
Note 3 :ARINC data bus A2 (12.5 Khz)
Page 209
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
A2
Note 4 : Simple wire type
Note 5: The M_GND reference signal must be connected to the mechanical reference ground of the carrier
B. RX/TX ANTENNA
Connector
Contact
Contact Gauge
Input (I) / Output (O)
Signal Name
RX
TNC
RX
TX
TNC
TX
Page 210
July 16/09
Wire Type
Installation
Requirements
Coaxial
cable
Coaxial
cable
Length according
to AID selection
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
FCT_TST
TST_INH
TX429_HI_1
TX429_LO_1
ARINC 429 LINE
TX429_HI_2
TX429_LO_2
ARINC 429 LINES
AID2
P28V_1
P28V_2
RET28V_2
AID_P
AHV1600
TRANSCEIVER
INTERNAL
DEVICES
+28Vdc (first)
+28Vdc (second)
28Vdc RETURN (second)
AID0
AID1
RET28V_1
28Vdc RETURN (first)
E_GND
SDI_SEL
Figure 203 – INTERCONNECTIONS
Page 211
July 16/09
OIM
AHV1600-SYSTEM
THALES COMMUNICATIONS
OPERATION
1. RADAR ALTIMETER ENERGIZATION
The AHV1600 radar altimeter is not provided with an “ON-OFF” switch. The equipment starts operating as
soon as the + 28 VDC power supply is applied by a circuit breaker or other mean located on the helicopter
front panel.
2. FUNCTIONNAL TEST
When the functional test is requested, the system shall outputs a 100 ft test height and functional test is indicated in the status matrix of word labels 164 and 165.
3. NORMAL OPERATING MODE
When on ground or flying in the system range, the radar altimeter shall output the helicopter height above the
ground with the specified accuracy. Alarms shall be out of view.
The status matrix of ARINC 429 words shall indicate the Normal Operation status.
4. OUT OF RANGE OPERATION
When the helicopter is flying outside the system range (above 5000 ft), the radar altimeter shall enters in the
loss of track mode (search mode).
The status matrix of ARINC 429 words shall indicate the No Computed Data status.
5. FAILURE MODE
When a failure is detected by the radar altimeter monitoring, when the helicopter is either on ground or flying,
it is signalled.
The status matrix of ARINC 429 words shall indicate the Failure Warning status.
Page 301
July 16/09
OIM
AHV1600-SYSTEM
THALES Communications
6. DEFAULT OPERATING INSTRUCTIONS
Default
No output data
Possible cause
- Radar altimeter not powered
- Radar altimeter power supply failure
- wiring
Corrective action
- Check circuit breaker
- Change power supply module
- Check wiring
Output data with Failure Warn- - Radar altimeter failure
ing status
- Change transceiver
Output data with No Computed - Loss of system sensitive when heliData indication
copter on ground or flying in the equipment operating range
- Check antennae installation
- Change transceiver
7. OPERATIONAL LEVEL MAINTENANCE TASK
The Operational level maintenance task consists in removing and replacing the transceiver (LRU) in case of
failure.
A. REMOVING THE TRANSCEIVER
Recommended removing flowchart:
–
–
–
–
power-off the transceiver,
disconnect the three cables from front panel,
remove the four M6 screws which secure the unit onto the aircraft structure,
remove the unit.
B. INSTALLING THE SPARE TRANSCEIVER
Refer to INSTALLATION § 2
Before installing the spare Transceiver, ensure the Transceiver location on aircraft structure is clean.
Page 302
July 16/09

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 64
Producer                        : GPL Ghostscript 8.54
Create Date                     : 2009:11:25 12:32:50+01:00
Modify Date                     : 2009:11:25 12:32:50
Title                           : OIM_AHV1600_REV01
Creator                         : PDFCreator Version 0.9.3
Author                          : t0021498
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: KVJAHV1600

Navigation menu