Thrane and Thrane A S AERO-HSD Aeronautical Satellite Telephone User Manual AeroHSD 98 119959 a18

Download:
Mirror Download [FCC.gov]
Document ID	411704
Application ID	nuQAaE71zYFPGcruaOUu/g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.03kB (1075361 bits)
Date Submitted	2004-04-06 00:00:00
Date Available	2004-04-01 00:00:00
Creation Date	2003-12-12 15:30:25
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2003-12-12 15:55:53
Document Title	AeroHSD+ User Manual 98-119959-a18.doc
Document Creator	AeroHSD+ User Manual 98-119959-a18 - Microsoft Word
Document Author:	CC

Thrane & Thrane A/S
Aero-HSD+
User Manual
Copyright Thrane & Thrane A/S
ALL RIGHTS RESERVED
Information in this document is subject to change
without notice and does not represent a commitment on
the part of Thrane & Thrane A/S.
© 2003 Thrane & Thrane A/S. All rights reserved. Printed
in Denmark.
Trademark Acknowledgements:
WinPoET is a trademark of iVasion, a RouterWare
Company.
Company addresses:
•
Denmark:
Thrane & Thrane A/S,
Lundtoftegårdsvej 93 D,
DK-2800 Lyngby,
Denmark
Tel: +45 39 55 88 00
•
USA:
LandSea Systems, Inc.
509 Viking Drive, Suites K, L and M
Virginia Beach, VA 23452
USA
Tel: +1 757 463-9557
Document no. TT98-119959-A.
Release date: 12 December 2003
Table of Contents
Table of Contents
1.
About the Manual ..................................................... 7
1.1. Overview .......................................................... 7
1.2. Audience .......................................................... 8
1.3. Software Version................................................ 8
1.4. Related Documentation........................................ 9
2.
Introduction...........................................................
2.1. The Inmarsat Aero Service.................................
2.1.1. Overview...............................................
2.1.2. Service Explanation .................................
2.2. The Aero-HSD+ System .....................................
2.2.1. Features ...............................................
2.2.2. System Components................................
2.3. The Full Feature Handset ...................................
2.3.1. Display and LEDs .....................................
2.3.2. Function Buttons ....................................
2.3.3. Alpha-Numeric Buttons.............................
2.4. The Auxiliary Handset ........................................
2.4.1. LEDs .....................................................
2.4.2. Function Buttons ....................................
2.4.3. Numeric Buttons .....................................
2.5. Other Handset Types ........................................
2.5.1. Sigma 7 or 2.4 GHz Cordless phone ..............
11
11
11
14
16
16
17
21
22
25
29
31
32
32
34
36
36
3.
Getting started.......................................................
3.1. Initialising the System.......................................
3.1.1. To Power on the System..........................
3.1.2. To Power off the System..........................
3.2. Pin Codes........................................................
37
37
37
38
39
4.
Operation ..............................................................
4.1. Menu Navigation...............................................
4.2. Using the Full Feature Handset............................
4.2.1. Making a H+ Call from the Handset .............
41
41
43
43
Dec 2003
Table of Contents
4.3.
4.4.
4.5.
4.6.
4.7.
5.
4.2.2. Making a Call Using the Phone Book.............44
4.2.3. Using the Quick Dial Function .....................44
4.2.4. Redialling a Number ..................................44
4.2.5. Making Internal Calls.................................45
4.2.6. Transferring a Call....................................46
4.2.7. Making a Conference Call...........................47
Using the Auxiliary Handset .................................48
4.3.1. Making a Call...........................................48
4.3.2. Storing a Phone Number............................49
4.3.3. Recalling a Phone Number from Memory ........51
4.3.4. Transferring a Call....................................52
4.3.5. Redialling a Number ..................................52
4.3.6. Muting the Microphone..............................52
Using the Sigma 7 Handset....................................53
4.4.1. Making a Call...........................................53
Using the 2.4 GHz Cordless Handset ......................54
4.5.1. Making a Call...........................................54
Other Call Functions ..........................................55
4.6.1. Making a Call from an ISDN Phone ...............55
4.6.2. Sending a Fax Using H+.............................55
4.6.3. Sending a Fax Using HSD...........................56
4.6.4. Calling the Terminal..................................57
The Menus.......................................................58
4.7.1. Phone Book.............................................58
4.7.2. HandsetSetup .........................................60
4.7.3. Ring Profile .............................................65
4.7.4. Lock System...........................................65
4.7.5. Logon Menu ............................................66
4.7.6. System Setup .........................................73
4.7.7. Status ...................................................84
PC Connection ........................................................89
5.1. ISDN and MPDS Overview ...................................89
5.2. Setup of Data Equipment ....................................90
5.2.1. Hardware connection................................90
5.2.2. Setting up MPDS via Ethernet and PPPoE......92
5.2.3. Setting up ISDN.......................................96
5.2.4. Setting up a Router................................ 100
Dec 2003
Table of Contents
5.2.5. Setting up a H+ Modem Connection ...........100
5.3. Connecting to the Network................................102
6.
Troubleshooting.....................................................103
6.1. Overview .......................................................103
6.2. Error codes ....................................................104
6.2.1. BITE Errors ...........................................104
6.2.2. Cause Codes .........................................105
6.3. List of Cause Codes .........................................106
6.3.1. Logon Cause Codes ................................106
6.3.2. Cause Codes after Logon.........................108
Appendix A - Menu Tree.................................................111
Glossary......................................................................113
Index .........................................................................119
Dec 2003
Table of Contents
This page is intentionally left blank
Dec 2003
About the Manual
1.
About the Manual
1.1. Overview
Congratulations on purchasing your Aero -HSD+ product.
The Aero-HSD+ system makes it possible for you to
communicate from virtually any ocean region in the world
using the Inmarsat Swift64 and H+ service established
by Inmarsat.
This manual has the following chapters:
Chapter 2 Introduction - an overview of the Inmarsat
Aero system and its services. Also a brief description of
the Aero-HSD+ system.
Chapter 3 Getting started - a description of how to start
up the system and the use of pin codes.
Chapter 4 Operation - a detailed description of the menu
system in the terminal, and a description of the call
functions.
Chapter 5 PC – a description of how to set up a
computer for use with the Aero -HSD+ system.
Chapter 6 Troubleshooting – a short troubleshooting
guide and a description of the error messages that may
appear in the handset. Also a list of Cause codes, and
information on where to get further help if necessary.
Appendix A - Menu Tree
Dec 2003
About the Manual
1.2. Audience
This manual is a user manual for the Aero -HSD+ System.
The audience of the manual in cludes aircraft personnel
and users of the system.
1.3. Software Version
This manual was written for the Aero -HSD+ System with
the fo llowing software:
Aero-HSD+ Application Code version 1.01.
Dec 2003
About the Manual
1.4. Related Documentation
Apart from the User Manual, the following related
documentation applies to the Aero -HSD+ system:
Title
Document
Number
Aero-HSD+ Quick Guide
TT-99-119960
Contains short instructions for the daily
use of the Aero -HSD+ system.
Aero-HSD+ Installation and
Maintenance Manual
TT-98-113625
Contains extensive information for the
personnel who install the system in the
aircraft.
Sigma 7 Telephone Handset Manual
PN# 500114
(by International Communications
Group)
2.4 GHz Cordless, Installation Manual
PN# 500484
(by International Communications
Group)
“AeroROUTER 700”
PN# 500420
(by International Communications
Group)
Dec 2003
About the Manual
This page is intentionally left blank
10
Dec 2003
The Inmarsat Aero Service
2.
Introduction
Introduction
2.1. The Inmarsat Aero Service
2.1.1. Overview
The Inmarsat Swift64 (also called High Speed Data or
HSD) and H+ services are based on 4 Geo-stationary 3 rd
genera tion satellites situated above the equator. Geostationary means that the satellites are always located
in the same position, i.e. they rotate at the same speed
as that of the earth. Each satellite covers a certain area
(footprint) and supports a number of powerful spotbeams making the service available in virtually all ocean
regions on the earth between approximately 70°N and
70°S.
Note: the ISDN and MPDS services are only available on
Aero-HSD+ systems when the aircraft is positioned inside
an area with Spot Beam coverage.
The 4 Geo-Stationary Inmarsat Satellites
The satellites are your connection to the worldwide
networks, and they are managed by the Network Coordination Stations (NCSs), run by Inmarsat. The primary
Dec 2003
11
Introduction
The Inmarsat Aero Service
functions of the NCSs are to constantly keep track of
which terminals are logged on to the system, and assign
a free channel when a call is made.
The gateway between the public network and the
satellites is operated by Land Earth Stations (LES) for
the high speed data communication or Ground Earth
Stations (GES) for the global voice, fax and PC modem
data capabilities. The LES and GES are run by different
operators around the world.
The services supported by the Inmarsat Fleet comprise:
•
High speed services (64 kbit/s)
•
64 kbit/s universal data
•
56 kbit/s data
•
Speech
•
3.1 kHz audio
•
MPDS (Mobile Packet Data Service)
•
Low speed services (2.4 kbit/s)
•
Voice
•
Fax
•
Data
•
Packet Data Channel
For a more detailed explanation of the services, please
refer to the section Service Explanation on page 14.
12
Dec 2003
The Inmarsat Aero Service
Introduction
The above mentioned services allow for a wide range of
applications. Examples are shown below.
Video
Phone
STE/STU
phone
Webcam
FAX
E-mail
WWW
Important notice: Before a terminal can be used on the
network, it has to be commissioned by one of the
Inmarsat Service Providers (ISPs). For further information
on commissioning, refer to our site www.tt.dk/aero/isp
Dec 2003
13
Introduction
The Inmarsat Aero Service
2.1.2. Service Explanation
The H+ services have a lower tariff than the high speed
services, which are high quality audio or high speed data
services and thus require more bandwidth.
High Speed Services
The 64 kbit/s UDI (Unrestricted Digital Information)
service enables the bi-directional transmission of data to
and from terrestrial 64 kbit/s ISDN and MPDS networks.
The 56 kbit/s DATA service is similarly used to make a
connection to 56 kbit/s ISDN networks, which are
primarily used in North America.
The Speech and 3.1 kHz audio services make it possible
to establish high quality analogue connections with
quality equal to terrestrial analogue connections via
digital networks/switches. The Speech service is used for
high quality voice connections, whereas 3.1 kHz audio
can be used to transfer analogue signals between fax
machines and modems with an analogue 2 -wire
interface. The 3.1 kHz audio service is transparent, and is
suitable for all analogue applications including secure
telephones.
The MPDS service is a packet data service where the
tariff depends on the amount of data transmitted. This
service is a more cost-effective solution for web
browsing, and other applications where there is no need
for constant transmission of data in both directions. It is
also suitable for applications where a constant
connection is required, because the user is no longer
charged the “per minute rate”.
14
Dec 2003
The Inmarsat Aero Service
Introduction
H+ Services
The H+ service supports near terrestrial-quality Voice at
4.8 kbit/s, over two different physical channels in both
global- and spot beam. This means that the user is able
to have 2 voice connections up at all times. This can be
two incoming, two outgoing or one incoming and one
outgoing connection. This service is less expensive than
an ISDN connection, with only a small cost in voicequality.
Besides using the two voice -channels for voice, one or
both of the channels can be used for a modem or fax
connection. In both circumstances, the maximum bit rate
is 2.4kbit/s. The fax or modem can be connected to the
two-wire interface. If a fax or modem uses a channel,
this channel cannot be used for voice at the same time.
H+ also provides a low speed packet data mode, which
allows data transfers at up to 1.2 kbit/s. This service can
be used by an AFIS, ACARS or CMU to send data over the
satellite link.
Dec 2003
15
Introduction
The Aero-HSD+ System
2.2. The Aero-HSD+ System
2.2.1. Features
The Aero-HSD+ System is a unique multi-channel s olution,
combining the global voice, fax and PC modem data
capabilities of the Inmarsat Aero H+ service with the
Inmarsat Swift64 aeronautical High Speed Data service.
The Aero-HSD+ system provides the following features:
16
•
One 64 kbit/s High Speed Data channel
•
2 global voice, fax and PC modem data channels
•
1 channel for cockpit data
•
ISDN for large file transmissions, videophone etc.
•
MPDS “pay by the bit” – well suited for Internet, e mails etc.
•
RS-422/Ethernet for airborne server/IP router
•
STE/STU for secure, encrypted transmissions
•
ARINC 741 antenna compatibility
•
Small, compact and light-weight system
•
Easily upgraded to the next generation Inmarsat
high speed satellite platform (BGAN)
Dec 2003
The Aero-HSD+ System
Introduction
2.2.2. System Components
The Aero-HSD+ System includes the following system
components:
•
TT-5035A Satellite Data Unit (SDU)
•
TT-5014A High Power Amplifier (HPA)
•
TT-5035A-001 Configuration module (CM)
•
TT-5620A Full Feature Handset
•
TT-5622A Full Feature Cradle
•
TT-5621B Auxiliary Handset
•
TT-5622B Auxiliary Cradle
•
Accessories (manual, software, etc.)
A minimum working system has at least a TT-5035A SDU,
TT-5035A-001 CM, TT-5014A HPA, one TT-5620A Full
Feature Handset, one TT-5622A Full Feature Cradle plus
a High Gain Antenna system.
A full system may comprise up to six handsets, two of
which are using the 2-wire POTS interfaces, which can
also be used for faxes, PC modems, headset interface
etc.
Instructions on how to assemble the system are found in
the Installation and Maintenance Manual, together with
specifications and information on wiring.
Dec 2003
17
Introduction
The Aero-HSD+ System
The Aero HSD+ system with various options
Flush-Mount
Wireless
Aux. Handset
Full Feature
Videophone
Headset Interface Box
Fax
AFIS/ACARS, CMU
etc.
Secure Communication
High Speed Data
Router/Server
LAN/WLAN
PC #1
Laptop/PC
PC #2
PC #3
18
Dec 2003
The Aero-HSD+ System
Introduction
The TT-5035A Satellite Data Unit (SDU) and the TT5014A High Power Amplifier (HPA)
SDU
HPA
TT-5035A Satellite Data Unit (SDU)
The SDU is the controlling unit of the Aero -HSD+ system.
A Configuration Module (CM) and all the interfaces,
except for the maintenance port, are located o n the rear
of the TT-5035A Satellite Data Unit (SDU).
TT-5014A High Power Amplifier (HPA)
The High Power Amplifier (HPA) is a Linear High Power
Amplifier capable of amplifying the transmission signals of
all 4 Aero-HSD+ channels simultaneously.
Dec 2003
19
Introduction
The Aero-HSD+ System
TT-5620A Full Feature Handset and TT-5622A Full
Feature Cradle
The Full Feature
Handset is used to
configure the system
and to make and
receive calls. See
section 2.3 for a
description of
buttons, LED's and
display of the
handset.
TT-5621B Auxiliary Handset and TT-5622B Auxiliary
Cradle
The Auxiliary Handset is used to
receive and to make calls.
20
Dec 2003
The Full Feature Handset
Introduction
2.3. The Full Feature Handset
The Full Feature Handset is the primary interface for the
Aero-HSD+ system. With the Full Feature Handset you
can dial numbers, view error and status messages, and
configure the transceiver. For information on how to use
the full feature handset, see Using the Full Feature
Handset on page 42.
The Handset is divided into the following 3 inter-working
sections.
•
The Liquid Crystal Display (LCD) and Light Emitting
Diodes (LED) section. This section gives you visual
indications about the operation and status of the
system.
•
The Function buttons section. This section enables
you to interact with the software menu system of the
transceiver.
•
The Alpha-Numeric section. This section enables you
to dial and to enter data into the transceiver.
All 3 sections are explained in detail in the following
pages.
Dec 2003
21
Introduction
The Full Feature Handset
2.3.1. Display and LEDs
The following picture shows the top of the handset with
the display and LEDs. The LCD can be adjusted for
contrast and is backlit for viewing in dim light or at night.
The LCD display is graphically shown below:
Scroll Up
Calls on
Hold
Ready
AORE SB
Text Area
Scroll Down
#1
Z ] ^ _ ` a b
Secondary
Functions
Enabled
Handset
Off Hook
More Options
Available
Locked
22
Speaker
Enabled
Alphabetic
Entry
Enabled
Dec 2003
The Full Feature Handset
Introduction
The display contains a set of symbols which , together
with the 4 LEDs situated below the display, continuously
indicate the current status.
There are four LEDs below the LCD display.
H+
Alarm
HSD
Connection
• H+ LED (GREEN): The H+ LED indicates that the
system is logged on to H+ services.
• Alarm LED (RED): The Alarm LED illuminates when the
system detects a fatal or essential fault. A fault code is
also shown in the display.
• Connection LED (AMBER): The Connection LED flashes
when the handset is ringing. When a connection is
established the LED is turned off.
• HSD LED (GREEN): The HSD LED indicates that the
system is logged on to HSD services.
Dec 2003
23
Introduction
The Full Feature Handset
The below list shows the meaning of each of the various
symbols, that may appear in the display.
Symbol
Meaning
More menu entries above.
Calls on hold. Each bar represents a call on
hold. Example: 3 bars=3 calls on hold.
More menu entries below.
The G key has been pressed. The 2 nd
function will be used for next button
pressed.
A valid pin code is required to use the
terminal.
The keypad is in alpha mode. Alpha mode is
used to enter letters (for example names in
the phone book).
Note: This symbol does not indicate capital
letters. The U button is used to toggle
the Caps lock function.
The value in a menu must be selected
between certain predefined values by means
of the B and E keys.
The speaker. You can turn the external
24
speaker on and off by pressing H. The
symbol is displayed in the LCD when the
speaker is on.
The handset is off hook
Dec 2003
The Full Feature Handset
Introduction
2.3.2. Function Buttons
The Function buttons enable you to enter the menu
system of the transceiver and change various settings.
Each button is described in detail on the following pages.
Dec 2003
25
Introduction
The Full Feature Handset
Symbol
Exit button:
•
In the Menu system, pressing Exit brings
you back one level until the menu is
completely exited.
•
When you are asked YES or NO by the
system, pressing Exit is interpreted as a
NO response.
•
When you are entering data into the
transceiver, pressing Exit cancels the
entry.
Speaker button: This button turns the
external speaker on and off.
OK button:
•
When in the main screen display,
pressing OK enters the menu system.
•
When in the menu system, pressing OK
enters the selected menu.
•
When entering data, such as phone
numbers or pin codes, pressing OK
applies the e ntry.
•
When you are asked YES or NO by the
system, pressing OK is interpreted as a
YES response.
Clear button: This is a dual function button.
The primary function is to clear the last
entered digit.
Secondary function: Insert. This function is
accessed by pressing G followed by D.
The insert function is used to insert new
phone book entries, etc.
26
Meaning
Dec 2003
The Full Feature Handset
Symbol
Introduction
Meaning
Scroll up button: Also a dual function button.
The primary function is to enable you to scroll
up to menu items not shown on the 2 -line
display of the LCD.
Secondary function: Edit. Allows you to edit
previously entered information, for example
phone book entries.
The primary function of this button is to
toggle between normal mode and alpha
numeric mode.
Secondary function: Delete. Allows you to
delete previously entered information, for
example phone book entries.
The 2 nd function of the next key pressed will
be applied.
Scroll down button: The primary function is
to enable you to scroll down to menu items
not shown on the 2 -line display of the LCD.
Secondary function: Mute turns the handset
microphone on/off.
•
•
•
When pressed after a number,
initiates a call.
When pressed during a phone call, I
ends the call.
When pressed without a connection and
without any numbers entered, I
shows a list of the ten last dialled
numbers. When pressed again,
dials the selected number.
Dec 2003
27
Introduction
The Full Feature Handset
A number of keys have a 2 nd function. The following table
gives a total overview of all the 2 nd functions.
Key
28
Function
GJ
Enters the top level of the menu system.
GS
Transfers the call to a specified handset.
GT
Places a call on hold.
GU
Joins other handsets to a call.
GD
Inserts an entry, for example in the phone
book.
GB
Edits an existing entry, for example in the
phone book.
GF
Deletes an existing entry, for example in
the phone book.
GE
Mute. Turns the handset microphone
on/off.
Dec 2003
The Full Feature Handset
Introduction
2.3.3. Alpha-Numeric Buttons
The keypad can be in
normal (numeric) mode or
alpha mode. Normal mode
is used to enter digits
(phone numbers) whereas
alpha mode is used to
enter letters (such as
names in the phone book).
The F button is used to
switch between the two
modes. The _ symbol in
the display indicates that
the handset is in alpha mode. In alpha mode you can use
each of the numeric keys and the U button to select
between subsets of the alphabet and certain special
characters .
To enter a character, p ress the key a number of times
until the wanted character is shown in the displa y. For
example, to insert the letter C , you press the K button
3 times in alpha mode. The U button is used as a Caps
lock toggle when the handset is in alpha mode.
Dec 2003
29
Introduction
The Full Feature Handset
Below is an overview of the relevant keys in alpha mode.
Key
30
Available characters or functions in alpha mode
-?!,.:’$()+/1
ABC2
DEF3
GHI4
JKL5
MNO6
PQRS7
TUV8
WXYZ9
Special function

Caps lock toggle
Dec 2003
The Auxiliary Handset
Introduction
2.4. The Auxiliary Handset
The auxiliary handset provides an optional interface for
voice calls.
For information on how to use the auxiliary handset, see
Using the Auxiliary Handset on page 48.
The auxiliary handset is divided into the following 3
sections.
Dec 2003
•
The Light Emitting Diodes (LED) section. This section
gives you visual indications about the operation a nd
status of the system.
•
The Function buttons section. This section gives you
access to a few call functions, such as transfer of
calls, memory etc.
•
The Alpha-Numeric section. This section enables you
to dial numbers.
31
Introduction
The Auxiliary Handset
All 3 sections are explained in detail in the following
pages.
The auxiliary handset also provides a volume control
placed on the side of the handset.
2.4.1. LEDs
There are two LEDs on the auxiliary handset.
The left green LED lights constantly when the handset is
off-hook.
The right green LED flashes to indicate that the handset
is ringing. When a connection is established, the LED is
turned off.
2.4.2. Function Buttons
The function buttons enable you to transfer calls, redial,
store and recall phone numbers, and mute the
microphone.
32
Dec 2003
The Auxiliary Handset
Introduction
Each button is described in detail below.
Key
Dec 2003
Function
Store number. This button is used to store
phone numbers.
Memory. This button is used to recall phone
numbers from the memory.
Transfer call. This button is used to transfer
an incoming call to another handset.
Memory location 1.
(Same function as H
J)
Memory location 2.
(Same function as H
K)
Memory location 3.
(Same function as H
L)
Redial. This button is used to redial the last
dialled number.
Mute. This button is used to mute the
microphone.
Toggle hook. This button is used to toggle
between on-hook and off-hook.
33
Introduction
The Auxiliary Handset
2.4.3. Numeric Buttons
The numeric buttons are
primarily used to dial
numbers or to enter
numbers to be stored into
the memory.
Below is an overview of the relevant numeric keys.
34
Key
Available Characters or Functions
2abc
3def
4ghi
5jkl
6mno
Dec 2003
The Auxiliary Handset
Dec 2003
Introduction
Key
Available Characters or Functions
7pqrs
8tuv
9wxyz
Special function
This button is used to indicate the end
of a phone number/activate a call.
35
Introduction
Other Handset Types
2.5. Other Handset Types
For information on other types of handset, see the User
Manual for the handset.
2.5.1. Sigma7 or 2.4 GHz Cordless phone
For information on how to make a call using the Sigma 7
or 2.4 GHz Cordless phone, refer to the sections Using
the Sigma7 Handset on page 53 and Using the 2.4 GHz
Cordless Handset on page 54.
36
Dec 2003
Initialising the System
3.
Getting started
Getting started
3.1. Initialising the System
3.1.1. To Power on the System
The Aero-HSD+ system is powered by the aircraft power
system, and is powered up along with the aircraft.
The display and all LED's on the handset will light up for
a few seconds.
Below is an example of the normal readout of the
handset display, while the SDU is booting.
Initialising
Wait for Nav
#x
Initialised
Handset #x
SelfTest
#x
LoggingOn
LoggingOn
AORE
AORE SB #x
#x
Ready
AORE
Dec 2003
#x
37
Getting started
Initialising the System
When the display shows “Ready”, the system is ready to
use.
The H+ LED indicates that H+ services are logged on,
and the HSD LED indicates that HSD services are logged
on.
H+
Alarm
HSD
Ringing
Note: If the system does not log on automatically, the
reason may be that the Logon policy is set to User
Demand. In this case you have to log on using the Logon
menu. For further information, see Logon Menu on page
66.
3.1.2. To Power off the System
The system is automatically powered off along with the
aircraft.
Some aircrafts are provided with a “Sa tCom on/off”
button, which can be used to power off the system w hile
the aircraft is powered.
If the aircraft does not provide a “SatCom on/off” button,
you can use the circuit breaker to power off the system.
38
Dec 2003
Pin Codes.
Getting started
3.2. Pin Codes.
For some of the functionality of the terminals, access is
restricted by a pin code. Three different kinds of user pin
codes are used in the system:
•
•
•
one pin code for the Normal user,
one for the Super User and
one for the Service Provider.
Common for all pin code types is that the length must be
between 4 and 8 digits and that they contain digits
between 0 and 9.
Normal User Pin code
The normal everyday user can make and receive calls,
access the phone book, choose an ocean region and a
default LES and GES, and read the alarm log and status.
A Normal User will typically be the day-to-day user of the
system. All additional setup has to be carried out by a
Super User or a Service Provider.
Super User Pin code
The Super User has the same rights as the Normal User.
In addition, the Super User can access certain super user
functions. A Super User will typically be a person
responsible for setting up and maintaining the system.
Service Provider Pin code
The Service Provider has access to all functionality
accessible through the handset.
Only Thrane & Thrane and/or the supplier of the
equipment normally know this pin code.
Dec 2003
39
Getting started
Pin Codes.
This page is intentionally left blank
40
Dec 2003
Menu Navigation
4.
Operation
Operation
4.1. Menu Navigation
This section describes how to access the menu system
using the buttons and display of the Full Feature
Handset.
To access the menus, press C or GJ.
When you are in the menu system you may also press
GJ to reach the top level of the menus.
To scroll through the menus, use the
To enter the selected menu, press
B and E keys.
C.
To go back to the previous level in the menu system,
press A.
To reach a specific item in the menu system, press
GJ and a number corresponding to the entry level.
Example: Press GJN to access the 'Logon' menu
(which is the 5 th entry in the main menu).
There are 4 different levels of access to the menus:
•
Users without a pin code
•
Normal User
•
Super User
•
Service Provider.
The normal everyday functions can be used without
entering any pin codes.
Dec 2003
41
Operation
Menu Navigation
The Normal User has access to normal everyday
functions and to make changes to these.
A Super User has the same rights as the Normal User,
but can additionally access a few extra settings that are
not available to the Normal User.
The Service Provider menu can only be accessed by the
supplier or Thrane & Thrane.
The Normal User, Super User and Service Provider menus
are protected by pin codes. You will be prompted for a
pin code when entering a function that is restricted by
pin codes.
The complete Menu Tree is found in Appendix A - Menu
Tree.
All the menus are described in The Menus on page 58.
42
Dec 2003
Using the Full Feature Handset
Operation
4.2. Using the Full Feature
Handset
Any call made from the system uses one of the service
types H+ voice, ISDN or 3.1 kHz audio.
Before making a call, make sure the display shows
“Ready” and that the service LEDs (H+ and/or HSD) are
lit.
4.2.1. Making a H+ Call from the Handset
The service type used for a call from the handset is the
service type configured as default for this handset and
the LES or GES operator used w ill be the default LES or
GES operator.
To make a call from the Full Feature handset, type in
the phone number as if you were making an international
call (with the prefix 00 for automatic international calls).
Example: To dial the number o f Thrane & Thrane
(+45 39558800), press the number:
TT for international calls, MN for country code,
then LRNNQQTT, followed by I, C
or U. The display on the terminal handset shows how
the call proceeds.
You hang up by pressing I. After hanging up, the
display shows the duration of the call.
Example:
Connected:
00:01:59
The Phone Book can also be used to initiate a call, either
by selecting an entry in the phone book or by using the
Quick Dial function.
Dec 2003
43
Operation
Using the Full Feature Handset
4.2.2. Making a Call Using the Phone Book
The phone book can be used to initiate a call.
For information on how to insert or edit entries in the
phone book, see Phone Book on page 58.
To make a call using the phone book, do as follows:
1. Press B or E to access the phone book from
the main display, or enter the menu system and
select PhoneBook.
2. Find the entry you need, either by scrolling the list
with B or E, or by pressing F followed by the
first letter of the entry.
Example: To find an entry with the name Jones,
press F followed by N.
3. Press
I, C
or
U to dial the selected number.
4.2.3. Using the Quick Dial Function
To use the Quick Dial function, press one of the J→
R keys and hold it down for 1 sec. Each key is a
shortcut to a user-defined entry in the phone book. For
further information, see the section QuickDial on page
78.
4.2.4. Redialling a Number
To call the last used number, press I to show a list o f
the la st ten numbers dialled from the handset. Scroll
through the list and press I, C or U to establish a
call to the selected number.
44
Dec 2003
Using the Full Feature Handset
Operation
4.2.5. Making Internal Calls
It is possible to make internal calls between any of the
POTS phones and Full Feature handset interfaces.
To initiate an internal call, press the interface code in
the table below followed by U.
Note: The Interface Code is shown in the right bottom
corner of the display of the Full Feature Handsets.
Interf ace
Interface Code
Full Feature Handset #1
Full Feature Handset #2
Full Feature Handset #3
Full Feature Handset #4
POTS phone #1
POTS phone #2
Example: To call Full Feature Handset number 3, press
L U.
To make an internal call to all handsets,
press
Dec 2003
SSTU
45
Operation
Using the Full Feature Handset
4.2.6. Transferring a Call
It is possible to receive a call on a handset and transfer
the call to another handset.
Use the following procedure to make a Call transfer:
1. When an incoming call is received, answer the call
as usual with I or simply lift the handset from the
cradle.
2. Place the call on hold with
GT.
3. Dial the Interface Code of the desired handset, e.g.
K for Handset #2.
4. Initiate handset to handset call with U.
You have now established an active call from
handset to handset, and you can give a short
message.
5. Route the incoming call to the new handset with
GS, or by just placing the handset in the cradle.
46
Dec 2003
Using the Full Feature Handset
Operation
4.2.7. Making a Conference Call
It is possible to make conference calls between more
handsets.
Use the following procedure to make a Conference Call.
4. When a call is already established, place the call on
hold with GT.
5. Dial the desired handset e.g.
K for handset #2.
6. Initiate handset to handset call with U.
7. Join all three handsets with G
U.
To join more handsets, repeat step 1 to 4.
Dec 2003
47
Operation
Using the Auxiliary Handset
4.3. Using the Auxiliary Handset
4.3.1. Making a Call
Making a call from a normal 2-wire POTS phone
connected to one of the two analogue POTS phone
interfaces is done in the same way as a call from a
standard telephone. Just remember to press the U-key
after the number to signal to the terminal, that the
number is complete.
Example: To call Thrane & Thrane in Denmark (country
code 45) first establish a connection by pressing I or
taking the handset off the cradle. Then press the
following keys on the phone:
TTMNLRNNQQTTU
Internal calls are made the same way as with the Full
Feature handset. For information on how to make an
internal call between the handsets, see Making Internal
Calls on page 45.
48
Dec 2003
Using the Auxiliary Handset
Operation
4.3.2. Storing a Phone Number
The auxiliary handset can store up to 10 phone numbers,
in memory location 0 to 9. The A, B and C keys can
be used for accessing memory location 1, 2 and 3,
whereas the other locations are accessed using the MEM
key followed by the number of the location.
To store a phone number in the memory using the
B and C keys, do as follows:
1. Press
I or take the handset off the cradle.
2. Press
G.
A,
3. Enter the phone number you want to store,
including country code.
4. Press
G.
5. Press A, B or C depending on the memory
location you want to save the number in.
The number is now available in the memory location
you selected.
Example: To save the phone number of Thrane &
Thrane in memory location 2, take the handset off the
cradle and press the following keys:
TTMNLRNNQQTT
Dec 2003
49
Operation
Using the Auxiliary Handset
To store a phone number in the memory using the
number keys, do as follows:
1. Press
I or take the handset off the cradle.
2. Press
G.
3. Enter the phone number you want to store,
including country code.
4. Press
G.
5. Press one of the keys 0 to 9, depending on the
memory location you want to save the number in.
The number is now available in the memo ry location
you selected.
Example: To save the phone number of Thrane &
Thrane in memory location 8, take the handset off the
cradle and press the following keys:
TTMNLRNNQQTT
50
Dec 2003
Using the Auxiliary Handset
Operation
4.3.3. Recalling a Phone Number from
Memory
To recall a phone number from memory location 1, 2 or 3
using the A, B and C keys, do as follows:
1. Press
I or take the handset off the cradle.
2. Press A, B or C, depending on which memory
location you want.
The number saved in the memory location is dialled.
Example: To call the number saved in memory location
3, first establish a connection by pressing I or taking
the handset off the cradle. Then press C. The number
saved in memory location 3 is dialled.
To recall a phone number from memory using the H
key, do as follows:
3. Press
I or take the handset off the cradle.
4. Press H followed by the number of the memory
location you want.
The number saved in the memory location is dialled.
Example: To call the number saved in memory location
8, first establish a connection by pressing I or taking
the handset off the cradle. Then press H Q. The
number saved in memory location 8 is dialled.
Note: Pressing
H J.
Dec 2003
A has the same effect as pressing
51
Operation
Using the Auxiliary Handset
4.3.4. Transferring a Call
It is possible to receive a call on a handset and transfer
the call to another handset.
Use the following procedure to make a Call transfer:
6. When an incoming call is received, answer the call
as usual with I or simply lift the handset from the
cradle.
7. Place the call on hold with F.
8. Dial the Interface Code of the desired handset, e.g.
K for Handset #2.
9. Initiate handset to handset call with U.
You have now established an active call from
handset to handset, and you can give a short
message.
10. Route the incoming call to the new handset by
pressing I, or placing the handset in the cradle.
4.3.5. Redialling a Number
To call the last dialled number, first establish a
connection by pressing I or taking the handset off the
cradle. Then press D followed by U.
4.3.6. Muting the Microphone
To mute the microphone of the handset, press E. To
return to normal microphone function, press E again.
52
Dec 2003
Using the Sigma7 Handset
Operation
4.4. Using the Sigma7 Handset
4.4.1. Making a Call
To make a call using the Sigma 7 handset, type in the
phone number as if you were making an international call
(with the prefix 00 for a utomatic international calls), and
press the “On” key.
Example: To dial the number of Thrane & Thrane
(+45 39558800), press the number:
“00” for international calls, “45” for country code,
then “39558800”, followed by the “On” key.
To hang up, press the “Off” key or place the handset in
the cradle.
To answer a call, press the “On” key.
For further information on the functions of the Sigma7
handset, refer to:
“Sigma 7 Telephone Handset Manual”, PN# 500114
Dec 2003
53
Operation
Using the 2.4 GHz Cordless Handset
4.5. Using the 2.4 GHz Cordless
Handset
4.5.1. Making a Call
To make a call using the 2.4 GHz Cordless handset, type
in the phone number as if you were making an
international call (with the prefix 00 for a utomatic
international calls), and press the “TALK” key.
Example: To dial the number of Thrane & Thrane
(+45 39558800), press the number:
“00” for international calls, “45” for country code,
then “39558800”, followed by the “TALK” key.
To hang up, press the “END” key or place the handset in
the cradle.
To answer a call, press the “TALK” key.
For further information on the functions of the 2.4 GHz
Cordless handset, refer to:
“2.4 GHz Cordless, Installation Manual”, PN# 500484
54
Dec 2003
Other Call Functions
Operation
4.6. Other Call Functions
4.6.1. Making a Call from an ISDN Phone
Making a call from a phone connected to the ISDN
interface is similar to making a call from the POTS
handset, that is, you have to press U to indicate the
end of the number.
Example: To call Thrane & Thrane in Denmark (country
code 45) first establish a connection by pressing I.or
taking the handset off the cradle. Then press the
following keys on the phone:
TTMNLRNNQQTTU
4.6.2. Sending a Fax Using H+
Important: Before sending or receiving fax messages,
make sure the ground fax unit is in “Overseas” mode.
Your installation determines whether your fax unit uses
H+ or HSD.
To send a fax from one of the two analogue POTS phone
interfaces, use the prefix 01 followed by the called fax
number including the country code, followed by U.
Example: To call Thrane & Thrane in Denmark (country
code 45) press the following keys on the fax:
mcfgekggjjjjn
Dec 2003
55
Operation
Other Call Functions
4.6.3. Sending a Fax Using HSD
Important: Before sending or receiving fax messages,
make sure the ground fax unit is in “Overseas” mode.
Your installation determines whether your fax unit uses
H+ or HSD.
To send a fax using HSD (e.g. via ISDN)::, use the prefix
00 followed by the called fax number including the
country code, followed by U.
Example: To call Thrane & Thrane in Denmark (country
code 45) press the following keys on the fax
mmfgekggjjjjn
56
Dec 2003
Other Call Functions
Operation
4.6.4. Calling the Terminal
Calling the terminal or a device connected to the terminal
is similar to making international calls. The specific
Inmarsat Mobile Number (IMN)1 has to be preceded by
one of the five possible international access codes. This
code depends on whether you know which area the
terminal is within or not:
870: Area of terminal not known
(Requires that the LES or GES supports Mobility
Management).
871: AORE
872: POR
873: IOR
874: AORW
To call the IMN-number on a terminal situated in IOR, dial
+873 followed by the IMN number (where the “+” stands
for the IDD (International Direct Dialing) Prefix – which is
00 for many countries).
The different IMN numbers can be obtained from the ISP.
A terminal may have more IMN numbers, as different
services exist and more devices may be connected to the
different hardware interfaces of the terminal.
Dec 2003
57
Operation
The Menus
4.7. The Menus
This section describes each of the menus in the system.
For an overview of all the menus, see Appendix A - Menu
Tree.
4.7.1. Phone Book
The Phone Book contains 99 entries, which can be used
for making phone calls. You can edit, delete or insert
entries.
To access the Phone Book menu, you can:
•
press
B or E from the main display, or
•
press
C to enter the main menu, scroll to Phone
C.
Book and press
Edit / Ins
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
OK
Enter name
OK
Enter number
Toggle between
phone numbers
Del
OK
DeleteEntry?

OK
Entry is deleted
ABC
Toggle display between
name and number
Call selected number
Each entry holds the following information:
•
•
58
Name
Telephone number
Dec 2003
The Menus
Operation
The telephone number must include call prefix for
automatic calls and international access code. The
telephone number can hold up to 24 digits.
The name can hold up to 24 characters.
The list of entries in the phone book is sorted
alphabetically.
An entry in the phone book is displayed as a name if in
alpha mode or as a telephone number if in normal mode.
To dial from the phonebook, use BE to select an
entry and press C, I or U to dial.
Hint: You may also go directly to a specific entry by
pressing F followed by the first letter of the entry.
To insert a new entry in the phone book, do as follows:
1. From within the Phone Book menu, press GD
and enter the name of the new entry followed by
C.
2. Enter the phone number including country code and
press C.
Example: In this example the number to Thrane &
Thrane, 004539558800, is inserted.
GD
THRANEC
TTMNLRNNQQTT
You edit or delete an entry by selecting the entry in the
phone book and pressing GB or GF
respectively.
Dec 2003
59
Operation
The Menus
4.7.2. HandsetSetup
The HandsetSetup menu is used for adjusting the light
and sound settings of the handset.
The HandsetSetup menu has the following submenus:
•
•
•
•
•
•
•
•
•
Silent
Contrast
Light
Key Beep
Single Ring
Common Ring
Ring Volume
Phone Volume
ComfortNoise
Each of the submenus is described in the following
pages.
60
Dec 2003
The Menus
Operation
To access the HandsetSetup menu, enter the main menu,
scroll down to HandsetSetup and press C.
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
Dec 2003
OK
Silent
OK
Toggle between
Enabled and Disabled
Contrast
OK
Toggle between 1 to 8 *
Light
OK
Toggle between Auto,
On, Off and All off
Key Beep
OK
Toggle between
Off and 1 to 4 *
Single Ring
OK
Toggle between 8
predefined ringtones
Common Ring
OK
Toggle between 8
predefined ringtones
Ring Volume
OK
Toggle between 1 to 4 *
Phone Volume
OK
Toggle between 1 to 8 *
ComfortNoise
OK
Toggle between
Off and 1 to 3 *
61
Operation
The Menus
Silent: Select Silent to view or change the Silent setting
of the handset.
Use B and E to toggle between Enabled and
Disabled. Enabled turns off the ring tone of the handset.
Contrast: Select Contrast to view or change the contrast
setting of the handsets.
Use B and E to adjust the contrast and C to
confirm.
The value can be between * and ********.
Light: Select Light to view or change the light setting of
the handsets.
Use B and E to scroll between the settings and C
to confirm..
The value can be Auto | On | Off | All Off.
The following table shows the function of the light
settings.
62
Setting
Display Backlight
LEDs
Auto
Activated on event
Normal function
On
Always on
Normal function
Off
Always off
Normal function
All Off
Always off
Always off
Dec 2003
The Menus
Operation
Key Beep: (A “beep” sound when a key is pressed).
Select Key Beep to view or change the Key Beep setting
of the handsets.
Use B and E to adjust the Key Beep and C to
confirm..
The value can be Off or between * and ****.
Single Ring (Direct call ring tone): Select Single Ring to
view or change the ring tone setting of the current
handset.
Use B and E to scroll through the ring tones and C
to select.
You can choose between 8 predefined ring tones.
Common Ring (Broadcast call ring tone): Select Common
Ring to view or change the common ring tone setting of
all the handsets.
Use B and E to scroll through the ring tones and C
to select.
You can choose between 8 predefined ring tones.
Ring Volume: Select Ring Volume to view or change the
Ring Volume setting of the handset.
Use B and E to adjust the Ring Volume and C to
confirm.
The value can be Off or between * and ****.
Dec 2003
63
Operation
The Menus
Phone Volume: Select Phone Volume to view or change
the Volume setting for the phones.
Use B and E to adjust the Phone Volume and C to
confirm.
The value can be Off or between * and ****.
ComfortNoise: (A background noise to verify that the
line is connected). Select ComfortNoise to view or change
the Comfort Noise setting of the handset.
Use B and E to adjust the Comfort Noise and C to
confirm.
The value can be Off or between * and ***.
64
Dec 2003
The Menus
Operation
4.7.3. Ring Profile
The Ring Profile menu allows you to select from a list of
predefined ring profiles. A ring profile applies to the
entire system and determines the ring settings of each
unit in the system.
To access the Ring Profile menu, enter the main menu,
scroll down to Ring Profile and press C.
B and E
C to select.
Use
to scroll through the ring profiles and
Note: If the "Chime/Lamps Inhibit" function is used in
the installation, the "TakeOfLandng" profile is
automatically activated during takeoff and landing.
For information on how to change the ring profiles, see
the section System Setup on page 73.
4.7.4. Lock System
The Lock System menu can be used to lock the phone.
Do as follows:
To lock the phone, enter the main menu, scroll down to
Lock System, press C and enter the Normal User Pin
code.
To unlock the phone, press
User Pin code.
Dec 2003
C and enter the Normal
65
Operation
The Menus
4.7.5. Logon Menu
The Logon Menu is used to log on or off the system, or
to change the Logon settings.
The Logon Menu has the following sub menus:
•
•
•
•
•
•
Manual Logon
Custom Logon
Auto Logon
Renew Logon
Logoff
Settings (see Settings on page 68)
To access the Logon Menu, enter the main menu, scroll
down to Logon Menu and press C.
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
OK
Manual Logon
OK
Scroll through the
list of known GESs
Custom Logon
OK
Enter Sat-ID and GES-ID
Auto Logon
Renew Logon
Logoff
Settings
66
See Settings submenu
Dec 2003
The Menus
Operation
Manual Logon:
Note: Before logging on manually, make sure the Logon
Policy is set to User Demand. To change the Logon Policy,
select Settings from the Logon menu and then Logon
Policy. You can toggle between User Demand and
Automatic and select with C.
Select Manual Logon to select the GES manually from the
list of known GESs.
Use B and E to scroll through the list and C to
select.
Custom Logon:
Note: Before making a Custom Logon, make sure the
Logon Policy is set to User Demand. To change the Logon
Policy, select Settings from the Logon menu and then
Logon Policy. You can toggle between User Demand and
Automatic and select with C.
Select Custom Logon to manually enter the Sat-ID and
GES-ID you want to use for logging on.
For instance, you can use this menu if you need to log on
to a GES which is not in the list of known GESs.
Enter the Sat-ID and GES-ID and press C to confirm.
Auto Logon: Select Auto Logon to log on automatically to
the most appropriate GES.
Renew Logon: Select Renew Logon to log off and then
on again.
Logoff: Select Logoff to log off the system.
To log on again you have to use the logon menu.
Settings: See the section Settings on page 68.
Dec 2003
67
Operation
The Menus
Settings
From the Settings submenu you can change the logon
policy and view or change the lists of preferred GESs and
LESs.
The Settings menu has the following sub menus:
•
•
•
•
Logon Policy
H+ GES
ISDN LES
MPDS LES
Each of the submenus is described in the following
pages.
68
Dec 2003
The Menus
Operation
To access the Settings submenu, enter the Logon Menu,
scroll down to Settings and press C.
Settings
OK
Logon Policy
H+ GES
ISDN LES
MPDS LES
Dec 2003
OK
OK
OK
OK
Toggle between
Automatic and
User Demand
Ins
Scroll and
select from list
of known GESs
Edit
Use up/down
keys to change
priority
Scroll through
list of
preferred GESs
Scroll through
list of preferred
LESs for ISDN
Scroll through
list of preferred
LESs for MPDS
Use * key to set
the same priority
as GES below
Del
GES is deleted
Ins
Scroll and
select from list
of known LESs
Edit
Use up/down
keys to change
priority
Del
LES is deleted
Ins
Scroll and
select from list
of known LESs
Edit
Use up/down
keys to change
priority
Del
LES is deleted
69
Operation
The Menus
Logon Policy: Select Logon Policy to display or change
the logon policy.
Use B and E to toggle between Automatic and User
Demand.
•
•
Automatic: The system automatically logs on when
it is powered up.
User Demand: When the system is powered up you
have to enter the Logon menu to log on to the
system.
H+ GES: Select H+ GES to view or change the list of
preferred GESs for H+ transmission.
The H+ GES list is a list of the preferred GES operators to
use as gateway to the terrestrial network.
Important: If you are using the list of preferred GESs
you must always select at least one GES from each
Ocean region with top priority, i.e. with the same priority
as the GESs of the other ocean regions.
1. To add a GES to the list, press GD, scroll
through the list of known GESs and use C to
select the GES you want to add.
2. To delete a GES from the list, scroll to the GES you
want to delete and press GF.
3. To change the priority of a GES, scroll to the GES
you want to change and press GB.
Use B or E to move the GES to the right
priority.
Note: Priority no. 1 is the highest priority!
4. To assign the same priority to two GESs, do as
follows:
70
Dec 2003
The Menus
Operation
•
Scroll to the GES you want to change and press
GB.
•
Move the GES to just above the GES with the
priority you want.
•
Press GB followed by S.
The two GESs should now have the same
priority.
ISDN LES: Select ISDN LES to view or change the list of
preferred LESs for ISDN transmission.
The ISDN LES list is a list of the preferred LES operators
to select as gateway to the terrestrial network.
1. To add a LES to the list, press GD, scroll
through the list of known LESs and use C to
select the LES you want to add.
2. To delete a LES from the list, scroll to the LES you
want to delete and press GF.
3. To change the priority of a LES, scroll to the LES
you want to change and press GB.
Use B or E to move the LES to the right priority.
Note: Priority no. 1 is the highest priority!
Dec 2003
71
Operation
The Menus
MPDS LES: Select MPDS LES to view or change the list
of preferred LESs for MPDS transmission.
The MPDS LES list is a list of the preferred LES operators
to select as gateway to the terrestrial network
1. To add a LES to the list, press GD, scroll
through the list of known LESs and select the LES
you want to add.
2. To delete a LES from the list, scroll to the LES you
want to delete and press GF.
3. To change the priority of a LES, scroll to the LES
you want to change and press GB. Then use
B or E to move the LES to the right priority.
72
Dec 2003
The Menus
Operation
4.7.6. System Setup
The System Setup menu is used for viewing and
changing system parameters such as ring profiles, p in
codes etc.
The System Setup menu has the following submenus:
•
•
•
•
•
•
Ring Profiles (see RingProfiles on page 76)
QuickDial (see QuickDial on page 78)
Disclose Pos
Fax Setup
Pin Setup (see Pin Setup on page 79)
Configure (see Configure on page 80)
Each of the submenus is described in the following
pages.
Dec 2003
73
Operation
The Menus
To access the System Setup menu, enter the main menu,
scroll down to System Setup and press C.
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
OK
RingProfiles
See RingProfiles submenu
QuickDial
See QuickDial submenu
Super User
Pin Code
Disclose Pos
Fax Setup
Pin Setup
Configure
74
OK
OK
Toggle between
Enabled and Disabled
Fax Interface
Toggle between
Not Connected,
POTS #1,
POTS #2 and
POTS #1 & #2
See Pin Setup submenu
See Configure submenu
Dec 2003
The Menus
Operation
Disclose Pos: Select Disclose Pos to view or change the
Disclose Position status.
Note: A Super User pin code is required to change the
Disclose Position status.
Use B and
Disabled.
E to
toggle between Enabled and
If you select Enabled, the position of the aircraft will be
disclosed to the earth station for use in the Inmarsat
network.
If you select Disabled, only the ID of the current spot
beam is disclosed.
Fax Setup: Select Fax setup to determine which interface
should not ring on a broadcast call.
Use B and E to scroll through the interface options
and select with C.
You may select:
Dec 2003
•
POTS #1
•
POTS #2
•
POTS #1 & #2, or
•
Not Connected
75
Operation
The Menus
RingProfiles
The RingProfiles submenu is used to view or change the
Ring Profiles of the system. You can have up to 5 ring
profiles. One of the profiles “TakeOfLandng”, is
predefined.
Note: If the "Chime/Lamps Inhibit" function is used in
the installation, the "TakeOfLandng" profile is
automatically activated during takeoff and landing.
To access the RingProfiles submenu, enter the System
Setup menu, scroll down to RingProfiles and press C.
RingProfiles
OK
1 
2 
3 
4 
TakeOfLandng
Edit
Del
Enter new Profile name
Entry is deleted
OK
Handset #1
Handset #2
Handset #3
Handset #4
POTS #1
POTS #2
ISDN
Annunciator1
Annunciator2
Annunciator3
Toggle between "User
Edit control", "Ringer on"
and "Ringer off"
To change the name of a profile, scroll to the profile,
press GB and enter the new name.
To change the contents of a profile, do as follows:
1. Select the profile using C.
2. Scroll to the device you want to change the
settings for, and select it with C.
76
Dec 2003
The Menus
Operation
3. Use B and E to toggle between User Control,
Ringer On and Ringer Off.
Note: “User Control” is only applicable to
Handset #1 through #4. This means you can
configure each of the handsets #1 through #4
separately. For the remaining devices, “User
Control” has the same function as “Ringer On”.
To delete a profile, scroll to the profile you want to
delete and press GF.
Below is an explanation of the Annunciators:
Annunciator1 (Call Annunciator): This Annunciator is used
for signalling incoming voice calls. The Annunciator is
"flashing" like the Connection LED on a 4 -wire handset
and is turned of when the call is answered or terminated
by initiator.
Annunciator2 (Fax Annunciator): This Annunciator is used
for signalling incoming faxes. The Annunciator is "steady
ON" until a receipt for the fax has been given in the
handset.
Annunciator3 (Service Annunciator): This Annunciator is
used for indicating service availability. The Annunciator is
"steady ON" when H+ service is available.
Dec 2003
77
Operation
The Menus
QuickDial
The QuickDial submenu is a list of 1-digit numbers for
quick dialling of up to 9 favourite phone numbers.
To access the QuickDial submenu, enter the System
Setup menu, scroll down to QuickDial and press C.
QuickDial
OK









Edit
Del
Toggle between All
Phone book entries
Delete entry
To edit a quick dial entry, do as follows:
1. Scroll to the quick dial number you want to change
and press GB.
2. Scroll through the phonebook to the phone number
you want to use with the selected quick dial
number.
3. Press
C to select the phone number.
To delete a quick dial entry, scroll to the quick dial
number you want to delete and press GF .
78
Dec 2003
The Menus
Operation
Pin Setup
The Pin Setup submenu is used for disabling or
changing Pin codes.
To access the Pin Setup submenu, enter the System
Setup menu, scroll down to Pin Setup and press C.
Enter
Pin Code
Pin Setup
OK
NormalUsrPin
SuperUserPin
ServPrvdrPin
OK
Change Pin
Disable Pin
OK
Enter new
Repeat new
OK
Pin Code
Pin Code
OK
Press OK
to confirm
To access the pin codes you want to change or disable,
do as follows:
1. Scroll to the pin code type you want to change or
disable
2. Enter the current pin code for the selected type.
3. Toggle between Change Pin and Disable Pin and use
C to select the function.
Change Pin: Choosing Change Pin you will be prompted
for a new Pin code. Enter a new Pin code of 4 to 8 digits
and use C to accept the code. When you are prompted
to re-enter the Pin code, enter the code again and
accept with C.
Disable Pin: Select Disable Pin to disable the Pin code
you entered. Press C to confirm the deletion.
Dec 2003
79
Operation
The Menus
Configure
The Configure submenu is used for configuring the
handset type and the lists of known GESs, LESs and
satellites.
Note: A Service Provider pin code is required to access
the settings in the Configure menu.
The Configure menu has the following submenus:
•
•
•
•
Handset Type
Known GESs
Known LESs
Init Sat
Each of the submenus is described in the following
pages.
80
Dec 2003
The Menus
Operation
To access the Configure submenu, ente r the System
Setup menu, scroll down to Configure and press C.
Service Provider
Pin Code
Configure
OK
Handset Type
OK
Handset
Handset
Handset
Handset
#1
#2
#3
#4
Edit
Toggle between TT-Handset,
Headset and Not in Use
Edit/Ins
Known GESs
OK
Scroll through the
list of known GESs
Del
Known LESs
OK
Scroll through the
list of known LESs
Edit/Ins
Del
Init Sat
Dec 2003
OK
Sat #1
Sat #2
Sat #3
Sat #4
Spare #1
Spare #2
Spare #3
Spare #4
OK
Enter Sat Id, GES
Id, GES Code and
GES Name
GES is deleted
Enter LES Access Code
and LES Name
LES is deleted
Satellite Id
Longitude
P-Channel #1
P-Channel #2
Edit
Enter
new value
81
Operation
The Menus
Handset Type: Select Handset Type to view or change
the type of the handsets.
Use B and E to scroll through the list of handsets.
To change the handset type, select the handset you
want to change and press GB. Use B and E to
scroll between TT-Handset, Headset and Not in Use, and
press C to select .
Note: The Headset selection is only for future use.
Known GESs: Select Known GESs to view or change the
list of known GESs.
1. To add a GES to the list, press GD and enter:
Satellite ID, followed by C
GES ID, followed by C
GES Code, followed by C
GES Name , followed by C
2. To delete a GES from the list, scroll to the GES you
want to delete and press GF.
3. To edit a GES, scroll to the GES you want to change
and press GB. Enter:
Satellite ID, followed by C
GES ID, followed by C
GES Code, followed by C
GES Name , followed by C
82
Dec 2003
The Menus
Operation
Known LESs: Select Known LESs to view or change the
list of known L ESs.
1. To add a LES to the list, press GD, and enter:
LES Access (the Global LES Access Code), followed
by C
LES Name, followed by C
2. To delete a LES from the list, scroll to the LES you
want to delete and press GF.
3. To edit the LES information, scroll to the LES you
want to change and press GB. Enter:
LES Access (the Global LES Access Code), followed
by C
LES Name, followed by C
Init Sat: Select Init Sat to view or change the list of
satellites.
1. To edit the satellite information, scroll to the
satellite you want to change and press C. Enter:
Satellite ID, followed by C
Longitude, followed by C
The frequency for P-Channel #1, followed by C
The frequency for P-Channel #2, followed by C
2. To delete a satellite from the list, scroll to the
satellite you want to delete and press GF.
Dec 2003
83
Operation
The Menus
4.7.7. Status
The Status submenu is used for viewing signal strength,
LAN status, navigation data, active errors, serial numbers
and software versions.
The Status menu has the following submenus:
•
•
•
•
•
•
Channels
Nav data
SDU
SW version
LAN
Active Error
Each of the submenus is described in the following
pages.
84
Dec 2003
The Menus
Operation
To access the Status menu, enter the main menu, scroll
down to Status and press C.
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
OK
Channels
OK
Nav Data
OK
SDU
SW Version
OK
OK
LAN
Active Error
Dec 2003
OK
PRT
C1
C2
HSD
Latitude
Longitude
Altitude
Speed
Nav Source
IRS Active
AHRS Active
GPS Active
Show Detailed Nav
Show Antenna Pos
OK
Heading
Pitch
Roll
Doppler Vel
Serial No.
ISN
ICAO
Main
Handset
Handset
Handset
Handset
Scroll through a list
of active errors
85
Operation
The Menus
Channels: Select Channels to display the signal strength
(C/No in dBHz) of:
•
PRT (P-channel)
•
C1 (H+ voice channel)
•
C2 (H+ voice channel)
•
HSD (HSD channel)
Use
B and E
to select among the channels.
Note: For the channels to work properly, the value of
the signal strength should be above the values
mentioned below:
P-Channel: above 35 dBHz
C-Channels: above 42 dBHz
HSD-Channel: above 54 dBHz
If there is no signal, the display shows NA@NA.
Nav data: Select Nav data to display the navigation
data:
86
•
Latitude (as degrees, minutes, seconds)
•
Longitude (as degrees, minutes, seconds)
•
Altitude (in feet)
•
Speed (ground speed in knots)
•
Nav source – the source used for navigation; can
be IRS or AHRS+GPS
•
IRS Active – shows whether or not the IRS is
active
•
AHRS Active – shows whether or not the AHRS is
active
•
GPS Active – shows whether or not the GPS is
active
Dec 2003
The Menus
Operation
Show Detailed Nav
•
Heading – (0 to 360 degrees)
•
Pitch (in degrees U or D (up or down))
•
Roll (in degrees L or R (left or right))
•
Doppler Velocity - the speed of the aircraft
relative to the satellite, given in knots.
•
Show Antenna Pos – the position of the antenna in
degrees relative to the attitude of the aircraft, given
as the Azimuth (horizontal position) and the
Elevation (vertical position).
Use B and E to select among the Navigation
parameters and C to enter the Show Detailed Nav
menu.
SDU: Select SDU to display:
•
Serial no. (Serial number of the SDU)
•
ISN
(Inmarsat Serial number)
•
ICAO
(ICAO Address)
Use
Dec 2003
B and E
to scroll through the numbers.
87
Operation
The Menus
SW version: Select SW version to display the version
number of:
•
Main software
•
Handset 1 firmware
•
Handset 2 firmware
•
Handset 3 firmware
•
Handset 4 firmware
Use
B and E
to scroll through the software.
LAN: Select LAN to view the status of the network.
Status can be “LAN link is up” or “LAN link is down”.
Active error: Select Active error to display information of
any active errors. If there is more than one error, use
B and E to scroll through the error list.
88
Dec 2003
ISDN and MPDS Overview
5.
PC Connection
PC Connection
5.1. ISDN and MPDS Overview
Please note: ISDN and MPDS services are only
available on Aero-HSD+ systems when the aircraft is
positioned inside an area with Spot Beam coverage.
Mobile Packet Data Service (MPDS) and Integrated
Services Digital Network (ISDN) are both services that
enable the mobile user to connect to the Internet. The
maximum data transfer rate is 64 kbit/s .
The difference between the Mobile ISDN and MPDS is
that with Mobile ISDN you are charged for connection
time and with MPDS you are charged for Mbits
transferred. This means that for applications like Web
browsing, email services, IP/LAN connectivity and small to
medium size file transfer, the MPDS will be the most
economic and convenient solution.
While in MPDS or ISDN mode the terminal is flagged busy
in the Inmarsat network, i.e. it is not able to receive any
ISDN calls, until it returns to normal idle mode.
For information on how to set up the computer and
transceiver for an MPDS connection, see section 5.2.2
Setting up MPDS via Ethernet and PPPoE.
For information on how to set up the computer and
transceiver for an ISDN connection, see section 5.2.3
Setting up ISDN.
Dec 2003
89
PC Connection
Setup of Data Equipment
5.2. Setup of Data Equipment
5.2.1. Hardware connection
The illustrations below show typical hardware setups for
MPDS and ISDN data connections.
MPDS Ethernet Hardware Connection.
RJ-45
Connector
For an MPDS over Ethernet session, connect a LAN cable
between the Ethernet port of the computer and the
Ethernet port on the Aero -HSD+ system.
90
Dec 2003
Setup of Data Equipment
PC Connection
ISDN Hardware Connection.
RJ-45
Connector
The ISDN connection is made by connecting an ISDN
modem (or Terminal Adapter) to the computer. See the
manufacturer’s installation guide for details on how to do
this. Connect the modem to the Aero -HSD+ system via an
ISDN cable. The appropriate modem driver must be
installed on the computer. See the manufacturer’s
installation guide for details on how to do this.
ISDN / MPDS Hardware Connection through Router
RJ-45
Connector
For an ISDN/MPDS connection through a router, connect
a LAN cable between the Ethernet port of the computer
and an Ethernet port on the router. Follow the setup
guide from the router supplier.
Dec 2003
91
PC Connection
Setup of Data Equipment
5.2.2. Setting up MPDS via Ethernet and
PPPoE
This chapter describes the set-up and operation of MPDS
connections via Ethernet and PPPoE using various PPPoE
clients.
Windows XP with built-in PPPoE client
Prerequisites
The PC must have an Ethernet adapter and Windows XP
installed and both must be operational. There must be a
network connection between the PC and the Aero HSD+
system.
Setting up the Connection
1. From the “Start” menu select “ Settings” then
“Network Connections” and then “Create New
Connection”.
This brings up the “New Connection Wizard”.
2. Click “Next”.
3. Select “Connect to the Internet” and click “Next”.
4. Select “Setup my connection manually” and click
“Next”.
5. Select “Connect using broadband connection
requiring user name and password” and click “Next”.
6. Type a name for the connection, e.g. ”MPDS via
PPPoE” and click “Next”.
7. Select “Anyone” and click “Next”.
92
Dec 2003
Setup of Data Equipment
PC Connection
8. Type a random user name and password and click
“Next”.
9. Select the shortcut on desktop option.
10. Click “Finish”.
11. Now click the new shortcut on the desktop named
“MPDS via PPPoE”. The Aero -HSD+ system should
now connect to MPDS.
Note:
Because of the relatively long set-up time for an MPDS
connection, the PPPoE connection may some times time
out.
Windows 2000 and WinPoET™ PPPoE
client
(Tested under MS Windows 2000)
The MPDS connection via Ethernet and PPPoE can be
established using various PPPoE clients. For this example
WinPoET client was used.
Prerequisites
The computer must have a working Ethernet adapter.
Windows Dial-Up Networking (DUN) must be installed.
Dec 2003
93
PC Connection
Setup of Data Equipment
Installation
The WinPoET program is contained in a self extracting
zip-file.
1. Double click the icon, and installation begins.
2. Click ‘OK’ and ‘Next’ a few times to accept license
agreement and accept rebooting the computer (only
older windows versions.)
3. To make the first connection with WinPoET, click the
start button, and find the new program folder
‘iVasion’.
4. In ‘iVasion’, press ‘WinPoET‘ and ‘WinPoET dialer’.
5. Enter random user name and password, and click
connect.
94
Dec 2003
Setup of Data Equipment
PC Connection
The status field tells you how far you have reached in the
connection process.
The phases of a successful connection are:
•
Click Connect to start the connection process.
•
Connectin g to communications device.
•
Starting authentication process.
•
Starting projection phase.
•
Authentication completed successfully
•
Connected
After the first connection, WinPoET creates a ‘WinPoET
Connection’ in the ‘Network and dial-up connections’
folder that can be used with the standard Windows DUN
system (Automatic dialling and disconnection etc.).
Dec 2003
95
PC Connection
Setup of Data Equipment
5.2.3. Setting up ISDN
The Aero-HSD+ transceiver is connected to ISDN
equipment via an ISDN cable.
The example below shows how to setup an Internet
connection via ISDN.
1. Connect an ISDN modem to the ISDN interface.
2. Connect the modem to a PC, via a PCMCIA Card .
3. Follow the modem manufacturer’s installation
instructions for the appropriate operating system.
For the following example, a Lasat Unique 1280i ISDN
modem was installed under Windows 98.
Step 1: Install a modem
1. From the Control Panel select Modems and add a
modem.
2. Let Windows detect the modem automatically.
96
Dec 2003
Setup of Data Equipment
PC Connection
When the modem is detected, the following window
appears.
3. Verify that the modem is installed.
Dec 2003
97
PC Connection
Setup of Data Equipment
Step 2: Create a Dial-up connection
1. Open Dial-up Networking from My computer and click
“Make new connection”.
2. Give the connection a recognizable name e.g. ISDN
Connection.
3. Select the Lasat modem defined during step 1 as the
dial up device.
4. Enter the telephone number to the Internet Service
Provider. Remember country code and area code if
necessary.
98
Dec 2003
Setup of Data Equipment
PC Connection
5. Include TCP/IP as allowed network protocol and use
TCP/IP settings (Server assigned IP address, Server
assigned name server addresses etc.) as
recommended by the ISP.
After this, the connection can be made as described in
section 5.3.
Dec 2003
99
PC Connection
Setup of Data Equipment
5.2.4. Setting up a Router
For information on how to set up a router, see Chapter 3
in the manual “AeroROUTER 700” PN# 500420.
5.2.5. Setting up a H+ Modem Connection
With the Aero -HSD+ modem connection, you can use any
application supporting modem speeds at 2400 bps and a
satellite delay of 200 ms.
Do as follows to set up the modem:
1. Connect the modem to the Satcom (Satcom
connection #5 or #6).
2. On the desktop, double click "My computer" .
3. Double-click "Dial-up networking".
4. Double-click "Make new connection".
5. Type a name for the connection (e.g. "2400 BPS via
AERO-HSD+").
6. Select the modem to use.
7. Click Next.
For an outgoing call, in the phone number, the
international prefix “00” must be replaced by “02”, to
indicate a modem data call.
8. Click Next.
9. Click Finish.
100
Dec 2003
Setup of Data Equipment
PC Connection
Advanced settings for the modem connection:
Type the AT command relevant for your modem to set the
corresponding parameters in Extra settings window:
•
Communication protocol:
•
Error correction:
LAPM
•
Guard tone:
OFF (if possible)
V22bis and V42bis
NOTE: AT commands can be pre-programmed in nearly
all modems. Contact your modem manufacturer for
further information.
Dec 2003
101
PC Connection
Connecting to the Network
5.3. Connecting to the Network
A connection can be started automatically by an
application like Internet Explorer or Outlook Express. The
connection can also be established manually.
To establish the connection manually, do as follows:
1. In windows, open Dial-Up networking and double
click the appropriate icon.
2. Enter username and password if necessary.
3. Click ‘Connect’.
Wait for the connection to be completed, in dicated
by a ‘Dial-up Networking’ icon in the task bar tray.
The connection can be disconnected by right-clicking the
tray icon and choosing ‘Disconnect’.
102
Dec 2003
Overview
6.
Troubleshooting
Troubleshooting
6.1. Overview
If case of a fault situation, first check that the H+ and/or
HSD LEDs are lit, and that the display reads “Ready”.
Also make sure that the transmission path is not
obstructed, e.g. by buildings if the aircraft is on the
ground.
The system is able to display various error codes to help
you troubleshoot the system. The following sections
provide an overview and a list of some of the error codes
you may see in the display.
If you need further assistance, please call the supplier of
the Aero -HSD+ System.
Dec 2003
103
Troubleshooting
6.2. Error codes
If there is a fault, the type of fault and the fault code is
displayed in the Full Feature Handset. Where possible
the fault code is translated into plain text. Two types of
fault codes are defined:
•
BITE errors
•
Cause Codes
For a complete list of BITE error codes and Cause Codes,
please refer to the Installation and Maintenance Manual.
6.2.1. BITE Errors
A BITE error is a hardware error detected by the
automatic error detection system in the Aero -HSD+
system.
The red LED on the handset indicates the presence of a
fatal or essential BITE error.
A fatal BITE error means that you are logged off and
cannot log on again.
An essential BITE error means that the functions are
limited and one or more services are not available.
A non-essential BITE error means that there are minor
errors, but all services are still available. The red LED on
the handset will not indicate this type of error.
Please report any BITE errors to the Maintenance
Responsible.
When a BITE error is present, the display toggles
between the error code and the previous display
contents.
The BITE error is shown in the second line of the display.
A BITE error has a unique 4 -characters BITE code.
104
Dec 2003
Error codes
Troubleshooting
You can also view a ny active BITE errors in the Status
menu under Active Error.
6.2.2. Cause Codes
A Cause Code describ es a fault detected by the Earth
Station during a call.
The cause codes can help you find the reason for an
error. In most cases, errors are caused by a problem in
the satellite network.
The Cause Code is displayed in the handset for a few
seconds after the call is interrupted. If possible , the code
is translated into plain text instead of the Cause Code. A
Cause Code is a unique 4 -characters code.
The following section shows a list o f cause codes with an
explanation of the error message.
Dec 2003
105
Troubleshooting
6.3. List of Cause Codes
Note: Cause Codes should not be mistaken for BITE
error codes. See the previous page for an explanation of
the two kinds of error codes.
6.3.1. Logon Cause Codes
The following list shows the cause codes that may
appear during logon.
Display text Description
Guidance
ClassReject
The GES proposes that the
class is not supported
Class rejected
GlobChanLoss Global channel
loss
GlobCunavlb
Global C channel
not available at
GES
ManualLogRej Manuel login
rejected
Manual logon is not allowed
when logon policy is
automatic
NetworkFail
Network Failure
NoGesSignal
No GES signal
NoInitData
No valid system
table available
NoSatSignal
No satellite signal Verify that there are no
obstacle s between the
satellite and the AES antenna
106
Dec 2003
List of Cause Codes
Troubleshooting
Display text Description
Guidance
NotAuthorizd
AES not
authorized
Verify that the ICAO address
used is correct. If it is, contact
the service provider to verify
that the ICAO address is
registered.
OtherReason
Other Reason
OutsideCover
Outside spot
beam coverage
P/R/Tunavlb
Packet data
channel
unavailable
PkdtaUnavlb
Packet data
service
unavailable
SDUfailure
SDU failure
The AES is not under a spot
beam of the specified GES
Check the current bite errors
SpotChanLoss Spot channel loss
TableFull
Table Full
UserLogoff
User logoff
VCC&dUnavlb
Voice not
available at GES
VoiceUnavlb
Voice Unavailable
WrongGES
GES not existing
Check GES ID validity
WrongGESid
Wrong GES
identifier
Check GES ID validity
WrongParam
Wrong Parameter
WrongSatID
Wrong Satellite
identifier
Dec 2003
Check satellite ID validity
107
Troubleshooting
6.3.2. Cause Codes after Logon
The following list shows some of the cause codes that
may appear when the system is logged on.
Display text
Inmarsat description
Normal clearing
108
AddrComplete
Address complete
AESabsent
AES absent
AnalogFail
Analogue data equipment is not
available
AnalogRate
Required analogue data rate is not
supported
Busy
User busy
CallBared
Incoming calls are barred
CallPreempt
Call is pre-empted
CallRejected
Call is rejected
CardInvalid
Credit card type is not supported
CardRejected
Credit card number is rejected
ChanAbsent
Channel type is not implemented
ContFailure
Continuity failure
DigitalFail
Digital data equipment is not
available
DigitalRate
Required digital data rate is not
supported
GndDestFail
Destination out of service
Handover
Spot beam handover
Dec 2003
List of Cause Codes
Dec 2003
Troubleshooting
Display text
Inmarsat description
InvalidAddr
Invalid/incomplete address
InvalidNumbr
Invalid number format
NetworkFail
Network is out of order
NoAnswer
No user is responding
NoChanAvail
No channel is available
NoCircuit
No circuit/channel is available
NoRoute
No route to destination
NoUnitAvail
No channel unit is available
SatDestFail
Destination out of service
ServiceType
Service type is not supported
SwitchBusy
Switching equipment congestion
UnassignedNo
Unassigned number
Unauthorized
AES not authorised
Undefined
Undefined cause
Unspecified
Normal, unspecified
User Busy
User is busy
VoiceTypeErr
Voice channel type is not supported
WrongNumber
Unassigned number
109
Troubleshooting
This page is intentionally left blank
110
Dec 2003
Appendix A - Menu Tree
Appendix A - Menu Tree
The next page shows an overview of the complete menu
tree. For details on each menu, refer to the section The
Menus on page 58.
Dec 2003
111
Phone Book
HandsetSetup
Ring Profile
Lock System
Logon Menu
System Setup
Status
112
Main
Handset
Handset
Handset
Handset
Serial No.
ISN
ICAO
Logon Policy
H+ GES
ISDN LES
MPDS LES
#1
#2
#3
#4
Sat #1
Sat #2
Sat #3
Sat #4
Spare #1
Spare #2
Spare #3
Spare #4
Handset
Handset
Handset
Handset
Change Pin
Disable Pin
Enter
Pin Code
Heading
Pitch
Roll
Doppler Vel
Handset Type
Known GESs
Known LESs
Init Sat
Service Provider
Pin Code
NormalUsrPin
SuperUserPin
ServPrvdrPin
Latitude
Longitude
Altitude
Speed
Nav Source
IRS Active
AHRS Active
GPS Active
Show Detailed Nav
Show Antenna Pos
PRT
C1
C2
HSD
RingProfiles
QuickDial
Disclose Pos
Fax Setup
Pin Setup
Configure









Satellite Id
Longitude
P-Channel #1
P-Channel #2
1 
2 
3 
4 
TakeOfLandng
Handset #1
Handset #2
Handset #3
Handset #4
POTS #1
POTS #2
ISDN
Annunciator1
Annunciator2
Annunciator3
Channels
Nav Data
SDU
SW Version
LAN
Active Error
Manual Logon
Custom Logon
Auto Logon
Renew Logon
Logoff
Settings
Silent
Contrast
Light
Key Beep
Single Ring
Common Ring
Ring Volume
Phone Volume
ComfortNoise
Menu Tree
Appendix A - Menu Tree
Dec 2003
Glossary
Glossary
ACARS
Aircraft Communication Addressing & Reporting
System
AFIS
Automatic Flight Information Service
AHRS
Attitude and Heading Reference System
AORE
Atlantic Ocean Region East
AORW
Atlantic Ocean Region West
ATM
Air Traffic Management
baud
Modulation speed in a modem (baud ≤ bit/s)
bit
binary digit
bit/s
bits per second (baud ≤ bit/s)
BITE
Build In Test Equipment
C-channel
A channel which provides a bidirectional
communications channel between ground and
air. C-channels are typically used for voice
communications.
CM
Configuration Module
CMU
Communications Management Unit
CNS
Communication Navigation Surveillance
Dec 2003
113
Glossary
COM
Contraction Of Communication
DUN
Dial Up Network
FAX
Facsimile And Telefax
FMS
Flight Management System
GES
Ground Earth Station
GPS
Global Positioning System
H+
An Inmarsat aeronautic data and voice service
HGA
High Gain Antenna
HPA
High Power Amplifier
HSD
High Speed Data
HSU
High Speed Unit
ICAO
International Civil Aviation Organization
ID
Identification
IDD
International Direct Dialling
IMN
Inmarsat Mobile Number
Inmarsat
International Maritime Satellite Organisation
IOR
Indian Ocean Region
IP
Internet Protocol
114
Dec 2003
Glossary
IRS
Inertial Reference System
ISDN
Integrated Services Digital Network
ISN
Inmarsat Serial Number
ISP
Inmarsat Service Provider
LAN
Local Area Network
LCD
Liquid Crystal Display
LED
Light Emitting Diode
LES
Land Earth Station
MES
Mobile Earth Station
Modem
Modulate Demodulate
MPDS
Mobile Packet Data Se rvice
MSN
Multiple Subscriber Number
NCS
Network Co-ordination Station
PC
Personal Computer
P-channel
A channel which provides a uni-directional
dedicated communications channel from a
Ground Earth Station (GES) to all aircrafts. Data
packets are broadcast over this channel and
addressed to a specific aircraft.
PIN
Personal Identification Number
Dec 2003
115
Glossary
POR
Pacific Ocean Region
POTS
Plain Old Telephony System
PPPoE
Point-to-Point Protocol over Ethernet
PRT
The total system communications channel
including the P -channel, R-channel and Tchannel
R-channel
A channel which provides a uni-directional
dedicated communications channel from aircraft
to a GES. Access to this channel is contention
mode, with the timing signal (for the
transmission slots) being provided by the P Channel.
RF
Radio Frequency
SCPC
Single Carrier per Channel
SDM
System Definition Manual
SDU
Satellite Data Unit
SLCV
Field in the Cause codes
(Standard/Location/Class/Value)
STE
Secure Telephone Equipment
STU
Secure Telephone Unit
SW
Software
116
Dec 2003
Glossary
Swift64
An Inmarsat aeronautic High Speed Data
service
TA
Terminal Adapter
T-channel
A channel which provides a uni-directional
dedicated communications channel from aircraft
to a GES. T-Channels are used to convey
longer messages without the risk of conflict
that arises on the R-Channel. T-Channels are
allocated by a GES following a request received
over the R-Channel.
TCP/IP
Transmission Control Protocol/Internet Protocol
TNID
Terrestrial Network ID
UDI
Unrestricted Digital Information
USB
Universal Serial Bus
WAN
Wide Area Network
Webcam
Web Camera
WLAN
Wireless Local Area Network
Dec 2003
117
Glossary
This page is intentionally left blank
118
Dec 2003
Index
Index
2 nd functions ....................... 28
3.1 kHz audio ............... 12, 14
56 kbit/s ............................. 12
DATA................................ 14
64 kbit/s ....................... 12, 89
UDI.................................. 14
Abbreviations ................... 113
Active error......................... 88
AHRS active ........................ 86
Alpha mode ........................ 30
Alpha-Numeric buttons ....... 29
Altitude............................... 86
Antenna position ................ 87
Auxiliary Cradle .................. 20
Auxiliary Handset ............... 20
BITE error codes............... 104
Booting............................... 37
Call
Conference ...................... 47
From 2.4 GHz Cordless
phone........................... 54
From auxiliary handset.... 48
From Full Feature handset43
From phone book ............ 44
From POTS handset......... 48
From Sigma 7 phone ......... 53
Internal ........................... 45
Quick dial......................... 44
To the terminal................ 57
Using ISDN ...................... 55
Call transfer
Auxiliary handset............. 52
Full Feature handset ....... 46
Dec 2003
Caps toggle ........................29
Cause codes .....................105
List of.............................106
CDM ....................................17
Change pin code.................79
Channels
signal strength ................86
ComfortNoise ......................64
Commission ........................13
Components of Aero -HSD+.17
Conference call ...................47
Configuration ......................80
Contrast .............................62
Data....................................12
Detailed navigation.............87
Dial-Up networking ...........102
Disable pin code .................79
Disclose position .................75
Display symbols ..................24
Documentation
Related ..............................9
Doppler velocity ..................87
Email...................................89
Error
View active ......................88
Error codes .......................104
BITE ...............................104
Cause codes ..................105
List of.............................106
Fault
View active ......................88
Fax......................................12
3.1 kHz audio...................56
119
Index
H+ ...................................55
HSD .................................56
ISDN ................................56
Fax setup ...........................75
Features of Aero -HSD+.......16
File transfer ........................89
Full Feature Cradle .............20
Full Feature Handset ....20, 21
Function buttons ................25
Geo-stationary ...................11
GES.....................................12
List of known...................82
List of preferred...............70
Glossary ...........................113
GPS active ..........................86
H+ ......................................11
Handset type......................82
HandsetSetup ....................60
Heading ..............................87
HPA.....................................19
ICAO address .....................87
Inmarsat.............................11
Internal calls.......................45
International access codes.57
Internet Explorer..............102
IP/LAN ................................89
IRS active ...........................86
ISDN ...................................89
Hardware setup ..............91
Phone call ........................55
Setup of connection.........96
ISN .....................................87
Key beep ............................63
Lattitude.............................86
LCD.....................................22
LEDs ...................................23
LES .....................................12
120
List of known .................. 83
List of preferred, ISDN .... 71
List of preferred, MPDS ... 72
Light in handset................. 62
Lock System....................... 65
Logoff................................. 67
Logon................................. 66
Automatic........................ 67
Custom ........................... 67
Manual ............................ 67
Policy............................... 70
Renew............................. 67
Settings .......................... 68
Longitude........................... 86
Manuals
Other ................................ 9
Memory
Auxiliary handset ............ 49
Menu
Accessing ........................ 41
Entering selected ............ 41
Exiting............................. 41
Overview....................... 111
Scrolling through............. 41
Shortcuts ........................ 41
Tree .............................. 111
Modem
H+ setup ....................... 100
MPDS...................... 12, 14, 89
Hardware setup .............. 90
Setup using Ethernet and
PPPoE .......................... 92
Windows 2000 and PPPoE93
Windows XP and PPPoE .. 92
Navigation
Data ................................ 86
Show detailed ................. 87
Dec 2003
Index
Source ............................. 86
NCS .................................... 11
Normal User ................. 39, 41
Outlook Express ............... 102
Packet Data Channel.......... 14
Phone book........................ 58
Delete entry .................... 59
Dial from.......................... 59
Edit entry ........................ 59
Insert new entry ............. 59
Making a call.................... 44
Phone volume .................... 64
Pin codes
Changing......................... 79
Types .............................. 39
Pin setup ............................ 79
Pitch ................................... 87
POTS phone ....................... 48
Prefix.................................. 43
Quick dial............................ 78
Delete entry .................... 78
Edit entry ........................ 78
Making a call.................... 44
Recalling a stored number
Auxiliary handset............. 51
Redial
Auxiliary handset............. 52
Full Feature handset ....... 44
Ring profile
Defining........................... 76
Selecting ......................... 65
Ring tone
All handsets .................... 63
Broadcast call .................. 63
Current handset.............. 63
Direct call......................... 63
Dec 2003
Ring volume ........................63
Ringmode
Defining ...........................76
Selecting ..........................65
Roll......................................87
Router
Hardware setup...............91
Setup .............................100
Satellites.............................11
List of...............................83
SDU.....................................19
Serial number ..................87
Service Provider..................41
Services ..............................14
Signal strength ...................86
Silent function.....................62
Software version ................88
Applicable ..........................8
Special characters...............29
Speech..........................12, 14
Speed .................................86
Spot-beams ........................11
Status .................................84
Storing a phone number
Auxiliary handset .............49
Super User....................39, 41
SW version .........................88
Swift64 ...............................11
System components ...........17
System setup......................73
Transferring a call
Auxiliary handset .............52
Full Feature handset........46
Troubleshooting................103
Voice ...................................12
Web b rowsing ....................89
121

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:12:12 15:30:25Z
Modify Date                     : 2003:12:12 15:55:53+01:00
Page Count                      : 121
Creation Date                   : 2003:12:12 15:30:25Z
Author                          : CC
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Mod Date                        : 2003:12:12 15:55:53+01:00
Metadata Date                   : 2003:12:12 15:55:53+01:00
Title                           : AeroHSD+ User Manual 98-119959-a18.doc
Creator                         : CC

EXIF Metadata provided by EXIF.tools