Topcon America 100926 DIG UHF-II Radio Module User Manual COMPREHENSIVE INSTALLATION INSTRUCTIONS

Download:
Mirror Download [FCC.gov]
Document ID	1733905
Application ID	bdt7mQ2VQm7X+i2zuFK+2A==
Document Description	COMPREHENSIVE INSTALLATION INSTRUCTIONS
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.97kB (399663 bits)
Date Submitted	2012-06-29 00:00:00
Date Available	2012-06-29 00:00:00
Creation Date	2012-06-25 11:18:34
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2012-06-25 11:18:34
Document Title	COMPREHENSIVE INSTALLATION INSTRUCTIONS
Document Creator	Microsoft® Office Word 2007
Document Author:	Sharon Sinclair

DIGITAL UHF II INSTALLATION INSTRUCTION IN HOST UNITS
Step
Drawing
Action & Tools
Preparations:
a) Modem PCB (qty 1, part number depend
on the work order)
b) BNC, TNC, or Antenna-J connector cable
( qty 1, part number or type of cable
depends on work order)
c) Screws CR 3X6, qty 4
d) Niji lock red
e) Torque driver 6 in lbs
f) Brady barcode printer and scanner
g) Lower case assembly 5
a) Tools: Socket drive handle, 16 mm
socket.
Obtain BNC, TNC, or antenna-J.
Cable installation (BNC-TNC):
1. Remove the washer and the nut from the
cable.
2. Install cable into the lower case assembly
3. Install washer and nut back to the cable
4. Use tools to tighten the nut
Symbol
© Topcon Positioning Systems, Inc.
TPS LIVERMORE CA
Nut
Washer
Coanical spring washer
Label 2
Antenna-J installation:
O-ring
Antenna-J
1. Obtain antenna (include in antenna: nut,
rubber o-ring and washer), coanical
spring washer (700351038X)
2. Install antenna.
Step
Drawing
Action & Tools
Obtain modem PCB and scan barcode (red
circle) using the Brady scanner. Obtain
barcode label from the Brady printer and
install label into the battery compartment
located at the lower case.
Symbol
© Topcon Positioning Systems, Inc.
TPS LIVERMORE CA
Install TNC or BNC cable to the modem.
When connector was installed correctly, a
click noise will occurs.
Install the modem board to the junction PCB
(red circle) connector and route the cable
underneath the modem board as shown in
the image to the left.
Install modem board to the lower case
assembly with 4 screws (CR 3X6) and niji lock
red (6 in lbs).
Topcon Positioning Systems:
Ferdinand Riodique
Compliance Engineer
7400 National Drive
Livermore CA USA, 94550

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Sharon Sinclair
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2012:06:25 11:18:34
Modify Date                     : 2012:06:25 11:18:34
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools