Tunstall Healthcare 4100426 Wireless Keypad 41004/26 User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1138542
Application ID	tvd6et1pGEs9SdoW+MBnEA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.96kB (124505 bits)
Date Submitted	2009-07-15 00:00:00
Date Available	2009-07-15 00:00:00
Creation Date	2009-07-09 15:36:09
Producing Software	GPL Ghostscript 8.61
Document Lastmod	2009-07-09 15:36:09
Document Title	Microsoft Word - D4107132A_Wireless_Keypad_User_Guide.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	rj_smith

Wireless Keypad User Guide
On each key press, the keypad will beep and the Green LED will blink.
When a correct sequence is keyed in, the keypad will chirp and flash
the green LED.
Arming or Disarming the Intruder monitoring feature
To arm both zones 1 and 2, enter your 4 digit Security
PIN and then press
To arm Zone 1 only (partial arm), enter your 4 digit
Security PIN and then press
To disarm the feature, enter your 4 digit Security PIN
and then press
Panic Alarm
To activate a Panic or Bogus caller alarm, press and
hold the “SOS” button for 2 seconds.
Indicating Caregiver arrived
To indicate Caregiver Arrived, the caregiver should enter
the 4 digit caregiver PIN and then press
Assigning a new PIN A new keypad will have the following default PIN
numbers:
Security PIN ‘0000’
Caregiver PIN ‘0000’
To assign a new Security PIN, press and hold “S”.
Press 1 then enter your existing 4 digit PIN. Enter a new
4 digit PIN then release “S” after the keypad beeps
To assign a Caregiver PIN, press and hold “S”.
Press 2 then enter the existing 4 digit PIN. Enter a new 4
digit PIN then release “S” after the keypad beeps
D4107132A
© Tunstall
Cleaning and maintenance
Dust the Keypad with a soft cloth which can be moistened with a gentle
detergent if required. Ensure no moisture goes behind the keypad.
Battery Information
Typical battery life is 5 years. Your keypad will self report a low battery
condition to your monitoring service.
The replacement battery type is a 3 volt Lithium battery, number
CR123A. The battery and fitting instructions can be obtained from your
monitoring service.
FCC Notice
Wireless Keypad (Part Number 41004/26)
FCCID: G2X-4100426
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment
Supplier Contact:
D4107132A
© Tunstall

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.61
Create Date                     : 2009:07:09 15:36:09+01:00
Modify Date                     : 2009:07:09 15:36:09+01:00
Title                           : Microsoft Word - D4107132A_Wireless_Keypad_User_Guide.doc
Creator                         : PScript5.dll Version 5.2
Author                          : rj_smith

EXIF Metadata provided by EXIF.tools