Ubiquiti LBE5ACG2 LBE-5AC-Gen2, LBE-5AC-Omni-Gen2 User Manual LiteBeam LBE 5AC Gen2 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3312337
Application ID	JCDejHfgqHAypw0zwIMFOA==
Document Description	Quick Start Guide_Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	489.54kB (6119216 bits)
Date Submitted	2017-03-10 00:00:00
Date Available	2017-04-24 00:00:00
Creation Date	2017-03-10 08:19:06
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-10 08:19:11
Document Title	LiteBeam® LBE-5AC-Gen2 Quick Start Guide
Document Creator	Adobe InDesign CC 2015 (Macintosh)
Document Author:	Aaron Jacoby

Hardware Installation
The LiteBeam AC was designed for outdoor use and quick
mounting on a pole.
1. Assemble the antenna reflector by attaching the
Side Reflector Panels to the Center Reflector Panel:
a. Insert the heads of the two mounting studs on the
Center Reflector Panel into the large opening of the
slotted holes of the Side Reflector Panel.
b. Slide the Side Reflector Panel down until the top edges
of the panels align. The Side Reflector Panel is captured
when both heads of the mounting studs are positioned
over the narrow opening of the slotted holes.
c. Repeat the assembly for the other Side Reflector Panel.
2. Hold the reflector assembly by hand (do not use a tabletop
or flat surface) and insert the Feed Receiver into the
reflector assembly to secure the panels:
a. Align the arrows on the Center Reflector Panel and the
Feed Receiver, and insert both edges of the Side Reflector
Panels and Center Reflector Panels into the Securing Arms
of the Feed Receiver.
b. Insert the Feed Receiver into the Center Reflector Panel by
pressing the top and bottom snap hooks into the slots
of the Center Reflector Panel.
WARNING: Do not install the Feed Receiver into the
reflector assembly by pushing down onto a tabletop or
other flat surface as this can deform the panels. Hold the
reflector assembly by hand.
c. For additional support, there are eight machine screws
that secure the Side Reflector Panels to the antenna
assembly.
3. Insert the Antenna Feed into the Feed Receiver until the feed
locks into place.
4. Turn the Port Cover counterclockwise to reveal the
Ethernet Port on the Antenna Feed.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Aaron Jacoby
Create Date                     : 2017:03:10 08:19:06-07:00
Modify Date                     : 2017:03:10 08:19:11-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2017:03:10 08:19:11-07:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Format                          : application/pdf
Title                           : LiteBeam® LBE-5AC-Gen2 Quick Start Guide
Creator                         : Aaron Jacoby
Document ID                     : uuid:49ae5bbc-6728-494d-bd06-31ecf02cd4bf
Instance ID                     : uuid:f1f48334-8a74-49d1-8834-5ebe0fa08f71
Producer                        : Adobe PDF Library 15.0
Page Count                      : 4

EXIF Metadata provided by EXIF.tools