Uniform HE7620 802.11n 20HT WIFI modular User Manual

Uniform Industrial Corp. 802.11n 20HT WIFI modular Users Manual

Use manual Rev. 1

Download: Uniform HE7620 802.11n 20HT WIFI modular User Manual
Mirror Download [FCC.gov]Uniform HE7620 802.11n 20HT WIFI modular User Manual
Document ID2637139
Application IDWhYd4vcTFSAphYYHcqh9uA==
Document DescriptionUse manual Rev. 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.78kB (359702 bits)
Date Submitted2015-06-05 00:00:00
Date Available2015-06-05 00:00:00
Creation Date2015-05-21 14:41:30
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-06-02 09:03:39
Document TitleUsers Manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: A5CCC452ACC3

Modification History
Date
Revision
0.1
2014/10/15
Editor
Comment
Wi-Fi module Specification
Product Name
Wi-Fi module
Model Number
Home Extender Family
Host interface
Wifi, Fast Ethernet ,USB, I2c,SPI,UART
Band
2.4G ISM
Channels
USA and Canada: ch1~ch11
82.11 n 20HT
Wireless Standard
LAN
TX power(high gain) 802.11n:17~19dbm
RX sensitivity
Antenna gain
802.11n:-61dbm
5dbi
Wire LAN
Fast Ethernet(10/100M) x2
Led indicator
Wireless x1, Ethernet x2, power x1
Input power
DC5V/2.1A
Power consumption
<15W
Operating Temp:-10~60℃
Storage Temp:-10~65℃
Temperature Range
Humidity
Operation Humidity: 10~90% Non-condensing
PCB Dimension
70x57.66mm
Regulatory compliance
FCC
Detail description
1 Description
802.11n 20HT Wi-Fi Board, High Power High Gain
2 System
CPU : 580 MHz MIPS® 24K™ CPU core / MT7620A
Flash : 16MB
DDR2 : 64MB
RTC : NO
RF : 1T1R,802.11n 20HT,High power
Ethernet : 10/100Mbps Fast ethernet
3 Function
3.0 Function Block
3.1 Wi‐Fi spec
Compliance IEEE802.11n 20HT
3.2 Ethernet
Compliance IEEE802.3u
3.4 USB
Support USB2.0 host
3.5 I2c
Support standard speed (100kbps)
3.6 SPI
3.7 UART
Compatible with RS232
4
HW interface
Interface
MT7620A
Connector
Function
Pin
Wi‐Fi
SMA
N/A
N/A
Ethernet port 0
RJ45
MDI_TN_P0
MDI_TP_P0
MDI_RN_P0
MDI_RP_P0
U17
U16
T15
U15
Ethernet port 4
RJ45
MDI_RP_P0
MDI_TP_P4
MDI_RN_P4
MDI_RN_P4
M17
M16
N17
N16
USB
Mini USB
UPHY0_PADM
UPHY0_PADP
C16
C17
UART0
Pin header 1x4
TXD
RXD
R12
P12
UART1
Pin header 1x4
TXD2
RXD2
P13
P14
I2C
Pin header 1x6
I2C_SCLK
I2C_SD
U14
T14
SPI
Pin header 1x6
SPI_CS0
SPI_CLK
SPI_MOSI
SPI_MISO
SPI_CS1
C7
D8
A8
C8
C9
Reset Button
Tack switch
ND_D0
P8
Power Jack
Mini DC Jack
N/A
N/A
GPIO
Test point
ND_D3
ND_D4
U10
T9
5 PCB Placement
Warning:
This device must be professionally installed. The intended use is generally not
for the general public. It is generally for industry/commercial use. Installers
must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for
he FCC compliance requirement of the end product which integrates this module.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to also be informed that any
changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment. If the size of the end product is smaller
than 8x10cm, then additional FCC part 15.19 statement is required to be available in
the users manual: This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
TX FCC ID: TFJHE7620. If the size of the end product is larger than 8x10cm, then the
following FCC part 15.19 statement has to also be available on the label: This device
complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause
undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : 
Create Date                     : 2015:05:21 14:41:30+08:00
Modify Date                     : 2015:06:02 09:03:39+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:06:02 09:03:39+08:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20A8CFA5CEBBA1A9FAAED1>
Creator                         : 
Document ID                     : uuid:4db843fb-7ca7-4436-9728-1a35967a5962
Instance ID                     : uuid:843617e3-ad63-43a5-a0aa-4adad8055483
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TFJHE7620

Navigation menu