Venture Global HAXPFAT Multi-Functional Alarm Transmitter User Manual 2
Venture Global Limited Multi-Functional Alarm Transmitter 2
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2679413 |
| Application ID | 8i2WSH3ZKpLcoQoiPHC3lQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 40.82kB (510211 bits) |
| Date Submitted | 2015-07-14 00:00:00 |
| Date Available | 2015-07-14 00:00:00 |
| Creation Date | 2015-07-06 09:43:31 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2015-07-06 09:43:31 |
| Document Title | 無標題-2 |
| Document Creator | CorelDRAW X6 |
| Document Author: | wwliu |
USER MANUAL HAX-300-500 Setting Slide the switches inside the battery cover for your needs. 1. Power Switch to off position when do not use this device. 2. Transmitter On/Off switch On : Send a trigger signal to receiver when triggered Off : Do not send signal to receiver when triggered. 3. Sound selector Select the suitable sound by slide this switch to or position.. 4. Light On/Off Turn the flash light on or off by slide this switch. 5. Mode Mat (Fall mat): This mode for fall mat or entry mat. The unit triggered when someone step on the mat. EXIT Parts and Function 13 Mode Mat Pad +3S II 14 10 11 Mode Mat Pad +3S 15 16 II 12 18 17 1. Batteries compartment 2. Battery Door 3. Regenerates new code button. 4. Power on/off switch 5. Transmitter On/off switch. 6. Alert sound selector. 7. Light on/off switch. 8. Volume control. 9. Mode control. 10. Sensor input jack 11. Anti-take off Cover 12 Cover lock 13 Flasher 14. Speaker 15 LED indicator. 16. Test /Reset button 17. External DC jack 18. Nurse call button jack. Pad (Bed Pad): This mode for seat pad or bed pad. The unit triggered when Patients or elderly leave the pad. Power ReCode PWR On Off On Off SND Or AAA AAA AAA TX Using a 5V/ 300mA AC/DC adaptor LIGHT On Off Mode NO NC 3S Sound Mode Mode Hi Lo Off Mat Pad +3S II Mat Pad +3S II Pad +3S (Pad & 3 seconds delay): Same as Pad mode but delay 3 seconds for reduce False alarms. 6. Volume control You can select High II / Low I / No sound by slide this switch. 7 Regenerate a new code R If the RF code is conflict, press the button in the pin hole to regenerate a new code Pairing with receiver Remove the screw and slide to open the battery cover Flip to open the cover Insert 3 AAA bateries to the battery compartment and close the battery cover 5V AC/DC adaptor (Switching mode) Installation Chair Pad plug Velcro Nurse Call Button Chair Pad Unlock lock Unlock and slide out the cover to install the plug This unit can work stand alone or work with the wireless receiver. If work with the receiver, you need to pairing with the receiver follow to the manual of the receiver. Operation Mat mode The sensor unit will be triggered when someone step on the mat. Pad mode when the person lying (sitting) on the sensor pad. The sensor unit will generate a beep tone to confirm the pad is function. The unit will be triggered when Patients or elderly leave the pad sensor. Alarm will stop when the person return to the pad or press the stop button. Delay Mode Functions are same as Pad mode, but delay 3 seconds after triggered for reduce False alarms. Nurse call Press the nurse button once (the big nurse call button must be plug in), the sensor unit will be send a trigger signal to receiver, and sensor unit will generate beep tone to indicate this button is pressed. Test & Reset - Test: Press the test/Reset button once, The unit will generate a beep tone, LED will blink and will send a RF to the receiver (It will depend on the function switch setting) - Reset: When the alarm is triggered, press the test/Reset thrice within 2 seconds will stop FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 Create Date : 2015:07:06 09:43:31+08:00 Modify Date : 2015:07:06 09:43:31+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : wwliu Creator : CorelDRAW X6 Title : 無標題-2EXIF Metadata provided by EXIF.tools