ViaSat AT2220 Fixed L-Band satellite modem with WLAN and Bluetooth User Manual Explorer122 QSG Cobham v7x
ViaSat, Inc. Fixed L-Band satellite modem with WLAN and Bluetooth Explorer122 QSG Cobham v7x
ViaSat >
Contents
- 1. User Manual
- 2. User Manual I
- 3. User Manual II
User Manual I
EXPLORER 122 Quick Start Guide EXPLORER 122 Terminal Quick Start Guide Document number: 98-150579-A Release date: 29 April 2016 Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane A/S. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies. Manuals issued by Thrane & Thrane A/S are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. from www.cobham.com/satcom, Service and support, or from the distributor. Thrane & Thrane A/S is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source. In the event of any discrepancies, the English version shall be the governing text. Thrane & Thrane A/S is trading as Cobham SATCOM. Copyright © 2016 Thrane & Thrane A/S. All rights reserved. EXPLORER 122 Terminal Quick Start Guide FCC Regulatory Information Compliance Statement (Part 15.19) The enclosed hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by ViaSat could void the user’s authority to operate the equipment. Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Industry Canada (IC) Regulatory Information This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Class B Digital Device Notice EXPLORER 122 Terminal Quick Start Guide This Class B digital apparatus complies with Canadian ICES-003, RSS-Gen and RSS210. Cautions, and Notes Warnings, Cet appareil numérique de la classe B est conforme à la norme NMB-003, CNR-Gen Safety precautions or important information found in this document will normally et CNR-210 du Canada. be presented just prior to the point where the hazard is likely to be encountered. Symbols used to identify the information are defined as follows: WARNING: A Warning is an operation or maintenance procedure that, if not obeyed, can cause injury or death. CAUTION: A Caution is an operation or maintenance procedure that, if not obeyed, can cause damage to the equipment. NOTE: A Note gives information to help the reader. General Safety Precautions General safety precautions are as follows: 98-150579-A WARNING: There are no user-serviceable parts inside the terminal. The terminal should only be opened by a technician that EXPLORER 122 Terminal Quick Start Guide Contents User Manual ....................................................................................................... 6 Warranty ............................................................................................................. 6 Serviceable Parts ............................................................................................... 6 Customer Support ............................................................................................. 6 Your EXPLORER 122 Terminal ......................................................................... 7 Unpacking the Terminal ................................................................................... 7 Required Tools/Equipment .............................................................................. 8 Quick Overview .................................................................................................. 8 Connecting to the Terminal ............................................................................ 9 Setting up a Wired Interface ...................................................................... 9 Setting up a Wireless Interface ............................................................... 10 Connecting to the Web Interface............................................................ 10 EXPLORER 122 Terminal Quick Start Guide User Manual The Quick Start Guide provides a quick introduction to the basics of the EXPLORER 122. For more detailed instructions and information please refer to the EXPLORER 122 User Manual which can be found at: http://www.cobham.com/satcom, select Service and Support > Cobham SATCOM Service and Support > 24-7 Self Service Center / Technical Downloads. Warranty For warranty information and repairs, please contact your service provider. Serviceable Parts The EXPLORER 122 terminal contains no user-serviceable parts. 98-150579-A Customer Support Should your Cobham SATCOM product fail, please contact your dealer or installer, EXPLORER 122 Terminal Quick Start Guide Your EXPLORER 122 Terminal This quick start guide contains the basic information about getting your EXPLORER 122 Terminal up and running. EXPLORER 122 Terminal Quick Start Guide Installing the Terminal Refer to the EXPLORER 122 User Manual for detailed installation instructions. EXPLORER 122 Terminal Required Tools/Equipment To get started, the following items are required: Unpacking the Terminal 1. Pre-assembled EXPLORER cable and inspect for shipping damage. Contact Unpack the box, inventory the122 contents, 2. yourMagnetic retailer inmounts case of missing contents or noticeable defects. Your package should contain: • EXPLORER 122 Terminal Quick Overview • Mating Connector (assembly required) Installation location on the vehicle should provide the terminal with an unobstructed line-of-sight to the satellite. Terminal should be securely fastened to the vehicle using either magnetic mounting hardware or permanent mounting hardware. Mounting system will vary based on installation requirements. Recommended terminal locations and mounting methods are outlined98-150579-A in the EXPLORER 122 User Manual. WARNING: Terminal antenna should be kept at least 44 cm from direct exposure to humans. EXPLORER 122 Terminal Quick Start Guide Connecting to the Terminal Setting up a Wired Interface The EXPLORER 122 Terminal offers the following wired interfaces via a multi-pin circular connector: View of EXPLORER 122 Terminal Connector Manufacturer Terminal Connector Part Number Chogori 23305515-02 EXPLORER 122 Terminal Quick Start Guide Pin Signal Name Setting Number up a Wireless Interface Cable Connector Part Number 23305211-03 Description 1 your WLAN-enabled VIN to +30 VDC Power To connect device+10 to the EXPLORER 122 Terminal: 1. Make feature on your device is turned 2 sure that WLAN IGNITION Ignition Sense Line on and place it near the terminal. VIN RTN Power Return 2. On your device, search for available WLAN networks. RX+ Ethernet where RX (+)should be replaced 3. The1S default SSID ETH will be vmt_ _base with2Sthe fixed terminal identifier unique to your terminal. ETH RXEthernet RX (-) a. Check the label on the terminal enclosure to obtain the FTI. 3S the SSID ofETH TX+ Ethernet TX (+) 4. Select your terminal network when it appears on the list. Drain is Wire 5. The4S default password terminal. Ethernet Shield 6. The5S encryption type WPA2. ETHisTXEthernet TX (-) Connecting to theA Web Interface Refer to Appendix in the EXPLORER 122 User Manual for detailed cable instructions. The EXPLORER 122 contains a web interface for basic configuration and status. To access the web interface: 1. On your PC, enable DHCP on the networking device. 2. Use the latest released version of the Google Chrome™ browser. 98-150579-A 3. To access the web interface: a. Via the wired interface, enter http://192.168.100.1/ into the address bar. b. Via the wireless interface, enter http://192.168.200.1/ into the address bar. EXPLORER 122 Terminal Quick Start Guide 11 98-150579-A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 7 PDF Version : 1.4 Title : Microsoft Word - Explorer122_QSG-Cobham_v7.docx Producer : Mac OS X 10.11.4 Quartz PDFContext Creator : Word Create Date : 2016:05:09 23:46:31Z Modify Date : 2016:05:09 23:46:31ZEXIF Metadata provided by EXIF.tools