WERMA Signaltechnik KG WIN1 Tranceiver User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	2605652
Application ID	BODTHJf/fT8bGApA1W+uiQ==
Document Description	User Manual-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	481.16kB (6014511 bits)
Date Submitted	2015-05-06 00:00:00
Date Available	2015-05-07 00:00:00
Creation Date	2015-05-06 21:50:26
Producing Software	GPL Ghostscript 8.71
Document Lastmod	2015-05-06 21:50:26
Document Title	Annex no. 5 (Functional Description - User Manual).pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	acer

WEHMA
SIGNALTECHNiK
5. Activation
5.1 Activation of the WIN starter packages
WiN starter packages are:
WiN complete KombiSIGN 7i
WiN system KombiSiGN 70
WW system KombiSiGN 71
WW complete with WIN transmitter performance KombiSiGN 7]
WW system with WiN transmitter performance KombiSlGN 70
WW system with WiN transmitter performance KombiStGN 7i
To activate the WW starter packages proceed as foliows:
i .
Start up your PC and start the WIN sottware.
2. The toilowing window appears. Confirm by ciicking “Next".
'0» mm... fl‘
CWMMMmm-mdmmm
Thl! assmam will m and: you Md- lb: Imfllaban of the basic kit
(WiN :yshn lwlN martian)
‘3’”O
860640.06
860840.04
860640.04
860.640.i 6
860.840. i 4
860.640. i 4
Version 4.0.0 - 0115
41
3‘ Connect the WIN receiver to your PC using the USB cobie provided CIick “Search" to
search for the connected WIN receiver.
rag Amman" “V
hmhwm
Huemadflawlebbzwnfiwed
anddidumsumh
#-
Colfigurabte WIN rwavas
Mmaamh (a
E: w 2:.
Note: If the WIN receiver is not recognized as hardware, pIease install the driver monudIIyi MdnudI
driver instoIIation is described in chapter 3.
A. The WIN receiver has been detected. CIick “OK" to proceed with the configuration
rag Amman" “V
hmhwm
Huemadflawlebbzwnfiwed
anddidumsumh
#-
Caflgurabte WIN rwavas
NeleNrsemvermm
42
WEHMA
SIGNALTECHNIK
5. You can how mount the three WIN transmitters, which are included with the WIN system or
WIN complele kits on your signal towers. These three WIN lransmillers are pie-configured, i.e.
conneclion to lhe WIN receiver has already been established.
r(Ill) Anivation g‘
wmn®
hicfilmlmumlvnumd‘dI—h—u-m—flynfinl
nuam.mmmamnmmmmmmmcmmm
mgflmus
WywwammiddthIvaflhlflBew-mmh
hammifluhmvifimauumlubealdm
we
If you want 10 add further WIN lransmiller, you can do lhis atler aclivalioh of the WIN
system/complete,
Nole: Aclivation at additional, WIN lransmitters, which are nol preicontigured and additional WIN
receiver, is described in chapter 5,2
Version 4.0.0 - 0115
43
5.2 Activation of the additional WIN components
Additional WIN components are:
- WiN transmitter KombiSIGN 71 860640.05
- WIN transmitter performance KombiSlGN 7l 860.640.I 5
- WIN transmitter control KombiS/GN 71 86064025
o WIN transmitter KombiSIGN 70 860840.05
- WIN transmitter performance KombiS/GN 70 860840.15
- WIN transmitter control KombiS/GN 70 86084025
I WIN receiver 860000.01
5.2.1 WIN transmitter
Note: the three WIN transmitters included in the WIN system or WIN complete kits are pre
configured.
if you want to use more than three WIN transmitters, configuration is carried out as follows:
I. Start the WIN software.
2. Connect the WIN transmitter to your PC using the USB cable.
WEHMA
SIGNALTECHNlK
3‘ The following box appears on the screen:
Click “Search“ lo search for the connecled WIN lransmilleri Once it has been found, click
"Nexi".
(ID Walk)"
Wmhmflm
Plugwmflgwmmmflulobgwnfigmod
anddidmnSumh
EV
4‘ Configure your WlN transmitter and assign it lo a WIN receiver.
(m Anintim
Myanmar-is
Hm-dfiifl-Wmdwigflmmmmhmmfl
d-wipfiari til-W [in
Mm wmmmmlmms
Mac-ID mus
Asslmmdenoemnammwrm 1m.
maimmmnmhwsmnmmmmw
us-
um”
Version 4.00 - 0115
45
5‘ if severai WiN transmitter need to be configured, seiect "Configure a WiN transmittal” and
stick "Next“r Repeat the process from step 3 onwards,
'(w m ‘ u‘
Wald
Whmlmflww YWmmr-mlinMN
Mumflmlihu
Mudflywwi‘bmfim?
if you want to configure a receiver, select "Configure a receiver", see chapter 52.4
it you want to finish a configuration, seiect "Finish configuration".
To confirm your seiection ciick “Next".
6. Disconnect the USB connection to the WW transmitter,
7‘ The WiN transmitter can now be integrated into the signal towers. (Refer to chapter Fehlerl
Verweisquelle konn'e nicht gelunden werden.)
WEHMA
SIGNALTECHNIK
5.2.2 WIN transmitter peflormance
Note: The three WIN transmitter performances included in the WIN system performance or WIN
complete performance kits are preiconfigured.
If you want to use more than three WIN transmitters performance, configuration is carried out as
follows:
I. Stan the WIN software.
2. Connect the WIN transmitter performance to your PC using the USB cable.
3. The following box appears on the screen:
Click "Search" to search for the connected WIN transmitter performances Once it has been
found, click "Next“l
r(11) Walla" “V
C-nI-dIDnWII m
Hue mum me WIN nansmmar m be ounfigwu‘l
and ddK an Search
Connected WIN "mama
ININ lav: mm 00012735 (Wu 1%,
Version 4.00 - 0115 47
4‘ Configure your WlN transmitter performance and assign it to 0 WIN receiver,
in addition, configure the counter input to the tier on which the count impulse is applied.
'qm Aninfim -‘
Wylie-Em”
Hm-wfinwfiolimdmigflmbysdmfinghmhnmd
d-wipfiwidI-Wi-I
Nun: wrung-namnmezfi Mac-n) «new
Swim-var mm
Exam-mum
Cantu-um
5. it several WIN transmitters' performance needs to be configured, select "Configure a WlN
transmitter” and click "Next". Repeat the process from step 3 onwards.
'au mm ‘ n‘
Cm“
Wmmgmflhwflwmmmmlhem"
Mwmnmm,
Houdnymmbmm?
s 4
if you wont to configure a receiver, select "Configure a receiver", see Chapter 02.4.
WEHMA
SIGNALTECHNiK
if you want to finish a configuration, seieci "Finish configuration“.
To confirm your seieciion ciick “Next".
6. Disconneci The USB conneciion io ine WIN iransmiiier performance.
7. The WiN iransmiiier performance can now be fined inio ihe signai lowers. [Refer io chapter
Fehler! Verweisquelle konnte nich' gefunden weldenr)
Version 4.0.0 - 0115 4‘7
5.2.3 WIN transmitter control
it Start the WIN software,
2. Connect the WIN transmitter to your PC using the USB cable
3‘ The following box appears on the screen:
Click “Search“ to search for the connected WIN transmitter control Once it has been found,
click "Next".
(I) Activation
wtt- mum
Ho-cmleNlm-mlobecmm
mdfidrmsadr
a]?
mad WIN rm
Wm imcml new rm .0
a...
50
WEHMA
SIGNALTECHNlK
4‘ Configure your WlN transmitter control and assign it to 0 WIN receiver,
a) Actlvatlon
magnum
Mmmmfimdmwdmhmmemm
dewm
n... mummmi mun 45586]
591mm mm
D Selma-naming
0mm mar/Hm
AM: 7.; v lam v
saw v.3 v .m v
2.1.5 v.12 v .vslw v
in! 1,1 v .Gm v
wnmnohrmwmmw 1 v
Bldduq NeltheddilalhszNw-Iiuflbemd
l-h' “Si...
5. Configure the switch status of WIN transmitter control by defining the individual tiers. You
can choose between “Off", “On" or “Blinking",
all) Amvation
Can-figu- mm m
Mmhmm nnrawmmmmd
Note: The switched condition is activated as seen as the WIN transmitter control is energized,
Version 4.00 - 0115 51
6‘ Configure the switch conditions of the WIN transmitter controi‘ Vou can choose between
the standard (defauit) “Activate oniy the signal tower" and ”Initiate additionai pins 2 to 5".
mo Mivation
Wani-Ihww WIN
mmaammm
MACE)
h. _
11-qu -> W,
Note: See safety instructions in chapter 13.
7‘ Confirm your seiection with "Next".
at: Mivation
anion—ammu-
Mmmhwfllmmflwfinmflm
max-hm”
"-5 DMWWIWW
m4 ©bugmm2m5
m3 Marianna-[mun
“Him-5m
"'2 wwmmwwwlfl
mmdwmmmddema
mun
«mm
a...
‘1‘:
52
WEHMA
SIGNALTECHNIK
8‘ If several WIN transmitters need to be configured, select "Configure a WIN transmittel” and
cIick "Next“i Repeat the process from step 3 onwards.
(SID Anlvatlon
magnum—d
WWII-balm“ Vwmmmunmumw
«mum-m
mummmm7
g Magma.-
Q bignawlflm
LI Wawlflmllu
a... ....
9-: ‘a—
It you wont to configure a receiver, select "Configure a receiver', see chapter 52.4,
If you wont to finish a configuration, seIect "Finish configuration“.
To confirm your seiection cIick "Next".
9‘ Disconnect the USB connection to the WIN transmitter control.
10. The WIN transmitters can now be integrated into the signai towers, (Refer to chapter Fehler!
Verweisquelle konnte nicht gelunden warden.)
Version 4.00 - 0115 53
5.2.4 WIN receiver
Configure the new WIN receiver as follows:
i. Conneci 10 The existing daiabose on a network drive (see chapier 2.2).
2. Click "Activation" and proceed as described in chapter 8.1.
WIN - WERMA Sigmltthlz fimbH . (a. KG
WEHMA
SIGNALTECHNlK
6. Fitting - WIN transmitter / WIN transmitter performance / WIN
transmitter control
By means of the bayonet system, the WIN transmitter can be fitted as the lowest element of the
WERMA KombiSIGN 70 or KombiSIGN 71 signal tower. Ensure that the white markings of the
individual elements are aligned on top of each other. Turn the WW transmitter slightly until it clicks
on the terminal element [see following picture).
51>
Version 4.00 - 0115 55
7. Program functions
The WIN menu offers six different main modules:
. Control Station Module
. Productivity Module
. Runtime Module
. Job Module
- Control Module
- Routing Module
Additionally, Reporting and Data Export tunctions are available in the tollowing modules:
- Control Station Module
. Productivity Module
. Runtime Module
- Job Module
For a detailed description of the functions, refer to the relevant Module chapter (7.] to 7.4 as well
as 7.7)
56
WEHMA
SIGNALTECHNiK
7.1 Control Station Module
The Controi Station view shows the status of up to 50 machines and the jobs being worked on. You
can quickly see if a machine is in an error condition or running normaliy, This moduie helps you to
quickly take action to reduce downtime. You can see the performance progress of jobs on each
machine immediateiy. You can instail a layout of your workshop in the controi station View.
7.1.1 Control slalion depiction
7.1.1.1 WIN transmitter
The controi station depiction of 0 WW transmitter inciudes toliowing information:
i. WiN transmitter name
2. Status depiction
3. Edit WIN transmitter configuration
4. Set up the status change message
5. Set up the status transmission
Warninrl
an Mi Mi
Version 4.0.0 - 0115 57
7.1.1.2 WIN transmitter performance without running job
The controi station depiction of 0 WW transmitter performance without running Job inciudes
foliowing information:
i. WiN transmitter performance name
Status depiction
Edit WIN transmitter performance configuration
Set up the status Change message
Depiction “No running Job”
2.
5. Set up the status transmission
7 Edit new Job
Current quantity without target vaiue
001510
 3
l/—
58
WEHMA
SIGNALTECHNlK
7.1.1.3 WIN transmitter performance with running job
The control station depiction of 0 WW transmitter performance with running Job includes following
information:
i. WiN transmitter performance name
Status depiction
Edit WIN transmitter performance configuration
Set up the status change message
Set up the status transmission
Displays the running iob
Jump to Job Module
Current quantity
Tag‘NP‘EJ‘PPN
Fulfillment level of the job
i0. Mouse over function foriob details
ii. Job number
i2 Total quantity of the job
i3. Remaining quantity of the Job
i4. Remaining runtime of thejob
Version 4.0.0 - 0115 59
7.1.1.4 WIN transmitter control — manual control mode
The Control Station View of WlN transmitter control in manual control mode displays the following
information:
i. WlN transmitter control name
2. Display of the status within manual control mode, A description of the functions can be
found in chapter 7,l .4.
3. Edit WIN transmitter control configuration
4. Set up the status change message
5. Set up the status transmission
7.1.1.5 WIN transmitter control with delined switching rule
The Control Station View of WlN transmitter control in defined switching rule mode displays the
following information:
i. WlN transmitter control name
2. Display of the status within defined switching rule mode. A description of the functions can
be found in chapter 7.5.2.
3. Edit WIN transmitter control configuration
4. Set up the status change message
5. Set up the status transmission
60
WEHMA
SIGNALTECHNlK
7.1.2 Views into the control station
7.1.2.1 Control station main view
The Control Station moin view gives an overview of all WIN transmitters which have been
configured.
, 7 wwrwgmstgmmmsmw . :0. KG . [mm mun" . .uwrm....wmur — D n
41mm
W.
mm mmms 55-5561
E03, 11:: :WCWYMWDMIIMJ) [q 71. am
Win-nil
mm"; E K A E z )4
7.1.2.2 Further views
By opening up further views, specific groups of WW transmitter can be selected and displayed.
To configure onother view, proceed as follows:
t. Views can be opened by clicking the mouse on the relevant view number.
, 7 ww . wswugmrmmmw . (a, KG . [mum 3m.” rim 3] — n n
Version 4.0.0 - 0115 61
2‘ The names of the tndividuat views can be edited by rightrcttcking on the view icon‘
’0' Wm - WERMA StgmhechmkfimbH . Cm KG - [(unlvol mtlon- Wm 31 - D -
haewge
Ema-man \nng mans-nu- Sun».-
mum uh:
3‘ Confirm your entry with “OK‘Z
62
WEHMA
SIGNALTECHN‘K
7.1.2:! Adding :1 WIN transmitter to a View
1. By clicktng “Add WIN transmitter”, any number of WW tronsmttters can be added to the
setected View.
m w , WERMAStgnattahmkabH . Co, KG , [mum 3m.” 7v,“ a] — n n
2. Confirm your choice with "OK“.
0“) det WIN transmilkl
WIN harsnihu
WIN mm “3-02-53
WIN mum: NOS-BB
WIN mains m NOE-35
Version 4.0.0 - 0115 63
7.1.2.4 Selecting a background for a View
L To add or edit a background, c‘ick the “Se\e<:t background" button on the menu bars You
can define Images in 0H popu‘ar image formats (jpg, bmp, riff, ...) as a background for this
view.
ww , wemswmmamw . Co, KG , [Comm‘ mm 7v.“ a] — D n
2‘ A window opens where you choose "Se\ected image" and dick on to se‘ect the
background image,
mo Wmurfl image
Sauna
u-ahummhdwmumrwmr
:9 Mummy”:
1 Zmnm/mxnin
3‘ \n The foHowing window, you may se‘ect your background
me mm ”mm may: . g
QQ fin“, y mm, v ‘, g
‘ om- Mm” ,v 1 o
* mm, ‘ Pidures library
I nskwu mm “MW
8 Dmmbaxs
g. 25.". Puts ‘
Arrange“ may w
W...“
3 Mums
.n MK ”yum
E M1:
I mm
2! mums
!. Erasure)
_ mm. mm v
”.5". .\ v
64
WEHMA
SIGNALTECHNiK
4. You con oiso choose if you wont to zoom in or out of the image or insert it in its original size.
To select the desired image and add it as a background, stick "Open“. Ciick “Save“ to add
the background image to the view. A preview is displayed Viol the "Preview" button.
mo Bxhgrmmd image
saw-gs
Usa 1h: idloa‘ng backgrm Image Iw WM]
- Nobadxgmmimage
sew. ,.
Displayed Slle
- hke me Mgmal
Zoom om / 2mm in
Note: The desired image must be stored on your PC or a data drive connected to your PC, It you
wont to use the muitipie access function, the background image must be saved on a network
drive.
Version 4.0.0 - 0115 65
7.1.2.5 lie-positioning 0 WIN lransmitter icon
Every WIN transmitter can be repositioned, Simpty select the desired WtN transmitter on the menu
bar by tett cticktng and dragging to the desired position.
WW 7 mm stymnwtk 5th . co. K6 v [Control mm v .u w mnsmmml — D n
Wm wan
mm...
Em
van-nu
Oteratmnst
66
WEHMA
SIGNALTECHNiK
Example: A flooreplon of the production area has been used as 0 background. The WiN
transmitters have been pieced at the positions of their corresponding machines.
0 (mm rM.“ , a
,r m g
gun—J
Mums m6 “““““
I m-‘n
um ‘I
flat: I i
n- i
um r
rm wen u..—
Version 4.0.0 - 0115 67
7.1 .16 Full Screen Made
You can use the Full screen mode for OH views in the Controt Station and Productivity Modute‘ To
edit the Full screen mode, stick the "Fult screen" button on the menu bar. To Close the FUH screen
mode press the "esc" button.
ww , wemswmmamw . Co, KG , [Comvut mm 7v.“ a] — D n
I I’ICEDQO
Mmfidfigmhflw u.
68
WEHMA
SIGNALTECHNlK
7.1.3 Configuration WIN lra nsmiHer
7.1.3.1 Editing WIN lransmil‘ler
Evew WlN lrdnsmlller can be indivldudlly named and configured.
To configure 0 WIN lronsmiller, proceed as follows:
l. Selecl lhe WlN Transmiller lo be configured in one of your views.
2. Click lhe “Edil WlN lrdnsmiller" bullon.
(i) wwwgmslgmmmsmw . :0. KG . [mm mm . allWlensmlmlsl — D n
Wm vim 41 w
ninvilw ' mu.
9.3, 11:: fC-menuymmym) [q
Him 3
3. The WIN lransmiller configurollon menu will pop up.
all) wm mmquHKDnfigumfinn
Nana WIN mm max-Se
'mmlmmlb—wl
SAME-Mugging
Dualwill
m, «id-ruse)
am... a...
2nd nu wrung
um: mama
Ea?
Version 4.0.0 - 0115 6‘7
A. The home of the WIN transmitter can be matched to its intended use leg, CNC machine)
cm wm innsmma50ms| |>50msi
0V
| |>50ms| ‘>50ms‘
I I
I < 10 H: I
76
WEHMA
SIGNALTECHNlK
A Caution: The default setting for the counter input is tier 4, This can be changed to
another tier but the WIN transmitter performance must be connected to the
PC via the USB port. This new configuration is transmitted to the WIN
transmitter performance, Only after this step is the counter input of WlN
transmitter performance configured for the new tier.
Note: The impulse on the tier configured for the Job input must be applied for at least five seconds,
The first impulse starts the job, and the second impulse ends the job. if you have already created
another job with "active waiting", it can be started with a further impulse. The impulse can be
present for the whole duration of thejob, then it must be inactive for at least five seconds, so that a
further impulse ends the job [see the figure below). To label a job with “active waiting" label, follow
the steps in Chapter 0.
Job 1 start Job 1 and Job 2 start
|>55l |>55l |>Ssl
0V
>55 | ‘ >55 |
Version 4.0.0 - 0115 77
9. if your signai tower has an additionai biink function, you can activate this on the biink
recognition tab. You can then activate the blink recognition for each tier of your signai
tower and add a description.
at) wm Immmllumnfigmm
morn mam
Dug-
@ 0mm...
”pink“ u -
WERMAStgmh<¢hrttk6mbH ¢ (0. K6 v [new mm v allWlensmtmlsl — D n
mu
mi “out
worm imam Anssst
5 'nmu m an“ I '2”
L‘Jt Hi < y l W) m , in:
mm D .n
mam ‘ y I‘ w , y
E fl A E A I3 E 4 I;
3. The following menu will appear and you can choose between “Off“, ‘ On” or “Blinking“.
0 on
I on
J'IJ'L mm,
Note: Please note that the switch symbol will flicker during activation of this mode. As soon as
activation has been completed the symbol will return to a permanent state.
Note: Please note that you can only activate a blinking mode if blink recognition function for that
tier has been activated.
Note: See safety instructions in chapter i3.
36
WEHMA
SIGNALTECHN‘K
A. The signal Tower then dwsploys the function se‘ecfed for each fier,
ww , mm s‘gmmmk emu . co. m , [Comm mm , .u ww mnsmmusl — D n
WW v5.41
my...”
mm
van-nu
mmmna‘
E Z ‘14
may
(Grundy m )d: mung)
Version 4.0.0 - 0115
B7
7.1.5 Status Change Message
if the Status Change Message option is active for a WiN transmitter, a pobrup window appears
when the signal tower changes state. This function altows you to minimize the WIN sottware and
work with other programs without impairing the monitoring ot your machines. A poprup window witt
atways inform you of any changes in machine status, You can store an individual sound for the
status change message in the settings, see chapter 9.3.
To set up the status change message, proceed as foliows:
i. The Status Change Message can be activated by cticking the “bett” symbot.
(i) ww >WERMASigmh<¢hmk6mbH . (0. K6 v [mm mm v althNmnsmimlsl — D n
1?.“
“mm 5mm:
uh-
ego
mums anon: Aasssr
2 Lumrymmyms ' m «r w
M H
Li
ofi
2. The foliowing window opens and you can choose which tier and the time after which a
popup window witl be created. Your settings are saved by clicking on “OK".
mt) smus Change Message
imam. eargemsageisammrmaujwwis
smmammmm
Pwuaive Oman
Trrngdelay Q)
Rainier ”E
t anuer
Note: When the WIN software is ciosed the userespecitic settings wiii be saved.
38
WEHMA
SIGNALTECHNlK
Note: For The Tier wiTh couhTer inpuT To The WIN TransmiTTer performance, The sTaTus change
message cannoT be generaTed.
3. Once a sTaTus change message has been acTivaTed for 0 WIN TrohsmiTTer, o popeup
window appears whenever There is a change, To Close These messages, click “OK“, If There
are several messages, you can click “Close all“ la close all The messages.
oil) 1 Mains nidlange
0n 75,03,201} 511434
wm rurumm. peflomunoe mus
.‘Ln 02mm rm
Error
Version 4.0.0 - 0115 89
7.1.6 Status transmission
7.1.6.1 WIN transmitter / WIN transmitter control
Note: it the status transmission for 0 WIN transmitter / WlN transmitter control is active, you are
informed by email of a status change of your signal tower, see Chapter 92.1 under Settings.
You can also transter the status change to an external application, see chapter 9.2.2.
To set up the status transmission, proceed as follows:
i. Click on the “envelope symbol".
m wwwgmslgmnmlmmw . :0. m . [cow mm , ammunwmm — D n
Wit-m vs.“
my...”
mm mm mm
2 (Wmuymmym, [q «-
Ersar M — 1, THIS
van—u D I. rm
C:eratlnnal I I. mm
H E fl )5
90
WEHMA
SIGNALTECHNiK
2. in the Status Transmission window, “Generai” tab, you can activate the status transmission
for individuai tiers. You can aiso use the time deiay option to specify when you wish to be
informed, i.e. the minimum time that the signal status must exist before an email is sent or
an appiication is started, if the signal status is cieared before the end of the time delay, no
status transmission is sent.
(iii) Stains transmission fl
lithe slam wallsmsslm Int 3 MN claiming ii. 3mm: an email
will be Sun or in sinus WIII be W in iii aluiial awlimoii
may am: a change um":
(Servant EMBii teuuent
Tier Inns
Tiaiumil ilieslanis alien a change occurs on ilelullwnsi
nets
m l in:
one Save
Version 4.0.0 - 0115 91
3. in the “Email recipient” tab you can setect who should receive the emdit, You can either
send the e-mail to:
o The defduit recipient[sl specified in Settings [see chapter 9.2.i)
. Specified recipient[s]: Choose “Selected recipients" and enter the relevant ermoit
address[esi. For muttipte addresses, enter a semicolon between each address.
0 Specified recipieani, dependent on the activated tier. Setect Define recipients
per tier and enter the emait dddress[es) as required. For muttiote addresses,
enter a semicoton between each address
are Sratustransmlsslon fl
"fiestas Itammssion totaWiN Ira-5mm is actuated an email
willhesunnrflesmnvnllhefwwaldedhmmaullmim
even/am: a chn
Generst Mia-t remem
Warmth: rdlrmng e-mail recipients
‘9 As SDEIfied Inlhe semngs
, 5am recipients
' Definememmhuaflmdmnmspuus
4m oer
3rd her
2nd tier
tst oer
Vm mam ems minute email addusses by adding
$8.? I;
4. To save the setting ciick “OK“.
92
WEHMA
SIGNALTECHNtK
7.1.6.2 WIN transmitter performance
Note: It the status transmission for 0 WIN transmitter is active. you are informed by email of 0 status
change of yourstgnel tower, see chapter 9.2.] underSettihgs.
You can also transfer the status change to on externat uppticatioh, see chapter 9.2.2.
To set up the status transmission, proceed as fottows:
t. Click on the “envelope symbot".
, wwrwgmstgmnmrsmw . :0. KG . [mm mm . althNmnsmtmrsl — D n
7:1 WI
mu.
Mgr-pm Mr
n-mnlw
mm mm mm
2 (mummmw [q «- w
. I. new
Him I. Y-rl
E":r M
a m a A E I ” m :1 rs
Version 4.0.0 - 0115 93
in the Status Transmission window, “General" tab, you can activate the status transmission
for each individual tier. You can aiso use the time deiay option to specify when you wish to
be informed, i.e. the minimum time that the signai status must exist before an eemaii is sent
or an application is started. It the signai status is cleared before the end of the time delay,
no status transmission is sent. With WIN transmitter performance you can configure status
notification to be triggered when a running job reaches a defined percentage of job
progression or a certain quantity produced.
mo Status transmlsslon n
"them mmsslm foraWiN mums .s 3mm an anal
mllbesnuunesmmnberummmmmunaawfim
weryume a Emmi;
swat EMmi rem-em
17a nus
Tmnsmlt the status when a champ mus an the tutlmang
flu:
Transmit the status when A (Adam lab mogltssmn a!
warm has been waded
t aid: ersslw of
‘tmummu
3;? 5';
94
WEHMA
SIGNALTECHNtK
3. tn the Email recipient tab you can select who should receive the emdil. You con either
send the e-moil to:
dddress.
the default recipient specified in Settings (see chapter 9.2.i)
addresslesl. To separate multiple addresses, enter a semicolon after each
specified recipientts): Choose “Selected recipients“ and enter the relevant eemdil
Specified recipient[s], dependent on the activated tier. Select Define recipients
per tier and enter the email dddressles) as required. For multiple addresses, enter
0 semicolon between each address
For WIN transmitter performance, you can also configure email recipients for job progression
and/or quantity produced. Select:
“As specified in the settings“ to use the default recipient
between each address.
(ill) Status transmlsslon
"chem Innsmsum hanN traumas .5 3mm: an anal
mllbesuuunesmwmberummma‘mawIm
weryume 3 Emmy;
General Emir rewx
Warm the fdlmng e-mal recipients
- A; Kneufied mm: semngs
sum Incipient:
V Definememnbauhwwmwflu
4mm
3mm
2mm
tsmzr
Mum me ralmnng rmall remnants when the defined rm
woyusum or warmly has ham rm
or As specified lnthesflhflgs
Selected resilient:
You may emu mane eIVEII midi-555 hi- addlrlfl
6;? I;
4. To save the setting click “OK“.
“Selected recipients“ to notify others. For multiple addresses, entera semicolon
Version 4.0.0 - 0115
95
7.1.7 Report
Note: A report can only be generated from the currently selected view, By selecting the Main View,
all WIN transmitters can be included Select or create a different view to select particular WIN
transmitters.
To generate a report, proceed as follows:
1. Click on Report/Export.
re WlNrWERMASigmhearrian-hri . co. K6 , [Controls‘aliun v aIIWlensminml — D
mug-pm v5.41
a 5; % w 7:; g;
m U 1- 1:.[2
c:eralmnai fl fl fi E i fi I «7 ier E a ’4
2‘ Now select which report you want to generate Choose between:
. Tabular depiction of the current statuses
- Tabular depiction of the currently running jobs
“D Generate report
Hmesdemmmmmshmflbesmn
Dam
é rmmarkmmm
aluminium“
: rmmafkmmymms
omikmmfl.
Ltj LJ
3;? I'
ll“
96
WEHMA
SIGNALTECHN‘K
3. Confirm your serecfion with “OK”,
QID Generate report a
Please salon me momma. should be shm
03an
a rmdemmamemtmum
ammuumm
TMdecKmnflfieqnmflvm-gnhs
Om'mun‘linnlluflynn-iqyis
a?
4. You can now see a preview of your selected report. Additiona‘ functions are described r'n
L! H
secfian 7.7, Reporr and Export Funcrions.
Version 4.0.0 - 0115 97
7.2 Producli
ty Module
Using the ProducTivity Module you can check the producTivity of your machines over any Time
period. You can look for exompie at The iost working day, or define specific Time periods such as
shift patterns. Using this moduie it is possibie To retrospectiveiy onolyze downTime and TouIT
condiTions and thus help improve efficiency in the Tuture.
7.2.1 Productivity display
The producTiviTy views adopt The settings oT the WiN transmitter configuration and of The ConTrol
SToTion Moduie:
. WIN Transmitter Nome
- WiN TronsmiTTer colour and function
- WIN Transmitter signal description
. WIN Transmitter positions
- Name of view
- Background
7.2.1,1 WIN transmitter / WIN lrclnsmilter control
The pie chorTs display The individuoi sTcrtes 0T the WIN transmitters / WIN TrcrnsmiTTers controi.
UIJVUZVZJ
The sTutes CT The WIN Transmitters / WIN TronsmiTTers control correspond To Those of lhe ConTrol
STotion Moduie pius the two stoTes “Otf” [purpiei and “Conneclion Error" (grey).
The “OFF” stole oppiies iT no signal Tower eiemenT is active but there is stili power To The stgnoi
Tower.
The “ConnecTion Error" applies when:
- wireiess communication cannot be estobiished between the WIN transmitter and the WiN
receiver,
- The WIN software is not operotionoi,
- The PC is in the Oftstote,
- The MicrosoTT SQL Server cannot be reached and Therefore no database connection can
be esToblished
- the WiN transmitter is not connected to the powersuppiy or
. The WiN receiver is not connected to The PC.
98
WEHMA
SIGNALTECHNlK
Note: The shaded areas within the pie chart represent the blink recognition for the respective tier,
Clicking on the “magnifying glass" enlarges the pie chart and displays the status descriptions
00.02.24 l
—omo 3|)
:Cmmwmcn
Click on the “magnifying glass" again to zoom out.
Note: It more than one tier has been simultaneously active, 0 yellow triangle will appear.
Version 4.00 - 0115 9‘7
7.2.1.2 WIN transmitter performance
in the pie charts the individual states of the WIN transmitter performance and productivity in a
speedometer chart appears.
tin-15.20
,5 no
so
as I.
p v
The states of the WIN transmitter performance correspond to those of the Control Station Module
plus the two states “Off" (purple) and “Connection Error" [grevls
The "OFF" state applies if no signal tower element is active but there is still power to the signal
tower,
The “Connection Error" applies when:
wireless communication cannot be established between the WIN transmitter and the WW
receiver,
the WW software is not operational,
the PC is in the Off state,
the Microsoft SQL Server cannot be reached and therefore no database connection can
be established
the WW transmitter is not connected to the power supply or
the WW receiver is not connected to the PC.
Note: The shaded areas within the pie chart illustrate the blink recognition for the respective tier.
Clicking on the ”magnifying glass" enlarges the pie chart.
0071672D
75 100
50
,0
Click on the “magnifying glass" again to zoom out
100

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 60
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 5922aed2-f652-11e4-0000-116f8e8e0d44
Producer                        : GPL Ghostscript 8.71
Modify Date                     : 2015:05:06 21:50:26+08:00
Create Date                     : 2015:05:06 21:50:26+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : 5922aed2-f652-11e4-0000-116f8e8e0d44
Format                          : application/pdf
Title                           : Annex no. 5 (Functional Description - User Manual).pdf
Creator                         : acer
Author                          : acer

EXIF Metadata provided by EXIF.tools