WOOSIM SYSTEMS WSP-R242 Mobile Printer User Manual
Woosim System Inc. Mobile Printer
User Manual
MODEL WSP-R242 (2inch Mobile Printer) Rev. 1.0 WOOSIM SYSTEMS Inc. (#501, Daerung Technotown 3th) 115, Gasan digital 2-ro, Geumcheon-gu, Seoul, 153-772 Rep. of KOREA Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice http://www.woosim.com WSP-R242 Rev. 1.0 Copyright WSP-R242 2inch mobile printer operator’s manual. Copyright ⓒ2015 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer OFF , before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer OFF Notice The contents of this manual are subject to change without notice. http://www.woosim.com WSP-R242 Rev. 1.0 Introduction The WSP-R242 is the ideal solution for Mobile banking system , Retail, point of sales, Credit card Transaction, other traveling and mobile computing etc. The general features of WSP-R242 printer are as follows: Compact size (79.2 x 123 x 45.6mm) Light weight(231g) for true mobility Very silent printing thru direct thermal printing method High speed (100mm/sec, MAX) High resolution(203dpi : 8dots/mm). USB, Bluetooth Ver3.0 interface Support Graphic LCD(128×32dots) with Blue LED Backlight Support Magnetic Stripe Reader [option] Support Smart Card Reader [option] Support text and graphic printing Easier paper roll loading by CLAMSHELL design One touch paper cover Printer door open & Paper-out sensor Easier maintenance with self-diagnostic. In field programming – Update Firmware, Download Fonts and Logos Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible. Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer. Agency Approvals http://www.woosim.com WSP-R242 Rev. 1.0 Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 80% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use other solvent. ● The AC adapter, the battery charger and the battery pack may become warm when in use. This is normal and is not a malfunction. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened. Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper. http://www.woosim.com WSP-R242 Rev. 1.0 Federal Communications Commission Radio Frequency Interference Statement FCC ID : QDDWSP-R242 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition. CE WARNING ㆍChanges and modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ㆍIt is desirable that it be installed and operated with at least 20cm or more between the radiator and person’s body(excluding extremities hand, wrists, feet, and ankles) http://www.woosim.com WSP-R242 Rev. 1.0 CONTENTS 1. Outline. .........................................................................................................................................8 1.1. Model classifications. .......................................................................................................8 1.2 Product Part Number System ..........................................................................................8 1.3. Specifications. ....................................................................................................................9 2. Setting up the printer. ............................................................................................................11 2.1. Printer & Accessories ..................................................................................................... 11 2.2. Printer Features ...............................................................................................................12 2.3. Dimensions .......................................................................................................................13 2.4. Replacing paper roll. .......................................................................................................14 2.5. Power supply ....................................................................................................................15 2.5.1. Specified power supply .......................................................................................15 2.5.2. Installing the battery ...........................................................................................15 2.5.3. Recharging the battery pack ..............................................................................16 2.6. Set operation mode .......................................................................................................17 2.6.1. GAP/HOLE SENSOR SETTING ............................................................................19 2.7. Memory switch table ......................................................................................................20 3. Interface ......................................................................................................................................21 3.1. USB ....................................................................................................................................21 3.2. Bluetooth ..........................................................................................................................21 3.3. Magnetic Card Reading .................................................................................................22 4. Smart Card Reader Module ...................................................................................................23 4.1. General Spec. ...................................................................................................................23 4.2. Inserting the SAM card ..................................................................................................23 4.3. Inserting the IC card .......................................................................................................24 4.4. Communication Protocol Sequence ............................................................................25 4.4.1. Regular Operation ................................................................................................25 4.4.2. Irregular Operation (Communication Error) ....................................................25 5. Using the printer ......................................................................................................................26 5.1. Control panel. ..................................................................................................................26 http://www.woosim.com WSP-R242 Rev. 1.0 5.2. The self test ......................................................................................................................27 5.3. Using the Belt clip ..........................................................................................................27 6. Consumable Parts. ...................................................................................................................28 6.1. Recommended paper. ....................................................................................................28 6.2. Printing position. .............................................................................................................28 7. Revision History .......................................................................................................................29 http://www.woosim.com WSP-R242 Rev. 1.0 1. Outline. 1.1. Model classifications. WSP-R242 Model Interface C1 : USB/Bluetooth (Standard) Power None : DC 8.4V 1.2 Product Par t Number System Model name Interface Spec. Wired S40 SC30 W25 Example) 1. Porti-S40 Wireless RS-232C Bluetooth TTL IrDA USB Wireless LAN RS-485 None Parallel None Serial/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 Note) The above table is the interface format which is supported. But some of the interfaces are not supported according to the product and please contact us, if you have any questions regarding the interface. http://www.woosim.com WSP-R242 Rev. 1.0 1.3. Specifications. Item Specifications Print method Direct thermal line printing Character size Characters per line Optional Characters - Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16 - KOR : 24X24(16X24) CHN, JPN : 24X24 - Font A : 32cpl / Font B : 42cpl / Font C : 48cpl - KOR : 16cpl(24) / CHN, JPN : 16cpl Alphanumeric:95, Extended Graphics:128X50 pages, International:10, Simplified/Traditional Chinese, Japanese, Korean Resolution 203dpi, 8dots/mm Print width 2-inch (48mm, 384dots) Print speed 100mm / sec (MAX) Dimension 79.2 x 123 x 45.6mm Weight (w/o paper) 231g Interface USB, Bluetooth Ver3.0 Paper roll Thermal roll paper (58mm wide, 40ø) 1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93, CODE-128, ITF, CODABAR Barcodes 2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE, DATA Matrix, Maxicode Etc :GS1 databar Driver Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible H/W Spec MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit Receive buffer size 1M bytes Sensor Support Cover open, Paper, Label LCD 128×32 Dots FSTN (Blue LED Backlight) MSR Triple tracks (1&2&3 Tracks Reading) *Supports 3DES & AES encryption Smart Card Reader ISO 7816 Compliant [EMV level 1 Certified] / [option] T=0, T=1 support / 2 SAM (Security Application Module) (Continue… ) http://www.woosim.com WSP-R242 Rev. 1.0 Item Specifications Battery Rechargeable 7.4V DC, 1100mAh (Li-ion) Battery duration 1 hour continuous printing Battery charger Environment conditions MCBF (Mean Cycle Between Failure) Input (100~250V AC, 50~60Hz) Output(8.4VDC/0.8A), 4hours full charge time Temperature Humidity Head -10°C ~ 50°C (operating) -10°C ~ 70°C (storage) 30% - 80% (operating) 10% - 90% (storage) Approximately 100Km < Table 1 > http://www.woosim.com 10 WSP-R242 Rev. 1.0 2. Setting up the printer. 2.1. Printer & Accessories Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Communication cable Battery charger adaptor WSP-R242 Battery Pack Thermal roll paper Belt clip ▼ OPTIONAL Smart Card Reader 2 SAM http://www.woosim.com 11 WSP-R242 Rev. 1.0 2.2. Printer Features ▶ Part Name http://www.woosim.com 12 WSP-R242 Rev. 1.0 2.3. Dimensions http://www.woosim.com 13 WSP-R242 Rev. 1.0 2.4. Replacing paper roll. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the One-Touch way by pressing the button in the arrow direction like the picture. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. http://www.woosim.com 14 WSP-R242 Rev. 1.0 2.5. Power supply 2.5.1. Specified power supply The following specification is requested for Power supply. Battery Charger : DC 8.4V/0.8A Avoid using power supply which its power capacity of power current is extremely high. 2.5.2. Installing the batter y NOTE : ● Before installing or removing the battery pack, ensure the printer is OFF. ● If the printer is not used for long period of time, remove the battery pack from the printer. ① To install Battery Pack, proceed as follows: -Insert the Battery Pack in the direction of the arrow. http://www.woosim.com 15 WSP-R242 Rev. 1.0 2.5.3. Recharging the batter y pack For recharging the battery pack, install the battery pack in the printer. Insert the Battery Charger to the charge connector of the printer. NOTE : ● While charging the printer, turn off the printer power. ● Do not remove the battery during charging. ● The battery is consumable parts and when purchasing, compared to the use hour is gradually decreases. (Warranty 6 month) ● If the printer is not used for a long time, unplug the power cord from the printer and outlet. ● The recharging time depends on the voltage level and ambient temperature of the battery. Normally, if takes about 4 to 5 hours to recharge a battery pack. ● You must use only the supplied adapter. ● Red Lamp : charging the battery. Green Lamp : charging is finished. http://www.woosim.com 16 WSP-R242 Rev. 1.0 2.6. Set operation mode In keeping on pressing the Feed and Power button simultaneously until after the LCD Backlight(blue) blinks 5 times, the printer comes out at the circumstance to change the printer mode. (refer Table 2) FEED button : changing Printer MODE status. POWER button : changing OPTION status. *Note No additional mode settings are required to connect Android or iOS devices. ** If you want to change the Bluetooth Mode of printer, you need to disconnect the Bluetooth function of the current paired Smartphone. ** Methods : 1. Turn off the Bluetooth function of the current paired Smartphone. (Bluetooth ICON in LCD is disappeared.) 2. Change the printer mode. (Additionally, we want to recommend you to rest(OFF→ON) the printer and change mode.) Printer LCD status Android status http://www.woosim.com iOS status 17 WSP-R242 Rev. 1.0 [Example] The defaults of the printer are : USB / Density Low / Mark No Use / Sensor High / PWDN 5 min slp If a user wants to modify the defaults with Bluetooth / Density High / Mark Use / Sensor Low / PWDN No Use Press FEED & POWER Button during the LCD backlight flickers 5 times. You will see present COMMUNICATION mode in the LCD. (USB) Press the POWER Button twice. And then, interface mode has set to Bluetooth mode. When you press FEED button once. You will see present DENSITY mode in the LCD. (Density low) Press POWER Button twice. And then the density has set to Density high. When you press FEED button once. You will see present MARK mode in the LCD. (No Use) Press POWER Button once. And then the mark has set to Mark Use. When you press FEED button once. You will see present SENSOR mode in the LCD. (High) Press POWER Button once. And then the sensor has set to Sensor Low. When you press FEED button once. You will see present PWDN mode in the LCD. (5 min slp) Press POWER Button six times. And then the Power down has set to PWDN No Use. If all the mode have set, press the POWER Button and the FEED Button at the same time. After then release the buttons at the same time. Bluetooth / Density High / Mark Use / Sensor Low / PWDN No Use http://www.woosim.com 18 WSP-R242 Rev. 1.0 2.6.1. GAP/HOLE SENSOR SETTING 1. Set Mark as GAP / HOLE on mode setting. 2. If feed button keeps being pressed during self SENSOR SETTING appears on LCD window and paper keeps coming out SENSOR SETTING . 3. If feed button is not pressed after printing more than 3 pages of label 4. Setting is completed as Green and Red LED flash and COMPLETE appears on LCD window. ** Caution : Sensor setting stops if the feed button is not pressed during self test. http://www.woosim.com 19 WSP-R242 Rev. 1.0 2.7. Memor y switch table Mode Communication Port Option Etc. Mode Option USB No use USB(Pro) 1min Sleep Bluetooth 2min Sleep Bluetooth(Pro) 3min Sleep Bluetooth(iAP) 4min Sleep 5min Sleep Low Medium 1min Off High 2min Off No use 3min Off Use 10 4min Off Gap / Hole 11 5min Off Back Low Sensor Medium1 sensitivity Medium2 High Density Power Down Etc. Mark < Table 2 > Notice : Bluetooth(iAP) is the mode which is used in iPod, iPhone and iPad Whole aspect. Etc. (V): no function due to the specification of the product. http://www.woosim.com 20 WSP-R242 Rev. 1.0 3. Interface 3.1. USB The WSP-R242 printer has a USB interface and is connected by means of a 5 pin mini USB socket. In the following table, the signals present on the Mini- USB socket are listed: Pin No. Name Function VCC +5V DM DATA - DP DATA + NC. GND Ground NOTE : ● If you connect the printer interface cable is converted to USB mode. ● When data receiving, when it removes the communication cable, it loses a data. 3.2. Bluetooth Category Specification Bluetooth Spec. Bluetooth Ver3.0 / Class2 (10m) Frequency band 2402~2480 MHz Protocol L2CAP, RFCOMM, SDP Profile GAP, SDAP, SPP http://www.woosim.com 21 WSP-R242 Rev. 1.0 3.3. Magnetic Card Reading ▶ Check the direction of the magnetic stripe card and reading. ▶ Cards can be read in both directions. ▶ If the reading is successful, the card buzzer once, beep three times if it fails. http://www.woosim.com 22 WSP-R242 Rev. 1.0 4. Smar t Card Reader Module 4.1. General Spec. Contact Smart Card Reader Module for ISO/IEC-7816 Support Asynchronous Protocol T=0,T=1 Smart Card Connection Short Circuit Current Limitation 6KV ESD Protection on whole Smart Card Interface Connector : Friction Type with Smart Card presence detection 2 SAM (Security Application Module) EMV Level 1 Certified 4.2. Inser ting the SAM card To install SAM card, proceed as follows: -Insert the SAM card in the direction of the arrow. http://www.woosim.com 23 WSP-R242 Rev. 1.0 4.3. Inser ting the IC card ▶ Check the contact IC chip and the card in the direction of the arrow insert. http://www.woosim.com 24 WSP-R242 Rev. 1.0 4.4. Communication Protocol Sequence 4.4.1. Regular Operation Host Command Module Execution Response 4.4.2. Irregular Operation (Communication Error) 500ms timeout Host Command Command Module Host Command Command is Command Executio Command Error Module CheckSumEr Executio http://www.woosim.com 25 WSP-R242 Rev. 1.0 5. Using the printer 5.1. Control panel. BUTTON - FEED Button : Use to feed paper continuously. - POWER Button : ① When of 5 or more seconds presses and power comes to on or off. ② After pressing the POWER and the FEED button simultaneously, if the ERROR lamp 5 turn signals POWER button is converted with MODE functions. - In keeping on pressing the Feed and Power button simultaneously until after the LCD backlight blinks 5 times, the printer comes out at the circumstance to change the printer mode. (Refer to 2.6. Set operation mode for details about mode conversion) LCD - LCD will display most of the printer status. (details: current printer status, paper out, indicated remaining battery, communication connection etc.) http://www.woosim.com 26 WSP-R242 Rev. 1.0 5.2. The self test Self-Test prints out the current setting value of printer. The way of self-test is as follows. 1. Insert proper paper into the printer. 2. Power on while pressing feed button to start self-test. 3. Printer will print out the current status. (F/W version and set contents) 4. And then pattern of characters will be printed out. 5. Self-test will be finished automatically and turned to the standby status. ※ In case printer does not work properly, please contact Woosim customer service center. 5.3. Using the Belt clip Following the instruction of the arrow, please put the belt clip in the hole and turn and fix the screw to the right by using a screw driver. Afterward, you can use it like the picture below. http://www.woosim.com 27 WSP-R242 Rev. 1.0 6. Consumable Par ts. 6.1. Recommended paper. Type : Thermal Paper Paper width : 58mm Paper thickness : 60±5㎛ Outer diameter : Ø40mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has Near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed Characters may fade. 3. Change of paper color starts from approx 70 ℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc 6.2. Printing position. http://www.woosim.com 28 WSP-R242 Rev. 1.0 7. Revision Histor y Date Version Oct. 13. 2015 1.0 Comments Initialize http://www.woosim.com 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Administrator Create Date : 2015:10:21 11:17:32+09:00 Modify Date : 2015:10:22 10:20:37+09:00 Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Creator Tool : Microsoft® Word 2013 Metadata Date : 2015:10:22 10:20:37+09:00 Producer : Microsoft® Word 2013 Document ID : uuid:e7795e53-942b-4684-8d2d-ba795f97075e Instance ID : uuid:16fa677c-354d-493f-804f-04bf725f2f97 Page Count : 29EXIF Metadata provided by EXIF.tools