Wistron NeWeb DNSA141 802.11n 1x1 IoE module User Manual MODEL SPECIFICATIONS
Wistron NeWeb Corporation 802.11n 1x1 IoE module MODEL SPECIFICATIONS
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2356444 |
| Application ID | c3fPRZjrv+X2ou+YOGXPyA== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 79.77kB (997079 bits) |
| Date Submitted | 2014-08-13 00:00:00 |
| Date Available | 2014-10-03 00:00:00 |
| Creation Date | 2014-05-16 16:49:36 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2014-08-12 11:52:51 |
| Document Title | MODEL SPECIFICATIONS |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | WNC |
DNSA-141 Specification Product Specification for model DNSA-141 Stamp Type IoE Module Version 0.6 May 15, 2014 Networking Business Unit Wistron Neweb Corporation CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE PROPERTY OF THE WISTRON NEWEB CORPORATION AND SHALL NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED, COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF WISTRON NEWEB CORPORATION. The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 1 / 15 DNSA-141 Specification Revision History Rev. V0.4 V0.5 V0.6 History - Initial version - Update RF Tx power and Rx Sensitivity, Antenna pattern Author based on real module Date 2014/1/22 2014/2/21 - Update the absolute rating and recommend use SPI for customer application, AT 2014/5/15 TT TT TT comments and package The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 2 / 15 DNSA-141 Specification Contents 1. KEY FEATURES ................................................................................................................................................................. 4 2. SYSTEM BLOCK DIAGRAM ........................................................................................................................................... 5 3. DNSA-141 OUTLOOK AND PINOUT .............................................................................................................................. 6 4. ELECTRICAL SPECIFICATION ..................................................................................................................................... 8 5. MECHANICAL DIMENSION AND DRAWING ........................................................................................................... 13 6. REGULATORY & ENVIRONMENT .............................................................................................................................. 15 7. PACKAGE INFORMATION ............................................................................................................................................ 15 8. ORDER INFORMATION ................................................................................................................................................. 15 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 3 / 15 DNSA-141 Specification 1. Key Features QCA4002 IoE solution Internal PA and LNA, no external RF switch 2.4GHz Single band IEEE 802.11b/g/n, single stream 1x1 11n support HT20 and HT40 Bandwidth On board printed antenna and U.FL antenna connector(optional) GPIO voltage is flexible, can between 1.8~3.3V Single power supply: 3.3V, Low Power Consumption, also support Green Tx and very low power sleep mode for mobile battery operation application. Can be wake up and go to sleep quickly. 25mm x 20mm size, 2-layer, single side component Operation temperature: -40~+85 degrees C(Industry Class Version) TCP/IP offload, include Encryption SPI Slave interface to the MCU. Pre-certified FCC The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 4 / 15 DNSA-141 Specification 2. System Block Diagram DNSA141 is based on QCA4002 Internet of Everything chip and QCA’s SP141 reference board design in stamp form factor. Inside the module, there is a QCA4002 main chip which control the WLAN RF and BB function, also embedded a small processor which can do the encryption and TCP/IP off load. Only few external components are necessary such as XTAL and Flash. Block Diagram as Fig. 1: Flash is only storing the binary code to control the QCA4002. RF calibration data is stored inside QCA4002 OTP not this flash. QCA also move the common data such as target power and CTL table to driver level called “Board Data File”. This can reduce the OTP size usage. For complex control or more GPIO demanding, customer has to use a Micro Processor to control this module through SPI interface. QCA4004 will be in SPI slave mode. USB interface is only for engineering RD mode such as production testing purpose or reprogram the external flash memory. Fig. 1: Block Diagram The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 5 / 15 DNSA-141 Specification 3. DNSA-141 Outlook and Pinout Fig.2: DNSA-141 Outlook (Left: Top side, Right: Bottom side) Fig.3: DNSA-141 Pinout (Top side) The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 6 / 15 DNSA-141 Specification Table 1: Module Pin assignment and description Table 2: SPI Slave Signals The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 7 / 15 DNSA-141 Specification 4. Electrical Specification General DC electrical characteristics These conditions apply to all DC characteristics unless otherwise specified: Temp = 25 °C, VDD33= 3.3 V Table 3: DC electrical characteristics for digital I/Os Power Consumption Vcc=3.3V, Room temperature Condition Average Unit 11g continue Tx@6M_18dBm 810 11n continue Tx@HT40MCS7_12dBm 600 11b/g and 11n HT20 continue Rx 210 mWatt 11n HT40 continue Rx 240 Chip Power Down 0.04 Sleep 0.4 Note A: External IO voltage (DVDD_GPIO) can be 1.8~3.4V. Note B:QCA4002 need 3.3V and 1.2V supply. For 1.2V supply there are 2 methods: Switching and LDO. Inside the QCA4002, there is embedded a switching regulator to convert 3.3V to 1.2V for its chip core voltage supply. Also it has a LDO driver to act as 3.3V->1.2V LDO driver (might need external transistor). This table we use switching regulator method to have better power efficiency. The tradeoff is we have to add a power inductor near QCA4002 chip. Also shielding height has to be caution to prevent the inductor magnetic field interaction with the iron material in the shielding. Absolute Rating The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 8 / 15 DNSA-141 Specification Symbol Description Range Unit VDDIO All IO supply voltage -0.3~+4.0 Volt 3.3V All 3.3V net -0.3~+4.0 Volt Min Digital IO All Digital IO pins -0.3 Volt Max Digital IO All Digital IO pins (VDDIO+0.3) Volt RFin Max Input RF signal 10 dBm Tstorage Storage Temperature -40~+135 ℃ ESD-HBM Human Body Model, all pins ESD-CDM-nonRF Charged Device Model, non-RF pins Volt 500 Volt ESD-CDM-RF Charged Device Model, RF pins 400 Volt Note: This table is the level that could permanent cause damage to the module. For normal operating, please use below table for design consideration. Recommend Operating Condition Symbol Description Range Unit VDDIO All IO supply voltage 1.8~3.4 Volt 3.3V All 3.3V net 3.15~3.45 Volt Min Digital IO All Digital IO pins -0.2 Volt Max Digital IO All Digital IO pins (VDDIO+0.2) Volt SPI slave interface electrical timing diagram Fig.4: SPI salve timing Table 4: SPI slave port timing (48 MHz reference clock) The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 9 / 15 DNSA-141 Specification RF Tx target power [unit:dBm], IEEE mask and EVM compliance power. Mode/Rate MHz 2412~2472 11b 1Mbps 17 11b 11Mbps 17 11g 6Mbps 18 11g 54Mbps 14 11n HT20 MCS0 18 11n HT20 MCS7 13 11n HT40 MCS0 16 11n HT40 MCS7 12 RF Rx sensitivity [unit:dBm]: Mode/Rate MHz 2412~2472 11b 1Mbps -92 11b 11Mbps -85 11g 6Mbps -88 11g 54Mbps -71 11n HT20 MCS0 -87 11n HT20 MCS7 -67 11n HT40 MCS7 -64 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 10 / 15 DNSA-141 Specification Antenna performance: on board printed ANT The on board printed antenna VSWR is better than 2.5 and efficiency is around 48%. Fig.5 Antenna VSWR (Testing point is same as Fig.6) The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 11 / 15 DNSA-141 Specification Fig.6: Antenna radiation pattern RF path: A. On board printed antenna: Please do not cover or put anything close to the antenna otherwise the radiation efficiency will be degraded. B. On board U.FL connector*1: optional. C. RF PAD: Ideally, this can bridge the RF signal to the device outside the board. Application board designer must be caution on the impedance control of the RF pad and 50 Ohm trace at platform board. D. DNSA-141 adopts printed antenna and U.FL conn. is no load in generic MP version. Fig. 7: RF ports and on-board antenna (1pcs shielding in MP stage) The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 12 / 15 DNSA-141 Specification 5. Mechanical Dimension and Drawing Fig. 8: Mechanical drawing with shielding Note: MP version default is without U.FL connector The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 13 / 15 DNSA-141 Specification Recommend layout footprint for the application board Fig. 9: Module Land Footprint Soldering Reflow Profile: Using WNC’s internal SMT line profile. Solder paste: SAC305. Lead Free Solder Profile Type Selection (Sn3.0Ag0.5Cu) Lead Free Temperature <3 ℃/sec Max. Rising Slope Profile Parameter Setting Time Soaking Time 140~190 ℃ 70~105sec Wetting Time 217 ℃ 70~90sec Peak Temperature 230~250 ℃ Over Wetting Time 230 ℃ 40~60sec Table 5: Reference soldering profile for customer to mount the module. The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 14 / 15 DNSA-141 Specification 6. Regulatory & Environment Pre-certified FCC Regulatory Compliance: IC & CE Environment policy: All material used inside this module is Lead Free, RoHS compliant. 7. Package Information 80 pcs DNSA-141 * 10 Trays = 800 pcs/SET 800 pcs * 3 SETS(33 Trays) = 2,400 pcs/CARTON PS Tray Max. Temp is 75℃ Fig. 10: DNSA-141 Package Drawing 8. Order Information Model Description DNSA-141(I) I-temp standard, SPI, Printing ANT ver. DNSA-141(I_UFL) I-temp standard, SPI, U.FL antenna conn. ver. The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of WNC. 15 / 15 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 4441A-DNSA14”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 4441A-DNSA14". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) 2) The antenna must be installed such that 20 cm is maintained between the antenna and users The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID: NKR-DNSA141 can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: NKR-DNSA141”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:05:16 16:49:36Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2014:08:12 11:52:51+08:00 Metadata Date : 2014:08:12 11:52:51+08:00 Format : application/pdf Creator : WNC Title : MODEL SPECIFICATIONS Producer : Microsoft® Office Word 2007 Document ID : uuid:252ddc46-53e0-40bf-9729-111d217a685b Instance ID : uuid:7b3839a4-c1ef-4d6d-9fd3-61ba4d2db781 Has XFA : No Page Count : 19 Language : zh-TW Author : WNCEXIF Metadata provided by EXIF.tools