ZTE VICKI Wireless Netbook User Manual 00 C DC for XP
ZTE Corporation Wireless Netbook 00 C DC for XP
ZTE >
Contents
user manual pt7
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1155418 |
| Application ID | P7ihzHVy3yLB84zPDZz4dw== |
| Document Description | user manual pt7 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 321.95kB (4024368 bits) |
| Date Submitted | 2009-08-19 00:00:00 |
| Date Available | 2009-08-25 00:00:00 |
| Creation Date | 2009-07-15 11:11:13 |
| Producing Software | Adobe Acrobat 8.1 |
| Document Lastmod | 2009-07-15 11:11:18 |
| Document Title | 00-C_DC for XP-.\.. |
| Document Creator | Adobe Acrobat 8.1 Combine Files |
| Document Author: | PROPC051 |
Peripherals Using USB Compatible Peripherals Must Know for USB Connection ・Before connection, please install the driver of USB device. Follow the instruction of the wizard until [Finish] ・Ensure the specific direction for plugging USB cable. DO NOT force to plug the cable into the port. ・Plural USB ports are located in the notebook, you can choose the port you want to use. ・If you need more USB ports, you can connect a USB hub to increase the ports. button appears. It means the USB connection setting is done. Connecting USB Compatible Peripherals Notice Plug the USB cable into the USB port of the notebook. ・If the wizard doesn’t pop up, please unplug the USB cable and plug it again after 3 seconds. ・The specific USB drivers is required, if it is not built in this USB device. Click [Finish] button. Depends on what USB device you connect, the software installation may be required later. USB Port （ ） Notice After plugging the USB cable, the “Found New Hardware Wizard” will appear. 38 ・You can use the USB device immediately, when plug it into the USB port next time. ・If the USB device is connected to the different USB port, the “Found New Hardware Wizard” will appear. Please follow the steps above to do the setup again. Peripherals Using Memory Card Type of Memory Cards The following types of memory card listed below can be used on this notebook. You can use memory cards to store or read your files. Memory Card Copyright Protection Erasion Prevention SD Yes Yes SDHC Yes Yes MMC No No Memory Stick Yes Yes Memory Stick Pro Yes Yes ・The information disclosured in this manual is based on the data collected when compiled this manual. Notice Insert Direction for Memory Cards The different insert directions of memory cards are showed below. Verifying the correct direction and inserting the card. Memory card’s insert direction Memory Stick Memory Stick Pro SD Card/MMC Memory Card Slot 39 File Copy Inserting Memory Card The procedures of using memory card are showed below. When the system recognize the memory card, you can drag and drop file from the other disk to the card. The file can be copied into the card. Ensure the correct insert direction and insert the card into the slot surely. Notice ・Each kind of card has its specific insert direction. Ensure you insert the card in right direction. ・The“miniSD card” or the “memory stick duo” and so on which does not mentioned in the manual, cannot be used with the notebook. Before inserting the memory card, please verify card types. About the Write-Protect Switch There is an write-protect switch on the side of the SD card, and the rear of the memory stick.When the switch is adjusted to the “LOCK” position, it can prevent the data elimination or overwriting. Select the action you want and click [OK]. Memory Card Removal Before removing the memory card, please ensure the card operation is finished (data reading and writing has been done). Attention Notice Depends on different cards you insert, the contents , the contents of the dialog box can be different. Notice Tip ・Click [Cancel], if you want to terminate this action. 40 While using various memory cards on Windows, please do not remove the memory card unattentively. It is possible to damage the memory card and the memory card slot. When “Safe To Remove Hardware”icon appears, the windows is not able to recognize the memory card until Windows is restarted. Peripherals Installing Memory Module About Memory Memory, is something like the desk. When the top of the desk is wide, your job is easy to do. When entire capacity of memory is large, the operation of application software becomes smooth. When the memory is small・・・ Work Flow for Memory Installation Pay attention when handling memory module ・Before installation, please turn off the notebook Attention ● Turn off the notebook ● Remove battery pack and AC adapter ● Memory Installation（ Page 42） ●Verify the memory installed（ ・Before installation, please remove the battery pack and AC adapter. ・Memory is the extremely weak part in static electricity. It is possible to damage it when people or objects touch it with static electricity. Please remove static electricity of the body before touch the memory. ( Page 35) ・DO NOT touch the pin of memory. It is possible to cause memory broken by pin contact failure. ・Memory is a extremely weak part, please keep or remove it carefully. Page 43） 41 Exchange Memory Close the LCD lid and turn over the notebook. Insert new memory module to the connector of the memory slot（①） Push down and insert the memory to the memory slot connector until the "click" sounds. （②） ① Remove the screw which locks the memory module cover. ② Notice ・Please make sure not insert the memory in the wrong direction. ・Please make sure the notch on memory’s lower part is agreeable to the convex section of the slot. Slide the memory module cover forward （①）Raise and remove the cover（②） ① Install the memory module cover, lock with the screw. Notice Please do not break the nail on the right side of the memory module cover surface when you install the memory module cover. ② Open the hook which locks memory（①） Remove memory from the memory slot （②） ① ① ② Notice When opening the hook, do not apply unreasonable force and do it prudently. When the power is applied too much, It is possible to bend the hook. 42 Install battery pack and connect AC adapter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2009:07:15 11:11:18+08:00 Create Date : 2009:07:15 11:11:13+08:00 Metadata Date : 2009:07:15 11:11:18+08:00 Creator Tool : Adobe Acrobat 8.1 Combine Files Format : application/pdf Title : 00-C_DC for XP-.\.. Creator : PROPC051 Document ID : uuid:0a0ad951-b2a6-4575-86f1-4400cefbd799 Instance ID : uuid:75aafd46-2b90-4054-b076-30bfbcea41a9 Producer : Adobe Acrobat 8.1 Has XFA : No Page Count : 5 For : b, b Bounding Box : 0 0 842 907 Container Version : 12 Creator Version : 12 Author : PROPC051 Image Height : 907 Image Width : 842 Image Size : 842x907 Megapixels : 0.764EXIF Metadata provided by EXIF.tools