ZTE VICKI Wireless Netbook User Manual 00 C DC for XP

ZTE Corporation Wireless Netbook 00 C DC for XP

user manual pt7

Peripherals38Using USB Compatible Peripherals・Before connection, please install the driver of USB device.・Ensure the specific direction for plugging USB cable. DO NOT force to plug the cable into the port.・Plural USB ports are located in the notebook, you can choose the port you want to use.・If you need more USB ports, you can connect a USBhub to increase the ports.Plug the USB cable into the USB port of thenotebook.After plugging the USB cable, the “Found NewHardware Wizard” will appear.Follow the instruction of the wizard until [Finish]button appears. It means the USB connectionsetting is done.Click [Finish] button.Depends on what USB device you connect, thesoftware installation may be required later.32USB Port （ ） 1Notice ・If the wizard doesn’t pop up, please unplugthe USB cable and plug it again after 3 seconds.・The specific USB drivers is required, if it is notbuilt in this USB device.Notice・You can use the USB device immediately,when plug it into the USB port next time.・If the USB device is connected to the differentUSB port, the “Found New Hardware Wizard”will appear. Please follow the steps above todo the setup again.Must Know for USB ConnectionConnecting USB Compatible Peripherals
Peripherals39Using Memory CardThe different insert directions of memory cards are showed below.Verifying the correct direction and inserting the card.The following types of memory card listed below can be used on this notebook.You can use memory cards to store or read your files.Memory CardSDSDHCMMC Memory StickMemory Stick ProCopyright ProtectionYesYesNoYesYesErasion PreventionYesYesNoYesYesMemory card’s insert direction SD Card/MMCMemory StickMemory Stick ProMemory Card Slot Notice・The information disclosured in this manual is based on the data collected when compiled this manual.Type of Memory CardsInsert Direction for Memory Cards
40The procedures of using memory card are showed below.Ensure the correct insert direction and insert thecard into the slot surely.Select the action you want and click [OK].・Click [Cancel], if you want to terminate this action.File CopyWhen the system recognize the memory card, you can dragand drop file from the other disk to the card. The file can becopied into the card.About the Write-Protect SwitchThere is an write-protect switch on the side of the SD card, andthe rear of the memory stick.When the switch is adjusted to the“LOCK” position, it can prevent the data elimination or overwriting.Before removing the memory card, please ensurethe card operation is finished (data reading andwriting has been done).1Tip 21Inserting Memory Card・Each kind of card has its specific insert direction.Ensure you insert the card in right direction.・The“miniSD card” or the “memory stick duo” and so on which does not mentioned in the manual, cannot be used with the notebook. Before inserting the memory card, please verify card types.Notice Depends on different cards you insert, the contents, the contents of the dialog box can be different.Memory Card RemovalWhen “Safe To Remove Hardware”icon appears,the windows is not able to recognize the memorycard until Windows is restarted.AttentionWhile using various memory cards on Windows,please do not remove the memory cardunattentively. It is possible to damage the memorycard and the memory card slot.Notice Notice
Peripherals41Memory, is something like the desk. When the top of the desk is wide, your job is easy to do. When entire capacity ofmemory is large, the operation of application software becomes smooth.Installing Memory ModuleAbout MemoryWhen the memory is small・・・ Attention Pay attention when handling memory module・Before installation, please turn off the notebook・Before installation, please remove the batterypack and AC adapter.・Memory is the extremely weak part in staticelectricity. It is possible to damage it when peopleor objects touch it with static electricity. Pleaseremove static electricity of the body before touchthe memory. ( Page 35)・DO NOT touch the pin of memory. It is possibleto cause memory broken by pin contact failure.・Memory is a extremely weak part, please keepor remove it carefully.Work Flow for Memory Installation● Turn off the notebook● Remove battery pack and AC adapter● Memory Installation（Page 42）●Verify the memory installed（Page 43）
42Close the LCD lid and turn over the notebook.Remove the screw which locks the memory modulecover.Slide the memory module cover forward（①） Raise and remove the cover（②）Open the hook which locks memory（①）Remove memory from the memory slot （②）Insert new memory module to the connector of thememory slot（①）Push down and insert the memory to the memory slot connector until the "click" sounds. （②）Install the memory module cover, lock with thescrew.Install battery pack and connect AC adapter.76① ② 5 ① ①② 4① ② 321Exchange Memory Notice ・Please make sure not insert the memory in the wrong direction.・Please make sure the notch on memory’s lowerpart is agreeable to the convex section of the slot.Notice Please do not break the nail on the right side of the memory module cover surface when you installthe memory module cover. Notice When opening the hook, do not applyunreasonable force and do it prudently. Whenthe power is applied too much, It is possible tobend the hook.

Navigation menu