ZhaofengweiTechnology ZR303RX Wireless baby monitor receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3967550
Application ID	AStbmM72ERSMPv1vh88SvA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	113.06kB (1413218 bits)
Date Submitted	2018-08-17 00:00:00
Date Available	2018-08-17 00:00:00
Creation Date	2018-07-28 17:15:56
Producing Software	Corel PDF Engine Version 17.4.0.887
Document Lastmod	2018-08-10 10:21:56
Document Title	Users Manual
Document Creator	CorelDRAW X7
Document Author:	Administrator

2.4GHz Digital
Overview of your Parent Unit
WELCOME...
VIDEO BABY MONITOR
to you new digital Baby Monitor!
MODEL:ZR303TX-RX
Overview of your Baby Unit
4 3 2
Thank you for purchasing the product.Now you can see
and hear your baby sleeping in the other room or you can
13
monitor your older children in their playroom.
12
10
This User’s Guide provides you with all the information you
9 6
11
need to get the most from your product.
Before you can use the baby monitor, we recommend you
1.Lcd display
3.Power indicating led
it continues to work if you disconnect it from the mains
4.Menu key/OK
1.Light Sensor
power to carry it to another location. Please read the safety
5.Power key
2.Infrared LED
6.Volume-key/Down key (menu screen)
3.Camera Lens
7.Volume+key/Up key(menu screen)
4.Power LED
PACKING LIST
1×Parent Unit
1×Baby Unit
8. PTT key
5.Microphone
9.Microphone
6.Speaker
10.Speaker
7.Pair key
11.Power adapter connector
8.Temperature sensor
12.Music control key.
Table of contents
9.Power adapter connector
2. Getting started
2.1 Baby unit power supply
1.Safety instructions…………………………....……6
WARNING
This baby monitor is compliant with all relevant standards
2.1 Baby unit power supply……………....……7
regarding electromagnetic fields and is, when handled as
2.2 Parent unit power supply………….....……8
described in the User ’s Guide, safe to use. Therefore,
3.Using the Baby Monitor…..…..……….........……9
always read the instructions in this Users Guide carefully
1. Safety Instructions
2.Getting started………………………………...……7
3.1 Setting up……………………….…...………9
13. Return
2×Power adapter
USER’ S GUIDE V1.0
2.Vox indicating led
insert and fully charge the battery in the parent unit, so that
instructions on page 6 before you install the units.
2.2 Parent unit power supply
before using the device.
3.2 Pairing camera………………………..…...10
Adult assembly is required.Keep small parts away
3.3 Night vision…………………………………10
from children when assembling
3.4 Music player………………………………..10
This product is not a toy.do not allow children to play
3.5 Talk function………………………………..10
with is.
3.6 Adjusting the volume………………..…….10
This baby monitor is not a substitute for responsible
Charging the parent unit fully before use is
3.7 Reset the parent unit………………………10
adult supervision.
recommended
4.Monitoring screen icons…………………………..11
Do not place the baby unit or cables in the cot or
5.Menu Options………………………………………12
within arm’s reach of the baby (at least 1 meter away).
This will allow the unit to operate on battery in the event of a
1. Connect the small plug of the power adapter to the
5.1 Main menu…………………………………..12
Keep the cords out of reach of children
baby unit and the other end to the mains socket.
5.2 Camera Registration……………………...13
Do not use the baby monitor near water or a heat
NOTE :only use the power adapter provided
5.3 Alarm…………………………………………13
source
5.4 Settings……………………………………..14
Only use the power adapters provided
5.5 Languages…………....…………………...15
Do not touch the plug contacts with sharp or metal
6.Wall mounting instructions…………........……..16
1.Connect the plug of the power adapter to the parent
unit and the other end to the mains socket
2. A green light led will display indicate the baby unit is
working
NOTE :only use the power adapter provided
2.The LCD screeni lluminates and starts up automatically
after a few seconds.
objects,
power failure
3.Press and hold the power key at least 3 seconds to turn
on the parent unit.
3. Using the Baby Monitor
3.2 Pairing camera
The enclosed baby unit has already been registered, You
3.1 Setting up
4.Monitoring Screen lcons
5.Menu Options
5.1Main menu
do not need to register it again unless the baby unit loses its
Place the baby unit in a convenient location(e.g.on a
link with parent unit,see section”5.2Camera registration
table)and point the camera lens towards the area you
”for more details.
want to monitor. Adjust the baby unit uniti you are
3.3 Night vision
satisfied with the image in the parent unit.
3 4
30℃
The baby unit has 1 high-intensity infrared LED for picking
To mount the baby unit on the wall, see section”9.
up clear images in the dark.
wall mounting instruction”for more details.
3.4 Music Player
Press and hold
key at least 3 seconds will turn on
the music player and play lullaby, through the baby unit;
3.5 Talk Function
Press”Menu”key at monitoring screen will enter the main
Press and hold
menu, It contains 4 items:
key on the parent unit to talk to your
1. Signal strength indicator
baby through the baby unit ioudspeaker.
2. Temperature of the baby’s room
1.Camera
3.6 Adjusting the volume
3. Alarm activated
2.Alarm
When the video is playing mode, press
volume or
NOTE
22 : 36
10 . 01
long press the key 3 seconds again will turn off it.
key to decrease
key to increase volume, The display will show
4. Battery indicator
3.Settings
5. Date and time
4.Languages
You can press the “Up” key or “Down” key to move the
the current volume for 5 seconds.
Do not place the baby unit within baby’s reach! if there
cursor to select an item and press”Menu”key will enter
is interference on the picture or sound,try moving the
units to different location, and ensure, they are not
close to other electrical equipment.
3.7 Reset the parent unit
the sub-menu which you selected.
Press and hold the power key at least 3 seconds,the parent
Press”Return”key will back to monitoring screen
unit will be forced to restart.
10
5.2 Camera Registration
12
11
5.4 Settings
5.4.5 VOX Sensitivity
6. Wall mounting instructions
5.4.1Time and date
There are contains 2 items in this menu
Set time/date
Switch the Vox sensitivity at Low/Medium/High level
1. Use the template below to mark the wall in the correct
5.4.6 LCD backlight
You are be able to adjust the brightness of the LCD
you are viewing and the LCD backlight active time in
menu operation.
places to drill holes for wall- mounting screws
2015
FCC WARNING
6mm
headscrew
01
33mm
07
20
Press“menu”key to entry registering screen, then
push the pair key on the back of baby unit within 10
seconds.
33
Press"music"key to choose item "Up"and"down"key to
change value
5.3 Alarm
5.4.2 Temperature unit
Switch the unit to Celsius of Fahrenheit
5.5 Language
5.4.3 Anti-flicker
You are able to adjust the frequency of 50/60 Hz to
suit your lighting for anti-flicker
5.4.4 System mode
Press"music"key to choose item "Up"and"down"key to
change value
13
6mm
headscrew
This menu allows you to choose the working mode
from the following:Normal mode from the /VOX mode
14
Language setting menu allows you to choose your
language from the following:
1、English
2、French
3、Spanish
4、Portuguese
5、ltalian
6、German
7、Turkish
8、Russian
2. Insert 4mm head screws (not supplied) into the holes
and tighten the screws. Then,align your baby unit with the
screws and push it down.
3. Point the camera lens towards the ares you want to
monitor. Adjust the baby until you are satisfied with the
image in the parent unit.
15
16
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation. Any
changes or modifications not expressly approved
by the party responsible for compliance
could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help. The device has been evaluated to meet general RF
exposure requirement. The device can be used in
portable exposure condition without restriction
17
FCC ID: 2AQMY-ZR303RX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : 303说明书20180728.cdr
Create Date                     : 2018:07:28 17:15:56+08:00
Creator Tool                    : CorelDRAW X7
Modify Date                     : 2018:08:10 10:21:56+08:00
Metadata Date                   : 2018:08:10 10:21:56+08:00
Producer                        : Corel PDF Engine Version 17.4.0.887
Document ID                     : uuid:1eee0e4a-191e-43d3-8bec-54271cfd737a
Instance ID                     : uuid:05f1072d-61c0-4df3-bc9d-7cb6b4da6a03
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools