User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 929760 |
| Application ID | quS0E8Q3TPPaCcBZ2Sh/Fg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 186.84kB (2335473 bits) |
| Date Submitted | 2008-04-18 00:00:00 |
| Date Available | 2008-04-18 00:00:00 |
| Creation Date | 2008-04-08 13:59:49 |
| Producing Software | GPL Ghostscript 8.54 |
| Document Lastmod | 2008-04-10 12:22:37 |
| Document Title | User Manual |
| Document Creator | PDFCreator Version 0.9.3 |
| Document Author: | Schuessler |
User Manual
Version 1.2
Compact4
Star Diagnosis
ads-tec GmbH
Raiffeisenstr.14
D-70771 Leinfelden-Echterdingen
Tel: +49 (0) 711 / 45894-0
Fax: +49 (0) 711 / 45894-990
mailbox@ads-tec.com
www.ads-tec.com
User Manual Compact 4 V 1.2
Copyright
ads-tec GmbH
Raiffeisenstr.14
D-70771 Leinfelden-Echterdingen
Germany
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
INDEX
ABOUT US .......................................................................................................................................... 5
REMARKS ................................................................................................................................. 6
1.1
RELEVANT DATA COMMUNICATION WITH THE DEVICE ............................................................................ 6
1.2
DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE ............................................................... 6
1.3
DATA, IMAGES, AMENDMENTS AND VARIATIONS ................................................................................. 6
1.4
TRADEMARKS ............................................................................................................................. 6
1.5
COPYRIGHT ............................................................................................................................... 7
1.6
ENVIRONMENTAL CONDITIONS ........................................................................................................ 7
1.7
CERTIFICATIONS / TESTINGS.......................................................................................................... 8
1.8
SCOPE OF DELIVERY .................................................................................................................... 8
OPERATING INSTRUCTIONS ......................................................................................................... 9
2.1
OPERATING LOCATION ................................................................................................................. 9
2.2
DAMAGES DUE TO IMPROPER USE ................................................................................................... 9
2.3
WARRANTY / REPAIRS................................................................................................................ 10
2.4
HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES ................................................................... 10
2.5
SAFETY INSTRUCTIONS............................................................................................................... 10
INSTALLATION ........................................................................................................................ 11
3.1
MULTIFUNCTION UNIT ................................................................................................................ 11
3.2
INTERFACES OF THE COMPACT4 MULTIFUNCTION UNIT ........................................................................ 13
3.3
FUNCTIONS OF THE MULTIFUNCTION UNIT ....................................................................................... 16
3.4
EXTERNAL DEVICE DIMENSIONS .................................................................................................... 17
3.5
EXTERNAL DEVICE DIMENSIONS INCLUDING DOCKING STATION .............................................................. 18
COMMISSIONING ..................................................................................................................... 19
4.1
AVAILABLE INTERFACES .............................................................................................................. 19
4.2
READINESS FOR OPERATION CHECKS ............................................................................................. 19
FRONT PANEL FUNCTIONS.......................................................................................................... 20
5.1
STATUS INDICATORS.................................................................................................................. 20
5.2
FRONT CONTROL KEYS................................................................................................................ 21
5.3
TOUCH SCREEN ........................................................................................................................ 22
INTERFACES............................................................................................................................ 23
6.1
20V DC POWER SUPPLY ............................................................................................................. 23
6.2
14.4V DC ACCUMULATOR OPERATING MODE .................................................................................... 24
6.3
USB CONNECTIONS ................................................................................................................... 26
6.4
SD CONNECTOR ....................................................................................................................... 27
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
6.5
NETWORK CONNECTION (RJ45) ................................................................................................... 28
6.6
EXPRESSCARD SLOT .................................................................................................................. 28
6.7
MIC IN .................................................................................................................................. 29
6.8
LINE OUT ................................................................................................................................ 30
6.9
WLAN................................................................................................................................... 30
HARDWARE-SPECIFIC SOFTWARE................................................................................................ 31
7.1
SOFT KEYBOARD ....................................................................................................................... 37
ACCESSORIES.......................................................................................................................... 39
8.1
DVD DRIVE / EXTERNAL TYPE ...................................................................................................... 39
8.2
SAFETY OF LASER PRODUCTS ....................................................................................................... 40
REGULATORY APPROVALS ......................................................................................................... 41
9.1
CERTIFICATIONS / TESTINGS........................................................................................................ 41
9.2
ELECTROMAGNETIC COMPATIBILITY (EMC)...................................................................................... 42
9.3
FCC-APPROVAL ........................................................................................................................ 43
10
TECHNICAL DETAILS ................................................................................................................. 44
10.1
DISPLAY DATA.......................................................................................................................... 44
10.2
COMPUTER DATA ...................................................................................................................... 44
10.3
GENERAL DATA ......................................................................................................................... 44
11
SERVICE AND SUPPORT ............................................................................................................. 45
11.1
ADS-TEC SUPPORT
11.2
COMPANY ADDRESS ................................................................................................................... 45
.................................................................................................................... 45
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
ABOUT US
ads-tec GmbH
Raiffeisenstr. 14
70771 Leinfelden-Echterdingen
Tel: +49 (0) 711 / 45894-0
Fax: +49 (0) 711 / 45894-990
www.ads-tec.com
Germany
ads-tec GmbH provides large enterprises and globally active corporations with cutting edge
technology, up-to-date know-how and comprehensive services in the area of automation
technology, data processing technology and systems engineering.
ads-tec GmbH implements full automation solutions from planning to commissioning and is
specialized in handling and material handling technologies.
The data systems division develops and produces PC based solutions and offers a broad
range of industrial PCs, thin clients and embedded systems.
ads-tec is specialized in modifying and optimizing embedded operating systems and
develops software tools to complement its hardware platforms.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
1 REMARKS
1.1
RELEVANT DATA COMMUNICATION WITH THE DEVICE
The following documents are essential for setting up and operating this device:
USER MANUAL:
Contains information for installation, commissioning and operating the device along with
technical data of the device hardware.
1.2
DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE
Warning:
The “Warning” symbol precedes warnings on uses or operations that might either lead to
personal injury and/or hazards, or to any hardware and software damages.
Note:
This Symbol indicates special notes, terms and/or conditions that strictly need to be
observed to ensure optimised and/or zero-defect operations. It also precedes tips and
suggestions for efficient unit implementation and software optimisation.
1.3
DATA, IMAGES, AMENDMENTS AND VARIATIONS
The texts, data and images herein are not binding. The right to any subsequent amendment
and/or variation due to any technical and engineering progresses in the art whatsoever is
hereby reserved.
1.4
TRADEMARKS
It is hereby notified that any software and/or hardware trademarks further to any company
brand names as mentioned in this User’s Guide are all strictly subject to the various
trademark, brand name and patent protection rights.
WINDOWS®, WINDOWS® CE and WINDOWS® CE.net™ are registered trademarks of
Microsoft Corp.
Citrix® and ICA® are registered trademarks of Citrix Systems Inc.
Intel® and Pentium® are registered trademarks of Intel Corp.
IBM®, PS/2® and VGA® are registered trademarks of IBM Corp.
CompactFlash™ and CF™ are registered trademarks of SanDisk Corp.
Any further additional trademarks and/or brand names herein, be they domestic or
international, are hereby duly acknowledged.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
1.5
COPYRIGHT
This User’s Guide inclusive of all the images it contains is entirely proprietary and subject to
copyright. Any irregular use of this Guide by third parties infringing copyright terms is thus
strictly forbidden. Reproduction, translation, as well as electronic and photographic image
storage and/or amendment processes, are subject to prior written authorisation directly by
M/s. ads-tec GmbH.
Any violation and infringement thereto will be held liable for compensation of all damages.
1.6
ENVIRONMENTAL CONDITIONS
The device may be operated under the following conditions. Failure to observe these
specifications will terminate any warranty for this device. Ads-tec cannot be held liable for
any damages arising due to improper use and handling.
•
Temperature with fan
In operation
For storage
0 … 40 C
-20 … 60 C
(Because of the integrated maximum temperature memory)
•
•
Humidity
In operation
10 … 85% without any condensate
For storage
10 … 85% without any condensate
Vibrations
In operation
•
MIL-STD-810F acc to method 514.5, figure C1
Shock resistance
In operation
15 G, with a half-wave of 11 ms duration
(DIN EN 60068-2-27)
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
1.7
CERTIFICATIONS / TESTINGS
The Compact 4 system has the following certifications:
UL/cUL201
EN61000-6-2
device complies with standard
EN61000-6-4
device complies with standard
Application for certification is filed
FCC permission
Application for certification is filed
GOST-R certificate
Application for certification will be filed
MIC certification
Application for certification will be filed
Application for WLAN certificates
for 802.11 a/b/g
EU countries
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
Application for certification in USA / Canada
2.400 MHz - 2483,5 MHz
5.150 MHz - 5.350 MHz
5.725 MHz – 5.875 MHz
Application for certification in Japan
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
Application for certification in Australia
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
CE compatibility (class A)
Note:
A respective conformity declaration for the authority in charge is available on request from
the manufacturer.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.
1.8
SCOPE OF DELIVERY
The following components are included in the scope of delivery:
•
1 x device
•
1 x transport case
•
1 x 20V DC power supply unit
•
1 x multiplex adapter
•
1 x multifunctional unit
•
1 x DVD drive, external
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
2 OPERATING INSTRUCTIONS
INSTRUCTIONS
This device contains electrical voltages and extremely sensitive components. The
manufacturer, or a service partner authorised by the manufacturer, should be consulted if
you plan to make any modifications. For this type of work, the device must be switched off
at the mains and the power lead must be disconnected. Suitable measures for avoiding
electrostatic discharge towards parts of the components when touching the equipment must
be taken. If the device is opened by an unauthorised person, hazards for the user might
arise and any warranty claim will cease.
General instructions:
•
All users must read this manual and have access to it at all times.
•
Installation, commissioning and operation may only be carried out by trained and
qualified staff.
•
The security instructions and the manual itself must be observed by all persons who
work with this device.
•
At the location of use the valid guidelines and regulations for accident prevention
must be observed.
•
The manual contains the most important instructions on how to use this device in a
safe way.
•
Appropriate storage, proper transport, installation and commissioning, as well as
careful operation are prerequisites for ensuring safe and proper operation of the
device.
Warning:
Any leads (e.g. power leads, interface cables) may only be connected if the device is
switched off in order to avoid damaging the device.
2.1
OPERATING LOCATION
This device is designed for use in industry, in particular in workshops. You have to take care
that the environmental conditions indicated in the technical data specification are met. Using
the device in non-specified environments, for example, on board ships, or in areas that
might contain explosive gases or in extreme heights is prohibited.
Warning:
The device may only be switched on after acclimatising to the ambient temperature in
order to avoid condensate accumulation. The same applies if the device has previously
been exposed to extreme temperature variations.
To avoid overheating: The device must not be exposed to direct radiation by sunlight or
any other light or heat source.
2.2
DAMAGES DUE TO IMPROPER USE
Should the service system have evident signs of damages incurred e.g. due to wrong
operation or storage conditions or due to improper unit use, the unit must be
decommissioned or scrapped. Ensure that it is safe from accidental re-implementation.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
2.3
WARRANTY / REPAIRS
During the unit warranty period, any repairs thereto must strictly be conducted solely by the
manufacturer or by service personnel that has been duly authorised by the manufacturer.
2.4
HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES
Caution:
Danger of explosion and the release of toxic substances
Lithium batteries should not be exposed to fire, soldered, recharged, opened, shortcircuited, reversed or heated above 100 °C and they should be disposed of properly as well
as protected against sunlight, moisture and condensation.
The lithium battery can only be replaced by the same type or a type recommended by the
manufacturer.
The used lithium battery should be disposed of in accordance with local legal regulations.
2.5
SAFETY INSTRUCTIONS
Warning:
All unit assembly operations must be strictly conducted only under safe, secure and zeropotential conditions.
Special Note:
When handling parts and components susceptible to electrical discharge, please
accurately observe all the relevant safety provisions.
(DIN EN 61340-5-1 / DIN EN 61340-5-2 refers)
10
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
3 INSTALLATION
3.1
MULTIFUNCTION UNIT
The device may be connected to a multifunction unit on the back by using a docking
interface.
INSTALLING THE MULTIFUNCTION UNIT
Pay attention when attaching the device on top of the multifunction unit, that the docking
plug, and the docking socket located at the Compact4 device, are safely connected with
each other. Make sure that the Compact4 device is properly attached to the multifunction
unit. (Figure 3)
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
11
User Manual Compact 4 V 1.2
Warning:
If this device is to be used in connection with a multifunction unit, the supplied screws
must be used in order to tightly connect the device to it.
The supplied type of screws is 4 x DIN 7984 M5 x 5, black.
12
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
3.2
INTERFACES OF THE COMPACT4 MULTIFUNCTION UNIT
COM SERIAL INTERFACE (RS 232)
The serial interface is also used for digital and analogue data transmission. The RS 232
interface can be connected by using a commercially available 9-pin SUB-D cable.
PIN NUMBER
SIGNAL NAME
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
Note:
This interface is not electrically isolated.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
13
User Manual Compact 4 V 1.2
CHANGING THE COM ADAPTER
The COM interface is equipped with an attached adapter (gender changer) in order to avoid
damage to the COM interface. You can replace this adapter, should it be damaged. Please
proceed as follows in order to replace the adapter:
1) Open the rubber cover of the Compact4 multifunction unit and subsequently loosen both
SUB-D bolts by using a suitable screw driver or socket wrench...
2) Once both SUB-D bolts are removed, the adapter (gender changer) can be pulled off.
3)
14
Attach
the
new
adapter
to
the
COM
interface.
Tighten
SUB-D bolts with a torque of NCM TO BE DEFINED and close the rubber cover.
both
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
USB CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection. The interface
complies with the USB 2.0 standard.
PIN NUMBER
SIGNAL NAME
VDC
D-
D+
GND
Note:
The three available USB interfaces give you the opportunity for a voltage output of 1.5V
on one of the USB interfaces at a time. This allows trouble-free operation of external
devices, like an external DVD drive. Both remaining ports output a voltage of 0.5V by
default in this case.
Note:
This interface is not electrically isolated.
MIL CONNECTOR:
The docking station is equipped with a MIL connector. This type of connector is used in
automotive industry, specifically in vehicle diagnostics. By using specific software, it allows
extracting and analysing data from the vehicle.
Note:
If the device is connected to a passenger car via the multifunction unit, the device can be
supplied with the required voltage from the vehicle.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
15
User Manual Compact 4 V 1.2
3.3
FUNCTIONS OF THE MULTIFUNCTION UNIT
ADJUSTABLE POSITIONING MECHANISM:
The viewing angle of the docking station can be adjusted by using the positioning
mechanism.
The positioning mechanism may be fixed in several notch positions at the multifunction unit.
16
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
3.4
EXTERNAL DEVICE DIMENSIONS
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
17
User Manual Compact 4 V 1.2
3.5
18
EXTERNAL DEVICE DIMENSIONS INCLUDING DOCKING STATION
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
4 COMMISSIONING
The power supply connection and interfaces of this device are installed at the side of case.
All supply leads and all required data leads have to be connected before starting
commissioning.
Warning:
The device must be switched off before connecting or disconnecting any cables in order to
prevent damage to the electronics!
The device may only be switched on after acclimatising to the ambient temperature in
order to avoid condensate accumulation. Make sure to meet the permissible voltage
requirements for this device.
After switching off and before switching on you must wait for at least 10 seconds.
Note:
The screen of a data cable must always be connected with the connector housing (EMC).
Under the embedded operating system, interfaces must explicitly be enabled and required
drivers must be installed fin order to be able to use them.
4.1
AVAILABLE INTERFACES
4.2
READINESS FOR OPERATION CHECKS
Accurately check the unit for any hidden damages possibly incurred during improper
transport and/or handling or wrong operation site and/or storage conditions (e.g. smoke
emissions or formation by the unit, etc.). If any damages are found, the unit must be
decommissioned or scrapped. Ensure that it is safe from accidental re-implementation.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
19
User Manual Compact 4 V 1.2
5 FRONT PANEL FUNCTIONS
5.1
STATUS INDICATORS
This device is equipped with different status LEDs in the front. These LEDs indicate current
events, like the system activity state, the current accumulator charge status and WLAN
activities.
SYSTEM LED INDICATORS
DISPLAY
BEHAVIOUR
DESCRIPTION
The device is not connected to any
power supply (power adapter /
accumulator)
Static
The device is connected to a power
supply (power adapter/accumulator)
and switched on
Flashes
The device is in suspend mode (this
mode can be set up using the
operating system, re-activation via
power button)
Static
Device is accessing the HDD
POWER LED INDICATORS
Device is not connected to any power
supply
Static
Device is supplied by the charged
accumulator
Static
Device is supplied from an external
power supply
Flashes
Internal accumulators of the device are
charged (device must be connected to
a power supply (power adapter)
Static
Device works with the accumulators'
residual capacity
Static
Device is not connected with a WLAN
network
Static
Device is connected with a WLAN
network
WLAN LED INDICATORS
20
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
Flashes
5.2
Device is connected with a WLAN
network and has data traffic
FRONT CONTROL KEYS
The keys on the front panel are occupied with the following functions by a specific driver in
the soft keyboard:
SYMBOL:
FUNCTION:
ON / OFF pushbutton for the device (approx. 1 second delayed)
Level 1:
Activate and deactivate the soft keyboard for letter/character input
using the touch screen
Level 2:
Increase the system volume.
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Decrease the system volume.
Level 1:
Freely allocateable, special function
Level 2:
Increase display brightness
Level 1:
Right mouse-key function
Level 2:
Decrease display brightness
Shift key (SHIFT) for activating the second keyboard level. This key
must be pressed simultaneously with the desired function key.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
21
User Manual Compact 4 V 1.2
Warning:
The front control keys should not be operated with a touch stylus but with the fingers,
only.
Note:
All function keys in the front panel, except for the ON / OFF pushbutton, have 2 function
levels. The primary function is activated by simply pushing the respective key. The
second function level (small symbol to the top right) can be activated each time by
pushing the Fn key first, and then additionally the desired function key. It is important to
keep the Fn key always pushed in order to activate the second function level.
Note:
If the software keyboard is not installed, only the functions for display settings and
volume control are active. The controller display will not be output on the display, in this
case. Above described functions are pre-set ex works.
5.3
TOUCH SCREEN
The control system is equipped with an analogue, resistive touch screen. The driver software
required for its use is already integrated in the respective operating system.
TOUCH STYLUS
Note:
This device is equipped with a supplied touch stylus for comfortably operating the touch
screen. This stylus should be used for all works on the device in order to avoid damage to
the display.
Warning:
The protective film on top of the touch screen must not be removed!
22
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
6 INTERFACES
6.1
20V DC POWER SUPPLY
TECHNICAL DATA OF THE POWER ADAPTER
•
Power consumption:
Max. 70 Watts
•
Input voltage:
100…240V AC
•
Mains frequency:
50…60Hz
•
Current consumption:
3.5A (230V AC)
•
Max. switch-on current:
< 60A (230V AC)
Note:
The typical power consumption of this device is indicated in the "Technical details"
chapter.
Warning:
This power adapter must never be connected with a Compact 3device. Likewise, the
Compact 4 device must never be operated with a Compact 3 power supply unit.
Note:
Only approved power cables (e.g. HO5VV-F, at least 3 x 1.00mm2) may be used.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
23
User Manual Compact 4 V 1.2
6.2
14.4V DC ACCUMULATOR OPERATING MODE
The device is equipped with two accumulator slots, by means of which the device can be
supplied with power, alternatively. It is provided with a hot swap function which allows you
to replace the accumulator without rebooting.
The accumulators are automatically charged in mains operation (20V).
Note:
If both accumulators are to be replaced while operating the unit, power supply must be
ensured by attaching the supplied power adapter. If you want to replace just one
accumulator, you can do this without attaching an external power supply.
ACCUMULATOR STATUS RETRIEVAL / REPLACEMENT
The Compact4 accumulators can be removed by using a mechanical ejector on the back of
the device.
24
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
The accumulator status can be retrieved by pushing a button on the accumulator. The
accumulator display will light up for a few seconds and show the current accumulator charge
status on a scale from 0 to 100. If the display lights red, this represents a weak
accumulator. If the display is green, it shows that the accumulator is fully charged. If the
device is in operating mode, the accumulator status can be retrieved by using the supplied
Battery Information & Diagnostics Tool.
Note:
The "Hardware specific software” chapter describes the Battery Information &
Diagnosis Tool, which can be used for retrieving the accumulator status while operating
the unit.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
25
User Manual Compact 4 V 1.2
6.3
USB CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection. The interfaces
comply with the USB 2.0 standard.
PIN NUMBER
SIGNAL NAME
VDC
D-
D+
GND
Note:
Two of the available USB connections (see red highlighting) offer the opportunity of
outputting a current of 1.5A on one of them at a time. This allows trouble-free operation
of external devices, like an external DVD drive. Both remaining ports output a current of
0.5A by default in this case.
26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
6.4
SD CONNECTOR
By using the SD Connector, the device can be connected to an Ethernet network (10/100
MBit). Data throughputs of 10MB can be achieved with a maximum cable length of 5m.
Note:
This interface does not allow booting via the network. If you want to boot the device via
the network connection, we recommend using the LAN interface.
PIN NUMBER
SIGNAL NAME
RxD+
RxD-
TxD+
TxD-
The SD Connect cable must be connected so that the red markers match.
For disconnecting the SD Connect cable, it must be pulled rearwards in the area marked in
green. This loosens the snap-in mechanism at the end of the plug.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
27
User Manual Compact 4 V 1.2
6.5
NETWORK CONNECTION (RJ45)
If the drivers required for functioning are installed on the device, the control system may be
integrated in an Ethernet network supporting the 10/100 MBit standard by using the
Ethernet 10/100BaseT network connector. Specifications of this network topology must be
observed in this case.
PIN NUMBER
6.6
SIGNAL NAME
TX +
TX -
RX +
NC
NC
RX -
NC
NC
EXPRESSCARD SLOT
The device is equipped with an ExpressCard slot, which supports the following ExpressCard
types.
28
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
6.7
MIC IN
An external microphone can be connected via the MIC IN socket on the device by means of
a 3.5mm cinch cable.
PIN NUMBER
SIGNAL NAME
Ground
GND
Signal, right-hand side
Signal, left-hand side
MICROPHONE IN FRONT PANEL
Additionally, the device has an internal microphone in the front panel. This microphone can
be configured by using the volume control integrated in the operating system.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
29
User Manual Compact 4 V 1.2
6.8
LINE OUT
By using the Line Out socket of this device and connecting via a 3.5mm cinch cable, a stereo
audio signal can be output to earphones or to external speakers.
6.9
PIN NUMBER
SIGNAL NAME
Ground
GND
Signal, right-hand side
Signal, left-hand side
WLAN
This device is equipped with a radio network card. If the operating system supports this card
by corresponding drivers, the device can be integrated in an Ethernet network with support
for 11 MBit or 54 MBit (802.11b/g compatible). Specifications of this network topology must
be observed in this case.
The device is equipped with a MiniPCI WLAN card including an Atheros chip.
If a device is delivered including operating system by ads-tec, all required device drivers will
also be integrated in the system. Under the "Windows XP Professional" and "Windows XP
Embedded" operating systems, the original "Atheros Client Utility (ACU)" will also be
installed, which can be used for defining new WLAN networks and WLAN connection
settings. The mentioned utility offers a large variety of settings, which in most cases will be
sufficient for meeting individual network requirements. However, the possibility for making
the following settings is lacking:
30
•
Setting the region (e.g. Germany, France, USA, etc.)
•
An ad-hoc channel setting, to be specified by region
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
7 HARDWARE-SPECIFIC SOFTWARE
This device is equipped with specific software tools, which allow monitoring of the operating
states.
BATTERY INFORMATION & DIAGNOSTICS TOOL
POWER STATUS
The starting page of the battery information tool gives information about the current
accumulator charge status. The lithium-ion accumulators are charged in parallel with the
20V power adapter connected. The charging progress is displayed on the right hand side for
both accumulator slots. The status display on the left shows the remaining accumulator
charging time.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
31
User Manual Compact 4 V 1.2
STATUS DETAILS
The Status Detail page lists all starting page data in a table.
STATIC INFORMATION
The "Static Information" tab displays all detail information, e.g. the manufacturer, and the
capacity of the lithium-ion accumulator.
32
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
DIAGNOSTICS
The Diagnostics tab gives information about the proper function and about the number of
used lithium-ion accumulators.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
33
User Manual Compact 4 V 1.2
BRIGHTNESS & VOLUME CONTROL
Brightness and volume can be adjusted by using the function keys in the front panel. The
function of the front keys is provided by a utility called "Genkey service". The actual
adjustment of brightness and volume is managed by the "bvcontrol.exe" utility. This utility
must be active in order to allow setting the brightness and volume by using the keys in the
front panel.
FAN CONTROL & INFORMATION TOOL
The Fan control & information tool monitors the function of the fan, as well as the current
temperature.
Warning:
Malfunction of a fan will be displayed through a popup window.
Note:
The fan RPM will only be shown if the fan function is active.
34
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
AUTOMATIC FRONT KEYS AND DISPLAY ILLUMINATION
SHOCK SENSOR
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
35
User Manual Compact 4 V 1.2
36
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
7.1
SOFT KEYBOARD
By using the soft keyboard, data can be entered via the touch screen like with an external
keyboard.
Note:
The soft keyboard of the Compact4 device can be delivered in 21 languages. Depending
on the selected language, the soft keyboard representation and function may vary. Basic
functions are identical with all languages. The following languages are available:
German / English (US) / English (UK) / French / Italian / Spanish / Portuguese / Finnish /
Turkish / Danish/ Swedish / Japanese / Korean / Greek / Czech / Polish / Romanian /
Russian / Serbian / Croatian / Hungarian
DEFAULT VIEW:
HOW TO OPERATE THE SOFT KEYBOARD FROM VERSION 3.11:
Activate and deactivate the soft keyboard for letter/character input
using the touch screen
Deactivate the soft keyboard
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
Switch to numeric key pad representation
Increase the soft keyboard transparency
Decrease the soft keyboard transparency
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
37
User Manual Compact 4 V 1.2
NUMERIC KEY-PAD VIEW:
Switch to representation of the function-key bar
FUNCTION-KEY BAR VIEW:
Note:
If a function is to be activated, which requires pressing two keys at the same time (e.g.
Alt + F4); these keys have to be pushed one after another at the soft keyboard, and the
special keys Shift, Alt and Strg must always be pushed first.
Due to differences in programming of a large variety of software, we cannot ensure that
the soft keyboard works properly with all software.
When deactivating the soft keyboard, the previously active state (alphanumeric / numeric
keys or function keys) will be stored and will be displayed when re-activating the
keyboard.
38
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
8 ACCESSORIES
8.1
DVD DRIVE / EXTERNAL TYPE
CONNECTION
The DVD drive can be connected to the Compact4 device by using the USB interface.
DRIVER INSTALLATION
The required drivers will be installed automatically as soon as the DVD drive is connected
with the USB interface.
FUNCTIONS
The Compact4 device must be switched on to open the drive. After pushing the Eject button,
the drawer jumps open and must be pulled out completely. The CD/DVD is now placed with
the opening on top of the centre piece and carefully pushed downwards until the disk holder
snaps in. Subsequently the drive must be pushed in.
Note:
The drive can also be opened by using a mechanical ejector without any power supply. In
order to do this, you'd have to push with a pointed object into the marked opening until
the drawer jumps open.
Note:
The DVD drive is of the slim-line drive type.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
39
User Manual Compact 4 V 1.2
8.2
SAFETY OF LASER PRODUCTS
This product has been designed and manufactured according to FDA regulations “title
21.CFR. chapter1, subchapter J.based on the radiation Control for Health and Safety Act of
1968”. And is classified as a class 1 laser product. There is no hazardous invisible laser
radiation during operation because invisible laser radiation emitted inside of this product is
completely confined in the protective housings.
The label required in this regulation is shown bellow.
Caution:
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Optical pickup
Type
Manufacturer
Laser output
Wavelength
Standard
TOP1100S
TopRay Technologies, Inc
Less than 0.5mW on the objective lens
770-800nm (CD)
645-662nm (DVD)
: IEC60825-1 : 2001
Caution:
Class 1M Visible and Invisible Laser Radiation when open. Do not view directly with optical
instruments.
Achtung:
Sichtbare und Unsichtbare Laserstrahlung Klasse 1M, wenn Abdeckung geöffnet. Nicht
direkt mit Optischen Instrumenten betrachten.
40
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
9 REGULATORY
EGULATORY APPROVALS
9.1
CERTIFICATIONS / TESTINGS
The Compact 4 system has the following certifications:
CE compatibility (class A)
UL/cUL201
EN61000-6-2
device complies with standard
EN61000-6-4
device complies with standard
Application for certification is filed
FCC permission
Application for certification is filed
GOST-R certificate
Application for certification will be filed
MIC certification
Application for certification will be filed
Application for WLAN certificates
for 802.11 a/b/g for the
EU countries
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
Application for certification in USA / Canada
2.400 MHz - 2483,5 MHz
5.150 MHz - 5.350 MHz
5.725 MHz – 5.875 MHz
Application for certification in Japan
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
Application for certification in Australia
2.400 MHz – 2.483,5 MHz
5.150 MHz – 5.350 MHz
5.470 MHz – 5.725 MHz
Note:
A respective conformity declaration for the authority in charge is available on request from
the manufacturer.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
41
User Manual Compact 4 V 1.2
9.2
ELECTROMAGNETIC COMPATIBILITY (EMC)
Certificate of acceptance in accordance with the Federal Electromagnetic Compatibility Act in
Germany ("EMVG") of 2007 (respectively the EMC Directive no. 2004/108/EC).
In accordance with the Federal Electromagnetic Compatibility Act in Germany, this device is
authorised to carry the EC conformity sign "CE". Liable party for this conformity declaration
is according to para. 5 of the "EMVG" legislation:
ads-tec GmbH
Raiffeisenstrasse 14
D – 70771 Leinfeld – Echterdingen
Information in accordance with "EMVG", para. 3, section (2) 2:
This device complies with the protective requirements according to EN 61000-6-2 and EN
61000-6-4, class A.
Any equipment of class A must be provided with the following warning message: "Warning! This is equipment of class A. This unit might cause radio interferences in living areas; in this
case the operator might be required to take suitable protective measures."
42
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
9.3
FCC-APPROVAL
Note:
This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry
Canada].
Operation is subject to the following two conditions:
this device may not cause harmful interference, and this device must accept any
interference received, including interference that may cause undesired operation.
Note:
Changes or modifications made to this equipment not expressly approved by ads-tec
GmbH may void the FCC authorization to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Note:
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of
0cm between the radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Note:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
43
User Manual Compact 4 V 1.2
10 TECHNICAL DETAILS
10.1 DISPLAY DATA
Display
13.3" TFT, WXGA 1280 x 800 pixels
Display colours
262,144 colours
Brightness
200 cd/m² at max (adjustable)
Touch screen
Resistive 5-wire touch screen
Contrast
400:1
10.2 COMPUTER DATA
Processor
Intel Pentium M Yonah ULV 1.06GHz Core Solo 423 (5.5W)
RAM
2GB DDR2 SODIMM PC2-5300
Chip set
Intel 855 GME
Graphic memory
A maximum of 64 MB, shared memory
Mass storage device
2.5" SATA 120 GB hard disk
Interfaces
at the base device: 3 x USB 2.0 (1 of which is recessed for
flash memory stick)
at the multifunction unit: 1x COM (SUB-D), 3x USB 2.0, 1x MIL
Network
1x Ethernet (10/100 MBit) RJ 45,
1x Ethernet (10/100 MBit) via SD connector
Wireless
WLAN, 802.11 b/g
Slots
1x Express card, wide slot
Sound
2x speakers, 1x microphone, 1x headphone out, 1x
microphone in
Power supply
20V DC +/- 20%
Accumulator
Li-Ion smart-battery accumulator with 14.4V and 32Wh, 2
accumulator slots
10.3 GENERAL DATA
44
External dimensions
355 mm x 261 mm x 41 mm (W x H x D)
Weight
approx. 3.0 kg
Protection class
IP 54
Power consumption
24 Watts (typical)
Max. switch-on current
7 Amperes (for 2ms)
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
User Manual Compact 4 V 1.2
11 SERVICE AND
AND SUPPORT
ads-tec and appointed partner companies offer you comprehensive maintenance and
support services, ensuring quick and competent support should you have any questions or
concerns with regard to ads-tec products and equipment.
ads-tec products may also be provided and installed by partner companies. Such devices
may have customised configurations. Should any questions arise with regard to such specific
settings and software installations, please contact the system supplier in question as ads-tec
will not be able to reply to such questions.
ads-tec does not provide support services for any device or unit that was not bought directly
from ads-tec. In any such case, maintenance and support is provided solely by the partner
company that supplied the device or unit.
11.1 ADS-TEC SUPPORT
The ads-tec support team is available for inquiries by direct customers between 8:30am and
5:00pm, Monday to Friday. The support team can be reached via phone, fax or email.
Tel:
+49 (0) 711 / 45894-500
Fax:
+49 (0) 711 / 45894-990
Email: info@ads-tec.com
11.2 COMPANY ADDRESS
ads-tec
Automation Daten- und Systemtechnik GmbH
Raiffeisenstraße 14
70771 Leinfelden-Echterdingen
Germany
Tel:
+49 (0) 711 / 45894-0
Fax:
+49 (0) 711 / 45894-990
Email: info@ads-tec.de
Web:
www.ads-tec.de
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
45
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Fill forms, Print high-res Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2008:04:08 13:59:49+02:00 Creator Tool : PDFCreator Version 0.9.3 Modify Date : 2008:04:10 12:22:37+02:00 Metadata Date : 2008:04:10 12:22:37+02:00 Format : application/pdf Description : Creator : Schuessler Title : Keywords : Producer : GPL Ghostscript 8.54 Document ID : uuid:b7134bba-effd-495a-a6f4-bd1ac7d411fb Instance ID : uuid:c8b04537-4bec-4545-87ba-c74026fb4dd5 Page Count : 45 Subject : Author : SchuesslerEXIF Metadata provided by EXIF.tools