elero Antriebstechnik 285XX0901 RC System for rolling shutters / awnings and venetian blinds User Manual Combio 915 120 V USA CA Combio 915 USA 11 05

Download:
Mirror Download [FCC.gov]
Document ID	1292672
Application ID	j7fMW7ibhGOFS/Ik4ixovg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.54kB (406752 bits)
Date Submitted	2010-06-09 00:00:00
Date Available	2010-06-09 00:00:00
Creation Date	2010-05-20 14:46:46
Producing Software	Acrobat Distiller 9.3.2 (Macintosh)
Document Lastmod	2010-05-20 14:46:46
Document Title	Combio-915/120 V USA/CA:Combio-915 USA 11.05
Document Creator	QuarkXPress 7.31
Document Author:	G5_Protype

Combio-915/120 V
Combio-915 JA 285000906
Combio-915 RM 285200906
elero
Bedienungsanleitung
Bitte bewahren Sie die Bedienungsanleitung auf !
Operating Instructions
Please keep the instructions in a safe place.
PT Instrucciones de servicio
¡Por favor, conserve estas instrucciones de servicio!
PT Instruções de serviço
Por favor conserve as instruções em lugar seguro.
elero GmbH
Antriebstechnik
Linsenhofer Str. 59–63
D-72660 Beuren
Tel.: +49 (0) 7025-13-01
Fax: +49 (0) 7025-13-212
www.elero.com
info@elero.de
181106606/0510 EN/ES/PT
Safety tips
USA
CA
Contents
Safety tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA/CA- 2
Important safety indications!
Observe the following Instructions.
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA/CA- 3
Use in accordance with the regulations . . . . . . . . . . . USA/CA- 3
Optimal use of the radio signal . . . . . . . . . . . . . . . . . USA/CA- 4
Mounting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA/CA- 5
Combio-915 JA for venetian blind drives . . . . . . USA/CA- 6
Combio-915 RM for tubular motors . . . . . . . . . . . USA/CA- 7
Connection and installation . . . . . . . . . . . . . . . . . . . . . . USA/CA- 8
Combio-915 JA for venetian blind drives . . . . . . USA/CA- 8
The Combio-915 RM for elero tubular motors
with plug-in cable (limit switch drive) . . . . . . . . . . USA/CA- 9
Combio-915 RM for tubular motors with
plug-in cable (ACS-E electronic drive). . . . . . . . . USA/CA-10
Warning!
Danger of injury due to electric shocks.
Connections to the 120 V mains supply must
be carried out by authorized, specialized
personnel.
• Check the installations regularly for wear and
tear or damage.
• The regulations stipulated by the local power
supply company should be observed during
connection work, as well as the regulations for
wet and damp areas in accordance with
NFPA.
• Observe country-specific regulations.
• Only use unaltered elero original parts.
Combio-915 RM for tubular motors
with fixed cable (limit switch drive) . . . . . . . . . . . . USA/CA-11
Combio-915 RM for elero tubular motors
with fixed cable (CSM-E electronic drive)
for textile sun protection. . . . . . . . . . . . . . . . . . . . . . . USA/CA-12
• Ensure that nobody is within the vicinity of the
installation until it is brought to a standstill.
• When carrying out work on the installation
(e.g. maintenance), always disconnect the
installation from the mains supply.
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA/CA-13
• Keep children away from controls.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USA/CA-13
• The control unit must be installed so that it is
not exposed to rain.
EC-Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . USA/CA-14
USA/CA-1
USA/CA-2
regulations
Optimal use of the radio signal
USA
CA
General/Use in accordance with the
General information
Optimal use of the radio signal
The Combio-915 JA/RM radio receiver allows the extension of
alternating current drives to a radio drive.
• Do not bend the antenna.
Use in accordance with the regulations
• If reception is poor, adjust the antenna.
The Combio-915 JA/RM can only be used for controlling roller
shutters and sun protection systems such as venetian blinds.
• Install the antenna so that it is as exposed as possible.
• Please observe that radio equipment cannot be operated in
areas with a high interference risk level (e.g. hospitals, airports).
• Using a number of receivers may cause interference.
• The remote control is only allowed for devices and installations in
which a malfunction in the hand-held transmitter or the receiver
does not represent a threat to persons, animals or things or for
installations in which this risk is excluded by other safety
systems.
• Do not shorten or extend the antenna.
• Antenna is not to rest on metal.
Note:
Radio installations which transmit with the same
frequency can cause reception interferences.
Please observe that the radio signal range is restricted
by the legislator and structural measures.
• The user does not have any protection from interferences from
other telecommunication and terminal equipment (e.g. including
radio equipment which is operated in accordance with the corresponding regulations in the same frequency range).
• Connect radio receivers only to the devices and installations
authorized by the manufacturer.
USA/CA-3
USA/CA-4
Combio-915 JA
Mounting options
Combio-915 JA for venetian blind drives (28 500.0001)
Combio-915 JA
1. Put the Combio-915 into the mounting
clamp.
Combio
with clip
2. Fasten the Combio-915
JA + clamp to the inside
or outside of the channel.
USA
CA
Mounting options
The Combio-915 JA is suitable for the use with venetian blind
drives.
In order to carry out an exact slat tilting, the Combio-915 JA has a
dead-man operating mode. If the button on the hand-held transmitter is pressed until the LED goes out, the receiver activates the
self-locking operating mode.
The handheld transmitter can be used to save an intermediate
position and tilting position for the slats (D refer to the transmitter
instructions).
Antenna
Combio with
clip inner
Combio with
clip outer
Drive
Mounting options
Mains
230 V/50 Hz N
PE
Combio-915 RM
Combio-915
JA
1. Stick the enclosed adhesive strip onto the
Combio-915 RM.
Note: Do not shorten or lengthen the antenna.
Combio
with clip
USA/CA-5
USA/CA-6
Connection and installation (Combio-915 JA)
Combio-915 RM for tubular motors (28 520.0001)
Combio-915 JA for venetian blind drives
The Combio-915 is suitable for the use with tubular motors for
roller shutters and sun protection systems.
If a command is sent, the receiver immediately activates the selflocking operating mode.
The hand-held transmitter can be used to program an intermediate
position.
For sun protection systems it is possible to additionally program a
fabric tautening and a ventilation position for roller shutters
(D refer to the transmitter instructions).
1. Put the drive into operation with the installation cable and
set the upper and lower limit switch.
2. Move the hangings with the installation cable to an
intermediate position.
3. Switch off the mains voltage.
4. Unplug the installation cable.
5. Connect the female Hirschmann-plug of the radio receiver
with the drive plug.
6. Connect the Hirschmann-plug of the radio receiver with the
female plug of the mains cable.
Antenna
Drive
Mains
230 V/50 Hz N
USA
CA
Combio-915 RM
1~
1 2 3
Combio-915
RM
Antenna
PE
Pin
designation
PE
Wire colour
Brown
Blue
Green/yellow
Note: Do not shorten or lengthen the antenna.
USA/CA-7
Mains
230 V/50 Hz N
PE
Combio-915
JA
7. Fasten the radio receiver.
8. Switch the mains voltage on again.
9. Programme the transmitter
(D refer to the transmitter instructions).
USA/CA-8
Connection and installation (Combio-915
The Combio-915 RM for elero tubular motors with plug-in
cable (limit switch drive)
Combio-915 RM for tubular motors with plug-in cable
(ACS-E electronic drive)
1. Switch off the mains voltage.
1. Switch off the mains voltage.
2. Press the locking mechanism of the drive plug towards the
cable with a screwdriver.
3. Pull out the plug.
3. Pull out the plug.
4. Plug the motor cable of the radio receiver into the drive.
5. Connect the mains cable of the Combio-915 RM correctly with
the mains voltage.
1~
Mains
230 V/50 Hz N
Combio-915
RM
Wire colour
Brown
Blue
Green/yellow
6. Fasten the radio receiver.
7. Switch the mains voltage on again.
8. Programme the transmitter (D refer to the transmitter
instructions).
9. Mount the hangings and set the limit switch.
USA/CA-9
4. Plug the motor cable of the radio receiver into the drive.
5. Connect the mains cable of the Combio-915 RM correctly with
the mains voltage.
1~
Antenna
PE
Pin
designation
PE
2. Press the locking mechanism of the drive plug towards the
cable with a screwdriver.
Mains
230 V/50 Hz
PE
Antenna
Combio-915
RM
Pin
designation
PE
Wire colour
Brown
Blue
Green/yellow
6. Fasten the radio receiver.
7. Switch the mains voltage on again.
8. Programme the transmitter (D refer to the transmitter
instructions).
Note: Rotate the winding shaft manually in the corresponding
direction.
9. Mount the hangings and operate the drive in the self-programming mode.
USA/CA-10
USA
CA
Connection and installation (Combio-915 RM)
Connection and installation
(Combio-915 RM for CSM-E)
Combio-915 RM for tubular motors with fixed cable
(limit switch drive)
Combio-915 RM for elero tubular motors with fixed cable
(CSM-E electronic drive) for textile sun protection.
1. Switch off the mains voltage.
Note: CSM-E drives must not be connected using the connector
located on the Combio-915 RM.
2. Cut off the plug of the radio receiver.
3. Prepare the cable for connection (remove cable jacket and
strip).
4. Connect the motor cable of the drive and the cable of the
Combio-915 RM correctly (connect the same colours).
5. Connect the mains cable of the Combio-915 RM correctly with
the mains voltage.
PE
br.
bl.
1~
Pin
designation
B/V
V/B
PE
Wire colour
Pin
designation
PE
Wire colour
Brown
Black
Blue
Green/yellow
1. Put the drive into operation with the installation cable
(programme the end positions).
2. Move the hangings with the installation cable to an intermediate
position.
3. Switch off the mains voltage.
4. Disconnect the installation cable.
5. Cut off the plug of the radio receiver.
6. Prepare the cable for connection (remove cable jacket and strip).
7. Connect the motor cable of the drive and the cable of the
Combio-915 RM correctly (connect the same colours).
8. Connect the mains cable of the Combio-915 RM correctly with
the mains voltage.
Antenna
PE
Combio-915
RM
PE
br.
bl.
Mains
230 V/50 Hz
1~
Brown
Blue
Green/yellow
6. Fasten the radio receiver.
7. Switch the mains voltage on again.
8. Programme the transmitter (D refer to the transmitter
instructions).
9. Mount the hangings and set the limit switch, provided that the limit
switches have not already been set using the installation cable.
USA/CA-11
Antenna
Mains
230 V/50 Hz
PE
Combio-915
RM
Pin
designation
B/V
V/B
PE
Wire colour
Pin
designation
PE
Wire colour
Brown
Black
Blue
Green/yellow
Brown
Blue
Green/yellow
10. Fasten the radio receiver.
11. Switch the mains voltage on again.
12. Programme the transmitter (D refer to the transmitter
instructions).
USA/CA-12
USA
CA
Connection and installation (Combio-915 RM)
Technical data
EC-Declaration of conformity
E C - D E C LARAT I O N O F C O N F O R M I T Y
Combio-915 JA
Combio-915 RM
(venetian blind drives) (tubular motors)
Nominal voltage
120 V
120 V
Frequency
60 Hz
60 Hz
Max.
450 W
450 W
Protection class
IP 54
IP 54
Permitted
ambient
temperature
–20 to +80°C
Radio frequency
–20 to +80°C
915 MHz frequency band
Mains cable
0,5 m with
Hirschmann plug
3m
Motor cable
0,25 m with
0,25 m with
Hirschmann female plug plug
Dimensions in mm L 100 x B 44 x H 15
L 100 x B 44 x H 15
Max. number
of transmitters
16
We hereby declare that the following mentioned product/s meet/s
the standards of the European Community.
Product designation: ProLine
x Combio-868/ -915/ -433 all versions
x VarioTec-868 /-915 all versions
x Revio-868 all versions
x AeroControl-868
x UniLogic-868/ -915
Description:
Radio receiver for controlling roller shutters,
blinds and other shading systems
The conformity of the above mentioned products with the relevant
requirements is approved by the following directives and standards:
16
Troubleshooting
Problem
Cause
Solution
No radio
reception
1. Transmitter is
1. Program the
not programmed.
transmitter.
2. No mains
2. Switch on the mains
voltage.
supply again.
Bad radio
reception
Unsuitable receiver Change the location of
position.
the receiver or the antenna.
Inverted sense Sense are program- Delete transmitter and
of rotation
med incorrectly.
program correctly.
USA/CA-13
EMC Directive 2004/108/EC
EN 60335-1, EN 61000-6-2,
EN 61000-6-3, EN 61000-4-5
Low Voltage Directive 2006/95/EC
EN 61000-4-4, EN 61000-4-2
EN 61000-4-11, EN 61000-4-5
R&TTE-Directives 1999/5/EC
ETSI EN 301 489-3 V1.4.1
ETSI EN 300 220-3 V2.3.1
DIN EN 60730-1 (VDE 0631 part 1);
EN 30730-1 +A1 +A2 +A11 bis A17
DIN EN 60730-2-7 (VDE 0631 part 2-7);
EN 60730-2-7 +A1 +A11 +A12 +A13 +A14
Beuren, 29.12.2009
Ulrich Seeker
– CE Officer –
– Representative –
elero GmbH
Antriebstechnik
Linsenhofer Str. 59–63
D-72660 Beuren
USA/CA-14
USA
CA
Technical data/Troubleshooting

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 8
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Creator Tool                    : QuarkXPress 7.31
Create Date                     : 2010:05:20 14:46:46+02:00
Modify Date                     : 2010:05:20 14:46:46+02:00
Title                           : Combio-915/120 V  USA/CA:Combio-915  USA  11.05
Creator                         : G5_Protype
Producer                        : Acrobat Distiller 9.3.2 (Macintosh)
Author                          : G5_Protype

EXIF Metadata provided by EXIF.tools